[Impish] Unable to boot rpi3b and cm3+ after upgrade to kernel 5.13.0-1010.11-raspi

[Gavin Lin]

[Description]
Unable to boot rpi3b and cm3+ after upgrade to kernel 5.13.0-1010.11-raspi.

Fail rate: 12 times out of 14 attempts

[Steps to reproduce]
1. Flash image (see additional information)
2. Boot into system
3. apt dist-upgrade all packages and reboot
4. Enable proposed repository
5. apt install linux-raspi
6. Reboot

[Actual result]
Device does not boot into system

[Expected result]
Boot into system successfully

[Additional information]
Hardware: rpi3 and cm3+
Image: ubuntu-21.10-preinstalled-server-arm64+raspi.img.xz
       ubuntu-21.10-preinstalled-server-armhf+raspi.img.xz
Kernel Version: 5.13.0-1010.11-raspi

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux-raspi/5.13.0-1010.12 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-impish' to 'verification-done-impish'. If the problem still exists, change the tag 'verification-needed-impish' to 'verification-failed-impish'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Juerg Haefliger (juergh)]

Verificaton done by CERT.

[Launchpad Janitor (janitor)]

This bug was fixed in the package linux-raspi - 5.13.0-1010.12

---------------
linux-raspi (5.13.0-1010.12) impish; urgency=medium

  * impish/linux-raspi: 5.13.0-1010.12 -proposed tracker (LP: #1950142)

  * [Impish] Unable to boot rpi3b and cm3+ after upgrade to kernel
    5.13.0-1010.11-raspi (LP: #1950117)
    - firmware: raspberrypi: Partially revert 'firmware: bcm2835: Support
      ARCH_BCM270x'

  * Packaging resync (LP: #1786013)
    - [Packaging] update Ubuntu.md

  * HDMI output freezes under current/proposed impish kernels (LP: #1946368)
    - Revert "drm/vc4: Increase the core clock to a minimum of 500MHz"
    - Revert "drm/vc4: Increase the core clock based on HVS load"
    - Revert "drm/vc4: fix vc4_atomic_commit_tail() logic"
    - Revert "drm: Introduce a drm_crtc_commit_wait helper"
    - Revert "drm/vc4: kms: Convert to atomic helpers"
    - Revert "drm/vc4: kms: Remove async modeset semaphore"
    - Revert "drm/vc4: kms: Remove unassigned_channels from the HVS state"
    - Revert "drm/vc4: kms: Wait on previous FIFO users before a commit"
    - drm/vc4: Increase the core clock based on HVS load
    - drm/vc4: Increase the core clock to a minimum of 500MHz

  [ Ubuntu: 5.13.0-21.21 ]

  * impish/linux: 5.13.0-21.21 -proposed tracker (LP: #1947347)
  * It hangs while booting up with AMD W6800 [1002:73A3] (LP: #1945553)
    - drm/amdgpu: Rename flag which prevents HW access
    - drm/amd/pm: Fix a bug communicating with the SMU (v5)
    - drm/amd/pm: Fix a bug in semaphore double-lock
  * Add final-checks to check certificates (LP: #1947174)
    - [Packaging] Add system trusted and revocation keys final check
  * No sound on Lenovo laptop models Legion 15IMHG05, Yoga 7 14ITL5, and 13s
    Gen2 (LP: #1939052)
    - ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i
      15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.
    - ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s
      Gen2
  * Check for changes relevant for security certifications (LP: #1945989)
    - [Packaging] Add a new fips-checks script
    - [Packaging] Add fips-checks as part of finalchecks
  * BCM57800 SRIOV bug causes interfaces to disappear (LP: #1945707)
    - bnx2x: Fix enabling network interfaces without VFs
  * CVE-2021-3759
    - memcg: enable accounting of ipc resources
  * [impish] Remove the downstream xr-usb-uart driver (LP: #1945938)
    - SAUCE: xr-usb-serial: remove driver
    - [Config] update modules list
  * Fix A yellow screen pops up in an instant (< 1 second) and then disappears
    before loading the system (LP: #1945932)
    - drm/i915: Stop force enabling pipe bottom color gammma/csc
  * Impish update: v5.13.18 upstream stable release (LP: #1946249)
    - Linux 5.13.18
  * Impish update: v5.13.17 upstream stable release (LP: #1946247)
    - locking/mutex: Fix HANDOFF condition
    - regmap: fix the offset of register error log
    - regulator: tps65910: Silence deferred probe error
    - crypto: mxs-dcp - Check for DMA mapping errors
    - sched/deadline: Fix reset_on_fork reporting of DL tasks
    - power: supply: axp288_fuel_gauge: Report register-address on readb / writeb
      ...

[Launchpad Janitor (janitor)]

This bug was fixed in the package linux-raspi - 5.15.0-1002.2

---------------
linux-raspi (5.15.0-1002.2) jammy; urgency=medium

  * jammy/linux-raspi: 5.15.0-1002.2 -proposed tracker (LP: #1958834)

  * Packaging resync (LP: #1786013)
    - [Packaging] update Ubuntu.md
    - debian/dkms-versions -- update from kernel-versions (main/master)

  * Kernel fails to boot in ScalingStack (LP: #1959102)
    - [Config] raspi: Set VIRTIO_PCI=m
    - [Config] raspi: Set ACPI=y

  * jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-01-24)
    (LP: #1958854)
    - brcmfmac: firmware: Fix crash in brcm_alt_fw_path
    - ARM: dts: Remove VL805 USB node from CM4 dts
    - mfd: simple-mfd-i2c: Add configuration for RPi POE HAT
    - pwm: raspberrypi-poe: Add option of being created by MFD or FW
    - power: rpi-poe: Drop CURRENT_AVG as it is not hardware averaged
    - power: rpi-poe: Add option of being created by MFD or FW
    - defconfigs: Add MFD_RASPBERRYPI_POE_HAT to Pi defconfigs.
    - dtoverlays: Add option for PoE HAT to use Linux I2C instead of FW.
    - drivers: bcm2835_unicam: Disable trigger mode operation
    - arm: Remove spurious .fnend directive
    - drm/vc4: Fix deadlock on DSI device attach error
    - drm/vc4: dsi: Correct max divider to 255 (not 7)
    - defconfig: Add BACKLIGHT_PWM to bcm2709 and bcmrpi defconfigs
    - dtoverlays: Add pwm backlight option to vc4-kms-dpi-generic
    - dtoverlays: Correct [h|v]sync_invert config in vc4-kms-dpi-generic
    - ARM: dts: BCM2711 AON_INTR2 generates IRQ edges
    - update rpi-display-overlay.dts pins for 5.10+

  [ Ubuntu: 5.15.0-18.18 ]

  * jammy/linux: 5.15.0-18.18 -proposed tracker (LP: #1958638)
  * CVE-2021-4155
    - xfs: map unwritten blocks in XFS_IOC_{ALLOC, FREE}SP just like fallocate
  * CVE-2022-0185
    - SAUCE: vfs: test that one given mount param is not larger than PAGE_SIZE
  * [UBUNTU 20.04] KVM hardware diagnose data improvements for guest kernel -
    kernel part (LP: #1953334)
    - KVM: s390: add debug statement for diag 318 CPNC data
  * OOB write on BPF_RINGBUF (LP: #1956585)
    - SAUCE: bpf: prevent helper argument PTR_TO_ALLOC_MEM to have offset other
      than 0
  * Miscellaneous Ubuntu changes
    - [Config] re-enable shiftfs
    - [SAUCE] shiftfs: support kernel 5.15
    - [Config] update toolchain versions
  * Miscellaneous upstream changes
    - vfs: fs_context: fix up param length parsing in legacy_parse_param

linux-raspi (5.15.0-1001.1) jammy; urgency=medium

  * Missing overlays/README (LP: #1954757)
    - SAUCE: Install overlays/README

  * dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454)
    - SAUCE: arm: dts: Add 'brcm,bcm2835-pl011' compatible for uart2-5

  * jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-01-14)
    (LP: #1958146)
    - clk: bcm-2835: Pick the closest clock rate
    - clk: bcm-2835: Remove rounding up the dividers
    - drm/vc4: hdmi: Set a default HSM rate
    - drm/vc4: hdmi: Move the HSM clock enable to runtime_pm
    - drm/vc4: hdmi: Make sure the controller is powered in detect
    - drm/vc4: hdmi: Make sure the controller is powered up during bind
    - drm/vc4: hdmi: Rework the ...