Comment 3 for bug 611634

This bug was fixed in the package linux-mvl-dove - 2.6.32-209.25

---------------
linux-mvl-dove (2.6.32-209.25) lucid-proposed; urgency=low

  [ Stefan Bader ]

  * Rebased to 2.6.32-24.42

  [ Eric Miao ]

  * Sync config with Dove LSP 5.3.2
    - LP: #611634

  [ Upstream Kernel Changes ]

  * Revert "erratum of VLDR instruction bug in Thumb-2 mode"
    - LP: #611634
  * KG2: Add input/output timing auto-configuration functions (daemon
    required)
    - LP: #611634
  * AV-D1 X0 EC key driver
    - LP: #611634
  * move VGA EDID to i2c bus 1 (avd1r2 ECN6)
    - LP: #611634
  * dove: add some drivers and code dependency on MV_HAL_DRIVERS_SUPPORT
    - LP: #611634
  * Hwmon: Add support for setting the Overheat and Overcool temperature
    thresholds.
    - LP: #611634
  * chromium : enable CONFIG_SECURITY_FILE_CAPABILITIES in dove_defconfig
    - LP: #611634
  * chromium : enable CONFIG_BLK_DEV_DM and CONFIG_DM_CRYPT to let
    cryptohome work
    - LP: #611634
  * pmu: reduce code to make it fit into sram
    - LP: #611634
  * refine the mechanism for multiple lcd controller to store color key
    related registers when suspending.
    - LP: #611634
  * Support for command-line tool: kg2cfg
    - LP: #611634
  * ANX7150: Fix screen displays on and off several times for some HDMI TVs
    - LP: #611634
  * Hide AD9889 debug message
    - LP: #611634
  * usb: fix issue when USB host ask for string descriptor and USB device
    answer with exact 128 bytes.
    - LP: #611634
  * dove: add support for the temporary DB-88AP510-BP-B board
    - LP: #611634
  * dove: add support for mpp modes used by DB-88AP510-BP-B board
    - LP: #611634
  * sound: added codec driver for ALC655
    - LP: #611634
  * sound: cleaned compilation warning in dove avengers ac97
    - LP: #611634
  * sound: add board support for AC97 driver for dove-db-b board
    - LP: #611634
  * mv_sata: fix bug in the scsi translation layer
    - LP: #611634
  * mvSata: add support for KW2 sata
    - LP: #611634
  * Exernal VGA clock for Dove DB
    - LP: #611634
  * NAND: Driver reorganization and support for new 24bit ECC devices
    - LP: #611634
  * NAND: change read delay from absolut to RnB based
    - LP: #611634
  * VMETA PM function: add a wait queue for syncing the vmeta
    suspend/resume
    - LP: #611634
  * dove: enable the new nand driver
    - LP: #611634
  * dove: fix power management support for new db board
    - LP: #611634
  * galcore: sync with gc600_driver
    - LP: #611634
  * dove: add LFE and Surround dai to dove db-b
    - LP: #611634
  * convert idt clock generator to i2c platform driver
    - LP: #611634
  * dove giga: add wake on lan support
    - LP: #611634
  * dove: set gpio #1 to 1 to driver the giga phy reset
    - LP: #611634
  * dove: fix build issue in clock.h
    - LP: #611634
  * dove: add clk_dev insterface to the idt clock generator
    - LP: #611634
  * dove: enable the idt clock generator driver
    - LP: #611634
  * dove LCD: add support for using external clk reference for A0
    - LP: #611634
  * remove unused code
    - LP: #611634
  * avoid phy reset on resume when wol enabled
    - LP: #611634
  * dove: fix SPI flash model and size found on db board
    - LP: #611634
  * dove: fix typo in dove-db mpp's description
    - LP: #611634
  * dove: fix sdio workaround to config all sd gpio's as input
    - LP: #611634
  * sdhci-mv: fix bug when that caused to toggle the wrong bit in the
    function select register
    - LP: #611634
  * NAND: PIO support for naked symantics
    - LP: #611634
  * NAND: changes to adapt to Uboot driver
    - LP: #611634
  * NAND: Bus timing optimizations for the Samsung K9HBG08U1A
    - LP: #611634
  * dove sound: enable surround and center outputs on Realtek 655 codec for
    any channels number
    - LP: #611634
  * fix out of memory problem when playing moives and enter display blank
    mode.
    - LP: #611634
  * fix EDID issue: LCD0 get edid from I2C 0x3f, LCD1 from I2C 0x50.
    (support E-EDID feature)
    - LP: #611634
  * remove unwanted space.
    - LP: #611634
  * Add dynamic detect monitor connection and get EDID information.
    - LP: #611634
  * add fake EDID for LCD panel on LCD0
    - LP: #611634
  * dove: update debugger reset/unreset code in deepidle code for Dove-A0
    - LP: #611634
  * dove sound: disble debug mode in RealTek 655 codec
    - LP: #611634
  * video: enable building the adi9889 display driver as module
    - LP: #611634
  * video: make the adi9889 detect i2c client (edid or ) using driver_data
    instead of i2c address
    - LP: #611634
  * dove: add the adi9889 i2c device to dove db board
    - LP: #611634
  * dove db: support for adi9889 HDMI to DVI module
    - LP: #611634
  * video: add ths display driver
    - LP: #611634
  * dove db: add ths8200 and board parameter for the LCD2DVI module
    - LP: #611634
  * galcore: sync Makefile
    - LP: #611634
  * bmm : sync with bmm-lib
    - LP: #611634
  * idt clock: add error messages
    - LP: #611634
  * idt clock: add sysfs file for each output clock
    - LP: #611634
  * adi9889 display: enable 1080i mode
    - LP: #611634
  * dove: add support for 88AP510 rev A0
    - LP: #611634
  * idt clock: use i2c messages for reading
    - LP: #611634
  * idt clock: configure the Loop filter
    - LP: #611634
  * dove pm: fix build error when mv6xxx i2c expander disabled
    - LP: #611634
  * idt clock: disable pll's by default
    - LP: #611634
  * dovefb: disable external clock when entering blank mode
    - LP: #611634
  * dove: support using external lcd clocks for dove db
    - LP: #611634
  * mtd nand: fix bug in orion_nfs_hal when addressing orion_nfc_info
    structure
    - LP: #611634
  * dove: fix bug in clk setting from command line
    - LP: #611634
  * dove: enable co-processor dual issue mode for Dove rev. A0
    - LP: #611634
  * tools: add tool for reading/writing ethernet phy registers
    - LP: #611634
  * erratum of VLDR instruction bug in Thumb-2 mode. The workaround should
    not affect by the setting of ai_usermode.
    - LP: #611634
  * Staging: android: binder: Create dedicated workqueue for binder
    deferred work
    - LP: #611634
  * dove: skip VLDR Thumb errara workaround for the cpu revisions where
    that bug is fixed
    - LP: #611634
  * DOVE PM: Deep-Idle debugger reset fix in A0
    - LP: #611634
  * dove: enable DeepIdle feature by default
    - LP: #611634
  * dove: make the LCD clk settings depend on A0 revision of the chip
    - LP: #611634
  * dove: the DB revision B board have the same ID is DB rev A boards
    - LP: #611634
  * dove: fixed bug in the PMU interrupts handler when clearing the cause
    register
    - LP: #611634
  * adi display: keep the default edid address
    - LP: #611634
  * dove: set the edid information for all machines
    - LP: #611634
  * GC600: Fix bug that cause to crash when doing hibernate Driver tries to
    enable clock gating during GPU hardware initialization. CPU needs to
    stall a little time to wait for GPU ready
    - LP: #611634
  * Dove PM: invalidate L2 entry that get filled due to temporary mapping
    - LP: #611634
  * dove: use read modify write when updating the Auxiliary Funcion modes
    register
    - LP: #611634
  * dove: print the value of Auxiliary Functional Modes Control
    - LP: #611634
  * dove: use marvell toolchain for building the tools
    - LP: #611634
  * dove: update support for the SB videoplug board
    - LP: #611634

  [ Ubuntu: 2.6.32-24.42 ]

  * (pre-stable) drm/i915: add PANEL_UNLOCK_REGS definition
    - LP: #561802, #578673
  * (pre-stable) drm/i915: make sure eDP panel is turned on
    - LP: #578673
  * (pre-stable) drm/i915: make sure we shut off the panel in eDP configs
    - LP: #578673
 -- Stefan Bader <email address hidden> Fri, 20 Aug 2010 16:16:39 +0200