[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Fri Feb 1 04:59:50 UTC 2008 (Ubuntu 2.6.22-14.51-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4e50 [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F67F0 checksum 0 [ 0.000000] ACPI: RSDP 000F67F0, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: DSDT 3FFF30C0, 3E29 (r1 GBT AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF6F00, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:2 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:2 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Built 1 zonelists. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=6f7dc464-d272-497f-9e7c-9d95fc6065c3 ro vga=791 ro [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2411.690 MHz processor. [ 25.856580] Console: colour dummy device 80x25 [ 25.857029] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 25.857459] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 25.888427] Memory: 1027112k/1048512k available (2015k kernel code, 20764k reserved, 916k data, 364k init, 131008k highmem) [ 25.888445] virtual kernel memory layout: [ 25.888446] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 25.888448] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 25.888450] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 25.888452] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 25.888453] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 25.888454] .data : 0xc02f7e66 - 0xc03dce84 ( 916 kB) [ 25.888455] .text : 0xc0100000 - 0xc02f7e66 (2015 kB) [ 25.888470] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 25.888514] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 25.968428] Calibrating delay using timer specific routine.. 4827.36 BogoMIPS (lpj=9654739) [ 25.968459] Security Framework v1.0.0 initialized [ 25.968469] SELinux: Disabled at boot. [ 25.968485] Mount-cache hash table entries: 512 [ 25.968645] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [ 25.968658] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 25.968663] CPU: L2 cache: 512K [ 25.968667] CPU: Physical Processor ID: 0 [ 25.968671] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 [ 25.968683] Compat vDSO mapped to ffffe000. [ 25.968699] Checking 'hlt' instruction... OK. [ 25.984528] SMP alternatives: switching to UP code [ 25.985003] Early unpacking initramfs... done [ 26.346435] ACPI: Core revision 20070126 [ 26.346500] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 26.349704] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 05 [ 26.349726] SMP alternatives: switching to SMP code [ 26.349859] Booting processor 1/1 eip 3000 [ 26.359904] Initializing CPU#1 [ 26.439768] Calibrating delay using timer specific routine.. 4823.56 BogoMIPS (lpj=9647124) [ 26.439778] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [ 26.439790] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 26.439793] CPU: L2 cache: 512K [ 26.439795] CPU: Physical Processor ID: 0 [ 26.439798] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 [ 26.440013] CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 05 [ 26.440074] Total of 2 processors activated (9650.93 BogoMIPS). [ 26.440208] ENABLING IO-APIC IRQs [ 26.440398] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 26.587699] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 26.607694] Brought up 2 CPUs [ 26.655096] migration_cost=149 [ 26.655302] Booting paravirtualized kernel on bare hardware [ 26.655375] Time: 3:14:54 Date: 01/07/108 [ 26.655400] NET: Registered protocol family 16 [ 26.655523] EISA bus registered [ 26.655531] ACPI: bus type pci registered [ 26.679535] PCI: PCI BIOS revision 2.10 entry at 0xfae70, last bus=2 [ 26.679540] PCI: Using configuration type 1 [ 26.679543] Setting up standard PCI resources [ 26.681891] ACPI: EC: Look up EC in DSDT [ 26.686284] ACPI: Interpreter enabled [ 26.686292] ACPI: (supports S0 S1 S4 S5) [ 26.686317] ACPI: Using IOAPIC for interrupt routing [ 26.692686] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 26.692697] PCI: Probing PCI hardware (bus 00) [ 26.693203] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 26.693209] PCI quirk: region 1080-10bf claimed by ICH4 GPIO [ 26.693565] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 26.693643] PCI: Transparent bridge - 0000:00:1e.0 [ 26.693676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 26.693850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 26.700697] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 26.700825] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 26.700950] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 26.701075] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 26.701199] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 26.701324] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 26.701453] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 26.701580] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 26.701719] Linux Plug and Play Support v0.97 (c) Adam Belay [ 26.701736] pnp: PnP ACPI init [ 26.701754] ACPI: bus type pnp registered [ 26.704487] pnp: PnP ACPI: found 9 devices [ 26.704493] ACPI: ACPI bus type pnp unregistered [ 26.704500] PnPBIOS: Disabled by ACPI PNP [ 26.704590] PCI: Using ACPI for IRQ routing [ 26.704596] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 26.717616] NET: Registered protocol family 8 [ 26.717621] NET: Registered protocol family 20 [ 26.717726] pnp: 00:00: iomem range 0xcf800-0xcffff has been reserved [ 26.717732] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 26.717737] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 26.717742] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 26.719409] Time: tsc clocksource has been installed. [ 26.748178] PCI: Bridge: 0000:00:01.0 [ 26.748183] IO window: disabled. [ 26.748190] MEM window: f8000000-f9ffffff [ 26.748196] PREFETCH window: f0000000-f7ffffff [ 26.748202] PCI: Bridge: 0000:00:1e.0 [ 26.748207] IO window: a000-afff [ 26.748214] MEM window: fa000000-fa0fffff [ 26.748219] PREFETCH window: disabled. [ 26.748238] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 26.748252] NET: Registered protocol family 2 [ 26.787472] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 26.787582] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 26.788468] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 26.788804] TCP: Hash tables configured (established 131072 bind 65536) [ 26.788814] TCP reno registered [ 26.799602] checking if image is initramfs... it is [ 27.250675] Switched to high resolution mode on CPU 0 [ 27.250787] Switched to high resolution mode on CPU 1 [ 27.525390] Freeing initrd memory: 7859k freed [ 27.525818] audit: initializing netlink socket (disabled) [ 27.525833] audit(1202354094.212:1): initialized [ 27.525984] highmem bounce pool size: 64 pages [ 27.528927] VFS: Disk quotas dquot_6.5.1 [ 27.529005] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 27.529126] io scheduler noop registered [ 27.529130] io scheduler anticipatory registered [ 27.529134] io scheduler deadline registered [ 27.529154] io scheduler cfq registered (default) [ 27.529245] Boot video device is 0000:01:00.0 [ 27.529459] isapnp: Scanning for PnP cards... [ 27.882925] isapnp: No Plug & Play device found [ 27.915407] Real Time Clock Driver v1.12ac [ 27.915531] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 27.917054] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 27.917368] input: Macintosh mouse button emulation as /class/input/input0 [ 27.917477] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 27.917482] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 28.169651] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.169841] mice: PS/2 mouse device common for all mice [ 28.170009] EISA: Probing bus 0 at eisa.0 [ 28.170020] Cannot allocate resource for EISA slot 1 [ 28.170054] EISA: Detected 0 cards. [ 28.170157] TCP cubic registered [ 28.170172] NET: Registered protocol family 1 [ 28.170199] Using IPI No-Shortcut mode [ 28.170376] Magic number: 12:980:208 [ 28.170437] hash matches device ttyt6 [ 28.170552] hash matches device vcsa [ 28.170836] Freeing unused kernel memory: 364k freed [ 28.199014] input: AT Translated Set 2 keyboard as /class/input/input1 [ 28.435730] AppArmor: AppArmor initialized<5>audit(1202354095.212:2): type=1505 info="AppArmor initialized" pid=1165 [ 28.446379] fuse init (API version 7.8) [ 28.452808] Failure registering capabilities with primary security module. [ 28.474891] ACPI: Fan [FAN] (on) [ 28.483018] ACPI: Thermal Zone [THRM] (22 C) [ 28.499317] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 28.517451] md: linear personality registered for level -1 [ 28.522570] md: multipath personality registered for level -4 [ 28.527471] md: raid0 personality registered for level 0 [ 28.533104] md: raid1 personality registered for level 1 [ 28.537894] raid5: automatically using best checksumming function: pIII_sse [ 28.556701] pIII_sse : 3111.000 MB/sec [ 28.556706] raid5: using function: pIII_sse (3111.000 MB/sec) [ 28.624604] raid6: int32x1 714 MB/s [ 28.692517] raid6: int32x2 673 MB/s [ 28.760474] raid6: int32x4 655 MB/s [ 28.828322] raid6: int32x8 473 MB/s [ 28.896218] raid6: mmxx1 1962 MB/s [ 28.964108] raid6: mmxx2 2502 MB/s [ 29.032035] raid6: sse1x1 1166 MB/s [ 29.099908] raid6: sse1x2 2205 MB/s [ 29.167809] raid6: sse2x1 1968 MB/s [ 29.235700] raid6: sse2x2 2718 MB/s [ 29.235705] raid6: using algorithm sse2x2 (2718 MB/s) [ 29.235709] md: raid6 personality registered for level 6 [ 29.235713] md: raid5 personality registered for level 5 [ 29.235717] md: raid4 personality registered for level 4 [ 29.261613] md: raid10 personality registered for level 10 [ 30.020338] SCSI subsystem initialized [ 30.028481] libata version 2.21 loaded. [ 30.031066] ata_piix 0000:00:1f.2: version 2.11 [ 30.031074] ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ] [ 30.031107] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16 [ 30.031157] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 30.031246] scsi0 : ata_piix [ 30.031325] scsi1 : ata_piix [ 30.031513] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 [ 30.031526] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 [ 30.074891] usbcore: registered new interface driver usbfs [ 30.074936] usbcore: registered new interface driver hub [ 30.074979] usbcore: registered new device driver usb [ 30.076380] USB Universal Host Controller Interface driver v3.0 [ 30.178712] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 30.178726] e100: Copyright(c) 1999-2006 Intel Corporation [ 30.191395] Floppy drive(s): fd0 is 1.44M [ 30.194624] ata1.00: Host Protected Area detected: [ 30.194626] current size: 488395055 sectors [ 30.194627] native size: 488397168 sectors [ 30.194771] ata1.00: native size increased to 488397168 sectors [ 30.194776] ata1.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133 [ 30.194781] ata1.00: 488397168 sectors, multi 16: LBA48 [ 30.202593] ata1.00: configured for UDMA/133 [ 30.210039] FDC 0 is a post-1991 82077 [ 30.522033] ata2.00: ATAPI: OEM CD-ROM F563E, A.26, max UDMA/33 [ 30.685772] ata2.00: configured for UDMA/33 [ 30.685930] scsi 0:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5 [ 30.686557] scsi 1:0:0:0: CD-ROM OEM CD-ROM F563E A.26 PQ: 0 ANSI: 5 [ 30.689181] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 30.689206] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 30.689212] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 30.689445] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 30.689491] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000bc00 [ 30.689734] usb usb1: configuration #1 chosen from 1 choice [ 30.689789] hub 1-0:1.0: USB hub found [ 30.689805] hub 1-0:1.0: 2 ports detected [ 30.706623] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 30.706652] sd 0:0:0:0: [sda] Write Protect is off [ 30.706661] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.706698] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.706796] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 30.706822] sd 0:0:0:0: [sda] Write Protect is off [ 30.706829] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.707447] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.707469] sda: sda1 sda2 sda3 [ 30.734162] sd 0:0:0:0: [sda] Attached SCSI disk [ 30.740196] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 30.740239] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 30.753361] sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray [ 30.753372] Uniform CD-ROM driver Revision: 3.20 [ 30.753681] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 30.793628] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 30.793646] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 30.793651] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 30.793682] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 30.793713] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b000 [ 30.793832] usb usb2: configuration #1 chosen from 1 choice [ 30.793870] hub 2-0:1.0: USB hub found [ 30.793880] hub 2-0:1.0: 2 ports detected [ 30.897434] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16 [ 30.897461] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 30.897467] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 30.897525] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 30.897561] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000b400 [ 30.897740] usb usb3: configuration #1 chosen from 1 choice [ 30.897796] hub 3-0:1.0: USB hub found [ 30.897809] hub 3-0:1.0: 2 ports detected [ 31.001046] Attempting manual resume [ 31.001053] swsusp: Resume From Partition 8:2 [ 31.001055] PM: Checking swsusp image. [ 31.001255] PM: Resume from disk failed. [ 31.005317] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17 [ 31.005337] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 31.005342] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 31.005374] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 31.005400] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000b800 [ 31.005530] usb usb4: configuration #1 chosen from 1 choice [ 31.005567] hub 4-0:1.0: USB hub found [ 31.005578] hub 4-0:1.0: 2 ports detected [ 31.041267] kjournald starting. Commit interval 5 seconds [ 31.041285] EXT3-fs: mounted filesystem with ordered data mode. [ 31.109232] ACPI: PCI Interrupt 0000:02:08.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 [ 31.109253] GSI 20 (level, low) -> IRQ 19 [ 31.109257] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 31.109263] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 31.109307] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 31.109354] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 31.109367] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfa100000 [ 31.113264] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 31.113390] usb usb5: configuration #1 chosen from 1 choice [ 31.113433] hub 5-0:1.0: USB hub found [ 31.113446] hub 5-0:1.0: 8 ports detected [ 31.131704] e100: eth0: e100_probe: addr 0xfa000000, irq 19, MAC addr 00:20:ED:8D:A0:0E [ 31.748029] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 31.930036] usb 3-1: configuration #1 chosen from 1 choice [ 38.826504] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 38.835173] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 38.884511] Linux agpgart interface v0.102 (c) Dave Jones [ 39.008143] agpgart: Detected an Intel 865 Chipset. [ 39.013668] agpgart: AGP aperture is 128M @ 0xe8000000 [ 39.516619] input: PC Speaker as /class/input/input2 [ 39.841079] nvidia: module license 'NVIDIA' taints kernel. [ 40.094755] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 40.094952] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 40.134718] intel_rng: FWH not detected [ 40.177344] usbcore: registered new interface driver hiddev [ 40.192826] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3 [ 40.192908] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-1 [ 40.192938] usbcore: registered new interface driver usbhid [ 40.192948] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 40.216677] iTCO_vendor_support: vendor-support=0 [ 40.228713] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 40.229516] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060) [ 40.230249] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 40.764981] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21 [ 40.765017] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 41.086297] intel8x0_measure_ac97_clock: measured 54758 usecs [ 41.086306] intel8x0: clocking to 48000 [ 41.345766] lp: driver loaded but no devices found [ 41.403179] Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k [ 41.696106] EXT3 FS on sda1, internal journal [ 42.344031] kjournald starting. Commit interval 5 seconds [ 42.344306] EXT3 FS on sda3, internal journal [ 42.344313] EXT3-fs: mounted filesystem with ordered data mode. [ 44.070985] No dock devices found. [ 44.163296] input: Power Button (FF) as /class/input/input4 [ 44.163328] ACPI: Power Button (FF) [PWRF] [ 44.163397] input: Power Button (CM) as /class/input/input5 [ 44.163430] ACPI: Power Button (CM) [PWRB] [ 44.163492] input: Sleep Button (CM) as /class/input/input6 [ 44.163520] ACPI: Sleep Button (CM) [SLPB] [ 45.879956] NET: Registered protocol family 10 [ 45.880098] lo: Disabled Privacy Extensions [ 46.039126] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 46.179355] ppdev: user-space parallel port driver [ 46.378144] audit(1202354113.990:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4980 profile="/usr/sbin/cupsd" [ 46.453593] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 46.453602] apm: disabled - APM is not SMP safe. [ 47.741420] Failure registering capabilities with primary security module. [ 47.950754] Bluetooth: Core ver 2.11 [ 47.950965] NET: Registered protocol family 31 [ 47.950971] Bluetooth: HCI device and connection manager initialized [ 47.950976] Bluetooth: HCI socket layer initialized [ 47.972846] Bluetooth: L2CAP ver 2.8 [ 47.972853] Bluetooth: L2CAP socket layer initialized [ 48.054004] Bluetooth: RFCOMM socket layer initialized [ 48.054194] Bluetooth: RFCOMM TTY layer initialized [ 48.054200] Bluetooth: RFCOMM ver 1.8 [ 50.561784] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 50.561802] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 50.561837] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 53.070696] NET: Registered protocol family 17 [ 67.080367] eth0: no IPv6 routers present