This bug was fixed in the package linux-iot - 5.4.0-1014.16

---------------
linux-iot (5.4.0-1014.16) focal; urgency=medium

  * focal/linux-iot: 5.4.0-1014.16 -proposed tracker (LP: #2013364)

  * Add support for Pensando SoC (LP: #2013438)
    - mmc: sdhci-cadence: remove unneeded 'inline' marker
    - mmc: sdhci-cadence: fix PHY write
    - mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
    - spi: fix client driver breakages when using GPIO descriptors
    - mtd: spi-nor: macronix: Add support for mx66u2g45g
    - mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
    - SAUCE: mtd/spi-nor/cadence-quadspi.c: support spi-rx-bus-width property on
      subnodes.
    - SAUCE: hwmon/pmbus: Add a driver for the TI TPS53659, based on Vadim
      Pasternak's TPS53679.c driver.
    - SAUCE: drivers/hwmon: Adding support LTC3888
    - SAUCE: i2c-designware: Add I2C code that attempts to recover from a stuck
      SDA line.
    - SAUCE: arm64/traps: Call platform handler for bad_mode
    - SAUCE: mtd/spi-nor/cadence-quadspi.c: add quirks for the Pensando controller
    - SAUCE: drivers/mmc/host: Pensando Elba support in the Cadence EMMC host
      controller
    - SAUCE: spi-dw: Support Pensando Elba custom chip-select
    - SAUCE: drivers/spi/spidev.c: Add pensando,cpld device tree compat entry
    - SAUCE: arch/arm64: Initial support for the Pensando Elba SoC
    - SAUCE: dts/pensnado: Elba flash partitions
    - SAUCE: drivers/edac: Add Elba EDAC support
    - SAUCE: drivers/soc/pensando: /dev/capmem driver.
    - SAUCE: Interrupt domain controllers for Elba ASIC.
    - SAUCE: i2c: Add Lattice RD1173 I2C controller driver.
    - SAUCE: drivers/uio: UIO drivers for Elba
    - SAUCE: drivers/pensando/soc: Boot State Machine (BSM) integration.
    - SAUCE: drivers/soc/pensando: crash dump driver.
    - SAUCE: drivers/soc/pensando: Add the Reset Cause driver
    - SAUCE: soc/pensando: pcie driver
    - SAUCE: dts/pensando: add mnet and mcrypt devices, with reserved dma memory
    - [Config] add Pensando Elba support
    - [Config] CONFIG_ARM64_VA_BITS_39=y
    - SAUCE: Pensando DSC drivers 1.15.9-C-65
    - SAUCE: add Pensando DSC drivers build machinery
    - SAUCE: pensando-dsc-drivers: Kconfig: Make the configs available only for
      ARCH_PENSANDO
    - [Config] enable Pensando DSC drivers as modules
    - SAUCE: arm64: fix platform_serror handling.
    - SAUCE: i2c: Add MODULE_ALIAS to support udev
    - SAUCE: edac: elba: Add MODULE_DEVICE_TABLE
    - SAUCE: ubuntu/pensando: mdev: Add MODULE_DEVICE_TABLE
    - [Config] arm64: CONFIG_VFIO_MDEV=n
    - SAUCE: spi/spidev: Add MODULE_ALIAS
    - [Packaging] Do not blacklist dw_wdt.ko
    - SAUCE: arm64: dts: pensando: remove unneeded Makefile code
    - SAUCE: dsc-drivers: update drivers for 1.15.9-C-100 (#19)
    - SAUCE: pciesvc - initial version
    - SAUCE: dsc-drivers: update ionic drivers to 22.11.1-001 (#21)
    - SAUCE: drivers/soc/pensando: refactor pciep_regrd32 for kpcimgr
    - SAUCE: drivers/soc/pensando: kpcimgr driver.
    - SAUCE: drivers/reset: Add emmc hardware reset
    - SAUCE: drivers/soc/pensando sbus driver
    - SAUCE: drivers/soc/pensando: boot_count to sysfs for kdump.log
    - SAUCE: drivers/i2c: Reset Lattice RD1173 master for i2c_busy set.
    - SAUCE: drivers/mtd/spi-nor: Winbond w25q02nw flash support.
    - SAUCE: drivers/soc/pensando: penfw driver
    - SAUCE: defconfig: cleanup elba_defconfig
    - SAUCE: arch/arm64/boot/dts: psci support
    - SAUCE: reset: change RESET_ELBASR to bool
    - [Config] Enable 4 new pensando options
    - watchdog: make DesignWare watchdog allow users to set bigger timeout value
    - SAUCE: drivers/i2c: Fix Lattice RD1173 interrupt handling
    - SAUCE: drivers/hwmon: Fix LTC3888-1 support.
    - SAUCE: ubuntu/pensando: Update to 1.59.0-C-5 (#26)

  * INVALID or PRIVATE BUG (LP: #2002610) // Add support for Pensando SoC
    (LP: #2013438)
    - SAUCE: ubuntu/pensando: set is_mgmt_nic to fix ethtool oob_mnic0

 -- Wen-chien Jesse Sung <email address hidden>  Fri, 31 Mar 2023 18:33:16 +0800