[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-36-generic (buildd@lgw01-20) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #55~14.04.1-Ubuntu SMP Fri Aug 12 11:49:30 UTC 2016 (Ubuntu 4.4.0-36.55~14.04.1-generic 4.4.16) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-36-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ad44afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad44b000-0x00000000ad451fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ad452000-0x00000000ad8affff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad8b0000-0x00000000adcf3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000adcf4000-0x00000000ccae3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ccae4000-0x00000000cccf3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cccf4000-0x00000000ccd13fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ccd14000-0x00000000cd247fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cd248000-0x00000000cdffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUS All Series/H97M-PLUS, BIOS 0317 04/23/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x81fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DBFFF write-protect [ 0.000000] DC000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7800000000 write-back [ 0.000000] 1 base 0800000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 4 base 00CF000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 081FE00000 mask 7FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 32GB, type WB [ 0.000000] reg 1, base: 32GB, range: 512MB, type WB [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC [ 0.000000] reg 4, base: 3312MB, range: 16MB, type UC [ 0.000000] reg 5, base: 33278MB, range: 2MB, type UC [ 0.000000] total RAM covered: 32494M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 9 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3312MB, range: 16MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 8GB, type WB [ 0.000000] reg 6, base: 16GB, range: 16GB, type WB [ 0.000000] reg 7, base: 32GB, range: 512MB, type WB [ 0.000000] reg 8, base: 33278MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd860-0x000fd86f] mapped at [ffff8800000fd860] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02004000, 0x02004fff] PGTABLE [ 0.000000] BRK [0x02005000, 0x02005fff] PGTABLE [ 0.000000] BRK [0x02006000, 0x02006fff] PGTABLE [ 0.000000] BRK [0x02007000, 0x02007fff] PGTABLE [ 0.000000] BRK [0x02008000, 0x02008fff] PGTABLE [ 0.000000] BRK [0x02009000, 0x02009fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33f18000-0x35f83fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000CCCFA088 000084 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000CCD0BBD8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000CCCFA1A0 011A32 (v02 ALASKA A M I 00000006 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000CD247F80 000040 [ 0.000000] ACPI: APIC 0x00000000CCD0BCE8 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000CCD0BD80 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: TCPA 0x00000000CCD0BDC8 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000CCD0BE00 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCD0C9F0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000CCD0CF30 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117) [ 0.000000] ACPI: MCFG 0x00000000CCD0DAA8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000CCD0DAE8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000CCD0DB20 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCD0DE90 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: DMAR 0x00000000CCD13A48 0000B8 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x81fdf6000-0x81fdfafff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000081fdfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ad44afff] [ 0.000000] node 0: [mem 0x00000000ad452000-0x00000000ad8affff] [ 0.000000] node 0: [mem 0x00000000adcf4000-0x00000000ccae3fff] [ 0.000000] node 0: [mem 0x00000000cdfff000-0x00000000cdffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000081fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081fdfffff] [ 0.000000] On node 0 totalpages: 8307754 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3984 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13019 pages used for memmap [ 0.000000] DMA32 zone: 833178 pages, LIFO batch:31 [ 0.000000] Normal zone: 116728 pages used for memmap [ 0.000000] Normal zone: 7470592 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xcf200000-0xdf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xad44b000-0xad451fff] [ 0.000000] PM: Registered nosave memory: [mem 0xad8b0000-0xadcf3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xccae4000-0xcccf3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcccf4000-0xccd13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xccd14000-0xcd247fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcd248000-0xcdffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88081fa00000 s98008 r8192 d28968 u262144 [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8177922 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-36-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 32593708K/33231016K available (8176K kernel code, 1292K rwdata, 3960K rodata, 1484K init, 1292K bss, 637308K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3600.244 MHz processor [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.48 BogoMIPS (lpj=14400976) [ 0.000021] pid_max: default: 32768 minimum: 301 [ 0.000025] ACPI: Core revision 20150930 [ 0.010160] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.010173] Security Framework initialized [ 0.010175] Yama: becoming mindful. [ 0.010185] AppArmor: AppArmor initialized [ 0.011446] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.015465] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.017178] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.017200] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.017420] Initializing cgroup subsys io [ 0.017422] Initializing cgroup subsys memory [ 0.017426] Initializing cgroup subsys devices [ 0.017427] Initializing cgroup subsys freezer [ 0.017429] Initializing cgroup subsys net_cls [ 0.017430] Initializing cgroup subsys perf_event [ 0.017431] Initializing cgroup subsys net_prio [ 0.017433] Initializing cgroup subsys hugetlb [ 0.017434] Initializing cgroup subsys pids [ 0.017451] CPU: Physical Processor ID: 0 [ 0.017451] CPU: Processor Core ID: 0 [ 0.017454] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.017454] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.018139] mce: CPU supports 9 MCE banks [ 0.018149] CPU0: Thermal monitoring enabled (TM1) [ 0.018155] process: using mwait in idle threads [ 0.018158] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.018158] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.018386] Freeing SMP alternatives memory: 28K (ffffffff81eb8000 - ffffffff81ebf000) [ 0.032081] ftrace: allocating 32030 entries in 126 pages [ 0.040896] smpboot: Max logical packages: 2 [ 0.040898] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.040902] DMAR: Host address width 39 [ 0.040902] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.040909] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.040909] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.040912] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.040913] DMAR: RMRR base: 0x000000ccc82000 end: 0x000000ccc8efff [ 0.040913] DMAR: RMRR base: 0x000000cf000000 end: 0x000000df1fffff [ 0.040915] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.040916] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.040916] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.040917] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.041167] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.041168] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.041547] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081232] TSC deadline timer enabled [ 0.081234] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.081246] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.081259] ... version: 3 [ 0.081259] ... bit width: 48 [ 0.081260] ... generic registers: 4 [ 0.081260] ... value mask: 0000ffffffffffff [ 0.081261] ... max period: 0000ffffffffffff [ 0.081261] ... fixed-purpose events: 3 [ 0.081262] ... event mask: 000000070000000f [ 0.081833] x86: Booting SMP configuration: [ 0.081834] .... node #0, CPUs: #1 [ 0.085093] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.085144] #2 #3 #4 #5 #6 #7 [ 0.104403] x86: Booted up 1 node, 8 CPUs [ 0.104406] smpboot: Total of 8 processors activated (57603.90 BogoMIPS) [ 0.112163] devtmpfs: initialized [ 0.115059] evm: security.selinux [ 0.115060] evm: security.SMACK64 [ 0.115060] evm: security.SMACK64EXEC [ 0.115061] evm: security.SMACK64TRANSMUTE [ 0.115061] evm: security.SMACK64MMAP [ 0.115062] evm: security.ima [ 0.115063] evm: security.capability [ 0.115101] PM: Registering ACPI NVS region [mem 0xad44b000-0xad451fff] (28672 bytes) [ 0.115102] PM: Registering ACPI NVS region [mem 0xccd14000-0xcd247fff] (5455872 bytes) [ 0.115196] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.115258] pinctrl core: initialized pinctrl subsystem [ 0.115337] RTC time: 16:14:20, date: 09/10/16 [ 0.115857] NET: Registered protocol family 16 [ 0.124030] cpuidle: using governor ladder [ 0.136029] cpuidle: using governor menu [ 0.136031] PCCT header not found. [ 0.136083] ACPI: bus type PCI registered [ 0.136084] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.136131] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.136133] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.136139] PCI: Using configuration type 1 for base access [ 0.136162] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.152253] ACPI: Added _OSI(Module Device) [ 0.152254] ACPI: Added _OSI(Processor Device) [ 0.152255] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152256] ACPI: Added _OSI(Processor Aggregator Device) [ 0.155398] ACPI: Executed 13 blocks of module-level executable AML code [ 0.157834] ACPI: Dynamic OEM Table Load: [ 0.157838] ACPI: SSDT 0xFFFF8807FBED9800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.159318] ACPI: Interpreter enabled [ 0.159323] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.159327] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.159339] ACPI: (supports S0 S3 S4 S5) [ 0.159340] ACPI: Using IOAPIC for interrupt routing [ 0.159356] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.159622] ACPI: Power Resource [PG00] (on) [ 0.159865] ACPI: Power Resource [PG01] (on) [ 0.160083] ACPI: Power Resource [PG02] (on) [ 0.166501] ACPI: Power Resource [FN00] (off) [ 0.166544] ACPI: Power Resource [FN01] (off) [ 0.166585] ACPI: Power Resource [FN02] (off) [ 0.166627] ACPI: Power Resource [FN03] (off) [ 0.166668] ACPI: Power Resource [FN04] (off) [ 0.167207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.167210] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.167534] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.167790] PCI host bridge to bus 0000:00 [ 0.167792] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.167793] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.167794] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.167795] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.167796] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.167796] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.167797] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.167799] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.167803] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.167860] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.167883] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.167937] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.167961] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.167970] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.167974] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.167977] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.168026] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.168034] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit] [ 0.168108] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330 [ 0.168128] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit] [ 0.168169] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.168204] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.168226] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000 [ 0.168248] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3e000-0xf7d3e00f 64bit] [ 0.168292] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.168352] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000 [ 0.168371] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff] [ 0.168377] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3c000-0xf7d3cfff] [ 0.168383] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.168422] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.168454] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.168476] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320 [ 0.168499] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff] [ 0.168560] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.168592] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.168615] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300 [ 0.168636] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit] [ 0.168683] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.168715] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.168737] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400 [ 0.168788] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.168834] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.168857] pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400 [ 0.168908] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.168953] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.168978] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320 [ 0.169001] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3a000-0xf7d3a3ff] [ 0.169061] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.169094] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.169117] pci 0000:00:1f.0: [8086:8cc6] type 00 class 0x060100 [ 0.169244] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 0.169261] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.169266] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.169272] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.169277] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.169282] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.169288] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d39000-0xf7d397ff] [ 0.169309] pci 0000:00:1f.2: PME# supported from D3hot [ 0.169351] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500 [ 0.169364] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d38000-0xf7d380ff 64bit] [ 0.169380] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.169451] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.169492] acpiphp: Slot [1] registered [ 0.169495] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.169550] pci 0000:03:00.0: [1186:4b00] type 00 class 0x020000 [ 0.169590] pci 0000:03:00.0: reg 0x10: [mem 0xf7c20000-0xf7c23fff 64bit] [ 0.169600] pci 0000:03:00.0: reg 0x18: [io 0xe000-0xe0ff] [ 0.169639] pci 0000:03:00.0: reg 0x30: [mem 0xf7c00000-0xf7c1ffff pref] [ 0.169680] pci 0000:03:00.0: supports D1 D2 [ 0.169681] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.169713] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.169731] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.169738] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.169740] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.169742] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.170334] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.170363] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.170392] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.170420] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.170448] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.170476] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.170504] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.170531] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.170697] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.170761] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.170762] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.170763] vgaarb: loaded [ 0.170764] vgaarb: bridge control possible 0000:00:02.0 [ 0.170887] SCSI subsystem initialized [ 0.170909] libata version 3.00 loaded. [ 0.170921] ACPI: bus type USB registered [ 0.170930] usbcore: registered new interface driver usbfs [ 0.170934] usbcore: registered new interface driver hub [ 0.170948] usbcore: registered new device driver usb [ 0.171028] PCI: Using ACPI for IRQ routing [ 0.172225] PCI: pci_cache_line_size set to 64 bytes [ 0.172259] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff] [ 0.172260] e820: reserve RAM buffer [mem 0xad44b000-0xafffffff] [ 0.172261] e820: reserve RAM buffer [mem 0xad8b0000-0xafffffff] [ 0.172261] e820: reserve RAM buffer [mem 0xccae4000-0xcfffffff] [ 0.172262] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff] [ 0.172263] e820: reserve RAM buffer [mem 0x81fe00000-0x81fffffff] [ 0.172328] NetLabel: Initializing [ 0.172329] NetLabel: domain hash size = 128 [ 0.172329] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.172336] NetLabel: unlabeled traffic allowed by default [ 0.172374] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.172377] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.174383] amd_nb: Cannot enumerate AMD northbridges [ 0.174393] clocksource: Switched to clocksource hpet [ 0.178108] AppArmor: AppArmor Filesystem Enabled [ 0.178144] pnp: PnP ACPI init [ 0.178240] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.178243] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.178256] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.178278] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.178279] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.178333] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.178334] system 00:03: [io 0x02a0-0x02af] has been reserved [ 0.178335] system 00:03: [io 0x0a00-0x0aff] has been reserved [ 0.178336] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.178516] pnp 00:04: [dma 0 disabled] [ 0.178577] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.178606] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.178608] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.178735] pnp 00:06: [dma 0 disabled] [ 0.178760] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.178791] pnp 00:07: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.179053] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.179055] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.179056] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.179057] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.179058] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.179059] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.179060] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.179061] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.179062] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.179063] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.179064] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.179065] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.179163] pnp: PnP ACPI: found 9 devices [ 0.184712] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.184730] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.184734] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.184742] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.184743] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.184747] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.184753] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.184754] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.184755] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.184755] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window] [ 0.184756] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff window] [ 0.184757] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff window] [ 0.184758] pci_bus 0000:00: resource 10 [mem 0xdf200000-0xfeafffff window] [ 0.184759] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.184760] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.184781] NET: Registered protocol family 2 [ 0.184923] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.185136] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.185230] TCP: Hash tables configured (established 262144 bind 65536) [ 0.185256] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.185318] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.185395] NET: Registered protocol family 1 [ 0.185406] pci 0000:00:02.0: Video device with shadowed ROM [ 0.218439] PCI: CLS 64 bytes, default 64 [ 0.218472] Trying to unpack rootfs image as initramfs... [ 0.534997] Freeing initrd memory: 33200K (ffff880033f18000 - ffff880035f84000) [ 0.535030] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.535032] software IO TLB [mem 0xc8ae4000-0xccae4000] (64MB) mapped at [ffff8800c8ae4000-ffff8800ccae3fff] [ 0.535090] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.535091] hw unit of domain pp0-core 2^-14 Joules [ 0.535091] hw unit of domain package 2^-14 Joules [ 0.535092] hw unit of domain dram 2^-14 Joules [ 0.535092] hw unit of domain pp1-gpu 2^-14 Joules [ 0.535231] Scanning for low memory corruption every 60 seconds [ 0.535464] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.535492] audit: initializing netlink subsys (disabled) [ 0.535502] audit: type=2000 audit(1473524060.520:1): initialized [ 0.535790] Initialise system trusted keyring [ 0.535876] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.535877] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.536741] zbud: loaded [ 0.536867] VFS: Disk quotas dquot_6.6.0 [ 0.536888] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.537048] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.537196] fuse init (API version 7.23) [ 0.537279] Key type big_key registered [ 0.537289] Allocating IMA MOK and blacklist keyrings. [ 0.537535] Key type asymmetric registered [ 0.537537] Asymmetric key parser 'x509' registered [ 0.537558] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.537586] io scheduler noop registered [ 0.537588] io scheduler deadline registered (default) [ 0.537606] io scheduler cfq registered [ 0.537956] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.537958] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 0.537969] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.537972] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.537984] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.537986] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.537988] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.537992] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.537996] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.538016] vesafb: mode is 1600x900x32, linelength=6400, pages=0 [ 0.538016] vesafb: scrolling: redraw [ 0.538018] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.538026] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90003800000, using 5632k, total 5632k [ 0.538080] Console: switching to colour frame buffer device 200x56 [ 0.538090] fb0: VESA VGA frame buffer device [ 0.538100] intel_idle: MWAIT substates: 0x42120 [ 0.538101] intel_idle: v0.4.1 model 0x3C [ 0.538101] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.538332] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.538335] ACPI: Power Button [PWRB] [ 0.538357] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.538358] ACPI: Power Button [PWRF] [ 0.538869] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.538870] ACPI: Thermal Zone [TZ00] (28 C) [ 0.539004] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.539005] ACPI: Thermal Zone [TZ01] (30 C) [ 0.539036] GHES: HEST is not enabled! [ 0.539094] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.559458] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.560392] Linux agpgart interface v0.103 [ 0.618399] tpm_tis 00:07: 1.2 TPM (device-id 0xB, rev-id 16) [ 0.860594] brd: module loaded [ 0.861507] loop: module loaded [ 0.861632] libphy: Fixed MDIO Bus: probed [ 0.861635] tun: Universal TUN/TAP device driver, 1.6 [ 0.861635] tun: (C) 1999-2004 Max Krasnyansky [ 0.861658] PPP generic driver version 2.4.2 [ 0.861692] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.861695] ehci-pci: EHCI PCI platform driver [ 0.861756] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.861759] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.861768] ehci-pci 0000:00:1a.0: debug port 2 [ 0.865671] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.865680] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3b000 [ 0.874354] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.874383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.874384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.874385] usb usb1: Product: EHCI Host Controller [ 0.874386] usb usb1: Manufacturer: Linux 4.4.0-36-generic ehci_hcd [ 0.874387] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.874463] hub 1-0:1.0: USB hub found [ 0.874465] hub 1-0:1.0: 2 ports detected [ 0.874602] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.874605] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.874613] ehci-pci 0000:00:1d.0: debug port 2 [ 0.878517] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.878524] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d3a000 [ 0.890366] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.890382] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.890383] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.890383] usb usb2: Product: EHCI Host Controller [ 0.890384] usb usb2: Manufacturer: Linux 4.4.0-36-generic ehci_hcd [ 0.890385] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.890444] hub 2-0:1.0: USB hub found [ 0.890446] hub 2-0:1.0: 2 ports detected [ 0.890512] ehci-platform: EHCI generic platform driver [ 0.890519] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.890522] ohci-pci: OHCI PCI platform driver [ 0.890528] ohci-platform: OHCI generic platform driver [ 0.890533] uhci_hcd: USB Universal Host Controller Interface driver [ 0.890603] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.890606] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.891669] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.891673] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.891716] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.891717] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.891718] usb usb3: Product: xHCI Host Controller [ 0.891719] usb usb3: Manufacturer: Linux 4.4.0-36-generic xhci-hcd [ 0.891719] usb usb3: SerialNumber: 0000:00:14.0 [ 0.891777] hub 3-0:1.0: USB hub found [ 0.891791] hub 3-0:1.0: 14 ports detected [ 0.892819] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.892820] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.892841] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.892842] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.892843] usb usb4: Product: xHCI Host Controller [ 0.892844] usb usb4: Manufacturer: Linux 4.4.0-36-generic xhci-hcd [ 0.892845] usb usb4: SerialNumber: 0000:00:14.0 [ 0.892900] hub 4-0:1.0: USB hub found [ 0.892909] hub 4-0:1.0: 6 ports detected [ 0.893399] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.895815] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.895817] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.895890] mousedev: PS/2 mouse device common for all mice [ 0.895968] rtc_cmos 00:01: RTC can wake from S4 [ 0.896067] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.896088] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.896093] i2c /dev entries driver [ 0.896121] device-mapper: uevent: version 1.0.3 [ 0.896161] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.896175] Intel P-state driver initializing. [ 0.896352] ledtrig-cpu: registered to indicate activity on CPUs [ 0.897080] NET: Registered protocol family 10 [ 0.897489] NET: Registered protocol family 17 [ 0.897520] Key type dns_resolver registered [ 0.898188] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x7 [ 0.898228] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x7 [ 0.898241] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x7 [ 0.898265] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x7 [ 0.898304] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x7 [ 0.898346] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x7 [ 0.898369] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x7 [ 0.898409] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x7 [ 0.898486] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.898979] registered taskstats version 1 [ 0.899018] Loading compiled-in X.509 certificates [ 0.901188] Loaded X.509 cert 'Build time autogenerated kernel key: 6d1a628313c57c2b040732ed4f3ff204c35686cf' [ 0.901248] zswap: loaded using pool lzo/zbud [ 0.903226] Key type trusted registered [ 0.905108] Key type encrypted registered [ 0.905112] AppArmor: AppArmor sha1 policy hashing enabled [ 1.186348] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.202346] usb 3-10: new high-speed USB device number 2 using xhci_hcd [ 1.202351] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.318712] usb 1-1: New USB device found, idVendor=8087, idProduct=8009 [ 1.318714] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.318853] hub 1-1:1.0: USB hub found [ 1.318961] hub 1-1:1.0: 6 ports detected [ 1.330453] usb 3-10: New USB device found, idVendor=0409, idProduct=0050 [ 1.330455] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.330741] hub 3-10:1.0: USB hub found [ 1.330780] hub 3-10:1.0: 7 ports detected [ 1.334710] usb 2-1: New USB device found, idVendor=8087, idProduct=8001 [ 1.334712] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.334852] hub 2-1:1.0: USB hub found [ 1.334959] hub 2-1:1.0: 8 ports detected [ 1.518398] evm: HMAC attrs: 0x1 [ 1.518724] Magic number: 0:634:236 [ 1.518751] acpi-fan PNP0C0B:01: hash matches [ 1.518755] acpi PNP0C0B:01: hash matches [ 1.518798] memory memory114: hash matches [ 1.518862] rtc_cmos 00:01: setting system clock to 2016-09-10 16:14:21 UTC (1473524061) [ 1.518929] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.518930] EDD information not available. [ 1.518978] PM: Hibernation image not present or could not be loaded. [ 1.519552] Freeing unused kernel memory: 1484K (ffffffff81d45000 - ffffffff81eb8000) [ 1.519553] Write protecting the kernel read-only data: 12288k [ 1.519711] Freeing unused kernel memory: 4K (ffff8800017ff000 - ffff880001800000) [ 1.519935] Freeing unused kernel memory: 136K (ffff880001bde000 - ffff880001c00000) [ 1.526875] systemd-udevd[163]: starting version 204 [ 1.533925] sdhci: Secure Digital Host Controller Interface driver [ 1.533927] sdhci: Copyright(c) Pierre Ossman [ 1.534322] tsc: Refined TSC clocksource calibration: 3599.996 MHz [ 1.534325] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e44fb235b, max_idle_ns: 440795341910 ns [ 1.534843] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.535729] wmi: Mapper loaded [ 1.539570] pps_core: LinuxPPS API ver. 1 registered [ 1.539571] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.540340] PTP clock support registered [ 1.540622] sky2: driver version 1.30 [ 1.540711] sky2 0000:03:00.0: Yukon-2 EC chip revision 2 [ 1.541044] sky2 0000:03:00.0 eth0: addr 00:21:91:19:74:54 [ 1.541860] ahci 0000:00:1f.2: version 3.0 [ 1.541982] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode [ 1.541984] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 1.542390] [drm] Initialized drm 1.1.0 20060810 [ 1.543216] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.543217] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.547115] scsi host0: ahci [ 1.547209] scsi host1: ahci [ 1.547343] scsi host2: ahci [ 1.547412] scsi host3: ahci [ 1.547499] scsi host4: ahci [ 1.547555] scsi host5: ahci [ 1.547597] ata1: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39100 irq 31 [ 1.547599] ata2: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39180 irq 31 [ 1.547600] ata3: DUMMY [ 1.547601] ata4: DUMMY [ 1.547601] ata5: DUMMY [ 1.547602] ata6: DUMMY [ 1.547734] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.618318] usb 3-10.1: new low-speed USB device number 3 using xhci_hcd [ 1.717036] e1000e 0000:00:19.0 eth1: registered PHC clock [ 1.717038] e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) 10:c3:7b:4c:77:01 [ 1.717039] e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.717064] e1000e 0000:00:19.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.717500] [drm] Memory usable by graphics device = 2048M [ 1.717502] checking generic (e0000000 580000) vs hw (e0000000 10000000) [ 1.717503] fb: switching to inteldrmfb from VESA VGA [ 1.717520] Console: switching to colour dummy device 80x25 [ 1.717558] [drm] Replacing VGA console driver [ 1.723697] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.723698] [drm] Driver supports precise vblank timestamp query. [ 1.723996] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.726195] usb 3-10.1: New USB device found, idVendor=046d, idProduct=c077 [ 1.726197] usb 3-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.726198] usb 3-10.1: Product: USB Optical Mouse [ 1.726199] usb 3-10.1: Manufacturer: Logitech [ 1.726256] usb 3-10.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.803102] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.803396] acpi device:16: registered as cooling_device13 [ 1.803437] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.803480] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 1.818314] usb 3-10.2: new low-speed USB device number 4 using xhci_hcd [ 1.837789] fbcon: inteldrmfb (fb0) is primary device [ 1.837827] Console: switching to colour frame buffer device 200x56 [ 1.837839] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.866309] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.866324] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.866540] ata1.00: supports DRM functions and may not be fully accessible [ 1.866596] ata1.00: READ LOG DMA EXT failed, trying unqueued [ 1.866625] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.866627] ata1.00: ATA-9: Samsung SSD 840 EVO 1TB, EXT0BB6Q, max UDMA/133 [ 1.866628] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.866636] ata2.00: READ LOG DMA EXT failed, trying unqueued [ 1.866659] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.866660] ata2.00: ATA-9: SAMSUNG MZ7WD120HAFV-00003, DXM87W3Q, max UDMA/133 [ 1.866661] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.866795] ata1.00: supports DRM functions and may not be fully accessible [ 1.866830] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.866832] ata1.00: configured for UDMA/133 [ 1.866953] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5 [ 1.866992] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.867034] ata2.00: configured for UDMA/133 [ 1.867127] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.867137] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.867143] sd 0:0:0:0: [sda] Write Protect is off [ 1.867144] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.867149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.867277] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZ7WD120 7W3Q PQ: 0 ANSI: 5 [ 1.867405] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.867417] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.867508] sd 1:0:0:0: [sdb] Write Protect is off [ 1.867510] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.867528] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.868093] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.868574] sda: sda1 sda2 < sda5 > [ 1.868713] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.874667] random: lvm urandom read with 13 bits of entropy available [ 1.927573] usb 3-10.2: New USB device found, idVendor=046d, idProduct=c31d [ 1.927575] usb 3-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.927576] usb 3-10.2: Product: USB Keyboard [ 1.927577] usb 3-10.2: Manufacturer: Logitech [ 1.927658] usb 3-10.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.927661] usb 3-10.2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes [ 2.018293] usb 3-10.4: new high-speed USB device number 5 using xhci_hcd [ 2.128493] usb 3-10.4: New USB device found, idVendor=04b8, idProduct=011b [ 2.128495] usb 3-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.128496] usb 3-10.4: Product: EPSON Scanner [ 2.128497] usb 3-10.4: Manufacturer: EPSON [ 2.131193] hidraw: raw HID events driver (C) Jiri Kosina [ 2.140737] usbcore: registered new interface driver usbhid [ 2.140738] usbhid: USB HID core driver [ 2.141689] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.0/0003:046D:C077.0001/input/input6 [ 2.141757] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-10.1/input0 [ 2.141829] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.2/3-10.2:1.0/0003:046D:C31D.0002/input/input7 [ 2.194374] hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-10.2/input0 [ 2.195770] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.2/3-10.2:1.1/0003:046D:C31D.0003/input/input8 [ 2.250387] hid-generic 0003:046D:C31D.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-10.2/input1 [ 2.534341] clocksource: Switched to clocksource tsc [ 2.706234] raid6: sse2x1 gen() 12739 MB/s [ 2.774229] raid6: sse2x1 xor() 9945 MB/s [ 2.842228] raid6: sse2x2 gen() 16023 MB/s [ 2.910220] raid6: sse2x2 xor() 10840 MB/s [ 2.978213] raid6: sse2x4 gen() 18550 MB/s [ 3.046210] raid6: sse2x4 xor() 13048 MB/s [ 3.114205] raid6: avx2x1 gen() 24776 MB/s [ 3.182201] raid6: avx2x2 gen() 28491 MB/s [ 3.250195] raid6: avx2x4 gen() 33114 MB/s [ 3.250196] raid6: using algorithm avx2x4 gen() 33114 MB/s [ 3.250196] raid6: using avx2x2 recovery algorithm [ 3.250842] xor: automatically using best checksumming function: [ 3.290191] avx : 39801.000 MB/sec [ 3.297159] Btrfs loaded [ 3.352240] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 3.780382] Adding 33230844k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:33230844k SSFS [ 3.900643] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,discard [ 3.904520] systemd-udevd[506]: starting version 204 [ 4.015640] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 4.023332] EXT4-fs (sda1): mounted filesystem without journal. Opts: discard [ 4.023786] lp: driver loaded but no devices found [ 4.028137] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard [ 4.029419] ppdev: user-space parallel port driver [ 4.033548] parport_pc 00:04: reported by Plug and Play ACPI [ 4.033604] parport0: PC-style at 0x378, irq 5 [PCSPP] [ 4.114825] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.117387] e1000e 0000:00:19.0 rename3: renamed from eth1 [ 4.131088] lp0: using parport0 (interrupt-driven). [ 4.134198] systemd-udevd[593]: renamed network interface eth1 to rename3 [ 4.214847] sky2 0000:03:00.0 eth1: renamed from eth0 [ 4.238227] e1000e 0000:00:19.0 eth0: renamed from rename3 [ 4.238232] systemd-udevd[602]: renamed network interface eth0 to eth1 [ 4.255468] WARNING! power/level is deprecated; use power/control instead [ 4.258195] systemd-udevd[593]: renamed network interface rename3 to eth0 [ 4.341797] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.387251] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 4.387254] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.387255] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.387255] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 4.387256] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 4.387257] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 4.387258] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 4.387259] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 4.387260] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 4.400166] AVX2 version of gcm_enc/dec engaged. [ 4.400169] AES CTR mode by8 optimization enabled [ 4.402489] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 4.402522] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 4.402555] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 4.402596] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 4.402629] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 4.402658] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 4.402690] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 4.402719] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 4.412199] asus_wmi: ASUS WMI generic driver loaded [ 4.420568] asus_wmi: Initialization: 0x0 [ 4.420579] asus_wmi: BIOS WMI version: 0.9 [ 4.420597] asus_wmi: SFUN value: 0x0 [ 4.420755] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input17 [ 4.420801] asus_wmi: Number of fans: 1 [ 4.463569] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 4.706032] intel_rapl: Found RAPL domain package [ 4.706035] intel_rapl: Found RAPL domain core [ 4.706036] intel_rapl: Found RAPL domain uncore [ 4.706038] intel_rapl: Found RAPL domain dram [ 4.899589] random: nonblocking pool is initialized [ 4.923614] audit: type=1400 audit(1473524064.902:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=778 comm="apparmor_parser" [ 4.923724] audit: type=1400 audit(1473524064.902:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=778 comm="apparmor_parser" [ 4.923824] audit: type=1400 audit(1473524064.902:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=778 comm="apparmor_parser" [ 4.926957] audit: type=1400 audit(1473524064.906:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=780 comm="apparmor_parser" [ 4.927126] audit: type=1400 audit(1473524064.906:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=780 comm="apparmor_parser" [ 4.927232] audit: type=1400 audit(1473524064.906:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=780 comm="apparmor_parser" [ 4.932022] audit: type=1400 audit(1473524064.910:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=779 comm="apparmor_parser" [ 4.932178] audit: type=1400 audit(1473524064.910:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=779 comm="apparmor_parser" [ 4.932275] audit: type=1400 audit(1473524064.910:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=779 comm="apparmor_parser" [ 4.972658] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 5.210937] FS-Cache: Loaded [ 5.284568] RPC: Registered named UNIX socket transport module. [ 5.284569] RPC: Registered udp transport module. [ 5.284570] RPC: Registered tcp transport module. [ 5.284570] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.348181] FS-Cache: Netfs 'nfs' registered for caching [ 5.470108] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 5.839139] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 5.847247] device eth0 entered promiscuous mode [ 5.958460] init: avahi-cups-reload main process (1173) terminated with status 1 [ 5.984789] Bluetooth: Core ver 2.21 [ 5.984797] NET: Registered protocol family 31 [ 5.984798] Bluetooth: HCI device and connection manager initialized [ 5.984800] Bluetooth: HCI socket layer initialized [ 5.984802] Bluetooth: L2CAP socket layer initialized [ 5.984805] Bluetooth: SCO socket layer initialized [ 5.991398] Bluetooth: RFCOMM TTY layer initialized [ 5.991402] Bluetooth: RFCOMM socket layer initialized [ 5.991405] Bluetooth: RFCOMM ver 1.11 [ 6.006593] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.006595] Bluetooth: BNEP filters: protocol multicast [ 6.006597] Bluetooth: BNEP socket layer initialized [ 6.055661] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 6.130698] audit: type=1400 audit(1473524066.110:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1165 comm="apparmor_parser" [ 6.130986] audit: type=1400 audit(1473524066.110:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1165 comm="apparmor_parser" [ 6.278778] init: samba-ad-dc main process (1198) terminated with status 1 [ 6.716986] audit: type=1400 audit(1473524066.694:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1512 comm="apparmor_parser" [ 9.103567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 9.103599] br0: port 1(eth0) entered forwarding state [ 9.103606] br0: port 1(eth0) entered forwarding state [ 9.103637] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 17.951367] init: failsafe main process (981) killed by TERM signal [ 18.078439] audit: type=1400 audit(1473524078.058:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1998 comm="apparmor_parser" [ 18.078444] audit: type=1400 audit(1473524078.058:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1998 comm="apparmor_parser" [ 18.078446] audit: type=1400 audit(1473524078.058:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1998 comm="apparmor_parser" [ 18.078641] audit: type=1400 audit(1473524078.058:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1998 comm="apparmor_parser" [ 18.078643] audit: type=1400 audit(1473524078.058:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1998 comm="apparmor_parser" [ 18.078745] audit: type=1400 audit(1473524078.058:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1998 comm="apparmor_parser" [ 18.087685] audit: type=1400 audit(1473524078.066:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=2001 comm="apparmor_parser" [ 18.121176] audit: type=1400 audit(1473524078.102:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=2004 comm="apparmor_parser" [ 18.145523] aufs 4.x-rcN-20160111 [ 18.146402] audit: type=1400 audit(1473524078.126:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=2020 comm="apparmor_parser" [ 18.159406] audit: type=1400 audit(1473524078.138:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2024 comm="apparmor_parser" [ 18.198326] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 18.207423] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 18.226682] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.904433] init: Failed to spawn strongswan pre-start process: unable to execute: No such file or directory [ 19.920805] init: Failed to spawn strongswan post-stop process: unable to execute: No such file or directory [ 19.956417] init: alsa-restore main process (2432) terminated with status 99 [ 20.740096] Ebtables v2.0 registered [ 20.857713] ipmi message handler version 39.2 [ 20.859258] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 20.878568] IPMI System Interface driver. [ 20.878589] ipmi_si: Adding default-specified kcs state machine [ 20.878591] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 20.878595] ipmi_si: Interface detection failed [ 20.892990] ipmi_si: Adding default-specified smic state machine [ 20.892993] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 20.892995] ipmi_si: Interface detection failed [ 20.916987] ipmi_si: Adding default-specified bt state machine [ 20.916989] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 20.916992] ipmi_si: Interface detection failed [ 20.937001] ipmi_si: Unable to find any System Interface(s) [ 22.198192] init: plymouth-upstart-bridge main process ended, respawning [ 22.201594] init: plymouth-upstart-bridge main process (2947) terminated with status 1 [ 22.201600] init: plymouth-upstart-bridge main process ended, respawning [ 24.188857] device virbr1-nic entered promiscuous mode [ 24.279868] virbr1: port 1(virbr1-nic) entered listening state [ 24.279878] virbr1: port 1(virbr1-nic) entered listening state [ 24.302852] virbr1: port 1(virbr1-nic) entered disabled state [ 24.392810] device virbr2-nic entered promiscuous mode [ 24.494947] virbr2: port 1(virbr2-nic) entered listening state [ 24.494958] virbr2: port 1(virbr2-nic) entered listening state [ 24.518904] virbr2: port 1(virbr2-nic) entered disabled state [ 24.644799] device virbr4-nic entered promiscuous mode [ 24.712760] virbr4: port 1(virbr4-nic) entered listening state [ 24.712770] virbr4: port 1(virbr4-nic) entered listening state [ 24.735072] virbr4: port 1(virbr4-nic) entered disabled state [ 24.836793] device virbr3-nic entered promiscuous mode [ 24.916128] virbr3: port 1(virbr3-nic) entered listening state [ 24.916139] virbr3: port 1(virbr3-nic) entered listening state [ 24.935057] virbr3: port 1(virbr3-nic) entered disabled state [ 3397.579524] systemd-hostnamed[8231]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 3834.033469] systemd-hostnamed[9298]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 4955.593063] usb 3-10.6: new full-speed USB device number 6 using xhci_hcd [ 4955.699726] usb 3-10.6: New USB device found, idVendor=2341, idProduct=0043 [ 4955.699732] usb 3-10.6: New USB device strings: Mfr=1, Product=2, SerialNumber=220 [ 4955.699736] usb 3-10.6: Manufacturer: Arduino (www.arduino.cc) [ 4955.699739] usb 3-10.6: SerialNumber: 854383339353518001F1 [ 4955.699976] usb 3-10.6: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes [ 4955.711122] cdc_acm 3-10.6:1.0: ttyACM0: USB ACM device [ 4955.711391] usbcore: registered new interface driver cdc_acm [ 4955.711395] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [102574.874143] usb 3-10.6: USB disconnect, device number 6 [102574.876234] cdc_acm 3-10.6:1.0: failed to set dtr/rts [141055.504154] perf interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [169824.545782] usb 3-10.6: new full-speed USB device number 7 using xhci_hcd [169824.652278] usb 3-10.6: New USB device found, idVendor=2341, idProduct=0043 [169824.652284] usb 3-10.6: New USB device strings: Mfr=1, Product=2, SerialNumber=220 [169824.652287] usb 3-10.6: Manufacturer: Arduino (www.arduino.cc) [169824.652290] usb 3-10.6: SerialNumber: 854383339353518001F1 [169824.652493] usb 3-10.6: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes [169824.652942] cdc_acm 3-10.6:1.0: ttyACM0: USB ACM device [171016.301150] systemd-hostnamed[28701]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [175866.034601] usb 3-10.6: USB disconnect, device number 7 [176096.759012] systemd-hostnamed[30474]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [176180.851830] usb 3-10.6: new full-speed USB device number 8 using xhci_hcd [176180.958325] usb 3-10.6: New USB device found, idVendor=2341, idProduct=0043 [176180.958327] usb 3-10.6: New USB device strings: Mfr=1, Product=2, SerialNumber=220 [176180.958328] usb 3-10.6: Manufacturer: Arduino (www.arduino.cc) [176180.958329] usb 3-10.6: SerialNumber: 854383339353518001F1 [176180.958421] usb 3-10.6: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes [176180.958763] cdc_acm 3-10.6:1.0: ttyACM0: USB ACM device [177066.337270] usb 3-10.6: USB disconnect, device number 8 [208341.643327] systemd-hostnamed[329]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [343629.946694] systemd-hostnamed[9971]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [773268.701552] cfg80211: World regulatory domain updated: [773268.701555] cfg80211: DFS Master region: unset [773268.701556] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [773268.701558] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [773268.701559] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [773268.701560] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [773268.701562] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [773268.701563] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [773270.029781] Netfilter messages via NETLINK v0.30. [817914.969099] usb 3-12: new full-speed USB device number 9 using xhci_hcd [817915.097835] usb 3-12: New USB device found, idVendor=16c0, idProduct=0483 [817915.097842] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [817915.097846] usb 3-12: Product: USB Serial [817915.097850] usb 3-12: Manufacturer: Teensyduino [817915.097853] usb 3-12: SerialNumber: 136220 [817915.098575] cdc_acm 3-12:1.0: ttyACM0: USB ACM device [817915.536742] usb 3-12: USB disconnect, device number 9 [818268.900720] usb 3-12: new full-speed USB device number 10 using xhci_hcd [818269.029463] usb 3-12: New USB device found, idVendor=16c0, idProduct=0483 [818269.029474] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [818269.029481] usb 3-12: Product: USB Serial [818269.029486] usb 3-12: Manufacturer: Teensyduino [818269.029491] usb 3-12: SerialNumber: 426150 [818269.030819] cdc_acm 3-12:1.0: ttyACM0: USB ACM device [818347.449067] usb 3-12: USB disconnect, device number 10 [818347.815229] usb 3-12: new full-speed USB device number 11 using xhci_hcd [818347.943657] usb 3-12: New USB device found, idVendor=16c0, idProduct=0478 [818347.943659] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [818347.943660] usb 3-12: SerialNumber: 0000A677 [818352.943217] hid-generic 0003:16C0:0478.0004: hidraw3: USB HID v1.11 Device [HID 16c0:0478] on usb-0000:00:14.0-12/input0 [818354.398269] usb 3-12: USB disconnect, device number 11 [818354.666755] usb 3-12: new full-speed USB device number 12 using xhci_hcd [818354.795507] usb 3-12: New USB device found, idVendor=16c0, idProduct=0483 [818354.795509] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [818354.795510] usb 3-12: Product: USB Serial [818354.795511] usb 3-12: Manufacturer: Teensyduino [818354.795511] usb 3-12: SerialNumber: 426150 [818354.795911] cdc_acm 3-12:1.0: ttyACM0: USB ACM device [818445.615253] usb 3-12: USB disconnect, device number 12 [824124.017927] show_signal_msg: 102 callbacks suppressed [824124.017930] test[32230]: segfault at 21ed0 ip 00007fde3c7494a9 sp 00007ffecd0eed58 error 4 in libpython3.4m.so.1.0[7fde3c509000+38b000] [824557.041582] test[763]: segfault at 21ed0 ip 00007fc686d1b4a9 sp 00007fff3dee6048 error 4 in libpython3.4m.so.1.0[7fc686adb000+38b000] [824640.211331] test[1147]: segfault at 40eaf0 ip 000000000040ac9f sp 00007ffe2e4dfd30 error 7 in test[400000+18000] [824797.513095] test[2384]: segfault at 8 ip 00007f9c9a58d8dd sp 00007ffe3b98a890 error 4 in libpython3.4m.so.1.0[7f9c9a450000+38b000] [824880.669056] test[3081]: segfault at 0 ip 000000000040a822 sp 00007ffce12f7280 error 4 in test[400000+18000] [825242.232315] test[4167]: segfault at 0 ip 000000000040a76e sp 00007ffd0f958c80 error 4 in test[400000+18000] [825390.846631] test[4632]: segfault at 0 ip 000000000040a814 sp 00007ffea5fd4250 error 4 in test[400000+18000] [825435.397016] test[5008]: segfault at 0 ip 000000000040a72d sp 00007ffccdb28640 error 4 in test[400000+18000] [825528.216201] test[5926]: segfault at 0 ip 000000000040a854 sp 00007ffc2fe2a510 error 4 in test[400000+18000] [825555.658011] test[6293]: segfault at 0 ip 000000000040a888 sp 00007ffd7a996110 error 4 in test[400000+18000] [825575.922115] test[6660]: segfault at 0 ip 000000000040a888 sp 00007fffbb97fe60 error 4 in test[400000+18000] [825625.732813] test[7036]: segfault at 0 ip 000000000040a888 sp 00007ffcf74bc6f0 error 4 in test[400000+18000] [825678.428321] test[7405]: segfault at 0 ip 000000000040a814 sp 00007ffdb8921bb0 error 4 in test[400000+18000] [825733.708501] test[7815]: segfault at 0 ip 000000000040a814 sp 00007fff7a9f8400 error 4 in test[400000+18000] [825744.778265] test[8200]: segfault at 0 ip 000000000040a814 sp 00007ffe1e8f3f20 error 4 in test[400000+18000] [825755.205150] test[8572]: segfault at 0 ip 000000000040a814 sp 00007fff742efbb0 error 4 in test[400000+18000] [825819.054260] test[8940]: segfault at 0 ip 000000000040a883 sp 00007ffec1aef430 error 4 in test[400000+18000] [825835.911678] test[9316]: segfault at 0 ip 000000000040a883 sp 00007ffea45d0050 error 4 in test[400000+18000] [825851.076159] test[9681]: segfault at 0 ip 000000000040a883 sp 00007ffd7cfcf8f0 error 4 in test[400000+18000] [825927.521414] test[10323]: segfault at 0 ip 000000000040a76d sp 00007ffcbf0e2210 error 4 in test[400000+18000] [827692.813959] test[14292]: segfault at 0 ip 000000000040a729 sp 00007ffe2b8016e0 error 4 in test[400000+18000] [827741.344539] test[15183]: segfault at 0 ip 000000000040a729 sp 00007ffe2d00bfa0 error 4 in test[400000+18000] [829219.785016] test[19028]: segfault at 0 ip 000000000040a9c6 sp 00007ffd9556f650 error 4 in test[400000+18000] [829305.416757] test[19424]: segfault at 0 ip 000000000040a9d5 sp 00007ffd92495d10 error 4 in test[400000+18000] [829331.472801] test[19790]: segfault at 0 ip 000000000040a9da sp 00007ffee27735d0 error 4 in test[400000+18000] [829378.271046] test[20166]: segfault at 0 ip 000000000040a9da sp 00007ffd43b42220 error 4 in test[400000+18000] [829403.781300] test[20534]: segfault at 0 ip 000000000040a9da sp 00007ffd5d4e0cb0 error 4 in test[400000+18000] [829659.972220] test[21527]: segfault at 0 ip 000000000040aa3e sp 00007ffc930eaa60 error 4 in test[400000+18000] [829949.454108] test[23096]: segfault at 8 ip 00007ff25ac99149 sp 00007ffc4a669790 error 4 in libpython3.4m.so.1.0[7ff25aac2000+38b000] [830476.683344] test[25628]: segfault at 8 ip 00007fbd23f77149 sp 00007ffdf3a502c0 error 4 in libpython3.4m.so.1.0[7fbd23da0000+38b000] [830498.663184] test[26026]: segfault at 8 ip 00007f3332e89149 sp 00007ffe14d6c2d0 error 4 in libpython3.4m.so.1.0[7f3332cb2000+38b000] [830542.351404] test[26391]: segfault at 8 ip 00007fc50721d149 sp 00007ffca54c23a0 error 4 in libpython3.4m.so.1.0[7fc507046000+38b000] [858619.543743] SGI XFS with ACLs, security attributes, realtime, no debug enabled [858619.548273] JFS: nTxBlock = 8192, nTxLock = 65536 [858619.554410] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [858619.563091] QNX4 filesystem 0.2.3 registered. [860643.345634] test[13391]: segfault at 8 ip 00007f55a1518149 sp 00007ffd6999b990 error 4 in libpython3.4m.so.1.0[7f55a1341000+38b000] [860671.047829] test[13754]: segfault at 8 ip 00007fd9d93d1149 sp 00007ffc3bab6d40 error 4 in libpython3.4m.so.1.0[7fd9d91fa000+38b000] [860704.796270] test[14122]: segfault at 8 ip 00007fb80a6fa149 sp 00007ffd3fda5850 error 4 in libpython3.4m.so.1.0[7fb80a523000+38b000] [860718.815074] test[14484]: segfault at 8 ip 00007f2bd707d149 sp 00007ffd74ca7040 error 4 in libpython3.4m.so.1.0[7f2bd6ea6000+38b000] [860780.051067] test[14868]: segfault at 8 ip 00007f30cf340930 sp 00007fffa5883868 error 4 in libpython3.4m.so.1.0[7f30cf15b000+38b000] [860800.521250] test[15254]: segfault at 8 ip 00007fd731b50930 sp 00007ffc89600698 error 4 in libpython3.4m.so.1.0[7fd73196b000+38b000] [860812.574669] test[15733]: segfault at 8 ip 00007fcabf0ac930 sp 00007ffd3a634918 error 4 in libpython3.4m.so.1.0[7fcabeec7000+38b000] [860828.236516] test[16096]: segfault at 8 ip 00007feb01a32930 sp 00007ffdc3944458 error 4 in libpython3.4m.so.1.0[7feb0184d000+38b000] [860845.264687] test[16459]: segfault at 8 ip 00007f9a8d5bd930 sp 00007ffc1d2e49c8 error 4 in libpython3.4m.so.1.0[7f9a8d3d8000+38b000] [860882.782679] test[16825]: segfault at 8 ip 00007f2168815930 sp 00007ffcf6070778 error 4 in libpython3.4m.so.1.0[7f2168630000+38b000] [860914.920037] test[17207]: segfault at 8 ip 00007f4a1045c930 sp 00007fff5748c278 error 4 in libpython3.4m.so.1.0[7f4a10277000+38b000] [860936.909592] test[17572]: segfault at 8 ip 00007ff4cd2bf930 sp 00007ffe8613b3e8 error 4 in libpython3.4m.so.1.0[7ff4cd0da000+38b000] [862972.278686] test[22827]: segfault at 8 ip 00007f7b3b6eb149 sp 00007ffea1e86600 error 4 in libpython3.4m.so.1.0[7f7b3b514000+38b000] [901190.272520] systemd-hostnamed[30137]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [947698.351659] systemd-hostnamed[7251]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [948407.289357] unity-scope-loa[8105]: segfault at c0 ip 00007ff6cbf23240 sp 00007ffcd74f4218 error 4 in libgio-2.0.so.0.4002.0[7ff6cbe8f000+16c000] [948530.127394] systemd-hostnamed[9309]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [1030857.185653] device vnet0 entered promiscuous mode [1030857.201659] br0: port 2(vnet0) entered forwarding state [1030857.201666] br0: port 2(vnet0) entered forwarding state [1030857.595483] kvm: zapping shadow pages for mmio generation wraparound [1030858.157436] kvm [27412]: vcpu0 disabled perfctr wrmsr: 0xc2 data 0xffff [1031110.776256] br0: port 2(vnet0) entered disabled state [1031110.777612] device vnet0 left promiscuous mode [1031110.777619] br0: port 2(vnet0) entered disabled state [1118185.098328] systemd-hostnamed[29018]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [1147344.723708] usb 3-10.6: new high-speed USB device number 13 using xhci_hcd [1147344.830434] usb 3-10.6: New USB device found, idVendor=05dc, idProduct=a769 [1147344.830436] usb 3-10.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [1147344.830438] usb 3-10.6: Product: USB Flash Drive [1147344.830439] usb 3-10.6: Manufacturer: Lexar [1147344.830440] usb 3-10.6: SerialNumber: NT6KVYYZUVTEMNKEITB4 [1147344.830531] usb 3-10.6: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [1147344.830534] usb 3-10.6: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [1147344.838261] usb-storage 3-10.6:1.0: USB Mass Storage device detected [1147344.838307] scsi host6: usb-storage 3-10.6:1.0 [1147344.838358] usbcore: registered new interface driver usb-storage [1147344.839394] usbcore: registered new interface driver uas [1147346.339099] scsi 6:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS [1147346.339414] sd 6:0:0:0: Attached scsi generic sg2 type 0 [1147346.340735] sd 6:0:0:0: [sdc] 7700480 512-byte logical blocks: (3.94 GB/3.67 GiB) [1147346.341250] sd 6:0:0:0: [sdc] Write Protect is off [1147346.341252] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [1147346.341820] sd 6:0:0:0: [sdc] No Caching mode page found [1147346.341823] sd 6:0:0:0: [sdc] Assuming drive cache: write through [1147346.344946] sdc: sdc1 [1147346.345735] sd 6:0:0:0: [sdc] Attached SCSI removable disk [1147346.732286] systemd-hostnamed[14841]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [1147399.801798] usb 3-10.6: USB disconnect, device number 13 [1148216.103669] usb 3-4: new high-speed USB device number 14 using xhci_hcd [1148216.234416] usb 3-4: New USB device found, idVendor=05dc, idProduct=a769 [1148216.234418] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [1148216.234419] usb 3-4: Product: USB Flash Drive [1148216.234420] usb 3-4: Manufacturer: Lexar [1148216.234421] usb 3-4: SerialNumber: M79HNWVQZJAZG9F1WQOR [1148216.234534] usb 3-4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [1148216.234538] usb 3-4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [1148216.234908] usb-storage 3-4:1.0: USB Mass Storage device detected [1148216.235010] scsi host7: usb-storage 3-4:1.0 [1148217.833802] scsi 7:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS [1148217.834089] sd 7:0:0:0: Attached scsi generic sg2 type 0 [1148217.835130] sd 7:0:0:0: [sdc] 7700480 512-byte logical blocks: (3.94 GB/3.67 GiB) [1148217.835654] sd 7:0:0:0: [sdc] Write Protect is off [1148217.835657] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00 [1148217.836486] sd 7:0:0:0: [sdc] No Caching mode page found [1148217.836488] sd 7:0:0:0: [sdc] Assuming drive cache: write through [1148217.839613] sdc: sdc1 [1148217.840466] sd 7:0:0:0: [sdc] Attached SCSI removable disk [1148218.361913] systemd-hostnamed[15979]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [1148313.970226] sdc: detected capacity change from 3942645760 to 0 [1148319.008756] usb 3-4: USB disconnect, device number 14 [1297794.232790] systemd-hostnamed[16661]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [1636516.907796] systemd-hostnamed[25676]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [1636575.301197] init: smbd main process (1038) killed by TERM signal [1636578.345569] init: samba-ad-dc main process (27485) terminated with status 1 [2073014.744533] systemd-hostnamed[9609]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [2115522.045394] usb 3-10.6: new full-speed USB device number 15 using xhci_hcd [2115522.151471] usb 3-10.6: New USB device found, idVendor=2a03, idProduct=0043 [2115522.151473] usb 3-10.6: New USB device strings: Mfr=1, Product=2, SerialNumber=220 [2115522.151475] usb 3-10.6: Product: Arduino Uno [2115522.151476] usb 3-10.6: Manufacturer: Arduino Srl [2115522.151477] usb 3-10.6: SerialNumber: 7543933333535101D142 [2115522.151587] usb 3-10.6: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes [2115522.151936] cdc_acm 3-10.6:1.0: ttyACM0: USB ACM device [2125790.668357] systemd-hostnamed[5488]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [2245721.007496] usb 3-10.6: USB disconnect, device number 15 [2509761.182736] usb 3-10.6: new full-speed USB device number 16 using xhci_hcd [2509761.288839] usb 3-10.6: New USB device found, idVendor=2a03, idProduct=0043 [2509761.288841] usb 3-10.6: New USB device strings: Mfr=1, Product=2, SerialNumber=220 [2509761.288842] usb 3-10.6: Product: Arduino Uno [2509761.288843] usb 3-10.6: Manufacturer: Arduino Srl [2509761.288844] usb 3-10.6: SerialNumber: 7543933333535101D142 [2509761.288953] usb 3-10.6: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes [2509761.289298] cdc_acm 3-10.6:1.0: ttyACM0: USB ACM device [2511223.140190] usb 3-10.6: USB disconnect, device number 16 [2512605.782236] systemd-hostnamed[15824]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [2586738.491085] usb 3-10.6: new low-speed USB device number 17 using xhci_hcd [2586738.599893] usb 3-10.6: New USB device found, idVendor=1bcf, idProduct=0005 [2586738.599895] usb 3-10.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [2586738.599896] usb 3-10.6: Product: USB Optical Mouse [2586738.600006] usb 3-10.6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [2586738.605505] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.6/3-10.6:1.0/0003:1BCF:0005.0005/input/input19 [2586738.663207] hid-generic 0003:1BCF:0005.0005: input,hidraw3: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-10.6/input0 [2586762.596290] usb 3-10.6: USB disconnect, device number 17