[  778.197353] mpt2sas0: fault_state(0x265d)!
[  778.197387] mpt2sas0: sending diag reset !!
[  779.156093] mpt2sas0: diag reset: SUCCESS
[  779.675944] mpt2sas0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100)
[  779.675977] mpt2sas0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100)
[  779.675983] mpt2sas0: LSISAS2008: FWVersion(06.00.00.00), ChipRevision(0x03), BiosVersion(07.07.00.00)
[  779.675984] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[  779.676038] mpt2sas0: sending port enable !!
[  787.341041] mpt2sas0: port enable: SUCCESS
[  787.341135] mpt2sas0: search for end-devices: start
[  787.341823] scsi target0:0:0: handle(0x0009), sas_addr(0x5000c50096b86575), enclosure logical id(0x500a0d1000574c60), slot(0)
[  787.341895] scsi target0:0:1: handle(0x000a), sas_addr(0x5000c50054f34431), enclosure logical id(0x500a0d1000574c60), slot(1)
[  787.341966] scsi target0:0:2: handle(0x000b), sas_addr(0x5000c50054f2d8a1), enclosure logical id(0x500a0d1000574c60), slot(2)
[  787.342037] scsi target0:0:3: handle(0x000c), sas_addr(0x5000c50054dac959), enclosure logical id(0x500a0d1000574c60), slot(3)
[  787.342112] mpt2sas0: search for end-devices: complete
[  787.342114] mpt2sas0: search for raid volumes: start
[  787.342237] scsi target0:1:0: handle(0x00ac), wwid(0x0ac12ab4be1f1182)
[  787.342591] mpt2sas0: search for responding raid volumes: complete
[  787.342592] mpt2sas0: search for expanders: start
[  787.342593] mpt2sas0: search for expanders: complete
[  787.342596] mpt2sas0: search for end-devices: start
[  787.343215] scsi target0:0:0: handle(0x0009), sas_addr(0x5000c50096b86575), enclosure logical id(0x500a0d1000574c60), slot(0)
[  787.343286] scsi target0:0:1: handle(0x000a), sas_addr(0x5000c50054f34431), enclosure logical id(0x500a0d1000574c60), slot(1)
[  787.343357] scsi target0:0:2: handle(0x000b), sas_addr(0x5000c50054f2d8a1), enclosure logical id(0x500a0d1000574c60), slot(2)
[  787.343428] scsi target0:0:3: handle(0x000c), sas_addr(0x5000c50054dac959), enclosure logical id(0x500a0d1000574c60), slot(3)
[  787.343495] mpt2sas0: search for end-devices: complete
[  787.343497] mpt2sas0: search for raid volumes: start
[  787.343614] scsi target0:1:0: handle(0x00ac), wwid(0x0ac12ab4be1f1182)
[  787.343965] mpt2sas0: search for responding raid volumes: complete
[  787.343967] mpt2sas0: search for expanders: start
[  787.343968] mpt2sas0: search for expanders: complete
[  787.343972] mpt2sas0: _base_fault_reset_work: hard reset: success
[  787.343975] mpt2sas0: removing unresponding devices: start
[  787.343977] mpt2sas0: removing unresponding devices: end-devices
[  787.343978] mpt2sas0: removing unresponding devices: volumes
[  787.343979] mpt2sas0: removing unresponding devices: expanders
[  787.343981] mpt2sas0: removing unresponding devices: complete
[  787.343983] mpt2sas0: scan devices: start
[  787.344327] mpt2sas0:        scan devices: expanders start
[  787.344395] mpt2sas0:        break from expander scan: ioc_status(0x0022), loginfo(0x310f0400)
[  787.344396] mpt2sas0:        scan devices: expanders complete
[  787.344397] mpt2sas0:        scan devices phys disk start
[  787.344693] mpt2sas0:        break from phys disk scan:ioc_status(0x0022), loginfo(0x00000000)
[  787.344695] mpt2sas0:        scan devices: phys disk complete
[  787.344696] mpt2sas0:        scan devices: volumes start
[  787.344811] mpt2sas0:        break from volume scan: ioc_status(0x0022), loginfo(0x00000000)
[  787.344812] mpt2sas0:        scan devices: volumes complete
[  787.344813] mpt2sas0:        scan devices: end devices start
[  787.345841] mpt2sas0:        break from end device scan: ioc_status(0x0022), loginfo(0x310f0400)
[  787.345843] mpt2sas0:        scan devices: end devices complete
[  787.345844] mpt2sas0: scan devices: complete