[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-42-generic (buildd@lgw01-24) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #48~14.04.1-Ubuntu SMP Fri Dec 18 10:24:49 UTC 2015 (Ubuntu 3.19.0-42.48~14.04.1-generic 3.19.8-ckt10) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.19.0-42-generic root=UUID=e07a4573-4e21-4b17-9717-bc6bc5b1f0e0 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] tseg: 00bf800000 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be1e2fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000be1e3000-0x00000000be4f5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4f6000-0x00000000be8defff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8df000-0x00000000bee31fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee32000-0x00000000bee32fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee33000-0x00000000bf038fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf039000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000083effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Extreme3, BIOS P1.80 07/31/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EAFFF uncachable [ 0.000000] EB000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000083f000000 aka 33776M [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC [ 0.000000] total RAM covered: 3064M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd8f0-0x000fd8ff] mapped at [ffff8800000fd8f0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x83ee00000-0x83effffff] [ 0.000000] [mem 0x83ee00000-0x83effffff] page 2M [ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x820000000-0x83edfffff] [ 0.000000] [mem 0x820000000-0x83edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x800000000-0x81fffffff] [ 0.000000] [mem 0x800000000-0x81fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbe1e2fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbdffffff] page 2M [ 0.000000] [mem 0xbe000000-0xbe1e2fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbee32000-0xbee32fff] [ 0.000000] [mem 0xbee32000-0xbee32fff] page 4k [ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbf039000-0xbf452fff] [ 0.000000] [mem 0xbf039000-0xbf1fffff] page 4k [ 0.000000] [mem 0xbf200000-0xbf3fffff] page 2M [ 0.000000] [mem 0xbf400000-0xbf452fff] page 4k [ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbf7f4000-0xbf7fffff] [ 0.000000] [mem 0xbf7f4000-0xbf7fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100001000-0x7ffffffff] [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M [ 0.000000] [mem 0x140000000-0x7ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x35a2c000-0x36d0dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BE8CF070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BE8D5298 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-654) [ 0.000000] ACPI: DSDT 0x00000000BE8CF170 006123 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BE8D8080 000040 [ 0.000000] ACPI: APIC 0x00000000BE8D53A8 00007E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BE8D5428 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000BE8D5470 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: AAFT 0x00000000BE8D54B0 000062 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BE8D5518 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 0x00000000BE8D5550 000D40 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: BGRT 0x00000000BE8D6290 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000083effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x83eff5000-0x83eff9fff] [ 0.000000] [ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081e600000-ffff88083e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x83effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbe1e2fff] [ 0.000000] node 0: [mem 0xbee32000-0xbee32fff] [ 0.000000] node 0: [mem 0xbf039000-0xbf452fff] [ 0.000000] node 0: [mem 0xbf7f4000-0xbf7fffff] [ 0.000000] node 0: [mem 0x100001000-0x83effffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x83effffff] [ 0.000000] On node 0 totalpages: 8377767 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12121 pages used for memmap [ 0.000000] DMA32 zone: 775690 pages, LIFO batch:31 [ 0.000000] Normal zone: 118720 pages used for memmap [ 0.000000] Normal zone: 7598079 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe1e3000-0xbe4f5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe4f6000-0xbe8defff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe8df000-0xbee31fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbee33000-0xbf038fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] e820: [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88083ec00000 s86144 r8192 d32640 u524288 [ 0.000000] pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8246841 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-42-generic root=UUID=e07a4573-4e21-4b17-9717-bc6bc5b1f0e0 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0x29c0000000-0x29c1ffffff] (32MB) [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 32818740K/33511068K available (7922K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 692328K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:1000 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3791.970 MHz processor [ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 7583.94 BogoMIPS (lpj=15167880) [ 0.000025] pid_max: default: 32768 minimum: 301 [ 0.000030] ACPI: Core revision 20141107 [ 0.002754] ACPI: All ACPI Tables successfully acquired [ 0.002774] Security Framework initialized [ 0.002788] AppArmor: AppArmor initialized [ 0.002789] Yama: becoming mindful. [ 0.004981] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.012673] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.015980] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.016019] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.016385] Initializing cgroup subsys memory [ 0.016391] Initializing cgroup subsys devices [ 0.016393] Initializing cgroup subsys freezer [ 0.016395] Initializing cgroup subsys net_cls [ 0.016398] Initializing cgroup subsys blkio [ 0.016400] Initializing cgroup subsys perf_event [ 0.016402] Initializing cgroup subsys net_prio [ 0.016404] Initializing cgroup subsys hugetlb [ 0.016421] CPU: Physical Processor ID: 0 [ 0.016422] CPU: Processor Core ID: 0 [ 0.016424] mce: CPU supports 7 MCE banks [ 0.016429] LVT offset 1 assigned for vector 0xf9 [ 0.016434] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.016434] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.016514] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000) [ 0.020080] ftrace: allocating 30027 entries in 118 pages [ 0.030940] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070619] smpboot: CPU0: AMD FX(tm)-4130 Quad-Core Processor (fam: 15, model: 01, stepping: 02) [ 0.175652] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.175657] ... version: 0 [ 0.175658] ... bit width: 48 [ 0.175659] ... generic registers: 6 [ 0.175660] ... value mask: 0000ffffffffffff [ 0.175661] ... max period: 00007fffffffffff [ 0.175661] ... fixed-purpose events: 0 [ 0.175662] ... event mask: 000000000000003f [ 0.176383] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.176474] x86: Booting SMP configuration: [ 0.176475] .... node #0, CPUs: #1 #2 #3 [ 0.215928] x86: Booted up 1 node, 4 CPUs [ 0.215931] smpboot: Total of 4 processors activated (30335.76 BogoMIPS) [ 0.220076] devtmpfs: initialized [ 0.226401] evm: security.selinux [ 0.226402] evm: security.SMACK64 [ 0.226403] evm: security.SMACK64EXEC [ 0.226404] evm: security.SMACK64TRANSMUTE [ 0.226405] evm: security.SMACK64MMAP [ 0.226406] evm: security.ima [ 0.226407] evm: security.capability [ 0.226467] PM: Registering ACPI NVS region [mem 0xbe4f6000-0xbe8defff] (4100096 bytes) [ 0.226534] PM: Registering ACPI NVS region [mem 0xbee33000-0xbf038fff] (2121728 bytes) [ 0.226711] pinctrl core: initialized pinctrl subsystem [ 0.226815] RTC time: 15:48:14, date: 02/13/16 [ 0.226912] NET: Registered protocol family 16 [ 0.227649] cpuidle: using governor ladder [ 0.231649] cpuidle: using governor menu [ 0.231711] ACPI: bus type PCI registered [ 0.231713] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.231787] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.231789] PCI: not using MMCONFIG [ 0.231791] PCI: Using configuration type 1 for base access [ 0.231791] PCI: Using configuration type 1 for extended access [ 0.236091] ACPI: Added _OSI(Module Device) [ 0.236093] ACPI: Added _OSI(Processor Device) [ 0.236094] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.236096] ACPI: Added _OSI(Processor Aggregator Device) [ 0.238068] ACPI: Executed 3 blocks of module-level executable AML code [ 0.241259] ACPI: Interpreter enabled [ 0.241264] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.241268] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.241283] ACPI: (supports S0 S3 S4 S5) [ 0.241284] ACPI: Using IOAPIC for interrupt routing [ 0.241420] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.241460] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.241822] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.248018] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.248022] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.248027] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.248474] PCI host bridge to bus 0000:00 [ 0.248476] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.248478] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 0.248480] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 0.248481] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] [ 0.248483] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.248485] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.248486] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.248488] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 0.248498] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.248628] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.248666] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.248713] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.248758] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.248794] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.248840] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.248889] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.248904] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] [ 0.248912] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] [ 0.248920] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] [ 0.248927] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] [ 0.248934] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] [ 0.248942] pci 0000:00:11.0: reg 0x24: [mem 0xfe20b000-0xfe20b3ff] [ 0.248959] pci 0000:00:11.0: set SATA to AHCI mode [ 0.249060] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.249071] pci 0000:00:12.0: reg 0x10: [mem 0xfe20a000-0xfe20afff] [ 0.249155] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.249198] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.249213] pci 0000:00:12.2: reg 0x10: [mem 0xfe209000-0xfe2090ff] [ 0.249278] pci 0000:00:12.2: supports D1 D2 [ 0.249280] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.249326] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.249370] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.249380] pci 0000:00:13.0: reg 0x10: [mem 0xfe208000-0xfe208fff] [ 0.249465] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.249508] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.249523] pci 0000:00:13.2: reg 0x10: [mem 0xfe207000-0xfe2070ff] [ 0.249588] pci 0000:00:13.2: supports D1 D2 [ 0.249589] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.249636] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.249682] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.249803] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.249813] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] [ 0.249821] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] [ 0.249828] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] [ 0.249836] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] [ 0.249843] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] [ 0.249859] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.249861] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.249862] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.249864] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.249942] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.249959] pci 0000:00:14.2: reg 0x10: [mem 0xfe200000-0xfe203fff 64bit] [ 0.250012] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.250057] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.250097] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.250219] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.250286] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.250325] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.250335] pci 0000:00:14.5: reg 0x10: [mem 0xfe206000-0xfe206fff] [ 0.250420] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.250463] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.250524] pci 0000:00:15.0: supports D1 D2 [ 0.250574] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.250618] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400 [ 0.250679] pci 0000:00:15.3: supports D1 D2 [ 0.250727] pci 0000:00:15.3: System wakeup disabled by ACPI [ 0.250770] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.250780] pci 0000:00:16.0: reg 0x10: [mem 0xfe205000-0xfe205fff] [ 0.250864] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.250908] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.250922] pci 0000:00:16.2: reg 0x10: [mem 0xfe204000-0xfe2040ff] [ 0.250987] pci 0000:00:16.2: supports D1 D2 [ 0.250989] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.251035] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.251078] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.251159] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.251235] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.251311] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.251390] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.251466] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.251595] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000 [ 0.251605] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.251614] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.251627] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.251633] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.251639] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref] [ 0.251728] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300 [ 0.251738] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff] [ 0.259638] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.259642] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.259645] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff] [ 0.259648] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.259704] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.259721] pci 0000:02:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit] [ 0.259797] pci 0000:02:00.0: supports D1 D2 [ 0.259799] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.267633] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.267638] pci 0000:00:09.0: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.267710] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.267718] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) [ 0.267719] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 0.267721] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) [ 0.267722] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.267724] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.267726] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.267727] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.267781] pci 0000:00:15.0: PCI bridge to [bus 04] [ 0.267857] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.267876] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.267902] pci 0000:05:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref] [ 0.267918] pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref] [ 0.268007] pci 0000:05:00.0: supports D1 D2 [ 0.268008] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.275634] pci 0000:00:15.3: PCI bridge to [bus 05] [ 0.275639] pci 0000:00:15.3: bridge window [io 0xd000-0xdfff] [ 0.275645] pci 0000:00:15.3: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.275698] pci_bus 0000:00: on NUMA node 0 [ 0.276272] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0 [ 0.276339] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0 [ 0.276407] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0 [ 0.276475] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0 [ 0.276530] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0 [ 0.276574] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0 [ 0.276618] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0 [ 0.276662] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0 [ 0.276860] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.276862] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.276863] vgaarb: loaded [ 0.276864] vgaarb: bridge control possible 0000:01:00.0 [ 0.277103] SCSI subsystem initialized [ 0.277147] libata version 3.00 loaded. [ 0.277173] ACPI: bus type USB registered [ 0.277194] usbcore: registered new interface driver usbfs [ 0.277204] usbcore: registered new interface driver hub [ 0.277223] usbcore: registered new device driver usb [ 0.277369] PCI: Using ACPI for IRQ routing [ 0.283857] PCI: pci_cache_line_size set to 64 bytes [ 0.283913] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.283915] e820: reserve RAM buffer [mem 0xbe1e3000-0xbfffffff] [ 0.283917] e820: reserve RAM buffer [mem 0xbee33000-0xbfffffff] [ 0.283918] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] [ 0.283919] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.283920] e820: reserve RAM buffer [mem 0x83f000000-0x83fffffff] [ 0.284026] NetLabel: Initializing [ 0.284027] NetLabel: domain hash size = 128 [ 0.284028] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.284040] NetLabel: unlabeled traffic allowed by default [ 0.284108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.284111] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.286168] Switched to clocksource hpet [ 0.293475] AppArmor: AppArmor Filesystem Enabled [ 0.293539] pnp: PnP ACPI init [ 0.293659] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.293663] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.293788] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.293791] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293868] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294154] system 00:03: [io 0x040b] has been reserved [ 0.294156] system 00:03: [io 0x04d6] has been reserved [ 0.294158] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.294160] system 00:03: [io 0x0c14] has been reserved [ 0.294162] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.294172] system 00:03: [io 0x0c52] has been reserved [ 0.294174] system 00:03: [io 0x0c6c] has been reserved [ 0.294175] system 00:03: [io 0x0c6f] has been reserved [ 0.294177] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.294179] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.294180] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.294182] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.294184] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.294186] system 00:03: [io 0x0800-0x089f] could not be reserved [ 0.294188] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.294189] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.294191] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.294193] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.294195] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.294198] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.294200] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.294202] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.294204] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.294206] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.294208] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.294210] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294302] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.294304] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294509] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.294570] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.294573] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294615] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294777] pnp 00:08: [dma 0 disabled] [ 0.294814] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.295070] pnp: PnP ACPI: found 9 devices [ 0.301850] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.301853] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.301857] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff] [ 0.301859] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.301862] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.301865] pci 0000:00:09.0: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.301869] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.301878] pci 0000:00:15.0: PCI bridge to [bus 04] [ 0.301885] pci 0000:00:15.3: PCI bridge to [bus 05] [ 0.301888] pci 0000:00:15.3: bridge window [io 0xd000-0xdfff] [ 0.301893] pci 0000:00:15.3: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.301898] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.301899] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.301901] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 0.301902] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 0.301904] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 0.301906] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 0.301907] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff] [ 0.301909] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.301911] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff] [ 0.301912] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.301914] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff] [ 0.301916] pci_bus 0000:03: resource 4 [io 0x0000-0x03af] [ 0.301918] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7] [ 0.301919] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df] [ 0.301921] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff] [ 0.301922] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff] [ 0.301924] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff] [ 0.301925] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff] [ 0.301927] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.301929] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.301951] NET: Registered protocol family 2 [ 0.302250] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.302747] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.302943] TCP: Hash tables configured (established 262144 bind 65536) [ 0.302972] TCP: reno registered [ 0.303011] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.303152] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.303294] NET: Registered protocol family 1 [ 0.594449] pci 0000:01:00.0: Video device with shadowed ROM [ 0.594617] PCI: CLS 64 bytes, default 64 [ 0.594674] Trying to unpack rootfs image as initramfs... [ 0.858258] Freeing initrd memory: 19336K (ffff880035a2c000 - ffff880036d0e000) [ 0.858529] PCI-DMA: Disabling AGP. [ 0.858593] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.858594] PCI-DMA: using GART IOMMU. [ 0.858597] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.862430] perf: AMD NB counters detected [ 0.862487] microcode: CPU0: patch_level=0x06000626 [ 0.862493] microcode: CPU1: patch_level=0x06000626 [ 0.862505] microcode: CPU2: patch_level=0x06000626 [ 0.862514] microcode: CPU3: patch_level=0x06000626 [ 0.862572] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.862576] LVT offset 0 assigned for vector 0x400 [ 0.862589] perf: AMD IBS detected (0x000000ff) [ 0.862614] Scanning for low memory corruption every 60 seconds [ 0.862941] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.862958] Initialise system trusted keyring [ 0.862976] audit: initializing netlink subsys (disabled) [ 0.862991] audit: type=2000 audit(1455378494.756:1): initialized [ 0.863307] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.865117] zpool: loaded [ 0.865120] zbud: loaded [ 0.865261] VFS: Disk quotas dquot_6.5.2 [ 0.865298] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.865808] fuse init (API version 7.23) [ 0.865957] Key type big_key registered [ 0.866366] Key type asymmetric registered [ 0.866368] Asymmetric key parser 'x509' registered [ 0.866406] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.866448] io scheduler noop registered [ 0.866450] io scheduler deadline registered (default) [ 0.866484] io scheduler cfq registered [ 0.867027] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.867043] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.867148] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.867151] ACPI: Power Button [PWRB] [ 0.867192] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.867194] ACPI: Power Button [PWRF] [ 0.867231] ACPI: acpi_idle registered with cpuidle [ 0.867642] GHES: HEST is not enabled! [ 0.867749] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.888152] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.889893] Linux agpgart interface v0.103 [ 0.891309] brd: module loaded [ 0.892010] loop: module loaded [ 0.892225] libphy: Fixed MDIO Bus: probed [ 0.892228] tun: Universal TUN/TAP device driver, 1.6 [ 0.892229] tun: (C) 1999-2004 Max Krasnyansky [ 0.892275] PPP generic driver version 2.4.2 [ 0.892406] QUIRK: Enable AMD PLL fix [ 0.892417] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.892422] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 0.892582] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.892584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.892585] usb usb1: Product: xHCI Host Controller [ 0.892587] usb usb1: Manufacturer: Linux 3.19.0-42-generic xhci-hcd [ 0.892588] usb usb1: SerialNumber: 0000:02:00.0 [ 0.892697] hub 1-0:1.0: USB hub found [ 0.892704] hub 1-0:1.0: 2 ports detected [ 0.892795] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.892798] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 0.892812] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.892829] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.892831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.892832] usb usb2: Product: xHCI Host Controller [ 0.892834] usb usb2: Manufacturer: Linux 3.19.0-42-generic xhci-hcd [ 0.892835] usb usb2: SerialNumber: 0000:02:00.0 [ 0.892933] hub 2-0:1.0: USB hub found [ 0.892940] hub 2-0:1.0: 2 ports detected [ 0.893027] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.893031] ehci-pci: EHCI PCI platform driver [ 0.893160] ehci-pci 0000:00:12.2: EHCI Host Controller [ 0.893164] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 0.893167] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.893176] ehci-pci 0000:00:12.2: debug port 1 [ 0.893207] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe209000 [ 0.902081] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.902136] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.902138] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.902139] usb usb3: Product: EHCI Host Controller [ 0.902141] usb usb3: Manufacturer: Linux 3.19.0-42-generic ehci_hcd [ 0.902142] usb usb3: SerialNumber: 0000:00:12.2 [ 0.902257] hub 3-0:1.0: USB hub found [ 0.902262] hub 3-0:1.0: 5 ports detected [ 0.902508] ehci-pci 0000:00:13.2: EHCI Host Controller [ 0.902513] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 0.902516] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.902524] ehci-pci 0000:00:13.2: debug port 1 [ 0.902546] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe207000 [ 0.914139] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.914249] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.914254] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.914259] usb usb4: Product: EHCI Host Controller [ 0.914263] usb usb4: Manufacturer: Linux 3.19.0-42-generic ehci_hcd [ 0.914266] usb usb4: SerialNumber: 0000:00:13.2 [ 0.914425] hub 4-0:1.0: USB hub found [ 0.914431] hub 4-0:1.0: 5 ports detected [ 0.914682] ehci-pci 0000:00:16.2: EHCI Host Controller [ 0.914686] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 0.914689] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.914698] ehci-pci 0000:00:16.2: debug port 1 [ 0.914721] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe204000 [ 0.926136] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 0.926249] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.926255] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.926259] usb usb5: Product: EHCI Host Controller [ 0.926263] usb usb5: Manufacturer: Linux 3.19.0-42-generic ehci_hcd [ 0.926267] usb usb5: SerialNumber: 0000:00:16.2 [ 0.926425] hub 5-0:1.0: USB hub found [ 0.926430] hub 5-0:1.0: 4 ports detected [ 0.926551] ehci-platform: EHCI generic platform driver [ 0.926562] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.926566] ohci-pci: OHCI PCI platform driver [ 0.926693] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 0.926697] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 0.926720] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe20a000 [ 0.986190] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.986192] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.986194] usb usb6: Product: OHCI PCI host controller [ 0.986196] usb usb6: Manufacturer: Linux 3.19.0-42-generic ohci_hcd [ 0.986197] usb usb6: SerialNumber: 0000:00:12.0 [ 0.986331] hub 6-0:1.0: USB hub found [ 0.986339] hub 6-0:1.0: 5 ports detected [ 0.986579] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 0.986584] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 0.986600] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe208000 [ 1.046141] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.046144] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.046145] usb usb7: Product: OHCI PCI host controller [ 1.046147] usb usb7: Manufacturer: Linux 3.19.0-42-generic ohci_hcd [ 1.046148] usb usb7: SerialNumber: 0000:00:13.0 [ 1.046289] hub 7-0:1.0: USB hub found [ 1.046296] hub 7-0:1.0: 5 ports detected [ 1.046536] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.046541] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 1.046557] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe206000 [ 1.106122] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.106125] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.106127] usb usb8: Product: OHCI PCI host controller [ 1.106128] usb usb8: Manufacturer: Linux 3.19.0-42-generic ohci_hcd [ 1.106129] usb usb8: SerialNumber: 0000:00:14.5 [ 1.106258] hub 8-0:1.0: USB hub found [ 1.106266] hub 8-0:1.0: 2 ports detected [ 1.106465] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.106471] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 1.106488] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe205000 [ 1.166124] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.166127] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.166129] usb usb9: Product: OHCI PCI host controller [ 1.166131] usb usb9: Manufacturer: Linux 3.19.0-42-generic ohci_hcd [ 1.166132] usb usb9: SerialNumber: 0000:00:16.0 [ 1.166271] hub 9-0:1.0: USB hub found [ 1.166278] hub 9-0:1.0: 4 ports detected [ 1.166402] ohci-platform: OHCI generic platform driver [ 1.166412] uhci_hcd: USB Universal Host Controller Interface driver [ 1.166462] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.169187] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.169191] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.169388] mousedev: PS/2 mouse device common for all mice [ 1.169556] rtc_cmos 00:05: RTC can wake from S4 [ 1.169659] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.169680] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.169688] i2c /dev entries driver [ 1.169761] device-mapper: uevent: version 1.0.3 [ 1.169830] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 1.169846] ledtrig-cpu: registered to indicate activity on CPUs [ 1.169989] PCCT header not found. [ 1.169990] ACPI PCC probe failed. [ 1.170111] TCP: cubic registered [ 1.170227] NET: Registered protocol family 10 [ 1.170432] NET: Registered protocol family 17 [ 1.170442] Key type dns_resolver registered [ 1.170824] Loading compiled-in X.509 certificates [ 1.171661] Loaded X.509 cert 'Magrathea: Glacier signing key: 759bcd6455a9dfaba6111485d04eded53ab83150' [ 1.171675] registered taskstats version 1 [ 1.173600] Key type trusted registered [ 1.177005] Key type encrypted registered [ 1.177011] AppArmor: AppArmor sha1 policy hashing enabled [ 1.177014] ima: No TPM chip found, activating TPM-bypass! [ 1.177033] evm: HMAC attrs: 0x1 [ 1.177345] Magic number: 4:330:841 [ 1.177424] rtc_cmos 00:05: setting system clock to 2016-02-13 15:48:15 UTC (1455378495) [ 1.177581] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.177756] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.177757] EDD information not available. [ 1.177837] PM: Hibernation image not present or could not be loaded. [ 1.178272] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000) [ 1.178273] Write protecting the kernel read-only data: 12288k [ 1.178507] Freeing unused kernel memory: 256K (ffff8800017c0000 - ffff880001800000) [ 1.178634] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000) [ 1.189819] systemd-udevd[122]: starting version 204 [ 1.215954] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.215965] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.216644] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90003174000, bc:5f:f4:79:8b:bd, XID 0c900800 IRQ 28 [ 1.216647] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.216913] scsi host0: pata_atiixp [ 1.217062] scsi host1: pata_atiixp [ 1.217110] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.217112] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.217136] ahci 0000:00:11.0: version 3.0 [ 1.217372] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.217375] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.218507] scsi host2: ahci [ 1.218780] scsi host3: ahci [ 1.218946] scsi host4: ahci [ 1.219073] scsi host5: ahci [ 1.219142] ata3: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b100 irq 19 [ 1.219144] ata4: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b180 irq 19 [ 1.219146] ata5: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b200 irq 19 [ 1.219148] ata6: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b280 irq 19 [ 1.237983] usb 5-1: new high-speed USB device number 2 using ehci-pci [ 1.385213] ata1.00: ATAPI: ASUS DRW-24F1ST b, 1.00, max UDMA/100 [ 1.385218] ata1.00: limited to UDMA/33 due to 40-wire cable [ 1.398403] ata1.00: configured for UDMA/33 [ 1.399812] scsi 0:0:0:0: CD-ROM ASUS DRW-24F1ST b 1.00 PQ: 0 ANSI: 5 [ 1.419608] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.419614] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.419879] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.419963] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.447326] usb 5-1: New USB device found, idVendor=0bc2, idProduct=ab36 [ 1.447329] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.447331] usb 5-1: Product: Backup+ Desk [ 1.447333] usb 5-1: Manufacturer: Seagate [ 1.447334] usb 5-1: SerialNumber: NA7DPT6J [ 1.450558] usbcore: registered new interface driver usb-storage [ 1.452766] scsi host6: uas [ 1.452853] usbcore: registered new interface driver uas [ 1.453459] scsi 6:0:0:0: Direct-Access Seagate Backup+ Desk 0511 PQ: 0 ANSI: 6 [ 1.454753] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 1.455078] sd 6:0:0:0: [sda] 15628053167 512-byte logical blocks: (8.00 TB/7.27 TiB) [ 1.455081] sd 6:0:0:0: [sda] 4096-byte physical blocks [ 1.456069] sd 6:0:0:0: [sda] Write Protect is off [ 1.456072] sd 6:0:0:0: [sda] Mode Sense: 53 00 00 08 [ 1.456584] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.473939] usb 6-1: new full-speed USB device number 2 using ohci-pci [ 1.474024] usb 3-3: new high-speed USB device number 3 using ehci-pci [ 1.494809] Alternate GPT is invalid, using primary GPT. [ 1.494823] sda: sda1 sda2 [ 1.497182] sd 6:0:0:0: [sda] Attached SCSI disk [ 1.538022] ata6: SATA link down (SStatus 0 SControl 300) [ 1.542027] ata5: SATA link down (SStatus 0 SControl 300) [ 1.640594] usb 3-3: New USB device found, idVendor=041e, idProduct=4071 [ 1.640597] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.640599] usb 3-3: Product: VF0415 Live! Cam Vid. IM Ultra [ 1.640601] usb 3-3: Manufacturer: Creative Technology Ltd. [ 1.640942] usb 6-1: New USB device found, idVendor=058f, idProduct=9254 [ 1.640945] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.640947] usb 6-1: Product: Generic USB Hub [ 1.640949] usb 6-1: Manufacturer: ALCOR [ 1.643175] hub 6-1:1.0: USB hub found [ 1.645028] hub 6-1:1.0: 4 ports detected [ 1.709979] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.713974] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.715937] ata4.00: supports DRM functions and may not be fully accessible [ 1.716040] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.716046] ata4.00: ATA-9: Samsung SSD 850 EVO 1TB, EMT01B6Q, max UDMA/133 [ 1.716050] ata4.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.716381] ata4.00: supports DRM functions and may not be fully accessible [ 1.716454] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.716514] ata4.00: configured for UDMA/133 [ 1.724642] ata3.00: ATA-9: INTEL SSDSC2BW120A4, DC32, max UDMA/133 [ 1.724645] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.750977] ata3.00: configured for UDMA/133 [ 1.751219] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 DC32 PQ: 0 ANSI: 5 [ 1.751426] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.751477] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.751575] sd 2:0:0:0: [sdb] Write Protect is off [ 1.751578] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.751603] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.751621] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.751892] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.751903] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.752015] sd 3:0:0:0: [sdc] Write Protect is off [ 1.752018] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.752058] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.752447] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 1.752500] sdc: sdc1 [ 1.752798] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.752940] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.805093] EXT4-fs (sdb6): INFO: recovery required on readonly filesystem [ 1.805096] EXT4-fs (sdb6): write access will be enabled during recovery [ 1.861847] tsc: Refined TSC clocksource calibration: 3791.785 MHz [ 1.903622] EXT4-fs (sdb6): orphan cleanup on readonly fs [ 1.934039] EXT4-fs (sdb6): 80 orphan inodes deleted [ 1.934041] EXT4-fs (sdb6): recovery complete [ 1.937941] usb 6-1.1: new low-speed USB device number 3 using ohci-pci [ 1.985447] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 2.068866] usb 6-1.1: New USB device found, idVendor=04d9, idProduct=1702 [ 2.068870] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.068872] usb 6-1.1: Product: USB Keyboard [ 2.068873] usb 6-1.1: Manufacturer: [ 2.092930] random: init urandom read with 77 bits of entropy available [ 2.114318] init: plymouth-upstart-bridge main process (204) terminated with status 1 [ 2.114329] init: plymouth-upstart-bridge main process ended, respawning [ 2.120085] init: plymouth-upstart-bridge main process (213) terminated with status 1 [ 2.120096] init: plymouth-upstart-bridge main process ended, respawning [ 2.125498] init: plymouth-upstart-bridge main process (217) terminated with status 1 [ 2.125509] init: plymouth-upstart-bridge main process ended, respawning [ 2.145795] usb 6-1.2: new full-speed USB device number 4 using ohci-pci [ 2.213837] Adding 1279996k swap on /dev/sdb5. Priority:-1 extents:1 across:1279996k SSFS [ 2.255825] usb 6-1.2: New USB device found, idVendor=046d, idProduct=c52b [ 2.255829] usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.255834] usb 6-1.2: Product: USB Receiver [ 2.255836] usb 6-1.2: Manufacturer: Logitech [ 2.295247] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro [ 2.318790] systemd-udevd[353]: starting version 204 [ 2.333755] usb 6-1.3: new low-speed USB device number 5 using ohci-pci [ 2.366743] lp: driver loaded but no devices found [ 2.374738] ppdev: user-space parallel port driver [ 2.440794] usb 6-1.3: New USB device found, idVendor=10d5, idProduct=55a4 [ 2.440798] usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.440801] usb 6-1.3: Product: 4 Port KVMSwicther [ 2.440805] usb 6-1.3: Manufacturer: No brand [ 2.440807] usb 6-1.3: SerialNumber: 0\x14\xffffffc2\xffffff92\xffffff92 [ 2.509024] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem [ 2.510716] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null) [ 2.514479] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.556998] random: nonblocking pool is initialized [ 2.591197] [drm] Initialized drm 1.1.0 20060810 [ 2.620799] MCE: In-kernel MCE decoding enabled. [ 2.624045] EDAC MC: Ver: 3.0.0 [ 2.626560] AMD64 EDAC driver v3.4.0 [ 2.626606] EDAC amd64: DRAM ECC disabled. [ 2.626612] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 2.626612] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 2.626612] (Note that use of the override may cause unknown side effects.) [ 2.631840] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.632162] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.677277] audit: type=1400 audit(1455378496.996:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=467 comm="apparmor_parser" [ 2.677285] audit: type=1400 audit(1455378496.996:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=467 comm="apparmor_parser" [ 2.677290] audit: type=1400 audit(1455378496.996:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser" [ 2.677759] audit: type=1400 audit(1455378497.000:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=467 comm="apparmor_parser" [ 2.677766] audit: type=1400 audit(1455378497.000:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser" [ 2.677987] audit: type=1400 audit(1455378497.000:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser" [ 2.688795] hidraw: raw HID events driver (C) Jiri Kosina [ 2.689313] media: Linux media interface: v0.10 [ 2.702147] nvidia: module license 'NVIDIA' taints kernel. [ 2.702151] Disabling lock debugging due to kernel taint [ 2.709858] Linux video capture interface: v2.00 [ 2.714710] AVX version of gcm_enc/dec engaged. [ 2.714713] AES CTR mode by8 optimization enabled [ 2.723899] snd_hda_intel 0000:01:00.1: Disabling MSI [ 2.723957] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 2.723984] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 2.735477] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 2.736360] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 2.736372] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.96 Sun Nov 8 22:33:28 PST 2015 [ 2.745892] usb 3-3: 3:1: cannot get freq at ep 0x84 [ 2.757158] usb 3-3: Warning! Unlikely big volume range (=3328), cval->res is probably wrong. [ 2.757163] usb 3-3: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1 [ 2.757741] uvcvideo: Found UVC 1.00 device VF0415 Live! Cam Vid. IM Ultra (041e:4071) [ 2.757787] usbcore: registered new interface driver snd-usb-audio [ 2.765381] input: VF0415 Live! Cam Vid. IM Ultra as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3:1.0/input/input5 [ 2.765483] usbcore: registered new interface driver uvcvideo [ 2.765485] USB Video Class driver (1.1.1) [ 2.768889] usbhid 6-1.3:1.1: couldn't find an input interrupt endpoint [ 2.768952] usbcore: registered new interface driver usbhid [ 2.768954] usbhid: USB HID core driver [ 2.784848] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 2.784852] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.784855] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 2.784857] sound hdaudioC0D0: mono: mono_out=0x0 [ 2.784858] sound hdaudioC0D0: dig-out=0x1e/0x0 [ 2.784860] sound hdaudioC0D0: inputs: [ 2.784863] sound hdaudioC0D0: Front Mic=0x19 [ 2.784865] sound hdaudioC0D0: Rear Mic=0x18 [ 2.784867] sound hdaudioC0D0: Line=0x1a [ 2.796932] kvm: Nested Virtualization enabled [ 2.796937] kvm: Nested Paging enabled [ 2.801954] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 2.802081] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 2.802181] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 2.802296] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 2.802403] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 2.802513] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 2.802656] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 2.802771] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 2.866387] Switched to clocksource tsc [ 2.905820] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1.1/6-1.1:1.0/0003:04D9:1702.0001/input/input14 [ 2.924655] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1.2/input2 [ 2.962544] hid-generic 0003:04D9:1702.0001: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:12.0-1.1/input0 [ 2.967002] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1.1/6-1.1:1.1/0003:04D9:1702.0002/input/input15 [ 3.021772] hid-generic 0003:04D9:1702.0002: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:12.0-1.1/input1 [ 3.022771] input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1.3/6-1.3:1.0/0003:10D5:55A4.0006/input/input16 [ 3.088772] input: Logitech M325 as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:046D:C52B.0005/0003:046D:400A.0007/input/input17 [ 3.133842] hid-generic 0003:10D5:55A4.0006: input,hidraw3: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:12.0-1.3/input0 [ 3.138908] logitech-hidpp-device 0003:046D:400A.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:12.0-1.2:1 [ 3.510140] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input18 [ 3.510236] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input19 [ 3.510340] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input20 [ 3.510433] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input21 [ 3.750374] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 3.866372] init: failsafe main process (727) killed by TERM signal [ 3.976177] Bluetooth: Core ver 2.20 [ 3.976193] NET: Registered protocol family 31 [ 3.976194] Bluetooth: HCI device and connection manager initialized [ 3.976198] Bluetooth: HCI socket layer initialized [ 3.976201] Bluetooth: L2CAP socket layer initialized [ 3.976207] Bluetooth: SCO socket layer initialized [ 3.982300] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.982303] Bluetooth: BNEP filters: protocol multicast [ 3.982308] Bluetooth: BNEP socket layer initialized [ 3.984206] Bluetooth: RFCOMM TTY layer initialized [ 3.984212] Bluetooth: RFCOMM socket layer initialized [ 3.984217] Bluetooth: RFCOMM ver 1.11 [ 3.999307] audit: type=1400 audit(1455378498.317:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=841 comm="apparmor_parser" [ 3.999316] audit: type=1400 audit(1455378498.317:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=841 comm="apparmor_parser" [ 3.999924] audit: type=1400 audit(1455378498.317:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=841 comm="apparmor_parser" [ 4.027397] init: cups main process (868) killed by HUP signal [ 4.027409] init: cups main process ended, respawning [ 4.211486] r8169 0000:05:00.0 eth0: link down [ 4.211504] r8169 0000:05:00.0 eth0: link down [ 4.211529] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.545907] init: plymouth-upstart-bridge main process ended, respawning [ 6.689654] r8169 0000:05:00.0 eth0: link up [ 6.689664] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.150935] usb 3-3: 3:1: cannot get freq at ep 0x84 [ 8.174057] usb 3-3: 3:1: cannot get freq at ep 0x84 [ 8.210166] usb 3-3: 3:1: cannot get freq at ep 0x84 [ 8.233323] usb 3-3: 3:1: cannot get freq at ep 0x84 [ 8.238239] retire_capture_urb: 165 callbacks suppressed [ 34.076891] audit: type=1400 audit(1455378535.504:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1926 comm="apparmor_parser" [ 34.076900] audit: type=1400 audit(1455378535.504:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1926 comm="apparmor_parser" [ 34.077380] audit: type=1400 audit(1455378535.504:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1926 comm="apparmor_parser" [ 47.214852] usb 3-3: 3:1: cannot get freq at ep 0x84 [ 47.237848] usb 3-3: 3:1: cannot get freq at ep 0x84 [ 47.270958] usb 3-3: 3:1: cannot get freq at ep 0x84 [ 47.294075] usb 3-3: 3:1: cannot get freq at ep 0x84 [51555.685989] systemd-hostnamed[26838]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [51667.210607] ata4: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen [51667.210616] ata4: irq_stat 0x00400000, PHY RDY changed [51667.210622] ata4: SError: { RecovComm Persist PHYRdyChg 10B8B } [51667.210630] ata4: hard resetting link [51676.510118] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [51676.510292] ata4.00: supports DRM functions and may not be fully accessible [51676.510412] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51676.510674] ata4.00: supports DRM functions and may not be fully accessible [51676.510754] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51676.510820] ata4.00: configured for UDMA/133 [51676.530030] ata4: EH complete [51680.565737] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0202 action 0xe frozen [51680.565744] ata4: irq_stat 0x00000040, connection status changed [51680.565749] ata4: SError: { RecovComm Persist CommWake 10B8B DevExch } [51680.565755] ata4: hard resetting link [51689.659297] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [51689.659589] ata4.00: supports DRM functions and may not be fully accessible [51689.659685] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51689.659940] ata4.00: supports DRM functions and may not be fully accessible [51689.660025] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51689.660093] ata4.00: configured for UDMA/133 [51689.675301] ata4: EH complete [51691.667692] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0202 action 0xe frozen [51691.667701] ata4: irq_stat 0x00000040, connection status changed [51691.667707] ata4: SError: { RecovComm Persist CommWake 10B8B DevExch } [51691.667715] ata4: hard resetting link [51700.724951] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [51700.725130] ata4.00: supports DRM functions and may not be fully accessible [51700.725221] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51700.725453] ata4.00: supports DRM functions and may not be fully accessible [51700.725531] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51700.725595] ata4.00: configured for UDMA/133 [51700.740903] ata4: EH complete [51702.748757] ata4: limiting SATA link speed to 3.0 Gbps [51702.748768] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0202 action 0xe frozen [51702.748773] ata4: irq_stat 0x00000040, connection status changed [51702.748778] ata4: SError: { RecovComm Persist CommWake 10B8B DevExch } [51702.748786] ata4: hard resetting link [51711.802596] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [51711.805188] ata4.00: supports DRM functions and may not be fully accessible [51711.805284] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51711.805629] ata4.00: supports DRM functions and may not be fully accessible [51711.805710] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51711.805778] ata4.00: configured for UDMA/133 [51711.818587] ata4: EH complete [51713.836906] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0202 action 0xe frozen [51713.836914] ata4: irq_stat 0x00000040, connection status changed [51713.836920] ata4: SError: { RecovComm Persist CommWake 10B8B DevExch } [51713.836928] ata4: hard resetting link [51722.904227] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [51722.904405] ata4.00: supports DRM functions and may not be fully accessible [51722.904483] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51722.904706] ata4.00: supports DRM functions and may not be fully accessible [51722.904776] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51722.904834] ata4.00: configured for UDMA/133 [51722.920234] ata4: EH complete [51725.359787] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0202 action 0xe frozen [51725.359792] ata4: irq_stat 0x00000040, connection status changed [51725.359795] ata4: SError: { RecovComm Persist CommWake 10B8B DevExch } [51725.359798] ata4: hard resetting link [51734.397842] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [51734.398025] ata4.00: supports DRM functions and may not be fully accessible [51734.398115] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51734.398360] ata4.00: supports DRM functions and may not be fully accessible [51734.398460] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51734.398524] ata4.00: configured for UDMA/133 [51734.413792] ata4: EH complete [51736.959235] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0202 action 0xe frozen [51736.959244] ata4: irq_stat 0x00000040, connection status changed [51736.959250] ata4: SError: { RecovComm Persist CommWake 10B8B DevExch } [51736.959259] ata4: hard resetting link [51745.971375] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [51745.971579] ata4.00: supports DRM functions and may not be fully accessible [51745.971676] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51745.971920] ata4.00: supports DRM functions and may not be fully accessible [51745.972000] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51745.972067] ata4.00: configured for UDMA/133 [51745.987311] ata4: EH complete [51766.906401] ata4: limiting SATA link speed to 1.5 Gbps [51766.906410] ata4: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen [51766.906414] ata4: irq_stat 0x00400000, PHY RDY changed [51766.906418] ata4: SError: { RecovComm Persist PHYRdyChg 10B8B } [51766.906424] ata4: hard resetting link [51775.972926] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51775.973124] ata4.00: supports DRM functions and may not be fully accessible [51775.973226] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51775.973486] ata4.00: supports DRM functions and may not be fully accessible [51775.973568] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51775.973645] ata4.00: configured for UDMA/133 [51775.988922] ata4: EH complete [51791.108034] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [51791.108043] ata4: irq_stat 0x00400000, PHY RDY changed [51791.108048] ata4: SError: { Persist PHYRdyChg } [51791.108056] ata4: hard resetting link [51800.183833] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51800.184026] ata4.00: supports DRM functions and may not be fully accessible [51800.184128] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51800.184418] ata4.00: supports DRM functions and may not be fully accessible [51800.184509] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51800.184582] ata4.00: configured for UDMA/133 [51800.199697] ata4: EH complete [51802.163162] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [51802.163171] ata4: irq_stat 0x00000040, connection status changed [51802.163177] ata4: SError: { Persist CommWake 10B8B DevExch } [51802.163185] ata4: hard resetting link [51811.173493] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51811.174492] ata4.00: supports DRM functions and may not be fully accessible [51811.174600] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51811.174914] ata4.00: supports DRM functions and may not be fully accessible [51811.174985] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51811.175051] ata4.00: configured for UDMA/133 [51811.189419] ata4: EH complete [51826.911171] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [51826.911179] ata4: irq_stat 0x00400000, PHY RDY changed [51826.911185] ata4: SError: { Persist PHYRdyChg } [51826.911194] ata4: hard resetting link [51835.980140] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51835.980411] ata4.00: supports DRM functions and may not be fully accessible [51835.980514] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51835.980796] ata4.00: supports DRM functions and may not be fully accessible [51835.980884] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51835.980946] ata4.00: configured for UDMA/133 [51835.996161] ata4: EH complete [51851.199243] ata4.00: limiting speed to UDMA/100:PIO4 [51851.199253] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [51851.199258] ata4: irq_stat 0x00400000, PHY RDY changed [51851.199263] ata4: SError: { Persist PHYRdyChg } [51851.199271] ata4: hard resetting link [51860.330962] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51860.331239] ata4.00: supports DRM functions and may not be fully accessible [51860.331334] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51860.331587] ata4.00: supports DRM functions and may not be fully accessible [51860.331658] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51860.331720] ata4.00: configured for UDMA/100 [51860.346955] ata4: EH complete [51862.284070] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen [51862.284078] ata4: irq_stat 0x00000040, connection status changed [51862.284085] ata4: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch } [51862.284093] ata4: hard resetting link [51871.352618] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51871.352790] ata4.00: supports DRM functions and may not be fully accessible [51871.352874] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51871.353113] ata4.00: supports DRM functions and may not be fully accessible [51871.353207] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51871.353272] ata4.00: configured for UDMA/100 [51871.368643] ata4: EH complete [51886.910501] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [51886.910507] ata4: irq_stat 0x00400000, PHY RDY changed [51886.910510] ata4: SError: { Persist PHYRdyChg } [51886.910515] ata4: hard resetting link [51896.107273] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51896.107542] ata4.00: supports DRM functions and may not be fully accessible [51896.107647] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51896.107929] ata4.00: supports DRM functions and may not be fully accessible [51896.108014] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51896.108087] ata4.00: configured for UDMA/100 [51896.127360] ata4: EH complete [51898.103939] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [51898.103947] ata4: irq_stat 0x00000040, connection status changed [51898.103953] ata4: SError: { Persist CommWake 10B8B DevExch } [51898.103962] ata4: hard resetting link [51907.172981] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51907.173177] ata4.00: supports DRM functions and may not be fully accessible [51907.173275] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51907.173547] ata4.00: supports DRM functions and may not be fully accessible [51907.173634] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51907.173707] ata4.00: configured for UDMA/100 [51907.188999] ata4: EH complete [51911.127231] ata4.00: limiting speed to UDMA/33:PIO4 [51911.127242] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [51911.127247] ata4: irq_stat 0x00000040, connection status changed [51911.127252] ata4: SError: { Persist CommWake 10B8B DevExch } [51911.127260] ata4: hard resetting link [51920.150229] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51920.155025] ata4.00: supports DRM functions and may not be fully accessible [51920.155126] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51920.155410] ata4.00: supports DRM functions and may not be fully accessible [51920.155495] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51920.155568] ata4.00: configured for UDMA/33 [51920.170229] ata4: EH complete [51922.185026] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [51922.185033] ata4: irq_stat 0x00000040, connection status changed [51922.185038] ata4: SError: { Persist CommWake 10B8B DevExch } [51922.185044] ata4: hard resetting link [51931.255798] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51931.255983] ata4.00: supports DRM functions and may not be fully accessible [51931.256098] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51931.256377] ata4.00: supports DRM functions and may not be fully accessible [51931.256472] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51931.256555] ata4.00: configured for UDMA/33 [51931.271789] ata4: EH complete [51946.895853] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [51946.895857] ata4: irq_stat 0x00400000, PHY RDY changed [51946.895860] ata4: SError: { Persist PHYRdyChg } [51946.895864] ata4: hard resetting link [51955.478701] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51955.478887] ata4.00: supports DRM functions and may not be fully accessible [51955.478993] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51955.479275] ata4.00: supports DRM functions and may not be fully accessible [51955.479363] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51955.479444] ata4.00: configured for UDMA/33 [51955.494626] ata4: EH complete [51957.432714] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [51957.432723] ata4: irq_stat 0x00000040, connection status changed [51957.432752] ata4: SError: { Persist CommWake 10B8B DevExch } [51957.432761] ata4: hard resetting link [51965.940536] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51965.940735] ata4.00: supports DRM functions and may not be fully accessible [51965.940826] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51965.941060] ata4.00: supports DRM functions and may not be fully accessible [51965.941132] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51965.941195] ata4.00: configured for UDMA/33 [51965.956476] ata4: EH complete [51972.110645] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen [51972.110654] ata4: irq_stat 0x00000040, connection status changed [51972.110660] ata4: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch } [51972.110668] ata4: hard resetting link [51980.597344] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51980.597549] ata4.00: supports DRM functions and may not be fully accessible [51980.597655] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51980.597924] ata4.00: supports DRM functions and may not be fully accessible [51980.598016] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51980.598092] ata4.00: configured for UDMA/33 [51980.613305] ata4: EH complete [51982.624362] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [51982.624368] ata4: irq_stat 0x00000040, connection status changed [51982.624373] ata4: SError: { Persist CommWake 10B8B DevExch } [51982.624379] ata4: hard resetting link [51991.186996] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [51991.187153] ata4.00: supports DRM functions and may not be fully accessible [51991.187258] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51991.187512] ata4.00: supports DRM functions and may not be fully accessible [51991.187585] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [51991.187650] ata4.00: configured for UDMA/33 [51991.203023] ata4: EH complete [52001.104266] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [52001.104274] ata4: irq_stat 0x00000040, connection status changed [52001.104281] ata4: SError: { Persist CommWake 10B8B DevExch } [52001.104289] ata4: hard resetting link [52009.511192] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [52009.511358] ata4.00: supports DRM functions and may not be fully accessible [52009.511443] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [52009.511686] ata4.00: supports DRM functions and may not be fully accessible [52009.511762] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [52009.511828] ata4.00: configured for UDMA/33 [52009.531115] ata4: EH complete [57065.082193] systemd-hostnamed[19260]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [76175.715832] audit: type=1400 audit(1455454693.354:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2729 comm="apparmor_parser" [76175.715842] audit: type=1400 audit(1455454693.354:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2729 comm="apparmor_parser" [76175.716183] audit: type=1400 audit(1455454693.354:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2729 comm="apparmor_parser" [98591.829517] systemd-hostnamed[31125]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [98734.720860] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [98734.720868] ata4: irq_stat 0x00400000, PHY RDY changed [98734.720874] ata4: SError: { Persist PHYRdyChg } [98734.720882] ata4: hard resetting link [98742.335610] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98742.335784] ata4.00: supports DRM functions and may not be fully accessible [98742.335867] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98742.336139] ata4.00: supports DRM functions and may not be fully accessible [98742.336213] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98742.336278] ata4.00: configured for UDMA/33 [98742.351579] ata4: EH complete [98744.330144] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98744.330153] ata4: irq_stat 0x00000040, connection status changed [98744.330159] ata4: SError: { Persist CommWake 10B8B DevExch } [98744.330167] ata4: hard resetting link [98751.893655] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98751.893847] ata4.00: supports DRM functions and may not be fully accessible [98751.893947] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98751.894237] ata4.00: supports DRM functions and may not be fully accessible [98751.894330] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98751.894403] ata4.00: configured for UDMA/33 [98751.909643] ata4: EH complete [98758.894436] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98758.894445] ata4: irq_stat 0x00000040, connection status changed [98758.894451] ata4: SError: { Persist CommWake 10B8B DevExch } [98758.894460] ata4: hard resetting link [98766.742481] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98766.742675] ata4.00: supports DRM functions and may not be fully accessible [98766.742777] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98766.743051] ata4.00: supports DRM functions and may not be fully accessible [98766.743146] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98766.743210] ata4.00: configured for UDMA/33 [98766.758486] ata4: EH complete [98768.748369] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98768.748378] ata4: irq_stat 0x00000040, connection status changed [98768.748384] ata4: SError: { Persist CommWake 10B8B DevExch } [98768.748392] ata4: hard resetting link [98776.584391] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98776.584568] ata4.00: supports DRM functions and may not be fully accessible [98776.584660] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98776.584934] ata4.00: supports DRM functions and may not be fully accessible [98776.585016] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98776.585086] ata4.00: configured for UDMA/33 [98776.604396] ata4: EH complete [98778.577561] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98778.577569] ata4: irq_stat 0x00000040, connection status changed [98778.577575] ata4: SError: { Persist CommWake 10B8B DevExch } [98778.577583] ata4: hard resetting link [98786.414289] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98786.414504] ata4.00: supports DRM functions and may not be fully accessible [98786.414615] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98786.414902] ata4.00: supports DRM functions and may not be fully accessible [98786.415002] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98786.415083] ata4.00: configured for UDMA/33 [98786.430308] ata4: EH complete [98788.406891] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98788.406899] ata4: irq_stat 0x00000040, connection status changed [98788.406905] ata4: SError: { Persist CommWake 10B8B DevExch } [98788.406913] ata4: hard resetting link [98796.160169] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98796.160368] ata4.00: supports DRM functions and may not be fully accessible [98796.160472] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98796.160741] ata4.00: supports DRM functions and may not be fully accessible [98796.160819] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98796.160884] ata4.00: configured for UDMA/33 [98796.176229] ata4: EH complete [98798.157696] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98798.157706] ata4: irq_stat 0x00000040, connection status changed [98798.157714] ata4: SError: { Persist CommWake 10B8B DevExch } [98798.157723] ata4: hard resetting link [98805.938194] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98805.938398] ata4.00: supports DRM functions and may not be fully accessible [98805.938493] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98805.938751] ata4.00: supports DRM functions and may not be fully accessible [98805.938832] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98805.938901] ata4.00: configured for UDMA/33 [98805.954135] ata4: EH complete [98821.181542] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [98821.181550] ata4: irq_stat 0x00400000, PHY RDY changed [98821.181556] ata4: SError: { Persist PHYRdyChg } [98821.181564] ata4: hard resetting link [98829.025221] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98829.025391] ata4.00: supports DRM functions and may not be fully accessible [98829.025482] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98829.025712] ata4.00: supports DRM functions and may not be fully accessible [98829.025785] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98829.025848] ata4.00: configured for UDMA/33 [98829.041159] ata4: EH complete [98830.996174] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98830.996182] ata4: irq_stat 0x00000040, connection status changed [98830.996188] ata4: SError: { Persist CommWake 10B8B DevExch } [98830.996196] ata4: hard resetting link [98838.775136] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98838.775334] ata4.00: supports DRM functions and may not be fully accessible [98838.775433] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98838.775707] ata4.00: supports DRM functions and may not be fully accessible [98838.775794] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98838.775867] ata4.00: configured for UDMA/33 [98838.791153] ata4: EH complete [98856.875320] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [98856.875329] ata4: irq_stat 0x00400000, PHY RDY changed [98856.875335] ata4: SError: { Persist PHYRdyChg } [98856.875343] ata4: hard resetting link [98864.905499] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98864.905695] ata4.00: supports DRM functions and may not be fully accessible [98864.905787] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98864.906040] ata4.00: supports DRM functions and may not be fully accessible [98864.906119] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98864.906188] ata4.00: configured for UDMA/33 [98864.921591] ata4: EH complete [98866.904871] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98866.904882] ata4: irq_stat 0x00000040, connection status changed [98866.904890] ata4: SError: { Persist CommWake 10B8B DevExch } [98866.904901] ata4: hard resetting link [98874.911441] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98874.911610] ata4.00: supports DRM functions and may not be fully accessible [98874.911693] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98874.912012] ata4.00: supports DRM functions and may not be fully accessible [98874.912086] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98874.912151] ata4.00: configured for UDMA/33 [98874.927447] ata4: EH complete [98881.123482] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98881.123491] ata4: irq_stat 0x00000040, connection status changed [98881.123497] ata4: SError: { Persist CommWake 10B8B DevExch } [98881.123505] ata4: hard resetting link [98889.080422] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98889.086324] ata4.00: supports DRM functions and may not be fully accessible [98889.086442] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98889.086771] ata4.00: supports DRM functions and may not be fully accessible [98889.086840] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98889.086907] ata4.00: configured for UDMA/33 [98889.104421] ata4: EH complete [98891.117262] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98891.117270] ata4: irq_stat 0x00000040, connection status changed [98891.117276] ata4: SError: { Persist CommWake 10B8B DevExch } [98891.117285] ata4: hard resetting link [98899.066230] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98899.066421] ata4.00: supports DRM functions and may not be fully accessible [98899.066519] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98899.066780] ata4.00: supports DRM functions and may not be fully accessible [98899.066860] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98899.066931] ata4.00: configured for UDMA/33 [98899.082282] ata4: EH complete [98916.850241] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [98916.850250] ata4: irq_stat 0x00400000, PHY RDY changed [98916.850256] ata4: SError: { Persist PHYRdyChg } [98916.850264] ata4: hard resetting link [98925.584681] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98925.584879] ata4.00: supports DRM functions and may not be fully accessible [98925.584979] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98925.585210] ata4.00: supports DRM functions and may not be fully accessible [98925.585284] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98925.585348] ata4.00: configured for UDMA/33 [98925.600657] ata4: EH complete [98927.559860] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98927.559869] ata4: irq_stat 0x00000040, connection status changed [98927.559875] ata4: SError: { Persist CommWake 10B8B DevExch } [98927.559883] ata4: hard resetting link [98936.234451] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98936.234627] ata4.00: supports DRM functions and may not be fully accessible [98936.234716] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98936.234967] ata4.00: supports DRM functions and may not be fully accessible [98936.235042] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98936.235111] ata4.00: configured for UDMA/33 [98936.250327] ata4: EH complete [98946.854623] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [98946.854632] ata4: irq_stat 0x00400000, PHY RDY changed [98946.854638] ata4: SError: { Persist PHYRdyChg } [98946.854646] ata4: hard resetting link [98955.586195] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98955.586372] ata4.00: supports DRM functions and may not be fully accessible [98955.586508] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98955.586777] ata4.00: supports DRM functions and may not be fully accessible [98955.586856] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98955.586923] ata4.00: configured for UDMA/33 [98955.606269] ata4: EH complete [98971.082996] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [98971.083000] ata4: irq_stat 0x00400000, PHY RDY changed [98971.083003] ata4: SError: { Persist PHYRdyChg } [98971.083008] ata4: hard resetting link [98979.785109] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98979.785294] ata4.00: supports DRM functions and may not be fully accessible [98979.785388] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98979.785645] ata4.00: supports DRM functions and may not be fully accessible [98979.785731] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98979.785803] ata4.00: configured for UDMA/33 [98979.801118] ata4: EH complete [98981.779991] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [98981.780000] ata4: irq_stat 0x00000040, connection status changed [98981.780006] ata4: SError: { Persist CommWake 10B8B DevExch } [98981.780014] ata4: hard resetting link [98990.510892] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [98990.511094] ata4.00: supports DRM functions and may not be fully accessible [98990.511204] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98990.511474] ata4.00: supports DRM functions and may not be fully accessible [98990.511562] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [98990.511634] ata4.00: configured for UDMA/33 [98990.526833] ata4: EH complete [99001.074697] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [99001.074703] ata4: irq_stat 0x00400000, PHY RDY changed [99001.074706] ata4: SError: { Persist PHYRdyChg } [99001.074711] ata4: hard resetting link [99009.810653] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [99009.810857] ata4.00: supports DRM functions and may not be fully accessible [99009.810956] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [99009.811230] ata4.00: supports DRM functions and may not be fully accessible [99009.811322] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [99009.811397] ata4.00: configured for UDMA/33 [99009.826722] ata4: EH complete [99011.776293] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [99011.776301] ata4: irq_stat 0x00000040, connection status changed [99011.776307] ata4: SError: { Persist CommWake 10B8B DevExch } [99011.776315] ata4: hard resetting link [99020.452519] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [99020.452711] ata4.00: supports DRM functions and may not be fully accessible [99020.452806] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [99020.453062] ata4.00: supports DRM functions and may not be fully accessible [99020.453143] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [99020.453212] ata4.00: configured for UDMA/33 [99020.468445] ata4: EH complete [99036.842948] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [99036.842954] ata4: irq_stat 0x00400000, PHY RDY changed [99036.842959] ata4: SError: { Persist PHYRdyChg } [99036.842965] ata4: hard resetting link [99046.066992] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [99046.067197] ata4.00: supports DRM functions and may not be fully accessible [99046.067289] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [99046.067553] ata4.00: supports DRM functions and may not be fully accessible [99046.067637] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [99046.067709] ata4.00: configured for UDMA/33 [99046.082977] ata4: EH complete [99048.049726] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [99048.049734] ata4: irq_stat 0x00000040, connection status changed [99048.049740] ata4: SError: { Persist CommWake 10B8B DevExch } [99048.049748] ata4: hard resetting link [99057.228686] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [99057.228885] ata4.00: supports DRM functions and may not be fully accessible [99057.228973] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [99057.229219] ata4.00: supports DRM functions and may not be fully accessible [99057.229294] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [99057.229359] ata4.00: configured for UDMA/33 [99057.244624] ata4: EH complete [132983.259034] systemd-hostnamed[13044]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [133137.580240] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [133137.580249] ata4: irq_stat 0x00400000, PHY RDY changed [133137.580254] ata4: SError: { Persist PHYRdyChg } [133137.580262] ata4: hard resetting link [133146.217454] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133146.217629] ata4.00: supports DRM functions and may not be fully accessible [133146.217723] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133146.217969] ata4.00: supports DRM functions and may not be fully accessible [133146.218047] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133146.218117] ata4.00: configured for UDMA/33 [133146.233474] ata4: EH complete [133149.183193] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133149.183197] ata4: irq_stat 0x00000040, connection status changed [133149.183199] ata4: SError: { Persist CommWake 10B8B DevExch } [133149.183203] ata4: hard resetting link [133157.715086] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133157.718585] ata4.00: supports DRM functions and may not be fully accessible [133157.718718] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133157.718995] ata4.00: supports DRM functions and may not be fully accessible [133157.719095] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133157.719173] ata4.00: configured for UDMA/33 [133157.735073] ata4: EH complete [133162.798037] ata4.00: exception Emask 0x10 SAct 0x2 SErr 0x40d0202 action 0xe frozen [133162.798047] ata4.00: irq_stat 0x00000040, connection status changed [133162.798053] ata4: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch } [133162.798059] ata4.00: failed command: WRITE FPDMA QUEUED [133162.798069] ata4.00: cmd 61/08:08:48:f9:da/00:00:73:00:00/40 tag 1 ncq 4096 out [133162.798069] res 40/00:00:c0:d7:d6/00:00:1f:00:00/40 Emask 0x10 (ATA bus error) [133162.798074] ata4.00: status: { DRDY } [133162.798082] ata4: hard resetting link [133171.364264] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133171.364448] ata4.00: supports DRM functions and may not be fully accessible [133171.364555] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133171.364814] ata4.00: supports DRM functions and may not be fully accessible [133171.364899] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133171.364977] ata4.00: configured for UDMA/33 [133171.380202] ata4: EH complete [133173.386565] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133173.386574] ata4: irq_stat 0x00000040, connection status changed [133173.386580] ata4: SError: { Persist CommWake 10B8B DevExch } [133173.386588] ata4: hard resetting link [133181.949941] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133181.950118] ata4.00: supports DRM functions and may not be fully accessible [133181.950208] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133181.950481] ata4.00: supports DRM functions and may not be fully accessible [133181.950561] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133181.950630] ata4.00: configured for UDMA/33 [133181.965936] ata4: EH complete [133191.398551] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133191.398560] ata4: irq_stat 0x00000040, connection status changed [133191.398567] ata4: SError: { Persist CommWake 10B8B DevExch } [133191.398575] ata4: hard resetting link [133199.974095] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133199.974371] ata4.00: supports DRM functions and may not be fully accessible [133199.974466] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133199.974728] ata4.00: supports DRM functions and may not be fully accessible [133199.974807] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133199.974877] ata4.00: configured for UDMA/33 [133199.990036] ata4: EH complete [133201.958444] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133201.958452] ata4: irq_stat 0x00000040, connection status changed [133201.958459] ata4: SError: { Persist CommWake 10B8B DevExch } [133201.958467] ata4: hard resetting link [133210.523927] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133210.524099] ata4.00: supports DRM functions and may not be fully accessible [133210.524187] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133210.524422] ata4.00: supports DRM functions and may not be fully accessible [133210.524494] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133210.524561] ata4.00: configured for UDMA/33 [133210.539851] ata4: EH complete [133229.582954] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [133229.582963] ata4: irq_stat 0x00400000, PHY RDY changed [133229.582970] ata4: SError: { Persist PHYRdyChg } [133229.582980] ata4: hard resetting link [133238.134039] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133238.134210] ata4.00: supports DRM functions and may not be fully accessible [133238.134291] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133238.134536] ata4.00: supports DRM functions and may not be fully accessible [133238.134610] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133238.134674] ata4.00: configured for UDMA/33 [133238.153999] ata4: EH complete [133241.038683] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133241.038692] ata4: irq_stat 0x00000040, connection status changed [133241.038698] ata4: SError: { Persist CommWake 10B8B DevExch } [133241.038707] ata4: hard resetting link [133249.499563] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133249.503782] ata4.00: supports DRM functions and may not be fully accessible [133249.503884] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133249.504132] ata4.00: supports DRM functions and may not be fully accessible [133249.504216] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133249.504287] ata4.00: configured for UDMA/33 [133249.519465] ata4: EH complete [133251.534672] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133251.534680] ata4: irq_stat 0x00000040, connection status changed [133251.534686] ata4: SError: { Persist CommWake 10B8B DevExch } [133251.534694] ata4: hard resetting link [133260.013383] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133260.013579] ata4.00: supports DRM functions and may not be fully accessible [133260.013674] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133260.013904] ata4.00: supports DRM functions and may not be fully accessible [133260.013989] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133260.014052] ata4.00: configured for UDMA/33 [133260.033328] ata4: EH complete [133262.023683] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133262.023688] ata4: irq_stat 0x00000040, connection status changed [133262.023691] ata4: SError: { Persist CommWake 10B8B DevExch } [133262.023696] ata4: hard resetting link [133270.543069] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133270.543268] ata4.00: supports DRM functions and may not be fully accessible [133270.543373] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133270.543650] ata4.00: supports DRM functions and may not be fully accessible [133270.543736] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133270.543814] ata4.00: configured for UDMA/33 [133270.559063] ata4: EH complete [133272.572142] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133272.572150] ata4: irq_stat 0x00000040, connection status changed [133272.572155] ata4: SError: { Persist CommWake 10B8B DevExch } [133272.572161] ata4: hard resetting link [133281.040844] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133281.041054] ata4.00: supports DRM functions and may not be fully accessible [133281.041151] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133281.041417] ata4.00: supports DRM functions and may not be fully accessible [133281.041501] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133281.041571] ata4.00: configured for UDMA/33 [133281.056840] ata4: EH complete [133288.061385] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133288.061394] ata4: irq_stat 0x00000040, connection status changed [133288.061400] ata4: SError: { Persist CommWake 10B8B DevExch } [133288.061409] ata4: hard resetting link [133296.853463] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133296.853658] ata4.00: supports DRM functions and may not be fully accessible [133296.853765] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133296.853998] ata4.00: supports DRM functions and may not be fully accessible [133296.854067] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133296.854129] ata4.00: configured for UDMA/33 [133296.869395] ata4: EH complete [133298.844379] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133298.844388] ata4: irq_stat 0x00000040, connection status changed [133298.844394] ata4: SError: { Persist CommWake 10B8B DevExch } [133298.844402] ata4: hard resetting link [133307.579180] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133307.579361] ata4.00: supports DRM functions and may not be fully accessible [133307.579452] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133307.579707] ata4.00: supports DRM functions and may not be fully accessible [133307.579784] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133307.579853] ata4.00: configured for UDMA/33 [133307.595188] ata4: EH complete [133319.557951] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [133319.557958] ata4: irq_stat 0x00400000, PHY RDY changed [133319.557963] ata4: SError: { Persist PHYRdyChg } [133319.557970] ata4: hard resetting link [133328.294791] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133328.295012] ata4.00: supports DRM functions and may not be fully accessible [133328.295113] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133328.295386] ata4.00: supports DRM functions and may not be fully accessible [133328.295481] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133328.295555] ata4.00: configured for UDMA/33 [133328.310770] ata4: EH complete [133330.275652] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133330.275661] ata4: irq_stat 0x00000040, connection status changed [133330.275667] ata4: SError: { Persist CommWake 10B8B DevExch } [133330.275675] ata4: hard resetting link [133338.896582] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133338.902373] ata4.00: supports DRM functions and may not be fully accessible [133338.902470] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133338.902712] ata4.00: supports DRM functions and may not be fully accessible [133338.902798] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133338.902865] ata4.00: configured for UDMA/33 [133338.916538] ata4: EH complete [133349.525608] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [133349.525616] ata4: irq_stat 0x00400000, PHY RDY changed [133349.525622] ata4: SError: { Persist PHYRdyChg } [133349.525630] ata4: hard resetting link [133358.144402] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133358.145750] ata4.00: supports DRM functions and may not be fully accessible [133358.145831] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133358.146061] ata4.00: supports DRM functions and may not be fully accessible [133358.146130] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133358.146193] ata4.00: configured for UDMA/33 [133358.160345] ata4: EH complete [133373.732165] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [133373.732174] ata4: irq_stat 0x00400000, PHY RDY changed [133373.732180] ata4: SError: { Persist PHYRdyChg } [133373.732188] ata4: hard resetting link [133382.363328] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133382.363531] ata4.00: supports DRM functions and may not be fully accessible [133382.363634] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133382.363897] ata4.00: supports DRM functions and may not be fully accessible [133382.363990] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133382.364064] ata4.00: configured for UDMA/33 [133382.379191] ata4: EH complete [133384.356372] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [133384.356381] ata4: irq_stat 0x00000040, connection status changed [133384.356387] ata4: SError: { Persist CommWake 10B8B DevExch } [133384.356395] ata4: hard resetting link [133392.977065] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133392.977271] ata4.00: supports DRM functions and may not be fully accessible [133392.977382] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133392.977662] ata4.00: supports DRM functions and may not be fully accessible [133392.977750] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133392.977831] ata4.00: configured for UDMA/33 [133392.993002] ata4: EH complete [133409.503982] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [133409.503991] ata4: irq_stat 0x00400000, PHY RDY changed [133409.503997] ata4: SError: { Persist PHYRdyChg } [133409.504004] ata4: hard resetting link [133417.955681] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133417.955863] ata4.00: supports DRM functions and may not be fully accessible [133417.955960] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133417.956223] ata4.00: supports DRM functions and may not be fully accessible [133417.956305] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133417.956372] ata4.00: configured for UDMA/33 [133417.971666] ata4: EH complete [133433.717339] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [133433.717347] ata4: irq_stat 0x00400000, PHY RDY changed [133433.717353] ata4: SError: { Persist PHYRdyChg } [133433.717361] ata4: hard resetting link [133442.130536] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133442.131422] ata4.00: supports DRM functions and may not be fully accessible [133442.131520] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133442.131873] ata4.00: supports DRM functions and may not be fully accessible [133442.131952] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133442.132021] ata4.00: configured for UDMA/33 [133442.146459] ata4: EH complete [133444.131996] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0202 action 0xe frozen [133444.132003] ata4: irq_stat 0x00000040, connection status changed [133444.132008] ata4: SError: { RecovComm Persist CommWake 10B8B DevExch } [133444.132015] ata4: hard resetting link [133452.528382] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133452.528583] ata4.00: supports DRM functions and may not be fully accessible [133452.528680] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133452.528960] ata4.00: supports DRM functions and may not be fully accessible [133452.529043] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [133452.529117] ata4.00: configured for UDMA/33 [133452.544255] ata4: EH complete [134002.669983] systemd-hostnamed[17428]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [134039.898732] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [134039.898739] ata4: irq_stat 0x00400000, PHY RDY changed [134039.898743] ata4: SError: { Persist PHYRdyChg } [134039.898750] ata4: hard resetting link [134049.049206] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134049.049386] ata4.00: supports DRM functions and may not be fully accessible [134049.049475] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134049.049730] ata4.00: supports DRM functions and may not be fully accessible [134049.049817] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134049.049894] ata4.00: configured for UDMA/33 [134049.065209] ata4: EH complete [134086.362888] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [134086.362897] ata4: irq_stat 0x00400000, PHY RDY changed [134086.362903] ata4: SError: { Persist PHYRdyChg } [134086.362911] ata4: hard resetting link [134096.031222] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134096.031414] ata4.00: supports DRM functions and may not be fully accessible [134096.031512] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134096.031786] ata4.00: supports DRM functions and may not be fully accessible [134096.031870] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134096.031943] ata4.00: configured for UDMA/33 [134096.051221] ata4: EH complete [134098.451341] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134098.451348] ata4: irq_stat 0x00000040, connection status changed [134098.451353] ata4: SError: { Persist CommWake 10B8B DevExch } [134098.451360] ata4: hard resetting link [134108.040730] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134108.040910] ata4.00: supports DRM functions and may not be fully accessible [134108.040999] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134108.041274] ata4.00: supports DRM functions and may not be fully accessible [134108.041357] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134108.041426] ata4.00: configured for UDMA/33 [134108.056654] ata4: EH complete [134114.794636] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134114.794644] ata4: irq_stat 0x00000040, connection status changed [134114.794650] ata4: SError: { Persist CommWake 10B8B DevExch } [134114.794659] ata4: hard resetting link [134124.713118] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134124.713275] ata4.00: supports DRM functions and may not be fully accessible [134124.713354] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134124.713588] ata4.00: supports DRM functions and may not be fully accessible [134124.713661] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134124.713725] ata4.00: configured for UDMA/33 [134124.733177] ata4: EH complete [134126.730435] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134126.730445] ata4: irq_stat 0x00000040, connection status changed [134126.730451] ata4: SError: { Persist CommWake 10B8B DevExch } [134126.730459] ata4: hard resetting link [134136.614556] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134136.616818] ata4.00: supports DRM functions and may not be fully accessible [134136.617162] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134136.617414] ata4.00: supports DRM functions and may not be fully accessible [134136.617492] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134136.617558] ata4.00: configured for UDMA/33 [134136.630642] ata4: EH complete [134138.814978] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134138.814985] ata4: irq_stat 0x00000040, connection status changed [134138.814991] ata4: SError: { Persist CommWake 10B8B DevExch } [134138.814997] ata4: hard resetting link [134148.747972] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134148.748151] ata4.00: supports DRM functions and may not be fully accessible [134148.748239] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134148.748485] ata4.00: supports DRM functions and may not be fully accessible [134148.748565] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134148.748634] ata4.00: configured for UDMA/33 [134148.763989] ata4: EH complete [134154.805638] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134154.805647] ata4: irq_stat 0x00000040, connection status changed [134154.805653] ata4: SError: { Persist CommWake 10B8B DevExch } [134154.805661] ata4: hard resetting link [134164.840563] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134164.840721] ata4.00: supports DRM functions and may not be fully accessible [134164.840805] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134164.841037] ata4.00: supports DRM functions and may not be fully accessible [134164.841111] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134164.841176] ata4.00: configured for UDMA/33 [134164.856548] ata4: EH complete [134167.756437] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134167.756445] ata4: irq_stat 0x00000040, connection status changed [134167.756451] ata4: SError: { Persist CommWake 10B8B DevExch } [134167.756460] ata4: hard resetting link [134177.753811] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134177.757229] ata4.00: supports DRM functions and may not be fully accessible [134177.757322] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134177.757658] ata4.00: supports DRM functions and may not be fully accessible [134177.757752] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134177.757837] ata4.00: configured for UDMA/33 [134177.773845] ata4: EH complete [134180.788663] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134180.788667] ata4: irq_stat 0x00000040, connection status changed [134180.788670] ata4: SError: { Persist CommWake 10B8B DevExch } [134180.788674] ata4: hard resetting link [134190.807092] ata4: softreset failed (device not ready) [134190.807103] ata4: hard resetting link [134191.702840] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134191.704802] ata4.00: supports DRM functions and may not be fully accessible [134191.704891] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134191.705152] ata4.00: supports DRM functions and may not be fully accessible [134191.705231] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134191.705301] ata4.00: configured for UDMA/33 [134191.718841] ata4: EH complete [134195.906433] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134195.906442] ata4: irq_stat 0x00000040, connection status changed [134195.906448] ata4: SError: { Persist CommWake 10B8B DevExch } [134195.906456] ata4: hard resetting link [134205.923888] ata4: softreset failed (device not ready) [134205.923898] ata4: hard resetting link [134206.827616] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134206.829610] ata4.00: supports DRM functions and may not be fully accessible [134206.829701] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134206.829988] ata4.00: supports DRM functions and may not be fully accessible [134206.830067] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134206.830160] ata4.00: configured for UDMA/33 [134206.843611] ata4: EH complete [134208.600200] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134208.600207] ata4: irq_stat 0x00000040, connection status changed [134208.600212] ata4: SError: { Persist CommWake 10B8B DevExch } [134208.600218] ata4: hard resetting link [134218.629103] ata4: softreset failed (device not ready) [134218.629113] ata4: hard resetting link [134219.548992] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134219.550898] ata4.00: supports DRM functions and may not be fully accessible [134219.551004] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134219.551355] ata4.00: supports DRM functions and may not be fully accessible [134219.551447] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134219.551522] ata4.00: configured for UDMA/33 [134219.564984] ata4: EH complete [134220.783156] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134220.783163] ata4: irq_stat 0x00000040, connection status changed [134220.783167] ata4: SError: { Persist CommWake 10B8B DevExch } [134220.783174] ata4: hard resetting link [134230.790582] ata4: softreset failed (device not ready) [134230.790593] ata4: hard resetting link [134231.702386] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134231.704308] ata4.00: supports DRM functions and may not be fully accessible [134231.704392] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134231.704624] ata4.00: supports DRM functions and may not be fully accessible [134231.704697] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134231.704761] ata4.00: configured for UDMA/33 [134231.718298] ata4: EH complete [134232.915874] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134232.915881] ata4: irq_stat 0x00000040, connection status changed [134232.915886] ata4: SError: { Persist CommWake 10B8B DevExch } [134232.915892] ata4: hard resetting link [134242.920004] ata4: softreset failed (device not ready) [134242.920014] ata4: hard resetting link [134243.823719] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134243.825643] ata4.00: supports DRM functions and may not be fully accessible [134243.825724] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134243.825949] ata4.00: supports DRM functions and may not be fully accessible [134243.826021] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134243.826085] ata4.00: configured for UDMA/33 [134243.839726] ata4: EH complete [134245.186599] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134245.186607] ata4: irq_stat 0x00000040, connection status changed [134245.186611] ata4: SError: { Persist CommWake 10B8B DevExch } [134245.186618] ata4: hard resetting link [134255.185311] ata4: softreset failed (device not ready) [134255.185318] ata4: hard resetting link [134256.085221] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134256.087141] ata4.00: supports DRM functions and may not be fully accessible [134256.087226] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134256.087451] ata4.00: supports DRM functions and may not be fully accessible [134256.087522] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134256.087586] ata4.00: configured for UDMA/33 [134256.101206] ata4: EH complete [134257.370021] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134257.370028] ata4: irq_stat 0x00000040, connection status changed [134257.370034] ata4: SError: { Persist CommWake 10B8B DevExch } [134257.370041] ata4: hard resetting link [134267.398789] ata4: softreset failed (device not ready) [134267.398798] ata4: hard resetting link [134268.294610] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134268.296598] ata4.00: supports DRM functions and may not be fully accessible [134268.296704] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134268.296963] ata4.00: supports DRM functions and may not be fully accessible [134268.297043] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134268.297112] ata4.00: configured for UDMA/33 [134268.310633] ata4: EH complete [134269.531726] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134269.531734] ata4: irq_stat 0x00000040, connection status changed [134269.531740] ata4: SError: { Persist CommWake 10B8B DevExch } [134269.531748] ata4: hard resetting link [134279.544194] ata4: softreset failed (device not ready) [134279.544205] ata4: hard resetting link [134280.440095] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134280.442093] ata4.00: supports DRM functions and may not be fully accessible [134280.442195] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134280.442451] ata4.00: supports DRM functions and may not be fully accessible [134280.442536] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134280.442608] ata4.00: configured for UDMA/33 [134280.455938] ata4: EH complete [134281.705743] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134281.705750] ata4: irq_stat 0x00000040, connection status changed [134281.705755] ata4: SError: { Persist CommWake 10B8B DevExch } [134281.705761] ata4: hard resetting link [134291.733600] ata4: softreset failed (device not ready) [134291.733610] ata4: hard resetting link [134292.629418] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134292.631340] ata4.00: supports DRM functions and may not be fully accessible [134292.631449] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134292.631730] ata4.00: supports DRM functions and may not be fully accessible [134292.631825] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134292.631905] ata4.00: configured for UDMA/33 [134292.645340] ata4: EH complete [134295.326091] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134295.326100] ata4: irq_stat 0x00000040, connection status changed [134295.326106] ata4: SError: { Persist CommWake 10B8B DevExch } [134295.326114] ata4: hard resetting link [134305.346720] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134305.346907] ata4.00: supports DRM functions and may not be fully accessible [134305.347008] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134305.347269] ata4.00: supports DRM functions and may not be fully accessible [134305.347360] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134305.347434] ata4.00: configured for UDMA/33 [134305.362634] ata4: EH complete [134307.769179] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134307.769187] ata4: irq_stat 0x00000040, connection status changed [134307.769193] ata4: SError: { Persist CommWake 10B8B DevExch } [134307.769201] ata4: hard resetting link [134317.660020] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134317.660200] ata4.00: supports DRM functions and may not be fully accessible [134317.660296] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134317.660565] ata4.00: supports DRM functions and may not be fully accessible [134317.660655] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134317.660743] ata4.00: configured for UDMA/33 [134317.676137] ata4: EH complete [134335.793005] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [134335.793014] ata4: irq_stat 0x00400000, PHY RDY changed [134335.793020] ata4: SError: { Persist PHYRdyChg } [134335.793028] ata4: hard resetting link [134345.174147] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134345.174316] ata4.00: supports DRM functions and may not be fully accessible [134345.174424] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134345.174679] ata4.00: supports DRM functions and may not be fully accessible [134345.174757] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134345.174823] ata4.00: configured for UDMA/33 [134345.190159] ata4: EH complete [134347.608358] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134347.608367] ata4: irq_stat 0x00000040, connection status changed [134347.608374] ata4: SError: { Persist CommWake 10B8B DevExch } [134347.608381] ata4: hard resetting link [134356.639785] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134356.639980] ata4.00: supports DRM functions and may not be fully accessible [134356.640080] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134356.640350] ata4.00: supports DRM functions and may not be fully accessible [134356.640437] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134356.640511] ata4.00: configured for UDMA/33 [134356.655705] ata4: EH complete [134358.640481] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134358.640486] ata4: irq_stat 0x00000040, connection status changed [134358.640490] ata4: SError: { Persist CommWake 10B8B DevExch } [134358.640496] ata4: hard resetting link [134367.649452] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134367.649718] ata4.00: supports DRM functions and may not be fully accessible [134367.649851] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134367.650096] ata4.00: supports DRM functions and may not be fully accessible [134367.650173] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134367.650241] ata4.00: configured for UDMA/33 [134367.669461] ata4: EH complete [134369.673527] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134369.673534] ata4: irq_stat 0x00000040, connection status changed [134369.673539] ata4: SError: { Persist CommWake 10B8B DevExch } [134369.673545] ata4: hard resetting link [134378.727010] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134378.727185] ata4.00: supports DRM functions and may not be fully accessible [134378.727307] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134378.727563] ata4.00: supports DRM functions and may not be fully accessible [134378.727645] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134378.727722] ata4.00: configured for UDMA/33 [134378.743026] ata4: EH complete [134380.719542] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134380.719549] ata4: irq_stat 0x00000040, connection status changed [134380.719554] ata4: SError: { Persist CommWake 10B8B DevExch } [134380.719560] ata4: hard resetting link [134389.716744] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134389.720149] ata4.00: supports DRM functions and may not be fully accessible [134389.720252] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134389.720492] ata4.00: supports DRM functions and may not be fully accessible [134389.720561] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134389.720623] ata4.00: configured for UDMA/33 [134389.736655] ata4: EH complete [134391.813850] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134391.813854] ata4: irq_stat 0x00000040, connection status changed [134391.813857] ata4: SError: { Persist CommWake 10B8B DevExch } [134391.813860] ata4: hard resetting link [134400.846286] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134400.846445] ata4.00: supports DRM functions and may not be fully accessible [134400.846526] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134400.846756] ata4.00: supports DRM functions and may not be fully accessible [134400.846829] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134400.846919] ata4.00: configured for UDMA/33 [134400.869253] ata4: EH complete [134402.848312] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134402.848322] ata4: irq_stat 0x00000040, connection status changed [134402.848329] ata4: SError: { Persist CommWake 10B8B DevExch } [134402.848338] ata4: hard resetting link [134411.708070] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134411.708255] ata4.00: supports DRM functions and may not be fully accessible [134411.708353] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134411.708612] ata4.00: supports DRM functions and may not be fully accessible [134411.708716] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134411.708787] ata4.00: configured for UDMA/33 [134411.723993] ata4: EH complete [134413.723375] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134413.723383] ata4: irq_stat 0x00000040, connection status changed [134413.723389] ata4: SError: { Persist CommWake 10B8B DevExch } [134413.723397] ata4: hard resetting link [134422.545707] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134422.545899] ata4.00: supports DRM functions and may not be fully accessible [134422.546003] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134422.546311] ata4.00: supports DRM functions and may not be fully accessible [134422.546412] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134422.546492] ata4.00: configured for UDMA/33 [134422.561711] ata4: EH complete [134505.087748] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [134505.087756] ata4: irq_stat 0x00400000, PHY RDY changed [134505.087762] ata4: SError: { Persist PHYRdyChg } [134505.087770] ata4: hard resetting link [134513.838324] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134513.838523] ata4.00: supports DRM functions and may not be fully accessible [134513.838640] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134513.838889] ata4.00: supports DRM functions and may not be fully accessible [134513.838993] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134513.839061] ata4.00: configured for UDMA/33 [134513.854229] ata4: EH complete [134515.817396] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen [134515.817405] ata4: irq_stat 0x00000040, connection status changed [134515.817411] ata4: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch } [134515.817419] ata4: hard resetting link [134524.476057] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134524.476242] ata4.00: supports DRM functions and may not be fully accessible [134524.476334] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134524.476608] ata4.00: supports DRM functions and may not be fully accessible [134524.476690] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134524.476760] ata4.00: configured for UDMA/33 [134524.496044] ata4: EH complete [134694.080117] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [134694.080125] ata4: irq_stat 0x00400000, PHY RDY changed [134694.080131] ata4: SError: { Persist PHYRdyChg } [134694.080139] ata4: hard resetting link [134703.026026] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134703.026227] ata4.00: supports DRM functions and may not be fully accessible [134703.026424] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134703.026699] ata4.00: supports DRM functions and may not be fully accessible [134703.026787] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134703.026861] ata4.00: configured for UDMA/33 [134703.042034] ata4: EH complete [134705.006739] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134705.006747] ata4: irq_stat 0x00000040, connection status changed [134705.006753] ata4: SError: { Persist CommWake 10B8B DevExch } [134705.006761] ata4: hard resetting link [134713.835724] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134713.838558] ata4.00: supports DRM functions and may not be fully accessible [134713.838671] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134713.839025] ata4.00: supports DRM functions and may not be fully accessible [134713.839114] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134713.839190] ata4.00: configured for UDMA/33 [134713.851662] ata4: EH complete [134717.683599] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134717.683608] ata4: irq_stat 0x00000040, connection status changed [134717.683614] ata4: SError: { Persist CommWake 10B8B DevExch } [134717.683622] ata4: hard resetting link [134726.704901] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134726.705077] ata4.00: supports DRM functions and may not be fully accessible [134726.705175] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134726.705430] ata4.00: supports DRM functions and may not be fully accessible [134726.705506] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134726.705572] ata4.00: configured for UDMA/33 [134726.720902] ata4: EH complete [134730.399584] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134730.399593] ata4: irq_stat 0x00000040, connection status changed [134730.399599] ata4: SError: { Persist CommWake 10B8B DevExch } [134730.399607] ata4: hard resetting link [134739.366207] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134739.366386] ata4.00: supports DRM functions and may not be fully accessible [134739.366494] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134739.366746] ata4.00: supports DRM functions and may not be fully accessible [134739.366826] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134739.366896] ata4.00: configured for UDMA/33 [134739.382207] ata4: EH complete [134741.363333] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134741.363342] ata4: irq_stat 0x00000040, connection status changed [134741.363348] ata4: SError: { Persist CommWake 10B8B DevExch } [134741.363356] ata4: hard resetting link [134750.291969] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134750.292174] ata4.00: supports DRM functions and may not be fully accessible [134750.292277] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134750.292549] ata4.00: supports DRM functions and may not be fully accessible [134750.292666] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134750.292740] ata4.00: configured for UDMA/33 [134750.307876] ata4: EH complete [134756.149670] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134756.149674] ata4: irq_stat 0x00000040, connection status changed [134756.149677] ata4: SError: { Persist CommWake 10B8B DevExch } [134756.149681] ata4: hard resetting link [134765.116725] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134765.118930] ata4.00: supports DRM functions and may not be fully accessible [134765.119025] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134765.119269] ata4.00: supports DRM functions and may not be fully accessible [134765.119344] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134765.119409] ata4.00: configured for UDMA/33 [134765.132811] ata4: EH complete [134767.134295] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134767.134303] ata4: irq_stat 0x00000040, connection status changed [134767.134309] ata4: SError: { Persist CommWake 10B8B DevExch } [134767.134317] ata4: hard resetting link [134776.046478] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134776.046673] ata4.00: supports DRM functions and may not be fully accessible [134776.046767] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134776.047003] ata4.00: supports DRM functions and may not be fully accessible [134776.047077] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134776.047142] ata4.00: configured for UDMA/33 [134776.062430] ata4: EH complete [134778.056074] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134778.056081] ata4: irq_stat 0x00000040, connection status changed [134778.056086] ata4: SError: { Persist CommWake 10B8B DevExch } [134778.056092] ata4: hard resetting link [134786.984079] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134786.984255] ata4.00: supports DRM functions and may not be fully accessible [134786.984345] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134786.984601] ata4.00: supports DRM functions and may not be fully accessible [134786.984685] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134786.984758] ata4.00: configured for UDMA/33 [134787.000093] ata4: EH complete [134788.982682] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134788.982689] ata4: irq_stat 0x00000040, connection status changed [134788.982694] ata4: SError: { Persist CommWake 10B8B DevExch } [134788.982700] ata4: hard resetting link [134797.913754] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134797.913923] ata4.00: supports DRM functions and may not be fully accessible [134797.914005] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134797.914232] ata4.00: supports DRM functions and may not be fully accessible [134797.914304] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134797.914369] ata4.00: configured for UDMA/33 [134797.929823] ata4: EH complete [134800.134411] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0202 action 0xe frozen [134800.134419] ata4: irq_stat 0x00000040, connection status changed [134800.134426] ata4: SError: { RecovComm Persist CommWake 10B8B DevExch } [134800.134434] ata4: hard resetting link [134809.103448] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134809.103643] ata4.00: supports DRM functions and may not be fully accessible [134809.103761] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134809.104022] ata4.00: supports DRM functions and may not be fully accessible [134809.104102] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134809.104179] ata4.00: configured for UDMA/33 [134809.119371] ata4: EH complete [134889.899051] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [134889.899061] ata4: irq_stat 0x00400000, PHY RDY changed [134889.899070] ata4: SError: { Persist PHYRdyChg } [134889.899079] ata4: hard resetting link [134899.552132] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134899.552313] ata4.00: supports DRM functions and may not be fully accessible [134899.552409] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134899.552670] ata4.00: supports DRM functions and may not be fully accessible [134899.552753] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134899.552821] ata4.00: configured for UDMA/33 [134899.568099] ata4: EH complete [134901.674837] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134901.674846] ata4: irq_stat 0x00000040, connection status changed [134901.674852] ata4: SError: { Persist CommWake 10B8B DevExch } [134901.674861] ata4: hard resetting link [134911.265610] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134911.267291] ata4.00: supports DRM functions and may not be fully accessible [134911.267433] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134911.267718] ata4.00: supports DRM functions and may not be fully accessible [134911.267810] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134911.267890] ata4.00: configured for UDMA/33 [134911.281605] ata4: EH complete [134913.709377] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134913.709384] ata4: irq_stat 0x00000040, connection status changed [134913.709389] ata4: SError: { Persist CommWake 10B8B DevExch } [134913.709395] ata4: hard resetting link [134923.283050] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134923.283228] ata4.00: supports DRM functions and may not be fully accessible [134923.283324] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134923.283585] ata4.00: supports DRM functions and may not be fully accessible [134923.283666] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134923.283735] ata4.00: configured for UDMA/33 [134923.299125] ata4: EH complete [134925.299781] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134925.299785] ata4: irq_stat 0x00000040, connection status changed [134925.299788] ata4: SError: { Persist CommWake 10B8B DevExch } [134925.299792] ata4: hard resetting link [134934.884594] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134934.884781] ata4.00: supports DRM functions and may not be fully accessible [134934.884883] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134934.885145] ata4.00: supports DRM functions and may not be fully accessible [134934.885231] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134934.885306] ata4.00: configured for UDMA/33 [134934.900572] ata4: EH complete [134936.899387] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134936.899395] ata4: irq_stat 0x00000040, connection status changed [134936.899400] ata4: SError: { Persist CommWake 10B8B DevExch } [134936.899406] ata4: hard resetting link [134946.506170] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134946.506351] ata4.00: supports DRM functions and may not be fully accessible [134946.506444] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134946.506698] ata4.00: supports DRM functions and may not be fully accessible [134946.506781] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134946.506853] ata4.00: configured for UDMA/33 [134946.526100] ata4: EH complete [134949.497723] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134949.497730] ata4: irq_stat 0x00000040, connection status changed [134949.497735] ata4: SError: { Persist CommWake 10B8B DevExch } [134949.497741] ata4: hard resetting link [134959.095427] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134959.095632] ata4.00: supports DRM functions and may not be fully accessible [134959.095725] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134959.095956] ata4.00: supports DRM functions and may not be fully accessible [134959.096045] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134959.096111] ata4.00: configured for UDMA/33 [134959.111440] ata4: EH complete [134961.099779] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134961.099788] ata4: irq_stat 0x00000040, connection status changed [134961.099794] ata4: SError: { Persist CommWake 10B8B DevExch } [134961.099802] ata4: hard resetting link [134970.644952] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134970.645170] ata4.00: supports DRM functions and may not be fully accessible [134970.645269] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134970.645535] ata4.00: supports DRM functions and may not be fully accessible [134970.645620] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134970.645695] ata4.00: configured for UDMA/33 [134970.660970] ata4: EH complete [134973.165073] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [134973.165079] ata4: irq_stat 0x00000040, connection status changed [134973.165082] ata4: SError: { Persist CommWake 10B8B DevExch } [134973.165087] ata4: hard resetting link [134982.810377] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [134982.810569] ata4.00: supports DRM functions and may not be fully accessible [134982.810669] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134982.810943] ata4.00: supports DRM functions and may not be fully accessible [134982.811026] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [134982.811097] ata4.00: configured for UDMA/33 [134982.830451] ata4: EH complete [135014.032948] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [135014.032957] ata4: irq_stat 0x00400000, PHY RDY changed [135014.032963] ata4: SError: { Persist PHYRdyChg } [135014.032971] ata4: hard resetting link [135023.733739] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135023.739566] ata4.00: supports DRM functions and may not be fully accessible [135023.739657] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135023.739900] ata4.00: supports DRM functions and may not be fully accessible [135023.739982] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135023.740050] ata4.00: configured for UDMA/33 [135023.753646] ata4: EH complete [135025.789906] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [135025.789913] ata4: irq_stat 0x00000040, connection status changed [135025.789918] ata4: SError: { Persist CommWake 10B8B DevExch } [135025.789924] ata4: hard resetting link [135035.491234] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135035.491419] ata4.00: supports DRM functions and may not be fully accessible [135035.491512] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135035.491854] ata4.00: supports DRM functions and may not be fully accessible [135035.491940] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135035.492010] ata4.00: configured for UDMA/33 [135035.507165] ata4: EH complete [135037.786470] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [135037.786480] ata4: irq_stat 0x00000040, connection status changed [135037.786488] ata4: SError: { Persist CommWake 10B8B DevExch } [135037.786497] ata4: hard resetting link [135047.424695] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135047.424878] ata4.00: supports DRM functions and may not be fully accessible [135047.424977] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135047.425201] ata4.00: supports DRM functions and may not be fully accessible [135047.425270] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135047.425335] ata4.00: configured for UDMA/33 [135047.440622] ata4: EH complete [135050.209043] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [135050.209052] ata4: irq_stat 0x00000040, connection status changed [135050.209058] ata4: SError: { Persist CommWake 10B8B DevExch } [135050.209066] ata4: hard resetting link [135059.857990] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135059.858180] ata4.00: supports DRM functions and may not be fully accessible [135059.858281] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135059.858574] ata4.00: supports DRM functions and may not be fully accessible [135059.858667] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135059.858742] ata4.00: configured for UDMA/33 [135059.873975] ata4: EH complete [135061.857556] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [135061.857562] ata4: irq_stat 0x00000040, connection status changed [135061.857567] ata4: SError: { Persist CommWake 10B8B DevExch } [135061.857574] ata4: hard resetting link [135071.543625] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135071.543822] ata4.00: supports DRM functions and may not be fully accessible [135071.543940] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135071.544171] ata4.00: supports DRM functions and may not be fully accessible [135071.544242] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135071.544305] ata4.00: configured for UDMA/33 [135071.559551] ata4: EH complete [135083.472887] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [135083.472911] ata4: irq_stat 0x00400000, PHY RDY changed [135083.472916] ata4: SError: { Persist PHYRdyChg } [135083.472923] ata4: hard resetting link [135093.142963] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135093.143147] ata4.00: supports DRM functions and may not be fully accessible [135093.143252] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135093.143538] ata4.00: supports DRM functions and may not be fully accessible [135093.143626] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135093.143699] ata4.00: configured for UDMA/33 [135093.158960] ata4: EH complete [135095.144518] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [135095.144527] ata4: irq_stat 0x00000040, connection status changed [135095.144533] ata4: SError: { Persist CommWake 10B8B DevExch } [135095.144541] ata4: hard resetting link [135104.772478] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135104.773224] ata4.00: supports DRM functions and may not be fully accessible [135104.773324] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135104.773679] ata4.00: supports DRM functions and may not be fully accessible [135104.773769] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135104.773843] ata4.00: configured for UDMA/33 [135104.788412] ata4: EH complete [135113.553894] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [135113.553903] ata4: irq_stat 0x00000040, connection status changed [135113.553909] ata4: SError: { Persist CommWake 10B8B DevExch } [135113.553917] ata4: hard resetting link [135123.180493] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135123.184068] ata4.00: supports DRM functions and may not be fully accessible [135123.184174] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135123.184553] ata4.00: supports DRM functions and may not be fully accessible [135123.184690] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135123.184758] ata4.00: configured for UDMA/33 [135123.200551] ata4: EH complete [135125.229872] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [135125.229881] ata4: irq_stat 0x00000040, connection status changed [135125.229887] ata4: SError: { Persist CommWake 10B8B DevExch } [135125.229895] ata4: hard resetting link [135134.898068] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135134.898264] ata4.00: supports DRM functions and may not be fully accessible [135134.898366] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135134.898670] ata4.00: supports DRM functions and may not be fully accessible [135134.898754] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135134.898818] ata4.00: configured for UDMA/33 [135134.914003] ata4: EH complete [135136.901895] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [135136.901904] ata4: irq_stat 0x00000040, connection status changed [135136.901910] ata4: SError: { Persist CommWake 10B8B DevExch } [135136.901918] ata4: hard resetting link [135146.611533] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135146.611734] ata4.00: supports DRM functions and may not be fully accessible [135146.611833] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135146.612091] ata4.00: supports DRM functions and may not be fully accessible [135146.612171] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135146.612244] ata4.00: configured for UDMA/33 [135146.627497] ata4: EH complete [135148.571096] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [135148.571104] ata4: irq_stat 0x00000040, connection status changed [135148.571110] ata4: SError: { Persist CommWake 10B8B DevExch } [135148.571118] ata4: hard resetting link [135158.257157] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135158.257354] ata4.00: supports DRM functions and may not be fully accessible [135158.257459] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135158.257777] ata4.00: supports DRM functions and may not be fully accessible [135158.257864] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135158.257938] ata4.00: configured for UDMA/33 [135158.273089] ata4: EH complete [135173.792706] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [135173.792714] ata4: irq_stat 0x00400000, PHY RDY changed [135173.792720] ata4: SError: { Persist PHYRdyChg } [135173.792728] ata4: hard resetting link [135183.551728] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135183.551914] ata4.00: supports DRM functions and may not be fully accessible [135183.552008] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135183.552281] ata4.00: supports DRM functions and may not be fully accessible [135183.552362] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135183.552431] ata4.00: configured for UDMA/33 [135183.567633] ata4: EH complete [135185.545651] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [135185.545658] ata4: irq_stat 0x00000040, connection status changed [135185.545663] ata4: SError: { Persist CommWake 10B8B DevExch } [135185.545670] ata4: hard resetting link [135195.285276] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [135195.285453] ata4.00: supports DRM functions and may not be fully accessible [135195.285538] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135195.285778] ata4.00: supports DRM functions and may not be fully accessible [135195.285852] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [135195.285917] ata4.00: configured for UDMA/33 [135195.301216] ata4: EH complete [145378.702878] systemd-hostnamed[2205]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [145839.644451] systemd-hostnamed[4611]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [147490.134718] systemd-hostnamed[11322]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [161311.709506] audit: type=1400 audit(1455539847.480:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4790 comm="apparmor_parser" [161311.709516] audit: type=1400 audit(1455539847.480:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4790 comm="apparmor_parser" [161311.709877] audit: type=1400 audit(1455539847.480:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4790 comm="apparmor_parser" [161857.039756] usb 3-3: USB disconnect, device number 3 [161857.110789] plugin-containe[16675]: segfault at 20001 ip 0000000000020001 sp 00007ffe08fb0558 error 14 [161857.327574] usb 3-3: new high-speed USB device number 4 using ehci-pci [161857.494122] usb 3-3: New USB device found, idVendor=041e, idProduct=4071 [161857.494126] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [161857.494128] usb 3-3: Product: VF0415 Live! Cam Vid. IM Ultra [161857.494129] usb 3-3: Manufacturer: Creative Technology Ltd. [161857.494799] uvcvideo: Found UVC 1.00 device VF0415 Live! Cam Vid. IM Ultra (041e:4071) [161857.502463] input: VF0415 Live! Cam Vid. IM Ultra as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3:1.0/input/input22 [161857.532235] usb 3-3: 3:1: cannot get freq at ep 0x84 [161857.541854] usb 3-3: Warning! Unlikely big volume range (=3328), cval->res is probably wrong. [161857.541858] usb 3-3: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1 [161857.632576] usb 3-3: 3:1: cannot get freq at ep 0x84 [161857.655628] usb 3-3: 3:1: cannot get freq at ep 0x84 [161857.694684] usb 3-3: 3:1: cannot get freq at ep 0x84 [161857.717850] usb 3-3: 3:1: cannot get freq at ep 0x84 [176723.498132] traps: gftp-gtk[24715] general protection ip:7f5102af2e0c sp:7f50f37fb998 error:0 in libc-2.19.so[7f5102a70000+1bb000] [203999.437471] systemd-hostnamed[13521]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [211592.292782] ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [211592.292787] ata4.00: irq_stat 0x00400000, PHY RDY changed [211592.292791] ata4: SError: { Persist PHYRdyChg } [211592.292794] ata4.00: failed command: FLUSH CACHE EXT [211592.292799] ata4.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 3 [211592.292799] res 40/00:10:00:01:05/00:00:3a:00:00/40 Emask 0x10 (ATA bus error) [211592.292802] ata4.00: status: { DRDY } [211592.292807] ata4: hard resetting link [211594.520382] ata4: COMRESET failed (errno=-32) [211594.520403] ata4: reset failed (errno=-32), retrying in 8 secs [211602.290637] ata4: hard resetting link [211604.582294] ata4: COMRESET failed (errno=-32) [211604.582305] ata4: reset failed (errno=-32), retrying in 8 secs [211612.288505] ata4: hard resetting link [211613.184311] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211613.186277] ata4.00: supports DRM functions and may not be fully accessible [211613.186359] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211613.186611] ata4.00: supports DRM functions and may not be fully accessible [211613.186684] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211613.186747] ata4.00: configured for UDMA/33 [211613.186749] ata4.00: retrying FLUSH 0xea Emask 0x10 [211613.200307] ata4.00: device reported invalid CHS sector 0 [211613.200324] ata4: EH complete [211615.633821] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211615.633827] ata4: irq_stat 0x00000040, connection status changed [211615.633830] ata4: SError: { Persist CommWake 10B8B DevExch } [211615.633835] ata4: hard resetting link [211619.666935] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211619.668857] ata4.00: supports DRM functions and may not be fully accessible [211619.668943] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211619.669190] ata4.00: supports DRM functions and may not be fully accessible [211619.669269] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211619.669336] ata4.00: configured for UDMA/33 [211619.682937] ata4: EH complete [211621.526585] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211621.526589] ata4: irq_stat 0x00000040, connection status changed [211621.526592] ata4: SError: { Persist CommWake 10B8B DevExch } [211621.526595] ata4: hard resetting link [211625.509774] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211625.511671] ata4.00: supports DRM functions and may not be fully accessible [211625.511759] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211625.512096] ata4.00: supports DRM functions and may not be fully accessible [211625.512169] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211625.512238] ata4.00: configured for UDMA/33 [211625.525699] ata4: EH complete [211628.109043] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen [211628.109048] ata4: irq_stat 0x00000040, connection status changed [211628.109051] ata4: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch } [211628.109055] ata4: hard resetting link [211631.992330] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211631.994256] ata4.00: supports DRM functions and may not be fully accessible [211631.994351] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211631.994707] ata4.00: supports DRM functions and may not be fully accessible [211631.994794] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211631.994869] ata4.00: configured for UDMA/33 [211632.012324] ata4: EH complete [211634.646300] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211634.646312] ata4: irq_stat 0x00000040, connection status changed [211634.646319] ata4: SError: { Persist CommWake 10B8B DevExch } [211634.646329] ata4: hard resetting link [211636.863279] ata4: COMRESET failed (errno=-32) [211636.863288] ata4: reset failed (errno=-32), retrying in 8 secs [211644.645612] ata4: hard resetting link [211645.557507] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211645.559499] ata4.00: supports DRM functions and may not be fully accessible [211645.559589] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211645.559929] ata4.00: supports DRM functions and may not be fully accessible [211645.560013] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211645.560083] ata4.00: configured for UDMA/33 [211645.577432] ata4: EH complete [211646.634178] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211646.634186] ata4: irq_stat 0x00000040, connection status changed [211646.634192] ata4: SError: { Persist CommWake 10B8B DevExch } [211646.634200] ata4: hard resetting link [211648.864796] ata4: COMRESET failed (errno=-32) [211648.864806] ata4: reset failed (errno=-32), retrying in 8 secs [211656.631070] ata4: hard resetting link [211662.069909] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211662.071806] ata4.00: supports DRM functions and may not be fully accessible [211662.071888] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211662.072121] ata4.00: supports DRM functions and may not be fully accessible [211662.072195] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211662.072260] ata4.00: configured for UDMA/33 [211662.085927] ata4: EH complete [211663.921533] ata4.00: exception Emask 0x10 SAct 0x1000000 SErr 0x40d0202 action 0xe frozen [211663.921542] ata4.00: irq_stat 0x00000040, connection status changed [211663.921547] ata4: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch } [211663.921553] ata4.00: failed command: READ FPDMA QUEUED [211663.921560] ata4.00: cmd 60/08:c0:c8:30:31/00:00:23:00:00/40 tag 24 ncq 4096 in [211663.921560] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [211663.921565] ata4.00: status: { DRDY } [211663.921571] ata4: hard resetting link [211669.064461] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211669.066390] ata4.00: supports DRM functions and may not be fully accessible [211669.066491] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211669.066753] ata4.00: supports DRM functions and may not be fully accessible [211669.066839] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211669.066916] ata4.00: configured for UDMA/33 [211669.080542] ata4: EH complete [211670.919749] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211670.919753] ata4: irq_stat 0x00000040, connection status changed [211670.919756] ata4: SError: { Persist CommWake 10B8B DevExch } [211670.919761] ata4: hard resetting link [211675.199131] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211675.201080] ata4.00: supports DRM functions and may not be fully accessible [211675.201174] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211675.201491] ata4.00: supports DRM functions and may not be fully accessible [211675.201565] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211675.201632] ata4.00: configured for UDMA/33 [211675.219138] ata4: EH complete [211678.256833] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211678.256842] ata4: irq_stat 0x00000040, connection status changed [211678.256848] ata4: SError: { Persist CommWake 10B8B DevExch } [211678.256856] ata4: hard resetting link [211682.173719] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211682.175659] ata4.00: supports DRM functions and may not be fully accessible [211682.175853] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211682.176125] ata4.00: supports DRM functions and may not be fully accessible [211682.176210] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211682.176284] ata4.00: configured for UDMA/33 [211682.189715] ata4: EH complete [211684.015426] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211684.015435] ata4: irq_stat 0x00000040, connection status changed [211684.015441] ata4: SError: { Persist CommWake 10B8B DevExch } [211684.015450] ata4: hard resetting link [211687.940411] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211687.942453] ata4.00: supports DRM functions and may not be fully accessible [211687.942542] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211687.942864] ata4.00: supports DRM functions and may not be fully accessible [211687.942942] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211687.943011] ata4.00: configured for UDMA/33 [211687.956420] ata4: EH complete [211688.984282] ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen [211688.984287] ata4.00: irq_stat 0x00000040, connection status changed [211688.984290] ata4: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch } [211688.984291] ata4.00: failed command: FLUSH CACHE EXT [211688.984295] ata4.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 13 [211688.984295] res 40/00:60:d8:0e:05/00:00:3a:00:00/40 Emask 0x10 (ATA bus error) [211688.984297] ata4.00: status: { DRDY } [211688.984300] ata4: hard resetting link [211693.479308] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211693.481199] ata4.00: supports DRM functions and may not be fully accessible [211693.481288] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211693.481534] ata4.00: supports DRM functions and may not be fully accessible [211693.481612] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211693.481681] ata4.00: configured for UDMA/33 [211693.481684] ata4.00: retrying FLUSH 0xea Emask 0x10 [211693.495316] ata4: EH complete [211695.343949] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211695.343958] ata4: irq_stat 0x00000040, connection status changed [211695.343964] ata4: SError: { Persist CommWake 10B8B DevExch } [211695.343972] ata4: hard resetting link [211699.506034] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211699.507962] ata4.00: supports DRM functions and may not be fully accessible [211699.508078] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211699.508411] ata4.00: supports DRM functions and may not be fully accessible [211699.508500] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211699.508574] ata4.00: configured for UDMA/33 [211699.521937] ata4: EH complete [211702.153521] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211702.153528] ata4: irq_stat 0x00000040, connection status changed [211702.153533] ata4: SError: { Persist CommWake 10B8B DevExch } [211702.153540] ata4: hard resetting link [211706.072632] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211706.074513] ata4.00: supports DRM functions and may not be fully accessible [211706.074595] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211706.074829] ata4.00: supports DRM functions and may not be fully accessible [211706.074900] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211706.074964] ata4.00: configured for UDMA/33 [211706.088560] ata4: EH complete [211708.185611] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211708.185616] ata4: irq_stat 0x00000040, connection status changed [211708.185619] ata4: SError: { Persist CommWake 10B8B DevExch } [211708.185624] ata4: hard resetting link [211712.459272] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211712.461228] ata4.00: supports DRM functions and may not be fully accessible [211712.461310] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211712.461546] ata4.00: supports DRM functions and may not be fully accessible [211712.461617] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211712.461680] ata4.00: configured for UDMA/33 [211712.475200] ata4: EH complete [211714.282474] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211714.282483] ata4: irq_stat 0x00000040, connection status changed [211714.282489] ata4: SError: { Persist CommWake 10B8B DevExch } [211714.282497] ata4: hard resetting link [211718.378001] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211718.379989] ata4.00: supports DRM functions and may not be fully accessible [211718.380082] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211718.380346] ata4.00: supports DRM functions and may not be fully accessible [211718.380417] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211718.380480] ata4.00: configured for UDMA/33 [211718.393915] ata4: EH complete [211720.222286] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211720.222293] ata4: irq_stat 0x00000040, connection status changed [211720.222298] ata4: SError: { Persist CommWake 10B8B DevExch } [211720.222304] ata4: hard resetting link [211724.108728] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211724.110693] ata4.00: supports DRM functions and may not be fully accessible [211724.110790] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211724.111112] ata4.00: supports DRM functions and may not be fully accessible [211724.111211] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211724.111275] ata4.00: configured for UDMA/33 [211724.124806] ata4: EH complete [211726.849001] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211726.849008] ata4: irq_stat 0x00000040, connection status changed [211726.849013] ata4: SError: { Persist CommWake 10B8B DevExch } [211726.849019] ata4: hard resetting link [211730.847274] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211730.849253] ata4.00: supports DRM functions and may not be fully accessible [211730.849360] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211730.849711] ata4.00: supports DRM functions and may not be fully accessible [211730.849803] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211730.849881] ata4.00: configured for UDMA/33 [211730.863294] ata4: EH complete [211732.687891] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211732.687897] ata4: irq_stat 0x00000040, connection status changed [211732.687902] ata4: SError: { Persist CommWake 10B8B DevExch } [211732.687908] ata4: hard resetting link [211736.686020] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211736.687979] ata4.00: supports DRM functions and may not be fully accessible [211736.688079] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211736.688341] ata4.00: supports DRM functions and may not be fully accessible [211736.688419] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211736.688485] ata4.00: configured for UDMA/33 [211736.702111] ata4: EH complete [211738.542698] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211738.542707] ata4: irq_stat 0x00000040, connection status changed [211738.542713] ata4: SError: { Persist CommWake 10B8B DevExch } [211738.542721] ata4: hard resetting link [211742.412811] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211742.414800] ata4.00: supports DRM functions and may not be fully accessible [211742.414911] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211742.415197] ata4.00: supports DRM functions and may not be fully accessible [211742.415301] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211742.415379] ata4.00: configured for UDMA/33 [211742.428788] ata4: EH complete [211744.249950] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211744.249957] ata4: irq_stat 0x00000040, connection status changed [211744.249962] ata4: SError: { Persist CommWake 10B8B DevExch } [211744.249969] ata4: hard resetting link [211748.075602] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211748.077583] ata4.00: supports DRM functions and may not be fully accessible [211748.077665] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211748.077896] ata4.00: supports DRM functions and may not be fully accessible [211748.077969] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211748.078033] ata4.00: configured for UDMA/33 [211748.091614] ata4: EH complete [211750.100654] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211750.100663] ata4: irq_stat 0x00000040, connection status changed [211750.100669] ata4: SError: { Persist CommWake 10B8B DevExch } [211750.100677] ata4: hard resetting link [211753.982420] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211753.984382] ata4.00: supports DRM functions and may not be fully accessible [211753.984477] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211753.984803] ata4.00: supports DRM functions and may not be fully accessible [211753.984877] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211753.984940] ata4.00: configured for UDMA/33 [211754.002360] ata4: EH complete [211755.851055] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen [211755.851062] ata4: irq_stat 0x00000040, connection status changed [211755.851067] ata4: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch } [211755.851073] ata4: hard resetting link [211759.713238] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211759.715219] ata4.00: supports DRM functions and may not be fully accessible [211759.715327] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211759.715571] ata4.00: supports DRM functions and may not be fully accessible [211759.715644] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211759.715710] ata4.00: configured for UDMA/33 [211759.729123] ata4: EH complete [211762.164883] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211762.164891] ata4: irq_stat 0x00000040, connection status changed [211762.164897] ata4: SError: { Persist CommWake 10B8B DevExch } [211762.164906] ata4: hard resetting link [211766.087785] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211766.089667] ata4.00: supports DRM functions and may not be fully accessible [211766.089859] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211766.090116] ata4.00: supports DRM functions and may not be fully accessible [211766.090194] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211766.090262] ata4.00: configured for UDMA/33 [211766.103853] ata4: EH complete [211767.943778] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211767.943788] ata4: irq_stat 0x00000040, connection status changed [211767.943796] ata4: SError: { Persist CommWake 10B8B DevExch } [211767.943806] ata4: hard resetting link [211771.762541] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211771.764449] ata4.00: supports DRM functions and may not be fully accessible [211771.764534] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211771.764767] ata4.00: supports DRM functions and may not be fully accessible [211771.764840] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211771.764907] ata4.00: configured for UDMA/33 [211771.778539] ata4: EH complete [211774.018999] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211774.019008] ata4: irq_stat 0x00000040, connection status changed [211774.019013] ata4: SError: { Persist CommWake 10B8B DevExch } [211774.019022] ata4: hard resetting link [211777.853271] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211777.855185] ata4.00: supports DRM functions and may not be fully accessible [211777.855285] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211777.855545] ata4.00: supports DRM functions and may not be fully accessible [211777.855630] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211777.855703] ata4.00: configured for UDMA/33 [211777.869355] ata4: EH complete [211779.699298] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211779.699307] ata4: irq_stat 0x00000040, connection status changed [211779.699313] ata4: SError: { Persist CommWake 10B8B DevExch } [211779.699321] ata4: hard resetting link [211783.568052] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211783.570021] ata4.00: supports DRM functions and may not be fully accessible [211783.570119] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211783.570418] ata4.00: supports DRM functions and may not be fully accessible [211783.570510] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211783.570586] ata4.00: configured for UDMA/33 [211783.588036] ata4: EH complete [211785.383261] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211785.383270] ata4: irq_stat 0x00000040, connection status changed [211785.383277] ata4: SError: { Persist CommWake 10B8B DevExch } [211785.383285] ata4: hard resetting link [211789.250827] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211789.252841] ata4.00: supports DRM functions and may not be fully accessible [211789.252935] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211789.253167] ata4.00: supports DRM functions and may not be fully accessible [211789.253242] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211789.253308] ata4.00: configured for UDMA/33 [211789.266833] ata4: EH complete [211791.090586] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211791.090591] ata4: irq_stat 0x00000040, connection status changed [211791.090595] ata4: SError: { Persist CommWake 10B8B DevExch } [211791.090600] ata4: hard resetting link [211794.905716] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211794.907689] ata4.00: supports DRM functions and may not be fully accessible [211794.907789] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211794.908020] ata4.00: supports DRM functions and may not be fully accessible [211794.908090] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211794.908153] ata4.00: configured for UDMA/33 [211794.921642] ata4: EH complete [211797.969480] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211797.969489] ata4: irq_stat 0x00000040, connection status changed [211797.969495] ata4: SError: { Persist CommWake 10B8B DevExch } [211797.969503] ata4: hard resetting link [211801.888152] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211801.890102] ata4.00: supports DRM functions and may not be fully accessible [211801.890224] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211801.890581] ata4.00: supports DRM functions and may not be fully accessible [211801.890675] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211801.890753] ata4.00: configured for UDMA/33 [211801.904236] ata4: EH complete [211803.717108] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211803.717116] ata4: irq_stat 0x00000040, connection status changed [211803.717122] ata4: SError: { Persist CommWake 10B8B DevExch } [211803.717131] ata4: hard resetting link [211807.539021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211807.540964] ata4.00: supports DRM functions and may not be fully accessible [211807.541078] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211807.541331] ata4.00: supports DRM functions and may not be fully accessible [211807.541412] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211807.541481] ata4.00: configured for UDMA/33 [211807.554940] ata4: EH complete [211809.400816] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211809.400824] ata4: irq_stat 0x00000040, connection status changed [211809.400830] ata4: SError: { Persist CommWake 10B8B DevExch } [211809.400838] ata4: hard resetting link [211813.225737] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211813.227679] ata4.00: supports DRM functions and may not be fully accessible [211813.227775] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211813.228122] ata4.00: supports DRM functions and may not be fully accessible [211813.228214] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211813.228286] ata4.00: configured for UDMA/33 [211813.241722] ata4: EH complete [211815.086748] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211815.086756] ata4: irq_stat 0x00000040, connection status changed [211815.086762] ata4: SError: { Persist CommWake 10B8B DevExch } [211815.086770] ata4: hard resetting link [211818.956577] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211818.958554] ata4.00: supports DRM functions and may not be fully accessible [211818.958647] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211818.958976] ata4.00: supports DRM functions and may not be fully accessible [211818.959051] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211818.959117] ata4.00: configured for UDMA/33 [211818.972506] ata4: EH complete [211820.780331] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211820.780339] ata4: irq_stat 0x00000040, connection status changed [211820.780345] ata4: SError: { Persist CommWake 10B8B DevExch } [211820.780353] ata4: hard resetting link [211824.619452] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211824.621411] ata4.00: supports DRM functions and may not be fully accessible [211824.621514] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211824.621783] ata4.00: supports DRM functions and may not be fully accessible [211824.621865] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211824.621935] ata4.00: configured for UDMA/33 [211824.635327] ata4: EH complete [211826.488629] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211826.488635] ata4: irq_stat 0x00000040, connection status changed [211826.488639] ata4: SError: { Persist CommWake 10B8B DevExch } [211826.488646] ata4: hard resetting link [211830.354078] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211830.355953] ata4.00: supports DRM functions and may not be fully accessible [211830.356032] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211830.356262] ata4.00: supports DRM functions and may not be fully accessible [211830.356331] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211830.356394] ata4.00: configured for UDMA/33 [211830.370167] ata4: EH complete [211832.205834] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211832.205842] ata4: irq_stat 0x00000040, connection status changed [211832.205846] ata4: SError: { Persist CommWake 10B8B DevExch } [211832.205853] ata4: hard resetting link [211836.020884] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211836.022852] ata4.00: supports DRM functions and may not be fully accessible [211836.022961] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211836.023246] ata4.00: supports DRM functions and may not be fully accessible [211836.023332] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211836.023404] ata4.00: configured for UDMA/33 [211836.036891] ata4: EH complete [211837.864975] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211837.864983] ata4: irq_stat 0x00000040, connection status changed [211837.864990] ata4: SError: { Persist CommWake 10B8B DevExch } [211837.864998] ata4: hard resetting link [211841.683672] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211841.685659] ata4.00: supports DRM functions and may not be fully accessible [211841.685765] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211841.686030] ata4.00: supports DRM functions and may not be fully accessible [211841.686111] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211841.686181] ata4.00: configured for UDMA/33 [211841.699736] ata4: EH complete [211845.354583] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211845.354592] ata4: irq_stat 0x00000040, connection status changed [211845.354598] ata4: SError: { Persist CommWake 10B8B DevExch } [211845.354607] ata4: hard resetting link [211849.214156] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211849.216163] ata4.00: supports DRM functions and may not be fully accessible [211849.216278] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211849.216543] ata4.00: supports DRM functions and may not be fully accessible [211849.216624] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211849.216694] ata4.00: configured for UDMA/33 [211849.234154] ata4: EH complete [211851.031478] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen [211851.031499] ata4: irq_stat 0x00000040, connection status changed [211851.031504] ata4: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch } [211851.031508] ata4: hard resetting link [211854.888921] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211854.890805] ata4.00: supports DRM functions and may not be fully accessible [211854.890897] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211854.891149] ata4.00: supports DRM functions and may not be fully accessible [211854.891230] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211854.891299] ata4.00: configured for UDMA/33 [211854.904858] ata4: EH complete [211857.972941] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211857.972950] ata4: irq_stat 0x00000040, connection status changed [211857.972956] ata4: SError: { Persist CommWake 10B8B DevExch } [211857.972964] ata4: hard resetting link [211862.063347] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211862.065357] ata4.00: supports DRM functions and may not be fully accessible [211862.065452] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211862.065720] ata4.00: supports DRM functions and may not be fully accessible [211862.065805] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211862.065879] ata4.00: configured for UDMA/33 [211862.079322] ata4: EH complete [211864.910856] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211864.910865] ata4: irq_stat 0x00000040, connection status changed [211864.910871] ata4: SError: { Persist CommWake 10B8B DevExch } [211864.910879] ata4: hard resetting link [211868.861964] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211868.863947] ata4.00: supports DRM functions and may not be fully accessible [211868.864048] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211868.864337] ata4.00: supports DRM functions and may not be fully accessible [211868.864444] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211868.864525] ata4.00: configured for UDMA/33 [211868.877893] ata4: EH complete [211870.693208] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211870.693215] ata4: irq_stat 0x00000040, connection status changed [211870.693220] ata4: SError: { Persist CommWake 10B8B DevExch } [211870.693226] ata4: hard resetting link [211874.732639] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211874.734589] ata4.00: supports DRM functions and may not be fully accessible [211874.734691] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211874.735037] ata4.00: supports DRM functions and may not be fully accessible [211874.735123] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211874.735204] ata4.00: configured for UDMA/33 [211874.748626] ata4: EH complete [211876.583471] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211876.583485] ata4: irq_stat 0x00000040, connection status changed [211876.583488] ata4: SError: { Persist CommWake 10B8B DevExch } [211876.583493] ata4: hard resetting link [211880.667441] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211880.669473] ata4.00: supports DRM functions and may not be fully accessible [211880.669580] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211880.669828] ata4.00: supports DRM functions and may not be fully accessible [211880.669904] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211880.669969] ata4.00: configured for UDMA/33 [211880.683347] ata4: EH complete [211882.479668] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211882.479677] ata4: irq_stat 0x00000040, connection status changed [211882.479683] ata4: SError: { Persist CommWake 10B8B DevExch } [211882.479691] ata4: hard resetting link [211886.286294] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211886.288332] ata4.00: supports DRM functions and may not be fully accessible [211886.288432] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211886.288787] ata4.00: supports DRM functions and may not be fully accessible [211886.288872] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211886.288945] ata4.00: configured for UDMA/33 [211886.302174] ata4: EH complete [211888.160546] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211888.160553] ata4: irq_stat 0x00000040, connection status changed [211888.160558] ata4: SError: { Persist CommWake 10B8B DevExch } [211888.160565] ata4: hard resetting link [211891.964963] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211891.966910] ata4.00: supports DRM functions and may not be fully accessible [211891.967009] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211891.967276] ata4.00: supports DRM functions and may not be fully accessible [211891.967361] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211891.967434] ata4.00: configured for UDMA/33 [211891.980982] ata4: EH complete [211893.848894] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211893.848903] ata4: irq_stat 0x00000040, connection status changed [211893.848909] ata4: SError: { Persist CommWake 10B8B DevExch } [211893.848918] ata4: hard resetting link [211897.667828] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211897.669746] ata4.00: supports DRM functions and may not be fully accessible [211897.669844] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211897.670077] ata4.00: supports DRM functions and may not be fully accessible [211897.670147] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211897.670210] ata4.00: configured for UDMA/33 [211897.683810] ata4: EH complete [211899.829532] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0200 action 0xe frozen [211899.829540] ata4: irq_stat 0x00000040, connection status changed [211899.829546] ata4: SError: { Persist CommWake 10B8B DevExch } [211899.829554] ata4: hard resetting link [211903.702543] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [211903.704504] ata4.00: supports DRM functions and may not be fully accessible [211903.704602] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211903.704958] ata4.00: supports DRM functions and may not be fully accessible [211903.705039] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [211903.705110] ata4.00: configured for UDMA/33 [211903.718467] ata4: EH complete [248783.941687] audit: type=1400 audit(1455627338.338:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=11364 comm="apparmor_parser" [248783.941698] audit: type=1400 audit(1455627338.338:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=11364 comm="apparmor_parser" [248783.942255] audit: type=1400 audit(1455627338.338:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=11364 comm="apparmor_parser" [307801.902862] systemd-hostnamed[31266]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [335223.885071] audit: type=1400 audit(1455713796.685:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=17699 comm="apparmor_parser" [335223.885082] audit: type=1400 audit(1455713796.685:79): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=17699 comm="apparmor_parser" [335223.885679] audit: type=1400 audit(1455713796.685:80): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=17699 comm="apparmor_parser" [338084.941622] systemd-hostnamed[20205]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [346056.424448] systemd-hostnamed[20682]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [361301.405250] systemd-hostnamed[21205]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [381924.001756] usb 3-3: USB disconnect, device number 4 [381924.058012] plugin-containe[26289]: segfault at 20001 ip 0000000000020001 sp 00007ffdd32e57c8 error 14 [381924.317440] usb 3-3: new high-speed USB device number 5 using ehci-pci [381924.483976] usb 3-3: New USB device found, idVendor=041e, idProduct=4071 [381924.483981] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [381924.483983] usb 3-3: Product: VF0415 Live! Cam Vid. IM Ultra [381924.483985] usb 3-3: Manufacturer: Creative Technology Ltd. [381924.484672] uvcvideo: Found UVC 1.00 device VF0415 Live! Cam Vid. IM Ultra (041e:4071) [381924.492232] input: VF0415 Live! Cam Vid. IM Ultra as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3:1.0/input/input23 [381924.522089] usb 3-3: 3:1: cannot get freq at ep 0x84 [381924.531708] usb 3-3: Warning! Unlikely big volume range (=3328), cval->res is probably wrong. [381924.531712] usb 3-3: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1 [381924.597320] usb 3-3: 3:1: cannot get freq at ep 0x84 [381924.620517] usb 3-3: 3:1: cannot get freq at ep 0x84 [381924.659636] usb 3-3: 3:1: cannot get freq at ep 0x84 [381924.682556] usb 3-3: 3:1: cannot get freq at ep 0x84 [420871.905625] audit: type=1400 audit(1455799462.947:81): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3600 comm="apparmor_parser" [420871.905634] audit: type=1400 audit(1455799462.947:82): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3600 comm="apparmor_parser" [420871.906202] audit: type=1400 audit(1455799462.947:83): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3600 comm="apparmor_parser" [481025.654403] systemd-hostnamed[8521]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [507458.828662] audit: type=1400 audit(1455886068.305:84): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=12109 comm="apparmor_parser" [507458.828672] audit: type=1400 audit(1455886068.305:85): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=12109 comm="apparmor_parser" [507458.829224] audit: type=1400 audit(1455886068.305:86): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=12109 comm="apparmor_parser" [514185.378346] systemd-hostnamed[12381]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [514250.476017] ata4: exception Emask 0x10 SAct 0x0 SErr 0x10200 action 0xe frozen [514250.476025] ata4: irq_stat 0x00400000, PHY RDY changed [514250.476031] ata4: SError: { Persist PHYRdyChg } [514250.476039] ata4: hard resetting link [514252.706930] ata4: COMRESET failed (errno=-32) [514252.706941] ata4: reset failed (errno=-32), retrying in 8 secs [514260.473202] ata4: hard resetting link [514261.368957] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [514261.370948] ata4.00: supports DRM functions and may not be fully accessible [514261.371047] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [514261.371326] ata4.00: supports DRM functions and may not be fully accessible [514261.371413] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [514261.371486] ata4.00: configured for UDMA/33 [514261.384972] ata4: EH complete [593505.675335] audit: type=1400 audit(1455972133.479:87): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=15117 comm="apparmor_parser" [593505.675345] audit: type=1400 audit(1455972133.479:88): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=15117 comm="apparmor_parser" [593505.675925] audit: type=1400 audit(1455972133.479:89): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=15117 comm="apparmor_parser" [601351.728646] init: upstart-udev-bridge main process (335) terminated with status 1 [601351.728657] init: upstart-udev-bridge main process ended, respawning [601351.728768] init: upstart-socket-bridge main process (628) terminated with status 1 [601351.728776] init: upstart-socket-bridge main process ended, respawning [601351.728891] init: upstart-file-bridge main process (921) terminated with status 1 [601351.728902] init: upstart-file-bridge main process ended, respawning