[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-39-generic (buildd@lcy01-26) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #44~14.04.1-Ubuntu SMP Wed Dec 2 10:00:35 UTC 2015 (Ubuntu 3.19.0-39.44~14.04.1-generic 3.19.8-ckt9) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.19.0-39-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d4457fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d4458000-0x00000000d4932fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d4933000-0x00000000d9324fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9325000-0x00000000d9383fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d9384000-0x00000000d93a6fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d93a7000-0x00000000d9cd6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d9cd7000-0x00000000d9fa2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d9fa3000-0x00000000d9ffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0xd938b000 ACPI 2.0=0xd938b000 SMBIOS=0xf05b0 MPS=0xfd640 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff/NUC5i3RYB, BIOS RYBDWi35.86A.0130.2014.1203.1639 12/03/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x21f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 0080000000 mask 7FC0000000 write-back [ 0.000000] 2 base 00C0000000 mask 7FF0000000 write-back [ 0.000000] 3 base 00D0000000 mask 7FF8000000 write-back [ 0.000000] 4 base 00D8000000 mask 7FFE000000 write-back [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7FE0000000 write-back [ 0.000000] 7 base 021F800000 mask 7FFF800000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3328MB, range: 128MB, type WB [ 0.000000] reg 4, base: 3456MB, range: 32MB, type WB [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB [ 0.000000] reg 6, base: 8GB, range: 512MB, type WB [ 0.000000] reg 7, base: 8696MB, range: 8MB, type UC [ 0.000000] total RAM covered: 8088M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3328MB, range: 128MB, type WB [ 0.000000] reg 4, base: 3456MB, range: 32MB, type WB [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB [ 0.000000] reg 6, base: 8GB, range: 512MB, type WB [ 0.000000] reg 7, base: 8696MB, range: 8MB, type UC [ 0.000000] e820: update [mem 0xda000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02fd4000, 0x02fd4fff] PGTABLE [ 0.000000] BRK [0x02fd5000, 0x02fd5fff] PGTABLE [ 0.000000] BRK [0x02fd6000, 0x02fd6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21f600000-0x21f7fffff] [ 0.000000] [mem 0x21f600000-0x21f7fffff] page 2M [ 0.000000] BRK [0x02fd7000, 0x02fd7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21f5fffff] [ 0.000000] [mem 0x200000000-0x21f5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff] [ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xd4457fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xd43fffff] page 2M [ 0.000000] [mem 0xd4400000-0xd4457fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xd4933000-0xd9324fff] [ 0.000000] [mem 0xd4933000-0xd49fffff] page 4k [ 0.000000] [mem 0xd4a00000-0xd91fffff] page 2M [ 0.000000] [mem 0xd9200000-0xd9324fff] page 4k [ 0.000000] BRK [0x02fd8000, 0x02fd8fff] PGTABLE [ 0.000000] BRK [0x02fd9000, 0x02fd9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xd9fff000-0xd9ffffff] [ 0.000000] [mem 0xd9fff000-0xd9ffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff] [ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G [ 0.000000] RAMDISK: [mem 0x3449e000-0x36246fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000D938B000 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000D938B090 00009C (v01 INTEL NUC5i3RY 00000082 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000D939EDA8 00010C (v05 INTEL NUC5i3RY 00000082 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000D938B1B8 013BEA (v02 INTEL NUC5i3RY 00000082 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000D9CD5F80 000040 [ 0.000000] ACPI: APIC 0x00000000D939EEB8 000084 (v03 INTEL NUC5i3RY 00000082 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000D939EF40 000044 (v01 INTEL NUC5i3RY 00000082 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000D939EF88 00009C (v01 INTEL NUC5i3RY 00000082 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000D939F028 00003C (v01 INTEL NUC5i3RY 00000082 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000D939F068 000038 (v01 INTEL NUC5i3RY 00000082 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000D939F0A0 000315 (v01 INTEL NUC5i3RY 00000082 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000D939F3B8 000042 (v01 INTEL NUC5i3RY 00000082 00000000) [ 0.000000] ACPI: SSDT 0x00000000D939F400 000C7D (v02 INTEL NUC5i3RY 00000082 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000D93A0080 0000A0 (v32 INTEL NUC5i3RY 00000082 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000D93A0120 000539 (v02 INTEL NUC5i3RY 00000082 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000D93A0660 000B74 (v02 INTEL NUC5i3RY 00000082 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000D93A11D8 005BEF (v02 INTEL NUC5i3RY 00000082 INTL 20120913) [ 0.000000] ACPI: DMAR 0x00000000D93A6DC8 0000D4 (v01 INTEL NUC5i3RY 00000082 INTL 00000001) [ 0.000000] ACPI: BGRT 0x00000000D93A6EA0 000038 (v01 INTEL NUC5i3RY 00000082 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21f7f8000-0x21f7fcfff] [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216e00000-ffff88021edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x21f7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00057fff] [ 0.000000] node 0: [mem 0x00059000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xd4457fff] [ 0.000000] node 0: [mem 0xd4933000-0xd9324fff] [ 0.000000] node 0: [mem 0xd9fff000-0xd9ffffff] [ 0.000000] node 0: [mem 0x100000000-0x21f7fffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21f7fffff] [ 0.000000] On node 0 totalpages: 2065896 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 25 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13818 pages used for memmap [ 0.000000] DMA32 zone: 884299 pages, LIFO batch:31 [ 0.000000] Normal zone: 18400 pages used for memmap [ 0.000000] Normal zone: 1177600 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdb800000-0xdf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high dfl lint[0xfd]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x8]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] res edge lint[0x5a]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low dfl lint[0x3]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd4458000-0xd4932fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9325000-0xd9383fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9384000-0xd93a6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd93a7000-0xd9cd6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9cd7000-0xd9fa2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9fa3000-0xd9ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88021f400000 s86144 r8192 d32640 u524288 [ 0.000000] pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2033589 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-39-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7943196K/8263584K available (7921K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 320388K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2095.183 MHz processor [ 0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.36 BogoMIPS (lpj=8380732) [ 0.000033] pid_max: default: 32768 minimum: 301 [ 0.000039] ACPI: Core revision 20141107 [ 0.017913] ACPI: All ACPI Tables successfully acquired [ 0.018722] Security Framework initialized [ 0.018735] AppArmor: AppArmor initialized [ 0.018736] Yama: becoming mindful. [ 0.019290] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.020951] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021655] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.021665] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.021881] Initializing cgroup subsys memory [ 0.021886] Initializing cgroup subsys devices [ 0.021889] Initializing cgroup subsys freezer [ 0.021891] Initializing cgroup subsys net_cls [ 0.021893] Initializing cgroup subsys blkio [ 0.021895] Initializing cgroup subsys perf_event [ 0.021897] Initializing cgroup subsys net_prio [ 0.021899] Initializing cgroup subsys hugetlb [ 0.021924] CPU: Physical Processor ID: 0 [ 0.021925] CPU: Processor Core ID: 0 [ 0.021930] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.021930] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.022990] mce: CPU supports 7 MCE banks [ 0.023002] CPU0: Thermal monitoring enabled (TM1) [ 0.023010] process: using mwait in idle threads [ 0.023014] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.023014] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.023395] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000) [ 0.041439] ftrace: allocating 30026 entries in 118 pages [ 0.054942] dmar: Host address width 39 [ 0.054945] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.054955] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.054957] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.054961] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.054962] dmar: RMRR base: 0x000000d9efc000 end: 0x000000d9f0afff [ 0.054964] dmar: RMRR base: 0x000000db000000 end: 0x000000df7fffff [ 0.054965] dmar: ANDD device: 2 name: \_SB.PCI0.SDHC [ 0.055090] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.055091] HPET id 0 under DRHD base 0xfed91000 [ 0.055092] Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.055093] Your BIOS is broken and requested that x2apic be disabled. [ 0.055093] This will slightly decrease performance. [ 0.055093] Use 'intremap=no_x2apic_optout' to override BIOS request. [ 0.055321] Enabled IRQ remapping in xapic mode [ 0.055322] x2apic not enabled, IRQ remapping is in xapic mode [ 0.055930] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.095636] smpboot: CPU0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (fam: 06, model: 3d, stepping: 04) [ 0.095644] TSC deadline timer enabled [ 0.095668] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.095673] ... version: 3 [ 0.095674] ... bit width: 48 [ 0.095675] ... generic registers: 4 [ 0.095676] ... value mask: 0000ffffffffffff [ 0.095677] ... max period: 0000ffffffffffff [ 0.095678] ... fixed-purpose events: 3 [ 0.095679] ... event mask: 000000070000000f [ 0.096587] x86: Booting SMP configuration: [ 0.096589] .... node #0, CPUs: #1 [ 0.110873] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.110953] #2 #3 [ 0.139536] x86: Booted up 1 node, 4 CPUs [ 0.139539] smpboot: Total of 4 processors activated (16761.46 BogoMIPS) [ 0.143448] devtmpfs: initialized [ 0.145804] evm: security.selinux [ 0.145805] evm: security.SMACK64 [ 0.145806] evm: security.SMACK64EXEC [ 0.145807] evm: security.SMACK64TRANSMUTE [ 0.145808] evm: security.SMACK64MMAP [ 0.145809] evm: security.ima [ 0.145810] evm: security.capability [ 0.145861] PM: Registering ACPI NVS region [mem 0xd93a7000-0xd9cd6fff] (9633792 bytes) [ 0.146107] pinctrl core: initialized pinctrl subsystem [ 0.146208] RTC time: 12:18:04, date: 12/20/15 [ 0.146311] NET: Registered protocol family 16 [ 0.147243] cpuidle: using governor ladder [ 0.151261] cpuidle: using governor menu [ 0.151310] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.151311] ACPI: bus type PCI registered [ 0.151313] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.151380] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.151383] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.151462] PCI: Using configuration type 1 for base access [ 0.155637] ACPI: Added _OSI(Module Device) [ 0.155639] ACPI: Added _OSI(Processor Device) [ 0.155640] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.155641] ACPI: Added _OSI(Processor Aggregator Device) [ 0.161379] ACPI: Executed 18 blocks of module-level executable AML code [ 0.165945] ACPI: Dynamic OEM Table Load: [ 0.165952] ACPI: SSDT 0xFFFF8802157BA400 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.166834] ACPI: Dynamic OEM Table Load: [ 0.166840] ACPI: SSDT 0xFFFF880215763000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.167767] ACPI: Dynamic OEM Table Load: [ 0.167771] ACPI: SSDT 0xFFFF8802157B6A00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.169329] ACPI: Interpreter enabled [ 0.169337] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.169344] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.169358] ACPI: (supports S0 S3 S4 S5) [ 0.169360] ACPI: Using IOAPIC for interrupt routing [ 0.169387] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.171352] ACPI: Power Resource [PG00] (on) [ 0.171718] ACPI: Power Resource [PG01] (on) [ 0.172071] ACPI: Power Resource [PG02] (on) [ 0.181592] ACPI: Power Resource [FN00] (off) [ 0.181665] ACPI: Power Resource [FN01] (off) [ 0.181735] ACPI: Power Resource [FN02] (off) [ 0.181803] ACPI: Power Resource [FN03] (off) [ 0.181872] ACPI: Power Resource [FN04] (off) [ 0.182894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.182900] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.183014] \_SB_.PCI0:_OSC invalid UUID [ 0.183014] _OSC request data:1 1f 0 [ 0.183018] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.183715] PCI host bridge to bus 0000:00 [ 0.183718] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.183720] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.183722] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.183723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.183725] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff] [ 0.183733] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.183828] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.183840] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.183846] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.183851] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.183938] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.183945] pci 0000:00:03.0: reg 0x10: [mem 0xf7134000-0xf7137fff 64bit] [ 0.184052] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.184069] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit] [ 0.184129] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.184179] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.184217] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.184237] pci 0000:00:16.0: reg 0x10: [mem 0xf713d000-0xf713d01f 64bit] [ 0.184307] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.184389] pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000 [ 0.184404] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff] [ 0.184411] pci 0000:00:19.0: reg 0x14: [mem 0xf713b000-0xf713bfff] [ 0.184419] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.184476] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.184525] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.184561] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.184576] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit] [ 0.184628] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.184674] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.184714] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.184793] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.184839] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.184881] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.184961] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.185006] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.185048] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.185067] pci 0000:00:1d.0: reg 0x10: [mem 0xf713a000-0xf713a3ff] [ 0.185155] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.185206] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.185245] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.185422] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.185436] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.185443] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.185450] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.185456] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.185463] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.185469] pci 0000:00:1f.2: reg 0x24: [mem 0xf7139000-0xf71397ff] [ 0.185506] pci 0000:00:1f.2: PME# supported from D3hot [ 0.185574] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.185587] pci 0000:00:1f.3: reg 0x10: [mem 0xf7138000-0xf71380ff 64bit] [ 0.185605] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.185776] acpiphp: Slot [1] registered [ 0.185788] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.186107] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.186191] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit] [ 0.186458] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.186548] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.191495] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.191500] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.192448] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.192498] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.192545] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.192592] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.192637] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.192684] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.192731] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.192777] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.193086] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.193180] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.193182] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.193185] vgaarb: loaded [ 0.193186] vgaarb: bridge control possible 0000:00:02.0 [ 0.193393] SCSI subsystem initialized [ 0.193435] libata version 3.00 loaded. [ 0.193457] ACPI: bus type USB registered [ 0.193473] usbcore: registered new interface driver usbfs [ 0.193480] usbcore: registered new interface driver hub [ 0.193497] usbcore: registered new device driver usb [ 0.193660] PCI: Using ACPI for IRQ routing [ 0.194941] PCI: pci_cache_line_size set to 64 bytes [ 0.195280] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.195282] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.195283] e820: reserve RAM buffer [mem 0xd4458000-0xd7ffffff] [ 0.195284] e820: reserve RAM buffer [mem 0xd9325000-0xdbffffff] [ 0.195286] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff] [ 0.195287] e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff] [ 0.195391] NetLabel: Initializing [ 0.195393] NetLabel: domain hash size = 128 [ 0.195393] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.195405] NetLabel: unlabeled traffic allowed by default [ 0.195465] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.195471] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.197505] Switched to clocksource hpet [ 0.202853] AppArmor: AppArmor Filesystem Enabled [ 0.202914] pnp: PnP ACPI init [ 0.203073] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 0.203076] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203310] pnp 00:01: [dma 0 disabled] [ 0.203337] pnp 00:01: Plug and Play ACPI device, IDs NTN0530 (active) [ 0.203412] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.203414] system 00:02: [io 0xffff] has been reserved [ 0.203416] system 00:02: [io 0xffff] has been reserved [ 0.203417] system 00:02: [io 0xffff] has been reserved [ 0.203419] system 00:02: [io 0x1800-0x18fe] could not be reserved [ 0.203420] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.203423] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203466] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.203499] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.203501] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.203661] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.203663] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.203664] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.203666] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.203668] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.203669] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.203671] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.203673] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.203675] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.203676] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.203678] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.203680] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved [ 0.203682] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.204161] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.204162] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.204164] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.204166] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.204168] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved [ 0.204169] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.204171] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.204590] pnp: PnP ACPI: found 7 devices [ 0.210790] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.210803] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.210808] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.210817] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.210819] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.210820] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.210822] pci_bus 0000:00: resource 7 [mem 0xdf800000-0xfeafffff] [ 0.210823] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff] [ 0.210848] NET: Registered protocol family 2 [ 0.211019] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.211159] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.211270] TCP: Hash tables configured (established 65536 bind 65536) [ 0.211289] TCP: reno registered [ 0.211300] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.211327] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.211377] NET: Registered protocol family 1 [ 0.211391] pci 0000:00:02.0: Video device with shadowed ROM [ 0.229793] PCI: CLS 64 bytes, default 64 [ 0.229846] Trying to unpack rootfs image as initramfs... [ 0.735882] Freeing initrd memory: 30372K (ffff88003449e000 - ffff880036247000) [ 0.735909] dmar: ACPI device "INT3436:00" under DMAR at fed91000 as 00:17.0 [ 0.735920] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.735922] software IO TLB [mem 0xcc94a000-0xd094a000] (64MB) mapped at [ffff8800cc94a000-ffff8800d0949fff] [ 0.736102] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.736155] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x16 [ 0.736163] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x16 [ 0.736170] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x16 [ 0.736177] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x16 [ 0.736227] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.736252] Scanning for low memory corruption every 60 seconds [ 0.736531] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.736547] Initialise system trusted keyring [ 0.736568] audit: initializing netlink subsys (disabled) [ 0.736580] audit: type=2000 audit(1450613884.716:1): initialized [ 0.736882] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.738341] zpool: loaded [ 0.738345] zbud: loaded [ 0.738490] VFS: Disk quotas dquot_6.5.2 [ 0.738521] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.738948] fuse init (API version 7.23) [ 0.739080] Key type big_key registered [ 0.739397] Key type asymmetric registered [ 0.739401] Asymmetric key parser 'x509' registered [ 0.739446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.739480] io scheduler noop registered [ 0.739483] io scheduler deadline registered (default) [ 0.739512] io scheduler cfq registered [ 0.739850] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.739864] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.739898] efifb: probing for efifb [ 0.739918] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 8128k, total 8128k [ 0.739920] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.739921] efifb: scrolling: redraw [ 0.739922] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.740006] Console: switching to colour frame buffer device 240x67 [ 0.740030] fb0: EFI VGA frame buffer device [ 0.740038] intel_idle: MWAIT substates: 0x11142120 [ 0.740039] intel_idle: v0.4 model 0x3D [ 0.740040] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.740328] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.740332] ACPI: Sleep Button [SLPB] [ 0.740365] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.740367] ACPI: Power Button [PWRB] [ 0.740399] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.740401] ACPI: Power Button [PWRF] [ 0.741090] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.741092] ACPI: Thermal Zone [TZ00] (28 C) [ 0.741271] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.741272] ACPI: Thermal Zone [TZ01] (30 C) [ 0.741306] GHES: HEST is not enabled! [ 0.741388] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.761891] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.763265] Linux agpgart interface v0.103 [ 0.764395] brd: module loaded [ 0.764926] loop: module loaded [ 0.765103] libphy: Fixed MDIO Bus: probed [ 0.765106] tun: Universal TUN/TAP device driver, 1.6 [ 0.765107] tun: (C) 1999-2004 Max Krasnyansky [ 0.765144] PPP generic driver version 2.4.2 [ 0.765301] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.765306] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.765394] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.765460] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.765462] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.765464] usb usb1: Product: xHCI Host Controller [ 0.765465] usb usb1: Manufacturer: Linux 3.19.0-39-generic xhci-hcd [ 0.765466] usb usb1: SerialNumber: 0000:00:14.0 [ 0.765561] hub 1-0:1.0: USB hub found [ 0.765573] hub 1-0:1.0: 11 ports detected [ 0.768588] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.768593] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.768622] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.768623] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.768625] usb usb2: Product: xHCI Host Controller [ 0.768626] usb usb2: Manufacturer: Linux 3.19.0-39-generic xhci-hcd [ 0.768628] usb usb2: SerialNumber: 0000:00:14.0 [ 0.768729] hub 2-0:1.0: USB hub found [ 0.768738] hub 2-0:1.0: 4 ports detected [ 0.769878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.769883] ehci-pci: EHCI PCI platform driver [ 0.769984] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.769988] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 0.770000] ehci-pci 0000:00:1d.0: debug port 2 [ 0.773892] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.773903] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf713a000 [ 0.785820] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.785852] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.785853] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.785855] usb usb3: Product: EHCI Host Controller [ 0.785856] usb usb3: Manufacturer: Linux 3.19.0-39-generic ehci_hcd [ 0.785857] usb usb3: SerialNumber: 0000:00:1d.0 [ 0.785970] hub 3-0:1.0: USB hub found [ 0.785975] hub 3-0:1.0: 2 ports detected [ 0.786076] ehci-platform: EHCI generic platform driver [ 0.786085] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.786089] ohci-pci: OHCI PCI platform driver [ 0.786098] ohci-platform: OHCI generic platform driver [ 0.786105] uhci_hcd: USB Universal Host Controller Interface driver [ 0.786146] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.789250] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.789253] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.789456] mousedev: PS/2 mouse device common for all mice [ 0.789708] rtc_cmos 00:03: RTC can wake from S4 [ 0.789851] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.789879] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.789887] i2c /dev entries driver [ 0.789946] device-mapper: uevent: version 1.0.3 [ 0.790009] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 0.790027] Intel P-state driver initializing. [ 0.790129] Consider also installing thermald for improved thermal control. [ 0.790135] ledtrig-cpu: registered to indicate activity on CPUs [ 0.790142] EFI Variables Facility v0.08 2004-May-17 [ 0.793466] PCCT header not found. [ 0.793467] ACPI PCC probe failed. [ 0.793556] TCP: cubic registered [ 0.793647] NET: Registered protocol family 10 [ 0.793847] NET: Registered protocol family 17 [ 0.793862] Key type dns_resolver registered [ 0.794266] Loading compiled-in X.509 certificates [ 0.795086] Loaded X.509 cert 'Magrathea: Glacier signing key: ebbc4f7d1a69d375881e66dfa532d0f61eac585e' [ 0.795101] registered taskstats version 1 [ 0.796803] Key type trusted registered [ 0.799739] Key type encrypted registered [ 0.799748] AppArmor: AppArmor sha1 policy hashing enabled [ 0.799751] ima: No TPM chip found, activating TPM-bypass! [ 0.799772] evm: HMAC attrs: 0x1 [ 0.800291] Magic number: 11:84:330 [ 0.800315] tty tty51: hash matches [ 0.800394] rtc_cmos 00:03: setting system clock to 2015-12-20 12:18:05 UTC (1450613885) [ 0.800461] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.800462] EDD information not available. [ 0.800537] PM: Hibernation image not present or could not be loaded. [ 0.800858] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000) [ 0.800859] Write protecting the kernel read-only data: 12288k [ 0.801073] Freeing unused kernel memory: 260K (ffff8800027bf000 - ffff880002800000) [ 0.801168] Freeing unused kernel memory: 340K (ffff880002bab000 - ffff880002c00000) [ 0.812196] systemd-udevd[120]: starting version 204 [ 0.825492] sdhci: Secure Digital Host Controller Interface driver [ 0.825495] sdhci: Copyright(c) Pierre Ossman [ 0.836994] pps_core: LinuxPPS API ver. 1 registered [ 0.836997] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.838303] PTP clock support registered [ 0.843678] ahci 0000:00:1f.2: version 3.0 [ 0.843898] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode [ 0.843903] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.844741] scsi host0: ahci [ 0.844874] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.844876] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.844895] scsi host1: ahci [ 0.845979] scsi host2: ahci [ 0.846121] scsi host3: ahci [ 0.846315] ata1: DUMMY [ 0.846318] ata2: DUMMY [ 0.846319] ata3: DUMMY [ 0.846324] ata4: SATA max UDMA/133 abar m2048@0xf7139000 port 0xf7139280 irq 43 [ 0.846694] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.859970] AVX2 version of gcm_enc/dec engaged. [ 0.859972] AES CTR mode by8 optimization enabled [ 1.021153] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.021157] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b8:ae:ed:73:be:23 [ 1.021159] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.021186] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.078008] usb 1-3: new low-speed USB device number 2 using xhci_hcd [ 1.098016] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.166057] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.167543] ata4.00: ATA-9: SanDisk SD8SNAT128G1122, Z2201000, max UDMA/133 [ 1.167545] ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.175279] ata4.00: configured for UDMA/133 [ 1.175476] scsi 3:0:0:0: Direct-Access ATA SanDisk SD8SNAT1 1000 PQ: 0 ANSI: 5 [ 1.175808] sd 3:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.175837] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 1.175918] sd 3:0:0:0: [sda] Write Protect is off [ 1.175921] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.176045] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.178697] sda: sda1 sda2 sda3 [ 1.179656] sd 3:0:0:0: [sda] Attached SCSI disk [ 1.230502] usb 3-1: New USB device found, idVendor=8087, idProduct=8001 [ 1.230505] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.230865] hub 3-1:1.0: USB hub found [ 1.230988] hub 3-1:1.0: 8 ports detected [ 1.271212] usb 1-3: New USB device found, idVendor=0a81, idProduct=0205 [ 1.271215] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.271216] usb 1-3: Product: PS2 to USB Converter [ 1.271218] usb 1-3: Manufacturer: CHESEN [ 1.271384] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.271389] usb 1-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.278822] hidraw: raw HID events driver (C) Jiri Kosina [ 1.292665] usbcore: registered new interface driver usbhid [ 1.292667] usbhid: USB HID core driver [ 1.294791] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0A81:0205.0001/input/input6 [ 1.350330] hid-generic 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:14.0-3/input0 [ 1.350475] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0A81:0205.0002/input/input7 [ 1.386165] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.406433] hid-generic 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:14.0-3/input1 [ 1.515408] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608 [ 1.515411] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.515413] usb 1-4: Product: USB2.0 Hub [ 1.515920] hub 1-4:1.0: USB hub found [ 1.516176] hub 1-4:1.0: 4 ports detected [ 1.516694] usb: failed to peer 1-4-port4 and usb2-port4 by location (1-4-port4:none) (usb2-port4:usb1-port4) [ 1.516696] usb 1-4-port4: failed to peer to usb2-port4 (-16) [ 1.516697] usb: port power management may be unreliable [ 1.682318] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 1.734345] tsc: Refined TSC clocksource calibration: 2095.152 MHz [ 1.810913] usb 1-7: No LPM exit latency info found, disabling LPM. [ 1.811789] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a [ 1.811792] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.882416] usb 1-4.2: new high-speed USB device number 5 using xhci_hcd [ 2.188039] usb 1-4.2: New USB device found, idVendor=046d, idProduct=0825 [ 2.188042] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 2.188044] usb 1-4.2: SerialNumber: 136BE8C0 [ 2.258622] usb 1-4.3: new high-speed USB device number 6 using xhci_hcd [ 2.347886] usb 1-4.3: New USB device found, idVendor=05e3, idProduct=0608 [ 2.347890] usb 1-4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.347891] usb 1-4.3: Product: USB2.0 Hub [ 2.348491] hub 1-4.3:1.0: USB hub found [ 2.348751] hub 1-4.3:1.0: 4 ports detected [ 2.618798] usb 1-4.3.3: new full-speed USB device number 7 using xhci_hcd [ 2.708146] usb 1-4.3.3: New USB device found, idVendor=067b, idProduct=2305 [ 2.708149] usb 1-4.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.708151] usb 1-4.3.3: Product: IEEE-1284 Controller [ 2.708153] usb 1-4.3.3: Manufacturer: Pr\xffffffe3\xffffff81\xffffffaf\xffffff81\xffffffaflific Technology Inc. [ 2.734980] Switched to clocksource tsc [ 2.778877] usb 1-4.3.4: new low-speed USB device number 8 using xhci_hcd [ 2.873602] usb 1-4.3.4: New USB device found, idVendor=045e, idProduct=0084 [ 2.873605] usb 1-4.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.873607] usb 1-4.3.4: Product: Basic Optical Mouse [ 2.873609] usb 1-4.3.4: Manufacturer: Microsoft [ 2.873706] usb 1-4.3.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.877120] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-4.3.4:1.0/0003:045E:0084.0003/input/input8 [ 2.877509] hid-generic 0003:045E:0084.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:14.0-4.3.4/input0 [ 21.080021] random: nonblocking pool is initialized [ 27.044922] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 27.044925] EXT4-fs (dm-1): write access will be enabled during recovery [ 27.202488] EXT4-fs (dm-1): recovery complete [ 27.203399] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 27.688077] systemd-udevd[425]: starting version 204 [ 27.728833] lp: driver loaded but no devices found [ 27.737481] ppdev: user-space parallel port driver [ 27.846937] nuvoton-cir 00:01: IR PNP Port not valid! [ 27.847349] nuvoton-cir 00:01: disabled [ 27.879512] [drm] Initialized drm 1.1.0 20060810 [ 27.897641] Bluetooth: Core ver 2.20 [ 27.897660] NET: Registered protocol family 31 [ 27.897662] Bluetooth: HCI device and connection manager initialized [ 27.897667] Bluetooth: HCI socket layer initialized [ 27.897670] Bluetooth: L2CAP socket layer initialized [ 27.897680] Bluetooth: SCO socket layer initialized [ 27.922897] usbcore: registered new interface driver btusb [ 27.924900] [drm] Memory usable by graphics device = 4096M [ 27.924904] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 27.924905] fb: switching to inteldrmfb from EFI VGA [ 27.924935] Console: switching to colour dummy device 80x25 [ 27.924990] [drm] Replacing VGA console driver [ 27.931920] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 27.931923] [drm] Driver supports precise vblank timestamp query. [ 27.932078] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 27.936964] media: Linux media interface: v0.10 [ 27.937464] Bluetooth: hci0: read Intel version: 370810011003110e04 [ 27.937468] Bluetooth: hci0: Intel device is already patched. patch num: 04 [ 27.940298] audit: type=1400 audit(1450613912.622:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=505 comm="apparmor_parser" [ 27.940306] audit: type=1400 audit(1450613912.622:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser" [ 27.940312] audit: type=1400 audit(1450613912.622:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser" [ 27.941034] audit: type=1400 audit(1450613912.622:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser" [ 27.941043] audit: type=1400 audit(1450613912.622:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser" [ 27.941336] audit: type=1400 audit(1450613912.622:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser" [ 27.941608] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 27.943015] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 27.943158] Linux video capture interface: v2.00 [ 27.943374] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 27.943610] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 27.943928] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 27.944026] [drm] Initialized i915_bpo 1.6.0 20150522 for 0000:00:02.0 on minor 0 [ 27.944060] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 27.944179] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 27.946386] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 27.948185] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 27.949987] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 27.951063] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 27.951415] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 27.952253] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 27.977033] sound hdaudioC1D0: autoconfig: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp [ 27.977038] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 27.977041] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 27.977043] sound hdaudioC1D0: mono: mono_out=0x0 [ 27.977045] sound hdaudioC1D0: inputs: [ 27.977047] sound hdaudioC1D0: Mic=0x19 [ 27.984240] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 27.985632] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 27.986926] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo]) [ 27.987021] fbcon: inteldrmfb (fb0) is primary device [ 27.987139] Console: switching to colour frame buffer device 240x67 [ 27.987146] i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 27.987148] i915_bpo 0000:00:02.0: registered panic notifier [ 28.005039] cfg80211: Calling CRDA to update world regulatory domain [ 28.019070] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 28.019164] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 28.020935] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 28.020938] Copyright(c) 2003- 2014 Intel Corporation [ 28.021186] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 28.023705] iwlwifi 0000:02:00.0: Unsupported splx structure [ 28.028027] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 28.028199] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 28.028289] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 28.059188] intel_rapl: Found RAPL domain package [ 28.059194] intel_rapl: Found RAPL domain core [ 28.059197] intel_rapl: Found RAPL domain uncore [ 28.059200] intel_rapl: Found RAPL domain dram [ 28.110786] iwlwifi 0000:02:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm [ 28.148160] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 28.148511] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 28.148964] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 28.172492] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 28.239210] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 28.282687] cfg80211: World regulatory domain updated: [ 28.282691] cfg80211: DFS Master region: unset [ 28.282693] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 28.282696] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 28.282699] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 28.282702] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 28.282704] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 28.282707] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 28.475865] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 28.518977] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 28.629383] init: failsafe main process (811) killed by TERM signal [ 28.749696] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.749701] Bluetooth: BNEP filters: protocol multicast [ 28.749706] Bluetooth: BNEP socket layer initialized [ 28.756696] Bluetooth: RFCOMM TTY layer initialized [ 28.756704] Bluetooth: RFCOMM socket layer initialized [ 28.756711] Bluetooth: RFCOMM ver 1.11 [ 28.802158] audit: type=1400 audit(1450613913.482:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=929 comm="apparmor_parser" [ 28.802165] audit: type=1400 audit(1450613913.482:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=929 comm="apparmor_parser" [ 28.802526] audit: type=1400 audit(1450613913.482:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=929 comm="apparmor_parser" [ 28.868638] init: cups main process (933) killed by HUP signal [ 28.868651] init: cups main process ended, respawning [ 28.887401] audit: type=1400 audit(1450613913.566:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1023 comm="apparmor_parser" [ 29.156152] usb 1-4.2: set resolution quirk: cval->res = 384 [ 29.156439] usbcore: registered new interface driver snd-usb-audio [ 29.156623] uvcvideo: Found UVC 1.00 device (046d:0825) [ 29.172646] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.174600] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/input/input16 [ 29.174791] usbcore: registered new interface driver uvcvideo [ 29.174794] USB Video Class driver (1.1.1) [ 29.233326] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 29.233609] usbcore: registered new interface driver usblp [ 29.389372] init: crashplan main process ended, respawning [ 29.480662] init: crashplan main process (1227) terminated with status 1 [ 29.480676] init: crashplan main process ended, respawning [ 29.548657] init: crashplan main process (1316) terminated with status 1 [ 29.548697] init: crashplan main process ended, respawning [ 29.588780] init: crashplan main process (1361) terminated with status 1 [ 29.588790] init: crashplan main process ended, respawning [ 29.628271] init: crashplan main process (1379) terminated with status 1 [ 29.628283] init: crashplan main process ended, respawning [ 29.663952] init: crashplan main process (1414) terminated with status 1 [ 29.663963] init: crashplan main process ended, respawning [ 29.688183] init: crashplan main process (1432) terminated with status 1 [ 29.688194] init: crashplan main process ended, respawning [ 29.727395] init: crashplan main process (1445) terminated with status 1 [ 29.727405] init: crashplan main process ended, respawning [ 29.761776] init: crashplan main process (1478) terminated with status 1 [ 29.761786] init: crashplan main process ended, respawning [ 29.782360] init: crashplan main process (1490) terminated with status 1 [ 29.782370] init: crashplan main process ended, respawning [ 29.814376] init: crashplan main process (1501) terminated with status 1 [ 29.814390] init: crashplan respawning too fast, stopped [ 30.494971] init: plymouth-upstart-bridge main process ended, respawning [ 30.502842] init: plymouth-upstart-bridge main process (1557) terminated with status 1 [ 30.502857] init: plymouth-upstart-bridge main process ended, respawning [ 31.313257] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 31.317076] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 31.442176] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 31.449761] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 31.452998] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 31.453714] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 31.454121] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 31.697796] ahci 0000:00:1f.2: port does not support device sleep [ 31.849915] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 32.015778] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 32.015788] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 32.015838] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 48.995988] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.006773] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.007484] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.512584] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.515840] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.516551] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.518715] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.519071] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.523052] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.524121] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.524473] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.524838] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.525193] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.525552] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.525911] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.526272] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 49.535155] usb 1-4.2: reset high-speed USB device number 5 using xhci_hcd [ 49.836521] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021184e720 [ 51.115127] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.115476] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.115840] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.116556] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.116914] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.117273] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.117633] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.118716] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.119074] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.120517] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.338344] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.339037] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.339395] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.339755] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.340116] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.341557] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.341915] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.342276] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.345883] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.350262] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.350863] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 51.488267] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 58.877726] audit_printk_skb: 150 callbacks suppressed [ 58.877729] audit: type=1400 audit(1450613942.186:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2896 comm="apparmor_parser" [ 58.877735] audit: type=1400 audit(1450613942.186:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2896 comm="apparmor_parser" [ 58.878097] audit: type=1400 audit(1450613942.186:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2896 comm="apparmor_parser" [ 58.924845] usblp0: removed [ 58.927281] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 63.934261] usblp0: removed [ 63.937210] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 66.960393] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.963251] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.963602] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.965048] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.965400] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.965759] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.966119] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.966479] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.966839] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.967199] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.967559] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.967919] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.968280] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.968638] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.968999] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.969359] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.969720] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.970080] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.970440] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.970800] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.971521] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.971881] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.972243] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.972290] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.972994] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.973715] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.974073] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.974796] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.975155] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.975515] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.975874] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.976598] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.976955] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.977314] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.977674] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.978035] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.978394] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.979116] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.979475] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.979834] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.980197] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.980555] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.980915] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.981276] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.981636] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.981996] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.982356] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.982716] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.983075] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.983435] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 66.983797] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 68.941713] usblp0: removed [ 68.943900] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 73.948435] usblp0: removed [ 73.950916] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 78.955379] usblp0: removed [ 78.957664] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 83.962161] usblp0: removed [ 83.964164] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 88.968691] usblp0: removed [ 88.971660] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 93.976258] usblp0: removed [ 93.978605] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 98.985736] usblp0: removed [ 98.989366] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 103.996796] usblp0: removed [ 104.000913] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 109.008270] usblp0: removed [ 109.010856] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 114.015412] usblp0: removed [ 114.017718] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 119.027064] usblp0: removed [ 119.032985] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 124.038459] usblp0: removed [ 124.041435] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 129.046142] usblp0: removed [ 129.049785] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 134.054399] usblp0: removed [ 134.057343] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 139.062327] usblp0: removed [ 139.065052] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 144.069557] usblp0: removed [ 144.071866] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 149.076585] usblp0: removed [ 149.078941] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 154.084205] usblp0: removed [ 154.088253] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 159.095346] usblp0: removed [ 159.099793] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 164.105037] usblp0: removed [ 164.108459] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 169.115728] usblp0: removed [ 169.119662] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 174.124642] usblp0: removed [ 174.126806] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 179.131537] usblp0: removed [ 179.134876] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 184.142194] usblp0: removed [ 184.145441] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 189.152775] usblp0: removed [ 189.157073] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 194.168021] usblp0: removed [ 194.172496] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 199.178373] usblp0: removed [ 199.180996] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 204.185884] usblp0: removed [ 204.188645] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 209.193110] usblp0: removed [ 209.195596] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 214.200549] usblp0: removed [ 214.202692] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 219.212481] usblp0: removed [ 219.215081] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 224.222374] usblp0: removed [ 224.225546] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 229.230204] usblp0: removed [ 229.232646] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 234.237238] usblp0: removed [ 234.239827] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 239.246039] usblp0: removed [ 239.255357] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 244.264283] usblp0: removed [ 244.266834] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 249.271535] usblp0: removed [ 249.274708] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 254.279298] usblp0: removed [ 254.281530] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 259.286078] usblp0: removed [ 259.288931] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 261.868900] usb 1-4.2: reset high-speed USB device number 5 using xhci_hcd [ 262.174408] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021184e720 [ 264.293460] usblp0: removed [ 264.295708] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 269.300214] usblp0: removed [ 269.302762] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 274.307317] usblp0: removed [ 274.309829] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 279.314342] usblp0: removed [ 279.316819] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 284.321361] usblp0: removed [ 284.323810] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 289.330818] usblp0: removed [ 289.334643] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 294.339290] usblp0: removed [ 294.341777] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 299.348553] usblp0: removed [ 299.351167] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 304.357453] usblp0: removed [ 304.361230] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 309.368849] usblp0: removed [ 309.371919] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 314.377813] usblp0: removed [ 314.381947] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 319.392768] usblp0: removed [ 319.395961] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 324.400899] usblp0: removed [ 324.404418] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 329.410662] usblp0: removed [ 329.415521] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 334.420430] usblp0: removed [ 334.423497] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 339.429703] usblp0: removed [ 339.432074] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 344.437644] usblp0: removed [ 344.440545] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 349.445059] usblp0: removed [ 349.449653] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 354.457136] usblp0: removed [ 354.463099] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 359.472627] usblp0: removed [ 359.475407] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 364.480135] usblp0: removed [ 364.483152] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 369.488184] usblp0: removed [ 369.490777] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 374.495969] usblp0: removed [ 374.499182] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 379.506455] usblp0: removed [ 379.509503] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 384.516777] usblp0: removed [ 384.521238] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 389.531245] usblp0: removed [ 389.534637] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 394.539718] usblp0: removed [ 394.542645] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 399.550082] usblp0: removed [ 399.553259] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 404.560453] usblp0: removed [ 404.564759] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 409.569934] usblp0: removed [ 409.572458] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 414.577001] usblp0: removed [ 414.579200] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 419.586241] usblp0: removed [ 419.590888] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 424.598200] usblp0: removed [ 424.603425] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 429.609445] usblp0: removed [ 429.613101] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 434.618344] usblp0: removed [ 434.622619] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 439.627457] usblp0: removed [ 439.630740] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 444.638342] usblp0: removed [ 444.641646] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 449.646582] usblp0: removed [ 449.649272] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 454.653815] usblp0: removed [ 454.656378] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 459.660830] usblp0: removed [ 459.663362] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 464.667871] usblp0: removed [ 464.670358] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 469.674857] usblp0: removed [ 469.677085] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 474.684131] usblp0: removed [ 474.687522] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 479.692252] usblp0: removed [ 479.696490] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 484.705302] usblp0: removed [ 484.709827] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 489.716987] usblp0: removed [ 489.722194] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 494.730146] usblp0: removed [ 494.734279] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 499.739198] usblp0: removed [ 499.743187] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 504.750389] usblp0: removed [ 504.754792] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 509.762107] usblp0: removed [ 509.767237] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 514.772301] usblp0: removed [ 514.774509] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 519.779026] usblp0: removed [ 519.781206] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 524.787845] usblp0: removed [ 524.791387] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 529.799534] usblp0: removed [ 529.802494] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 534.809605] usblp0: removed [ 534.812924] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 539.818884] usblp0: removed [ 539.821240] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 544.825932] usblp0: removed [ 544.828588] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 549.833058] usblp0: removed [ 549.835375] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 554.839881] usblp0: removed [ 554.842447] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 559.849546] usblp0: removed [ 559.854008] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 564.862023] usblp0: removed [ 564.865921] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 569.874283] usblp0: removed [ 569.877997] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 574.885291] usblp0: removed [ 574.888989] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 579.895119] usblp0: removed [ 579.898543] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 584.905803] usblp0: removed [ 584.909456] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 589.916701] usblp0: removed [ 589.920036] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 594.927257] usblp0: removed [ 594.930860] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 599.936476] usblp0: removed [ 599.942465] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 604.947277] usblp0: removed [ 604.949712] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 609.957620] usblp0: removed [ 609.960955] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 614.968383] usblp0: removed [ 614.971432] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 619.976146] usblp0: removed [ 619.978385] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 624.985526] usblp0: removed [ 624.988560] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 629.993168] usblp0: removed [ 629.995582] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 635.000074] usblp0: removed [ 635.004526] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 640.009509] usblp0: removed [ 640.012095] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 645.016803] usblp0: removed [ 645.020246] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 650.024985] usblp0: removed [ 650.027866] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 655.032589] usblp0: removed [ 655.034949] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 660.039464] usblp0: removed [ 660.042170] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 665.046950] usblp0: removed [ 665.049179] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 670.053708] usblp0: removed [ 670.056912] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 675.062821] usblp0: removed [ 675.065307] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 680.069856] usblp0: removed [ 680.072132] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 685.076705] usblp0: removed [ 685.078821] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 690.084272] usblp0: removed [ 690.086882] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 695.091650] usblp0: removed [ 695.094399] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 700.099296] usblp0: removed [ 700.101605] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 705.108872] usblp0: removed [ 705.111533] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 710.116332] usblp0: removed [ 710.118944] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 715.123399] usblp0: removed [ 715.125697] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 720.130278] usblp0: removed [ 720.133466] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 725.141280] usblp0: removed [ 725.145862] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 730.152070] usblp0: removed [ 730.154863] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 735.159363] usblp0: removed [ 735.162197] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 740.169451] usblp0: removed [ 740.172728] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 745.177653] usblp0: removed [ 745.181230] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 750.186004] usblp0: removed [ 750.188828] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 755.196210] usblp0: removed [ 755.198707] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 760.203842] usblp0: removed [ 760.206074] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 765.213248] usblp0: removed [ 765.216488] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 770.221243] usblp0: removed [ 770.223671] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 775.229296] usblp0: removed [ 775.234026] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 780.238914] usblp0: removed [ 780.243535] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 785.248268] usblp0: removed [ 785.250470] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 790.255015] usblp0: removed [ 790.257249] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 795.261778] usblp0: removed [ 795.264428] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 800.268922] usblp0: removed [ 800.271153] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 805.275905] usblp0: removed [ 805.278710] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 810.283208] usblp0: removed [ 810.285357] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 815.290168] usblp0: removed [ 815.292953] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 820.297741] usblp0: removed [ 820.300626] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 825.305343] usblp0: removed [ 825.307847] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 830.312391] usblp0: removed [ 830.316651] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 835.321609] usblp0: removed [ 835.323802] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 840.329540] usblp0: removed [ 840.334484] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 845.341144] usblp0: removed [ 845.343819] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 850.349701] usblp0: removed [ 850.353223] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 855.357970] usblp0: removed [ 855.359992] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 860.365941] usblp0: removed [ 860.368518] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 865.373082] usblp0: removed [ 865.375486] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 870.379990] usblp0: removed [ 870.382271] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 875.387181] usblp0: removed [ 875.389717] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 880.400907] usblp0: removed [ 880.404114] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 885.408870] usblp0: removed [ 885.411892] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 890.416631] usblp0: removed [ 890.418949] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 895.425009] usblp0: removed [ 895.427502] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 900.432537] usblp0: removed [ 900.435100] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 905.439702] usblp0: removed [ 905.442471] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 910.450112] usblp0: removed [ 910.455258] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 915.461380] usblp0: removed [ 915.463543] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 920.470842] usblp0: removed [ 920.474146] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 925.478667] usblp0: removed [ 925.480696] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 930.485327] usblp0: removed [ 930.490267] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 935.497444] usblp0: removed [ 935.501602] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 940.506218] usblp0: removed [ 940.508734] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 945.513242] usblp0: removed [ 945.515367] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 950.519821] usblp0: removed [ 950.522439] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 955.527141] usblp0: removed [ 955.530077] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 960.534752] usblp0: removed [ 960.537543] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 965.542255] usblp0: removed [ 965.544496] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 970.549769] usblp0: removed [ 970.551940] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 975.557230] usblp0: removed [ 975.559606] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 980.565884] usblp0: removed [ 980.569124] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 985.573667] usblp0: removed [ 985.576239] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 990.580775] usblp0: removed [ 990.583835] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 995.589906] usblp0: removed [ 995.595828] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1000.601511] usblp0: removed [ 1000.604177] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1005.608688] usblp0: removed [ 1005.611450] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1010.616920] usblp0: removed [ 1010.622132] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1015.627654] usblp0: removed [ 1015.630477] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1020.636371] usblp0: removed [ 1020.639827] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1025.644585] usblp0: removed [ 1025.646745] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1030.651498] usblp0: removed [ 1030.654091] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1035.661181] usblp0: removed [ 1035.667235] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1040.672995] usblp0: removed [ 1040.675137] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1045.679639] usblp0: removed [ 1045.681727] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1050.686336] usblp0: removed [ 1050.689300] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1055.694074] usblp0: removed [ 1055.697368] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1060.702595] usblp0: removed [ 1060.704877] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1065.711933] usblp0: removed [ 1065.716594] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1070.724180] usblp0: removed [ 1070.729375] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1075.740607] usblp0: removed [ 1075.744792] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1080.753699] usblp0: removed [ 1080.759467] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1085.767758] usblp0: removed [ 1085.771804] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1090.776793] usblp0: removed [ 1090.780473] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1095.785469] usblp0: removed [ 1095.788537] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1100.793968] usblp0: removed [ 1100.796909] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1105.801910] usblp0: removed [ 1105.804356] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1110.811303] usblp0: removed [ 1110.814976] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1115.822501] usblp0: removed [ 1115.826332] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1120.830952] usblp0: removed [ 1120.833054] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1125.838666] usblp0: removed [ 1125.841944] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1130.846829] usblp0: removed [ 1130.849180] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1135.856180] usblp0: removed [ 1135.860895] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1140.869277] usblp0: removed [ 1140.873327] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1145.878810] usblp0: removed [ 1145.882073] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1150.889333] usblp0: removed [ 1150.893366] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1155.901536] usblp0: removed [ 1155.905789] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1160.911000] usblp0: removed [ 1160.913340] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1165.920458] usblp0: removed [ 1165.923535] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1170.931336] usblp0: removed [ 1170.935202] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1175.940343] usblp0: removed [ 1175.944234] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1180.951524] usblp0: removed [ 1180.954903] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1185.964011] usblp0: removed [ 1185.967383] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1190.972119] usblp0: removed [ 1190.974960] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1195.979707] usblp0: removed [ 1195.982355] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1200.987553] usblp0: removed [ 1200.989633] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1205.994129] usblp0: removed [ 1205.996342] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1211.003800] usblp0: removed [ 1211.007438] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1216.014719] usblp0: removed [ 1216.017947] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1221.025192] usblp0: removed [ 1221.029723] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1226.036677] usblp0: removed [ 1226.040855] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1231.045432] usblp0: removed [ 1231.048303] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1236.052869] usblp0: removed [ 1236.055053] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1241.060839] usblp0: removed [ 1241.063840] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1243.680068] usb 1-4.2: reset high-speed USB device number 5 using xhci_hcd [ 1243.981305] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021184e720 [ 1246.069355] usblp0: removed [ 1246.073226] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1251.077754] usblp0: removed [ 1251.082217] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1256.087473] usblp0: removed [ 1256.090031] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1261.095030] usblp0: removed [ 1261.098040] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1266.103108] usblp0: removed [ 1266.106828] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1271.111437] usblp0: removed [ 1271.114172] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1276.118821] usblp0: removed [ 1276.123005] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1281.127720] usblp0: removed [ 1281.131049] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1286.136685] usblp0: removed [ 1286.143087] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1291.149646] usblp0: removed [ 1291.154128] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1296.158721] usblp0: removed [ 1296.163079] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1298.048211] usb 1-4.2: reset high-speed USB device number 5 using xhci_hcd [ 1298.349725] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021184e720 [ 1301.167571] usblp0: removed [ 1301.170420] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1306.174888] usblp0: removed [ 1306.176977] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1311.181939] usblp0: removed [ 1311.184202] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 1316.188806] usblp0: removed [ 1316.191737] usblp 1-4.3.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305