(apologies for double post, I accidentally pressed "post" before finishing) I have a similar issue on a Dell XPS 13. Bluetooth does not work after suspend, it started happening after upgrade to 13.10. In my case the workaround is to disable wireless using the hardware switch (Fn+F2), then turn it back on. (the similar network-manager workaround reported by the bug opener does not work for me) lspci -v 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 052e Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device 052e Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at 2000 [size=64] Expansion ROM at [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features Kernel driver in use: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 052e Flags: bus master, fast devsel, latency 0, IRQ 42 Memory at f0605000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei_me 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 052e Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f060a000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci-pci 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 052e Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at f0600000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 052e Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: f0500000-f05fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 052e Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: f0400000-f04fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 052e Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 052e Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f0609000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci-pci 00:1f.0 ISA bridge: Intel Corporation QS67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 052e Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c Kernel driver in use: lpc_ich 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 052e Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 47 I/O ports at 2088 [size=8] I/O ports at 2094 [size=4] I/O ports at 2080 [size=8] I/O ports at 2090 [size=4] I/O ports at 2060 [size=32] Memory at f0608000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 052e Flags: medium devsel, IRQ 9 Memory at f0604000 (64-bit, non-prefetchable) [size=256] I/O ports at efa0 [size=32] 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 [Rainbow Peak] (rev 34) Subsystem: Intel Corporation Centrino Advanced-N 6230 AGN Flags: bus master, fast devsel, latency 0, IRQ 50 Memory at f0500000 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [e0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 88-53-2e-ff-ff-f2-1e-f3 Kernel driver in use: iwlwifi 03:00.0 USB controller: Fresco Logic FL1009 USB 3.0 Host Controller (rev 02) (prog-if 30 [XHCI]) Subsystem: Dell Device 052e Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f0400000 (64-bit, non-prefetchable) [size=64K] Memory at f0410000 (64-bit, non-prefetchable) [size=4K] Memory at f0411000 (64-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable+ Count=8 Masked- Capabilities: [100] Advanced Error Reporting Kernel driver in use: xhci_hcd dmesg after suspend [ 382.304820] wlan0: deauthenticating from 00:1f:9f:ef:65:61 by local choice (reason=3) [ 382.341766] cfg80211: Calling CRDA to update world regulatory domain [ 382.350790] cfg80211: World regulatory domain updated: [ 382.350803] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 382.350811] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 382.350819] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 382.350825] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 382.350832] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 382.350837] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 382.833748] PM: Syncing filesystems ... done. [ 382.839340] PM: Preparing system for mem sleep [ 382.839639] Freezing user space processes ... (elapsed 0.081 seconds) done. [ 382.920990] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 382.922261] PM: Entering mem sleep [ 382.922302] Suspending console(s) (use no_console_suspend to debug) [ 382.922494] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 382.922985] sd 0:0:0:0: [sda] Stopping disk [ 383.138192] mei_me 0000:00:16.0: suspend [ 383.572762] PM: suspend of devices complete after 650.387 msecs [ 383.572857] PM: late suspend of devices complete after 0.093 msecs [ 383.573217] xhci_hcd 0000:03:00.0: System wakeup enabled by ACPI [ 383.604782] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 383.620857] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 383.652670] PM: noirq suspend of devices complete after 79.811 msecs [ 383.653560] ACPI: Preparing to enter system sleep state S3 [ 383.654484] PM: Saving platform NVS memory [ 383.655190] Disabling non-boot CPUs ... [ 383.656412] smpboot: CPU 1 is now offline [ 383.760628] smpboot: CPU 2 is now offline [ 383.761086] Broke affinity for irq 9 [ 383.761092] Broke affinity for irq 23 [ 383.761094] Broke affinity for irq 43 [ 383.761096] Broke affinity for irq 44 [ 383.761098] Broke affinity for irq 45 [ 383.761100] Broke affinity for irq 46 [ 383.864671] smpboot: CPU 3 is now offline [ 383.866466] ACPI: Low-level resume complete [ 383.866512] PM: Restoring platform NVS memory [ 383.867383] CPU0: Thermal monitoring handled by SMI [ 383.867409] Enabling non-boot CPUs ... [ 383.867448] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 383.878406] Disabled fast string operations [ 383.878424] CPU1: Thermal monitoring handled by SMI [ 383.880903] CPU1 is up [ 383.880924] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 383.891878] Disabled fast string operations [ 383.891895] CPU2: Thermal monitoring handled by SMI [ 383.894319] CPU2 is up [ 383.894339] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 383.905291] Disabled fast string operations [ 383.905308] CPU3: Thermal monitoring handled by SMI [ 383.907755] CPU3 is up [ 383.912948] ACPI: Waking up from system sleep state S3 [ 383.971065] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 384.003041] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 384.051274] xhci_hcd 0000:03:00.0: System wakeup disabled by ACPI [ 384.051347] PM: noirq resume of devices complete after 126.248 msecs [ 384.051584] PM: early resume of devices complete after 0.108 msecs [ 384.051611] i915 0000:00:02.0: setting latency timer to 64 [ 384.051654] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X [ 384.051805] ahci 0000:00:1f.2: setting latency timer to 64 [ 384.051886] usb usb3: root hub lost power or was reset [ 384.051888] usb usb4: root hub lost power or was reset [ 384.051987] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 384.052049] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 384.052243] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 384.052854] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 384.052883] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 384.052911] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 384.052921] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 384.052950] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X [ 384.071226] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 384.071227] [drm] This can cause pipe underruns and display issues. [ 384.071227] [drm] Please upgrade your BIOS to fix this. [ 384.192101] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input19 [ 384.263049] usb 1-1.5: reset high-speed USB device number 3 using ehci-pci [ 384.370938] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 384.418058] ata1.00: configured for UDMA/133 [ 384.431097] sd 0:0:0:0: [sda] Starting disk [ 384.599143] usb 2-1.5: reset full-speed USB device number 5 using ehci-pci [ 384.898302] PM: resume of devices complete after 846.745 msecs [ 384.898465] PM: Finishing wakeup. [ 384.898466] Restarting tasks ... done. [ 384.899597] video LNXVIDEO:00: Restoring backlight state [ 385.134985] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 385.387179] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 385.393984] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 385.492572] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 391.913890] wlan0: authenticate with 00:1f:9f:ef:65:61 [ 391.919500] wlan0: send auth to 00:1f:9f:ef:65:61 (try 1/3) [ 391.922311] wlan0: authenticated [ 391.926716] wlan0: associate with 00:1f:9f:ef:65:61 (try 1/3) [ 391.930380] wlan0: RX AssocResp from 00:1f:9f:ef:65:61 (capab=0x411 status=0 aid=2) [ 391.934232] wlan0: associated [ 391.934257] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready