[ 0.000000] microcode: microcode updated early to revision 0x71a, date = 2020-03-24 [ 0.000000] Linux version 5.8.0-29-generic (buildd@lgw01-amd64-055) (gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #31-Ubuntu SMP Fri Nov 6 12:37:59 UTC 2020 (Ubuntu 5.8.0-29.31-generic 5.8.14) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.8.0-29-generic root=/dev/mapper/Xen-Root ro enable_mtrr_cleanup mtrr_spare_reg_nr=1 mtrr_gran_size=64K mtrr_chunk_size=32M [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cc117fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cc118000-0x00000000cc3fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cc3fe000-0x00000000cc50bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cc50c000-0x00000000cc72ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cc730000-0x00000000cd742fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cd743000-0x00000000cd743fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cd744000-0x00000000cd7c9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cd7ca000-0x00000000cdc08fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cdc09000-0x00000000cdff3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000102fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x860fc018-0x8610c057] usable ==> usable [ 0.000000] e820: update [mem 0x860fc018-0x8610c057] usable ==> usable [ 0.000000] e820: update [mem 0x860ec018-0x860fb857] usable ==> usable [ 0.000000] e820: update [mem 0x860ec018-0x860fb857] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000860ec017] usable [ 0.000000] reserve setup_data: [mem 0x00000000860ec018-0x00000000860fb857] usable [ 0.000000] reserve setup_data: [mem 0x00000000860fb858-0x00000000860fc017] usable [ 0.000000] reserve setup_data: [mem 0x00000000860fc018-0x000000008610c057] usable [ 0.000000] reserve setup_data: [mem 0x000000008610c058-0x00000000cc117fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cc118000-0x00000000cc3fdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cc3fe000-0x00000000cc50bfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000cc50c000-0x00000000cc72ffff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cc730000-0x00000000cd742fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cd743000-0x00000000cd743fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cd744000-0x00000000cd7c9fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cd7ca000-0x00000000cdc08fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cdc09000-0x00000000cdff3fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cdff4000-0x00000000cdffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000102fffffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xcc434000 SMBIOS=0xf04c0 ACPI=0xcc434000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: System manufacturer System Product Name/P9X79, BIOS 4701 05/06/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3201.954 MHz processor [ 0.001019] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001020] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001025] last_pfn = 0x1030000 max_arch_pfn = 0x400000000 [ 0.001029] MTRR default type: uncachable [ 0.001030] MTRR fixed ranges enabled: [ 0.001031] 00000-9FFFF write-back [ 0.001031] A0000-BFFFF uncachable [ 0.001032] C0000-CFFFF write-protect [ 0.001032] D0000-DFFFF uncachable [ 0.001033] E0000-FFFFF write-protect [ 0.001033] MTRR variable ranges enabled: [ 0.001034] 0 base 000000000000 mask 3FF000000000 write-back [ 0.001035] 1 base 001000000000 mask 3FFFE0000000 write-back [ 0.001036] 2 base 001020000000 mask 3FFFF0000000 write-back [ 0.001037] 3 base 0000CF000000 mask 3FFFFF000000 uncachable [ 0.001037] 4 base 0000D0000000 mask 3FFFF0000000 uncachable [ 0.001038] 5 base 0000E0000000 mask 3FFFE0000000 uncachable [ 0.001038] 6 disabled [ 0.001039] 7 disabled [ 0.001039] 8 disabled [ 0.001039] 9 disabled [ 0.001294] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001655] total RAM covered: 65520M [ 0.001661] gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.001947] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved [ 0.001949] last_pfn = 0xce000 max_arch_pfn = 0x400000000 [ 0.009357] found SMP MP-table at [mem 0x000fd8f0-0x000fd8ff] [ 0.009397] check: Scanning 1 areas for low memory corruption [ 0.009403] Using GB pages for direct mapping [ 0.009826] secureboot: Secure boot disabled [ 0.009827] RAMDISK: [mem 0x39a72000-0x3d07efff] [ 0.009834] ACPI: Early table checksum verification disabled [ 0.009837] ACPI: RSDP 0x00000000CC434000 000024 (v02 ALASKA) [ 0.009841] ACPI: XSDT 0x00000000CC434070 00005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.009846] ACPI: FACP 0x00000000CC43E6C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.009850] ACPI: DSDT 0x00000000CC434168 00A553 (v02 ALASKA A M I 00000016 INTL 20051117) [ 0.009853] ACPI: FACS 0x00000000CC727080 000040 [ 0.009855] ACPI: APIC 0x00000000CC43E7D0 000100 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.009858] ACPI: FPDT 0x00000000CC43E8D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.009861] ACPI: MCFG 0x00000000CC43E918 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097) [ 0.009863] ACPI: HPET 0x00000000CC43E958 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.009866] ACPI: DMAR 0x00000000CC50BB10 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.009868] ACPI: SSDT 0x00000000CC43E9E8 0CD128 (v02 INTEL CpuPm 00004000 INTL 20051117) [ 0.009876] ACPI: Local APIC address 0xfee00000 [ 0.009916] No NUMA configuration found [ 0.009917] Faking a node at [mem 0x0000000000000000-0x000000102fffffff] [ 0.009928] NODE_DATA(0) allocated [mem 0x102ffd6000-0x102fffffff] [ 0.010344] Zone ranges: [ 0.010345] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010346] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.010347] Normal [mem 0x0000000100000000-0x000000102fffffff] [ 0.010348] Device empty [ 0.010349] Movable zone start for each node [ 0.010352] Early memory node ranges [ 0.010353] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.010354] node 0: [mem 0x0000000000100000-0x00000000cc117fff] [ 0.010355] node 0: [mem 0x00000000cd743000-0x00000000cd743fff] [ 0.010356] node 0: [mem 0x00000000cd7ca000-0x00000000cdc08fff] [ 0.010356] node 0: [mem 0x00000000cdff4000-0x00000000cdffffff] [ 0.010357] node 0: [mem 0x0000000100000000-0x000000102fffffff] [ 0.010498] Zeroed struct page in unavailable ranges: 15101 pages [ 0.010499] Initmem setup node 0 [mem 0x0000000000001000-0x000000102fffffff] [ 0.010501] On node 0 totalpages: 16762115 [ 0.010502] DMA zone: 64 pages used for memmap [ 0.010502] DMA zone: 24 pages reserved [ 0.010503] DMA zone: 3999 pages, LIFO batch:0 [ 0.010525] DMA32 zone: 13014 pages used for memmap [ 0.010525] DMA32 zone: 832868 pages, LIFO batch:63 [ 0.014834] Normal zone: 248832 pages used for memmap [ 0.014836] Normal zone: 15925248 pages, LIFO batch:63 [ 0.096903] ACPI: PM-Timer IO Port: 0x408 [ 0.096906] ACPI: Local APIC address 0xfee00000 [ 0.096914] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.096915] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.096916] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.096916] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.096917] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.096918] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.096918] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.096919] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.096920] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.096920] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.096921] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.096922] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.096933] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.096936] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.096939] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.096940] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.096942] ACPI: IRQ0 used by override. [ 0.096942] ACPI: IRQ9 used by override. [ 0.096944] Using ACPI (MADT) for SMP configuration information [ 0.096946] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.096950] TSC deadline timer available [ 0.096952] smpboot: Allowing 12 CPUs, 0 hotplug CPUs [ 0.096971] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.096973] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.096975] PM: hibernation: Registered nosave memory: [mem 0x860ec000-0x860ecfff] [ 0.096976] PM: hibernation: Registered nosave memory: [mem 0x860fb000-0x860fbfff] [ 0.096977] PM: hibernation: Registered nosave memory: [mem 0x860fc000-0x860fcfff] [ 0.096979] PM: hibernation: Registered nosave memory: [mem 0x8610c000-0x8610cfff] [ 0.096981] PM: hibernation: Registered nosave memory: [mem 0xcc118000-0xcc3fdfff] [ 0.096981] PM: hibernation: Registered nosave memory: [mem 0xcc3fe000-0xcc50bfff] [ 0.096982] PM: hibernation: Registered nosave memory: [mem 0xcc50c000-0xcc72ffff] [ 0.096983] PM: hibernation: Registered nosave memory: [mem 0xcc730000-0xcd742fff] [ 0.096985] PM: hibernation: Registered nosave memory: [mem 0xcd744000-0xcd7c9fff] [ 0.096986] PM: hibernation: Registered nosave memory: [mem 0xcdc09000-0xcdff3fff] [ 0.096988] PM: hibernation: Registered nosave memory: [mem 0xce000000-0xdfffffff] [ 0.096989] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.096989] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfed1bfff] [ 0.096990] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.096991] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff] [ 0.096992] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.096993] [mem 0xce000000-0xdfffffff] available for PCI devices [ 0.096995] Booting paravirtualized kernel on bare hardware [ 0.096998] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.097006] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 [ 0.097364] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144 [ 0.097371] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152 [ 0.097371] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- [ 0.097402] Built 1 zonelists, mobility grouping on. Total pages: 16500181 [ 0.097403] Policy zone: Normal [ 0.097404] Kernel command line: BOOT_IMAGE=/vmlinuz-5.8.0-29-generic root=/dev/mapper/Xen-Root ro enable_mtrr_cleanup mtrr_spare_reg_nr=1 mtrr_gran_size=64K mtrr_chunk_size=32M [ 0.101774] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.103986] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.104094] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.247342] Memory: 65514028K/67048460K available (14339K kernel code, 2535K rwdata, 8792K rodata, 2636K init, 4924K bss, 1534432K reserved, 0K cma-reserved) [ 0.247349] random: get_random_u64 called from kmem_cache_open+0x2b/0x240 with crng_init=0 [ 0.247469] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.247482] Kernel/User page tables isolation: enabled [ 0.247502] ftrace: allocating 48582 entries in 190 pages [ 0.262866] ftrace: allocated 190 pages with 6 groups [ 0.262978] rcu: Hierarchical RCU implementation. [ 0.262980] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12. [ 0.262981] Trampoline variant of Tasks RCU enabled. [ 0.262981] Rude variant of Tasks RCU enabled. [ 0.262982] Tracing variant of Tasks RCU enabled. [ 0.262983] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.262983] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.266009] NR_IRQS: 524544, nr_irqs: 928, preallocated irqs: 16 [ 0.266245] Console: colour dummy device 80x25 [ 0.266424] printk: console [tty0] enabled [ 0.266440] ACPI: Core revision 20200528 [ 0.267057] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.267069] APIC: Switch to symmetric I/O mode setup [ 0.267071] DMAR: Host address width 46 [ 0.267073] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 0.267078] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020fe [ 0.267081] DMAR: RMRR base: 0x000000cc3d4000 end: 0x000000cc3e0fff [ 0.267083] DMAR: ATSR flags: 0x0 [ 0.267084] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 0.267087] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 0.267089] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 0.267090] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 0.267092] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.267336] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.267338] x2apic enabled [ 0.267345] Switched APIC routing to cluster x2apic. [ 0.267835] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.287070] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e277fdea12, max_idle_ns: 440795357111 ns [ 0.287075] Calibrating delay loop (skipped), value calculated using timer frequency.. 6403.90 BogoMIPS (lpj=12807816) [ 0.287078] pid_max: default: 32768 minimum: 301 [ 0.293440] LSM: Security Framework initializing [ 0.293449] Yama: becoming mindful. [ 0.293472] AppArmor: AppArmor initialized [ 0.293602] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.293707] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.293947] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.293976] process: using mwait in idle threads [ 0.293978] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.293980] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.293984] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.293987] Spectre V2 : Mitigation: Full generic retpoline [ 0.293988] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.293990] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.293992] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.293994] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.293997] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.294001] MDS: Mitigation: Clear CPU buffers [ 0.294169] Freeing SMP alternatives memory: 40K [ 0.299151] smpboot: CPU0: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (family: 0x6, model: 0x2d, stepping: 0x7) [ 0.299246] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.299254] ... version: 3 [ 0.299256] ... bit width: 48 [ 0.299257] ... generic registers: 4 [ 0.299259] ... value mask: 0000ffffffffffff [ 0.299260] ... max period: 00007fffffffffff [ 0.299262] ... fixed-purpose events: 3 [ 0.299263] ... event mask: 000000070000000f [ 0.299298] rcu: Hierarchical SRCU implementation. [ 0.300190] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.300291] smp: Bringing up secondary CPUs ... [ 0.300394] x86: Booting SMP configuration: [ 0.300396] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 [ 0.317755] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.317755] #7 #8 #9 #10 #11 [ 0.327133] smp: Brought up 1 node, 12 CPUs [ 0.327133] smpboot: Max logical packages: 1 [ 0.327133] smpboot: Total of 12 processors activated (76846.89 BogoMIPS) [ 0.332820] devtmpfs: initialized [ 0.332820] x86/mm: Memory block size: 256MB [ 0.333108] PM: Registering ACPI NVS region [mem 0xcc50c000-0xcc72ffff] (2244608 bytes) [ 0.333108] PM: Registering ACPI NVS region [mem 0xcd744000-0xcd7c9fff] (548864 bytes) [ 0.335132] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.335132] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.335187] pinctrl core: initialized pinctrl subsystem [ 0.335275] PM: RTC time: 04:41:52, date: 2020-11-17 [ 0.335278] thermal_sys: Registered thermal governor 'fair_share' [ 0.335278] thermal_sys: Registered thermal governor 'bang_bang' [ 0.335280] thermal_sys: Registered thermal governor 'step_wise' [ 0.335282] thermal_sys: Registered thermal governor 'user_space' [ 0.335283] thermal_sys: Registered thermal governor 'power_allocator' [ 0.335405] NET: Registered protocol family 16 [ 0.335799] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.336135] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.336522] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.336541] audit: initializing netlink subsys (disabled) [ 0.336570] audit: type=2000 audit(1605588112.068:1): state=initialized audit_enabled=0 res=1 [ 0.336570] EISA bus registered [ 0.336570] cpuidle: using governor ladder [ 0.336570] cpuidle: using governor menu [ 0.336570] ACPI: bus type PCI registered [ 0.336570] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.336570] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.336570] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.336570] PCI: Using configuration type 1 for base access [ 0.336570] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.336570] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.339194] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.339194] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.339194] fbcon: Taking over console [ 0.339194] ACPI: Added _OSI(Module Device) [ 0.339194] ACPI: Added _OSI(Processor Device) [ 0.339194] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.339194] ACPI: Added _OSI(Processor Aggregator Device) [ 0.339194] ACPI: Added _OSI(Linux-Dell-Video) [ 0.339194] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.339194] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.500343] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.523564] ACPI: EC: EC started [ 0.523569] ACPI: EC: interrupt blocked [ 0.523593] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.523596] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 0.523598] ACPI: Interpreter enabled [ 0.523615] ACPI: (supports S0 S3 S4 S5) [ 0.523617] ACPI: Using IOAPIC for interrupt routing [ 0.523652] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.524226] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.542841] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.542848] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.543088] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR] [ 0.543315] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.543692] PCI host bridge to bus 0000:00 [ 0.543696] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.543698] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.543700] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.543702] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.543705] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.543707] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.543709] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window] [ 0.543712] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.543725] pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000 [ 0.543801] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.543904] pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400 [ 0.543994] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.544126] pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400 [ 0.544214] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.544338] pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400 [ 0.544380] pci 0000:00:03.0: enabling Extended Tags [ 0.544430] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.544556] pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000 [ 0.544689] pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000 [ 0.544817] pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020 [ 0.544832] pci 0000:00:05.4: reg 0x10: [mem 0xfbf2a000-0xfbf2afff] [ 0.544964] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 0.545069] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 0.545186] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 0.545211] pci 0000:00:16.0: reg 0x10: [mem 0xfbf29000-0xfbf2900f 64bit] [ 0.545281] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.545368] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.545387] pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff] [ 0.545395] pci 0000:00:19.0: reg 0x14: [mem 0xfbf28000-0xfbf28fff] [ 0.545403] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f] [ 0.545458] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.545555] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 0.545576] pci 0000:00:1a.0: reg 0x10: [mem 0xfbf27000-0xfbf273ff] [ 0.545655] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.545750] pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300 [ 0.545769] pci 0000:00:1b.0: reg 0x10: [mem 0xfbf20000-0xfbf23fff 64bit] [ 0.545832] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.545917] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 0.546007] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.546115] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 0.546205] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.546310] pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400 [ 0.546399] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.546507] pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400 [ 0.546597] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.546700] pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400 [ 0.546790] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.546896] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 0.546917] pci 0000:00:1d.0: reg 0x10: [mem 0xfbf26000-0xfbf263ff] [ 0.546996] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.547090] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.547229] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 0.547415] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 0.547432] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097] [ 0.547439] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083] [ 0.547446] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077] [ 0.547454] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063] [ 0.547461] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.547468] pci 0000:00:1f.2: reg 0x24: [mem 0xfbf25000-0xfbf257ff] [ 0.547506] pci 0000:00:1f.2: PME# supported from D3hot [ 0.547594] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 0.547612] pci 0000:00:1f.3: reg 0x10: [mem 0xfbf24000-0xfbf240ff 64bit] [ 0.547631] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.547759] pci 0000:00:01.0: PCI bridge to [bus 03] [ 0.547802] pci 0000:01:00.0: [1002:679a] type 00 class 0x030000 [ 0.547816] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.547823] pci 0000:01:00.0: reg 0x18: [mem 0xfbe00000-0xfbe3ffff 64bit] [ 0.547828] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.547837] pci 0000:01:00.0: reg 0x30: [mem 0xfbe40000-0xfbe5ffff pref] [ 0.547842] pci 0000:01:00.0: enabling Extended Tags [ 0.547851] pci 0000:01:00.0: BAR 0: assigned to efifb [ 0.547876] pci 0000:01:00.0: supports D1 D2 [ 0.547878] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.547934] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300 [ 0.547945] pci 0000:01:00.1: reg 0x10: [mem 0xfbe60000-0xfbe63fff 64bit] [ 0.547961] pci 0000:01:00.1: enabling Extended Tags [ 0.547988] pci 0000:01:00.1: supports D1 D2 [ 0.548033] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.548037] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.548040] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.548045] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.548077] pci 0000:00:03.0: PCI bridge to [bus 02] [ 0.548122] pci 0000:00:11.0: PCI bridge to [bus 04] [ 0.548166] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 0.548230] pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.548271] pci 0000:06:00.0: reg 0x10: [mem 0xfbd00000-0xfbd07fff 64bit] [ 0.548432] pci 0000:06:00.0: PME# supported from D3hot D3cold [ 0.548535] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 0.548541] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.548601] pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.548642] pci 0000:07:00.0: reg 0x10: [mem 0xfbc00000-0xfbc07fff 64bit] [ 0.548802] pci 0000:07:00.0: PME# supported from D3hot D3cold [ 0.548903] pci 0000:00:1c.3: PCI bridge to [bus 07] [ 0.548909] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.548969] pci 0000:08:00.0: [1b21:0612] type 00 class 0x010601 [ 0.548998] pci 0000:08:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.549012] pci 0000:08:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.549025] pci 0000:08:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.549038] pci 0000:08:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.549052] pci 0000:08:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.549065] pci 0000:08:00.0: reg 0x24: [mem 0xfbb00000-0xfbb001ff] [ 0.549238] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.549242] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.549246] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.549302] pci 0000:09:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.549342] pci 0000:09:00.0: reg 0x10: [mem 0xfba00000-0xfba007ff 64bit] [ 0.549357] pci 0000:09:00.0: reg 0x18: [io 0xc000-0xc0ff] [ 0.549486] pci 0000:09:00.0: supports D2 [ 0.549488] pci 0000:09:00.0: PME# supported from D2 D3hot D3cold [ 0.559112] pci 0000:00:1c.5: PCI bridge to [bus 09] [ 0.559121] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.559139] pci 0000:00:1c.5: bridge window [mem 0xfba00000-0xfbafffff] [ 0.559159] pci_bus 0000:0a: extended config space not accessible [ 0.559207] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode) [ 0.559216] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.559218] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.559221] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.559223] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.559226] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.559228] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.559230] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode) [ 0.559800] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.559805] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.559836] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.559902] PCI host bridge to bus 0000:ff [ 0.559905] pci_bus 0000:ff: root bus resource [bus ff] [ 0.559915] pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000 [ 0.559964] pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000 [ 0.560024] pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000 [ 0.560092] pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000 [ 0.560138] pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000 [ 0.560195] pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000 [ 0.560259] pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000 [ 0.560296] pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000 [ 0.560334] pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000 [ 0.560372] pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000 [ 0.560410] pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000 [ 0.560449] pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000 [ 0.560485] pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000 [ 0.560520] pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000 [ 0.560556] pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000 [ 0.560595] pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000 [ 0.560631] pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000 [ 0.560668] pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000 [ 0.560704] pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000 [ 0.560743] pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000 [ 0.560779] pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000 [ 0.560816] pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000 [ 0.560854] pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100 [ 0.560896] pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000 [ 0.560946] pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000 [ 0.560998] pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000 [ 0.561048] pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000 [ 0.561102] pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000 [ 0.561153] pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000 [ 0.561203] pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000 [ 0.561244] pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000 [ 0.561296] pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000 [ 0.561347] pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000 [ 0.561399] pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000 [ 0.561449] pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000 [ 0.561507] pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000 [ 0.561559] pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000 [ 0.561611] pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000 [ 0.561660] pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000 [ 0.561703] pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000 [ 0.561739] pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100 [ 0.561779] pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100 [ 0.561815] pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100 [ 0.561854] pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000 [ 0.562019] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.562088] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.562157] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15) [ 0.562224] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 *14 15) [ 0.562291] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.562357] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.562425] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.562491] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.568203] ACPI: EC: interrupt unblocked [ 0.568206] ACPI: EC: event unblocked [ 0.568211] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.568212] ACPI: EC: GPE=0x1e [ 0.568215] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete [ 0.568217] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 0.568317] iommu: Default domain type: Translated [ 0.568317] SCSI subsystem initialized [ 0.568317] libata version 3.00 loaded. [ 0.568317] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.568317] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.568317] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.568317] vgaarb: loaded [ 0.568317] ACPI: bus type USB registered [ 0.568317] usbcore: registered new interface driver usbfs [ 0.568317] usbcore: registered new interface driver hub [ 0.568317] usbcore: registered new device driver usb [ 0.568317] pps_core: LinuxPPS API ver. 1 registered [ 0.568317] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.568317] PTP clock support registered [ 0.568317] EDAC MC: Ver: 3.0.0 [ 0.568317] Registered efivars operations [ 0.568317] NetLabel: Initializing [ 0.568317] NetLabel: domain hash size = 128 [ 0.568317] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.568317] NetLabel: unlabeled traffic allowed by default [ 0.568317] PCI: Using ACPI for IRQ routing [ 0.574933] PCI: pci_cache_line_size set to 64 bytes [ 0.575030] e820: reserve RAM buffer [mem 0x860ec018-0x87ffffff] [ 0.575031] e820: reserve RAM buffer [mem 0x860fc018-0x87ffffff] [ 0.575032] e820: reserve RAM buffer [mem 0xcc118000-0xcfffffff] [ 0.575033] e820: reserve RAM buffer [mem 0xcd744000-0xcfffffff] [ 0.575033] e820: reserve RAM buffer [mem 0xcdc09000-0xcfffffff] [ 0.575034] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff] [ 0.575739] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.575744] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.577780] clocksource: Switched to clocksource tsc-early [ 0.587651] VFS: Disk quotas dquot_6.6.0 [ 0.587673] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.587781] AppArmor: AppArmor Filesystem Enabled [ 0.587807] pnp: PnP ACPI init [ 0.587975] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 0.587978] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 0.587980] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 0.587982] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 0.587985] system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 0.587987] system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved [ 0.587990] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.587996] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.588103] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 0.588109] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.588246] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.588252] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.588279] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.588358] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.588364] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.588617] pnp 00:05: [dma 0 disabled] [ 0.588657] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.588928] system 00:06: [io 0x0400-0x0453] has been reserved [ 0.588932] system 00:06: [io 0x0458-0x047f] has been reserved [ 0.588934] system 00:06: [io 0x1180-0x119f] has been reserved [ 0.588936] system 00:06: [io 0x0500-0x057f] has been reserved [ 0.588939] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.588941] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.588944] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.588948] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.589043] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.589048] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.589484] pnp: PnP ACPI: found 8 devices [ 0.595123] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.595177] NET: Registered protocol family 2 [ 0.595389] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.595802] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.596441] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.596524] TCP: Hash tables configured (established 524288 bind 65536) [ 0.596719] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.596921] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.597081] NET: Registered protocol family 1 [ 0.597087] NET: Registered protocol family 44 [ 0.597108] pci 0000:00:01.0: PCI bridge to [bus 03] [ 0.597118] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.597121] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.597125] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.597129] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.597134] pci 0000:00:03.0: PCI bridge to [bus 02] [ 0.597143] pci 0000:00:11.0: PCI bridge to [bus 04] [ 0.597155] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 0.597165] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 0.597170] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.597177] pci 0000:00:1c.3: PCI bridge to [bus 07] [ 0.597182] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.597190] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.597193] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.597197] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.597205] pci 0000:00:1c.5: PCI bridge to [bus 09] [ 0.597208] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.597212] pci 0000:00:1c.5: bridge window [mem 0xfba00000-0xfbafffff] [ 0.597220] pci 0000:00:1e.0: PCI bridge to [bus 0a] [ 0.597230] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.597232] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.597234] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.597236] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.597238] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.597240] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.597242] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window] [ 0.597244] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.597246] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.597248] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.597251] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.597253] pci_bus 0000:07: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.597255] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.597257] pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.597259] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.597261] pci_bus 0000:09: resource 1 [mem 0xfba00000-0xfbafffff] [ 0.597263] pci_bus 0000:0a: resource 4 [io 0x0000-0x03af window] [ 0.597265] pci_bus 0000:0a: resource 5 [io 0x03e0-0x0cf7 window] [ 0.597267] pci_bus 0000:0a: resource 6 [io 0x03b0-0x03df window] [ 0.597268] pci_bus 0000:0a: resource 7 [io 0x0d00-0xffff window] [ 0.597270] pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.597272] pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.597274] pci_bus 0000:0a: resource 10 [mem 0xd0000000-0xffffffff window] [ 0.597358] pci 0000:00:05.0: disabled boot interrupts on device [8086:3c28] [ 0.619207] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x114 took 21319 usecs [ 0.643200] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x114 took 23411 usecs [ 0.643218] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.643226] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.643633] PCI: CLS 64 bytes, default 64 [ 0.643684] Trying to unpack rootfs image as initramfs... [ 0.764929] Initramfs unpacking failed: Decoding failed [ 0.770878] Freeing initrd memory: 55348K [ 0.795144] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.795147] software IO TLB: mapped [mem 0xb9d26000-0xbdd26000] (64MB) [ 0.795541] check: Scanning for low memory corruption every 60 seconds [ 0.796070] Initialise system trusted keyrings [ 0.796083] Key type blacklist registered [ 0.796110] workingset: timestamp_bits=36 max_order=24 bucket_order=0 [ 0.797231] zbud: loaded [ 0.797462] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.797591] fuse: init (API version 7.31) [ 0.797717] integrity: Platform Keyring initialized [ 0.806547] Key type asymmetric registered [ 0.806549] Asymmetric key parser 'x509' registered [ 0.806557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.806599] io scheduler mq-deadline registered [ 0.808129] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.808187] efifb: probing for efifb [ 0.808209] efifb: No BGRT, not showing boot graphics [ 0.808211] efifb: framebuffer at 0xd0000000, using 8100k, total 8100k [ 0.808213] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.808214] efifb: scrolling: redraw [ 0.808216] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.808290] Console: switching to colour frame buffer device 240x67 [ 0.811748] fb0: EFI VGA frame buffer device [ 0.811768] intel_idle: MWAIT substates: 0x21120 [ 0.811875] Monitor-Mwait will be used to enter C-1 state [ 0.811881] Monitor-Mwait will be used to enter C-2 state [ 0.811886] ACPI: \_SB_.C000: Found 2 idle states [ 0.811901] intel_idle: v0.5.1 model 0x2D [ 0.812326] intel_idle: Local APIC timer is reliable in all C-states [ 0.812445] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.812501] ACPI: Power Button [PWRB] [ 0.812551] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.812594] ACPI: Power Button [PWRF] [ 0.829947] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.850463] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.852262] Linux agpgart interface v0.103 [ 0.855057] loop: module loaded [ 0.855359] libphy: Fixed MDIO Bus: probed [ 0.855373] tun: Universal TUN/TAP device driver, 1.6 [ 0.855409] PPP generic driver version 2.4.2 [ 0.855460] VFIO - User Level meta-driver version: 0.3 [ 0.855559] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.855580] ehci-pci: EHCI PCI platform driver [ 0.855721] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.855743] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.855778] ehci-pci 0000:00:1a.0: debug port 2 [ 0.859688] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.859720] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfbf27000 [ 0.875130] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.875209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.875233] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.875254] usb usb1: Product: EHCI Host Controller [ 0.875269] usb usb1: Manufacturer: Linux 5.8.0-29-generic ehci_hcd [ 0.875287] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.875504] hub 1-0:1.0: USB hub found [ 0.875524] hub 1-0:1.0: 2 ports detected [ 0.875740] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.875760] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.875790] ehci-pci 0000:00:1d.0: debug port 2 [ 0.879709] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.879731] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf26000 [ 0.895126] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.895203] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.895227] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.895248] usb usb2: Product: EHCI Host Controller [ 0.895263] usb usb2: Manufacturer: Linux 5.8.0-29-generic ehci_hcd [ 0.895280] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.895489] hub 2-0:1.0: USB hub found [ 0.895509] hub 2-0:1.0: 2 ports detected [ 0.896565] ehci-platform: EHCI generic platform driver [ 0.897518] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.898468] ohci-pci: OHCI PCI platform driver [ 0.899435] ohci-platform: OHCI generic platform driver [ 0.900387] uhci_hcd: USB Universal Host Controller Interface driver [ 0.901370] i8042: PNP: No PS/2 controller found. [ 0.902564] mousedev: PS/2 mouse device common for all mice [ 0.903846] rtc_cmos 00:03: RTC can wake from S4 [ 0.905087] rtc_cmos 00:03: registered as rtc0 [ 0.906087] rtc_cmos 00:03: setting system clock to 2020-11-17T04:41:52 UTC (1605588112) [ 0.907051] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.908020] i2c /dev entries driver [ 0.909015] device-mapper: uevent: version 1.0.3 [ 0.910060] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com [ 0.911046] platform eisa.0: Probing EISA bus 0 [ 0.912017] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.912984] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.913946] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.914895] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.915842] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.916777] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.917704] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.918625] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.919545] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.920452] platform eisa.0: EISA: Detected 0 cards [ 0.921353] intel_pstate: Intel P-state driver initializing [ 0.923283] ledtrig-cpu: registered to indicate activity on CPUs [ 0.925494] EFI Variables Facility v0.08 2004-May-17 [ 0.934739] drop_monitor: Initializing network drop monitor service [ 0.936250] NET: Registered protocol family 10 [ 0.952874] Segment Routing with IPv6 [ 0.953778] NET: Registered protocol family 17 [ 0.954887] Key type dns_resolver registered [ 0.957743] microcode: sig=0x206d7, pf=0x4, revision=0x71a [ 0.958839] microcode: Microcode Update Driver: v2.2. [ 0.958848] IPI shorthand broadcast: enabled [ 0.960651] sched_clock: Marking stable (958901096, 869208)->(975342281, -15571977) [ 0.961702] registered taskstats version 1 [ 0.962606] Loading compiled-in X.509 certificates [ 0.964783] Loaded X.509 cert 'Build time autogenerated kernel key: 15c00c29bbf796c8dcbdbc1cf3a4ec5ff4970fdd' [ 0.965733] zswap: loaded using pool lzo/zbud [ 0.966830] Key type ._fscrypt registered [ 0.967733] Key type .fscrypt registered [ 0.968622] Key type fscrypt-provisioning registered [ 0.972554] Key type encrypted registered [ 0.973471] AppArmor: AppArmor sha1 policy hashing enabled [ 0.974616] integrity: Loading X.509 certificate: UEFI:db [ 0.976128] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' [ 0.977033] integrity: Loading X.509 certificate: UEFI:db [ 0.978139] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' [ 0.979062] integrity: Loading X.509 certificate: UEFI:db [ 0.980015] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.980963] integrity: Loading X.509 certificate: UEFI:db [ 0.981931] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.982907] integrity: Loading X.509 certificate: UEFI:db [ 0.984101] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.985340] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.986392] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469' [ 0.987409] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.988631] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.990404] ima: No TPM chip found, activating TPM-bypass! [ 0.991449] ima: Allocated hash algorithm: sha1 [ 0.992475] ima: No architecture policies found [ 0.993498] evm: Initialising EVM extended attributes: [ 0.994521] evm: security.selinux [ 0.995542] evm: security.SMACK64 [ 0.996559] evm: security.SMACK64EXEC [ 0.997567] evm: security.SMACK64TRANSMUTE [ 0.998565] evm: security.SMACK64MMAP [ 0.999561] evm: security.apparmor [ 1.000545] evm: security.ima [ 1.001519] evm: security.capability [ 1.002482] evm: HMAC attrs: 0x1 [ 1.003812] PM: Magic number: 12:861:666 [ 1.004817] acpi LNXCPU:15: hash matches [ 1.005970] RAS: Correctable Errors collector initialized. [ 1.008232] Freeing unused decrypted memory: 2040K [ 1.009601] Freeing unused kernel image (initmem) memory: 2636K [ 1.043136] Write protecting the kernel read-only data: 26624k [ 1.046691] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 1.049745] Freeing unused kernel image (rodata/data gap) memory: 1448K [ 1.097785] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.098723] x86/mm: Checking user space page tables [ 1.144505] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.145480] Run /init as init process [ 1.147870] with arguments: [ 1.147871] /init [ 1.147872] with environment: [ 1.147874] HOME=/ [ 1.147875] TERM=linux [ 1.147876] BOOT_IMAGE=/vmlinuz-5.8.0-29-generic [ 1.211093] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.231095] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.268684] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 1.270427] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3 [ 1.271781] ahci 0000:00:1f.2: version 3.0 [ 1.271789] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 1.273416] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.273455] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.274948] i2c i2c-0: 8/8 memory slots populated (from DMI) [ 1.275952] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.277445] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 1.279221] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.283139] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2f impl SATA mode [ 1.284495] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.331648] scsi host0: ahci [ 1.332857] xhci_hcd 0000:06:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 [ 1.333064] scsi host1: ahci [ 1.336015] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 1.337830] scsi host2: ahci [ 1.339324] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.339326] usb usb3: Product: xHCI Host Controller [ 1.339328] usb usb3: Manufacturer: Linux 5.8.0-29-generic xhci-hcd [ 1.339329] usb usb3: SerialNumber: 0000:06:00.0 [ 1.339653] hub 3-0:1.0: USB hub found [ 1.341901] scsi host3: ahci [ 1.343435] hub 3-0:1.0: 2 ports detected [ 1.345711] scsi host4: ahci [ 1.347062] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 1.348343] scsi host5: ahci [ 1.349137] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4 [ 1.350266] ata1: SATA max UDMA/133 abar m2048@0xfbf25000 port 0xfbf25100 irq 36 [ 1.351132] firewire_ohci 0000:09:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10 [ 1.351374] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed [ 1.352378] ata2: SATA max UDMA/133 abar m2048@0xfbf25000 port 0xfbf25180 irq 36 [ 1.353452] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.354471] ata3: SATA max UDMA/133 abar m2048@0xfbf25000 port 0xfbf25200 irq 36 [ 1.355545] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 1.356566] ata4: SATA max UDMA/133 abar m2048@0xfbf25000 port 0xfbf25280 irq 36 [ 1.357615] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.358662] ata5: DUMMY [ 1.359721] usb usb4: Product: xHCI Host Controller [ 1.360767] ata6: SATA max UDMA/133 abar m2048@0xfbf25000 port 0xfbf25380 irq 36 [ 1.361804] usb usb4: Manufacturer: Linux 5.8.0-29-generic xhci-hcd [ 1.363054] ahci 0000:08:00.0: SSS flag set, parallel bus scan disabled [ 1.363890] usb usb4: SerialNumber: 0000:06:00.0 [ 1.364965] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.366166] hub 4-0:1.0: USB hub found [ 1.367024] ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc [ 1.367407] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.367409] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.367684] hub 1-1:1.0: USB hub found [ 1.367779] hub 1-1:1.0: 6 ports detected [ 1.368457] hub 4-0:1.0: 2 ports detected [ 1.370064] scsi host6: ahci [ 1.371191] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 1.372214] scsi host7: ahci [ 1.373588] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5 [ 1.375131] ata7: SATA max UDMA/133 abar m512@0xfbb00000 port 0xfbb00100 irq 46 [ 1.387453] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.387952] ata8: SATA max UDMA/133 abar m512@0xfbb00000 port 0xfbb00180 irq 46 [ 1.389104] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.393114] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.393535] hub 2-1:1.0: USB hub found [ 1.396739] hub 2-1:1.0: 8 ports detected [ 1.437853] xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 [ 1.439479] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 1.442365] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.445294] usb usb5: Product: xHCI Host Controller [ 1.448185] usb usb5: Manufacturer: Linux 5.8.0-29-generic xhci-hcd [ 1.451135] usb usb5: SerialNumber: 0000:07:00.0 [ 1.454344] hub 5-0:1.0: USB hub found [ 1.457413] hub 5-0:1.0: 2 ports detected [ 1.460511] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 1.461793] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6 [ 1.463092] xhci_hcd 0000:07:00.0: Host supports USB 3.0 SuperSpeed [ 1.464320] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.465527] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 1.466714] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.467897] usb usb6: Product: xHCI Host Controller [ 1.469147] usb usb6: Manufacturer: Linux 5.8.0-29-generic xhci-hcd [ 1.470411] usb usb6: SerialNumber: 0000:07:00.0 [ 1.471795] hub 6-0:1.0: USB hub found [ 1.472932] hub 6-0:1.0: 2 ports detected [ 1.494768] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 30:85:a9:9b:46:66 [ 1.495891] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.497023] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 1.501562] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 1.677704] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.680503] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.683113] usb 3-1: new full-speed USB device number 2 using xhci_hcd [ 1.683347] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.686229] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.687433] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.688569] ata6.00: ATAPI: HL-DT-ST BD-RE BH14NS40, 1.00, max UDMA/100 [ 1.689708] ata3.00: ATA-8: ST3250310AS, 3.ADA, max UDMA/133 [ 1.690807] ata3.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 32) [ 1.691087] usb 2-1.4: new high-speed USB device number 3 using ehci-pci [ 1.691914] ata2.00: ATA-11: WDC WDS200T2B0A, X61190WD, max UDMA/133 [ 1.694553] ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.695666] ata1.00: ATA-9: M4-CT512M4SSD2, 070H, max UDMA/100 [ 1.696737] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.697898] ata3.00: configured for UDMA/133 [ 1.698958] ata4.00: ATA-8: FUJITSU MHW2120BJ FFS G2, 0085001C, max UDMA/100 [ 1.700030] ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.701100] ata6.00: configured for UDMA/100 [ 1.702289] ata1.00: configured for UDMA/100 [ 1.703358] ata2.00: configured for UDMA/133 [ 1.703474] scsi 0:0:0:0: Direct-Access ATA M4-CT512M4SSD2 070H PQ: 0 ANSI: 5 [ 1.704767] ata4.00: configured for UDMA/100 [ 1.705622] ata7: SATA link down (SStatus 0 SControl 300) [ 1.705807] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.705913] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 1.705926] sd 0:0:0:0: [sda] Write Protect is off [ 1.705928] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.705946] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.705988] scsi 1:0:0:0: Direct-Access ATA WDC WDS200T2B0A 90WD PQ: 0 ANSI: 5 [ 1.706111] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.706182] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.706190] sd 1:0:0:0: [sdb] Write Protect is off [ 1.706191] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.706202] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.706249] scsi 2:0:0:0: Direct-Access ATA ST3250310AS A PQ: 0 ANSI: 5 [ 1.706403] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.706454] sd 2:0:0:0: [sdc] 488281250 512-byte logical blocks: (250 GB/233 GiB) [ 1.706461] sd 2:0:0:0: [sdc] Write Protect is off [ 1.706463] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.706474] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.706823] scsi 3:0:0:0: Direct-Access ATA FUJITSU MHW2120B 001C PQ: 0 ANSI: 5 [ 1.723331] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.723356] sd 3:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.726844] sd 3:0:0:0: [sdd] Write Protect is off [ 1.727358] scsi 5:0:0:0: CD-ROM HL-DT-ST BD-RE BH14NS40 1.00 PQ: 0 ANSI: 5 [ 1.728808] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.730671] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.733333] sda: sda1 sda2 sda3 sda4 sda5 [ 1.735803] sdb: sdb1 sdb2 [ 1.736626] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.737880] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.775585] sdc: sdc1 sdc9 [ 1.777203] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.803124] tsc: Refined TSC clocksource calibration: 3201.988 MHz [ 1.803797] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 1.805661] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e27a01d50d, max_idle_ns: 440795329862 ns [ 1.808313] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.812590] usb 2-1.4: Product: USB 2.0 Hub [ 1.814109] clocksource: Switched to clocksource tsc [ 1.814513] hub 2-1.4:1.0: USB hub found [ 1.816545] hub 2-1.4:1.0: 4 ports detected [ 1.830100] sr 5:0:0:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.831197] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.851719] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 1.851887] sr 5:0:0:0: Attached scsi generic sg4 type 5 [ 1.866849] sdd: sdd1 [ 1.868877] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.871306] firewire_core 0000:09:00.0: created device fw0: GUID 001e8c00005eb989, S400 [ 1.895129] usb 2-1.5: new low-speed USB device number 4 using ehci-pci [ 1.908963] usb 3-1: New USB device found, idVendor=045e, idProduct=07a5, bcdDevice= 7.67 [ 1.910596] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.912220] usb 3-1: Product: Microsoft® 2.4GHz Transceiver v9.0 [ 1.913818] usb 3-1: Manufacturer: Microsoft [ 1.926584] hid: raw HID events driver (C) Jiri Kosina [ 1.941051] usbcore: registered new interface driver usbhid [ 1.942328] usbhid: USB HID core driver [ 1.947109] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb3/3-1/3-1:1.0/0003:045E:07A5.0001/input/input2 [ 2.007339] hid-generic 0003:045E:07A5.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:06:00.0-1/input0 [ 2.011928] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb3/3-1/3-1:1.1/0003:045E:07A5.0002/input/input3 [ 2.014869] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb3/3-1/3-1:1.1/0003:045E:07A5.0002/input/input4 [ 2.017740] hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:06:00.0-1/input1 [ 2.019316] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb3/3-1/3-1:1.2/0003:045E:07A5.0003/input/input5 [ 2.079220] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb3/3-1/3-1:1.2/0003:045E:07A5.0003/input/input6 [ 2.080581] hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:06:00.0-1/input2 [ 2.103736] usb 2-1.5: New USB device found, idVendor=051d, idProduct=0002, bcdDevice= 1.01 [ 2.106989] usb 2-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.110309] usb 2-1.5: Product: Back-UPS RS 1300 LCD FW:838.H5 .D USB FW:H5 [ 2.113601] usb 2-1.5: Manufacturer: American Power Conversion [ 2.116857] usb 2-1.5: SerialNumber: JB0702007088 [ 2.169858] ata8: SATA link down (SStatus 0 SControl 300) [ 2.189519] random: fast init done [ 2.205122] random: lvm: uninitialized urandom read (4 bytes read) [ 2.221206] random: lvm: uninitialized urandom read (2 bytes read) [ 2.243124] usb 2-1.4.4: new full-speed USB device number 5 using ehci-pci [ 2.539389] usb 2-1.4.4: New USB device found, idVendor=046d, idProduct=0a29, bcdDevice=76.57 [ 2.540709] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.541978] usb 2-1.4.4: Product: Logitech Wireless Headset [ 2.543247] usb 2-1.4.4: Manufacturer: Logitech [ 2.544501] usb 2-1.4.4: SerialNumber: 000D44B25A6A [ 2.555571] input: Logitech Logitech Wireless Headset Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.4/2-1.4.4:1.3/0003:046D:0A29.0004/input/input7 [ 2.615353] input: Logitech Logitech Wireless Headset as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.4/2-1.4.4:1.3/0003:046D:0A29.0004/input/input8 [ 2.618218] hid-generic 0003:046D:0A29.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Wireless Headset] on usb-0000:00:1d.0-1.4.4/input3 [ 2.719040] hid-generic 0003:051D:0002.0005: hiddev1,hidraw4: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1300 LCD FW:838.H5 .D USB FW:H5 ] on usb-0000:00:1d.0-1.5/input0 [ 2.769941] random: lvm: uninitialized urandom read (4 bytes read) [ 2.799142] usb 2-1.6: new full-speed USB device number 6 using ehci-pci [ 2.909671] usb 2-1.6: New USB device found, idVendor=0922, idProduct=001a, bcdDevice= 1.12 [ 2.913145] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.916621] usb 2-1.6: Product: DYMO LabelWriter 400 Turbo [ 2.920077] usb 2-1.6: Manufacturer: DYMO [ 2.923522] usb 2-1.6: SerialNumber: 07022707173059 [ 2.981563] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 3.159093] systemd[1]: Inserted module 'autofs4' [ 3.191522] systemd[1]: systemd 246.6-1ubuntu1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 3.215294] systemd[1]: Detected architecture x86-64. [ 3.250559] systemd[1]: Set hostname to . [ 3.319691] random: lvmconfig: uninitialized urandom read (4 bytes read) [ 3.379316] systemd[1]: /lib/systemd/system/dbus.service:12: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 3.421629] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 3.459814] systemd[1]: Queued start job for default target Graphical Interface. [ 3.462627] systemd[1]: Created slice system-modprobe.slice. [ 3.466369] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.469877] systemd[1]: Created slice User and Session Slice. [ 3.473253] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.476705] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.480021] systemd[1]: Reached target Remote File Systems. [ 3.483200] systemd[1]: Reached target Slices. [ 3.486357] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3.489476] systemd[1]: Listening on LVM2 poll daemon socket. [ 3.492631] systemd[1]: Listening on Syslog Socket. [ 3.495756] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.498865] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.502143] systemd[1]: Listening on Journal Audit Socket. [ 3.505324] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.508522] systemd[1]: Listening on Journal Socket. [ 3.511737] systemd[1]: Listening on udev Control Socket. [ 3.514814] systemd[1]: Listening on udev Kernel Socket. [ 3.518539] systemd[1]: Mounting Huge Pages File System... [ 3.522153] systemd[1]: Mounting POSIX Message Queue File System... [ 3.525743] systemd[1]: Mounting Kernel Debug File System... [ 3.529221] systemd[1]: Mounting Kernel Trace File System... [ 3.533504] systemd[1]: Starting Journal Service... [ 3.537096] systemd[1]: Starting Availability of block devices... [ 3.540695] systemd[1]: Starting Set the console keyboard layout... [ 3.544241] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.548139] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3.551587] random: lvm: uninitialized urandom read (4 bytes read) [ 3.551900] systemd[1]: Starting Load Kernel Module drm... [ 3.557480] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 3.558810] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 3.562413] systemd[1]: Starting Load Kernel Modules... [ 3.565994] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.569473] systemd[1]: Starting Coldplug All udev Devices... [ 3.572359] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 3.572958] systemd[1]: Starting Uncomplicated firewall... [ 3.578194] systemd[1]: Mounted Huge Pages File System. [ 3.580709] systemd[1]: Mounted POSIX Message Queue File System. [ 3.583228] systemd[1]: Mounted Kernel Debug File System. [ 3.585111] lp: driver loaded but no devices found [ 3.586810] systemd[1]: Mounted Kernel Trace File System. [ 3.588134] ppdev: user-space parallel port driver [ 3.590756] systemd[1]: Finished Availability of block devices. [ 3.593579] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.596133] systemd[1]: modprobe@drm.service: Succeeded. [ 3.597528] systemd[1]: Finished Load Kernel Module drm. [ 3.600253] systemd[1]: Finished Load Kernel Modules. [ 3.602978] systemd[1]: Finished Remount Root and Kernel File Systems. [ 3.606248] systemd[1]: Finished Set the console keyboard layout. [ 3.609035] systemd[1]: Finished Uncomplicated firewall. [ 3.612295] systemd[1]: Mounting FUSE Control File System... [ 3.615388] systemd[1]: Mounting Kernel Configuration File System... [ 3.618133] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 3.619406] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 3.621200] systemd[1]: Starting Load/Save Random Seed... [ 3.624246] systemd[1]: Starting Apply Kernel Variables... [ 3.627511] systemd[1]: Starting Create System Users... [ 3.630637] systemd[1]: Mounted FUSE Control File System. [ 3.633704] systemd[1]: Mounted Kernel Configuration File System. [ 3.635352] systemd[1]: Finished Load/Save Random Seed. [ 3.637404] systemd[1]: Finished Apply Kernel Variables. [ 3.643102] systemd[1]: Finished Create System Users. [ 3.645173] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.646808] systemd[1]: Started Journal Service. [ 3.952619] usblp 2-1.6:1.0: usblp2: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x0922 pid 0x001A [ 3.952646] usbcore: registered new interface driver usblp [ 3.959267] mc: Linux media interface: v0.10 [ 3.959418] pstore: Using crash dump compression: deflate [ 3.959431] pstore: Registered efi as persistent store backend [ 3.981366] asus_wmi: ASUS WMI generic driver loaded [ 3.982255] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer [ 3.982256] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 3.982257] RAPL PMU: hw unit of domain package 2^-16 Joules [ 3.984975] asus_wmi: Initialization: 0x0 [ 3.985034] asus_wmi: BIOS WMI version: 0.9 [ 3.985142] asus_wmi: SFUN value: 0x0 [ 3.985144] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 3.986238] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9 [ 3.988789] cryptd: max_cpu_qlen set to 1000 [ 4.026737] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 4.027084] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 4.027159] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 4.029582] AVX version of gcm_enc/dec engaged. [ 4.029584] AES CTR mode by8 optimization enabled [ 4.036514] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 4.036590] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 4.036667] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 4.036740] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 4.036809] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 4.036882] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 4.058843] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 4.058846] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.058849] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.058850] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.058852] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 4.058853] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.058855] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 4.058857] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 4.058859] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 4.108799] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 4.108866] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 4.108951] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 4.109016] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 4.109073] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 4.109141] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 4.109202] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [ 4.109248] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [ 4.121302] usbcore: registered new interface driver snd-usb-audio [ 4.121531] [drm] radeon kernel modesetting enabled. [ 4.121610] checking generic (d0000000 7e9000) vs hw (d0000000 10000000) [ 4.121611] fb0: switching to radeondrmfb from EFI VGA [ 4.123503] Console: switching to colour dummy device 80x25 [ 4.123542] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 4.123884] [drm] initializing kernel modesetting (TAHITI 0x1002:0x679A 0x1787:0x201C 0x00). [ 4.123961] ATOM BIOS: TAHITI [ 4.123999] [drm] Changing default dispclk from 500Mhz to 600Mhz [ 4.124010] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used) [ 4.124012] radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF [ 4.124016] [drm] Detected VRAM RAM=3072M, BAR=256M [ 4.124017] [drm] RAM width 384bits DDR [ 4.125321] [TTM] Zone kernel: Available graphics memory: 32901888 KiB [ 4.125322] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 4.125323] [TTM] Initializing pool allocator [ 4.125329] [TTM] Initializing DMA pool allocator [ 4.125354] [drm] radeon: 3072M of VRAM memory ready [ 4.125355] [drm] radeon: 2048M of GTT memory ready. [ 4.125372] [drm] Loading tahiti Microcode [ 4.133823] [drm] Possible lm96163 thermal controller at 0x4c with fan control [ 4.140605] [drm] radeon: dpm initialized [ 4.144381] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.144399] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.144405] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.144411] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.144414] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.144420] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.144423] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.144429] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.144431] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.144437] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.144439] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.144446] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.144448] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.144455] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.144457] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.144464] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.144466] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.144472] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.144475] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.144480] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.144483] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.144489] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.144516] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 4.144525] EDAC sbridge: Couldn't find mci handler [ 4.144529] EDAC sbridge: Failed to register device with error -19. [ 4.144826] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 4.145889] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 4.148128] [drm] PCIE gen 3 link speeds already enabled [ 4.201862] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000). [ 4.201994] radeon 0000:01:00.0: WB enabled [ 4.201998] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0x(____ptrval____) [ 4.201999] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0x(____ptrval____) [ 4.202000] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0x(____ptrval____) [ 4.202002] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0x(____ptrval____) [ 4.202003] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0x(____ptrval____) [ 4.202197] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x(____ptrval____) [ 4.222156] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0x(____ptrval____) [ 4.222158] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0x(____ptrval____) [ 4.222188] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.222191] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 4.222252] radeon 0000:01:00.0: radeon: using MSI. [ 4.222277] [drm] radeon: irq initialized. [ 4.319429] random: crng init done [ 4.364632] [drm] ring test on 0 succeeded in 1 usecs [ 4.364638] [drm] ring test on 1 succeeded in 1 usecs [ 4.364643] [drm] ring test on 2 succeeded in 1 usecs [ 4.364651] [drm] ring test on 3 succeeded in 2 usecs [ 4.364657] [drm] ring test on 4 succeeded in 2 usecs [ 4.375410] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.375420] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.375424] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.375428] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.375429] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.375433] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.375435] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.375439] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.375440] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.375444] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.375445] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.375449] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.375451] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.375455] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.375456] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.375461] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.375462] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.375465] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.375467] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.375470] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.375472] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.375476] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.375496] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 4.375504] EDAC sbridge: Couldn't find mci handler [ 4.375506] EDAC sbridge: Failed to register device with error -19. [ 4.380345] intel_rapl_common: Found RAPL domain package [ 4.380347] intel_rapl_common: Found RAPL domain core [ 4.540476] [drm] ring test on 5 succeeded in 1 usecs [ 4.540482] [drm] UVD initialized successfully. [ 4.649727] [drm] ring test on 6 succeeded in 19 usecs [ 4.649741] [drm] ring test on 7 succeeded in 4 usecs [ 4.649742] [drm] VCE initialized successfully. [ 4.650094] [drm] ib test on ring 0 succeeded in 0 usecs [ 4.650139] [drm] ib test on ring 1 succeeded in 0 usecs [ 4.650162] [drm] ib test on ring 2 succeeded in 0 usecs [ 4.650184] [drm] ib test on ring 3 succeeded in 0 usecs [ 4.650203] [drm] ib test on ring 4 succeeded in 0 usecs [ 4.847731] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.847739] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.847742] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.847746] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.847747] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.847751] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.847753] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.847757] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.847758] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.847762] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.847764] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.847767] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.847769] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.847773] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.847774] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.847779] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.847780] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.847783] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.847785] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.847788] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.847790] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.847794] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.847812] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 4.847819] EDAC sbridge: Couldn't find mci handler [ 4.847821] EDAC sbridge: Failed to register device with error -19. [ 4.891829] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.891843] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.891849] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.891859] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.891863] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.891886] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.891890] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.891899] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.891903] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.891912] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.891915] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.891925] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.891928] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.891938] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.891941] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.891952] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.891954] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.891962] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.891967] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.891975] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.891980] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.891988] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.892026] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 4.892040] EDAC sbridge: Couldn't find mci handler [ 4.892045] EDAC sbridge: Failed to register device with error -19. [ 4.939695] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.939708] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.939713] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.939735] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.939740] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.939750] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.939754] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.939764] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.939768] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.939778] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.939795] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.939804] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.939808] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.939818] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.939821] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.939832] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.939834] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.939842] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.939847] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.939855] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.939860] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.939868] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.939906] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 4.939921] EDAC sbridge: Couldn't find mci handler [ 4.939926] EDAC sbridge: Failed to register device with error -19. [ 4.975579] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.975585] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 4.975587] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.975590] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 4.975592] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.975596] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 4.975597] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.975601] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 4.975603] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.975606] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 4.975608] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.975611] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 4.975613] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.975617] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 4.975618] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.975623] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 4.975623] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.975626] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 4.975629] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.975632] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 4.975634] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.975637] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 4.975652] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 4.975657] EDAC sbridge: Couldn't find mci handler [ 4.975659] EDAC sbridge: Failed to register device with error -19. [ 5.047499] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.047510] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.047514] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.047518] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.047520] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.047523] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.047525] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.047529] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.047530] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.047534] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.047536] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.047540] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.047541] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.047545] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.047546] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.047551] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.047552] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.047555] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.047557] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.047560] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.047562] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.047566] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.047586] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 5.047594] EDAC sbridge: Couldn't find mci handler [ 5.047596] EDAC sbridge: Failed to register device with error -19. [ 5.107557] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.107572] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.107577] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.107582] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.107585] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.107590] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.107592] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.107597] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.107599] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.107604] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.107606] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.107611] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.107613] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.107618] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.107620] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.107625] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.107627] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.107631] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.107634] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.107638] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.107641] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.107645] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.107671] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 5.107682] EDAC sbridge: Couldn't find mci handler [ 5.107686] EDAC sbridge: Failed to register device with error -19. [ 5.167680] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.167690] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.167694] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.167698] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.167700] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.167703] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.167705] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.167709] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.167710] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.167714] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.167716] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.167720] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.167721] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.167725] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.167727] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.167732] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.167732] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.167736] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.167738] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.167741] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.167744] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.167747] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.167766] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 5.167774] EDAC sbridge: Couldn't find mci handler [ 5.167776] EDAC sbridge: Failed to register device with error -19. [ 5.168084] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 5.219111] audit: type=1400 audit(1605588116.808:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=970 comm="apparmor_parser" [ 5.219116] audit: type=1400 audit(1605588116.808:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=971 comm="apparmor_parser" [ 5.219119] audit: type=1400 audit(1605588116.808:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=974 comm="apparmor_parser" [ 5.219122] audit: type=1400 audit(1605588116.808:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=976 comm="apparmor_parser" [ 5.219125] audit: type=1400 audit(1605588116.808:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=976 comm="apparmor_parser" [ 5.219128] audit: type=1400 audit(1605588116.808:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=973 comm="apparmor_parser" [ 5.219131] audit: type=1400 audit(1605588116.808:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=973 comm="apparmor_parser" [ 5.219133] audit: type=1400 audit(1605588116.808:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=973 comm="apparmor_parser" [ 5.221460] audit: type=1400 audit(1605588116.812:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=982 comm="apparmor_parser" [ 5.247495] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.247507] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.247511] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.247515] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.247516] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.247520] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.247522] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.247526] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.247527] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.247531] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.247533] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.247536] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.247538] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.247542] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.247543] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.247548] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.247549] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.247552] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.247554] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.247557] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.247560] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.247563] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.247582] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 5.247592] EDAC sbridge: Couldn't find mci handler [ 5.247594] EDAC sbridge: Failed to register device with error -19. [ 5.315096] Adding 69631996k swap on /dev/sdd1. Priority:-2 extents:1 across:69631996k FS [ 5.323111] [drm] ib test on ring 5 succeeded [ 5.349180] kauditd_printk_skb: 19 callbacks suppressed [ 5.349182] audit: type=1400 audit(1605588116.940:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=999 comm="apparmor_parser" [ 5.349217] audit: type=1400 audit(1605588116.940:31): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.snap-store" pid=998 comm="apparmor_parser" [ 5.349356] audit: type=1400 audit(1605588116.940:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=1000 comm="apparmor_parser" [ 5.355184] audit: type=1400 audit(1605588116.948:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/9721/usr/lib/snapd/snap-confine" pid=996 comm="apparmor_parser" [ 5.355188] audit: type=1400 audit(1605588116.948:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/9721/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=996 comm="apparmor_parser" [ 5.363399] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.363410] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.363414] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.363418] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.363420] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.363423] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.363425] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.363429] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.363430] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.363434] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.363435] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.363439] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.363441] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.363445] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.363446] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.363451] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.363452] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.363455] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.363457] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.363460] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.363462] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.363466] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.363485] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 5.363493] EDAC sbridge: Couldn't find mci handler [ 5.363495] EDAC sbridge: Failed to register device with error -19. [ 5.439513] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.439525] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.439529] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.439533] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.439534] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.439538] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.439540] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.439543] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 5.439545] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.439549] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 5.439550] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.439554] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 5.439556] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.439560] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 5.439561] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.439566] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 5.439566] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.439570] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 5.439572] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.439575] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 5.439577] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.439581] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 5.439600] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 5.439609] EDAC sbridge: Couldn't find mci handler [ 5.439611] EDAC sbridge: Failed to register device with error -19. [ 5.752365] audit: type=1400 audit(1605588117.344:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.snap-store" pid=997 comm="apparmor_parser" [ 5.839113] [drm] ib test on ring 6 succeeded [ 5.892270] audit: type=1400 audit(1605588117.484:36): apparmor="ALLOWED" operation="open" profile="/usr/sbin/sssd" name="/etc/sssd/conf.d/" pid=1046 comm="sssd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 5.892886] audit: type=1400 audit(1605588117.484:37): apparmor="ALLOWED" operation="open" profile="/usr/sbin/sssd" name="/usr/share/sssd/cfg_rules.ini" pid=1046 comm="sssd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 5.909760] audit: type=1400 audit(1605588117.500:38): apparmor="ALLOWED" operation="capable" profile="/usr/sbin/sssd" pid=1046 comm="sssd" capability=12 capname="net_admin" [ 6.033831] audit: type=1400 audit(1605588117.624:39): apparmor="ALLOWED" operation="open" profile="/usr/sbin/sssd" name="/etc/sssd/conf.d/" pid=1137 comm="sssd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 6.347132] [drm] ib test on ring 7 succeeded [ 6.347955] [drm] Radeon Display Connectors [ 6.347956] [drm] Connector 0: [ 6.347957] [drm] DP-1 [ 6.347957] [drm] HPD5 [ 6.347958] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 6.347959] [drm] Encoders: [ 6.347959] [drm] DFP1: INTERNAL_UNIPHY2 [ 6.347960] [drm] Connector 1: [ 6.347960] [drm] DP-2 [ 6.347960] [drm] HPD4 [ 6.347961] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 6.347961] [drm] Encoders: [ 6.347962] [drm] DFP2: INTERNAL_UNIPHY2 [ 6.347962] [drm] Connector 2: [ 6.347963] [drm] HDMI-A-1 [ 6.347963] [drm] HPD1 [ 6.347964] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 6.347964] [drm] Encoders: [ 6.347964] [drm] DFP3: INTERNAL_UNIPHY1 [ 6.347965] [drm] Connector 3: [ 6.347965] [drm] DVI-I-1 [ 6.347965] [drm] HPD3 [ 6.347966] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 6.347967] [drm] Encoders: [ 6.347967] [drm] DFP4: INTERNAL_UNIPHY [ 6.347967] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 6.407444] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 6.407483] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 6.460440] [drm] fb mappable at 0xD05E1000 [ 6.460442] [drm] vram apper at 0xD0000000 [ 6.460443] [drm] size 33177600 [ 6.460444] [drm] fb depth is 24 [ 6.460444] [drm] pitch is 15360 [ 6.460563] fbcon: radeondrmfb (fb0) is primary device [ 6.604739] [drm:si_dpm_set_power_state [radeon]] *ERROR* si_restrict_performance_levels_before_switch failed [ 6.729899] Console: switching to colour frame buffer device 240x67 [ 6.752801] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 6.772024] [drm:radeon_dp_link_train_cr [radeon]] *ERROR* clock recovery reached max voltage [ 6.772055] [drm:radeon_dp_link_train_cr [radeon]] *ERROR* clock recovery failed [ 6.783153] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 6.788698] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 6.788699] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 6.890450] [drm] amdgpu kernel modesetting enabled. [ 6.890529] CRAT table not found [ 6.890532] Virtual CRAT table created for CPU [ 6.890543] amdgpu: Topology: Add CPU node [ 10.698745] rfkill: input handler disabled [ 10.901669] kauditd_printk_skb: 18 callbacks suppressed [ 10.901673] audit: type=1400 audit(1605588122.492:58): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/proc/1277/attr/apparmor/current" pid=1277 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 10.922084] usblp2: removed [ 10.923238] usblp 2-1.6:1.0: usblp2: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x0922 pid 0x001A [ 11.132875] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 11.132915] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 31.742870] usb 3-1: USB disconnect, device number 2