[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-17-server (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #58-Ubuntu SMP Tue Dec 1 19:58:28 UTC 2009 (Ubuntu 2.6.28-17.58-server) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x1000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] modified: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 20000000 @ 10000-15000 [ 0.000000] RAMDISK: 1f902000 - 1ffefd34 [ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080926] [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 512MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 20000000 [ 0.000000] low ram: 00000000 - 20000000 [ 0.000000] bootmap 00012000 - 00016000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0020000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a29ac] TEXT DATA BSS ==> [0000100000 - 00008a29ac] [ 0.000000] #4 [001f902000 - 001ffefd34] RAMDISK ==> [001f902000 - 001ffefd34] [ 0.000000] #5 [00008a3000 - 00008ac000] INIT_PG_TABLE ==> [00008a3000 - 00008ac000] [ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000] [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00020000 [ 0.000000] HighMem 0x00020000 -> 0x00020000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] On node 0 totalpages: 130959 [ 0.000000] free_area_init_node: node 0, pgdat c06ded00, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125984 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: AMI [ 0.000000] MPTABLE: Product ID: CNB20HE [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #4 Version 17 at 0xFEC00000. [ 0.000000] I/O APIC #5 Version 17 at 0xFEC01000. [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935 [ 0.000000] Kernel command line: root=UUID=eaaae5fe-81ef-469f-994b-e504b1ca9c66 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 996.587 MHz processor. [ 0.010000] Console: colour VGA+ 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.010000] allocated 2621120 bytes of page_cgroup [ 0.010000] please try cgroup_disable=memory option if you don't want [ 0.010000] Scanning for low memory corruption every 60 seconds [ 0.010000] Memory: 501616k/524288k available (4170k kernel code, 22144k reserved, 2237k data, 548k init, 0k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xffc78000 - 0xfffff000 (3612 kB) [ 0.010000] pkmap : 0xff800000 - 0xffa00000 (2048 kB) [ 0.010000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 0.010000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.010000] .init : 0xc0749000 - 0xc07d2000 ( 548 kB) [ 0.010000] .data : 0xc0512811 - 0xc0741fc0 (2237 kB) [ 0.010000] .text : 0xc0100000 - 0xc0512811 (4170 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.010019] Calibrating delay loop (skipped), value calculated using timer frequency.. 1993.17 BogoMIPS (lpj=9965870) [ 0.010059] Security Framework initialized [ 0.010077] SELinux: Disabled at boot. [ 0.010124] AppArmor: AppArmor initialized [ 0.010144] Mount-cache hash table entries: 512 [ 0.010445] Initializing cgroup subsys ns [ 0.010454] Initializing cgroup subsys cpuacct [ 0.010461] Initializing cgroup subsys memory [ 0.010470] Initializing cgroup subsys freezer [ 0.010499] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.010506] CPU: L2 cache: 256K [ 0.010513] CPU serial number disabled. [ 0.010543] Checking 'hlt' instruction... OK. [ 0.056127] ExtINT not setup in hardware but reported by MP table [ 0.056867] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.060000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.060000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.060000] ..... (found apic 0 pin 0) ... [ 0.166973] ....... works. [ 0.166979] CPU0: Intel Pentium III (Coppermine) stepping 0a [ 0.281492] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 1993.25 BogoMIPS (lpj=9966271) [ 0.010000] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.010000] CPU: L2 cache: 256K [ 0.010000] CPU serial number disabled. [ 0.440439] CPU1: Intel Pentium III (Coppermine) stepping 0a [ 0.440464] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.450145] Brought up 2 CPUs [ 0.450154] Total of 2 processors activated (3986.42 BogoMIPS). [ 0.450277] CPU0 attaching sched-domain: [ 0.450285] domain 0: span 0-1 level CPU [ 0.450292] groups: 0 1 [ 0.450307] CPU1 attaching sched-domain: [ 0.450312] domain 0: span 0-1 level CPU [ 0.450317] groups: 1 0 [ 0.450614] net_namespace: 776 bytes [ 0.450645] Booting paravirtualized kernel on bare hardware [ 0.451188] Time: 0:35:33 Date: 12/10/09 [ 0.451188] regulator: core version 0.5 [ 0.451188] NET: Registered protocol family 16 [ 0.451188] EISA bus registered [ 0.451188] PCI: PCI BIOS revision 2.10 entry at 0xfdbc1, last bus=2 [ 0.451188] PCI: Using configuration type 1 for base access [ 0.453517] ACPI: Interpreter disabled. [ 0.453517] SCSI subsystem initialized [ 0.453517] libata version 3.00 loaded. [ 0.453517] usbcore: registered new interface driver usbfs [ 0.453517] usbcore: registered new interface driver hub [ 0.453517] usbcore: registered new device driver usb [ 0.453517] PCI: Probing PCI hardware [ 0.453517] PCI: Probing PCI hardware (bus 00) [ 0.453517] pci 0000:00:00.0: reg 14 32bit mmio: [0x000000-0x000fff] [ 0.453517] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.453517] * this clock source is slow. If you are sure your timer does not have [ 0.453517] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.453517] pci 0000:00:03.0: reg 10 io port: [0xdfe0-0xdfe7] [ 0.453517] pci 0000:00:03.0: reg 14 io port: [0xdfac-0xdfaf] [ 0.453517] pci 0000:00:03.0: reg 18 io port: [0xdfa0-0xdfa7] [ 0.453517] pci 0000:00:03.0: reg 1c io port: [0xdfa8-0xdfab] [ 0.453517] pci 0000:00:03.0: reg 20 io port: [0xdf90-0xdf9f] [ 0.453517] pci 0000:00:03.0: reg 30 32bit mmio: [0xfea80000-0xfeafffff] [ 0.453517] pci 0000:00:03.0: supports D1 D2 [ 0.453517] pci 0000:00:05.0: reg 20 io port: [0xdf20-0xdf3f] [ 0.453517] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.453517] pci 0000:00:05.0: PME# disabled [ 0.453517] pci 0000:00:05.1: reg 20 io port: [0xdf40-0xdf5f] [ 0.453517] pci 0000:00:05.1: PME# supported from D0 D3hot D3cold [ 0.453517] pci 0000:00:05.1: PME# disabled [ 0.453517] pci 0000:00:05.2: reg 10 32bit mmio: [0xfea7fc00-0xfea7fcff] [ 0.453517] pci 0000:00:05.2: PME# supported from D0 D3hot D3cold [ 0.453517] pci 0000:00:05.2: PME# disabled [ 0.453517] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe87f000-0xfe87ffff] [ 0.453517] pci 0000:00:07.0: reg 14 io port: [0xd800-0xd83f] [ 0.453517] pci 0000:00:07.0: reg 18 32bit mmio: [0xfe700000-0xfe7fffff] [ 0.453517] pci 0000:00:07.0: reg 30 32bit mmio: [0xfe600000-0xfe6fffff] [ 0.453517] pci 0000:00:07.0: supports D1 D2 [ 0.453517] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.453517] pci 0000:00:07.0: PME# disabled [ 0.453517] pci 0000:00:0f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.453517] pci 0000:00:0f.2: reg 10 32bit mmio: [0xfe87e000-0xfe87efff] [ 0.453517] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.453517] pci 0000:01:00.0: reg 14 io port: [0xc800-0xc8ff] [ 0.453517] pci 0000:01:00.0: reg 18 32bit mmio: [0xfe0ff000-0xfe0fffff] [ 0.453517] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe0c0000-0xfe0dffff] [ 0.453517] pci 0000:01:00.0: supports D1 D2 [ 0.453517] pci 0000:00:00.1: bridge io port: [0xc000-0xcfff] [ 0.453517] pci 0000:00:00.1: bridge 32bit mmio: [0xfc400000-0xfe4fffff] [ 0.453517] pci 0000:00:00.1: bridge 32bit mmio pref: [0xfc100000-0xfc1fffff] [ 0.453517] PCI: Discovered primary peer bus 02 [IRQ] [ 0.453517] pci 0000:00:0f.0: ServerWorks IRQ router [1166:0200] [ 0.453517] pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.453517] pci 0000:00:05.0: PCI->APIC IRQ transform: INT A -> IRQ 20 [ 0.453517] pci 0000:00:05.1: PCI->APIC IRQ transform: INT B -> IRQ 21 [ 0.453517] pci 0000:00:05.2: PCI->APIC IRQ transform: INT C -> IRQ 29 [ 0.453517] pci 0000:00:07.0: PCI->APIC IRQ transform: INT A -> IRQ 23 [ 0.453517] pci 0000:00:0f.2: PCI->APIC IRQ transform: INT A -> IRQ 10 [ 0.453517] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 0.470023] Bluetooth: Core ver 2.13 [ 0.470107] NET: Registered protocol family 31 [ 0.470107] Bluetooth: HCI device and connection manager initialized [ 0.470107] Bluetooth: HCI socket layer initialized [ 0.470107] NET: Registered protocol family 8 [ 0.470107] NET: Registered protocol family 20 [ 0.470107] NetLabel: Initializing [ 0.470107] NetLabel: domain hash size = 128 [ 0.470108] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.470146] NetLabel: unlabeled traffic allowed by default [ 0.470354] AppArmor: AppArmor Filesystem Enabled [ 0.470361] pnp: PnP ACPI: disabled [ 0.470370] PnPBIOS: Scanning system for PnP BIOS support... [ 0.470401] PnPBIOS: Found PnP BIOS installation structure at 0xc00f4bd0 [ 0.470408] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x38e4, dseg 0xf0000 [ 0.471688] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver [ 0.471728] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.471736] system 00:08: ioport range 0xcf8-0xcff could not be reserved [ 0.471744] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.471751] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.471759] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.471766] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.471773] system 00:08: ioport range 0xc49-0xc4a has been reserved [ 0.471780] system 00:08: ioport range 0xc52-0xc52 has been reserved [ 0.471788] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.471795] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.471802] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.471810] system 00:08: ioport range 0xf50-0xf58 has been reserved [ 0.471817] system 00:08: ioport range 0x374-0x375 has been reserved [ 0.471824] system 00:08: ioport range 0x377-0x377 has been reserved [ 0.471833] system 00:08: iomem range 0xcd000-0xdffff has been reserved [ 0.471849] system 00:09: ioport range 0x580-0x58f has been reserved [ 0.471857] system 00:09: ioport range 0x530-0x531 has been reserved [ 0.471864] system 00:09: ioport range 0x540-0x55f has been reserved [ 0.471872] system 00:09: ioport range 0x500-0x51f has been reserved [ 0.471879] system 00:09: ioport range 0xc98-0xc98 has been reserved [ 0.472367] pci 0000:00:00.1: PCI bridge, secondary bus 0000:01 [ 0.472374] pci 0000:00:00.1: IO window: 0xc000-0xcfff [ 0.472383] pci 0000:00:00.1: MEM window: 0xfc400000-0xfe4fffff [ 0.472391] pci 0000:00:00.1: PREFETCH window: 0x000000fc100000-0x000000fc1fffff [ 0.472411] bus: 00 index 0 io port: [0x00-0xffff] [ 0.472417] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.472423] bus: 01 index 0 io port: [0xc000-0xcfff] [ 0.472428] bus: 01 index 1 mmio: [0xfc400000-0xfe4fffff] [ 0.472434] bus: 01 index 2 mmio: [0xfc100000-0xfc1fffff] [ 0.472439] bus: 01 index 3 mmio: [0x0-0x0] [ 0.472445] bus: 02 index 0 io port: [0x00-0xffff] [ 0.472451] bus: 02 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.472477] NET: Registered protocol family 2 [ 0.510152] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.510876] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.512639] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.514812] TCP: Hash tables configured (established 65536 bind 65536) [ 0.514821] TCP reno registered [ 0.530274] NET: Registered protocol family 1 [ 0.530600] checking if image is initramfs... it is [ 1.889289] Freeing initrd memory: 7095k freed [ 1.889426] cpufreq: No nForce2 chipset. [ 1.889824] audit: initializing netlink socket (disabled) [ 1.889864] type=2000 audit(1260405333.880:1): initialized [ 1.907644] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.911567] VFS: Disk quotas dquot_6.5.1 [ 1.911761] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.913637] fuse init (API version 7.10) [ 1.913880] msgmni has been set to 993 [ 1.914442] alg: No test for stdrng (krng) [ 1.914504] io scheduler noop registered [ 1.914510] io scheduler anticipatory registered [ 1.914516] io scheduler deadline registered (default) [ 1.914579] io scheduler cfq registered [ 1.914730] pci 0000:00:07.0: Firmware left e100 interrupts enabled; disabling [ 1.914773] pci 0000:01:00.0: Boot video device [ 1.914975] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.914999] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.915242] isapnp: Scanning for PnP cards... [ 2.271244] isapnp: No Plug & Play device found [ 2.274090] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.274261] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.274424] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.275185] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.275446] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.277392] brd: module loaded [ 2.278216] loop: module loaded [ 2.278431] Fixed MDIO Bus: probed [ 2.278448] PPP generic driver version 2.4.2 [ 2.278616] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 2.278707] Driver 'sd' needs updating - please use bus_type methods [ 2.278732] Driver 'sr' needs updating - please use bus_type methods [ 2.279840] scsi0 : pata_cmd64x [ 2.280203] scsi1 : pata_cmd64x [ 2.280310] ata1: PATA max UDMA/100 cmd 0xdfe0 ctl 0xdfac bmdma 0xdf90 irq 16 [ 2.280318] ata2: PATA max UDMA/100 cmd 0xdfa0 ctl 0xdfa8 bmdma 0xdf98 irq 16 [ 2.280371] pata_cmd64x: active 10 recovery 10 setup 3. [ 2.280387] pata_cmd64x: active 10 recovery 10 setup 3. [ 2.451936] pata_cmd64x: active 10 recovery 10 setup 3. [ 2.451946] pata_cmd64x: active 10 recovery 10 setup 3. [ 2.622899] scsi2 : pata_serverworks [ 2.623068] scsi3 : pata_serverworks [ 2.623156] ata3: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.623163] ata4: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.800511] ata3.00: ATA-7: Maxtor 6E030L0, NAR61590, max UDMA/133 [ 2.800518] ata3.00: 60058656 sectors, multi 16: LBA [ 2.840479] ata3.00: configured for MWDMA2 [ 3.021544] ata4.00: ATA-6: WDC WD1200JB-00EVA0, 15.05R15, max UDMA/100 [ 3.021552] ata4.00: 234441648 sectors, multi 16: LBA48 [ 3.062129] ata4.00: configured for MWDMA2 [ 3.062415] scsi 2:0:0:0: Direct-Access ATA Maxtor 6E030L0 NAR6 PQ: 0 ANSI: 5 [ 3.062687] sd 2:0:0:0: [sda] 60058656 512-byte hardware sectors: (30.7 GB/28.6 GiB) [ 3.062734] sd 2:0:0:0: [sda] Write Protect is off [ 3.062740] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.062814] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.062991] sd 2:0:0:0: [sda] 60058656 512-byte hardware sectors: (30.7 GB/28.6 GiB) [ 3.063032] sd 2:0:0:0: [sda] Write Protect is off [ 3.063038] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.063108] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.063120] sda: sda1 sda2 < sda5 > [ 3.098448] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.098611] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.098837] scsi 3:0:0:0: Direct-Access ATA WDC WD1200JB-00E 15.0 PQ: 0 ANSI: 5 [ 3.099084] sd 3:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 3.099128] sd 3:0:0:0: [sdb] Write Protect is off [ 3.099135] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.099207] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.099365] sd 3:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 3.099405] sd 3:0:0:0: [sdb] Write Protect is off [ 3.099411] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.099481] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.099492] sdb: sdb1 [ 3.115009] sd 3:0:0:0: [sdb] Attached SCSI disk [ 3.115155] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 3.115702] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.115817] ehci_hcd 0000:00:05.2: EHCI Host Controller [ 3.115963] ehci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 1 [ 3.116042] ehci_hcd 0000:00:05.2: irq 29, io mem 0xfea7fc00 [ 3.130648] ehci_hcd 0000:00:05.2: USB 2.0 started, EHCI 0.95 [ 3.130849] usb usb1: configuration #1 chosen from 1 choice [ 3.130920] hub 1-0:1.0: USB hub found [ 3.130943] hub 1-0:1.0: 4 ports detected [ 3.131200] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.131279] ohci_hcd 0000:00:0f.2: OHCI Host Controller [ 3.131402] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 2 [ 3.131447] ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfe87e000 [ 3.192787] usb usb2: configuration #1 chosen from 1 choice [ 3.192859] hub 2-0:1.0: USB hub found [ 3.192881] hub 2-0:1.0: 4 ports detected [ 3.193100] uhci_hcd: USB Universal Host Controller Interface driver [ 3.193239] uhci_hcd 0000:00:05.0: UHCI Host Controller [ 3.193351] uhci_hcd 0000:00:05.0: new USB bus registered, assigned bus number 3 [ 3.193394] uhci_hcd 0000:00:05.0: irq 20, io base 0x0000df20 [ 3.193590] usb usb3: configuration #1 chosen from 1 choice [ 3.193666] hub 3-0:1.0: USB hub found [ 3.193687] hub 3-0:1.0: 2 ports detected [ 3.193893] uhci_hcd 0000:00:05.1: UHCI Host Controller [ 3.194022] uhci_hcd 0000:00:05.1: new USB bus registered, assigned bus number 4 [ 3.194062] uhci_hcd 0000:00:05.1: irq 21, io base 0x0000df40 [ 3.194258] usb usb4: configuration #1 chosen from 1 choice [ 3.194329] hub 4-0:1.0: USB hub found [ 3.194348] hub 4-0:1.0: 2 ports detected [ 3.194695] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 [ 3.197131] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.197148] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.200124] mice: PS/2 mouse device common for all mice [ 3.210279] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 3.210326] rtc0: alarms up to one day, 114 bytes nvram [ 3.210558] device-mapper: uevent: version 1.0.3 [ 3.210869] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.211113] device-mapper: multipath: version 1.0.5 loaded [ 3.211121] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.211403] EISA: Probing bus 0 at eisa.0 [ 3.211485] EISA: Detected 0 cards. [ 3.211644] cpuidle: using governor ladder [ 3.211650] cpuidle: using governor menu [ 3.213141] TCP cubic registered [ 3.213523] NET: Registered protocol family 10 [ 3.214701] lo: Disabled Privacy Extensions [ 3.215616] NET: Registered protocol family 17 [ 3.215672] Bluetooth: L2CAP ver 2.11 [ 3.215677] Bluetooth: L2CAP socket layer initialized [ 3.215686] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.215691] Bluetooth: SCO socket layer initialized [ 3.215844] Bluetooth: RFCOMM socket layer initialized [ 3.215872] Bluetooth: RFCOMM TTY layer initialized [ 3.215877] Bluetooth: RFCOMM ver 1.10 [ 3.216028] Using IPI No-Shortcut mode [ 3.216239] registered taskstats version 1 [ 3.216522] Magic number: 5:812:556 [ 3.216677] rtc_cmos 00:04: setting system clock to 2009-12-10 00:35:35 UTC (1260405335) [ 3.216685] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.216690] EDD information not available. [ 3.217880] Freeing unused kernel memory: 548k freed [ 3.218218] Write protecting the kernel text: 4172k [ 3.218430] Write protecting the kernel read-only data: 1544k [ 3.229374] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 3.570665] usb 2-4: new full speed USB device using ohci_hcd and address 2 [ 3.771249] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI [ 3.771259] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.794837] e100 0000:00:07.0: PME# disabled [ 3.796574] e100: eth0: e100_probe: addr 0xfe87f000, irq 23, MAC addr 00:e0:81:29:37:a0 [ 3.820378] usb 2-4: configuration #1 chosen from 1 choice [ 4.110337] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 4.352820] usb 3-1: configuration #1 chosen from 1 choice [ 4.396466] usbcore: registered new interface driver hiddev [ 5.576715] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1500 LCD FW:837.H7 .D USB FW:H7 ] on usb-0000:00:05.0-1/input0 [ 5.576805] usbcore: registered new interface driver usbhid [ 5.576816] usbhid: v2.6:USB HID core driver [ 5.668501] PM: Starting manual resume from disk [ 5.668515] PM: Resume from partition 8:5 [ 5.668519] PM: Checking hibernation image. [ 5.669013] PM: Resume from disk failed. [ 5.701473] kjournald starting. Commit interval 5 seconds [ 5.701503] EXT3-fs: mounted filesystem with ordered data mode. [ 14.139212] udev: starting version 141 [ 14.355078] Linux agpgart interface v0.103 [ 14.378603] agpgart-serverworks 0000:00:00.0: can't determine aperture size [ 14.378670] agpgart-serverworks 0000:00:00.0: agp_backend_initialize() failed [ 14.378688] agpgart-serverworks: probe of 0000:00:00.0 failed with error -22 [ 14.378715] agpgart-serverworks 0000:00:00.2: ServerWorks CNB20HE is unsupported due to lack of documentation [ 14.378792] agpgart-serverworks 0000:00:00.3: ServerWorks CNB20HE is unsupported due to lack of documentation [ 14.447794] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.451132] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.460433] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 14.485390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.496969] piix4_smbus 0000:00:0f.0: SMBus Host Controller at 0x580, revision 0 [ 14.804573] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 15.152086] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 15.622945] psmouse serio1: ID: 10 00 64<4>logips2pp: Detected unknown logitech mouse model 89 [ 15.728000] lp: driver loaded but no devices found [ 15.985619] Adding 1277128k swap on /dev/sda5. Priority:-1 extents:1 across:1277128k [ 16.161399] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 17.191872] EXT3 FS on sda1, internal journal [ 18.121761] kjournald starting. Commit interval 5 seconds [ 18.122678] EXT3 FS on sdb1, internal journal [ 18.122692] EXT3-fs: mounted filesystem with ordered data mode. [ 24.851302] eth0: no IPv6 routers present [ 29.671251] warning: `proftpd' uses 32-bit capabilities (legacy support in use)