2008-10-15 20:03:16 |
Edward Karavakis |
bug |
|
|
added bug |
2008-10-15 20:06:08 |
Edward Karavakis |
description |
Binary package hint: linux-firmware
Edimax EW-7318Ug stopped working suddenly after upgrading to the latest kernel
disconnecting the wifi usb stick:
[ 1000.127146] usb 1-2: USB disconnect, address 3
[ 1000.130952] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 1000.132484] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 1000.134280] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 1000.135522] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 1000.135531] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 1000.138305] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.139651] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.141285] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.142624] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
Connecting the wifi usb stick:
[ 1048.860044] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 1049.155226] usb 1-2: configuration #1 chosen from 1 choice
[ 1049.268747] phy2 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 1049.268758] phy2 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 1049.538714] phy3: Selected rate control algorithm 'pid'
[ 1049.542064] Registered led device: rt73usb-phy3:radio
[ 1049.542452] Registered led device: rt73usb-phy3:assoc
[ 1049.542627] Registered led device: rt73usb-phy3:quality
[ 1049.573147] udev: renamed network interface wlan0 to wlan1
Trying to connect to my wireless network:
[ 1053.604571] firmware: requesting rt73.bin
[ 1053.694864] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1060.300446] wlan1: authenticate with AP 00:11:f5:a2:1d:28
[ 1060.302455] wlan1: authenticated
[ 1060.302462] wlan1: associate with AP 00:11:f5:a2:1d:28
[ 1060.305072] wlan1: RX AssocResp from 00:11:f5:a2:1d:28 (capab=0x411 status=0 aid=2)
[ 1060.305078] wlan1: associated
[ 1060.306054] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 1070.956012] wlan1: no IPv6 routers present
[ 1106.531612] wlan1: disassociating by local choice (reason=3) |
Binary package hint: linux-firmware
Edimax EW-7318Ug stopped working suddenly after upgrading to the latest kernel
disconnecting the wifi usb stick:
[ 1000.127146] usb 1-2: USB disconnect, address 3
[ 1000.130952] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 1000.132484] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 1000.134280] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 1000.135522] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 1000.135531] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 1000.138305] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.139651] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.141285] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.142624] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
Connecting the wifi usb stick:
[ 1048.860044] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 1049.155226] usb 1-2: configuration #1 chosen from 1 choice
[ 1049.268747] phy2 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 1049.268758] phy2 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 1049.538714] phy3: Selected rate control algorithm 'pid'
[ 1049.542064] Registered led device: rt73usb-phy3:radio
[ 1049.542452] Registered led device: rt73usb-phy3:assoc
[ 1049.542627] Registered led device: rt73usb-phy3:quality
[ 1049.573147] udev: renamed network interface wlan0 to wlan1
Trying to connect to my wireless network:
[ 1053.604571] firmware: requesting rt73.bin
[ 1053.694864] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1060.300446] wlan1: authenticate with AP 00:11:f5:a2:1d:28
[ 1060.302455] wlan1: authenticated
[ 1060.302462] wlan1: associate with AP 00:11:f5:a2:1d:28
[ 1060.305072] wlan1: RX AssocResp from 00:11:f5:a2:1d:28 (capab=0x411 status=0 aid=2)
[ 1060.305078] wlan1: associated
[ 1060.306054] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 1070.956012] wlan1: no IPv6 routers present
[ 1106.531612] wlan1: disassociating by local choice (reason=3)
Not quite sure if it's linux-firmware or linux-image-generic fault. |
|
2008-10-15 20:07:30 |
Edward Karavakis |
description |
Binary package hint: linux-firmware
Edimax EW-7318Ug stopped working suddenly after upgrading to the latest kernel
disconnecting the wifi usb stick:
[ 1000.127146] usb 1-2: USB disconnect, address 3
[ 1000.130952] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 1000.132484] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 1000.134280] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 1000.135522] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 1000.135531] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 1000.138305] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.139651] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.141285] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.142624] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
Connecting the wifi usb stick:
[ 1048.860044] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 1049.155226] usb 1-2: configuration #1 chosen from 1 choice
[ 1049.268747] phy2 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 1049.268758] phy2 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 1049.538714] phy3: Selected rate control algorithm 'pid'
[ 1049.542064] Registered led device: rt73usb-phy3:radio
[ 1049.542452] Registered led device: rt73usb-phy3:assoc
[ 1049.542627] Registered led device: rt73usb-phy3:quality
[ 1049.573147] udev: renamed network interface wlan0 to wlan1
Trying to connect to my wireless network:
[ 1053.604571] firmware: requesting rt73.bin
[ 1053.694864] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1060.300446] wlan1: authenticate with AP 00:11:f5:a2:1d:28
[ 1060.302455] wlan1: authenticated
[ 1060.302462] wlan1: associate with AP 00:11:f5:a2:1d:28
[ 1060.305072] wlan1: RX AssocResp from 00:11:f5:a2:1d:28 (capab=0x411 status=0 aid=2)
[ 1060.305078] wlan1: associated
[ 1060.306054] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 1070.956012] wlan1: no IPv6 routers present
[ 1106.531612] wlan1: disassociating by local choice (reason=3)
Not quite sure if it's linux-firmware or linux-image-generic fault. |
Binary package hint: linux-firmware
Edimax EW-7318Ug stopped working suddenly after upgrading to the latest kernel today.
Disconnecting the wifi usb stick:
[ 1000.127146] usb 1-2: USB disconnect, address 3
[ 1000.130952] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 1000.132484] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 1000.134280] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 1000.135522] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 1000.135531] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 1000.138305] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.139651] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.141285] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1000.142624] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
Connecting the wifi usb stick:
[ 1048.860044] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 1049.155226] usb 1-2: configuration #1 chosen from 1 choice
[ 1049.268747] phy2 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 1049.268758] phy2 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 1049.538714] phy3: Selected rate control algorithm 'pid'
[ 1049.542064] Registered led device: rt73usb-phy3:radio
[ 1049.542452] Registered led device: rt73usb-phy3:assoc
[ 1049.542627] Registered led device: rt73usb-phy3:quality
[ 1049.573147] udev: renamed network interface wlan0 to wlan1
Trying to connect to my wireless network:
[ 1053.604571] firmware: requesting rt73.bin
[ 1053.694864] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1060.300446] wlan1: authenticate with AP 00:11:f5:a2:1d:28
[ 1060.302455] wlan1: authenticated
[ 1060.302462] wlan1: associate with AP 00:11:f5:a2:1d:28
[ 1060.305072] wlan1: RX AssocResp from 00:11:f5:a2:1d:28 (capab=0x411 status=0 aid=2)
[ 1060.305078] wlan1: associated
[ 1060.306054] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 1070.956012] wlan1: no IPv6 routers present
[ 1106.531612] wlan1: disassociating by local choice (reason=3)
Not quite sure if it's linux-firmware or linux-image-generic fault. |
|
2008-11-09 18:19:36 |
Edward Karavakis |
linux-firmware: status |
New |
Invalid |
|
2008-11-09 18:19:36 |
Edward Karavakis |
linux-firmware: statusexplanation |
|
Worked fine after a couple of hours and a couple of reboots. |
|