[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-23-generic (buildd@lcy01-30) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #28-Ubuntu SMP Sun Dec 27 17:47:31 UTC 2015 (Ubuntu 4.2.0-23.28-generic 4.2.6) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.2.0-23-generic root=/dev/mapper/it--vg-root ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] tseg: 00bff00000 [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfdeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdf2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfdf3000-0x00000000bfdfffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3/GA-78LMT-USB3, BIOS FA 04/23/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000023f000000 aka 9200M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC [ 0.000000] total RAM covered: 3070M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5ed0-0x000f5edf] mapped at [ffff8800000f5ed0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE [ 0.000000] BRK [0x01ff1000, 0x01ff1fff] PGTABLE [ 0.000000] BRK [0x01ff2000, 0x01ff2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff] [ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M [ 0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff] [ 0.000000] [mem 0x220000000-0x23edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff] [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfdeffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbfbfffff] page 2M [ 0.000000] [mem 0xbfc00000-0xbfdeffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x33cdc000-0x35e65fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F78E0 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000BFDF3000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000BFDF3080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000BFDF3100 00683B (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x00000000BFDF0000 000040 [ 0.000000] ACPI: MSDM 0x00000000BFDF9A00 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: HPET 0x00000000BFDF9A80 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000BFDF9AC0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 0x00000000BFDF9B00 000022 (v01 GBT GBT B0 5455312E BG?? 00000101) [ 0.000000] ACPI: APIC 0x00000000BFDF9940 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000BFDF9BA0 001158 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x23eff9000-0x23effdfff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236600000-ffff88023e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfdeffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff] [ 0.000000] On node 0 totalpages: 2092430 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12216 pages used for memmap [ 0.000000] DMA32 zone: 781808 pages, LIFO batch:31 [ 0.000000] Normal zone: 20416 pages used for memmap [ 0.000000] Normal zone: 1306624 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfdf0000-0xbfdf2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfdf3000-0xbfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xbff00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88023ec00000 s96728 r8192 d30248 u262144 [ 0.000000] pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2059713 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-23-generic root=/dev/mapper/it--vg-root ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB) [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 8054956K/8369720K available (8148K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 314764K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3515.358 MHz processor [ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 7030.71 BogoMIPS (lpj=14061432) [ 0.000026] pid_max: default: 32768 minimum: 301 [ 0.000031] ACPI: Core revision 20150619 [ 0.002685] ACPI: All ACPI Tables successfully acquired [ 0.002704] Security Framework initialized [ 0.002715] AppArmor: AppArmor initialized [ 0.002716] Yama: becoming mindful. [ 0.003229] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.005257] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006135] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006145] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006362] Initializing cgroup subsys blkio [ 0.006365] Initializing cgroup subsys memory [ 0.006372] Initializing cgroup subsys devices [ 0.006374] Initializing cgroup subsys freezer [ 0.006377] Initializing cgroup subsys net_cls [ 0.006379] Initializing cgroup subsys perf_event [ 0.006381] Initializing cgroup subsys net_prio [ 0.006383] Initializing cgroup subsys hugetlb [ 0.006402] CPU: Physical Processor ID: 0 [ 0.006403] CPU: Processor Core ID: 0 [ 0.006405] mce: CPU supports 7 MCE banks [ 0.006411] LVT offset 1 assigned for vector 0xf9 [ 0.006415] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.006416] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.006647] Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000) [ 0.052902] ftrace: allocating 30910 entries in 121 pages [ 0.720098] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.866542] smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (fam: 15, model: 02, stepping: 00) [ 0.866565] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.866568] ... version: 0 [ 0.866569] ... bit width: 48 [ 0.866570] ... generic registers: 6 [ 0.866571] ... value mask: 0000ffffffffffff [ 0.866572] ... max period: 00007fffffffffff [ 0.866572] ... fixed-purpose events: 0 [ 0.866573] ... event mask: 000000000000003f [ 0.867205] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.867275] x86: Booting SMP configuration: [ 0.867277] .... node #0, CPUs: #1 #2 #3 #4 #5 [ 0.883574] x86: Booted up 1 node, 6 CPUs [ 0.883578] smpboot: Total of 6 processors activated (42184.29 BogoMIPS) [ 0.891352] devtmpfs: initialized [ 0.894675] evm: security.selinux [ 0.894676] evm: security.SMACK64 [ 0.894677] evm: security.SMACK64EXEC [ 0.894678] evm: security.SMACK64TRANSMUTE [ 0.894679] evm: security.SMACK64MMAP [ 0.894680] evm: security.ima [ 0.894680] evm: security.capability [ 0.894737] PM: Registering ACPI NVS region [mem 0xbfdf0000-0xbfdf2fff] (12288 bytes) [ 0.894817] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.894900] pinctrl core: initialized pinctrl subsystem [ 0.895004] RTC time: 15:45:20, date: 01/09/16 [ 0.895105] NET: Registered protocol family 16 [ 0.902398] cpuidle: using governor ladder [ 0.906393] cpuidle: using governor menu [ 0.906476] ACPI: bus type PCI registered [ 0.906478] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.906550] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.906552] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.906564] PCI: Using configuration type 1 for base access [ 0.914809] ACPI: Added _OSI(Module Device) [ 0.914812] ACPI: Added _OSI(Processor Device) [ 0.914813] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.914814] ACPI: Added _OSI(Processor Aggregator Device) [ 0.921369] ACPI: Interpreter enabled [ 0.921375] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580) [ 0.921379] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580) [ 0.921389] ACPI: (supports S0 S3 S4 S5) [ 0.921391] ACPI: Using IOAPIC for interrupt routing [ 0.921443] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.925058] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.925063] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.925068] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.925260] PCI host bridge to bus 0000:00 [ 0.925263] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.925265] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.925267] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.925268] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.925271] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.925272] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.925280] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 [ 0.925296] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 0.925369] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.925401] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.925435] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.925472] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 [ 0.925502] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.925537] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.925574] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 [ 0.925603] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.925636] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.925685] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.925710] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.925719] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.925728] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.925737] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.925746] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.925755] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 0.925775] pci 0000:00:11.0: set SATA to AHCI mode [ 0.925848] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.925863] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 0.925945] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.925981] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.925995] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.926076] pci 0000:00:12.1: System wakeup disabled by ACPI [ 0.926114] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.926139] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff] [ 0.926202] pci 0000:00:12.2: supports D1 D2 [ 0.926204] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.926237] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.926278] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.926293] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.926376] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.926412] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.926427] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 0.926508] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.926546] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.926571] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.926634] pci 0000:00:13.2: supports D1 D2 [ 0.926635] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.926670] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.926713] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.926849] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.926872] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.926881] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.926889] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.926898] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.926907] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 0.926926] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.926927] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.926928] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.926930] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.927001] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.927027] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.927080] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.927114] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.927149] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.927270] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.927331] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.927366] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.927381] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff] [ 0.927461] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.927499] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.927565] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.927625] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.927685] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.927746] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.927804] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.927910] pci 0000:01:00.0: [10de:1380] type 00 class 0x030000 [ 0.927930] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff] [ 0.927941] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.927951] pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref] [ 0.927958] pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f] [ 0.927966] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.928036] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300 [ 0.928056] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff] [ 0.938354] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.938358] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.938360] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.938363] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.938405] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.938426] pci 0000:02:00.0: reg 0x10: [mem 0xfdaff000-0xfdafffff 64bit] [ 0.938469] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.950336] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.950340] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.950342] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.950345] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.950388] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.950416] pci 0000:03:00.0: reg 0x10: [io 0xce00-0xceff] [ 0.950436] pci 0000:03:00.0: reg 0x18: [mem 0xfddff000-0xfddfffff 64bit pref] [ 0.950448] pci 0000:03:00.0: reg 0x20: [mem 0xfddf8000-0xfddfbfff 64bit pref] [ 0.950490] pci 0000:03:00.0: supports D1 D2 [ 0.950491] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.962326] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.962329] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] [ 0.962332] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.962335] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.962409] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.962413] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.962416] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.962420] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.962422] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.962423] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.962425] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.962426] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.962428] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.962448] pci_bus 0000:00: on NUMA node 0 [ 0.962625] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.962663] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.962700] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.962736] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.962771] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.962806] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.962842] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.962877] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.963454] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.963456] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.963458] vgaarb: loaded [ 0.963459] vgaarb: bridge control possible 0000:01:00.0 [ 0.963707] SCSI subsystem initialized [ 0.963768] libata version 3.00 loaded. [ 0.963789] ACPI: bus type USB registered [ 0.963806] usbcore: registered new interface driver usbfs [ 0.963815] usbcore: registered new interface driver hub [ 0.963836] usbcore: registered new device driver usb [ 0.963979] PCI: Using ACPI for IRQ routing [ 0.972346] PCI: pci_cache_line_size set to 64 bytes [ 0.972397] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.972398] e820: reserve RAM buffer [mem 0xbfdf0000-0xbfffffff] [ 0.972400] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff] [ 0.972498] NetLabel: Initializing [ 0.972499] NetLabel: domain hash size = 128 [ 0.972500] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.972509] NetLabel: unlabeled traffic allowed by default [ 0.972570] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.972573] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.974625] clocksource: Switched to clocksource hpet [ 0.980688] AppArmor: AppArmor Filesystem Enabled [ 0.980734] pnp: PnP ACPI init [ 0.980808] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.980810] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.980812] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.980815] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.981007] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.981030] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.981032] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.981034] system 00:01: [io 0x040b] has been reserved [ 0.981036] system 00:01: [io 0x04d6] has been reserved [ 0.981038] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.981039] system 00:01: [io 0x0c14] has been reserved [ 0.981041] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.981042] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.981044] system 00:01: [io 0x0c6f] has been reserved [ 0.981045] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.981047] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.981048] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.981050] system 00:01: [io 0x4000-0x40fe] could not be reserved [ 0.981051] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.981053] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.981055] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.981056] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.981058] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.981060] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.981182] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.981299] pnp 00:03: [dma 2] [ 0.981323] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.981504] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.981692] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.981817] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.981819] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.981975] system 00:07: [mem 0x000cea00-0x000cffff] has been reserved [ 0.981977] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.981979] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.981981] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.981982] system 00:07: [mem 0xbfdf0000-0xbfdfffff] could not be reserved [ 0.981984] system 00:07: [mem 0xffff0000-0xffffffff] has been reserved [ 0.981986] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.981987] system 00:07: [mem 0x00100000-0xbfdeffff] could not be reserved [ 0.981989] system 00:07: [mem 0xbfe00000-0xbfefffff] has been reserved [ 0.981990] system 00:07: [mem 0xbff00000-0xbfffffff] could not be reserved [ 0.981992] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.981994] system 00:07: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.981995] system 00:07: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.981997] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.982011] pnp: PnP ACPI: found 8 devices [ 0.988534] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.988555] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref] [ 0.988558] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.988560] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.988563] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.988565] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.988568] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.988569] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.988572] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.988574] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.988577] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.988578] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] [ 0.988581] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.988583] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.988585] pci 0000:00:14.4: PCI bridge to [bus 04] [ 0.988588] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.988592] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.988595] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.988601] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.988603] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.988605] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.988606] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.988608] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.988609] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.988611] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.988612] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.988613] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.988615] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.988616] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.988618] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.988619] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.988620] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.988622] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.988623] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.988625] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 0.988626] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.988627] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.988629] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.988630] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.988632] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.988653] NET: Registered protocol family 2 [ 0.988814] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.988980] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.989190] TCP: Hash tables configured (established 65536 bind 65536) [ 0.989235] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.989272] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.989338] NET: Registered protocol family 1 [ 1.350388] pci 0000:01:00.0: Video device with shadowed ROM [ 1.350522] PCI: CLS 64 bytes, default 64 [ 1.350589] Trying to unpack rootfs image as initramfs... [ 1.809766] Freeing initrd memory: 34344K (ffff880033cdc000 - ffff880035e66000) [ 1.809999] PCI-DMA: Disabling AGP. [ 1.810068] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 1.810069] PCI-DMA: using GART IOMMU. [ 1.810072] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.813821] perf: AMD NB counters detected [ 1.813924] microcode: CPU0: patch_level=0x0600081c [ 1.813930] microcode: CPU1: patch_level=0x0600081c [ 1.813938] microcode: CPU2: patch_level=0x0600081c [ 1.813946] microcode: CPU3: patch_level=0x0600081c [ 1.813953] microcode: CPU4: patch_level=0x0600081c [ 1.813961] microcode: CPU5: patch_level=0x0600081c [ 1.814022] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.814025] LVT offset 0 assigned for vector 0x400 [ 1.814044] perf: AMD IBS detected (0x000000ff) [ 1.814125] Scanning for low memory corruption every 60 seconds [ 1.814477] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.814502] Initialise system trusted keyring [ 1.814518] audit: initializing netlink subsys (disabled) [ 1.814532] audit: type=2000 audit(1452354320.016:1): initialized [ 1.814823] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 1.814824] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.816424] zpool: loaded [ 1.816426] zbud: loaded [ 1.816583] VFS: Disk quotas dquot_6.6.0 [ 1.816615] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.817105] fuse init (API version 7.23) [ 1.817242] Key type big_key registered [ 1.817654] Key type asymmetric registered [ 1.817656] Asymmetric key parser 'x509' registered [ 1.817667] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.817717] io scheduler noop registered [ 1.817719] io scheduler deadline registered (default) [ 1.817747] io scheduler cfq registered [ 1.818155] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.818162] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.818258] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.818262] ACPI: Power Button [PWRB] [ 1.818302] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.818304] ACPI: Power Button [PWRF] [ 1.818344] ACPI: acpi_idle registered with cpuidle [ 1.818680] GHES: HEST is not enabled! [ 1.818770] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.839191] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.840948] Linux agpgart interface v0.103 [ 1.843387] brd: module loaded [ 1.844369] loop: module loaded [ 1.844580] libphy: Fixed MDIO Bus: probed [ 1.844582] tun: Universal TUN/TAP device driver, 1.6 [ 1.844583] tun: (C) 1999-2004 Max Krasnyansky [ 1.844627] PPP generic driver version 2.4.2 [ 1.844737] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.844742] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 1.844817] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090 [ 1.844886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.844887] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.844889] usb usb1: Product: xHCI Host Controller [ 1.844890] usb usb1: Manufacturer: Linux 4.2.0-23-generic xhci-hcd [ 1.844892] usb usb1: SerialNumber: 0000:02:00.0 [ 1.844995] hub 1-0:1.0: USB hub found [ 1.845000] hub 1-0:1.0: 1 port detected [ 1.845062] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.845066] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 1.845084] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.845099] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.845100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.845102] usb usb2: Product: xHCI Host Controller [ 1.845103] usb usb2: Manufacturer: Linux 4.2.0-23-generic xhci-hcd [ 1.845104] usb usb2: SerialNumber: 0000:02:00.0 [ 1.845196] hub 2-0:1.0: USB hub found [ 1.845202] hub 2-0:1.0: 4 ports detected [ 1.845305] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.845309] ehci-pci: EHCI PCI platform driver [ 1.845408] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.845412] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.845415] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.845424] ehci-pci 0000:00:12.2: debug port 1 [ 1.845460] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.857871] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.857941] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.857943] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.857944] usb usb3: Product: EHCI Host Controller [ 1.857945] usb usb3: Manufacturer: Linux 4.2.0-23-generic ehci_hcd [ 1.857947] usb usb3: SerialNumber: 0000:00:12.2 [ 1.858061] hub 3-0:1.0: USB hub found [ 1.858066] hub 3-0:1.0: 6 ports detected [ 1.858296] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.858301] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.858303] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.858312] ehci-pci 0000:00:13.2: debug port 1 [ 1.858349] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.869844] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.869887] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.869889] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.869891] usb usb4: Product: EHCI Host Controller [ 1.869892] usb usb4: Manufacturer: Linux 4.2.0-23-generic ehci_hcd [ 1.869893] usb usb4: SerialNumber: 0000:00:13.2 [ 1.870031] hub 4-0:1.0: USB hub found [ 1.870035] hub 4-0:1.0: 6 ports detected [ 1.870169] ehci-platform: EHCI generic platform driver [ 1.870179] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.870182] ohci-pci: OHCI PCI platform driver [ 1.870283] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.870287] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5 [ 1.870313] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.929808] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.929810] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.929812] usb usb5: Product: OHCI PCI host controller [ 1.929813] usb usb5: Manufacturer: Linux 4.2.0-23-generic ohci_hcd [ 1.929814] usb usb5: SerialNumber: 0000:00:12.0 [ 1.929936] hub 5-0:1.0: USB hub found [ 1.929951] hub 5-0:1.0: 3 ports detected [ 1.930141] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.930145] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 6 [ 1.930160] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.989760] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.989763] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.989764] usb usb6: Product: OHCI PCI host controller [ 1.989765] usb usb6: Manufacturer: Linux 4.2.0-23-generic ohci_hcd [ 1.989767] usb usb6: SerialNumber: 0000:00:12.1 [ 1.989882] hub 6-0:1.0: USB hub found [ 1.989900] hub 6-0:1.0: 3 ports detected [ 1.990092] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.990096] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 1.990122] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 2.049705] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.049707] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.049709] usb usb7: Product: OHCI PCI host controller [ 2.049710] usb usb7: Manufacturer: Linux 4.2.0-23-generic ohci_hcd [ 2.049711] usb usb7: SerialNumber: 0000:00:13.0 [ 2.049826] hub 7-0:1.0: USB hub found [ 2.049844] hub 7-0:1.0: 3 ports detected [ 2.050040] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.050044] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 8 [ 2.050058] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 2.109659] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.109661] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.109663] usb usb8: Product: OHCI PCI host controller [ 2.109664] usb usb8: Manufacturer: Linux 4.2.0-23-generic ohci_hcd [ 2.109665] usb usb8: SerialNumber: 0000:00:13.1 [ 2.109793] hub 8-0:1.0: USB hub found [ 2.109800] hub 8-0:1.0: 3 ports detected [ 2.109990] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.109995] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9 [ 2.110012] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000 [ 2.153586] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.169625] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.169627] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.169629] usb usb9: Product: OHCI PCI host controller [ 2.169630] usb usb9: Manufacturer: Linux 4.2.0-23-generic ohci_hcd [ 2.169631] usb usb9: SerialNumber: 0000:00:14.5 [ 2.169750] hub 9-0:1.0: USB hub found [ 2.169768] hub 9-0:1.0: 2 ports detected [ 2.169860] ohci-platform: OHCI generic platform driver [ 2.169871] uhci_hcd: USB Universal Host Controller Interface driver [ 2.169916] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.204173] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 2.204174] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 2.204236] usb 4-3: new high-speed USB device number 2 using ehci-pci [ 2.282988] usb 1-1: New USB device found, idVendor=2109, idProduct=3431 [ 2.282991] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.282992] usb 1-1: Product: USB2.0 Hub [ 2.283423] hub 1-1:1.0: USB hub found [ 2.283524] hub 1-1:1.0: 4 ports detected [ 2.355650] usb 4-3: New USB device found, idVendor=0db0, idProduct=3871 [ 2.355657] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.355661] usb 4-3: Product: 802.11 n WLAN [ 2.355665] usb 4-3: Manufacturer: Ralink [ 2.355668] usb 4-3: SerialNumber: 1.0 [ 2.373375] usb 5-1: new low-speed USB device number 2 using ohci-pci [ 2.453397] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.453635] mousedev: PS/2 mouse device common for all mice [ 2.453787] rtc_cmos 00:02: RTC can wake from S4 [ 2.453902] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.453934] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.453940] i2c /dev entries driver [ 2.454011] device-mapper: uevent: version 1.0.3 [ 2.454080] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com [ 2.454095] ledtrig-cpu: registered to indicate activity on CPUs [ 2.454275] PCCT header not found. [ 2.454485] NET: Registered protocol family 10 [ 2.454662] NET: Registered protocol family 17 [ 2.454670] Key type dns_resolver registered [ 2.455283] Loading compiled-in X.509 certificates [ 2.456032] Loaded X.509 cert 'Build time autogenerated kernel key: 5b77c7b2b6447c14c514ab2aee8004bfbd7c3913' [ 2.456042] registered taskstats version 1 [ 2.456055] zswap: loading zswap [ 2.456057] zswap: using zbud pool [ 2.456060] zswap: using lzo compressor [ 2.457942] Key type trusted registered [ 2.461302] Key type encrypted registered [ 2.461307] AppArmor: AppArmor sha1 policy hashing enabled [ 2.461311] ima: No TPM chip found, activating TPM-bypass! [ 2.461328] evm: HMAC attrs: 0x1 [ 2.461598] Magic number: 0:471:790 [ 2.461683] rtc_cmos 00:02: setting system clock to 2016-01-09 15:45:22 UTC (1452354322) [ 2.461849] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.462051] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.462052] EDD information not available. [ 2.462098] PM: Hibernation image not present or could not be loaded. [ 2.462518] Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000) [ 2.462520] Write protecting the kernel read-only data: 12288k [ 2.462698] Freeing unused kernel memory: 32K (ffff8800017f8000 - ffff880001800000) [ 2.462813] Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000) [ 2.473718] random: systemd-udevd urandom read with 7 bits of entropy available [ 2.501586] Floppy drive(s): fd0 is unknown type 13 (usb?) [ 2.510416] ahci 0000:00:11.0: version 3.0 [ 2.510664] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.510671] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.510674] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.510676] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.511279] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000e84000, 74:d4:35:b4:b9:44, XID 0c900800 IRQ 28 [ 2.511282] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.511403] scsi host0: ahci [ 2.511534] scsi host1: ahci [ 2.511673] scsi host2: ahci [ 2.511789] scsi host3: ahci [ 2.511842] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 2.511845] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 2.511847] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 2.511850] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 2.513156] scsi host4: pata_atiixp [ 2.513308] scsi host5: pata_atiixp [ 2.513378] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 2.513380] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 2.520977] FDC 0 is a post-1991 82077 [ 2.526824] AVX version of gcm_enc/dec engaged. [ 2.526826] AES CTR mode by8 optimization enabled [ 2.538222] usb 5-1: New USB device found, idVendor=093a, idProduct=2521 [ 2.538225] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.538227] usb 5-1: Product: USB OPTICAL MOUSE [ 2.546496] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 2.561144] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd [ 2.649747] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=a011 [ 2.649750] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.649751] usb 1-1.1: Product: Deskjet 3050A J611 series [ 2.649753] usb 1-1.1: Manufacturer: HP [ 2.649754] usb 1-1.1: SerialNumber: CN27G6CKY705PJ [ 2.677076] usb 5-2: new low-speed USB device number 3 using ohci-pci [ 2.681049] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN00, max UDMA/133 [ 2.697440] ata6.00: configured for UDMA/100 [ 2.721057] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd [ 2.729039] usb 8-1: new full-speed USB device number 2 using ohci-pci [ 2.808971] tsc: Refined TSC clocksource calibration: 3515.549 MHz [ 2.808978] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32acb1d1385, max_idle_ns: 440795349851 ns [ 2.809933] usb 1-1.3: New USB device found, idVendor=1058, idProduct=0820 [ 2.809935] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 2.809937] usb 1-1.3: Product: My Passport 0820 [ 2.809938] usb 1-1.3: Manufacturer: Western Digital [ 2.809939] usb 1-1.3: SerialNumber: 575848314543344352383035 [ 2.813100] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 2.813224] scsi host6: usb-storage 1-1.3:1.0 [ 2.813282] usbcore: registered new interface driver usb-storage [ 2.814420] usbcore: registered new interface driver uas [ 2.828968] ata3: SATA link down (SStatus 0 SControl 300) [ 2.829011] ata4: SATA link down (SStatus 0 SControl 300) [ 2.832967] ata2: SATA link down (SStatus 0 SControl 300) [ 2.853995] usb 5-2: New USB device found, idVendor=1a2c, idProduct=0c21 [ 2.854002] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.854007] usb 5-2: Product: USB Keyboard [ 2.854010] usb 5-2: Manufacturer: USB [ 2.859028] hidraw: raw HID events driver (C) Jiri Kosina [ 2.876125] usbcore: registered new interface driver usbhid [ 2.876126] usbhid: USB HID core driver [ 2.877604] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:093A:2521.0001/input/input3 [ 2.877765] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:12.0-1/input0 [ 2.877916] input: USB USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:1A2C:0C21.0002/input/input4 [ 2.932936] hid-generic 0003:1A2C:0C21.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:12.0-2/input0 [ 2.933196] input: USB USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.1/0003:1A2C:0C21.0003/input/input5 [ 2.988948] hid-generic 0003:1A2C:0C21.0003: input,hidraw2: USB HID v1.10 Mouse [USB USB Keyboard] on usb-0000:00:12.0-2/input1 [ 3.000852] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.001400] ata1.00: ATA-9: WDC WD10EZEX-22BN5A0, 01.01A01, max UDMA/133 [ 3.001402] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.002090] ata1.00: configured for UDMA/133 [ 3.002290] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-22B 1A01 PQ: 0 ANSI: 5 [ 3.002550] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.002553] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.002571] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.002688] sd 0:0:0:0: [sda] Write Protect is off [ 3.002690] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.002732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.003857] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LN00 PQ: 0 ANSI: 5 [ 3.013075] sr 5:0:0:0: [sr0] scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.013078] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.013196] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.013268] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 3.028275] sda: sda1 sda2 < sda5 > [ 3.028841] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.088729] usb 8-1: New USB device found, idVendor=0db0, idProduct=a871 [ 3.088736] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.808246] clocksource: Switched to clocksource tsc [ 3.812438] scsi 6:0:0:0: Direct-Access WD My Passport 0820 1012 PQ: 0 ANSI: 6 [ 3.812620] scsi 6:0:0:1: Enclosure WD SES Device 1012 PQ: 0 ANSI: 6 [ 3.813891] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.814046] scsi 6:0:0:1: Attached scsi generic sg3 type 13 [ 3.814053] sd 6:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.814425] sd 6:0:0:0: [sdb] Write Protect is off [ 3.814427] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 3.814817] sd 6:0:0:0: [sdb] No Caching mode page found [ 3.814870] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 9.345727] sdb: sdb1 [ 9.348053] sd 6:0:0:0: [sdb] Attached SCSI disk [ 9.377688] ses 6:0:0:1: Attached Enclosure device [ 3696.852870] random: nonblocking pool is initialized [ 3700.830593] NET: Registered protocol family 38 [ 3725.385238] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 3726.150646] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 3726.253272] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3726.253431] systemd[1]: Detected architecture x86-64. [ 3726.253631] systemd[1]: Set hostname to . [ 3726.513382] systemd[1]: Created slice Root Slice. [ 3726.513456] systemd[1]: Listening on Journal Socket. [ 3726.513481] systemd[1]: Listening on LVM2 poll daemon socket. [ 3726.513551] systemd[1]: Created slice System Slice. [ 3726.513623] systemd[1]: Created slice system-getty.slice. [ 3726.513679] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3726.514092] systemd[1]: Started Braille Device Support. [ 3726.514397] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 3726.514899] systemd[1]: Mounting Huge Pages File System... [ 3726.514947] systemd[1]: Listening on Journal Socket (/dev/log). [ 3726.515027] systemd[1]: Created slice User and Session Slice. [ 3726.515581] systemd[1]: Starting Setup Virtual Console... [ 3726.516085] systemd[1]: Starting Uncomplicated firewall... [ 3726.516581] systemd[1]: Starting Increase datagram queue length... [ 3726.517086] systemd[1]: Mounting POSIX Message Queue File System... [ 3726.517658] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 3726.518158] systemd[1]: Started Read required files in advance. [ 3726.518273] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3726.518304] systemd[1]: Reached target Slices. [ 3726.518319] systemd[1]: Reached target User and Group Name Lookups. [ 3726.518353] systemd[1]: Listening on LVM2 metadata daemon socket. [ 3726.518413] systemd[1]: Listening on Journal Audit Socket. [ 3726.518512] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3726.564355] systemd[1]: Starting Load Kernel Modules... [ 3726.564398] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3726.564916] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3726.565430] systemd[1]: Mounting Debug File System... [ 3726.565473] systemd[1]: Listening on udev Kernel Socket. [ 3726.565518] systemd[1]: Listening on udev Control Socket. [ 3726.566046] systemd[1]: Starting udev Coldplug all Devices... [ 3726.566070] systemd[1]: Reached target Remote File Systems (Pre). [ 3726.566108] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3726.566152] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3726.609356] systemd[1]: Started Setup Virtual Console. [ 3726.733922] systemd[1]: Started udev Coldplug all Devices. [ 3726.764810] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 3726.765010] systemd[1]: Started Uncomplicated firewall. [ 3726.765578] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3726.819797] systemd[1]: Mounted POSIX Message Queue File System. [ 3726.819867] systemd[1]: Mounted Huge Pages File System. [ 3726.819912] systemd[1]: Mounted Debug File System. [ 3726.820474] systemd[1]: Started Increase datagram queue length. [ 3726.824029] systemd[1]: Listening on Syslog Socket. [ 3726.824514] systemd[1]: Starting Journal Service... [ 3727.495504] lp: driver loaded but no devices found [ 3727.514584] ppdev: user-space parallel port driver [ 3727.553527] parport_pc 00:05: reported by Plug and Play ACPI [ 3727.553597] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 3727.601603] systemd[1]: Started LVM2 metadata daemon. [ 3727.650224] lp0: using parport0 (interrupt-driven). [ 3727.667475] systemd[1]: Started Journal Service. [ 3730.088621] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 3730.327949] systemd-journald[448]: Received request to flush runtime journal from PID 1 [ 3730.428405] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150619/utaddress-254) [ 3730.428412] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3730.461612] wmi: Mapper loaded [ 3730.625642] MCE: In-kernel MCE decoding enabled. [ 3730.637638] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3730.761601] EDAC MC: Ver: 3.0.0 [ 3730.801831] AMD64 EDAC driver v3.4.0 [ 3730.801856] EDAC amd64: DRAM ECC disabled. [ 3730.801863] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 3730.877986] Bluetooth: Core ver 2.20 [ 3730.878009] NET: Registered protocol family 31 [ 3730.878011] Bluetooth: HCI device and connection manager initialized [ 3730.878014] Bluetooth: HCI socket layer initialized [ 3730.878017] Bluetooth: L2CAP socket layer initialized [ 3730.878023] Bluetooth: SCO socket layer initialized [ 3730.907215] kvm: disabled by bios [ 3731.646058] [drm] Initialized drm 1.1.0 20060810 [ 3731.648477] usbcore: registered new interface driver btusb [ 3731.674842] snd_hda_intel 0000:01:00.1: Disabling MSI [ 3731.674849] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 3731.931627] snd_hda_codec_via hdaudioC0D0: autoconfig for VT2020: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:line [ 3731.931631] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3731.931633] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0) [ 3731.931634] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0 [ 3731.931636] snd_hda_codec_via hdaudioC0D0: dig-out=0x2e/0x0 [ 3731.931637] snd_hda_codec_via hdaudioC0D0: inputs: [ 3731.931639] snd_hda_codec_via hdaudioC0D0: Front Mic=0x29 [ 3731.931640] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x2b [ 3731.931642] snd_hda_codec_via hdaudioC0D0: Line=0x2a [ 3731.940774] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 3731.940839] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 3731.940896] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 3731.940952] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 3731.945682] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 3732.138365] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 3732.138443] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 3732.138516] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 3733.460534] usb 4-3: reset high-speed USB device number 2 using ehci-pci [ 3733.603251] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 3733.632264] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 3733.678596] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 3733.678880] usbcore: registered new interface driver rt2800usb [ 3733.726884] nvidia: module license 'NVIDIA' taints kernel. [ 3733.726886] Disabling lock debugging due to kernel taint [ 3733.732191] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 3733.736418] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 3733.736634] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 3733.736640] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.63 Sat Nov 7 21:25:42 PST 2015 [ 3733.746465] rt2800usb 4-3:1.0 wlx6c71d99da151: renamed from wlan0 [ 3734.089801] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 3734.154986] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 3734.178378] cfg80211: World regulatory domain updated: [ 3734.178381] cfg80211: DFS Master region: unset [ 3734.178383] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3734.178385] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3734.178386] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3734.178387] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 3734.178389] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 3734.178391] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 3734.178392] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 3734.178393] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 3734.178395] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 3736.931204] audit: type=1400 audit(1452358060.527:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=767 comm="apparmor_parser" [ 3736.931210] audit: type=1400 audit(1452358060.527:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=767 comm="apparmor_parser" [ 3737.079979] audit: type=1400 audit(1452358060.675:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=767 comm="apparmor_parser" [ 3737.079986] audit: type=1400 audit(1452358060.675:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=767 comm="apparmor_parser" [ 3737.079991] audit: type=1400 audit(1452358060.675:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=767 comm="apparmor_parser" [ 3737.079998] audit: type=1400 audit(1452358060.675:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=767 comm="apparmor_parser" [ 3737.665996] audit: type=1400 audit(1452358061.259:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=767 comm="apparmor_parser" [ 3737.666004] audit: type=1400 audit(1452358061.259:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=767 comm="apparmor_parser" [ 3737.666009] audit: type=1400 audit(1452358061.259:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=767 comm="apparmor_parser" [ 3737.666013] audit: type=1400 audit(1452358061.259:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=767 comm="apparmor_parser" [ 3741.224410] Adding 8367612k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:8367612k FS [ 3744.823158] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3744.823160] Bluetooth: BNEP filters: protocol multicast [ 3744.823164] Bluetooth: BNEP socket layer initialized [ 3745.162487] cgroup: new mount options do not match the existing superblock, will be ignored [ 3745.650479] usblp 1-1.1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xA011 [ 3745.650510] usbcore: registered new interface driver usblp [ 3746.061874] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 3746.402300] r8169 0000:03:00.0 enp3s0: link down [ 3746.402319] r8169 0000:03:00.0 enp3s0: link down [ 3746.402334] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 3746.404391] IPv6: ADDRCONF(NETDEV_UP): wlx6c71d99da151: link is not ready [ 3746.404431] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 3746.450106] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 3746.856054] IPv6: ADDRCONF(NETDEV_UP): wlx6c71d99da151: link is not ready [ 3746.958881] IPv6: ADDRCONF(NETDEV_UP): wlx6c71d99da151: link is not ready [ 3748.724484] r8169 0000:03:00.0 enp3s0: link up [ 3748.724493] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 3750.679737] usblp0: removed [ 3750.680737] usblp 1-1.1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xA011 [ 3755.438880] Bluetooth: RFCOMM TTY layer initialized [ 3755.438888] Bluetooth: RFCOMM socket layer initialized [ 3755.438892] Bluetooth: RFCOMM ver 1.11 [ 3763.753688] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 3763.758510] ISOFS: changing to secondary root