Comment 0 for bug 1327908

Revision history for this message
JSE (jse.nl) wrote :

HP has a newer firmware on their NC375T server nics: 4.0.593
This generates an error at the startup of Ubuntu Server 14.04 LTS
The version of phanfw.bin seems to be older.

[ 16.573260] QLogic/NetXen Network Driver v4.0.82
[ 16.811117] netxen_nic 0000:07:00.0: 2MB memory map

[ 16.812455] netxen_nic 0000:07:00.0: phanfw.bin: firmware is older than flash
[ 16.818949] netxen_nic 0000:07:00.0: Direct firmware load failed with error -2
[ 16.818950] netxen_nic 0000:07:00.0: Falling back to user helper

[ 23.138390] netxen_nic 0000:07:00.0: loading firmware from flash
[ 27.586070] netxen_nic 0000:07:00.0: Gen2 strapping detected
[ 30.185964] netxen_nic 0000:07:00.0: using 64-bit dma mask
[ 30.373956] netxen_nic: Quad Gig LP Board S/N TI13BK1960 Chip rev 0x42
[ 30.450969] netxen_nic 0000:07:00.0: Driver v4.0.82, firmware v4.0.593 [legacy]
[ 39.718557] netxen_nic 0000:07:00.0: irq 67 for MSI/MSI-X
[ 39.718561] netxen_nic 0000:07:00.0: irq 68 for MSI/MSI-X
[ 39.718564] netxen_nic 0000:07:00.0: irq 69 for MSI/MSI-X
[ 39.718567] netxen_nic 0000:07:00.0: irq 70 for MSI/MSI-X
[ 39.718605] netxen_nic 0000:07:00.0: using msi-x interrupts
[ 39.780399] netxen_nic 0000:07:00.0: non ULA adapter
[ 39.841095] netxen_nic 0000:07:00.0: eth0: GbE port initialized
[ 39.901172] netxen_nic 0000:07:00.1: 2MB memory map
[ 39.959403] netxen_nic 0000:07:00.1: using 64-bit dma mask
[ 40.117279] netxen_nic 0000:07:00.1: Driver v4.0.82, firmware v4.0.593 [legacy]
[ 40.174172] netxen_nic 0000:07:00.1: irq 71 for MSI/MSI-X
[ 40.174175] netxen_nic 0000:07:00.1: irq 72 for MSI/MSI-X
[ 40.174178] netxen_nic 0000:07:00.1: irq 73 for MSI/MSI-X
[ 40.174181] netxen_nic 0000:07:00.1: irq 74 for MSI/MSI-X
[ 40.174209] netxen_nic 0000:07:00.1: using msi-x interrupts
[ 40.229992] netxen_nic 0000:07:00.1: eth1: GbE port initialized
[ 40.284766] netxen_nic 0000:07:00.2: 2MB memory map
[ 40.339836] netxen_nic 0000:07:00.2: using 64-bit dma mask
[ 40.465258] netxen_nic 0000:07:00.2: Driver v4.0.82, firmware v4.0.593 [legacy]
[ 40.522359] netxen_nic 0000:07:00.2: irq 75 for MSI/MSI-X
[ 40.522363] netxen_nic 0000:07:00.2: irq 76 for MSI/MSI-X
[ 40.522365] netxen_nic 0000:07:00.2: irq 77 for MSI/MSI-X
[ 40.522368] netxen_nic 0000:07:00.2: irq 78 for MSI/MSI-X
[ 40.522392] netxen_nic 0000:07:00.2: using msi-x interrupts
[ 40.578742] netxen_nic 0000:07:00.2: eth2: GbE port initialized
[ 40.634802] netxen_nic 0000:07:00.3: 2MB memory map
[ 40.690423] netxen_nic 0000:07:00.3: using 64-bit dma mask
[ 40.825233] netxen_nic 0000:07:00.3: Driver v4.0.82, firmware v4.0.593 [legacy]
[ 40.882915] netxen_nic 0000:07:00.3: irq 79 for MSI/MSI-X
[ 40.882919] netxen_nic 0000:07:00.3: irq 80 for MSI/MSI-X
[ 40.882922] netxen_nic 0000:07:00.3: irq 81 for MSI/MSI-X
[ 40.882925] netxen_nic 0000:07:00.3: irq 82 for MSI/MSI-X
[ 40.882951] netxen_nic 0000:07:00.3: using msi-x interrupts
[ 40.939825] netxen_nic 0000:07:00.3: eth3: GbE port initialized

# ethtool -i p4p1
driver: netxen_nic
version: 4.0.82
firmware-version: 4.0.593
bus-info: 0000:07:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no

# ./nxflash.bin -i p4p1 --info
Board Type: 0x24 (NC375T PCI Express Quad Port Gigabit Server Adapter)
Board Chip Rev: B2
Serial Id: TI13BK1960
Efuse ID: 0x0000000000000000
Firmware version(on Flash): 4.0.593
Active Firmware version: 4.0.593
Driver version: 0.0.0
BIOS version: 2.1.0
MAC Addr 0: 78:AC:C0:10:F9:DC
Subsystem ID: 0x1740103c
PXE Status 0: Disabled
WOL Status 0: Disabled