[1.] One line summary of the problem:

Realtek RTL8191SU wireless don't works wep hidden with linux-firmware
1.94 

[2.] Full description of the problem/report:
i have this usb Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN
Adapter i have a hidden wireless with WEP 40/128

I have this problem on ubuntu 12.10 (default), fedora 17 after yum
upgrade firmware, in sabayon 10 after upgrade firmware, fedora 18
(default) in platform 32 or 64 bit ... don't works

when i try to connect with network manager say me to enter the password
but it doesn't connect and ask me the password again, again ......

if i try to type
sudo iwconfig wlan0 key on
Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Operation not supported.

if i remove the last linux-firmware and install the
linux-firmware_1.79.1_all.deb all is ok, the net goes ;)

thanks

[3.] Keywords (i.e., modules, networking, kernel):
linux-firmware wep 40/128 password error 

[4.] Kernel version (from /proc/version):
While booted into the mainline kernel you tested in your bug report,
please execute the following in a terminal and paste the results:
cat /proc/version
Linux version 3.6.0-030600-generic (apw@gomeisa) (gcc version 4.6.3 
(Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201209302035 SMP Mon Oct 1 00:36:01
UTC 2012


[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt) This is only relevant if
you had a oops crash (ex. flashing Caps Lock light). If you have a
kernel oops, one may consult
http://www.kernel.org/doc/Documentation/oops-tracing.txt . If this is
too daunting please ask for help in your bug report, and of the Ubuntu
community.

[6.] A small shell script or example program which triggers the problem
(if possible) This is for advanced community members. If you feel
comfortable enough to do this, please do it. It is not crtical if this
is beyond your skill level.

[7.] Environment
Please execute the following in a terminal, and paste the results:
lsb_release -rd

Description:	Ubuntu 12.10
Release:	12.10

[7.1.] Software (add the output of the ver_linux script here)
For Ubuntu, this is found in the directory:
/usr/src/linux-headers-<VERSION>/scripts

where <VERSION> is the version of the kernel you are using, found in
the directory /usr/src. You may run the script by changing to the
directory via a terminal, and paste the results: sh ver_linux

f some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
Linux dandan-desktop 3.6.0-030600-generic #201209302035 SMP Mon Oct 1
00:36:01 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux 
Gnu C                  4.7
Gnu make               3.81
binutils               2.22.90.20120924
util-linux             2.20.1
mount                  support
module-init-tools      3.16
e2fsprogs              1.42.5
pcmciautils            018
PPP                    2.4.5
Linux C Library        2.15
Dynamic linker (ldd)   2.15
Procps                 3.3.3
Net-tools              1.60
Kbd                    1.15.3
Sh-utils               8.13
wireless-tools         30
Modules Loaded         nls_iso8859_1 usb_storage bnep rfcomm bluetooth
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm
snd_seq_midi snd_rawmidi i915 snd_seq_midi_event snd_seq snd_timer
snd_seq_device r8712u drm_kms_helper binfmt_misc drm snd soundcore
snd_page_alloc psmouse i2c_algo_bit microcode serio_raw lpc_ich video
mac_hid ppdev parport_pc lp parport coretemp r8169


[7.2.] Processor information (from /proc/cpuinfo):
Execute the following in a terminal, and paste the results:
cat /proc/cpuinfo

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 28
model name	: Intel(R) Atom(TM) CPU D525   @ 1.80GHz
stepping	: 10
microcode	: 0x107
cpu MHz		: 1799.991
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl
aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe
lahf_lm dtherm bogomips	: 3599.98 clflush size	: 64
cache_alignment	: 64 address sizes	: 36 bits physical, 48
bits virtual power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 28
model name	: Intel(R) Atom(TM) CPU D525   @ 1.80GHz
stepping	: 10
microcode	: 0x107
cpu MHz		: 1799.991
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 2
apicid		: 1
initial apicid	: 1
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl
aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe
lahf_lm dtherm bogomips	: 3599.98 clflush size	: 64
cache_alignment	: 64 address sizes	: 36 bits physical, 48
bits virtual power management:

processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 28
model name	: Intel(R) Atom(TM) CPU D525   @ 1.80GHz
stepping	: 10
microcode	: 0x107
cpu MHz		: 1799.991
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 1
cpu cores	: 2
apicid		: 2
initial apicid	: 2
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl
aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe
lahf_lm dtherm bogomips	: 3599.98 clflush size	: 64
cache_alignment	: 64 address sizes	: 36 bits physical, 48
bits virtual power management:

processor	: 3
vendor_id	: GenuineIntel
cpu family	: 6
model		: 28
model name	: Intel(R) Atom(TM) CPU D525   @ 1.80GHz
stepping	: 10
microcode	: 0x107
cpu MHz		: 1799.991
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 1
cpu cores	: 2
apicid		: 3
initial apicid	: 3
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl
aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe
lahf_lm dtherm bogomips	: 3599.98 clflush size	: 64
cache_alignment	: 64 address sizes	: 36 bits physical, 48
bits virtual power management:


[7.3.] Module information (from /proc/modules):
Execute the following in a terminal, and paste the results:
cat /proc/modules

bnep 18315 2 - Live 0x0000000000000000
rfcomm 47922 4 - Live 0x0000000000000000
bluetooth 218412 10 bnep,rfcomm, Live 0x0000000000000000
snd_hda_codec_realtek 79668 1 - Live 0x0000000000000000
snd_hda_intel 34147 4 - Live 0x0000000000000000
snd_hda_codec 135374 2 snd_hda_codec_realtek,snd_hda_intel, Live
0x0000000000000000 binfmt_misc 17540 1 - Live 0x0000000000000000
snd_hwdep 13668 1 snd_hda_codec, Live 0x0000000000000000
snd_pcm 97661 2 snd_hda_intel,snd_hda_codec, Live 0x0000000000000000
snd_seq_midi 13324 0 - Live 0x0000000000000000
i915 550110 3 - Live 0x0000000000000000
snd_rawmidi 30749 1 snd_seq_midi, Live 0x0000000000000000
snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000
snd_seq 61897 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000
r8712u 189671 0 - Live 0x0000000000000000 (C)
snd_timer 29989 2 snd_pcm,snd_seq, Live 0x0000000000000000
snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live
0x0000000000000000 drm_kms_helper 46931 1 i915, Live 0x0000000000000000
drm 277074 4 i915,drm_kms_helper, Live 0x0000000000000000
snd 79391 17
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device,
Live 0x0000000000000000 soundcore 15091 1 snd, Live 0x0000000000000000
snd_page_alloc 18572 2 snd_hda_intel,snd_pcm, Live 0x0000000000000000
i2c_algo_bit 13564 1 i915, Live 0x0000000000000000 microcode 23040 0 -
Live 0x0000000000000000 psmouse 92362 0 - Live 0x0000000000000000
serio_raw 13215 0 - Live 0x0000000000000000
ppdev 17113 0 - Live 0x0000000000000000
video 19412 1 i915, Live 0x0000000000000000
lpc_ich 17144 0 - Live 0x0000000000000000
mac_hid 13253 0 - Live 0x0000000000000000
parport_pc 32866 1 - Live 0x0000000000000000
lp 17799 0 - Live 0x0000000000000000
parport 46562 3 ppdev,parport_pc,lp, Live 0x0000000000000000
coretemp 13554 0 - Live 0x0000000000000000
r8169 68885 0 - Live 0x0000000000000000


[7.4.] Loaded driver and hardware information
(/proc/ioports, /proc/iomem) Execute the following in a terminal, and
paste the results: 
cat /proc/ioports
0000-0cf7 : PCI Bus 0000:00
  0000-001f : dma1
  0020-0021 : pic1
  0040-0043 : timer0
  0050-0053 : timer1
  0060-0060 : keyboard
  0064-0064 : keyboard
  0070-0071 : rtc0
  0080-008f : dma page reg
  00a0-00a1 : pic2
  00c0-00df : dma2
  00f0-00ff : fpu
  0295-0296 : pnp 00:06
  02f8-02ff : serial
  0378-037a : parport0
  03f8-03ff : serial
  0400-047f : pnp 00:06
    0400-0403 : ACPI PM1a_EVT_BLK
    0404-0405 : ACPI PM1a_CNT_BLK
    0408-040b : ACPI PM_TMR
    0410-0415 : ACPI CPU throttle
    0420-0420 : ACPI PM2_CNT_BLK
    0428-042f : ACPI GPE0_BLK
    0430-0433 : iTCO_wdt
    0460-047f : iTCO_wdt
  0500-053f : pnp 00:06
  0680-06ff : pnp 00:06
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
  1000-1fff : PCI Bus 0000:01
    1000-10ff : 0000:01:00.0
      1000-10ff : r8169
  2000-201f : 0000:00:1f.3
  2020-203f : 0000:00:1d.3
    2020-203f : uhci_hcd
  2040-205f : 0000:00:1d.2
    2040-205f : uhci_hcd
  2060-207f : 0000:00:1d.1
    2060-207f : uhci_hcd
  2080-209f : 0000:00:1d.0
    2080-209f : uhci_hcd
  20a0-20af : 0000:00:1f.2
    20a0-20af : ata_piix
  20b0-20b7 : 0000:00:1f.2
    20b0-20b7 : ata_piix
  20b8-20bf : 0000:00:1f.2
    20b8-20bf : ata_piix
  20c0-20c7 : 0000:00:02.0
  20c8-20cb : 0000:00:1f.2
    20c8-20cb : ata_piix
  20cc-20cf : 0000:00:1f.2
    20cc-20cf : ata_piix
  3000-3fff : PCI Bus 0000:02
  4000-4fff : PCI Bus 0000:03
  5000-5fff : PCI Bus 0000:04

cat /proc/iomem
00000000-0000ffff : reserved
00010000-0008efff : System RAM
0008f000-0008ffff : reserved
00090000-0009ebff : System RAM
0009ec00-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000c7fff : Video ROM
000ce000-000cefff : Adapter ROM
000e0000-000fffff : reserved
  000f0000-000fffff : System ROM
00100000-cee96fff : System RAM
  01000000-016aa86a : Kernel code
  016aa86b-01ce017f : Kernel data
  01dd6000-01f2ffff : Kernel bss
cee97000-ceebefff : reserved
ceebf000-cef46fff : System RAM
cef47000-cefbefff : ACPI Non-volatile Storage
cefbf000-ceff0fff : System RAM
ceff1000-ceffefff : ACPI Tables
cefff000-ceffffff : System RAM
cf000000-cfffffff : reserved
d0000000-f7ffffff : PCI Bus 0000:00
  d0000000-dfffffff : 0000:00:02.0
  e0000000-e00fffff : PCI Bus 0000:01
    e0000000-e0003fff : 0000:01:00.0
      e0000000-e0003fff : r8169
    e0004000-e0004fff : 0000:01:00.0
      e0004000-e0004fff : r8169
  e0100000-e01fffff : 0000:00:02.0
  e0200000-e027ffff : 0000:00:02.0
  e0280000-e0283fff : 0000:00:1b.0
    e0280000-e0283fff : ICH HD audio
  e0284000-e02843ff : 0000:00:1f.2
  e0284400-e02847ff : 0000:00:1d.7
    e0284400-e02847ff : ehci_hcd
  e0285000-e0285fff : Intel Flush Page
  e0288000-e028bfff : i915 MCHBAR
  e0300000-e06fffff : PCI Bus 0000:01
  e0700000-e08fffff : PCI Bus 0000:02
  e0900000-e0afffff : PCI Bus 0000:02
  e0b00000-e0cfffff : PCI Bus 0000:03
  e0d00000-e0efffff : PCI Bus 0000:03
  e0f00000-e10fffff : PCI Bus 0000:04
  e1100000-e12fffff : PCI Bus 0000:04
f8000000-fbffffff : PCI MMCONFIG 0000 [bus 00-3f]
  f8000000-fbffffff : reserved
    f8000000-fbffffff : pnp 00:01
fec00000-fec003ff : IOAPIC 0
fed00000-fed003ff : HPET 0
fed14000-fed17fff : pnp 00:01
fed18000-fed18fff : pnp 00:01
fed19000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:01
  fed1f410-fed1f414 : iTCO_wdt
fee00000-fee00fff : Local APIC
fff00000-ffffffff : reserved
  fff00000-ffffffff : pnp 00:01
100000000-12fffffff : System RAM

[7.5.] PCI information ('lspci -vvv' as root)
Execute the following via a terminal, and paste the results:
sudo lspci -vvv

00:00.0 Host bridge: Intel Corporation Atom Processor
D4xx/D5xx/N4xx/N5xx DMI Bridge (rev 02) Subsystem: Intel Corporation
Device 574d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=08
<?> Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation Atom Processor
D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (rev 02) (prog-if 00
[VGA controller]) Subsystem: Intel Corporation Device 574d Control:
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
Interrupt: pin A routed to IRQ 45 Region 0: Memory at e0200000 (32-bit,
non-prefetchable) [size=512K] Region 1: I/O ports at 20c0 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at e0100000 (32-bit, non-prefetchable)
[size=1M] Expansion ROM at <unassigned> [disabled]
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 41e1
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable-
DSel=0 DScale=0 PME- Kernel driver in use: i915
	Kernel modules: i915

00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High
Definition Audio Controller (rev 01) Subsystem: Intel Corporation
Device d625 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF-
FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to
IRQ 46 Region 0: Memory at e0280000 (64-bit, non-prefetchable)
[size=16K] Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable-
DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1
Maskable- 64bit+ Address: 00000000fee0f00c  Data: 4142
	Capabilities: [70] Express (v1) Root Complex Integrated
Endpoint, MSI 00 DevCap:	MaxPayload 128 bytes, PhantFunc 0,
Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal-
Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend- LnkCap:	Port #0, Speed unknown, Width x0,
ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep-
BwNot- LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train-
SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual
Channel Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed
TC/VC=01 Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=1 ArbSelect=Fixed
TC/VC=80 Status:	NegoPending- InProgress-
	Capabilities: [130 v1] Root Complex Link
		Desc:	PortNumber=0f ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00
TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr:	00000000fed1c000 Kernel driver in use: snd_hda_intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port
1 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus:
primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind
bridge: 00001000-00001fff Memory behind bridge: e0300000-e06fffff
	Prefetchable memory behind bridge:
00000000e0000000-00000000e00fffff Secondary status: 66MHz- FastB2B-
ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl:
Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1)
Root Port (Slot+), MSI 00 DevCap:	MaxPayload 128 bytes,
PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal-
Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend- LnkCap:	Port #1, Speed 2.5GT/s, Width x1,
ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+
BwNot- LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train-
SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap:	AttnBtn- PwrCtrl-
MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #1, PowerLimit 10.000W;
Interlock- NoCompl- SltCtl:	Enable: AttnBtn- PwrFlt- MRL-
PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd
Unknown, Power- Interlock- SltSta:	Status: AttnBtn- PowerFlt-
MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible- RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4191
	Capabilities: [90] Subsystem: Intel Corporation Device 574d
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable-
DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed+ WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed
TC/VC=01 Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable- ID=0 ArbSelect=Fixed
TC/VC=00 Status:	NegoPending- InProgress-
	Capabilities: [180 v1] Root Complex Link
		Desc:	PortNumber=01 ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00
TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr:	00000000fed1c001 Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port
2 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus:
primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind
bridge: 00003000-00003fff Memory behind bridge: e0700000-e08fffff
	Prefetchable memory behind bridge:
00000000e0900000-00000000e0afffff Secondary status: 66MHz- FastB2B-
ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl:
Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1)
Root Port (Slot+), MSI 00 DevCap:	MaxPayload 128 bytes,
PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal-
Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend- LnkCap:	Port #2, Speed 2.5GT/s, Width x1,
ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+
BwNot- LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap:	AttnBtn- PwrCtrl-
MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #2, PowerLimit 10.000W;
Interlock- NoCompl- SltCtl:	Enable: AttnBtn- PwrFlt- MRL-
PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd
Unknown, Power- Interlock- SltSta:	Status: AttnBtn- PowerFlt-
MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible- RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 41a1
	Capabilities: [90] Subsystem: Intel Corporation Device 574d
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable-
DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed+ WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed
TC/VC=01 Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable- ID=0 ArbSelect=Fixed
TC/VC=00 Status:	NegoPending- InProgress-
	Capabilities: [180 v1] Root Complex Link
		Desc:	PortNumber=02 ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00
TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr:	00000000fed1c001 Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port
3 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus:
primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind
bridge: 00004000-00004fff Memory behind bridge: e0b00000-e0cfffff
	Prefetchable memory behind bridge:
00000000e0d00000-00000000e0efffff Secondary status: 66MHz- FastB2B-
ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl:
Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1)
Root Port (Slot+), MSI 00 DevCap:	MaxPayload 128 bytes,
PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal-
Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend- LnkCap:	Port #3, Speed 2.5GT/s, Width x1,
ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+
BwNot- LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap:	AttnBtn- PwrCtrl-
MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #3, PowerLimit 10.000W;
Interlock- NoCompl- SltCtl:	Enable: AttnBtn- PwrFlt- MRL-
PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd
Unknown, Power- Interlock- SltSta:	Status: AttnBtn- PowerFlt-
MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible- RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 41b1
	Capabilities: [90] Subsystem: Intel Corporation Device 574d
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable-
DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed+ WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed
TC/VC=01 Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable- ID=0 ArbSelect=Fixed
TC/VC=00 Status:	NegoPending- InProgress-
	Capabilities: [180 v1] Root Complex Link
		Desc:	PortNumber=03 ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00
TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr:	00000000fed1c001 Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port
4 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus:
primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind
bridge: 00005000-00005fff Memory behind bridge: e0f00000-e10fffff
	Prefetchable memory behind bridge:
00000000e1100000-00000000e12fffff Secondary status: 66MHz- FastB2B-
ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl:
Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1)
Root Port (Slot+), MSI 00 DevCap:	MaxPayload 128 bytes,
PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal-
Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend- LnkCap:	Port #4, Speed 2.5GT/s, Width x1,
ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+
BwNot- LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap:	AttnBtn- PwrCtrl-
MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #4, PowerLimit 10.000W;
Interlock- NoCompl- SltCtl:	Enable: AttnBtn- PwrFlt- MRL-
PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd
Unknown, Power- Interlock- SltSta:	Status: AttnBtn- PowerFlt-
MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible- RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 41c1
	Capabilities: [90] Subsystem: Intel Corporation Device 574d
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable-
DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed+ WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed
TC/VC=01 Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable- ID=0 ArbSelect=Fixed
TC/VC=00 Status:	NegoPending- InProgress-
	Capabilities: [180 v1] Root Complex Link
		Desc:	PortNumber=04 ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00
TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr:	00000000fed1c001 Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation
Device 574d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 0 Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 2080 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation
Device 574d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 0 Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 2060 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation
Device 574d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 0 Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 2040 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation
Device 574d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 0 Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at 2020 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation
Device 574d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 0 Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e0284400 (32-bit, non-prefetchable)
[size=1K] Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable-
DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
(prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05,
subordinate=05, sec-latency=0 I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge:
00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50]
Subsystem: Intel Corporation Device 574d

00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev
01) Subsystem: Intel Corporation Device 574d
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c
<?> Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA
Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP
PriO]) Subsystem: Intel Corporation Device 574d Control: I/O+ Mem+
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 20b8 [size=8]
	Region 1: I/O ports at 20cc [size=4]
	Region 2: I/O ports at 20b0 [size=8]
	Region 3: I/O ports at 20c8 [size=4]
	Region 4: I/O ports at 20a0 [size=16]
	Region 5: Memory at e0284000 (32-bit, non-prefetchable)
[size=1K] Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable-
DSel=0 DScale=0 PME- Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev
01) Subsystem: Intel Corporation Device 574d
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 2000
[size=32] Kernel modules: i2c-i801

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Intel Corporation Device d625 Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at 1000 [size=256]
	Region 2: Memory at e0004000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at e0000000 (64-bit, prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable-
DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/1
Maskable- 64bit+ Address: 00000000fee0f00c  Data: 41d1
	Capabilities: [70] Express (v2) Endpoint, MSI 01
		DevCap:	MaxPayload 256 bytes, PhantFunc 0,
Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+
FLReset- DevCtl:	Report errors: Correctable- Non-Fatal- Fatal-
Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 4096 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+
AuxPwr+ TransPend- LnkCap:	Port #0, Speed 2.5GT/s, Width x1,
ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM+ Surprise- LLActRep-
BwNot- LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not
Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms,
TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal
Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance
De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-,
EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [b0] MSI-X:
Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000
		PBA: BAR=4 offset=00000800
	Capabilities: [d0] Vital Product Data
		Unknown small resource type 00, will not decode more.
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk:	DLP-
SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol- UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO-
CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:	RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel Caps:	LPEVC=0
RefClk=100ns PATEntryBits=1 Arb:	Fixed- WRR32- WRR64- WRR128-
Ctrl:	ArbSelect=Fixed Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1
RejSnoopTrans- Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed
TC/VC=01 Status:	NegoPending- InProgress-
	Capabilities: [160 v1] Device Serial Number
01-00-00-00-68-4c-e0-00 Kernel driver in use: r8169
	Kernel modules: r8169


[7.6.] SCSI information (from /proc/scsi/scsi)
Execute the following via a terminal, and paste the results:
cat /proc/scsi/scsi

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: SAMSUNG HM251HI  Rev: 2AJ1
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: TSSTcorp Model: CDDVDW SN-208BB  Rev: SB01
  Type:   CD-ROM                           ANSI  SCSI revision: 05


[7.7.] Other information that might be relevant to the problem (please
look in /proc and include all information that you think to be
relevant): Execute the following via a terminal, and paste the results:
ls /proc

1     1381  1470  2     29   565  9            fb             schedstat
10    1386  1479  20    3    57   917          filesystems    scsi
1006  1388  1484  2010  30   58   929          fs             self
1008  1390  15    2027  31   59   936          interrupts     slabinfo
1020  1394  1556  2120  316  60   971          iomem          softirqs
1032  1396  1650  2121  318  617  972          ioports        stat
1044  1398  17    2122  32   692  974          irq            swaps
1047  14    1766  2128  33   7    979          kallsyms       sys
1051  1400  1768  2178  34   713  980          kcore
sysrq-trigger 1062  1402  1772  2198  35   740  983
key-users      sysvipc 1071  1404  1784  22    36   752  984
kmsg           timer_list 12    1406  18    2210  37   758
acpi         kpagecount     timer_stats 1202  1416  1811  2278  38
759  asound       kpageflags     tty 1216  1422  1813  228   39   795
buddyinfo    latency_stats  uptime 1218  1424  1822  229   40   8
bus          loadavg        version 1226  1425  1823  23    41   80
cgroups      locks          vmallocinfo 1229  1430  1842  2313  42
81   cmdline      mdstat         vmstat 1253  1433  1849  2317  43
813  consoles     meminfo        zoneinfo 13    1435  1851  2319  434
82   cpuinfo      misc 1328  1436  1856  2320  435  83   crypto
modules1360  1440  1859  2381  44   854  devices      mounts
1363  1449  1860  24    45   857  diskstats    mtrr
1364  1453  19    25    5    86   dma          net
1371  1459  1921  26    54   870  dri          pagetypeinfo
1374  1462  1924  27    55   871  driver       partitions
1378  1468  1978  28    564  873  execdomains  sched_debug



[X.] Other notes, patches, fixes, workarounds:
It is imperative that you include any further debugging information
from http://www.kernel.org/doc/Documentation/ using the mainline
kernel. Failure to provide the information from the documentation
mentioned for the driver or subsystem your reporting a bug in, may
likely result in negative unintended consequences. In addition, please
be 100% certain you have included all relevant comment information not
included in the Bug Description and a kernel developer should review.
They are some of the busiest people in the Linux space. They do not
need to dive through downstream bug reports to find something that
should have been provided when the bug was first filed. If you are
unsure about anything asked for, or intend on not following this
format, please do not file a report. Instead, continue to ask questions
in Launchpad, and of the Ubuntu community, until all issues are cleared
up.