Jan 18 08:54:39 lynx dhclient: DHCPREQUEST of 192.168.1.102 on wlan0 to 192.168.1.1 port 67
Jan 18 08:54:39 lynx dhclient: DHCPACK of 192.168.1.102 from 192.168.1.1
Jan 18 08:54:40 lynx dhclient: bound to 192.168.1.102 -- renewal in 746 seconds.
Jan 18 08:54:40 lynx NetworkManager: <info>  DHCP: device wlan0 state changed bound -> renew
Jan 18 08:54:40 lynx NetworkManager: <info>    address 192.168.1.102
Jan 18 08:54:40 lynx NetworkManager: <info>    prefix 24 (255.255.255.0)
Jan 18 08:54:40 lynx NetworkManager: <info>    gateway 192.168.1.1
Jan 18 08:54:40 lynx NetworkManager: <info>    nameserver '192.168.1.1'
Jan 18 08:54:40 lynx NetworkManager: <info>    domain name 'vc.shawcable.net'
Jan 18 09:01:58 lynx kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started.
Jan 18 09:01:59 lynx kernel: [    0.000000] Initializing cgroup subsys cpuset
Jan 18 09:01:59 lynx kernel: [    0.000000] Initializing cgroup subsys cpu
Jan 18 09:01:59 lynx kernel: [    0.000000] Linux version 2.6.32-10-generic (buildd@palmer) (gcc version 4.4.3 20100105 (prerelease) (Ubuntu 4.4.2-8ubuntu2) ) #14-Ubuntu SMP Thu Jan 7 17:38:40 UTC 2010 (Ubuntu 2.6.32-10.14-generic)
Jan 18 09:01:59 lynx kernel: [    0.000000] KERNEL supported cpus:
Jan 18 09:01:59 lynx kernel: [    0.000000]   Intel GenuineIntel
Jan 18 09:01:59 lynx kernel: [    0.000000]   AMD AuthenticAMD
Jan 18 09:01:59 lynx kernel: [    0.000000]   NSC Geode by NSC
Jan 18 09:01:59 lynx kernel: [    0.000000]   Cyrix CyrixInstead
Jan 18 09:01:59 lynx kernel: [    0.000000]   Centaur CentaurHauls
Jan 18 09:01:59 lynx kernel: [    0.000000]   Transmeta GenuineTMx86
Jan 18 09:01:59 lynx kernel: [    0.000000]   Transmeta TransmetaCPU
Jan 18 09:01:59 lynx kernel: [    0.000000]   UMC UMC UMC UMC
Jan 18 09:01:59 lynx kernel: [    0.000000] BIOS-provided physical RAM map:
Jan 18 09:01:59 lynx kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jan 18 09:01:59 lynx kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jan 18 09:01:59 lynx kernel: [    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jan 18 09:01:59 lynx kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000001e6f0000 (usable)
Jan 18 09:01:59 lynx kernel: [    0.000000]  BIOS-e820: 000000001e6f0000 - 000000001e6ff000 (ACPI data)
Jan 18 09:01:59 lynx kernel: [    0.000000]  BIOS-e820: 000000001e6ff000 - 000000001e700000 (ACPI NVS)
Jan 18 09:01:59 lynx kernel: [    0.000000]  BIOS-e820: 000000001e700000 - 000000001e800000 (reserved)
Jan 18 09:01:59 lynx kernel: [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Jan 18 09:01:59 lynx kernel: [    0.000000] DMI present.
Jan 18 09:01:59 lynx kernel: [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
Jan 18 09:01:59 lynx kernel: [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Jan 18 09:01:59 lynx kernel: [    0.000000] last_pfn = 0x1e6f0 max_arch_pfn = 0x100000
Jan 18 09:01:59 lynx kernel: [    0.000000] MTRR default type: write-back
Jan 18 09:01:59 lynx kernel: [    0.000000] MTRR fixed ranges enabled:
Jan 18 09:01:59 lynx kernel: [    0.000000]   00000-C7FFF write-back
Jan 18 09:01:59 lynx kernel: [    0.000000]   C8000-E3FFF uncachable
Jan 18 09:01:59 lynx kernel: [    0.000000]   E4000-FFFFF write-back
Jan 18 09:01:59 lynx kernel: [    0.000000] MTRR variable ranges enabled:
Jan 18 09:01:59 lynx kernel: [    0.000000]   0 disabled
Jan 18 09:01:59 lynx kernel: [    0.000000]   1 disabled
Jan 18 09:01:59 lynx kernel: [    0.000000]   2 disabled
Jan 18 09:01:59 lynx kernel: [    0.000000]   3 disabled
Jan 18 09:01:59 lynx kernel: [    0.000000]   4 disabled
Jan 18 09:01:59 lynx kernel: [    0.000000]   5 disabled
Jan 18 09:01:59 lynx kernel: [    0.000000]   6 disabled
Jan 18 09:01:59 lynx kernel: [    0.000000]   7 disabled
Jan 18 09:01:59 lynx kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jan 18 09:01:59 lynx kernel: [    0.000000] Scanning 0 areas for low memory corruption
Jan 18 09:01:59 lynx kernel: [    0.000000] modified physical RAM map:
Jan 18 09:01:59 lynx kernel: [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
Jan 18 09:01:59 lynx kernel: [    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
Jan 18 09:01:59 lynx kernel: [    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
Jan 18 09:01:59 lynx kernel: [    0.000000]  modified: 00000000000dc000 - 0000000000100000 (reserved)
Jan 18 09:01:59 lynx kernel: [    0.000000]  modified: 0000000000100000 - 000000001e6f0000 (usable)
Jan 18 09:01:59 lynx kernel: [    0.000000]  modified: 000000001e6f0000 - 000000001e6ff000 (ACPI data)
Jan 18 09:01:59 lynx kernel: [    0.000000]  modified: 000000001e6ff000 - 000000001e700000 (ACPI NVS)
Jan 18 09:01:59 lynx kernel: [    0.000000]  modified: 000000001e700000 - 000000001e800000 (reserved)
Jan 18 09:01:59 lynx kernel: [    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
Jan 18 09:01:59 lynx kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Jan 18 09:01:59 lynx kernel: [    0.000000] init_memory_mapping: 0000000000000000-000000001e6f0000
Jan 18 09:01:59 lynx kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Jan 18 09:01:59 lynx kernel: [    0.000000]  0000000000 - 0000400000 page 4k
Jan 18 09:01:59 lynx kernel: [    0.000000]  0000400000 - 001e400000 page 2M
Jan 18 09:01:59 lynx kernel: [    0.000000]  001e400000 - 001e6f0000 page 4k
Jan 18 09:01:59 lynx kernel: [    0.000000] kernel direct mapping tables up to 1e6f0000 @ 10000-15000
Jan 18 09:01:59 lynx kernel: [    0.000000] RAMDISK: 164ed000 - 16d73822
Jan 18 09:01:59 lynx kernel: [    0.000000] ACPI: RSDP 000f8170 00014 (v00 PTLTD )
Jan 18 09:01:59 lynx kernel: [    0.000000] ACPI: RSDT 1e6fae47 00030 (v01 PTLTD  RSDT     06040005  LTP 00000000)
Jan 18 09:01:59 lynx kernel: [    0.000000] ACPI: FACP 1e6fedd6 00074 (v01 PTLDT  RSDT     06040005 PTL  000F4240)
Jan 18 09:01:59 lynx kernel: [    0.000000] ACPI: DSDT 1e6fae77 03F5F (v01 PTLTD  DSDT     06040005 MSFT 0100000E)
Jan 18 09:01:59 lynx kernel: [    0.000000] ACPI: FACS 1e6fffc0 00040
Jan 18 09:01:59 lynx kernel: [    0.000000] ACPI: SSDT 1e6fee4a 000BC (v01 PTLTD  ACPICST1 06040005  LTP 00000001)
Jan 18 09:01:59 lynx kernel: [    0.000000] ACPI: SSDT 1e6fef06 000FA (v01 PTLTD  ACPIPST1 06040005  LTP 00000001)
Jan 18 09:01:59 lynx kernel: [    0.000000] 0MB HIGHMEM available.
Jan 18 09:01:59 lynx kernel: [    0.000000] 486MB LOWMEM available.
Jan 18 09:01:59 lynx kernel: [    0.000000]   mapped low ram: 0 - 1e6f0000
Jan 18 09:01:59 lynx kernel: [    0.000000]   low ram: 0 - 1e6f0000
Jan 18 09:01:59 lynx kernel: [    0.000000]   node 0 low ram: 00000000 - 1e6f0000
Jan 18 09:01:59 lynx kernel: [    0.000000]   node 0 bootmap 00011000 - 00014ce0
Jan 18 09:01:59 lynx kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001e6f0000]
Jan 18 09:01:59 lynx kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Jan 18 09:01:59 lynx kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Jan 18 09:01:59 lynx kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Jan 18 09:01:59 lynx kernel: [    0.000000]   #3 [0000100000 - 000092b018]    TEXT DATA BSS ==> [0000100000 - 000092b018]
Jan 18 09:01:59 lynx kernel: [    0.000000]   #4 [00164ed000 - 0016d73822]          RAMDISK ==> [00164ed000 - 0016d73822]
Jan 18 09:01:59 lynx kernel: [    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
Jan 18 09:01:59 lynx kernel: [    0.000000]   #6 [000092c000 - 000092f170]              BRK ==> [000092c000 - 000092f170]
Jan 18 09:01:59 lynx kernel: [    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
Jan 18 09:01:59 lynx kernel: [    0.000000]   #8 [0000011000 - 0000015000]          BOOTMAP ==> [0000011000 - 0000015000]
Jan 18 09:01:59 lynx kernel: [    0.000000] Zone PFN ranges:
Jan 18 09:01:59 lynx kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Jan 18 09:01:59 lynx kernel: [    0.000000]   Normal   0x00001000 -> 0x0001e6f0
Jan 18 09:01:59 lynx kernel: [    0.000000]   HighMem  0x0001e6f0 -> 0x0001e6f0
Jan 18 09:01:59 lynx kernel: [    0.000000] Movable zone start PFN for each node
Jan 18 09:01:59 lynx kernel: [    0.000000] early_node_map[2] active PFN ranges
Jan 18 09:01:59 lynx kernel: [    0.000000]     0: 0x00000010 -> 0x0000009f
Jan 18 09:01:59 lynx kernel: [    0.000000]     0: 0x00000100 -> 0x0001e6f0
Jan 18 09:01:59 lynx kernel: [    0.000000] On node 0 totalpages: 124543
Jan 18 09:01:59 lynx kernel: [    0.000000] free_area_init_node: node 0, pgdat c07e77c0, node_mem_map c1001200
Jan 18 09:01:59 lynx kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Jan 18 09:01:59 lynx kernel: [    0.000000]   DMA zone: 0 pages reserved
Jan 18 09:01:59 lynx kernel: [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
Jan 18 09:01:59 lynx kernel: [    0.000000]   Normal zone: 942 pages used for memmap
Jan 18 09:01:59 lynx kernel: [    0.000000]   Normal zone: 119618 pages, LIFO batch:31
Jan 18 09:01:59 lynx kernel: [    0.000000] Using APIC driver default
Jan 18 09:01:59 lynx kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x8008
Jan 18 09:01:59 lynx kernel: [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
Jan 18 09:01:59 lynx kernel: [    0.000000] No local APIC present or hardware disabled
Jan 18 09:01:59 lynx kernel: [    0.000000] APIC: disable apic facility
Jan 18 09:01:59 lynx kernel: [    0.000000] nr_irqs_gsi: 16
Jan 18 09:01:59 lynx kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jan 18 09:01:59 lynx kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
Jan 18 09:01:59 lynx kernel: [    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Jan 18 09:01:59 lynx kernel: [    0.000000] Allocating PCI resources starting at 1e800000 (gap: 1e800000:e1780000)
Jan 18 09:01:59 lynx kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Jan 18 09:01:59 lynx kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
Jan 18 09:01:59 lynx kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s35896 r0 d21448 u4194304
Jan 18 09:01:59 lynx kernel: [    0.000000] pcpu-alloc: s35896 r0 d21448 u4194304 alloc=1*4194304
Jan 18 09:01:59 lynx kernel: [    0.000000] pcpu-alloc: [0] 0 
Jan 18 09:01:59 lynx kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 123569
Jan 18 09:01:59 lynx kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-10-generic root=UUID=413ddaa2-ae4b-4f5f-b8a7-8546e8ff57b9 ro quiet splash
Jan 18 09:01:59 lynx kernel: [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Jan 18 09:01:59 lynx kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 18 09:01:59 lynx kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 18 09:01:59 lynx kernel: [    0.000000] Enabling fast FPU save and restore... done.
Jan 18 09:01:59 lynx kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Jan 18 09:01:59 lynx kernel: [    0.000000] Initializing CPU#0
Jan 18 09:01:59 lynx kernel: [    0.000000] allocated 2492800 bytes of page_cgroup
Jan 18 09:01:59 lynx kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jan 18 09:01:59 lynx kernel: [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
Jan 18 09:01:59 lynx kernel: [    0.000000] Memory: 473960k/498624k available (4859k kernel code, 23948k reserved, 2251k data, 660k init, 0k highmem)
Jan 18 09:01:59 lynx kernel: [    0.000000] virtual kernel memory layout:
Jan 18 09:01:59 lynx kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Jan 18 09:01:59 lynx kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Jan 18 09:01:59 lynx kernel: [    0.000000]     vmalloc : 0xdeef0000 - 0xff7fe000   ( 521 MB)
Jan 18 09:01:59 lynx kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xde6f0000   ( 486 MB)
Jan 18 09:01:59 lynx kernel: [    0.000000]       .init : 0xc07f2000 - 0xc0897000   ( 660 kB)
Jan 18 09:01:59 lynx kernel: [    0.000000]       .data : 0xc05bef0b - 0xc07f1be8   (2251 kB)
Jan 18 09:01:59 lynx kernel: [    0.000000]       .text : 0xc0100000 - 0xc05bef0b   (4859 kB)
Jan 18 09:01:59 lynx kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jan 18 09:01:59 lynx kernel: [    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan 18 09:01:59 lynx kernel: [    0.000000] Hierarchical RCU implementation.
Jan 18 09:01:59 lynx kernel: [    0.000000] NR_IRQS:2304 nr_irqs:256
Jan 18 09:01:59 lynx kernel: [    0.000000] spurious 8259A interrupt: IRQ7.
Jan 18 09:01:59 lynx kernel: [    0.000000] Console: colour VGA+ 80x25
Jan 18 09:01:59 lynx kernel: [    0.000000] console [tty0] enabled
Jan 18 09:01:59 lynx kernel: [    0.000000] Fast TSC calibration failed
Jan 18 09:01:59 lynx kernel: [    0.000000] TSC: PIT calibration matches PMTIMER. 2 loops
Jan 18 09:01:59 lynx kernel: [    0.000000] Detected 994.504 MHz processor.
Jan 18 09:01:59 lynx kernel: [    0.008051] Calibrating delay loop (skipped), value calculated using timer frequency.. 1989.00 BogoMIPS (lpj=3978016)
Jan 18 09:01:59 lynx kernel: [    0.009003] Security Framework initialized
Jan 18 09:01:59 lynx kernel: [    0.012438] AppArmor: AppArmor initialized
Jan 18 09:01:59 lynx kernel: [    0.013059] Mount-cache hash table entries: 512
Jan 18 09:01:59 lynx kernel: [    0.021570] Initializing cgroup subsys ns
Jan 18 09:01:59 lynx kernel: [    0.021616] Initializing cgroup subsys cpuacct
Jan 18 09:01:59 lynx kernel: [    0.022845] Initializing cgroup subsys memory
Jan 18 09:01:59 lynx kernel: [    0.022964] Initializing cgroup subsys devices
Jan 18 09:01:59 lynx kernel: [    0.022990] Initializing cgroup subsys freezer
Jan 18 09:01:59 lynx kernel: [    0.023012] Initializing cgroup subsys net_cls
Jan 18 09:01:59 lynx kernel: [    0.024136] CPU: L1 I Cache: 128K (64 bytes/line), D cache 64K (32 bytes/line)
Jan 18 09:01:59 lynx kernel: [    0.024380] CPU: L2 Cache: 1024K (128 bytes/line)
Jan 18 09:01:59 lynx kernel: [    0.024411] CPU: Processor revision 24C01189, 1000 MHz
Jan 18 09:01:59 lynx kernel: [    0.024429] CPU: Code Morphing Software revision 6.0.0-1-10074
Jan 18 09:01:59 lynx kernel: [    0.024448] CPU: 20031021 12:18 official release 6.0.0#12
Jan 18 09:01:59 lynx kernel: [    0.024493] mce: CPU supports 4 MCE banks
Jan 18 09:01:59 lynx kernel: [    0.024840] Performance Events: 
Jan 18 09:01:59 lynx kernel: [    0.025016] Checking 'hlt' instruction... OK.
Jan 18 09:01:59 lynx kernel: [    0.042736] SMP alternatives: switching to UP code
Jan 18 09:01:59 lynx kernel: [    0.064925] Freeing SMP alternatives: 20k freed
Jan 18 09:01:59 lynx kernel: [    0.068646] ACPI: Core revision 20090903
Jan 18 09:01:59 lynx kernel: [    0.131056] ACPI: setting ELCR to 0200 (from 0638)
Jan 18 09:01:59 lynx kernel: [    0.132571] ftrace: converting mcount calls to 0f 1f 44 00 00
Jan 18 09:01:59 lynx kernel: [    0.132648] ftrace: allocating 23089 entries in 46 pages
Jan 18 09:01:59 lynx kernel: [    0.148960] weird, boot CPU (#0) not listed by the BIOS.
Jan 18 09:01:59 lynx kernel: [    0.149169] SMP motherboard not detected.
Jan 18 09:01:59 lynx kernel: [    0.149218] Local APIC not detected. Using dummy APIC emulation.
Jan 18 09:01:59 lynx kernel: [    0.149451] SMP disabled
Jan 18 09:01:59 lynx kernel: [    0.155331] Brought up 1 CPUs
Jan 18 09:01:59 lynx kernel: [    0.155617] Total of 1 processors activated (1989.00 BogoMIPS).
Jan 18 09:01:59 lynx kernel: [    0.157538] CPU0 attaching NULL sched-domain.
Jan 18 09:01:59 lynx kernel: [    0.170578] devtmpfs: initialized
Jan 18 09:01:59 lynx kernel: [    0.196942] regulator: core version 0.5
Jan 18 09:01:59 lynx kernel: [    0.197830] Time: 17:01:22  Date: 01/18/10
Jan 18 09:01:59 lynx kernel: [    0.200457] NET: Registered protocol family 16
Jan 18 09:01:59 lynx kernel: [    0.206434] EISA bus registered
Jan 18 09:01:59 lynx kernel: [    0.206729] ACPI: bus type pci registered
Jan 18 09:01:59 lynx kernel: [    0.209984] PCI: PCI BIOS revision 2.10 entry at 0xfd8ac, last bus=2
Jan 18 09:01:59 lynx kernel: [    0.210016] PCI: Using configuration type 1 for base access
Jan 18 09:01:59 lynx kernel: [    0.228894] bio: create slab <bio-0> at 0
Jan 18 09:01:59 lynx kernel: [    0.239260] ACPI: EC: Look up EC in DSDT
Jan 18 09:01:59 lynx kernel: [    0.304414] ACPI: Interpreter enabled
Jan 18 09:01:59 lynx kernel: [    0.304517] ACPI: (supports S0 S3 S4 S5)
Jan 18 09:01:59 lynx kernel: [    0.305021] ACPI: Using PIC for interrupt routing
Jan 18 09:01:59 lynx kernel: [    0.357513] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
Jan 18 09:01:59 lynx kernel: [    0.359444] ACPI: No dock devices found.
Jan 18 09:01:59 lynx kernel: [    0.372181] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 18 09:01:59 lynx kernel: [    0.373581] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xec000000-0xefffffff]
Jan 18 09:01:59 lynx kernel: [    0.377608] pci 0000:00:03.1: quirk: region 8000-803f claimed by ali7101 ACPI
Jan 18 09:01:59 lynx kernel: [    0.378019] pci 0000:00:04.0: reg 10 io port: [0x1000-0x10ff]
Jan 18 09:01:59 lynx kernel: [    0.378073] pci 0000:00:04.0: reg 14 32bit mmio: [0xe8002000-0xe8002fff]
Jan 18 09:01:59 lynx kernel: [    0.378375] pci 0000:00:04.0: supports D1 D2
Jan 18 09:01:59 lynx kernel: [    0.378499] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold
Jan 18 09:01:59 lynx kernel: [    0.378621] pci 0000:00:04.0: PME# disabled
Jan 18 09:01:59 lynx kernel: [    0.378765] pci 0000:00:06.0: reg 10 32bit mmio: [0xe8000000-0xe8001fff]
Jan 18 09:01:59 lynx kernel: [    0.378890] pci 0000:00:06.0: supports D1 D2
Jan 18 09:01:59 lynx kernel: [    0.378903] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
Jan 18 09:01:59 lynx kernel: [    0.378926] pci 0000:00:06.0: PME# disabled
Jan 18 09:01:59 lynx kernel: [    0.379139] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
Jan 18 09:01:59 lynx kernel: [    0.379208] pci 0000:00:09.0: supports D1 D2
Jan 18 09:01:59 lynx kernel: [    0.379221] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
Jan 18 09:01:59 lynx kernel: [    0.379303] pci 0000:00:09.0: PME# disabled
Jan 18 09:01:59 lynx kernel: [    0.379988] pci 0000:00:0a.0: reg 10 io port: [0x1400-0x14ff]
Jan 18 09:01:59 lynx kernel: [    0.380150] pci 0000:00:0a.0: reg 14 32bit mmio: [0xe8005000-0xe80050ff]
Jan 18 09:01:59 lynx kernel: [    0.380469] pci 0000:00:0a.0: supports D1 D2
Jan 18 09:01:59 lynx kernel: [    0.380485] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold
Jan 18 09:01:59 lynx kernel: [    0.380509] pci 0000:00:0a.0: PME# disabled
Jan 18 09:01:59 lynx kernel: [    0.380826] pci 0000:00:0e.0: reg 10 io port: [0x1f0-0x1ff]
Jan 18 09:01:59 lynx kernel: [    0.380869] pci 0000:00:0e.0: reg 14 io port: [0x3f4-0x3f7]
Jan 18 09:01:59 lynx kernel: [    0.380907] pci 0000:00:0e.0: reg 18 io port: [0x170-0x17f]
Jan 18 09:01:59 lynx kernel: [    0.380943] pci 0000:00:0e.0: reg 1c io port: [0x374-0x377]
Jan 18 09:01:59 lynx kernel: [    0.381041] pci 0000:00:0e.0: reg 20 io port: [0x1800-0x180f]
Jan 18 09:01:59 lynx kernel: [    0.381201] pci 0000:00:0f.0: reg 10 32bit mmio: [0xe8003000-0xe8003fff]
Jan 18 09:01:59 lynx kernel: [    0.381311] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
Jan 18 09:01:59 lynx kernel: [    0.381333] pci 0000:00:0f.0: PME# disabled
Jan 18 09:01:59 lynx kernel: [    0.381553] pci 0000:00:0f.1: reg 10 32bit mmio: [0xe8004000-0xe8004fff]
Jan 18 09:01:59 lynx kernel: [    0.381762] pci 0000:00:0f.1: PME# supported from D0 D3hot D3cold
Jan 18 09:01:59 lynx kernel: [    0.381785] pci 0000:00:0f.1: PME# disabled
Jan 18 09:01:59 lynx kernel: [    0.382226] pci 0000:00:0f.3: reg 10 32bit mmio: [0xe8005400-0xe80054ff]
Jan 18 09:01:59 lynx kernel: [    0.382439] pci 0000:00:0f.3: PME# supported from D0 D3hot D3cold
Jan 18 09:01:59 lynx kernel: [    0.382493] pci 0000:00:0f.3: PME# disabled
Jan 18 09:01:59 lynx kernel: [    0.382936] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
Jan 18 09:01:59 lynx kernel: [    0.383103] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
Jan 18 09:01:59 lynx kernel: [    0.383137] pci 0000:01:00.0: reg 18 32bit mmio: [0xe8100000-0xe810ffff]
Jan 18 09:01:59 lynx kernel: [    0.383185] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
Jan 18 09:01:59 lynx kernel: [    0.383274] pci 0000:01:00.0: supports D1 D2
Jan 18 09:01:59 lynx kernel: [    0.383365] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
Jan 18 09:01:59 lynx kernel: [    0.383391] pci 0000:00:01.0: bridge 32bit mmio: [0xe8100000-0xe81fffff]
Jan 18 09:01:59 lynx kernel: [    0.383417] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
Jan 18 09:01:59 lynx kernel: [    0.384522] pci_bus 0000:00: on NUMA node 0
Jan 18 09:01:59 lynx kernel: [    0.384560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 18 09:01:59 lynx kernel: [    0.387001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Jan 18 09:01:59 lynx kernel: [    0.404658] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
Jan 18 09:01:59 lynx kernel: [    0.406599] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
Jan 18 09:01:59 lynx kernel: [    0.409329] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
Jan 18 09:01:59 lynx kernel: [    0.410748] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
Jan 18 09:01:59 lynx kernel: [    0.412178] ACPI: PCI Interrupt Link [LNKE] (IRQs *5)
Jan 18 09:01:59 lynx kernel: [    0.414026] ACPI: PCI Interrupt Link [LNKF] (IRQs *5)
Jan 18 09:01:59 lynx kernel: [    0.415882] ACPI: PCI Interrupt Link [LNKG] (IRQs *9)
Jan 18 09:01:59 lynx kernel: [    0.417688] ACPI: PCI Interrupt Link [LNKU] (IRQs 11) *0, disabled.
Jan 18 09:01:59 lynx kernel: [    0.420104] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Jan 18 09:01:59 lynx kernel: [    0.420205] vgaarb: loaded
Jan 18 09:01:59 lynx kernel: [    0.422248] SCSI subsystem initialized
Jan 18 09:01:59 lynx kernel: [    0.423733] libata version 3.00 loaded.
Jan 18 09:01:59 lynx kernel: [    0.426625] usbcore: registered new interface driver usbfs
Jan 18 09:01:59 lynx kernel: [    0.426772] usbcore: registered new interface driver hub
Jan 18 09:01:59 lynx kernel: [    0.427348] usbcore: registered new device driver usb
Jan 18 09:01:59 lynx kernel: [    0.430941] ACPI: WMI: Mapper loaded
Jan 18 09:01:59 lynx kernel: [    0.430957] PCI: Using ACPI for IRQ routing
Jan 18 09:01:59 lynx kernel: [    0.435177] Bluetooth: Core ver 2.15
Jan 18 09:01:59 lynx kernel: [    0.442946] NET: Registered protocol family 31
Jan 18 09:01:59 lynx kernel: [    0.442962] Bluetooth: HCI device and connection manager initialized
Jan 18 09:01:59 lynx kernel: [    0.442988] Bluetooth: HCI socket layer initialized
Jan 18 09:01:59 lynx kernel: [    0.443005] NetLabel: Initializing
Jan 18 09:01:59 lynx kernel: [    0.443013] NetLabel:  domain hash size = 128
Jan 18 09:01:59 lynx kernel: [    0.443020] NetLabel:  protocols = UNLABELED CIPSOv4
Jan 18 09:01:59 lynx kernel: [    0.445158] NetLabel:  unlabeled traffic allowed by default
Jan 18 09:01:59 lynx kernel: [    0.446277] Switching to clocksource tsc
Jan 18 09:01:59 lynx kernel: [    0.468185] AppArmor: AppArmor Filesystem Enabled
Jan 18 09:01:59 lynx kernel: [    0.468349] pnp: PnP ACPI init
Jan 18 09:01:59 lynx kernel: [    0.468428] ACPI: bus type pnp registered
Jan 18 09:01:59 lynx kernel: [    0.482542] pnp: PnP ACPI: found 8 devices
Jan 18 09:01:59 lynx kernel: [    0.482561] ACPI: ACPI bus type pnp unregistered
Jan 18 09:01:59 lynx kernel: [    0.482582] PnPBIOS: Disabled by ACPI PNP
Jan 18 09:01:59 lynx kernel: [    0.482790] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483389] system 00:07: ioport range 0x8000-0x807f could not be reserved
Jan 18 09:01:59 lynx kernel: [    0.483425] system 00:07: ioport range 0x8080-0x808d has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483453] system 00:07: ioport range 0xd000-0xd000 has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483476] system 00:07: ioport range 0xd004-0xd004 has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483498] system 00:07: ioport range 0xd002-0xd002 has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483519] system 00:07: ioport range 0xd006-0xd006 has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483542] system 00:07: ioport range 0x480-0x48f has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483567] system 00:07: ioport range 0x809-0x80f has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483590] system 00:07: ioport range 0xfe10-0xfe11 has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483617] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483642] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
Jan 18 09:01:59 lynx kernel: [    0.483666] system 00:07: iomem range 0xffe00000-0xffffffff could not be reserved
Jan 18 09:01:59 lynx kernel: [    0.522611] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Jan 18 09:01:59 lynx kernel: [    0.522638] pci 0000:00:01.0:   IO window: 0x2000-0x2fff
Jan 18 09:01:59 lynx kernel: [    0.522661] pci 0000:00:01.0:   MEM window: 0xe8100000-0xe81fffff
Jan 18 09:01:59 lynx kernel: [    0.522691] pci 0000:00:01.0:   PREFETCH window: 0xf0000000-0xf7ffffff
Jan 18 09:01:59 lynx kernel: [    0.522717] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
Jan 18 09:01:59 lynx kernel: [    0.522727] pci 0000:00:02.0:   IO window: disabled
Jan 18 09:01:59 lynx kernel: [    0.522747] pci 0000:00:02.0:   MEM window: disabled
Jan 18 09:01:59 lynx kernel: [    0.522764] pci 0000:00:02.0:   PREFETCH window: disabled
Jan 18 09:01:59 lynx kernel: [    0.522792] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:03
Jan 18 09:01:59 lynx kernel: [    0.522807] pci 0000:00:09.0:   IO window: 0x001c00-0x001cff
Jan 18 09:01:59 lynx kernel: [    0.522827] pci 0000:00:09.0:   IO window: 0x003000-0x0030ff
Jan 18 09:01:59 lynx kernel: [    0.522847] pci 0000:00:09.0:   PREFETCH window: 0x20000000-0x23ffffff
Jan 18 09:01:59 lynx kernel: [    0.522866] pci 0000:00:09.0:   MEM window: 0x24000000-0x27ffffff
Jan 18 09:01:59 lynx kernel: [    0.522953] pci 0000:00:01.0: setting latency timer to 64
Jan 18 09:01:59 lynx kernel: [    0.523648] pci 0000:00:02.0: setting latency timer to 64
Jan 18 09:01:59 lynx kernel: [    0.525980] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
Jan 18 09:01:59 lynx kernel: [    0.526003] PCI: setting IRQ 9 as level-triggered
Jan 18 09:01:59 lynx kernel: [    0.526028] pci 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
Jan 18 09:01:59 lynx kernel: [    0.526091] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Jan 18 09:01:59 lynx kernel: [    0.526209] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Jan 18 09:01:59 lynx kernel: [    0.526754] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
Jan 18 09:01:59 lynx kernel: [    0.526852] pci_bus 0000:01: resource 1 mem: [0xe8100000-0xe81fffff]
Jan 18 09:01:59 lynx kernel: [    0.526868] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
Jan 18 09:01:59 lynx kernel: [    0.526943] pci_bus 0000:03: resource 0 io:  [0x1c00-0x1cff]
Jan 18 09:01:59 lynx kernel: [    0.526956] pci_bus 0000:03: resource 1 io:  [0x3000-0x30ff]
Jan 18 09:01:59 lynx kernel: [    0.526969] pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff]
Jan 18 09:01:59 lynx kernel: [    0.526982] pci_bus 0000:03: resource 3 mem: [0x24000000-0x27ffffff]
Jan 18 09:01:59 lynx kernel: [    0.527907] NET: Registered protocol family 2
Jan 18 09:01:59 lynx kernel: [    0.530167] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 18 09:01:59 lynx kernel: [    0.534401] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Jan 18 09:01:59 lynx kernel: [    0.535452] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
Jan 18 09:01:59 lynx kernel: [    0.536126] TCP: Hash tables configured (established 16384 bind 16384)
Jan 18 09:01:59 lynx kernel: [    0.536146] TCP reno registered
Jan 18 09:01:59 lynx kernel: [    0.538426] NET: Registered protocol family 1
Jan 18 09:01:59 lynx kernel: [    0.972164] pci 0000:01:00.0: Boot video device
Jan 18 09:01:59 lynx kernel: [    0.974234] cpufreq-nforce2: No nForce2 chipset.
Jan 18 09:01:59 lynx kernel: [    0.974383] Scanning for low memory corruption every 60 seconds
Jan 18 09:01:59 lynx kernel: [    0.977271] audit: initializing netlink socket (disabled)
Jan 18 09:01:59 lynx kernel: [    0.977410] type=2000 audit(1263834082.975:1): initialized
Jan 18 09:01:59 lynx kernel: [    1.006093] Trying to unpack rootfs image as initramfs...
Jan 18 09:01:59 lynx kernel: [    1.034272] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Jan 18 09:01:59 lynx kernel: [    1.052507] VFS: Disk quotas dquot_6.5.2
Jan 18 09:01:59 lynx kernel: [    1.053236] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 18 09:01:59 lynx kernel: [    1.060885] fuse init (API version 7.13)
Jan 18 09:01:59 lynx kernel: [    1.061523] msgmni has been set to 926
Jan 18 09:01:59 lynx kernel: [    1.070507] alg: No test for stdrng (krng)
Jan 18 09:01:59 lynx kernel: [    1.070733] io scheduler noop registered
Jan 18 09:01:59 lynx kernel: [    1.070750] io scheduler anticipatory registered
Jan 18 09:01:59 lynx kernel: [    1.070764] io scheduler deadline registered
Jan 18 09:01:59 lynx kernel: [    1.070979] io scheduler cfq registered (default)
Jan 18 09:01:59 lynx kernel: [    1.072837] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 18 09:01:59 lynx kernel: [    1.073154] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan 18 09:01:59 lynx kernel: [    1.074466] ACPI: AC Adapter [AC] (on-line)
Jan 18 09:01:59 lynx kernel: [    1.076808] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Jan 18 09:01:59 lynx kernel: [    1.076988] ACPI: Power Button [PWRB]
Jan 18 09:01:59 lynx kernel: [    1.077368] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Jan 18 09:01:59 lynx kernel: [    1.084048] ACPI: Lid Switch [LID0]
Jan 18 09:01:59 lynx kernel: [    1.085206] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Jan 18 09:01:59 lynx kernel: [    1.085240] ACPI: Power Button [PWRF]
Jan 18 09:01:59 lynx kernel: [    1.087005] Marking TSC unstable due to TSC halts in idle
Jan 18 09:01:59 lynx kernel: [    1.093040] processor LNXCPU:00: registered as cooling_device0
Jan 18 09:01:59 lynx kernel: [    1.096114] Switching to clocksource acpi_pm
Jan 18 09:01:59 lynx kernel: [    1.115018] thermal LNXTHERM:01: registered as thermal_zone0
Jan 18 09:01:59 lynx kernel: [    1.115069] ACPI: Thermal Zone [THRM] (56 C)
Jan 18 09:01:59 lynx kernel: [    1.125656] ACPI: Battery Slot [BAT0] (battery present)
Jan 18 09:01:59 lynx kernel: [    1.126160] isapnp: Scanning for PnP cards...
Jan 18 09:01:59 lynx kernel: [    1.209781] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jan 18 09:01:59 lynx kernel: [    1.236082] brd: module loaded
Jan 18 09:01:59 lynx kernel: [    1.239996] loop: module loaded
Jan 18 09:01:59 lynx kernel: [    1.245882] input: Macintosh mouse button emulation as /devices/virtual/input/input3
Jan 18 09:01:59 lynx kernel: [    1.252671] pata_ali 0000:00:0e.0: can't derive routing for PCI INT A
Jan 18 09:01:59 lynx kernel: [    1.260399] scsi0 : pata_ali
Jan 18 09:01:59 lynx kernel: [    1.261244] scsi1 : pata_ali
Jan 18 09:01:59 lynx kernel: [    1.265071] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14
Jan 18 09:01:59 lynx kernel: [    1.265092] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15
Jan 18 09:01:59 lynx kernel: [    1.271834] Fixed MDIO Bus: probed
Jan 18 09:01:59 lynx kernel: [    1.272693] PPP generic driver version 2.4.2
Jan 18 09:01:59 lynx kernel: [    1.281505] tun: Universal TUN/TAP device driver, 1.6
Jan 18 09:02:00 lynx kernel: [    1.281520] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 18 09:02:00 lynx kernel: [    1.283202] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 18 09:02:00 lynx kernel: [    1.328774] ACPI: PCI Interrupt Link [LNKU] BIOS reported IRQ 0, using IRQ 11
Jan 18 09:02:00 lynx kernel: [    1.328793] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 11
Jan 18 09:02:00 lynx kernel: [    1.328810] PCI: setting IRQ 11 as level-triggered
Jan 18 09:02:00 lynx kernel: [    1.328832] ehci_hcd 0000:00:0f.3: PCI INT D -> Link[LNKU] -> GSI 11 (level, low) -> IRQ 11
Jan 18 09:02:00 lynx kernel: [    1.329128] ehci_hcd 0000:00:0f.3: EHCI Host Controller
Jan 18 09:02:00 lynx kernel: [    1.329613] ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 1
Jan 18 09:02:00 lynx kernel: [    1.330627] ehci_hcd 0000:00:0f.3: debug port 1
Jan 18 09:02:00 lynx kernel: [    1.330745] ehci_hcd 0000:00:0f.3: irq 11, io mem 0xe8005400
Jan 18 09:02:00 lynx kernel: [    1.340225] ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00
Jan 18 09:02:00 lynx kernel: [    1.342214] usb usb1: configuration #1 chosen from 1 choice
Jan 18 09:02:00 lynx kernel: [    1.342512] hub 1-0:1.0: USB hub found
Jan 18 09:02:00 lynx kernel: [    1.342637] hub 1-0:1.0: 6 ports detected
Jan 18 09:02:00 lynx kernel: [    1.343661] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 18 09:02:00 lynx kernel: [    1.349360] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
Jan 18 09:02:00 lynx kernel: [    1.349384] PCI: setting IRQ 5 as level-triggered
Jan 18 09:02:00 lynx kernel: [    1.349406] ohci_hcd 0000:00:0f.0: PCI INT A -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5
Jan 18 09:02:00 lynx kernel: [    1.349979] ohci_hcd 0000:00:0f.0: OHCI Host Controller
Jan 18 09:02:00 lynx kernel: [    1.350431] ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
Jan 18 09:02:00 lynx kernel: [    1.350586] ohci_hcd 0000:00:0f.0: irq 5, io mem 0xe8003000
Jan 18 09:02:00 lynx kernel: [    1.433451] usb usb2: configuration #1 chosen from 1 choice
Jan 18 09:02:00 lynx kernel: [    1.435731] hub 2-0:1.0: USB hub found
Jan 18 09:02:00 lynx kernel: [    1.435982] hub 2-0:1.0: 2 ports detected
Jan 18 09:02:00 lynx kernel: [    1.437692] ata1.00: ATA-5: HITACHI_DK14FA-20, 00MBA0A5, max UDMA/100
Jan 18 09:02:00 lynx kernel: [    1.437711] ata1.00: 39070080 sectors, multi 16: LBA 
Jan 18 09:02:00 lynx kernel: [    1.445835] ata1.00: configured for UDMA/100
Jan 18 09:02:00 lynx kernel: [    1.447827] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
Jan 18 09:02:00 lynx kernel: [    1.447860] ohci_hcd 0000:00:0f.1: PCI INT B -> Link[LNKF] -> GSI 5 (level, low) -> IRQ 5
Jan 18 09:02:00 lynx kernel: [    1.448095] ohci_hcd 0000:00:0f.1: OHCI Host Controller
Jan 18 09:02:00 lynx kernel: [    1.448593] ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
Jan 18 09:02:00 lynx kernel: [    1.448736] ohci_hcd 0000:00:0f.1: irq 5, io mem 0xe8004000
Jan 18 09:02:00 lynx kernel: [    1.531090] usb usb3: configuration #1 chosen from 1 choice
Jan 18 09:02:00 lynx kernel: [    1.531442] hub 3-0:1.0: USB hub found
Jan 18 09:02:00 lynx kernel: [    1.531551] hub 3-0:1.0: 2 ports detected
Jan 18 09:02:00 lynx kernel: [    1.531980] uhci_hcd: USB Universal Host Controller Interface driver
Jan 18 09:02:00 lynx kernel: [    1.537315] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Jan 18 09:02:00 lynx kernel: [    1.539128] serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 18 09:02:00 lynx kernel: [    1.539186] serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 18 09:02:00 lynx kernel: [    1.540804] mice: PS/2 mouse device common for all mice
Jan 18 09:02:00 lynx kernel: [    1.542225] Driver 'rtc_cmos' needs updating - please use bus_type methods
Jan 18 09:02:00 lynx kernel: [    1.548409] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Jan 18 09:02:00 lynx kernel: [    1.548537] rtc0: alarms up to one year, y3k, 242 bytes nvram
Jan 18 09:02:00 lynx kernel: [    1.548989] device-mapper: uevent: version 1.0.3
Jan 18 09:02:00 lynx kernel: [    1.551197] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Jan 18 09:02:00 lynx kernel: [    1.556457] device-mapper: multipath: version 1.1.0 loaded
Jan 18 09:02:00 lynx kernel: [    1.556482] device-mapper: multipath round-robin: version 1.0.0 loaded
Jan 18 09:02:00 lynx kernel: [    1.558115] EISA: Probing bus 0 at eisa.0
Jan 18 09:02:00 lynx kernel: [    1.558172] Cannot allocate resource for EISA slot 1
Jan 18 09:02:00 lynx kernel: [    1.558189] Cannot allocate resource for EISA slot 2
Jan 18 09:02:00 lynx kernel: [    1.558430] Cannot allocate resource for EISA slot 3
Jan 18 09:02:00 lynx kernel: [    1.558618] Cannot allocate resource for EISA slot 8
Jan 18 09:02:00 lynx kernel: [    1.558629] EISA: Detected 0 cards.
Jan 18 09:02:00 lynx kernel: [    1.561268] cpuidle: using governor ladder
Jan 18 09:02:00 lynx kernel: [    1.562145] cpuidle: using governor menu
Jan 18 09:02:00 lynx kernel: [    1.569608] TCP cubic registered
Jan 18 09:02:00 lynx kernel: [    1.570164] NET: Registered protocol family 10
Jan 18 09:02:00 lynx kernel: [    1.579459] lo: Disabled Privacy Extensions
Jan 18 09:02:00 lynx kernel: [    1.580855] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Jan 18 09:02:00 lynx kernel: [    1.586577] NET: Registered protocol family 17
Jan 18 09:02:00 lynx kernel: [    1.586775] Bluetooth: L2CAP ver 2.14
Jan 18 09:02:00 lynx kernel: [    1.586784] Bluetooth: L2CAP socket layer initialized
Jan 18 09:02:00 lynx kernel: [    1.586807] Bluetooth: SCO (Voice Link) ver 0.6
Jan 18 09:02:00 lynx kernel: [    1.586814] Bluetooth: SCO socket layer initialized
Jan 18 09:02:00 lynx kernel: [    1.588599] Bluetooth: RFCOMM TTY layer initialized
Jan 18 09:02:00 lynx kernel: [    1.588636] Bluetooth: RFCOMM socket layer initialized
Jan 18 09:02:00 lynx kernel: [    1.588646] Bluetooth: RFCOMM ver 1.11
Jan 18 09:02:00 lynx kernel: [    1.589247] Using IPI No-Shortcut mode
Jan 18 09:02:00 lynx kernel: [    1.589665] PM: Resume from disk failed.
Jan 18 09:02:00 lynx kernel: [    1.589777] registered taskstats version 1
Jan 18 09:02:00 lynx kernel: [    1.591537]   Magic number: 10:86:37
Jan 18 09:02:00 lynx kernel: [    1.592352] bdi 7:2: hash matches
Jan 18 09:02:00 lynx kernel: [    1.596606] rtc_cmos 00:02: setting system clock to 2010-01-18 17:01:23 UTC (1263834083)
Jan 18 09:02:00 lynx kernel: [    1.596632] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Jan 18 09:02:00 lynx kernel: [    1.596641] EDD information not available.
Jan 18 09:02:00 lynx kernel: [    1.920351] isapnp: No Plug & Play device found
Jan 18 09:02:00 lynx kernel: [    1.923404] scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK14FA-2 00MB PQ: 0 ANSI: 5
Jan 18 09:02:00 lynx kernel: [    1.928956] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 18 09:02:00 lynx kernel: [    1.931358] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
Jan 18 09:02:00 lynx kernel: [    1.932771] sd 0:0:0:0: [sda] Write Protect is off
Jan 18 09:02:00 lynx kernel: [    1.932796] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 18 09:02:00 lynx kernel: [    1.933806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 18 09:02:00 lynx kernel: [    1.945439]  sda: sda1 sda2 < sda5 >
Jan 18 09:02:00 lynx kernel: [    2.128679] sd 0:0:0:0: [sda] Attached SCSI disk
Jan 18 09:02:00 lynx kernel: [    2.274501] Freeing initrd memory: 8730k freed
Jan 18 09:02:00 lynx kernel: [    2.296475] Freeing unused kernel memory: 660k freed
Jan 18 09:02:00 lynx kernel: [    2.300315] Write protecting the kernel text: 4860k
Jan 18 09:02:00 lynx kernel: [    2.300474] Write protecting the kernel read-only data: 1936k
Jan 18 09:02:00 lynx kernel: [    2.833651] udev: starting version 149
Jan 18 09:02:00 lynx kernel: [    5.817134] Linux agpgart interface v0.103
Jan 18 09:02:00 lynx kernel: [    6.033451] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 18 09:02:00 lynx kernel: [    6.033617] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
Jan 18 09:02:00 lynx kernel: [    6.108402] agpgart: Detected Transmeta Efficeon TM8000 series chipset
Jan 18 09:02:00 lynx kernel: [    6.108464] agpgart-efficeon 0000:00:00.0: enabling device (0100 -> 0102)
Jan 18 09:02:00 lynx kernel: [    6.108530] agpgart: efficeon_create_gatt_table(16384)
Jan 18 09:02:00 lynx kernel: [    6.109180] agpgart: efficeon_configure()
Jan 18 09:02:00 lynx kernel: [    6.128206] agpgart-efficeon 0000:00:00.0: AGP aperture is 64M @ 0xec000000
Jan 18 09:02:00 lynx kernel: [    6.320245] 8139too Fast Ethernet driver 0.9.28
Jan 18 09:02:00 lynx kernel: [    6.321590] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
Jan 18 09:02:00 lynx kernel: [    6.321615] PCI: setting IRQ 3 as level-triggered
Jan 18 09:02:00 lynx kernel: [    6.321640] 8139too 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3
Jan 18 09:02:00 lynx kernel: [    6.426416] eth0: RealTek RTL8139 at 0x1400, 08:00:1f:1c:73:ed, IRQ 3
Jan 18 09:02:00 lynx kernel: [    7.077386] [drm] Initialized drm 1.1.0 20060810
Jan 18 09:02:00 lynx kernel: [    7.366059] [drm] radeon defaulting to kernel modesetting.
Jan 18 09:02:00 lynx kernel: [    7.366083] [drm] radeon kernel modesetting enabled.
Jan 18 09:02:00 lynx kernel: [    7.367234] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Jan 18 09:02:00 lynx kernel: [    7.367257] PCI: setting IRQ 10 as level-triggered
Jan 18 09:02:00 lynx kernel: [    7.367283] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
Jan 18 09:02:00 lynx kernel: [    7.376668] [drm] radeon: Initializing kernel modesetting.
Jan 18 09:02:00 lynx kernel: [    7.377028] [drm] register mmio base: 0xE8100000
Jan 18 09:02:00 lynx kernel: [    7.377041] [drm] register mmio size: 65536
Jan 18 09:02:00 lynx kernel: [    7.378007] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Jan 18 09:02:00 lynx kernel: [    7.378623] agpgart-efficeon 0000:00:00.0: AGP 2.0 bridge
Jan 18 09:02:00 lynx kernel: [    7.378724] agpgart-efficeon 0000:00:00.0: putting AGP V2 device into 2x mode
Jan 18 09:02:00 lynx kernel: [    7.378866] radeon 0000:01:00.0: putting AGP V2 device into 2x mode
Jan 18 09:02:00 lynx kernel: [    7.378897] [drm] radeon: VRAM 64M
Jan 18 09:02:00 lynx kernel: [    7.378907] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
Jan 18 09:02:00 lynx kernel: [    7.378917] [drm] radeon: GTT 64M
Jan 18 09:02:00 lynx kernel: [    7.378926] [drm] radeon: GTT from 0xEC000000 to 0xEFFFFFFF
Jan 18 09:02:00 lynx kernel: [    7.379262] [drm] radeon: irq initialized.
Jan 18 09:02:00 lynx kernel: [    7.380588] [drm] Detected VRAM RAM=64M, BAR=128M
Jan 18 09:02:00 lynx kernel: [    7.380603] [drm] RAM width 32bits DDR
Jan 18 09:02:00 lynx kernel: [    7.381297] [TTM] Zone  kernel: Available graphics memory: 241820 kiB.
Jan 18 09:02:00 lynx kernel: [    7.381519] [drm] radeon: 16M of VRAM memory ready
Jan 18 09:02:00 lynx kernel: [    7.381541] [drm] radeon: 64M of GTT memory ready.
Jan 18 09:02:00 lynx kernel: [    7.392068] [drm] radeon: cp idle (0x00008080)
Jan 18 09:02:00 lynx kernel: [    7.392288] [drm] Loading R100 Microcode
Jan 18 09:02:00 lynx kernel: [    7.393243] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
Jan 18 09:02:00 lynx kernel: [    7.554258] agpgart: efficeon_insert_memory(0, 256)
Jan 18 09:02:00 lynx kernel: [    7.554289] [TTM] AGP Bind memory failed.
Jan 18 09:02:00 lynx kernel: [    7.554298] [TTM] Couldn't bind backend.
Jan 18 09:02:00 lynx kernel: [    7.554325] [TTM] Failed moving buffer. Proposed placement 0x00070002
Jan 18 09:02:00 lynx kernel: [    7.559585] [drm:radeon_object_create] *ERROR* Failed to allocate TTM object (1048576, 0x00070002, 0)
Jan 18 09:02:00 lynx kernel: [    7.559619] [drm:radeon_ring_init] *ERROR* radeon: failed to create ring buffer (-22).
Jan 18 09:02:00 lynx kernel: [    7.559643] radeon 0000:01:00.0: failled initializing CP (-22).
Jan 18 09:02:00 lynx kernel: [    7.559656] radeon 0000:01:00.0: Disabling GPU acceleration
Jan 18 09:02:00 lynx kernel: [    7.562136] [drm] radeon: cp finalized
Jan 18 09:02:00 lynx kernel: [    7.562467] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Jan 18 09:02:00 lynx kernel: [    7.563491] [drm] radeon: cp finalized
Jan 18 09:02:00 lynx kernel: [    7.563514] [drm] radeon: fence finalized
Jan 18 09:02:00 lynx kernel: [    7.563910] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
Jan 18 09:02:00 lynx kernel: [    7.563937] [drm] radeon: ttm finalized
Jan 18 09:02:00 lynx kernel: [    7.563979] [drm] Forcing AGP to PCI mode
Jan 18 09:02:00 lynx kernel: [    7.565090] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Jan 18 09:02:00 lynx kernel: [    7.565166] [drm] radeon: VRAM 64M
Jan 18 09:02:00 lynx kernel: [    7.565175] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
Jan 18 09:02:00 lynx kernel: [    7.565184] [drm] radeon: GTT 64M
Jan 18 09:02:00 lynx kernel: [    7.565192] [drm] radeon: GTT from 0x04000000 to 0x07FFFFFF
Jan 18 09:02:00 lynx kernel: [    7.565320] [drm] radeon: irq initialized.
Jan 18 09:02:00 lynx kernel: [    7.565393] [drm] Detected VRAM RAM=64M, BAR=128M
Jan 18 09:02:00 lynx kernel: [    7.565403] [drm] RAM width 32bits DDR
Jan 18 09:02:00 lynx kernel: [    7.565705] [TTM] Zone  kernel: Available graphics memory: 241820 kiB.
Jan 18 09:02:00 lynx kernel: [    7.565906] [drm] radeon: 16M of VRAM memory ready
Jan 18 09:02:00 lynx kernel: [    7.565926] [drm] radeon: 64M of GTT memory ready.
Jan 18 09:02:00 lynx kernel: [    7.565948] [drm] GART: num cpu pages 16384, num gpu pages 16384
Jan 18 09:02:00 lynx kernel: [    7.577041] [drm] radeon: cp idle (0x00008080)
Jan 18 09:02:00 lynx kernel: [    7.579886] [drm] radeon: ring at 0x0000000004000000
Jan 18 09:02:00 lynx kernel: [    7.580655] [drm] ring test succeeded in 0 usecs
Jan 18 09:02:00 lynx kernel: [    7.581468] [drm] radeon: ib pool ready.
Jan 18 09:02:00 lynx kernel: [    7.581977] [drm] ib test succeeded in 0 usecs
Jan 18 09:02:00 lynx kernel: [    7.585069] [drm] Panel ID String: 1024x768                
Jan 18 09:02:00 lynx kernel: [    7.585087] [drm] Panel Size 1024x768
Jan 18 09:02:00 lynx kernel: [    7.585406] [drm] Radeon Display Connectors
Jan 18 09:02:00 lynx kernel: [    7.585417] [drm] Connector 0:
Jan 18 09:02:00 lynx kernel: [    7.585424] [drm]   VGA
Jan 18 09:02:00 lynx kernel: [    7.585435] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
Jan 18 09:02:00 lynx kernel: [    7.585444] [drm]   Encoders:
Jan 18 09:02:00 lynx kernel: [    7.585453] [drm]     CRT1: INTERNAL_DAC1
Jan 18 09:02:00 lynx kernel: [    7.585463] [drm] Connector 1:
Jan 18 09:02:00 lynx kernel: [    7.585470] [drm]   LVDS
Jan 18 09:02:00 lynx kernel: [    7.585475] [drm]   Encoders:
Jan 18 09:02:00 lynx kernel: [    7.585483] [drm]     LCD1: INTERNAL_LVDS
Jan 18 09:02:00 lynx kernel: [    7.638047] [drm] fb mappable at 0xF0040000
Jan 18 09:02:00 lynx kernel: [    7.638063] [drm] vram apper at 0xF0000000
Jan 18 09:02:00 lynx kernel: [    7.638072] [drm] size 3145728
Jan 18 09:02:00 lynx kernel: [    7.638080] [drm] fb depth is 24
Jan 18 09:02:00 lynx kernel: [    7.638091] [drm]    pitch is 4096
Jan 18 09:02:00 lynx kernel: [    7.640691] fb0: radeondrmfb frame buffer device
Jan 18 09:02:00 lynx kernel: [    7.640706] registered panic notifier
Jan 18 09:02:00 lynx kernel: [    7.640762] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
Jan 18 09:02:00 lynx kernel: [    7.653858] vga16fb: initializing
Jan 18 09:02:00 lynx kernel: [    7.653895] vga16fb: mapped to 0xc00a0000
Jan 18 09:02:00 lynx kernel: [    7.654680] fb1: VGA16 VGA frame buffer device
Jan 18 09:02:00 lynx kernel: [    7.830973] [drm] LVDS-11: set mode 1024x768 13
Jan 18 09:02:00 lynx kernel: [    7.925589] Console: switching to colour frame buffer device 128x48
Jan 18 09:02:01 lynx kernel: [   10.026906] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
Jan 18 09:02:01 lynx kernel: [   10.026977] EXT4-fs (sda1): write access will be enabled during recovery
Jan 18 09:02:01 lynx kernel: [   11.501772] EXT4-fs (sda1): orphan cleanup on readonly fs
Jan 18 09:02:01 lynx kernel: [   11.682244] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 394535
Jan 18 09:02:01 lynx kernel: [   11.714907] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 133939
Jan 18 09:02:01 lynx kernel: [   11.744197] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137742
Jan 18 09:02:01 lynx kernel: [   11.748619] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137740
Jan 18 09:02:01 lynx kernel: [   11.751944] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137739
Jan 18 09:02:01 lynx kernel: [   11.752915] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137738
Jan 18 09:02:01 lynx kernel: [   11.753413] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137737
Jan 18 09:02:01 lynx kernel: [   11.754904] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137736
Jan 18 09:02:01 lynx kernel: [   11.755398] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137735
Jan 18 09:02:01 lynx kernel: [   11.755822] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137734
Jan 18 09:02:01 lynx kernel: [   11.756440] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137733
Jan 18 09:02:01 lynx kernel: [   11.757026] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137732
Jan 18 09:02:01 lynx kernel: [   11.757976] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137731
Jan 18 09:02:01 lynx kernel: [   11.759594] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137730
Jan 18 09:02:01 lynx kernel: [   11.760876] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137729
Jan 18 09:02:01 lynx kernel: [   11.761259] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137720
Jan 18 09:02:01 lynx kernel: [   11.802881] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 271763
Jan 18 09:02:01 lynx kernel: [   11.829092] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 131844
Jan 18 09:02:01 lynx kernel: [   11.850962] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 304044
Jan 18 09:02:01 lynx kernel: [   11.866406] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 304038
Jan 18 09:02:01 lynx kernel: [   11.868147] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 304036
Jan 18 09:02:01 lynx kernel: [   11.869406] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 304034
Jan 18 09:02:01 lynx kernel: [   11.888132] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 303320
Jan 18 09:02:01 lynx kernel: [   11.893211] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 303038
Jan 18 09:02:01 lynx kernel: [   11.896715] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 303018
Jan 18 09:02:01 lynx kernel: [   11.910663] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 303016
Jan 18 09:02:01 lynx kernel: [   11.911692] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 303003
Jan 18 09:02:01 lynx kernel: [   11.914504] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 131749
Jan 18 09:02:01 lynx kernel: [   11.955803] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 787108
Jan 18 09:02:01 lynx kernel: [   11.997065] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 140807
Jan 18 09:02:01 lynx kernel: [   12.022135] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 134430
Jan 18 09:02:01 lynx kernel: [   12.039851] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654092
Jan 18 09:02:01 lynx kernel: [   12.061330] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 134329
Jan 18 09:02:01 lynx kernel: [   12.061556] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 134064
Jan 18 09:02:01 lynx kernel: [   12.062000] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137792
Jan 18 09:02:01 lynx kernel: [   12.093323] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 138105
Jan 18 09:02:01 lynx kernel: [   12.106863] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 133789
Jan 18 09:02:01 lynx kernel: [   12.107058] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 133791
Jan 18 09:02:01 lynx kernel: [   12.107212] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 134472
Jan 18 09:02:01 lynx kernel: [   12.108632] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 131681
Jan 18 09:02:01 lynx kernel: [   12.136317] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 265663
Jan 18 09:02:01 lynx kernel: [   12.136543] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 265662
Jan 18 09:02:01 lynx kernel: [   12.136677] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 265661
Jan 18 09:02:01 lynx kernel: [   12.137892] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 265660
Jan 18 09:02:01 lynx kernel: [   12.138038] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 265653
Jan 18 09:02:01 lynx kernel: [   12.138149] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 265651
Jan 18 09:02:01 lynx kernel: [   12.188626] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 131117
Jan 18 09:02:01 lynx kernel: [   12.189170] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 265641
Jan 18 09:02:01 lynx kernel: [   12.189458] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 265620
Jan 18 09:02:01 lynx kernel: [   12.189727] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 265629
Jan 18 09:02:01 lynx kernel: [   12.189843] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 265624
Jan 18 09:02:01 lynx kernel: [   12.189906] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 131664
Jan 18 09:02:01 lynx kernel: [   12.227863] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 297538
Jan 18 09:02:01 lynx kernel: [   12.228938] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 297536
Jan 18 09:02:01 lynx kernel: [   12.229214] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 297534
Jan 18 09:02:01 lynx kernel: [   12.229295] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 297529
Jan 18 09:02:01 lynx kernel: [   12.229581] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 297521
Jan 18 09:02:01 lynx kernel: [   12.237758] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 295320
Jan 18 09:02:01 lynx kernel: [   12.250460] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 295242
Jan 18 09:02:01 lynx kernel: [   12.250597] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 295240
Jan 18 09:02:01 lynx kernel: [   12.265264] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 289672
Jan 18 09:02:01 lynx kernel: [   12.279156] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 289647
Jan 18 09:02:01 lynx kernel: [   12.279283] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 289626
Jan 18 09:02:01 lynx kernel: [   12.279394] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 289620
Jan 18 09:02:01 lynx kernel: [   12.279494] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 289616
Jan 18 09:02:01 lynx kernel: [   12.279607] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 289609
Jan 18 09:02:01 lynx kernel: [   12.305502] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285071
Jan 18 09:02:01 lynx kernel: [   12.305705] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285067
Jan 18 09:02:01 lynx kernel: [   12.305844] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 131662
Jan 18 09:02:01 lynx kernel: [   12.305964] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 133689
Jan 18 09:02:01 lynx kernel: [   12.306071] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 133669
Jan 18 09:02:01 lynx kernel: [   12.306207] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 130941
Jan 18 09:02:01 lynx kernel: [   12.306328] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 130933
Jan 18 09:02:01 lynx kernel: [   12.306426] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 131948
Jan 18 09:02:01 lynx kernel: [   12.306538] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 133661
Jan 18 09:02:01 lynx kernel: [   12.306649] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 134568
Jan 18 09:02:01 lynx kernel: [   12.306895] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654307
Jan 18 09:02:01 lynx kernel: [   12.307029] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 132245
Jan 18 09:02:01 lynx kernel: [   12.307149] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 132244
Jan 18 09:02:01 lynx kernel: [   12.335232] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658647
Jan 18 09:02:01 lynx kernel: [   12.335404] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658643
Jan 18 09:02:01 lynx kernel: [   12.336611] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658641
Jan 18 09:02:01 lynx kernel: [   12.336746] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658639
Jan 18 09:02:01 lynx kernel: [   12.336897] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658634
Jan 18 09:02:01 lynx kernel: [   12.336996] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658630
Jan 18 09:02:01 lynx kernel: [   12.337099] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658628
Jan 18 09:02:01 lynx kernel: [   12.337207] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658626
Jan 18 09:02:01 lynx kernel: [   12.337312] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658624
Jan 18 09:02:01 lynx kernel: [   12.337430] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658621
Jan 18 09:02:01 lynx kernel: [   12.337551] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658619
Jan 18 09:02:01 lynx kernel: [   12.337650] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658617
Jan 18 09:02:01 lynx kernel: [   12.337907] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658613
Jan 18 09:02:01 lynx kernel: [   12.365492] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 137213
Jan 18 09:02:01 lynx kernel: [   12.365679] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654257
Jan 18 09:02:01 lynx kernel: [   12.366639] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 789189
Jan 18 09:02:01 lynx kernel: [   12.388273] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 787404
Jan 18 09:02:01 lynx kernel: [   12.410777] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 787412
Jan 18 09:02:01 lynx kernel: [   12.411125] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 787423
Jan 18 09:02:01 lynx kernel: [   12.411489] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 787410
Jan 18 09:02:01 lynx kernel: [   12.436617] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 787408
Jan 18 09:02:01 lynx kernel: [   12.444872] EXT4-fs (sda1): 100 orphan inodes deleted
Jan 18 09:02:01 lynx kernel: [   12.444908] EXT4-fs (sda1): recovery complete
Jan 18 09:02:01 lynx kernel: [   12.718096] EXT4-fs (sda1): mounted filesystem with ordered data mode
Jan 18 09:02:01 lynx kernel: [   21.353508] Adding 859436k swap on /dev/sda5.  Priority:-1 extents:1 across:859436k 
Jan 18 09:02:01 lynx kernel: [   22.096922] udev: starting version 149
Jan 18 09:02:01 lynx kernel: [   25.086502] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 18 09:02:01 lynx kernel: [   25.504406] ali1563_smbus 0000:00:03.0: Could not allocate I/O space at 0x8080
Jan 18 09:02:01 lynx kernel: [   25.504468] ali1563_smbus 0000:00:03.0: ALi1563 SMBus probe failed (-19)
Jan 18 09:02:01 lynx kernel: [   25.508924] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
Jan 18 09:02:01 lynx kernel: [   25.508945] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
Jan 18 09:02:01 lynx kernel: [   26.268520] cfg80211: Calling CRDA to update world regulatory domain
Jan 18 09:02:01 lynx kernel: [   26.276655] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
Jan 18 09:02:01 lynx kernel: [   26.276805] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
Jan 18 09:02:01 lynx kernel: [   26.568313] yenta_cardbus 0000:00:09.0: CardBus bridge found [13bd:103b]
Jan 18 09:02:01 lynx kernel: [   26.752877] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0090, PCI irq 9
Jan 18 09:02:01 lynx kernel: [   26.752901] yenta_cardbus 0000:00:09.0: Socket status: 30000006
Jan 18 09:02:01 lynx kernel: [   27.160138] lp: driver loaded but no devices found
Jan 18 09:02:01 lynx kernel: [   28.114754] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa24cb1, caps: 0x804713/0x0
Jan 18 09:02:01 lynx kernel: [   28.278110] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
Jan 18 09:02:01 lynx kernel: [   28.473151] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
Jan 18 09:02:01 lynx kernel: [   28.473184] PCI: setting IRQ 4 as level-triggered
Jan 18 09:02:01 lynx kernel: [   28.473215] p54pci 0000:00:06.0: PCI INT A -> Link[LNKD] -> GSI 4 (level, low) -> IRQ 4
Jan 18 09:02:01 lynx kernel: [   28.473683] p54pci 0000:00:06.0: firmware: requesting isl3886pci
Jan 18 09:02:01 lynx kernel: [   29.347592] cfg80211: World regulatory domain updated:
Jan 18 09:02:01 lynx kernel: [   29.347626] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 18 09:02:01 lynx kernel: [   29.347643] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 18 09:02:01 lynx kernel: [   29.347656] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 18 09:02:01 lynx kernel: [   29.347669] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 18 09:02:01 lynx kernel: [   29.347681] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 18 09:02:01 lynx kernel: [   29.347693] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 18 09:02:01 lynx kernel: [   29.590139] p54pci 0000:00:06.0: Cannot find firmware (isl3886pci)
Jan 18 09:02:01 lynx kernel: [   29.590197] p54pci 0000:00:06.0: firmware: requesting isl3886
Jan 18 09:02:01 lynx kernel: [   29.750691] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
Jan 18 09:02:01 lynx kernel: [   29.833179] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
Jan 18 09:02:01 lynx NetworkManager: <info>  starting...
Jan 18 09:02:01 lynx kernel: [   29.835243] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
Jan 18 09:02:01 lynx kernel: [   29.866717] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
Jan 18 09:02:01 lynx kernel: [   29.937090] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Jan 18 09:02:01 lynx kernel: [   30.223743] p54pci 0000:00:06.0: PCI INT A disabled
Jan 18 09:02:01 lynx kernel: [   30.223819] p54pci: probe of 0000:00:06.0 failed with error -2
Jan 18 09:02:01 lynx kernel: [   31.883263] type=1505 audit(1263834113.783:2):  operation="profile_load" pid=817 name="/sbin/dhclient3"
Jan 18 09:02:01 lynx kernel: [   31.904369] type=1505 audit(1263834113.807:3):  operation="profile_load" pid=817 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Jan 18 09:02:02 lynx kernel: [   31.905518] type=1505 audit(1263834113.807:4):  operation="profile_load" pid=817 name="/usr/lib/connman/scripts/dhclient-script"
Jan 18 09:02:02 lynx kernel: [   34.023461] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
Jan 18 09:02:02 lynx kernel: [   34.023516] Intel ICH 0000:00:04.0: PCI INT A -> Link[LNKG] -> GSI 9 (level, low) -> IRQ 9
Jan 18 09:02:02 lynx kernel: [   34.168277] intel8x0_measure_ac97_clock: measured 54630 usecs (2632 samples)
Jan 18 09:02:02 lynx kernel: [   34.168299] intel8x0: clocking to 48000
Jan 18 09:02:02 lynx NetworkManager: <info>  Trying to start the modem-manager...
Jan 18 09:02:03 lynx NetworkManager:    SCPlugin-Ifupdown: init!
Jan 18 09:02:03 lynx NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Jan 18 09:02:03 lynx NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Jan 18 09:02:03 lynx NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:0a.0/net/eth0, iface: eth0)
Jan 18 09:02:03 lynx NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:0a.0/net/eth0, iface: eth0): no ifupdown configuration found.
Jan 18 09:02:03 lynx NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Jan 18 09:02:03 lynx NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Jan 18 09:02:03 lynx NetworkManager:    SCPlugin-Ifupdown: end _init.
Jan 18 09:02:03 lynx NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Jan 18 09:02:03 lynx NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Jan 18 09:02:03 lynx NetworkManager: <info>  Wireless now enabled by radio killswitch
Jan 18 09:02:03 lynx NetworkManager:    SCPlugin-Ifupdown: (135136864) ... get_connections.
Jan 18 09:02:03 lynx NetworkManager:    SCPlugin-Ifupdown: (135136864) ... get_connections (managed=false): return empty list.
Jan 18 09:02:03 lynx NetworkManager:    Ifupdown: get unmanaged devices count: 0
Jan 18 09:02:03 lynx NetworkManager: <info>  (eth0): carrier is OFF
Jan 18 09:02:03 lynx NetworkManager: <info>  (eth0): new Ethernet device (driver: '8139too')
Jan 18 09:02:03 lynx modem-manager: Loaded plugin Nokia
Jan 18 09:02:03 lynx NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Jan 18 09:02:03 lynx NetworkManager: <info>  (eth0): now managed
Jan 18 09:02:03 lynx NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Jan 18 09:02:03 lynx NetworkManager: <info>  (eth0): bringing up device.
Jan 18 09:02:03 lynx modem-manager: Loaded plugin Option
Jan 18 09:02:03 lynx kernel: [   42.042576] eth0: link down
Jan 18 09:02:03 lynx kernel: [   42.053339] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 18 09:02:03 lynx NetworkManager: <info>  (eth0): preparing device.
Jan 18 09:02:03 lynx NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Jan 18 09:02:03 lynx modem-manager: Loaded plugin Generic
Jan 18 09:02:04 lynx modem-manager: Loaded plugin Novatel
Jan 18 09:02:04 lynx modem-manager: Loaded plugin Huawei
Jan 18 09:02:04 lynx NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:0a.0/net/eth0
Jan 18 09:02:04 lynx modem-manager: Loaded plugin Ericsson MBM
Jan 18 09:02:04 lynx modem-manager: Loaded plugin Option High-Speed
Jan 18 09:02:04 lynx modem-manager: Loaded plugin ZTE
Jan 18 09:02:04 lynx modem-manager: Loaded plugin MotoC
Jan 18 09:02:04 lynx modem-manager: Loaded plugin Gobi
Jan 18 09:02:04 lynx modem-manager: Loaded plugin Sierra
Jan 18 09:02:04 lynx NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Jan 18 09:02:04 lynx NetworkManager: <info>  modem-manager is now available
Jan 18 09:02:04 lynx NetworkManager: <info>  Trying to start the supplicant...
Jan 18 09:02:05 lynx kernel: [   43.836712] type=1505 audit(1263834125.739:5):  operation="profile_load" pid=1026 name="/usr/share/gdm/guest-session/Xsession"
Jan 18 09:02:05 lynx kernel: [   43.952892] type=1505 audit(1263834125.855:6):  operation="profile_replace" pid=1027 name="/sbin/dhclient3"
Jan 18 09:02:05 lynx kernel: [   43.954227] type=1505 audit(1263834125.855:7):  operation="profile_replace" pid=1027 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Jan 18 09:02:05 lynx kernel: [   43.955127] type=1505 audit(1263834125.855:8):  operation="profile_replace" pid=1027 name="/usr/lib/connman/scripts/dhclient-script"
Jan 18 09:02:06 lynx kernel: [   44.159271] type=1505 audit(1263834126.059:9):  operation="profile_load" pid=1028 name="/usr/bin/evince"
Jan 18 09:02:06 lynx kernel: [   44.178335] type=1505 audit(1263834126.079:10):  operation="profile_load" pid=1028 name="/usr/bin/evince-previewer"
Jan 18 09:02:06 lynx kernel: [   44.187892] type=1505 audit(1263834126.087:11):  operation="profile_load" pid=1028 name="/usr/bin/evince-thumbnailer"
Jan 18 09:02:06 lynx kernel: [   44.437839] type=1505 audit(1263834126.339:12):  operation="profile_load" pid=1031 name="/usr/lib/cups/backend/cups-pdf"
Jan 18 09:02:06 lynx kernel: [   44.443599] type=1505 audit(1263834126.343:13):  operation="profile_load" pid=1031 name="/usr/sbin/cupsd"
Jan 18 09:02:06 lynx kernel: [   44.585953] type=1505 audit(1263834126.487:14):  operation="profile_load" pid=1032 name="/usr/sbin/tcpdump"
Jan 18 09:02:14 lynx kernel: [   53.033986] ppdev: user-space parallel port driver
Jan 18 09:07:36 lynx kernel: [  374.230236] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
Jan 18 09:07:36 lynx kernel: [  374.238249] pci 0000:03:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
Jan 18 09:07:36 lynx kernel: [  374.871869] ath5k 0000:03:00.0: enabling device (0000 -> 0002)
Jan 18 09:07:37 lynx kernel: [  374.892200] ath5k 0000:03:00.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
Jan 18 09:07:37 lynx kernel: [  374.893641] ath5k 0000:03:00.0: registered as 'phy1'
Jan 18 09:07:37 lynx kernel: [  375.598016] ath: EEPROM regdomain: 0x10
Jan 18 09:07:37 lynx kernel: [  375.598094] ath: EEPROM indicates we should expect a direct regpair map
Jan 18 09:07:37 lynx kernel: [  375.598165] ath: Country alpha2 being used: CO
Jan 18 09:07:37 lynx kernel: [  375.598201] ath: Regpair used: 0x10
Jan 18 09:07:37 lynx kernel: [  376.080884] phy1: Selected rate control algorithm 'minstrel'
Jan 18 09:07:38 lynx kernel: [  376.112362] ath5k phy1: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
Jan 18 09:07:38 lynx kernel: [  376.112508] cfg80211: Calling CRDA for country: CO
Jan 18 09:07:38 lynx NetworkManager: <info>  Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:09.0/0000:03:00.0/ieee80211/phy1/rfkill0) (driver <unknown>)
Jan 18 09:07:38 lynx kernel: [  376.598329] cfg80211: Regulatory domain changed to country: CO
Jan 18 09:07:38 lynx kernel: [  376.598411] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 18 09:07:38 lynx kernel: [  376.598466] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 18 09:07:38 lynx kernel: [  376.598505] 	(5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
Jan 18 09:07:38 lynx kernel: [  376.598574] 	(5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
Jan 18 09:07:38 lynx kernel: [  376.598730] 	(5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
Jan 18 09:07:38 lynx NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 18 09:07:38 lynx NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Jan 18 09:07:38 lynx NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Jan 18 09:07:38 lynx NetworkManager: <info>  (wlan0): now managed
Jan 18 09:07:38 lynx NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Jan 18 09:07:38 lynx NetworkManager: <info>  (wlan0): bringing up device.
Jan 18 09:07:39 lynx kernel: [  377.586031] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 18 09:07:39 lynx NetworkManager: <info>  (wlan0): preparing device.
Jan 18 09:07:39 lynx NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Jan 18 09:07:39 lynx NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:09.0/0000:03:00.0/net/wlan0, iface: wlan0)
Jan 18 09:07:39 lynx NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:09.0/0000:03:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Jan 18 09:07:40 lynx NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
Jan 18 09:07:40 lynx NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 42)
Jan 18 09:07:42 lynx NetworkManager: <info>  Activation (wlan0) starting connection 'Auto Waves Wireless - Framework N1'
Jan 18 09:07:42 lynx NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
Jan 18 09:07:42 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 18 09:07:42 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 18 09:07:42 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 18 09:07:42 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 18 09:07:42 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 18 09:07:42 lynx NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Jan 18 09:07:42 lynx NetworkManager: <info>  Activation (wlan0/wireless): access point 'Auto Waves Wireless - Framework N1' has security, but secrets are required.
Jan 18 09:07:42 lynx NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
Jan 18 09:07:42 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 18 09:07:43 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 18 09:07:43 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 18 09:07:43 lynx NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
Jan 18 09:07:43 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 18 09:07:43 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 18 09:07:43 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 18 09:07:43 lynx NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Jan 18 09:07:43 lynx NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto Waves Wireless - Framework N1' has security, and secrets exist.  No new secrets needed.
Jan 18 09:07:43 lynx NetworkManager: <info>  Config: added 'ssid' value 'Waves Wireless - Framework N1'
Jan 18 09:07:43 lynx NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Jan 18 09:07:43 lynx NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Jan 18 09:07:43 lynx NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Jan 18 09:07:43 lynx NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Jan 18 09:07:43 lynx NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Jan 18 09:07:43 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 18 09:07:43 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> disconnected
Jan 18 09:07:43 lynx NetworkManager: <info>  Config: set interface ap_scan to 1
Jan 18 09:07:46 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
Jan 18 09:07:48 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> associating
Jan 18 09:07:48 lynx kernel: [  386.639047] wlan0: direct probe to AP 00:1d:6a:bf:3c:b1 (try 1)
Jan 18 09:07:48 lynx kernel: [  386.639592] wlan0: deauthenticating from 00:1d:6a:bf:3c:b1 by local choice (reason=3)
Jan 18 09:07:48 lynx kernel: [  386.643697] wlan0: direct probe to AP 00:1d:6a:bf:3c:b1 (try 1)
Jan 18 09:07:48 lynx kernel: [  386.646626] wlan0: direct probe responded
Jan 18 09:07:48 lynx kernel: [  386.646710] wlan0: authenticate with AP 00:1d:6a:bf:3c:b1 (try 1)
Jan 18 09:07:48 lynx kernel: [  386.649774] wlan0: authenticated
Jan 18 09:07:48 lynx kernel: [  386.650261] wlan0: associate with AP 00:1d:6a:bf:3c:b1 (try 1)
Jan 18 09:07:48 lynx kernel: [  386.654211] wlan0: RX AssocResp from 00:1d:6a:bf:3c:b1 (capab=0x31 status=0 aid=5)
Jan 18 09:07:48 lynx kernel: [  386.654281] wlan0: associated
Jan 18 09:07:48 lynx kernel: [  386.662425] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 18 09:07:49 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  associating -> associated
Jan 18 09:07:49 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  associated -> 4-way handshake
Jan 18 09:07:49 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  4-way handshake -> group handshake
Jan 18 09:07:49 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
Jan 18 09:07:49 lynx NetworkManager: <info>  Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Waves Wireless - Framework N1'.
Jan 18 09:07:49 lynx NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 18 09:07:49 lynx NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 18 09:07:49 lynx NetworkManager: <info>  (wlan0): device state change: 5 -> 7 (reason 0)
Jan 18 09:07:49 lynx NetworkManager: <info>  Activation (wlan0) Beginning DHCP transaction (timeout in 45 seconds)
Jan 18 09:07:49 lynx NetworkManager: <info>  dhclient started with pid 1669
Jan 18 09:07:49 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) scheduled...
Jan 18 09:07:49 lynx NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 18 09:07:49 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) started...
Jan 18 09:07:49 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) complete.
Jan 18 09:07:49 lynx dhclient: Internet Systems Consortium DHCP Client V3.1.3
Jan 18 09:07:49 lynx dhclient: Copyright 2004-2009 Internet Systems Consortium.
Jan 18 09:07:49 lynx dhclient: All rights reserved.
Jan 18 09:07:49 lynx dhclient: For info, please visit https://www.isc.org/software/dhcp/
Jan 18 09:07:49 lynx dhclient: 
Jan 18 09:07:50 lynx NetworkManager: <info>  DHCP: device wlan0 state changed (null) -> preinit
Jan 18 09:07:50 lynx dhclient: Listening on LPF/wlan0/00:19:5b:44:60:94
Jan 18 09:07:50 lynx dhclient: Sending on   LPF/wlan0/00:19:5b:44:60:94
Jan 18 09:07:50 lynx dhclient: Sending on   Socket/fallback
Jan 18 09:07:50 lynx dhclient: DHCPREQUEST of 192.168.1.102 on wlan0 to 255.255.255.255 port 67
Jan 18 09:07:50 lynx dhclient: DHCPACK of 192.168.1.102 from 192.168.1.1
Jan 18 09:07:51 lynx NetworkManager: <info>  DHCP: device wlan0 state changed preinit -> reboot
Jan 18 09:07:51 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 18 09:07:51 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 18 09:07:51 lynx NetworkManager: <info>    address 192.168.1.102
Jan 18 09:07:51 lynx dhclient: bound to 192.168.1.102 -- renewal in 762 seconds.
Jan 18 09:07:51 lynx NetworkManager: <info>    prefix 24 (255.255.255.0)
Jan 18 09:07:51 lynx NetworkManager: <info>    gateway 192.168.1.1
Jan 18 09:07:51 lynx NetworkManager: <info>    nameserver '192.168.1.1'
Jan 18 09:07:51 lynx NetworkManager: <info>    domain name 'vc.shawcable.net'
Jan 18 09:07:51 lynx NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 18 09:07:51 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 18 09:07:51 lynx NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 18 09:07:53 lynx NetworkManager: <info>  (wlan0): device state change: 7 -> 8 (reason 0)
Jan 18 09:07:53 lynx NetworkManager: <info>  Policy set 'Auto Waves Wireless - Framework N1' (wlan0) as default for routing and DNS.
Jan 18 09:07:53 lynx NetworkManager: <info>  Activation (wlan0) successful, device activated.
Jan 18 09:07:53 lynx NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 18 09:07:59 lynx kernel: [  397.240173] wlan0: no IPv6 routers present
Jan 18 09:11:12 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  completed -> group handshake
Jan 18 09:11:12 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
Jan 18 09:20:33 lynx dhclient: DHCPREQUEST of 192.168.1.102 on wlan0 to 192.168.1.1 port 67
Jan 18 09:20:33 lynx dhclient: DHCPACK of 192.168.1.102 from 192.168.1.1
Jan 18 09:20:33 lynx dhclient: bound to 192.168.1.102 -- renewal in 826 seconds.
Jan 18 09:20:34 lynx NetworkManager: <info>  DHCP: device wlan0 state changed reboot -> renew
Jan 18 09:20:34 lynx NetworkManager: <info>    address 192.168.1.102
Jan 18 09:20:34 lynx NetworkManager: <info>    prefix 24 (255.255.255.0)
Jan 18 09:20:34 lynx NetworkManager: <info>    gateway 192.168.1.1
Jan 18 09:20:34 lynx NetworkManager: <info>    nameserver '192.168.1.1'
Jan 18 09:20:34 lynx NetworkManager: <info>    domain name 'vc.shawcable.net'
Jan 18 09:22:12 lynx kernel: [ 1250.918186] [TTM] Failed moving buffer. Proposed placement 0x00060004
Jan 18 09:22:12 lynx kernel: [ 1250.919230] [drm:radeon_object_list_validate] *ERROR* radeon: failed to validate.
Jan 18 09:22:12 lynx kernel: [ 1250.919377] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation !
Jan 18 09:30:08 lynx kernel: Kernel logging (proc) stopped.
Jan 18 09:31:18 lynx kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started.
Jan 18 09:31:18 lynx kernel: [    0.000000] Initializing cgroup subsys cpuset
Jan 18 09:31:18 lynx kernel: [    0.000000] Initializing cgroup subsys cpu
Jan 18 09:31:18 lynx kernel: [    0.000000] Linux version 2.6.32-10-generic (buildd@palmer) (gcc version 4.4.3 20100105 (prerelease) (Ubuntu 4.4.2-8ubuntu2) ) #14-Ubuntu SMP Thu Jan 7 17:38:40 UTC 2010 (Ubuntu 2.6.32-10.14-generic)
Jan 18 09:31:18 lynx kernel: [    0.000000] KERNEL supported cpus:
Jan 18 09:31:18 lynx kernel: [    0.000000]   Intel GenuineIntel
Jan 18 09:31:18 lynx kernel: [    0.000000]   AMD AuthenticAMD
Jan 18 09:31:18 lynx kernel: [    0.000000]   NSC Geode by NSC
Jan 18 09:31:18 lynx kernel: [    0.000000]   Cyrix CyrixInstead
Jan 18 09:31:18 lynx kernel: [    0.000000]   Centaur CentaurHauls
Jan 18 09:31:18 lynx kernel: [    0.000000]   Transmeta GenuineTMx86
Jan 18 09:31:18 lynx kernel: [    0.000000]   Transmeta TransmetaCPU
Jan 18 09:31:18 lynx kernel: [    0.000000]   UMC UMC UMC UMC
Jan 18 09:31:18 lynx kernel: [    0.000000] BIOS-provided physical RAM map:
Jan 18 09:31:18 lynx kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jan 18 09:31:18 lynx kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jan 18 09:31:18 lynx kernel: [    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jan 18 09:31:18 lynx kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000001e6f0000 (usable)
Jan 18 09:31:18 lynx kernel: [    0.000000]  BIOS-e820: 000000001e6f0000 - 000000001e6ff000 (ACPI data)
Jan 18 09:31:18 lynx kernel: [    0.000000]  BIOS-e820: 000000001e6ff000 - 000000001e700000 (ACPI NVS)
Jan 18 09:31:18 lynx kernel: [    0.000000]  BIOS-e820: 000000001e700000 - 000000001e800000 (reserved)
Jan 18 09:31:18 lynx kernel: [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Jan 18 09:31:18 lynx kernel: [    0.000000] DMI present.
Jan 18 09:31:18 lynx kernel: [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
Jan 18 09:31:18 lynx kernel: [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Jan 18 09:31:18 lynx kernel: [    0.000000] last_pfn = 0x1e6f0 max_arch_pfn = 0x100000
Jan 18 09:31:18 lynx kernel: [    0.000000] MTRR default type: write-back
Jan 18 09:31:18 lynx kernel: [    0.000000] MTRR fixed ranges enabled:
Jan 18 09:31:18 lynx kernel: [    0.000000]   00000-C7FFF write-back
Jan 18 09:31:18 lynx kernel: [    0.000000]   C8000-E3FFF uncachable
Jan 18 09:31:18 lynx kernel: [    0.000000]   E4000-FFFFF write-back
Jan 18 09:31:18 lynx kernel: [    0.000000] MTRR variable ranges enabled:
Jan 18 09:31:18 lynx kernel: [    0.000000]   0 disabled
Jan 18 09:31:18 lynx kernel: [    0.000000]   1 disabled
Jan 18 09:31:18 lynx kernel: [    0.000000]   2 disabled
Jan 18 09:31:18 lynx kernel: [    0.000000]   3 disabled
Jan 18 09:31:18 lynx kernel: [    0.000000]   4 disabled
Jan 18 09:31:18 lynx kernel: [    0.000000]   5 disabled
Jan 18 09:31:18 lynx kernel: [    0.000000]   6 disabled
Jan 18 09:31:18 lynx kernel: [    0.000000]   7 disabled
Jan 18 09:31:18 lynx kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jan 18 09:31:18 lynx kernel: [    0.000000] Scanning 0 areas for low memory corruption
Jan 18 09:31:18 lynx kernel: [    0.000000] modified physical RAM map:
Jan 18 09:31:18 lynx kernel: [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
Jan 18 09:31:18 lynx kernel: [    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
Jan 18 09:31:18 lynx kernel: [    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
Jan 18 09:31:18 lynx kernel: [    0.000000]  modified: 00000000000dc000 - 0000000000100000 (reserved)
Jan 18 09:31:18 lynx kernel: [    0.000000]  modified: 0000000000100000 - 000000001e6f0000 (usable)
Jan 18 09:31:18 lynx kernel: [    0.000000]  modified: 000000001e6f0000 - 000000001e6ff000 (ACPI data)
Jan 18 09:31:18 lynx kernel: [    0.000000]  modified: 000000001e6ff000 - 000000001e700000 (ACPI NVS)
Jan 18 09:31:18 lynx kernel: [    0.000000]  modified: 000000001e700000 - 000000001e800000 (reserved)
Jan 18 09:31:18 lynx kernel: [    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
Jan 18 09:31:18 lynx kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Jan 18 09:31:18 lynx kernel: [    0.000000] init_memory_mapping: 0000000000000000-000000001e6f0000
Jan 18 09:31:18 lynx kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Jan 18 09:31:18 lynx kernel: [    0.000000]  0000000000 - 0000400000 page 4k
Jan 18 09:31:18 lynx kernel: [    0.000000]  0000400000 - 001e400000 page 2M
Jan 18 09:31:18 lynx kernel: [    0.000000]  001e400000 - 001e6f0000 page 4k
Jan 18 09:31:18 lynx kernel: [    0.000000] kernel direct mapping tables up to 1e6f0000 @ 10000-15000
Jan 18 09:31:18 lynx kernel: [    0.000000] RAMDISK: 164ed000 - 16d73822
Jan 18 09:31:18 lynx kernel: [    0.000000] ACPI: RSDP 000f8170 00014 (v00 PTLTD )
Jan 18 09:31:18 lynx kernel: [    0.000000] ACPI: RSDT 1e6fae47 00030 (v01 PTLTD  RSDT     06040005  LTP 00000000)
Jan 18 09:31:18 lynx kernel: [    0.000000] ACPI: FACP 1e6fedd6 00074 (v01 PTLDT  RSDT     06040005 PTL  000F4240)
Jan 18 09:31:18 lynx kernel: [    0.000000] ACPI: DSDT 1e6fae77 03F5F (v01 PTLTD  DSDT     06040005 MSFT 0100000E)
Jan 18 09:31:18 lynx kernel: [    0.000000] ACPI: FACS 1e6fffc0 00040
Jan 18 09:31:18 lynx kernel: [    0.000000] ACPI: SSDT 1e6fee4a 000BC (v01 PTLTD  ACPICST1 06040005  LTP 00000001)
Jan 18 09:31:18 lynx kernel: [    0.000000] ACPI: SSDT 1e6fef06 000FA (v01 PTLTD  ACPIPST1 06040005  LTP 00000001)
Jan 18 09:31:18 lynx kernel: [    0.000000] 0MB HIGHMEM available.
Jan 18 09:31:18 lynx kernel: [    0.000000] 486MB LOWMEM available.
Jan 18 09:31:18 lynx kernel: [    0.000000]   mapped low ram: 0 - 1e6f0000
Jan 18 09:31:18 lynx kernel: [    0.000000]   low ram: 0 - 1e6f0000
Jan 18 09:31:18 lynx kernel: [    0.000000]   node 0 low ram: 00000000 - 1e6f0000
Jan 18 09:31:18 lynx kernel: [    0.000000]   node 0 bootmap 00011000 - 00014ce0
Jan 18 09:31:18 lynx kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001e6f0000]
Jan 18 09:31:18 lynx kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Jan 18 09:31:18 lynx kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Jan 18 09:31:18 lynx kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Jan 18 09:31:18 lynx kernel: [    0.000000]   #3 [0000100000 - 000092b018]    TEXT DATA BSS ==> [0000100000 - 000092b018]
Jan 18 09:31:18 lynx kernel: [    0.000000]   #4 [00164ed000 - 0016d73822]          RAMDISK ==> [00164ed000 - 0016d73822]
Jan 18 09:31:18 lynx kernel: [    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
Jan 18 09:31:18 lynx kernel: [    0.000000]   #6 [000092c000 - 000092f170]              BRK ==> [000092c000 - 000092f170]
Jan 18 09:31:18 lynx kernel: [    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
Jan 18 09:31:18 lynx kernel: [    0.000000]   #8 [0000011000 - 0000015000]          BOOTMAP ==> [0000011000 - 0000015000]
Jan 18 09:31:18 lynx kernel: [    0.000000] Zone PFN ranges:
Jan 18 09:31:18 lynx kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Jan 18 09:31:18 lynx kernel: [    0.000000]   Normal   0x00001000 -> 0x0001e6f0
Jan 18 09:31:18 lynx kernel: [    0.000000]   HighMem  0x0001e6f0 -> 0x0001e6f0
Jan 18 09:31:18 lynx kernel: [    0.000000] Movable zone start PFN for each node
Jan 18 09:31:18 lynx kernel: [    0.000000] early_node_map[2] active PFN ranges
Jan 18 09:31:18 lynx kernel: [    0.000000]     0: 0x00000010 -> 0x0000009f
Jan 18 09:31:18 lynx kernel: [    0.000000]     0: 0x00000100 -> 0x0001e6f0
Jan 18 09:31:18 lynx kernel: [    0.000000] On node 0 totalpages: 124543
Jan 18 09:31:18 lynx kernel: [    0.000000] free_area_init_node: node 0, pgdat c07e77c0, node_mem_map c1001200
Jan 18 09:31:18 lynx kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Jan 18 09:31:18 lynx kernel: [    0.000000]   DMA zone: 0 pages reserved
Jan 18 09:31:18 lynx kernel: [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
Jan 18 09:31:18 lynx kernel: [    0.000000]   Normal zone: 942 pages used for memmap
Jan 18 09:31:18 lynx kernel: [    0.000000]   Normal zone: 119618 pages, LIFO batch:31
Jan 18 09:31:18 lynx kernel: [    0.000000] Using APIC driver default
Jan 18 09:31:18 lynx kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x8008
Jan 18 09:31:18 lynx kernel: [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
Jan 18 09:31:18 lynx kernel: [    0.000000] No local APIC present or hardware disabled
Jan 18 09:31:18 lynx kernel: [    0.000000] APIC: disable apic facility
Jan 18 09:31:18 lynx kernel: [    0.000000] nr_irqs_gsi: 16
Jan 18 09:31:18 lynx kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jan 18 09:31:18 lynx kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
Jan 18 09:31:18 lynx kernel: [    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Jan 18 09:31:18 lynx kernel: [    0.000000] Allocating PCI resources starting at 1e800000 (gap: 1e800000:e1780000)
Jan 18 09:31:18 lynx kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Jan 18 09:31:18 lynx kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
Jan 18 09:31:18 lynx kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s35896 r0 d21448 u4194304
Jan 18 09:31:18 lynx kernel: [    0.000000] pcpu-alloc: s35896 r0 d21448 u4194304 alloc=1*4194304
Jan 18 09:31:18 lynx kernel: [    0.000000] pcpu-alloc: [0] 0 
Jan 18 09:31:18 lynx kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 123569
Jan 18 09:31:18 lynx kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-10-generic root=UUID=413ddaa2-ae4b-4f5f-b8a7-8546e8ff57b9 ro quiet splash
Jan 18 09:31:18 lynx kernel: [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Jan 18 09:31:18 lynx kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 18 09:31:18 lynx kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 18 09:31:18 lynx kernel: [    0.000000] Enabling fast FPU save and restore... done.
Jan 18 09:31:18 lynx kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Jan 18 09:31:18 lynx kernel: [    0.000000] Initializing CPU#0
Jan 18 09:31:18 lynx kernel: [    0.000000] allocated 2492800 bytes of page_cgroup
Jan 18 09:31:18 lynx kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jan 18 09:31:18 lynx kernel: [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
Jan 18 09:31:18 lynx kernel: [    0.000000] Memory: 473960k/498624k available (4859k kernel code, 23948k reserved, 2251k data, 660k init, 0k highmem)
Jan 18 09:31:18 lynx kernel: [    0.000000] virtual kernel memory layout:
Jan 18 09:31:18 lynx kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Jan 18 09:31:18 lynx kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Jan 18 09:31:18 lynx kernel: [    0.000000]     vmalloc : 0xdeef0000 - 0xff7fe000   ( 521 MB)
Jan 18 09:31:18 lynx kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xde6f0000   ( 486 MB)
Jan 18 09:31:18 lynx kernel: [    0.000000]       .init : 0xc07f2000 - 0xc0897000   ( 660 kB)
Jan 18 09:31:18 lynx kernel: [    0.000000]       .data : 0xc05bef0b - 0xc07f1be8   (2251 kB)
Jan 18 09:31:18 lynx kernel: [    0.000000]       .text : 0xc0100000 - 0xc05bef0b   (4859 kB)
Jan 18 09:31:18 lynx kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jan 18 09:31:18 lynx kernel: [    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan 18 09:31:18 lynx kernel: [    0.000000] Hierarchical RCU implementation.
Jan 18 09:31:18 lynx kernel: [    0.000000] NR_IRQS:2304 nr_irqs:256
Jan 18 09:31:18 lynx kernel: [    0.000000] spurious 8259A interrupt: IRQ7.
Jan 18 09:31:18 lynx kernel: [    0.000000] Console: colour VGA+ 80x25
Jan 18 09:31:18 lynx kernel: [    0.000000] console [tty0] enabled
Jan 18 09:31:18 lynx kernel: [    0.000000] Fast TSC calibration failed
Jan 18 09:31:18 lynx kernel: [    0.000000] TSC: PIT calibration matches PMTIMER. 2 loops
Jan 18 09:31:18 lynx kernel: [    0.000000] Detected 994.476 MHz processor.
Jan 18 09:31:18 lynx kernel: [    0.016051] Calibrating delay loop (skipped), value calculated using timer frequency.. 1988.95 BogoMIPS (lpj=3977904)
Jan 18 09:31:18 lynx kernel: [    0.020319] Security Framework initialized
Jan 18 09:31:18 lynx kernel: [    0.020853] AppArmor: AppArmor initialized
Jan 18 09:31:18 lynx kernel: [    0.021483] Mount-cache hash table entries: 512
Jan 18 09:31:18 lynx kernel: [    0.029449] Initializing cgroup subsys ns
Jan 18 09:31:18 lynx kernel: [    0.029494] Initializing cgroup subsys cpuacct
Jan 18 09:31:18 lynx kernel: [    0.030717] Initializing cgroup subsys memory
Jan 18 09:31:18 lynx kernel: [    0.030833] Initializing cgroup subsys devices
Jan 18 09:31:18 lynx kernel: [    0.030859] Initializing cgroup subsys freezer
Jan 18 09:31:18 lynx kernel: [    0.030881] Initializing cgroup subsys net_cls
Jan 18 09:31:18 lynx kernel: [    0.032183] CPU: L1 I Cache: 128K (64 bytes/line), D cache 64K (32 bytes/line)
Jan 18 09:31:18 lynx kernel: [    0.032274] CPU: L2 Cache: 1024K (128 bytes/line)
Jan 18 09:31:18 lynx kernel: [    0.032316] CPU: Processor revision 24C01189, 1000 MHz
Jan 18 09:31:18 lynx kernel: [    0.032335] CPU: Code Morphing Software revision 6.0.0-1-10074
Jan 18 09:31:18 lynx kernel: [    0.032481] CPU: 20031021 12:18 official release 6.0.0#12
Jan 18 09:31:18 lynx kernel: [    0.032529] mce: CPU supports 4 MCE banks
Jan 18 09:31:18 lynx kernel: [    0.032877] Performance Events: 
Jan 18 09:31:18 lynx kernel: [    0.033141] Checking 'hlt' instruction... OK.
Jan 18 09:31:18 lynx kernel: [    0.051069] SMP alternatives: switching to UP code
Jan 18 09:31:18 lynx kernel: [    0.072981] Freeing SMP alternatives: 20k freed
Jan 18 09:31:18 lynx kernel: [    0.074130] ACPI: Core revision 20090903
Jan 18 09:31:18 lynx kernel: [    0.138837] ACPI: setting ELCR to 0200 (from 0638)
Jan 18 09:31:18 lynx kernel: [    0.140571] ftrace: converting mcount calls to 0f 1f 44 00 00
Jan 18 09:31:18 lynx kernel: [    0.140649] ftrace: allocating 23089 entries in 46 pages
Jan 18 09:31:18 lynx kernel: [    0.156973] weird, boot CPU (#0) not listed by the BIOS.
Jan 18 09:31:18 lynx kernel: [    0.157187] SMP motherboard not detected.
Jan 18 09:31:18 lynx kernel: [    0.157309] Local APIC not detected. Using dummy APIC emulation.
Jan 18 09:31:18 lynx kernel: [    0.157543] SMP disabled
Jan 18 09:31:18 lynx kernel: [    0.163672] Brought up 1 CPUs
Jan 18 09:31:18 lynx kernel: [    0.164624] Total of 1 processors activated (1988.95 BogoMIPS).
Jan 18 09:31:18 lynx kernel: [    0.167450] CPU0 attaching NULL sched-domain.
Jan 18 09:31:18 lynx kernel: [    0.178430] devtmpfs: initialized
Jan 18 09:31:18 lynx kernel: [    0.203637] regulator: core version 0.5
Jan 18 09:31:18 lynx kernel: [    0.204367] Time: 17:30:38  Date: 01/18/10
Jan 18 09:31:18 lynx kernel: [    0.206590] NET: Registered protocol family 16
Jan 18 09:31:18 lynx kernel: [    0.213952] EISA bus registered
Jan 18 09:31:18 lynx kernel: [    0.214251] ACPI: bus type pci registered
Jan 18 09:31:18 lynx kernel: [    0.217245] PCI: PCI BIOS revision 2.10 entry at 0xfd8ac, last bus=2
Jan 18 09:31:18 lynx kernel: [    0.217280] PCI: Using configuration type 1 for base access
Jan 18 09:31:18 lynx kernel: [    0.234882] bio: create slab <bio-0> at 0
Jan 18 09:31:18 lynx kernel: [    0.244510] ACPI: EC: Look up EC in DSDT
Jan 18 09:31:18 lynx kernel: [    0.309195] ACPI: Interpreter enabled
Jan 18 09:31:18 lynx kernel: [    0.309253] ACPI: (supports S0 S3 S4 S5)
Jan 18 09:31:18 lynx kernel: [    0.309694] ACPI: Using PIC for interrupt routing
Jan 18 09:31:18 lynx kernel: [    0.362191] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
Jan 18 09:31:18 lynx kernel: [    0.363780] ACPI: No dock devices found.
Jan 18 09:31:18 lynx kernel: [    0.376584] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 18 09:31:18 lynx kernel: [    0.377992] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xec000000-0xefffffff]
Jan 18 09:31:18 lynx kernel: [    0.381919] pci 0000:00:03.1: quirk: region 8000-803f claimed by ali7101 ACPI
Jan 18 09:31:18 lynx kernel: [    0.382346] pci 0000:00:04.0: reg 10 io port: [0x1000-0x10ff]
Jan 18 09:31:18 lynx kernel: [    0.382399] pci 0000:00:04.0: reg 14 32bit mmio: [0xe8002000-0xe8002fff]
Jan 18 09:31:18 lynx kernel: [    0.382672] pci 0000:00:04.0: supports D1 D2
Jan 18 09:31:18 lynx kernel: [    0.382800] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold
Jan 18 09:31:18 lynx kernel: [    0.382892] pci 0000:00:04.0: PME# disabled
Jan 18 09:31:18 lynx kernel: [    0.383040] pci 0000:00:06.0: reg 10 32bit mmio: [0xe8000000-0xe8001fff]
Jan 18 09:31:18 lynx kernel: [    0.383229] pci 0000:00:06.0: supports D1 D2
Jan 18 09:31:18 lynx kernel: [    0.383273] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
Jan 18 09:31:18 lynx kernel: [    0.383299] pci 0000:00:06.0: PME# disabled
Jan 18 09:31:18 lynx kernel: [    0.383512] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
Jan 18 09:31:18 lynx kernel: [    0.383578] pci 0000:00:09.0: supports D1 D2
Jan 18 09:31:18 lynx kernel: [    0.383590] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
Jan 18 09:31:18 lynx kernel: [    0.383671] pci 0000:00:09.0: PME# disabled
Jan 18 09:31:18 lynx kernel: [    0.384280] pci 0000:00:0a.0: reg 10 io port: [0x1400-0x14ff]
Jan 18 09:31:18 lynx kernel: [    0.384328] pci 0000:00:0a.0: reg 14 32bit mmio: [0xe8005000-0xe80050ff]
Jan 18 09:31:18 lynx kernel: [    0.384631] pci 0000:00:0a.0: supports D1 D2
Jan 18 09:31:18 lynx kernel: [    0.384646] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold
Jan 18 09:31:18 lynx kernel: [    0.384669] pci 0000:00:0a.0: PME# disabled
Jan 18 09:31:18 lynx kernel: [    0.384990] pci 0000:00:0e.0: reg 10 io port: [0x1f0-0x1ff]
Jan 18 09:31:18 lynx kernel: [    0.385033] pci 0000:00:0e.0: reg 14 io port: [0x3f4-0x3f7]
Jan 18 09:31:18 lynx kernel: [    0.385077] pci 0000:00:0e.0: reg 18 io port: [0x170-0x17f]
Jan 18 09:31:18 lynx kernel: [    0.385118] pci 0000:00:0e.0: reg 1c io port: [0x374-0x377]
Jan 18 09:31:18 lynx kernel: [    0.385158] pci 0000:00:0e.0: reg 20 io port: [0x1800-0x180f]
Jan 18 09:31:18 lynx kernel: [    0.385529] pci 0000:00:0f.0: reg 10 32bit mmio: [0xe8003000-0xe8003fff]
Jan 18 09:31:18 lynx kernel: [    0.385641] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
Jan 18 09:31:18 lynx kernel: [    0.385662] pci 0000:00:0f.0: PME# disabled
Jan 18 09:31:18 lynx kernel: [    0.385884] pci 0000:00:0f.1: reg 10 32bit mmio: [0xe8004000-0xe8004fff]
Jan 18 09:31:18 lynx kernel: [    0.386089] pci 0000:00:0f.1: PME# supported from D0 D3hot D3cold
Jan 18 09:31:18 lynx kernel: [    0.386112] pci 0000:00:0f.1: PME# disabled
Jan 18 09:31:18 lynx kernel: [    0.386373] pci 0000:00:0f.3: reg 10 32bit mmio: [0xe8005400-0xe80054ff]
Jan 18 09:31:18 lynx kernel: [    0.386583] pci 0000:00:0f.3: PME# supported from D0 D3hot D3cold
Jan 18 09:31:18 lynx kernel: [    0.386634] pci 0000:00:0f.3: PME# disabled
Jan 18 09:31:18 lynx kernel: [    0.387049] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
Jan 18 09:31:18 lynx kernel: [    0.387083] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
Jan 18 09:31:18 lynx kernel: [    0.387116] pci 0000:01:00.0: reg 18 32bit mmio: [0xe8100000-0xe810ffff]
Jan 18 09:31:18 lynx kernel: [    0.387164] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
Jan 18 09:31:18 lynx kernel: [    0.387253] pci 0000:01:00.0: supports D1 D2
Jan 18 09:31:18 lynx kernel: [    0.387339] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
Jan 18 09:31:18 lynx kernel: [    0.387368] pci 0000:00:01.0: bridge 32bit mmio: [0xe8100000-0xe81fffff]
Jan 18 09:31:18 lynx kernel: [    0.387396] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
Jan 18 09:31:18 lynx kernel: [    0.388055] pci_bus 0000:00: on NUMA node 0
Jan 18 09:31:18 lynx kernel: [    0.388094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 18 09:31:18 lynx kernel: [    0.390551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Jan 18 09:31:18 lynx kernel: [    0.407809] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
Jan 18 09:31:18 lynx kernel: [    0.410306] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
Jan 18 09:31:18 lynx kernel: [    0.413003] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
Jan 18 09:31:18 lynx kernel: [    0.414844] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
Jan 18 09:31:18 lynx kernel: [    0.416255] ACPI: PCI Interrupt Link [LNKE] (IRQs *5)
Jan 18 09:31:18 lynx kernel: [    0.417946] ACPI: PCI Interrupt Link [LNKF] (IRQs *5)
Jan 18 09:31:18 lynx kernel: [    0.419687] ACPI: PCI Interrupt Link [LNKG] (IRQs *9)
Jan 18 09:31:18 lynx kernel: [    0.421485] ACPI: PCI Interrupt Link [LNKU] (IRQs 11) *0, disabled.
Jan 18 09:31:18 lynx kernel: [    0.424153] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Jan 18 09:31:18 lynx kernel: [    0.424251] vgaarb: loaded
Jan 18 09:31:18 lynx kernel: [    0.426276] SCSI subsystem initialized
Jan 18 09:31:18 lynx kernel: [    0.427144] libata version 3.00 loaded.
Jan 18 09:31:18 lynx kernel: [    0.429804] usbcore: registered new interface driver usbfs
Jan 18 09:31:18 lynx kernel: [    0.429953] usbcore: registered new interface driver hub
Jan 18 09:31:19 lynx kernel: [    0.430888] usbcore: registered new device driver usb
Jan 18 09:31:19 lynx kernel: [    0.434594] ACPI: WMI: Mapper loaded
Jan 18 09:31:19 lynx kernel: [    0.434609] PCI: Using ACPI for IRQ routing
Jan 18 09:31:19 lynx kernel: [    0.439184] Bluetooth: Core ver 2.15
Jan 18 09:31:19 lynx kernel: [    0.446596] NET: Registered protocol family 31
Jan 18 09:31:19 lynx kernel: [    0.446610] Bluetooth: HCI device and connection manager initialized
Jan 18 09:31:19 lynx kernel: [    0.446634] Bluetooth: HCI socket layer initialized
Jan 18 09:31:19 lynx kernel: [    0.446651] NetLabel: Initializing
Jan 18 09:31:19 lynx kernel: [    0.446658] NetLabel:  domain hash size = 128
Jan 18 09:31:19 lynx kernel: [    0.446664] NetLabel:  protocols = UNLABELED CIPSOv4
Jan 18 09:31:19 lynx kernel: [    0.449103] NetLabel:  unlabeled traffic allowed by default
Jan 18 09:31:19 lynx kernel: [    0.450187] Switching to clocksource tsc
Jan 18 09:31:19 lynx kernel: [    0.468777] AppArmor: AppArmor Filesystem Enabled
Jan 18 09:31:19 lynx kernel: [    0.468946] pnp: PnP ACPI init
Jan 18 09:31:19 lynx kernel: [    0.469024] ACPI: bus type pnp registered
Jan 18 09:31:19 lynx kernel: [    0.482167] pnp: PnP ACPI: found 8 devices
Jan 18 09:31:19 lynx kernel: [    0.482188] ACPI: ACPI bus type pnp unregistered
Jan 18 09:31:19 lynx kernel: [    0.482208] PnPBIOS: Disabled by ACPI PNP
Jan 18 09:31:19 lynx kernel: [    0.482398] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482491] system 00:07: ioport range 0x8000-0x807f could not be reserved
Jan 18 09:31:19 lynx kernel: [    0.482518] system 00:07: ioport range 0x8080-0x808d has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482545] system 00:07: ioport range 0xd000-0xd000 has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482567] system 00:07: ioport range 0xd004-0xd004 has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482587] system 00:07: ioport range 0xd002-0xd002 has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482608] system 00:07: ioport range 0xd006-0xd006 has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482628] system 00:07: ioport range 0x480-0x48f has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482652] system 00:07: ioport range 0x809-0x80f has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482673] system 00:07: ioport range 0xfe10-0xfe11 has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482699] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482722] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
Jan 18 09:31:19 lynx kernel: [    0.482744] system 00:07: iomem range 0xffe00000-0xffffffff could not be reserved
Jan 18 09:31:19 lynx kernel: [    0.521879] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Jan 18 09:31:19 lynx kernel: [    0.521905] pci 0000:00:01.0:   IO window: 0x2000-0x2fff
Jan 18 09:31:19 lynx kernel: [    0.521927] pci 0000:00:01.0:   MEM window: 0xe8100000-0xe81fffff
Jan 18 09:31:19 lynx kernel: [    0.521954] pci 0000:00:01.0:   PREFETCH window: 0xf0000000-0xf7ffffff
Jan 18 09:31:19 lynx kernel: [    0.521981] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
Jan 18 09:31:19 lynx kernel: [    0.521989] pci 0000:00:02.0:   IO window: disabled
Jan 18 09:31:19 lynx kernel: [    0.522007] pci 0000:00:02.0:   MEM window: disabled
Jan 18 09:31:19 lynx kernel: [    0.522023] pci 0000:00:02.0:   PREFETCH window: disabled
Jan 18 09:31:19 lynx kernel: [    0.522047] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:03
Jan 18 09:31:19 lynx kernel: [    0.522061] pci 0000:00:09.0:   IO window: 0x001c00-0x001cff
Jan 18 09:31:19 lynx kernel: [    0.522081] pci 0000:00:09.0:   IO window: 0x003000-0x0030ff
Jan 18 09:31:19 lynx kernel: [    0.522099] pci 0000:00:09.0:   PREFETCH window: 0x20000000-0x23ffffff
Jan 18 09:31:19 lynx kernel: [    0.522117] pci 0000:00:09.0:   MEM window: 0x24000000-0x27ffffff
Jan 18 09:31:19 lynx kernel: [    0.522205] pci 0000:00:01.0: setting latency timer to 64
Jan 18 09:31:19 lynx kernel: [    0.522900] pci 0000:00:02.0: setting latency timer to 64
Jan 18 09:31:19 lynx kernel: [    0.525278] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
Jan 18 09:31:19 lynx kernel: [    0.525301] PCI: setting IRQ 9 as level-triggered
Jan 18 09:31:19 lynx kernel: [    0.525325] pci 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
Jan 18 09:31:19 lynx kernel: [    0.525389] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Jan 18 09:31:19 lynx kernel: [    0.525633] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Jan 18 09:31:19 lynx kernel: [    0.526054] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
Jan 18 09:31:19 lynx kernel: [    0.526150] pci_bus 0000:01: resource 1 mem: [0xe8100000-0xe81fffff]
Jan 18 09:31:19 lynx kernel: [    0.526165] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
Jan 18 09:31:19 lynx kernel: [    0.526241] pci_bus 0000:03: resource 0 io:  [0x1c00-0x1cff]
Jan 18 09:31:19 lynx kernel: [    0.526253] pci_bus 0000:03: resource 1 io:  [0x3000-0x30ff]
Jan 18 09:31:19 lynx kernel: [    0.526265] pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff]
Jan 18 09:31:19 lynx kernel: [    0.526278] pci_bus 0000:03: resource 3 mem: [0x24000000-0x27ffffff]
Jan 18 09:31:19 lynx kernel: [    0.526976] NET: Registered protocol family 2
Jan 18 09:31:19 lynx kernel: [    0.529465] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 18 09:31:19 lynx kernel: [    0.534063] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Jan 18 09:31:19 lynx kernel: [    0.535148] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
Jan 18 09:31:19 lynx kernel: [    0.535697] TCP: Hash tables configured (established 16384 bind 16384)
Jan 18 09:31:19 lynx kernel: [    0.535716] TCP reno registered
Jan 18 09:31:19 lynx kernel: [    0.538492] NET: Registered protocol family 1
Jan 18 09:31:19 lynx kernel: [    0.972376] pci 0000:01:00.0: Boot video device
Jan 18 09:31:19 lynx kernel: [    0.974680] cpufreq-nforce2: No nForce2 chipset.
Jan 18 09:31:19 lynx kernel: [    0.974847] Scanning for low memory corruption every 60 seconds
Jan 18 09:31:19 lynx kernel: [    0.978687] audit: initializing netlink socket (disabled)
Jan 18 09:31:19 lynx kernel: [    0.978847] type=2000 audit(1263835838.976:1): initialized
Jan 18 09:31:19 lynx kernel: [    1.008027] Trying to unpack rootfs image as initramfs...
Jan 18 09:31:19 lynx kernel: [    1.036812] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Jan 18 09:31:19 lynx kernel: [    1.053654] VFS: Disk quotas dquot_6.5.2
Jan 18 09:31:19 lynx kernel: [    1.054313] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 18 09:31:19 lynx kernel: [    1.069145] fuse init (API version 7.13)
Jan 18 09:31:19 lynx kernel: [    1.069875] msgmni has been set to 926
Jan 18 09:31:19 lynx kernel: [    1.076616] alg: No test for stdrng (krng)
Jan 18 09:31:19 lynx kernel: [    1.076919] io scheduler noop registered
Jan 18 09:31:19 lynx kernel: [    1.076936] io scheduler anticipatory registered
Jan 18 09:31:19 lynx kernel: [    1.076949] io scheduler deadline registered
Jan 18 09:31:19 lynx kernel: [    1.077405] io scheduler cfq registered (default)
Jan 18 09:31:19 lynx kernel: [    1.079332] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 18 09:31:19 lynx kernel: [    1.079755] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan 18 09:31:19 lynx kernel: [    1.086295] ACPI: AC Adapter [AC] (on-line)
Jan 18 09:31:19 lynx kernel: [    1.087904] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Jan 18 09:31:19 lynx kernel: [    1.088030] ACPI: Power Button [PWRB]
Jan 18 09:31:19 lynx kernel: [    1.088900] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Jan 18 09:31:19 lynx kernel: [    1.089806] ACPI: Lid Switch [LID0]
Jan 18 09:31:19 lynx kernel: [    1.090508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Jan 18 09:31:19 lynx kernel: [    1.090539] ACPI: Power Button [PWRF]
Jan 18 09:31:19 lynx kernel: [    1.092636] Marking TSC unstable due to TSC halts in idle
Jan 18 09:31:19 lynx kernel: [    1.096532] Switching to clocksource acpi_pm
Jan 18 09:31:19 lynx kernel: [    1.096989] processor LNXCPU:00: registered as cooling_device0
Jan 18 09:31:19 lynx kernel: [    1.121235] thermal LNXTHERM:01: registered as thermal_zone0
Jan 18 09:31:19 lynx kernel: [    1.121304] ACPI: Thermal Zone [THRM] (54 C)
Jan 18 09:31:19 lynx kernel: [    1.133143] ACPI: Battery Slot [BAT0] (battery present)
Jan 18 09:31:19 lynx kernel: [    1.133391] isapnp: Scanning for PnP cards...
Jan 18 09:31:19 lynx kernel: [    1.218307] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jan 18 09:31:19 lynx kernel: [    1.239116] brd: module loaded
Jan 18 09:31:19 lynx kernel: [    1.252984] loop: module loaded
Jan 18 09:31:19 lynx kernel: [    1.253915] input: Macintosh mouse button emulation as /devices/virtual/input/input3
Jan 18 09:31:19 lynx kernel: [    1.260989] pata_ali 0000:00:0e.0: can't derive routing for PCI INT A
Jan 18 09:31:19 lynx kernel: [    1.268561] scsi0 : pata_ali
Jan 18 09:31:19 lynx kernel: [    1.269499] scsi1 : pata_ali
Jan 18 09:31:19 lynx kernel: [    1.275122] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14
Jan 18 09:31:19 lynx kernel: [    1.275144] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15
Jan 18 09:31:19 lynx kernel: [    1.284804] Fixed MDIO Bus: probed
Jan 18 09:31:19 lynx kernel: [    1.333251] PPP generic driver version 2.4.2
Jan 18 09:31:19 lynx kernel: [    1.333569] tun: Universal TUN/TAP device driver, 1.6
Jan 18 09:31:19 lynx kernel: [    1.333578] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 18 09:31:19 lynx kernel: [    1.335576] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 18 09:31:19 lynx kernel: [    1.340926] ACPI: PCI Interrupt Link [LNKU] BIOS reported IRQ 0, using IRQ 11
Jan 18 09:31:19 lynx kernel: [    1.340947] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 11
Jan 18 09:31:19 lynx kernel: [    1.340965] PCI: setting IRQ 11 as level-triggered
Jan 18 09:31:19 lynx kernel: [    1.340989] ehci_hcd 0000:00:0f.3: PCI INT D -> Link[LNKU] -> GSI 11 (level, low) -> IRQ 11
Jan 18 09:31:19 lynx kernel: [    1.341374] ehci_hcd 0000:00:0f.3: EHCI Host Controller
Jan 18 09:31:19 lynx kernel: [    1.341668] ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 1
Jan 18 09:31:19 lynx kernel: [    1.342699] ehci_hcd 0000:00:0f.3: debug port 1
Jan 18 09:31:19 lynx kernel: [    1.342896] ehci_hcd 0000:00:0f.3: irq 11, io mem 0xe8005400
Jan 18 09:31:19 lynx kernel: [    1.352425] ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00
Jan 18 09:31:19 lynx kernel: [    1.354499] usb usb1: configuration #1 chosen from 1 choice
Jan 18 09:31:19 lynx kernel: [    1.354787] hub 1-0:1.0: USB hub found
Jan 18 09:31:19 lynx kernel: [    1.354910] hub 1-0:1.0: 6 ports detected
Jan 18 09:31:19 lynx kernel: [    1.355694] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 18 09:31:19 lynx kernel: [    1.360999] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
Jan 18 09:31:19 lynx kernel: [    1.361023] PCI: setting IRQ 5 as level-triggered
Jan 18 09:31:19 lynx kernel: [    1.361046] ohci_hcd 0000:00:0f.0: PCI INT A -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5
Jan 18 09:31:19 lynx kernel: [    1.361859] ohci_hcd 0000:00:0f.0: OHCI Host Controller
Jan 18 09:31:19 lynx kernel: [    1.362431] ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
Jan 18 09:31:19 lynx kernel: [    1.362583] ohci_hcd 0000:00:0f.0: irq 5, io mem 0xe8003000
Jan 18 09:31:19 lynx kernel: [    1.441500] usb usb2: configuration #1 chosen from 1 choice
Jan 18 09:31:19 lynx kernel: [    1.445532] ata1.00: ATA-5: HITACHI_DK14FA-20, 00MBA0A5, max UDMA/100
Jan 18 09:31:19 lynx kernel: [    1.445550] ata1.00: 39070080 sectors, multi 16: LBA 
Jan 18 09:31:19 lynx kernel: [    1.454044] ata1.00: configured for UDMA/100
Jan 18 09:31:19 lynx kernel: [    1.454831] hub 2-0:1.0: USB hub found
Jan 18 09:31:19 lynx kernel: [    1.454940] hub 2-0:1.0: 2 ports detected
Jan 18 09:31:19 lynx kernel: [    1.456565] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
Jan 18 09:31:19 lynx kernel: [    1.456599] ohci_hcd 0000:00:0f.1: PCI INT B -> Link[LNKF] -> GSI 5 (level, low) -> IRQ 5
Jan 18 09:31:19 lynx kernel: [    1.456760] ohci_hcd 0000:00:0f.1: OHCI Host Controller
Jan 18 09:31:19 lynx kernel: [    1.457396] ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
Jan 18 09:31:19 lynx kernel: [    1.457706] ohci_hcd 0000:00:0f.1: irq 5, io mem 0xe8004000
Jan 18 09:31:19 lynx kernel: [    1.539769] usb usb3: configuration #1 chosen from 1 choice
Jan 18 09:31:19 lynx kernel: [    1.544871] hub 3-0:1.0: USB hub found
Jan 18 09:31:19 lynx kernel: [    1.544982] hub 3-0:1.0: 2 ports detected
Jan 18 09:31:19 lynx kernel: [    1.545334] uhci_hcd: USB Universal Host Controller Interface driver
Jan 18 09:31:19 lynx kernel: [    1.546041] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Jan 18 09:31:19 lynx kernel: [    1.547736] serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 18 09:31:19 lynx kernel: [    1.547790] serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 18 09:31:19 lynx kernel: [    1.554574] mice: PS/2 mouse device common for all mice
Jan 18 09:31:19 lynx kernel: [    1.555135] Driver 'rtc_cmos' needs updating - please use bus_type methods
Jan 18 09:31:19 lynx kernel: [    1.556161] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Jan 18 09:31:19 lynx kernel: [    1.556277] rtc0: alarms up to one year, y3k, 242 bytes nvram
Jan 18 09:31:19 lynx kernel: [    1.556748] device-mapper: uevent: version 1.0.3
Jan 18 09:31:19 lynx kernel: [    1.559064] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Jan 18 09:31:19 lynx kernel: [    1.565397] device-mapper: multipath: version 1.1.0 loaded
Jan 18 09:31:19 lynx kernel: [    1.565423] device-mapper: multipath round-robin: version 1.0.0 loaded
Jan 18 09:31:19 lynx kernel: [    1.566948] EISA: Probing bus 0 at eisa.0
Jan 18 09:31:19 lynx kernel: [    1.567000] Cannot allocate resource for EISA slot 1
Jan 18 09:31:19 lynx kernel: [    1.567013] Cannot allocate resource for EISA slot 2
Jan 18 09:31:19 lynx kernel: [    1.567025] Cannot allocate resource for EISA slot 3
Jan 18 09:31:19 lynx kernel: [    1.567188] Cannot allocate resource for EISA slot 8
Jan 18 09:31:19 lynx kernel: [    1.567197] EISA: Detected 0 cards.
Jan 18 09:31:19 lynx kernel: [    1.568152] cpuidle: using governor ladder
Jan 18 09:31:19 lynx kernel: [    1.569232] cpuidle: using governor menu
Jan 18 09:31:19 lynx kernel: [    1.576109] TCP cubic registered
Jan 18 09:31:19 lynx kernel: [    1.577198] NET: Registered protocol family 10
Jan 18 09:31:19 lynx kernel: [    1.583489] lo: Disabled Privacy Extensions
Jan 18 09:31:19 lynx kernel: [    1.590085] NET: Registered protocol family 17
Jan 18 09:31:19 lynx kernel: [    1.590393] Bluetooth: L2CAP ver 2.14
Jan 18 09:31:19 lynx kernel: [    1.590404] Bluetooth: L2CAP socket layer initialized
Jan 18 09:31:19 lynx kernel: [    1.590427] Bluetooth: SCO (Voice Link) ver 0.6
Jan 18 09:31:19 lynx kernel: [    1.590434] Bluetooth: SCO socket layer initialized
Jan 18 09:31:19 lynx kernel: [    1.592963] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Jan 18 09:31:19 lynx kernel: [    1.593809] Bluetooth: RFCOMM TTY layer initialized
Jan 18 09:31:19 lynx kernel: [    1.593835] Bluetooth: RFCOMM socket layer initialized
Jan 18 09:31:19 lynx kernel: [    1.593844] Bluetooth: RFCOMM ver 1.11
Jan 18 09:31:19 lynx kernel: [    1.594013] Using IPI No-Shortcut mode
Jan 18 09:31:19 lynx kernel: [    1.594757] PM: Resume from disk failed.
Jan 18 09:31:19 lynx kernel: [    1.594880] registered taskstats version 1
Jan 18 09:31:19 lynx kernel: [    1.596311]   Magic number: 10:601:542
Jan 18 09:31:19 lynx kernel: [    1.604497] rtc_cmos 00:02: setting system clock to 2010-01-18 17:30:39 UTC (1263835839)
Jan 18 09:31:19 lynx kernel: [    1.605014] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Jan 18 09:31:19 lynx kernel: [    1.605030] EDD information not available.
Jan 18 09:31:19 lynx kernel: [    1.928492] isapnp: No Plug & Play device found
Jan 18 09:31:19 lynx kernel: [    1.931628] scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK14FA-2 00MB PQ: 0 ANSI: 5
Jan 18 09:31:19 lynx kernel: [    1.936967] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 18 09:31:19 lynx kernel: [    1.938960] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
Jan 18 09:31:19 lynx kernel: [    1.941161] sd 0:0:0:0: [sda] Write Protect is off
Jan 18 09:31:19 lynx kernel: [    1.941179] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 18 09:31:19 lynx kernel: [    1.942006] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 18 09:31:19 lynx kernel: [    1.957429]  sda: sda1 sda2 < sda5 >
Jan 18 09:31:19 lynx kernel: [    2.139646] sd 0:0:0:0: [sda] Attached SCSI disk
Jan 18 09:31:19 lynx kernel: [    2.278792] Freeing initrd memory: 8730k freed
Jan 18 09:31:19 lynx kernel: [    2.301075] Freeing unused kernel memory: 660k freed
Jan 18 09:31:19 lynx kernel: [    2.305039] Write protecting the kernel text: 4860k
Jan 18 09:31:19 lynx kernel: [    2.305200] Write protecting the kernel read-only data: 1936k
Jan 18 09:31:19 lynx kernel: [    2.840546] udev: starting version 149
Jan 18 09:31:19 lynx kernel: [    5.878312] Linux agpgart interface v0.103
Jan 18 09:31:19 lynx kernel: [    6.120473] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 18 09:31:19 lynx kernel: [    6.121235] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
Jan 18 09:31:19 lynx kernel: [    6.224447] agpgart: Detected Transmeta Efficeon TM8000 series chipset
Jan 18 09:31:19 lynx kernel: [    6.224512] agpgart-efficeon 0000:00:00.0: enabling device (0100 -> 0102)
Jan 18 09:31:19 lynx kernel: [    6.224576] agpgart: efficeon_create_gatt_table(16384)
Jan 18 09:31:19 lynx kernel: [    6.225237] agpgart: efficeon_configure()
Jan 18 09:31:19 lynx kernel: [    6.228149] agpgart-efficeon 0000:00:00.0: AGP aperture is 64M @ 0xec000000
Jan 18 09:31:19 lynx kernel: [    6.488295] 8139too Fast Ethernet driver 0.9.28
Jan 18 09:31:19 lynx kernel: [    6.489541] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
Jan 18 09:31:19 lynx kernel: [    6.489565] PCI: setting IRQ 3 as level-triggered
Jan 18 09:31:19 lynx kernel: [    6.489590] 8139too 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3
Jan 18 09:31:19 lynx kernel: [    6.574957] eth0: RealTek RTL8139 at 0x1400, 08:00:1f:1c:73:ed, IRQ 3
Jan 18 09:31:19 lynx kernel: [    7.007956] [drm] Initialized drm 1.1.0 20060810
Jan 18 09:31:19 lynx kernel: [    7.259842] [drm] radeon defaulting to kernel modesetting.
Jan 18 09:31:19 lynx kernel: [    7.259865] [drm] radeon kernel modesetting enabled.
Jan 18 09:31:19 lynx kernel: [    7.261140] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Jan 18 09:31:19 lynx kernel: [    7.261163] PCI: setting IRQ 10 as level-triggered
Jan 18 09:31:19 lynx kernel: [    7.261187] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
Jan 18 09:31:19 lynx kernel: [    7.269353] [drm] radeon: Initializing kernel modesetting.
Jan 18 09:31:19 lynx kernel: [    7.269752] [drm] register mmio base: 0xE8100000
Jan 18 09:31:19 lynx kernel: [    7.269765] [drm] register mmio size: 65536
Jan 18 09:31:19 lynx kernel: [    7.270736] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Jan 18 09:31:19 lynx kernel: [    7.271422] agpgart-efficeon 0000:00:00.0: AGP 2.0 bridge
Jan 18 09:31:19 lynx kernel: [    7.271526] agpgart-efficeon 0000:00:00.0: putting AGP V2 device into 2x mode
Jan 18 09:31:20 lynx kernel: [    7.271679] radeon 0000:01:00.0: putting AGP V2 device into 2x mode
Jan 18 09:31:20 lynx kernel: [    7.271712] [drm] radeon: VRAM 64M
Jan 18 09:31:20 lynx kernel: [    7.271722] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
Jan 18 09:31:20 lynx kernel: [    7.271733] [drm] radeon: GTT 64M
Jan 18 09:31:20 lynx kernel: [    7.271742] [drm] radeon: GTT from 0xEC000000 to 0xEFFFFFFF
Jan 18 09:31:20 lynx kernel: [    7.272141] [drm] radeon: irq initialized.
Jan 18 09:31:20 lynx kernel: [    7.273400] [drm] Detected VRAM RAM=64M, BAR=128M
Jan 18 09:31:20 lynx kernel: [    7.273418] [drm] RAM width 32bits DDR
Jan 18 09:31:20 lynx kernel: [    7.274276] [TTM] Zone  kernel: Available graphics memory: 241820 kiB.
Jan 18 09:31:20 lynx kernel: [    7.274642] [drm] radeon: 16M of VRAM memory ready
Jan 18 09:31:20 lynx kernel: [    7.274664] [drm] radeon: 64M of GTT memory ready.
Jan 18 09:31:20 lynx kernel: [    7.285186] [drm] radeon: cp idle (0x00008080)
Jan 18 09:31:20 lynx kernel: [    7.285390] [drm] Loading R100 Microcode
Jan 18 09:31:20 lynx kernel: [    7.286321] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
Jan 18 09:31:20 lynx kernel: [    7.449183] agpgart: efficeon_insert_memory(0, 256)
Jan 18 09:31:20 lynx kernel: [    7.449202] [TTM] AGP Bind memory failed.
Jan 18 09:31:20 lynx kernel: [    7.449210] [TTM] Couldn't bind backend.
Jan 18 09:31:20 lynx kernel: [    7.449239] [TTM] Failed moving buffer. Proposed placement 0x00070002
Jan 18 09:31:20 lynx kernel: [    7.453967] [drm:radeon_object_create] *ERROR* Failed to allocate TTM object (1048576, 0x00070002, 0)
Jan 18 09:31:20 lynx kernel: [    7.453996] [drm:radeon_ring_init] *ERROR* radeon: failed to create ring buffer (-22).
Jan 18 09:31:20 lynx kernel: [    7.454020] radeon 0000:01:00.0: failled initializing CP (-22).
Jan 18 09:31:20 lynx kernel: [    7.454032] radeon 0000:01:00.0: Disabling GPU acceleration
Jan 18 09:31:20 lynx kernel: [    7.456972] [drm] radeon: cp finalized
Jan 18 09:31:20 lynx kernel: [    7.457311] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Jan 18 09:31:20 lynx kernel: [    7.458335] [drm] radeon: cp finalized
Jan 18 09:31:20 lynx kernel: [    7.458362] [drm] radeon: fence finalized
Jan 18 09:31:20 lynx kernel: [    7.458765] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
Jan 18 09:31:20 lynx kernel: [    7.458795] [drm] radeon: ttm finalized
Jan 18 09:31:20 lynx kernel: [    7.458835] [drm] Forcing AGP to PCI mode
Jan 18 09:31:20 lynx kernel: [    7.459902] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Jan 18 09:31:20 lynx kernel: [    7.459976] [drm] radeon: VRAM 64M
Jan 18 09:31:20 lynx kernel: [    7.459984] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
Jan 18 09:31:20 lynx kernel: [    7.459993] [drm] radeon: GTT 64M
Jan 18 09:31:20 lynx kernel: [    7.460000] [drm] radeon: GTT from 0x04000000 to 0x07FFFFFF
Jan 18 09:31:20 lynx kernel: [    7.461696] [drm] radeon: irq initialized.
Jan 18 09:31:20 lynx kernel: [    7.461783] [drm] Detected VRAM RAM=64M, BAR=128M
Jan 18 09:31:20 lynx kernel: [    7.461795] [drm] RAM width 32bits DDR
Jan 18 09:31:20 lynx kernel: [    7.462063] [TTM] Zone  kernel: Available graphics memory: 241820 kiB.
Jan 18 09:31:20 lynx kernel: [    7.462272] [drm] radeon: 16M of VRAM memory ready
Jan 18 09:31:20 lynx kernel: [    7.462291] [drm] radeon: 64M of GTT memory ready.
Jan 18 09:31:20 lynx kernel: [    7.462312] [drm] GART: num cpu pages 16384, num gpu pages 16384
Jan 18 09:31:20 lynx kernel: [    7.473133] [drm] radeon: cp idle (0x00008080)
Jan 18 09:31:20 lynx kernel: [    7.475038] [drm] radeon: ring at 0x0000000004000000
Jan 18 09:31:20 lynx kernel: [    7.475694] [drm] ring test succeeded in 0 usecs
Jan 18 09:31:20 lynx kernel: [    7.476500] [drm] radeon: ib pool ready.
Jan 18 09:31:20 lynx kernel: [    7.476998] [drm] ib test succeeded in 0 usecs
Jan 18 09:31:20 lynx kernel: [    7.479445] [drm] Panel ID String: 1024x768                
Jan 18 09:31:20 lynx kernel: [    7.479462] [drm] Panel Size 1024x768
Jan 18 09:31:20 lynx kernel: [    7.479833] [drm] Radeon Display Connectors
Jan 18 09:31:20 lynx kernel: [    7.479844] [drm] Connector 0:
Jan 18 09:31:20 lynx kernel: [    7.479852] [drm]   VGA
Jan 18 09:31:20 lynx kernel: [    7.479863] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
Jan 18 09:31:20 lynx kernel: [    7.479870] [drm]   Encoders:
Jan 18 09:31:20 lynx kernel: [    7.479878] [drm]     CRT1: INTERNAL_DAC1
Jan 18 09:31:20 lynx kernel: [    7.479889] [drm] Connector 1:
Jan 18 09:31:20 lynx kernel: [    7.479894] [drm]   LVDS
Jan 18 09:31:20 lynx kernel: [    7.479899] [drm]   Encoders:
Jan 18 09:31:20 lynx kernel: [    7.479907] [drm]     LCD1: INTERNAL_LVDS
Jan 18 09:31:20 lynx kernel: [    7.532777] [drm] fb mappable at 0xF0040000
Jan 18 09:31:20 lynx kernel: [    7.532792] [drm] vram apper at 0xF0000000
Jan 18 09:31:20 lynx kernel: [    7.532799] [drm] size 3145728
Jan 18 09:31:20 lynx kernel: [    7.532806] [drm] fb depth is 24
Jan 18 09:31:20 lynx kernel: [    7.532817] [drm]    pitch is 4096
Jan 18 09:31:20 lynx kernel: [    7.534581] fb0: radeondrmfb frame buffer device
Jan 18 09:31:20 lynx kernel: [    7.534593] registered panic notifier
Jan 18 09:31:20 lynx kernel: [    7.534645] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
Jan 18 09:31:20 lynx kernel: [    7.548195] vga16fb: initializing
Jan 18 09:31:20 lynx kernel: [    7.548229] vga16fb: mapped to 0xc00a0000
Jan 18 09:31:20 lynx kernel: [    7.548923] fb1: VGA16 VGA frame buffer device
Jan 18 09:31:20 lynx kernel: [    7.718575] [drm] LVDS-11: set mode 1024x768 13
Jan 18 09:31:20 lynx kernel: [    7.821946] Console: switching to colour frame buffer device 128x48
Jan 18 09:31:20 lynx kernel: [    9.938136] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
Jan 18 09:31:20 lynx kernel: [    9.938184] EXT4-fs (sda1): write access will be enabled during recovery
Jan 18 09:31:20 lynx kernel: [   16.289201] EXT4-fs (sda1): orphan cleanup on readonly fs
Jan 18 09:31:20 lynx kernel: [   16.290029] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 392503
Jan 18 09:31:20 lynx kernel: [   16.293214] EXT4-fs (sda1): 1 orphan inode deleted
Jan 18 09:31:20 lynx kernel: [   16.293247] EXT4-fs (sda1): recovery complete
Jan 18 09:31:20 lynx kernel: [   16.449867] EXT4-fs (sda1): mounted filesystem with ordered data mode
Jan 18 09:31:20 lynx kernel: [   24.687878] Adding 859436k swap on /dev/sda5.  Priority:-1 extents:1 across:859436k 
Jan 18 09:31:20 lynx kernel: [   25.494113] udev: starting version 149
Jan 18 09:31:20 lynx kernel: [   28.605898] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
Jan 18 09:31:20 lynx kernel: [   28.605932] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
Jan 18 09:31:20 lynx kernel: [   28.606460] ali1563_smbus 0000:00:03.0: Could not allocate I/O space at 0x8080
Jan 18 09:31:20 lynx kernel: [   28.606507] ali1563_smbus 0000:00:03.0: ALi1563 SMBus probe failed (-19)
Jan 18 09:31:20 lynx kernel: [   28.618344] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 18 09:31:20 lynx kernel: [   29.893551] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
Jan 18 09:31:20 lynx kernel: [   29.893854] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
Jan 18 09:31:20 lynx kernel: [   29.981222] cfg80211: Calling CRDA to update world regulatory domain
Jan 18 09:31:20 lynx kernel: [   30.290868] yenta_cardbus 0000:00:09.0: CardBus bridge found [13bd:103b]
Jan 18 09:31:20 lynx kernel: [   30.493332] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0090, PCI irq 9
Jan 18 09:31:20 lynx kernel: [   30.493355] yenta_cardbus 0000:00:09.0: Socket status: 30000820
Jan 18 09:31:20 lynx kernel: [   30.840616] lp: driver loaded but no devices found
Jan 18 09:31:20 lynx kernel: [   31.188202] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
Jan 18 09:31:20 lynx kernel: [   31.188476] pci 0000:03:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
Jan 18 09:31:20 lynx kernel: [   31.856307] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa24cb1, caps: 0x804713/0x0
Jan 18 09:31:20 lynx kernel: [   32.071392] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
Jan 18 09:31:20 lynx kernel: [   32.121259] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
Jan 18 09:31:20 lynx kernel: [   32.121300] PCI: setting IRQ 4 as level-triggered
Jan 18 09:31:20 lynx kernel: [   32.121335] p54pci 0000:00:06.0: PCI INT A -> Link[LNKD] -> GSI 4 (level, low) -> IRQ 4
Jan 18 09:31:20 lynx kernel: [   32.121915] p54pci 0000:00:06.0: firmware: requesting isl3886pci
Jan 18 09:31:20 lynx kernel: [   32.811275] cfg80211: World regulatory domain updated:
Jan 18 09:31:20 lynx kernel: [   32.811299] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 18 09:31:20 lynx kernel: [   32.811316] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 18 09:31:20 lynx kernel: [   32.811330] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 18 09:31:20 lynx kernel: [   32.811342] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 18 09:31:20 lynx kernel: [   32.811354] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 18 09:31:20 lynx kernel: [   32.811366] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 18 09:31:20 lynx kernel: [   32.847198] ath5k 0000:03:00.0: enabling device (0000 -> 0002)
Jan 18 09:31:20 lynx kernel: [   32.847292] ath5k 0000:03:00.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
Jan 18 09:31:20 lynx kernel: [   32.847663] ath5k 0000:03:00.0: registered as 'phy1'
Jan 18 09:31:20 lynx kernel: [   33.526335] p54pci 0000:00:06.0: Cannot find firmware (isl3886pci)
Jan 18 09:31:20 lynx kernel: [   33.526399] p54pci 0000:00:06.0: firmware: requesting isl3886
Jan 18 09:31:20 lynx kernel: [   33.576578] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
Jan 18 09:31:20 lynx kernel: [   33.614892] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
Jan 18 09:31:20 lynx kernel: [   33.651842] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
Jan 18 09:31:20 lynx kernel: [   33.663253] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
Jan 18 09:31:20 lynx kernel: [   33.730388] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Jan 18 09:31:20 lynx kernel: [   34.088002] p54pci 0000:00:06.0: PCI INT A disabled
Jan 18 09:31:20 lynx kernel: [   34.089945] p54pci: probe of 0000:00:06.0 failed with error -2
Jan 18 09:31:20 lynx kernel: [   35.748831] type=1505 audit(1263835873.643:2):  operation="profile_load" pid=829 name="/sbin/dhclient3"
Jan 18 09:31:20 lynx kernel: [   35.786400] type=1505 audit(1263835873.679:3):  operation="profile_load" pid=829 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Jan 18 09:31:20 lynx kernel: [   35.802106] type=1505 audit(1263835873.695:4):  operation="profile_load" pid=829 name="/usr/lib/connman/scripts/dhclient-script"
Jan 18 09:31:20 lynx kernel: [   37.000177] ath: EEPROM regdomain: 0x10
Jan 18 09:31:20 lynx kernel: [   37.000199] ath: EEPROM indicates we should expect a direct regpair map
Jan 18 09:31:20 lynx kernel: [   37.000235] ath: Country alpha2 being used: CO
Jan 18 09:31:20 lynx kernel: [   37.000243] ath: Regpair used: 0x10
Jan 18 09:31:20 lynx kernel: [   38.026859] phy1: Selected rate control algorithm 'minstrel'
Jan 18 09:31:20 lynx kernel: [   38.030466] ath5k phy1: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
Jan 18 09:31:20 lynx kernel: [   38.031423] cfg80211: Calling CRDA for country: CO
Jan 18 09:31:20 lynx kernel: [   38.390334] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
Jan 18 09:31:20 lynx kernel: [   38.390378] Intel ICH 0000:00:04.0: PCI INT A -> Link[LNKG] -> GSI 9 (level, low) -> IRQ 9
Jan 18 09:31:20 lynx kernel: [   38.476093] cfg80211: Regulatory domain changed to country: CO
Jan 18 09:31:20 lynx kernel: [   38.476115] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 18 09:31:20 lynx kernel: [   38.476131] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 18 09:31:20 lynx kernel: [   38.476143] 	(5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
Jan 18 09:31:20 lynx kernel: [   38.476155] 	(5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
Jan 18 09:31:20 lynx kernel: [   38.476167] 	(5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
Jan 18 09:31:20 lynx kernel: [   38.532384] intel8x0_measure_ac97_clock: measured 52484 usecs (2528 samples)
Jan 18 09:31:20 lynx kernel: [   38.532408] intel8x0: clocking to 48000
Jan 18 09:31:21 lynx NetworkManager: <info>  starting...
Jan 18 09:31:22 lynx NetworkManager: <info>  Trying to start the modem-manager...
Jan 18 09:31:22 lynx NetworkManager:    SCPlugin-Ifupdown: init!
Jan 18 09:31:22 lynx NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Jan 18 09:31:22 lynx NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Jan 18 09:31:22 lynx NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:09.0/0000:03:00.0/net/wlan0, iface: wlan0)
Jan 18 09:31:22 lynx NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:09.0/0000:03:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Jan 18 09:31:22 lynx NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:0a.0/net/eth0, iface: eth0)
Jan 18 09:31:22 lynx NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:0a.0/net/eth0, iface: eth0): no ifupdown configuration found.
Jan 18 09:31:22 lynx NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Jan 18 09:31:22 lynx NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Jan 18 09:31:22 lynx NetworkManager:    SCPlugin-Ifupdown: end _init.
Jan 18 09:31:22 lynx NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Jan 18 09:31:22 lynx NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Jan 18 09:31:22 lynx NetworkManager: <info>  Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:09.0/0000:03:00.0/ieee80211/phy1/rfkill0) (driver <unknown>)
Jan 18 09:31:23 lynx NetworkManager: <info>  Wireless now enabled by radio killswitch
Jan 18 09:31:23 lynx NetworkManager:    SCPlugin-Ifupdown: (135136864) ... get_connections.
Jan 18 09:31:23 lynx NetworkManager:    SCPlugin-Ifupdown: (135136864) ... get_connections (managed=false): return empty list.
Jan 18 09:31:23 lynx NetworkManager:    Ifupdown: get unmanaged devices count: 0
Jan 18 09:31:23 lynx modem-manager: Loaded plugin Nokia
Jan 18 09:31:23 lynx NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 18 09:31:23 lynx NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Jan 18 09:31:23 lynx modem-manager: Loaded plugin Option
Jan 18 09:31:23 lynx NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0
Jan 18 09:31:23 lynx NetworkManager: <info>  (wlan0): now managed
Jan 18 09:31:23 lynx NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Jan 18 09:31:23 lynx NetworkManager: <info>  (wlan0): bringing up device.
Jan 18 09:31:23 lynx modem-manager: Loaded plugin Generic
Jan 18 09:31:23 lynx modem-manager: Loaded plugin Novatel
Jan 18 09:31:23 lynx modem-manager: Loaded plugin Huawei
Jan 18 09:31:23 lynx modem-manager: Loaded plugin Ericsson MBM
Jan 18 09:31:23 lynx modem-manager: Loaded plugin Option High-Speed
Jan 18 09:31:23 lynx modem-manager: Loaded plugin ZTE
Jan 18 09:31:23 lynx modem-manager: Loaded plugin MotoC
Jan 18 09:31:23 lynx modem-manager: Loaded plugin Gobi
Jan 18 09:31:23 lynx modem-manager: Loaded plugin Sierra
Jan 18 09:31:24 lynx kernel: [   46.489841] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 18 09:31:24 lynx NetworkManager: <info>  (wlan0): preparing device.
Jan 18 09:31:24 lynx NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Jan 18 09:31:24 lynx NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Jan 18 09:31:24 lynx NetworkManager: <info>  (eth0): carrier is OFF
Jan 18 09:31:24 lynx NetworkManager: <info>  (eth0): new Ethernet device (driver: '8139too')
Jan 18 09:31:24 lynx NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/1
Jan 18 09:31:24 lynx NetworkManager: <info>  (eth0): now managed
Jan 18 09:31:24 lynx NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Jan 18 09:31:24 lynx NetworkManager: <info>  (eth0): bringing up device.
Jan 18 09:31:24 lynx kernel: [   46.696431] eth0: link down
Jan 18 09:31:24 lynx NetworkManager: <info>  (eth0): preparing device.
Jan 18 09:31:24 lynx kernel: [   46.701074] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 18 09:31:24 lynx NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Jan 18 09:31:24 lynx NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:0a.0/net/eth0
Jan 18 09:31:25 lynx NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Jan 18 09:31:25 lynx NetworkManager: <info>  modem-manager is now available
Jan 18 09:31:25 lynx NetworkManager: <info>  Trying to start the supplicant...
Jan 18 09:31:25 lynx kernel: [   47.784756] type=1505 audit(1263835885.679:5):  operation="profile_load" pid=1048 name="/usr/share/gdm/guest-session/Xsession"
Jan 18 09:31:25 lynx kernel: [   47.909987] type=1505 audit(1263835885.803:6):  operation="profile_replace" pid=1049 name="/sbin/dhclient3"
Jan 18 09:31:25 lynx kernel: [   47.911730] type=1505 audit(1263835885.803:7):  operation="profile_replace" pid=1049 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Jan 18 09:31:25 lynx kernel: [   47.920966] type=1505 audit(1263835885.815:8):  operation="profile_replace" pid=1049 name="/usr/lib/connman/scripts/dhclient-script"
Jan 18 09:31:26 lynx kernel: [   48.340968] type=1505 audit(1263835886.235:9):  operation="profile_load" pid=1050 name="/usr/bin/evince"
Jan 18 09:31:26 lynx kernel: [   48.355674] type=1505 audit(1263835886.247:10):  operation="profile_load" pid=1050 name="/usr/bin/evince-previewer"
Jan 18 09:31:26 lynx kernel: [   48.373464] type=1505 audit(1263835886.267:11):  operation="profile_load" pid=1050 name="/usr/bin/evince-thumbnailer"
Jan 18 09:31:26 lynx NetworkManager: <info>  (wlan0): supplicant manager state:  down -> idle
Jan 18 09:31:26 lynx NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 0)
Jan 18 09:31:26 lynx kernel: [   48.743924] type=1505 audit(1263835886.635:12):  operation="profile_load" pid=1053 name="/usr/lib/cups/backend/cups-pdf"
Jan 18 09:31:26 lynx kernel: [   48.747756] type=1505 audit(1263835886.639:13):  operation="profile_load" pid=1053 name="/usr/sbin/cupsd"
Jan 18 09:31:26 lynx kernel: [   48.945829] type=1505 audit(1263835886.839:14):  operation="profile_load" pid=1056 name="/usr/sbin/tcpdump"
Jan 18 09:31:26 lynx NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
Jan 18 09:31:36 lynx kernel: [   58.376221] ppdev: user-space parallel port driver
Jan 18 09:33:33 lynx NetworkManager: <info>  Activation (wlan0) starting connection 'Auto Waves Wireless - Framework N1'
Jan 18 09:33:33 lynx NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
Jan 18 09:33:33 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 18 09:33:33 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 18 09:33:33 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 18 09:33:33 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 18 09:33:33 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 18 09:33:33 lynx NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Jan 18 09:33:33 lynx NetworkManager: <info>  Activation (wlan0/wireless): access point 'Auto Waves Wireless - Framework N1' has security, but secrets are required.
Jan 18 09:33:33 lynx NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
Jan 18 09:33:33 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 18 09:33:35 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 18 09:33:35 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 18 09:33:35 lynx NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
Jan 18 09:33:35 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 18 09:33:35 lynx NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 18 09:33:35 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 18 09:33:35 lynx NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Jan 18 09:33:35 lynx NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto Waves Wireless - Framework N1' has security, and secrets exist.  No new secrets needed.
Jan 18 09:33:35 lynx NetworkManager: <info>  Config: added 'ssid' value 'Waves Wireless - Framework N1'
Jan 18 09:33:35 lynx NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Jan 18 09:33:35 lynx NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Jan 18 09:33:35 lynx NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Jan 18 09:33:35 lynx NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Jan 18 09:33:35 lynx NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Jan 18 09:33:35 lynx NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 18 09:33:36 lynx NetworkManager: <info>  Config: set interface ap_scan to 1
Jan 18 09:33:36 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  inactive -> scanning
Jan 18 09:33:38 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> associating
Jan 18 09:33:38 lynx kernel: [  181.002062] wlan0: direct probe to AP 00:1d:6a:bf:3c:b1 (try 1)
Jan 18 09:33:38 lynx kernel: [  181.003671] wlan0: deauthenticating from 00:1d:6a:bf:3c:b1 by local choice (reason=3)
Jan 18 09:33:38 lynx kernel: [  181.009847] wlan0: direct probe to AP 00:1d:6a:bf:3c:b1 (try 1)
Jan 18 09:33:38 lynx kernel: [  181.014857] wlan0: direct probe responded
Jan 18 09:33:38 lynx kernel: [  181.014947] wlan0: authenticate with AP 00:1d:6a:bf:3c:b1 (try 1)
Jan 18 09:33:38 lynx kernel: [  181.017085] wlan0: authenticated
Jan 18 09:33:38 lynx kernel: [  181.017957] wlan0: associate with AP 00:1d:6a:bf:3c:b1 (try 1)
Jan 18 09:33:38 lynx kernel: [  181.020691] wlan0: RX AssocResp from 00:1d:6a:bf:3c:b1 (capab=0x31 status=0 aid=5)
Jan 18 09:33:38 lynx kernel: [  181.020755] wlan0: associated
Jan 18 09:33:38 lynx kernel: [  181.025748] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 18 09:33:40 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  associating -> associated
Jan 18 09:33:40 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  associated -> 4-way handshake
Jan 18 09:33:40 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  4-way handshake -> group handshake
Jan 18 09:33:40 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
Jan 18 09:33:40 lynx NetworkManager: <info>  Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Waves Wireless - Framework N1'.
Jan 18 09:33:40 lynx NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 18 09:33:40 lynx NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 18 09:33:40 lynx NetworkManager: <info>  (wlan0): device state change: 5 -> 7 (reason 0)
Jan 18 09:33:40 lynx NetworkManager: <info>  Activation (wlan0) Beginning DHCP transaction (timeout in 45 seconds)
Jan 18 09:33:40 lynx NetworkManager: <info>  dhclient started with pid 1630
Jan 18 09:33:40 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) scheduled...
Jan 18 09:33:40 lynx NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 18 09:33:40 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) started...
Jan 18 09:33:40 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) complete.
Jan 18 09:33:40 lynx dhclient: Internet Systems Consortium DHCP Client V3.1.3
Jan 18 09:33:40 lynx dhclient: Copyright 2004-2009 Internet Systems Consortium.
Jan 18 09:33:40 lynx dhclient: All rights reserved.
Jan 18 09:33:40 lynx dhclient: For info, please visit https://www.isc.org/software/dhcp/
Jan 18 09:33:40 lynx dhclient: 
Jan 18 09:33:42 lynx NetworkManager: <info>  DHCP: device wlan0 state changed (null) -> preinit
Jan 18 09:33:42 lynx dhclient: Listening on LPF/wlan0/00:19:5b:44:60:94
Jan 18 09:33:42 lynx dhclient: Sending on   LPF/wlan0/00:19:5b:44:60:94
Jan 18 09:33:42 lynx dhclient: Sending on   Socket/fallback
Jan 18 09:33:46 lynx dhclient: DHCPREQUEST of 192.168.1.102 on wlan0 to 255.255.255.255 port 67
Jan 18 09:33:46 lynx dhclient: DHCPACK of 192.168.1.102 from 192.168.1.1
Jan 18 09:33:46 lynx NetworkManager: <info>  DHCP: device wlan0 state changed preinit -> reboot
Jan 18 09:33:46 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 18 09:33:46 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 18 09:33:46 lynx dhclient: bound to 192.168.1.102 -- renewal in 816 seconds.
Jan 18 09:33:46 lynx NetworkManager: <info>    address 192.168.1.102
Jan 18 09:33:46 lynx NetworkManager: <info>    prefix 24 (255.255.255.0)
Jan 18 09:33:46 lynx NetworkManager: <info>    gateway 192.168.1.1
Jan 18 09:33:46 lynx NetworkManager: <info>    nameserver '192.168.1.1'
Jan 18 09:33:46 lynx NetworkManager: <info>    domain name 'vc.shawcable.net'
Jan 18 09:33:46 lynx NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 18 09:33:46 lynx NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 18 09:33:46 lynx NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 18 09:33:48 lynx NetworkManager: <info>  (wlan0): device state change: 7 -> 8 (reason 0)
Jan 18 09:33:48 lynx NetworkManager: <info>  Policy set 'Auto Waves Wireless - Framework N1' (wlan0) as default for routing and DNS.
Jan 18 09:33:48 lynx NetworkManager: <info>  Activation (wlan0) successful, device activated.
Jan 18 09:33:48 lynx NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 18 09:33:49 lynx kernel: [  191.320161] wlan0: no IPv6 routers present
Jan 18 09:36:12 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  completed -> group handshake
Jan 18 09:36:12 lynx NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
Jan 18 09:42:30 lynx kernel: [  712.385186] ath5k phy1: noise floor calibration timeout (2417MHz)
Jan 18 09:46:31 lynx kernel: [  953.257781] [TTM] Failed moving buffer. Proposed placement 0x00060004
Jan 18 09:46:31 lynx kernel: [  953.259526] [drm:radeon_object_list_validate] *ERROR* radeon: failed to validate.
Jan 18 09:46:31 lynx kernel: [  953.259859] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation !
Jan 18 09:47:22 lynx dhclient: DHCPREQUEST of 192.168.1.102 on wlan0 to 192.168.1.1 port 67
Jan 18 09:47:22 lynx dhclient: DHCPACK of 192.168.1.102 from 192.168.1.1
Jan 18 09:47:23 lynx dhclient: bound to 192.168.1.102 -- renewal in 788 seconds.
Jan 18 09:47:23 lynx NetworkManager: <info>  DHCP: device wlan0 state changed reboot -> renew
Jan 18 09:47:23 lynx NetworkManager: <info>    address 192.168.1.102
Jan 18 09:47:23 lynx NetworkManager: <info>    prefix 24 (255.255.255.0)
Jan 18 09:47:23 lynx NetworkManager: <info>    gateway 192.168.1.1
Jan 18 09:47:23 lynx NetworkManager: <info>    nameserver '192.168.1.1'
Jan 18 09:47:23 lynx NetworkManager: <info>    domain name 'vc.shawcable.net'
Jan 18 09:49:39 lynx kernel: [ 1141.392778] [drm:radeon_object_busy_domain] *ERROR* radeon: failed to reserve object for waiting.