[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Aug 12 13:37:22 UTC 2008 (Ubuntu 2.6.24-21.40-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe84c00 (usable) [ 0.000000] BIOS-e820: 00000000dfe84c00 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] Warning only 4GB will be used. [ 0.000000] Use a HIGHMEM64G enabled kernel. [ 0.000000] 3200MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 1048576 [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 6400 pages used for memmap [ 0.000000] HighMem zone: 812800 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FBB50 checksum 0 [ 0.000000] ACPI: RSDP 000FBB50, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT DFE86600, 0064 (r1 DELL M08 27D8010B ASL 61) [ 0.000000] ACPI: FACP DFE8649C, 00F4 (r4 DELL M08 27D8010B ASL 61) [ 0.000000] ACPI: DSDT DFE86C00, 5718 (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS DFE95400, 0040 [ 0.000000] ACPI: HPET DFE86700, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC DFE86800, 0068 (r1 DELL M08 27D8010B ASL 47) [ 0.000000] ACPI: ASF! DFE86400, 007E (r32 DELL M08 27D8010B ASL 61) [ 0.000000] ACPI: MCFG DFE867C0, 003E (r16 DELL M08 27D8010B ASL 61) [ 0.000000] ACPI: TCPA DFE86B00, 0032 (r1 0 ASL 0) [ 0.000000] ACPI: SLIC DFE8689C, 0176 (r1 DELL M08 27D8010B ASL 61) [ 0.000000] ACPI: SSDT DFE84D7E, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:14000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 [ 0.000000] Kernel command line: root=UUID=49314064-83df-4094-b660-e182efe0a9cd ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2394.078 MHz processor. [ 21.231623] Console: colour VGA+ 80x25 [ 21.231626] console [tty0] enabled [ 21.231905] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 21.232154] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 21.388416] Memory: 3622132k/4194304k available (2177k kernel code, 45124k reserved, 1006k data, 368k init, 2750992k highmem) [ 21.388422] virtual kernel memory layout: [ 21.388422] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 21.388423] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 21.388424] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 21.388425] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 21.388425] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 21.388426] .data : 0xc0320504 - 0xc041bdc4 (1006 kB) [ 21.388427] .text : 0xc0100000 - 0xc0320504 (2177 kB) [ 21.388429] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 21.388463] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 21.388575] hpet clockevent registered [ 21.472437] Calibrating delay using timer specific routine.. 4793.25 BogoMIPS (lpj=9586507) [ 21.472455] Security Framework initialized [ 21.472460] SELinux: Disabled at boot. [ 21.472471] AppArmor: AppArmor initialized [ 21.472474] Failure registering capabilities with primary security module. [ 21.472480] Mount-cache hash table entries: 512 [ 21.472581] Initializing cgroup subsys ns [ 21.472585] Initializing cgroup subsys cpuacct [ 21.472593] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 [ 21.472598] monitor/mwait feature present. [ 21.472599] using mwait in idle threads. [ 21.472603] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.472604] CPU: L2 cache: 4096K [ 21.472606] CPU: Physical Processor ID: 0 [ 21.472607] CPU: Processor Core ID: 0 [ 21.472609] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e3bd 00000000 00000001 00000001 [ 21.472616] Compat vDSO mapped to ffffe000. [ 21.472626] Checking 'hlt' instruction... OK. [ 21.488707] SMP alternatives: switching to UP code [ 21.489926] Early unpacking initramfs... done [ 21.730265] ACPI: Core revision 20070126 [ 21.730298] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.733631] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0a [ 21.733643] SMP alternatives: switching to SMP code [ 21.734169] Booting processor 1/1 eip 3000 [ 21.744509] Initializing CPU#1 [ 21.823824] Calibrating delay using timer specific routine.. 4787.98 BogoMIPS (lpj=9575973) [ 21.823829] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 [ 21.823833] monitor/mwait feature present. [ 21.823835] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.823836] CPU: L2 cache: 4096K [ 21.823838] CPU: Physical Processor ID: 0 [ 21.823839] CPU: Processor Core ID: 1 [ 21.823840] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e3bd 00000000 00000001 00000001 [ 21.824455] CPU1: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0a [ 21.824473] Total of 2 processors activated (9581.24 BogoMIPS). [ 21.824668] ENABLING IO-APIC IRQs [ 21.824851] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 21.971659] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 21.991636] Brought up 2 CPUs [ 21.991655] CPU0 attaching sched-domain: [ 21.991657] domain 0: span 03 [ 21.991658] groups: 01 02 [ 21.991660] CPU1 attaching sched-domain: [ 21.991662] domain 0: span 03 [ 21.991663] groups: 02 01 [ 21.991819] net_namespace: 64 bytes [ 21.991828] Booting paravirtualized kernel on bare hardware [ 21.992166] Time: 11:31:50 Date: 08/15/08 [ 21.992187] NET: Registered protocol family 16 [ 21.992316] EISA bus registered [ 21.992319] ACPI: bus type pci registered [ 22.003048] PCI: PCI BIOS revision 2.10 entry at 0xfa986, last bus=14 [ 22.003049] PCI: Using configuration type 1 [ 22.003060] Setting up standard PCI resources [ 22.009316] ACPI: EC: Look up EC in DSDT [ 22.010033] ACPI: BIOS _OSI(Linux) query ignored [ 22.010035] ACPI: DMI System Vendor: Dell Inc. [ 22.010036] ACPI: DMI Product Name: Precision M6300 [ 22.010037] ACPI: DMI Product Version: [ 22.010038] ACPI: DMI Board Name: 0WY897 [ 22.010039] ACPI: DMI BIOS Vendor: Dell Inc. [ 22.010040] ACPI: DMI BIOS Date: 01/11/2008 [ 22.010041] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org [ 22.010042] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 22.049344] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - DC, should be 80 [20070126] [ 22.049349] ACPI: SSDT DFE95480, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 22.049470] ACPI: Interpreter enabled [ 22.049472] ACPI: (supports S0 S3 S4 S5) [ 22.049481] ACPI: Using IOAPIC for interrupt routing [ 22.099270] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.100187] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 22.100191] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 22.101558] PCI: Transparent bridge - 0000:00:1e.0 [ 22.101607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.101920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 22.102050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 22.102119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 22.102203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 22.102286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 22.102368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 22.121050] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 [ 22.121132] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 22.121213] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 22.121293] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 22.121373] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 22.121454] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 22.121536] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 22.121610] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 22.121711] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.121731] pnp: PnP ACPI init [ 22.121736] ACPI: bus type pnp registered [ 22.177368] pnpacpi: exceeded the max number of mem resources: 12 [ 22.177464] pnp: PnP ACPI: found 13 devices [ 22.177466] ACPI: ACPI bus type pnp unregistered [ 22.177468] PnPBIOS: Disabled by ACPI PNP [ 22.177612] PCI: Using ACPI for IRQ routing [ 22.177614] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.263072] NET: Registered protocol family 8 [ 22.263073] NET: Registered protocol family 20 [ 22.263096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 22.263099] hpet0: 3 64-bit timers, 14318180 Hz [ 22.264123] AppArmor: AppArmor Filesystem Enabled [ 22.267060] Time: tsc clocksource has been installed. [ 22.267066] Switched to high resolution mode on CPU 0 [ 22.267152] Switched to high resolution mode on CPU 1 [ 22.283016] system 00:05: ioport range 0xc80-0xcaf has been reserved [ 22.283018] system 00:05: ioport range 0xcc0-0xcff could not be reserved [ 22.283024] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 22.283028] system 00:0a: ioport range 0x900-0x97f has been reserved [ 22.283030] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 22.283032] system 00:0a: ioport range 0x1000-0x1005 has been reserved [ 22.283034] system 00:0a: ioport range 0x1008-0x100f has been reserved [ 22.283038] system 00:0b: ioport range 0xf400-0xf4fe has been reserved [ 22.283040] system 00:0b: ioport range 0x1006-0x1007 has been reserved [ 22.283042] system 00:0b: ioport range 0x100a-0x1059 could not be reserved [ 22.283044] system 00:0b: ioport range 0x1080-0x10bf has been reserved [ 22.283046] system 00:0b: ioport range 0x10c0-0x10df has been reserved [ 22.283047] system 00:0b: ioport range 0x1010-0x102f has been reserved [ 22.283049] system 00:0b: ioport range 0x809-0x809 has been reserved [ 22.283054] system 00:0c: iomem range 0x0-0x9efff could not be reserved [ 22.283056] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved [ 22.283058] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 22.283060] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 22.283062] system 00:0c: iomem range 0x100000-0xdfe84bff could not be reserved [ 22.283064] system 00:0c: iomem range 0xdfe84c00-0xdfefffff could not be reserved [ 22.283066] system 00:0c: iomem range 0xdff00000-0xdfffffff could not be reserved [ 22.283068] system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved [ 22.283070] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved [ 22.283072] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 22.283074] system 00:0c: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 22.283076] system 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 22.313326] PCI: Bridge: 0000:00:01.0 [ 22.313328] IO window: d000-dfff [ 22.313331] MEM window: fa000000-feafffff [ 22.313333] PREFETCH window: e0000000-efffffff [ 22.313336] PCI: Bridge: 0000:00:1c.0 [ 22.313337] IO window: disabled. [ 22.313342] MEM window: disabled. [ 22.313346] PREFETCH window: disabled. [ 22.313351] PCI: Bridge: 0000:00:1c.1 [ 22.313352] IO window: disabled. [ 22.313357] MEM window: f9f00000-f9ffffff [ 22.313361] PREFETCH window: disabled. [ 22.313366] PCI: Bridge: 0000:00:1c.3 [ 22.313369] IO window: c000-cfff [ 22.313374] MEM window: f9c00000-f9efffff [ 22.313378] PREFETCH window: f0000000-f01fffff [ 22.313383] PCI: Bridge: 0000:00:1c.5 [ 22.313384] IO window: disabled. [ 22.313389] MEM window: f9b00000-f9bfffff [ 22.313393] PREFETCH window: disabled. [ 22.313399] PCI: Bridge: 0000:00:1e.0 [ 22.313400] IO window: disabled. [ 22.313405] MEM window: f9a00000-f9afffff [ 22.313409] PREFETCH window: disabled. [ 22.313424] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 22.313427] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.313449] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 22.313454] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.313477] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 22.313482] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 22.313505] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 22.313510] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 22.313532] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 22.313536] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 22.313550] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 22.313557] NET: Registered protocol family 2 [ 22.350915] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 22.351070] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 22.351366] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 22.351515] TCP: Hash tables configured (established 131072 bind 65536) [ 22.351517] TCP reno registered [ 22.362940] checking if image is initramfs... it is [ 22.834558] Freeing initrd memory: 7331k freed [ 22.835105] audit: initializing netlink socket (disabled) [ 22.835116] audit(1218799910.301:1): initialized [ 22.835322] highmem bounce pool size: 64 pages [ 22.836667] VFS: Disk quotas dquot_6.5.1 [ 22.836719] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 22.836811] io scheduler noop registered [ 22.836813] io scheduler anticipatory registered [ 22.836814] io scheduler deadline registered [ 22.836822] io scheduler cfq registered (default) [ 22.836968] Boot video device is 0000:01:00.0 [ 22.837051] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.837082] assign_interrupt_mode Found MSI capability [ 22.837107] Allocate Port Service[0000:00:01.0:pcie00] [ 22.837133] Allocate Port Service[0000:00:01.0:pcie02] [ 22.837195] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.837252] assign_interrupt_mode Found MSI capability [ 22.837296] Allocate Port Service[0000:00:1c.0:pcie00] [ 22.837317] Allocate Port Service[0000:00:1c.0:pcie02] [ 22.837404] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 22.837461] assign_interrupt_mode Found MSI capability [ 22.837505] Allocate Port Service[0000:00:1c.1:pcie00] [ 22.837528] Allocate Port Service[0000:00:1c.1:pcie02] [ 22.837616] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 22.837673] assign_interrupt_mode Found MSI capability [ 22.837717] Allocate Port Service[0000:00:1c.3:pcie00] [ 22.837738] Allocate Port Service[0000:00:1c.3:pcie02] [ 22.837826] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 22.837882] assign_interrupt_mode Found MSI capability [ 22.837926] Allocate Port Service[0000:00:1c.5:pcie00] [ 22.837948] Allocate Port Service[0000:00:1c.5:pcie02] [ 22.838159] isapnp: Scanning for PnP cards... [ 23.191537] isapnp: No Plug & Play device found [ 23.208438] Real Time Clock Driver v1.12ac [ 23.208543] hpet_resources: 0xfed00000 is busy [ 23.208589] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 23.209417] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 23.209462] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 23.209533] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 23.212947] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.212950] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 23.233405] mice: PS/2 mouse device common for all mice [ 23.233478] EISA: Probing bus 0 at eisa.0 [ 23.233480] EISA: Cannot allocate resource for mainboard [ 23.233482] Cannot allocate resource for EISA slot 1 [ 23.233510] EISA: Detected 0 cards. [ 23.233512] cpuidle: using governor ladder [ 23.233514] cpuidle: using governor menu [ 23.233570] NET: Registered protocol family 1 [ 23.233590] Using IPI No-Shortcut mode [ 23.233611] registered taskstats version 1 [ 23.233714] Magic number: 4:781:529 [ 23.233757] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 23.233758] EDD information not available. [ 23.233926] Freeing unused kernel memory: 368k freed [ 23.236606] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 24.386842] fuse init (API version 7.9) [ 24.400447] ACPI: SSDT DFE858B4, 02C8 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 24.400591] ACPI: SSDT DFE8524A, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 24.401006] Monitor-Mwait will be used to enter C-1 state [ 24.401008] Monitor-Mwait will be used to enter C-2 state [ 24.401010] Monitor-Mwait will be used to enter C-3 state [ 24.401094] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 24.401097] ACPI: Processor [CPU0] (supports 8 throttling states) [ 24.401251] ACPI: SSDT DFE85B7C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 24.401383] ACPI: SSDT DFE8582F, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 24.401973] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 24.401977] ACPI: Processor [CPU1] (supports 8 throttling states) [ 24.410180] ACPI: Thermal Zone [THM] (55 C) [ 24.534109] usbcore: registered new interface driver usbfs [ 24.534125] usbcore: registered new interface driver hub [ 24.534336] usbcore: registered new device driver usb [ 24.535142] USB Universal Host Controller Interface driver v3.0 [ 24.535180] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 24.535189] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 24.535193] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 24.535362] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 24.535392] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20 [ 24.535482] usb usb1: configuration #1 chosen from 1 choice [ 24.535499] hub 1-0:1.0: USB hub found [ 24.535502] hub 1-0:1.0: 2 ports detected [ 24.638991] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 24.639000] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 24.639004] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 24.639020] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 24.639052] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00 [ 24.639133] usb usb2: configuration #1 chosen from 1 choice [ 24.639150] hub 2-0:1.0: USB hub found [ 24.639153] hub 2-0:1.0: 2 ports detected [ 24.723383] SCSI subsystem initialized [ 24.742809] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 24.742819] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 24.742823] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 24.742838] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 24.742865] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80 [ 24.742949] usb usb3: configuration #1 chosen from 1 choice [ 24.742965] hub 3-0:1.0: USB hub found [ 24.742969] hub 3-0:1.0: 2 ports detected [ 24.762435] libata version 3.00 loaded. [ 24.846637] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 24.846646] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 24.846650] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 24.846666] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 24.846693] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60 [ 24.846781] usb usb4: configuration #1 chosen from 1 choice [ 24.846798] hub 4-0:1.0: USB hub found [ 24.846801] hub 4-0:1.0: 2 ports detected [ 24.878500] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 24.950427] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 24.950436] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 24.950440] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 24.950454] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 24.950483] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40 [ 24.950570] usb usb5: configuration #1 chosen from 1 choice [ 24.950586] hub 5-0:1.0: USB hub found [ 24.950590] hub 5-0:1.0: 2 ports detected [ 25.031646] usb 1-1: configuration #1 chosen from 1 choice [ 25.034594] hub 1-1:1.0: USB hub found [ 25.036578] hub 1-1:1.0: 4 ports detected [ 25.054390] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21 [ 25.054404] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 25.054409] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 25.054448] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 25.058348] ehci_hcd 0000:00:1a.7: debug port 1 [ 25.058354] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 25.058358] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400 [ 25.071150] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.071241] usb usb6: configuration #1 chosen from 1 choice [ 25.071257] hub 6-0:1.0: USB hub found [ 25.071261] hub 6-0:1.0: 4 ports detected [ 25.142748] usb 1-1: USB disconnect, address 2 [ 25.174137] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 25.174152] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 25.174157] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 25.174188] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 25.178107] ehci_hcd 0000:00:1d.7: debug port 1 [ 25.178113] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 25.178117] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000 [ 25.190977] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.191122] usb usb7: configuration #1 chosen from 1 choice [ 25.191154] hub 7-0:1.0: USB hub found [ 25.191160] hub 7-0:1.0: 6 ports detected [ 25.294850] tg3.c:v3.86 (November 9, 2007) [ 25.294916] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 25.294928] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 25.314355] eth0: Tigon3 [partno(BCM95756m) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:0e:5a:60 [ 25.314360] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 25.314361] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 25.314410] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 25.367014] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9aff800-f9afffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 25.371460] ata_piix 0000:00:1f.1: version 2.12 [ 25.371470] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 25.371497] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 25.371556] scsi0 : ata_piix [ 25.372228] scsi1 : ata_piix [ 25.372674] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 25.372676] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 25.529381] Clocksource tsc unstable (delta = -4773736504 ns) [ 25.557324] Time: hpet clocksource has been installed. [ 25.568607] ata1.00: ATAPI: HL-DT-ST DVD+/-RW GSA-T11N, A103, max UDMA/33 [ 25.580580] ata1.00: configured for UDMA/33 [ 25.580665] ata2: port disabled. ignoring. [ 25.583417] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T11N A103 PQ: 0 ANSI: 5 [ 25.583502] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 25.597353] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 25.597390] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 25.597505] scsi2 : ata_piix [ 25.597642] scsi3 : ata_piix [ 25.598065] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17 [ 25.598067] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17 [ 25.609347] ata3.00: ATA-8: Hitachi HTS722020K9A300, DC4OC54P, max UDMA/133 [ 25.609354] ata3.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 25.613419] ata3.00: configured for UDMA/133 [ 25.631628] usb 1-1: new full speed USB device using uhci_hcd and address 3 [ 25.644398] usb 1-1: configuration #1 chosen from 1 choice [ 25.645461] hub 1-1:1.0: USB hub found [ 25.647401] hub 1-1:1.0: 4 ports detected [ 25.667661] ieee1394: Host added: ID:BUS[0-00:1023] GUID[344fc0002e149470] [ 25.692656] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 25.702523] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72202 DC4O PQ: 0 ANSI: 5 [ 25.710921] Driver 'sr' needs updating - please use bus_type methods [ 25.712774] Driver 'sd' needs updating - please use bus_type methods [ 25.721190] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 25.721194] Uniform CD-ROM driver Revision: 3.20 [ 25.721253] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 25.721433] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 25.721441] sd 2:0:0:0: [sda] Write Protect is off [ 25.721443] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.721455] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.721496] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 25.721503] sd 2:0:0:0: [sda] Write Protect is off [ 25.721504] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.721516] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.721518] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 25.724696] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 25.779205] usb 4-2: configuration #1 chosen from 1 choice [ 26.020992] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 26.061149] sda1 sda2 sda3 sda4 < sda5 > [ 26.081877] sd 2:0:0:0: [sda] Attached SCSI disk [ 26.197556] usb 5-2: configuration #1 chosen from 1 choice [ 26.325888] usb 1-1.1: new full speed USB device using uhci_hcd and address 4 [ 26.372743] usb 1-1.1: configuration #1 chosen from 1 choice [ 26.454299] usb 1-1.2: new full speed USB device using uhci_hcd and address 5 [ 26.498868] usb 1-1.2: configuration #1 chosen from 1 choice [ 26.504589] usbcore: registered new interface driver hiddev [ 26.517151] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.0/input/input2 [ 26.522336] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2 [ 26.528078] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.1/input/input3 [ 26.530053] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2 [ 26.530073] usbcore: registered new interface driver usbhid [ 26.530077] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 26.562737] Attempting manual resume [ 26.562739] swsusp: Resume From Partition 8:5 [ 26.562741] PM: Checking swsusp image. [ 26.562922] PM: Resume from disk failed. [ 26.602336] kjournald starting. Commit interval 5 seconds [ 26.602349] EXT3-fs: mounted filesystem with ordered data mode. [ 33.483836] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 34.119933] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 34.190993] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.232553] Linux agpgart interface v0.102 [ 34.538384] ACPI: Battery Slot [BAT0] (battery present) [ 34.550314] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa44713/0x200000 [ 34.568442] ACPI: AC Adapter [AC] (on-line) [ 34.585875] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 34.585984] input: Lid Switch as /devices/virtual/input/input6 [ 34.636725] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 34.666543] ACPI: Lid Switch [LID] [ 34.666586] input: Power Button (CM) as /devices/virtual/input/input7 [ 34.726014] ACPI: Power Button (CM) [PBTN] [ 34.726061] input: Sleep Button (CM) as /devices/virtual/input/input8 [ 34.770918] iTCO_vendor_support: vendor-support=0 [ 34.781896] ACPI: Sleep Button (CM) [SBTN] [ 34.781967] ACPI: WMI-Acer: Mapper loaded [ 34.797094] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 34.797156] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) [ 34.797190] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 34.863404] sdhci: Secure Digital Host Controller Interface driver [ 34.863406] sdhci: Copyright(c) Pierre Ossman [ 34.863436] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22) [ 34.863456] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22 [ 34.863503] mmc0: SDHCI at 0xf9aff500 irq 22 DMA [ 34.934695] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2f/LNXVIDEO:00/input/input9 [ 34.989542] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 35.149819] Bluetooth: Core ver 2.11 [ 35.153996] NET: Registered protocol family 31 [ 35.153998] Bluetooth: HCI device and connection manager initialized [ 35.154001] Bluetooth: HCI socket layer initialized [ 35.317863] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.3.27k [ 35.317866] iwl4965: Copyright(c) 2003-2008 Intel Corporation [ 35.317976] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 35.318004] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 35.318046] iwl4965: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 35.368931] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels [ 35.369368] ACPI: PCI interrupt for device 0000:0c:00.0 disabled [ 35.369742] phy0: Selected rate control algorithm 'iwl-4965-rs' [ 35.400900] Bluetooth: HCI USB driver ver 2.9 [ 35.402258] usbcore: registered new interface driver hci_usb [ 35.442966] nvidia: module license 'NVIDIA' taints kernel. [ 35.837156] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 35.837166] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 35.837266] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 36.033249] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 36.033266] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 36.314314] lp: driver loaded but no devices found [ 36.450690] NET: Registered protocol family 10 [ 36.450866] lo: Disabled Privacy Extensions [ 36.451150] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.465710] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k [ 37.293969] EXT3 FS on sda2, internal journal [ 38.292637] ip_tables: (C) 2000-2006 Netfilter Core Team [ 38.374087] Bridge firewalling registered [ 38.374153] br1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 39.241333] ACPI: ACPI Dock Station Driver [ 41.759758] apm: BIOS not found. [ 41.878550] ppdev: user-space parallel port driver [ 42.490915] audit(1218792739.384:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5893 profile="/usr/sbin/cupsd" namespace="default" [ 44.263495] br1: no IPv6 routers present [ 45.516439] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 45.516568] PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100102, writing 100106) [ 45.640647] Bluetooth: L2CAP ver 2.9 [ 45.640656] Bluetooth: L2CAP socket layer initialized [ 45.705533] Bluetooth: RFCOMM socket layer initialized [ 45.705823] Bluetooth: RFCOMM TTY layer initialized [ 45.705829] Bluetooth: RFCOMM ver 1.8 [ 45.809986] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 59.790919] CPU0 attaching NULL sched-domain. [ 59.790926] CPU1 attaching NULL sched-domain. [ 59.811263] CPU0 attaching sched-domain: [ 59.811270] domain 0: span 03 [ 59.811273] groups: 01 02 [ 59.811278] CPU1 attaching sched-domain: [ 59.811280] domain 0: span 03 [ 59.811283] groups: 02 01 [ 60.487703] NET: Registered protocol family 17 [ 61.244280] wlan0: authenticate with AP 00:1e:2a:23:bf:4e [ 61.246126] wlan0: authenticated [ 61.246129] wlan0: associate with AP 00:1e:2a:23:bf:4e [ 61.248442] wlan0: RX AssocResp from 00:1e:2a:23:bf:4e (capab=0x431 status=0 aid=1) [ 61.248445] wlan0: associated [ 61.257783] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 62.537962] padlock: VIA PadLock not detected. [ 73.911437] wlan0: no IPv6 routers present