[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-34-generic (buildd@lgw01-20) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016 (Ubuntu 4.4.0-34.53-generic 4.4.15) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=7b26ca41-b2d2-4e31-8d14-3a27cd9e2995 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] tseg: 00cfe00000 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffc6aff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bffc6b00-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq 6005 Pro SFF PC/3047h, BIOS 786G6 v01.15 08/02/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF00000000 write-back [ 0.000000] 1 base 0000D0000000 mask FFFFF0000000 uncachable [ 0.000000] 2 base 0000E0000000 mask FFFFE0000000 uncachable [ 0.000000] 3 base 000100000000 mask FFFFE0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3328MB, range: 256MB, type UC [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 3, base: 4GB, range: 512MB, type WB [ 0.000000] total RAM covered: 3328M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbffc6 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE [ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE [ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE [ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33b48000-0x35d9bfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000E5E10 000014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 0x00000000BFFD6B40 000040 (v01 HPQOEM SLIC-BPC 20110802 00000000) [ 0.000000] ACPI: FACP 0x00000000BFFD6BE8 000074 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: DSDT 0x00000000BFFD6F5F 0093C9 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x00000000BFFD6B00 000040 [ 0.000000] ACPI: APIC 0x00000000BFFD6C5C 000084 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: ASF! 0x00000000BFFD6CE0 000063 (v32 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: MCFG 0x00000000BFFD6D43 00003C (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: TCPA 0x00000000BFFD6D7F 000032 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: SLIC 0x00000000BFFD6DB1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.000000] ACPI: HPET 0x00000000BFFD6F27 000038 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11fff9000-0x11fffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bffc5fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff] [ 0.000000] On node 0 totalpages: 917348 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12224 pages used for memmap [ 0.000000] DMA32 zone: 782278 pages, LIFO batch:31 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10028300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffc6000-0xbffc6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffc7000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011fc00000 s98008 r8192 d28968 u524288 [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 902991 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=7b26ca41-b2d2-4e31-8d14-3a27cd9e2995 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xe408000000-0xe409ffffff] (32MB) [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 3425964K/3669392K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 243428K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:456 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2992.519 MHz processor [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.03 BogoMIPS (lpj=11970076) [ 0.000030] pid_max: default: 32768 minimum: 301 [ 0.000036] ACPI: Core revision 20150930 [ 0.002099] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.002119] Security Framework initialized [ 0.002121] Yama: becoming mindful. [ 0.002135] AppArmor: AppArmor initialized [ 0.002372] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003479] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004009] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004014] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004235] Initializing cgroup subsys io [ 0.004239] Initializing cgroup subsys memory [ 0.004246] Initializing cgroup subsys devices [ 0.004248] Initializing cgroup subsys freezer [ 0.004251] Initializing cgroup subsys net_cls [ 0.004254] Initializing cgroup subsys perf_event [ 0.004256] Initializing cgroup subsys net_prio [ 0.004258] Initializing cgroup subsys hugetlb [ 0.004261] Initializing cgroup subsys pids [ 0.004279] CPU: Physical Processor ID: 0 [ 0.004280] CPU: Processor Core ID: 0 [ 0.004282] mce: CPU supports 6 MCE banks [ 0.004287] LVT offset 0 assigned for vector 0xf9 [ 0.004291] process: using AMD E400 aware idle routine [ 0.004293] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.004294] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.004509] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000) [ 0.007827] ftrace: allocating 31994 entries in 125 pages [ 0.019944] smpboot: Max logical packages: 2 [ 0.019947] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.020335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.167199] smpboot: CPU0: AMD Athlon(tm) II X2 B24 Processor (family: 0x10, model: 0x6, stepping: 0x2) [ 0.167215] Performance Events: AMD PMU driver. [ 0.167219] ... version: 0 [ 0.167220] ... bit width: 48 [ 0.167221] ... generic registers: 4 [ 0.167222] ... value mask: 0000ffffffffffff [ 0.167222] ... max period: 00007fffffffffff [ 0.167223] ... fixed-purpose events: 0 [ 0.167224] ... event mask: 000000000000000f [ 0.167854] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.167926] x86: Booting SMP configuration: [ 0.167927] .... node #0, CPUs: #1 [ 0.170047] x86: Booted up 1 node, 2 CPUs [ 0.170049] smpboot: Total of 2 processors activated (11970.07 BogoMIPS) [ 0.170442] process: System has AMD C1E enabled [ 0.170460] process: Switch to broadcast mode on CPU1 [ 0.170504] process: Switch to broadcast mode on CPU0 [ 0.170573] devtmpfs: initialized [ 0.174187] evm: security.selinux [ 0.174188] evm: security.SMACK64 [ 0.174189] evm: security.SMACK64EXEC [ 0.174190] evm: security.SMACK64TRANSMUTE [ 0.174191] evm: security.SMACK64MMAP [ 0.174191] evm: security.ima [ 0.174192] evm: security.capability [ 0.174280] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.174334] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.174414] pinctrl core: initialized pinctrl subsystem [ 0.174541] RTC time: 22:21:22, date: 08/11/16 [ 0.174649] NET: Registered protocol family 16 [ 0.186507] cpuidle: using governor ladder [ 0.198508] cpuidle: using governor menu [ 0.198519] PCCT header not found. [ 0.198526] node 0 link 0: io port [1000, ffffff] [ 0.198528] TOM: 00000000e0000000 aka 3584M [ 0.198530] Fam 10h mmconf [mem 0xf4000000-0xf7ffffff] [ 0.198533] node 0 link 0: mmio [a0000, bffff] [ 0.198535] node 0 link 0: mmio [e0000000, f01fffff] [ 0.198536] node 0 link 0: mmio [f0200000, f3ffffff] [ 0.198537] node 0 link 0: mmio [f4000000, f7ffffff] ==> none [ 0.198539] node 0 link 0: mmio [f8000000, ffffffff] [ 0.198540] TOM2: 0000000120000000 aka 4608M [ 0.198542] bus: [bus 00-ff] on node 0 link 0 [ 0.198543] bus: 00 [io 0x0000-0xffff] [ 0.198544] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.198545] bus: 00 [mem 0xe0000000-0xf3ffffff] [ 0.198546] bus: 00 [mem 0xf8000000-0xffffffff] [ 0.198547] bus: 00 [mem 0x120000000-0xfcffffffff] [ 0.198632] ACPI: bus type PCI registered [ 0.198635] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.198714] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.198716] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.198725] PCI: Using configuration type 1 for base access [ 0.214971] ACPI: Added _OSI(Module Device) [ 0.214974] ACPI: Added _OSI(Processor Device) [ 0.214976] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.214977] ACPI: Added _OSI(Processor Aggregator Device) [ 0.216652] ACPI: Interpreter enabled [ 0.216659] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.216663] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.216675] ACPI: (supports S0 S3 S4 S5) [ 0.216676] ACPI: Using IOAPIC for interrupt routing [ 0.216771] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.219744] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.219749] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.219753] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20150930/nsarguments-189) [ 0.219786] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20150930/dsfield-211) [ 0.219790] ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node ffff88011b8a5fa0), AE_ALREADY_EXISTS (20150930/psparse-542) [ 0.219796] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM [ 0.219805] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.220078] PCI host bridge to bus 0000:00 [ 0.220081] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window] [ 0.220083] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.220085] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff window] [ 0.220087] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff window] [ 0.220088] pci_bus 0000:00: root bus resource [io 0x7000-0xafff window] [ 0.220090] pci_bus 0000:00: root bus resource [io 0xb000-0xffff window] [ 0.220091] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.220093] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff window] [ 0.220095] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.220097] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.220105] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.220182] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400 [ 0.220228] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.220303] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.220334] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.220362] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.220439] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.220464] pci 0000:00:11.0: reg 0x10: [io 0x2110-0x2117] [ 0.220473] pci 0000:00:11.0: reg 0x14: [io 0x2120-0x2123] [ 0.220481] pci 0000:00:11.0: reg 0x18: [io 0x2118-0x211f] [ 0.220490] pci 0000:00:11.0: reg 0x1c: [io 0x2124-0x2127] [ 0.220499] pci 0000:00:11.0: reg 0x20: [io 0x2100-0x210f] [ 0.220508] pci 0000:00:11.0: reg 0x24: [mem 0xf0309000-0xf03093ff] [ 0.220590] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.220605] pci 0000:00:12.0: reg 0x10: [mem 0xf0304000-0xf0304fff] [ 0.220683] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.220752] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.220766] pci 0000:00:12.1: reg 0x10: [mem 0xf0305000-0xf0305fff] [ 0.220844] pci 0000:00:12.1: System wakeup disabled by ACPI [ 0.220916] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.220940] pci 0000:00:12.2: reg 0x10: [mem 0xf0309400-0xf03094ff] [ 0.221007] pci 0000:00:12.2: supports D1 D2 [ 0.221009] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.221038] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.221118] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.221133] pci 0000:00:13.0: reg 0x10: [mem 0xf0306000-0xf0306fff] [ 0.221211] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.221280] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.221294] pci 0000:00:13.1: reg 0x10: [mem 0xf0307000-0xf0307fff] [ 0.221371] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.221444] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.221468] pci 0000:00:13.2: reg 0x10: [mem 0xf0309500-0xf03095ff] [ 0.221536] pci 0000:00:13.2: supports D1 D2 [ 0.221537] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.221566] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.221644] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.221773] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.221799] pci 0000:00:14.2: reg 0x10: [mem 0xf0300000-0xf0303fff 64bit] [ 0.221856] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.221910] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.222068] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.222126] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.222196] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.222210] pci 0000:00:14.5: reg 0x10: [mem 0xf0308000-0xf0308fff] [ 0.222288] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.222360] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.222411] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.222461] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.222518] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.222569] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.222655] pci 0000:01:05.0: [1002:9710] type 00 class 0x030000 [ 0.222665] pci 0000:01:05.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] [ 0.222669] pci 0000:01:05.0: reg 0x14: [io 0x1100-0x11ff] [ 0.222673] pci 0000:01:05.0: reg 0x18: [mem 0xf0100000-0xf010ffff] [ 0.222681] pci 0000:01:05.0: reg 0x24: [mem 0xf0000000-0xf00fffff] [ 0.222693] pci 0000:01:05.0: supports D1 D2 [ 0.222784] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.222787] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.222789] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf01fffff] [ 0.222792] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.222838] pci 0000:3f:00.0: [14e4:1681] type 00 class 0x020000 [ 0.222873] pci 0000:3f:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff 64bit] [ 0.222887] pci 0000:3f:00.0: reg 0x18: [mem 0xf0210000-0xf021ffff 64bit] [ 0.222960] pci 0000:3f:00.0: PME# supported from D3hot D3cold [ 0.230523] pci 0000:00:0a.0: PCI bridge to [bus 3f] [ 0.230530] pci 0000:00:0a.0: bridge window [mem 0xf0200000-0xf02fffff] [ 0.230747] pci 0000:00:14.4: PCI bridge to [bus 0f] (subtractive decode) [ 0.230756] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode) [ 0.230758] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.230760] pci 0000:00:14.4: bridge window [io 0x1000-0x2fff window] (subtractive decode) [ 0.230761] pci 0000:00:14.4: bridge window [io 0x3000-0x6fff window] (subtractive decode) [ 0.230763] pci 0000:00:14.4: bridge window [io 0x7000-0xafff window] (subtractive decode) [ 0.230764] pci 0000:00:14.4: bridge window [io 0xb000-0xffff window] (subtractive decode) [ 0.230766] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.230768] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf3ffffff window] (subtractive decode) [ 0.230770] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.231117] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.231157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.231196] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.231233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.231271] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.231308] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.231345] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.231382] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.231669] vgaarb: setting as boot device: PCI:0000:01:05.0 [ 0.231671] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.231672] vgaarb: loaded [ 0.231673] vgaarb: bridge control possible 0000:01:05.0 [ 0.231905] SCSI subsystem initialized [ 0.231968] libata version 3.00 loaded. [ 0.231988] ACPI: bus type USB registered [ 0.232002] usbcore: registered new interface driver usbfs [ 0.232010] usbcore: registered new interface driver hub [ 0.232022] usbcore: registered new device driver usb [ 0.232152] PCI: Using ACPI for IRQ routing [ 0.234145] PCI: pci_cache_line_size set to 64 bytes [ 0.234191] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.234192] e820: reserve RAM buffer [mem 0xbffc6b00-0xbfffffff] [ 0.234288] NetLabel: Initializing [ 0.234289] NetLabel: domain hash size = 128 [ 0.234290] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.234299] NetLabel: unlabeled traffic allowed by default [ 0.234400] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.234403] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.236451] clocksource: Switched to clocksource hpet [ 0.242550] AppArmor: AppArmor Filesystem Enabled [ 0.242620] pnp: PnP ACPI init [ 0.242683] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.242707] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.242729] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.242953] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.242995] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.243180] system 00:05: [io 0x040b] has been reserved [ 0.243182] system 00:05: [io 0x04d0-0x04df] has been reserved [ 0.243185] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.243221] system 00:06: [io 0x0800-0x087f] has been reserved [ 0.243223] system 00:06: [io 0x0880-0x088f] has been reserved [ 0.243225] system 00:06: [io 0x0c00-0x0c1f] has been reserved [ 0.243227] system 00:06: [io 0x0c50-0x0c6f] has been reserved [ 0.243228] system 00:06: [io 0x0cd0-0x0cdf] has been reserved [ 0.243230] system 00:06: [io 0xf800-0xf87f] could not be reserved [ 0.243232] system 00:06: [io 0xf880-0xf8ff] has been reserved [ 0.243234] system 00:06: [io 0xf900-0xf97f] has been reserved [ 0.243235] system 00:06: [io 0xf980-0xf9ff] has been reserved [ 0.243237] system 00:06: [io 0xfa00-0xfa7f] has been reserved [ 0.243239] system 00:06: [io 0xfa80-0xfaff] has been reserved [ 0.243240] system 00:06: [io 0xfc00-0xfc7f] has been reserved [ 0.243242] system 00:06: [io 0xfd00-0xfd7f] has been reserved [ 0.243244] system 00:06: [io 0xfd80-0xfdff] has been reserved [ 0.243246] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.243452] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.243454] system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.243456] system 00:07: [mem 0x000e4000-0x000fffff] could not be reserved [ 0.243458] system 00:07: [mem 0xfec01000-0xfecfffff] has been reserved [ 0.243460] system 00:07: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 0.243462] system 00:07: [mem 0xfed45000-0xffffffff] has been reserved [ 0.243464] system 00:07: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.243466] system 00:07: [mem 0x000d1c00-0x000e3fff] has been reserved [ 0.243468] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.243475] pnp: PnP ACPI: found 8 devices [ 0.250820] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.250840] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.250842] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.250845] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf01fffff] [ 0.250847] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.250851] pci 0000:00:0a.0: PCI bridge to [bus 3f] [ 0.250853] pci 0000:00:0a.0: bridge window [mem 0xf0200000-0xf02fffff] [ 0.250857] pci 0000:00:14.4: PCI bridge to [bus 0f] [ 0.250869] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff window] [ 0.250871] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window] [ 0.250873] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff window] [ 0.250874] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff window] [ 0.250876] pci_bus 0000:00: resource 8 [io 0x7000-0xafff window] [ 0.250877] pci_bus 0000:00: resource 9 [io 0xb000-0xffff window] [ 0.250879] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window] [ 0.250881] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff window] [ 0.250882] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window] [ 0.250884] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.250886] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf01fffff] [ 0.250888] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.250889] pci_bus 0000:3f: resource 1 [mem 0xf0200000-0xf02fffff] [ 0.250891] pci_bus 0000:0f: resource 4 [mem 0xf8000000-0xfebfffff window] [ 0.250893] pci_bus 0000:0f: resource 5 [io 0x0000-0x0cf7 window] [ 0.250895] pci_bus 0000:0f: resource 6 [io 0x1000-0x2fff window] [ 0.250896] pci_bus 0000:0f: resource 7 [io 0x3000-0x6fff window] [ 0.250898] pci_bus 0000:0f: resource 8 [io 0x7000-0xafff window] [ 0.250899] pci_bus 0000:0f: resource 9 [io 0xb000-0xffff window] [ 0.250901] pci_bus 0000:0f: resource 10 [mem 0x000a0000-0x000bffff window] [ 0.250903] pci_bus 0000:0f: resource 11 [mem 0xe0000000-0xf3ffffff window] [ 0.250905] pci_bus 0000:0f: resource 12 [mem 0xfed40000-0xfed44fff window] [ 0.250937] NET: Registered protocol family 2 [ 0.251081] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.251169] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.251291] TCP: Hash tables configured (established 32768 bind 32768) [ 0.251333] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.251355] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.251427] NET: Registered protocol family 1 [ 0.251441] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.528675] pci 0000:01:05.0: Video device with shadowed ROM [ 0.528682] PCI: CLS 64 bytes, default 64 [ 0.528738] Trying to unpack rootfs image as initramfs... [ 1.034606] Freeing initrd memory: 35152K (ffff880033b48000 - ffff880035d9c000) [ 1.034821] PCI-DMA: Disabling AGP. [ 1.034931] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 1.034932] PCI-DMA: using GART IOMMU. [ 1.034934] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.037396] LVT offset 1 assigned for vector 0x400 [ 1.037405] IBS: LVT offset 1 assigned [ 1.037464] perf: AMD IBS detected (0x0000001f) [ 1.037549] Scanning for low memory corruption every 60 seconds [ 1.037938] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.037970] audit: initializing netlink subsys (disabled) [ 1.037987] audit: type=2000 audit(1470954082.928:1): initialized [ 1.038269] Initialise system trusted keyring [ 1.038464] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 1.038467] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.039803] zbud: loaded [ 1.040120] VFS: Disk quotas dquot_6.6.0 [ 1.040155] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.040392] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.040787] fuse init (API version 7.23) [ 1.041009] Key type big_key registered [ 1.041031] Allocating IMA MOK and blacklist keyrings. [ 1.041741] Key type asymmetric registered [ 1.041744] Asymmetric key parser 'x509' registered [ 1.041779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.041860] io scheduler noop registered [ 1.041863] io scheduler deadline registered (default) [ 1.041890] io scheduler cfq registered [ 1.042142] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.042147] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.042172] vesafb: mode is 1024x768x8, linelength=1024, pages=0 [ 1.042173] vesafb: scrolling: redraw [ 1.042175] vesafb: Pseudocolor: size=0:6:6:6, shift=0:0:0:0 [ 1.042186] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 768k, total 768k [ 1.042337] Console: switching to colour frame buffer device 128x48 [ 1.042351] fb0: VESA VGA frame buffer device [ 1.042420] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.042423] ACPI: Power Button [PBTN] [ 1.042456] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.042458] ACPI: Power Button [PWRF] [ 1.042523] ACPI: processor limited to max C-state 1 [ 1.042809] GHES: HEST is not enabled! [ 1.042972] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.063512] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.065255] Linux agpgart interface v0.103 [ 1.124589] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) [ 1.352582] tpm_tis 00:04: TPM is disabled/deactivated (0x7) [ 1.356682] brd: module loaded [ 1.358277] loop: module loaded [ 1.358495] libphy: Fixed MDIO Bus: probed [ 1.358497] tun: Universal TUN/TAP device driver, 1.6 [ 1.358498] tun: (C) 1999-2004 Max Krasnyansky [ 1.358608] PPP generic driver version 2.4.2 [ 1.358666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.358669] ehci-pci: EHCI PCI platform driver [ 1.358882] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.358888] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.358893] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.358902] ehci-pci 0000:00:12.2: debug port 1 [ 1.358939] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0309400 [ 1.368552] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.368607] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.368609] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.368611] usb usb1: Product: EHCI Host Controller [ 1.368613] usb usb1: Manufacturer: Linux 4.4.0-34-generic ehci_hcd [ 1.368614] usb usb1: SerialNumber: 0000:00:12.2 [ 1.368794] hub 1-0:1.0: USB hub found [ 1.368799] hub 1-0:1.0: 6 ports detected [ 1.369086] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.369091] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.369095] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.369104] ehci-pci 0000:00:13.2: debug port 1 [ 1.369138] ehci-pci 0000:00:13.2: irq 19, io mem 0xf0309500 [ 1.380554] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.380609] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.380611] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.380612] usb usb2: Product: EHCI Host Controller [ 1.380614] usb usb2: Manufacturer: Linux 4.4.0-34-generic ehci_hcd [ 1.380615] usb usb2: SerialNumber: 0000:00:13.2 [ 1.380794] hub 2-0:1.0: USB hub found [ 1.380800] hub 2-0:1.0: 6 ports detected [ 1.380950] ehci-platform: EHCI generic platform driver [ 1.380966] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.380969] ohci-pci: OHCI PCI platform driver [ 1.381164] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.381169] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.381196] ohci-pci 0000:00:12.0: irq 16, io mem 0xf0304000 [ 1.440626] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.440629] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.440631] usb usb3: Product: OHCI PCI host controller [ 1.440632] usb usb3: Manufacturer: Linux 4.4.0-34-generic ohci_hcd [ 1.440634] usb usb3: SerialNumber: 0000:00:12.0 [ 1.440904] hub 3-0:1.0: USB hub found [ 1.440948] hub 3-0:1.0: 3 ports detected [ 1.441179] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.441184] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.441206] ohci-pci 0000:00:12.1: irq 16, io mem 0xf0305000 [ 1.500624] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.500628] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.500629] usb usb4: Product: OHCI PCI host controller [ 1.500631] usb usb4: Manufacturer: Linux 4.4.0-34-generic ohci_hcd [ 1.500632] usb usb4: SerialNumber: 0000:00:12.1 [ 1.500902] hub 4-0:1.0: USB hub found [ 1.500945] hub 4-0:1.0: 3 ports detected [ 1.501175] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.501180] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.501209] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0306000 [ 1.560624] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.560628] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.560629] usb usb5: Product: OHCI PCI host controller [ 1.560631] usb usb5: Manufacturer: Linux 4.4.0-34-generic ohci_hcd [ 1.560632] usb usb5: SerialNumber: 0000:00:13.0 [ 1.560905] hub 5-0:1.0: USB hub found [ 1.560949] hub 5-0:1.0: 3 ports detected [ 1.561178] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.561183] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.561207] ohci-pci 0000:00:13.1: irq 18, io mem 0xf0307000 [ 1.620624] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.620627] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.620629] usb usb6: Product: OHCI PCI host controller [ 1.620630] usb usb6: Manufacturer: Linux 4.4.0-34-generic ohci_hcd [ 1.620632] usb usb6: SerialNumber: 0000:00:13.1 [ 1.620821] hub 6-0:1.0: USB hub found [ 1.620871] hub 6-0:1.0: 3 ports detected [ 1.621142] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.621147] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.621171] ohci-pci 0000:00:14.5: irq 18, io mem 0xf0308000 [ 1.680598] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.680643] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.680644] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.680646] usb usb7: Product: OHCI PCI host controller [ 1.680647] usb usb7: Manufacturer: Linux 4.4.0-34-generic ohci_hcd [ 1.680649] usb usb7: SerialNumber: 0000:00:14.5 [ 1.680838] hub 7-0:1.0: USB hub found [ 1.680847] hub 7-0:1.0: 2 ports detected [ 1.680941] ohci-platform: OHCI generic platform driver [ 1.680956] uhci_hcd: USB Universal Host Controller Interface driver [ 1.681022] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 1.684120] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.684133] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.684332] mousedev: PS/2 mouse device common for all mice [ 1.684525] rtc_cmos 00:00: RTC can wake from S4 [ 1.684667] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.684689] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.684696] i2c /dev entries driver [ 1.684756] device-mapper: uevent: version 1.0.3 [ 1.684845] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.684862] ledtrig-cpu: registered to indicate activity on CPUs [ 1.685256] NET: Registered protocol family 10 [ 1.685525] NET: Registered protocol family 17 [ 1.685542] Key type dns_resolver registered [ 1.685750] microcode: CPU0: patch_level=0x010000b7 [ 1.685763] microcode: CPU1: patch_level=0x010000b7 [ 1.685825] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.686005] registered taskstats version 1 [ 1.686023] Loading compiled-in X.509 certificates [ 1.686978] Loaded X.509 cert 'Build time autogenerated kernel key: c40ffa48d8617ce4553ee3ab59017c95e74f2501' [ 1.686994] zswap: loaded using pool lzo/zbud [ 1.688773] Key type trusted registered [ 1.691797] Key type encrypted registered [ 1.691806] AppArmor: AppArmor sha1 policy hashing enabled [ 1.696499] usb 2-4: new high-speed USB device number 2 using ehci-pci [ 1.740579] tpm_tis 00:04: A TPM error (7) occurred attempting to read a pcr value [ 1.740583] ima: No TPM chip found, activating TPM-bypass! [ 1.740617] evm: HMAC attrs: 0x1 [ 1.740910] Magic number: 12:994:400 [ 1.741043] rtc_cmos 00:00: setting system clock to 2016-08-11 22:21:23 UTC (1470954083) [ 1.741145] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.741240] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.741241] EDD information not available. [ 1.741287] PM: Hibernation image not present or could not be loaded. [ 1.742631] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000) [ 1.742634] Write protecting the kernel read-only data: 14336k [ 1.743466] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000) [ 1.743944] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000) [ 1.761419] random: systemd-udevd urandom read with 7 bits of entropy available [ 1.803068] ahci 0000:00:11.0: version 3.0 [ 1.803351] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.803354] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio slum part ccc [ 1.807022] [drm] Initialized drm 1.1.0 20060810 [ 1.812396] pps_core: LinuxPPS API ver. 1 registered [ 1.812399] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.812724] scsi host0: ahci [ 1.813775] PTP clock support registered [ 1.820492] scsi host1: ahci [ 1.828490] scsi host2: ahci [ 1.832964] scsi host3: ahci [ 1.833338] usb 2-4: New USB device found, idVendor=03f0, idProduct=7311 [ 1.833340] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.833342] usb 2-4: Product: Photosmart C309a series [ 1.833343] usb 2-4: Manufacturer: HP [ 1.833345] usb 2-4: SerialNumber: MY99NH9152058R [ 1.833380] tg3.c:v3.137 (May 11, 2014) [ 1.851397] scsi host4: ahci [ 1.851675] wmi: Mapper loaded [ 1.859145] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.860545] scsi host5: ahci [ 1.860613] ata1: SATA max UDMA/133 abar m1024@0xf0309000 port 0xf0309100 irq 22 [ 1.860617] ata2: SATA max UDMA/133 abar m1024@0xf0309000 port 0xf0309180 irq 22 [ 1.860621] ata3: SATA max UDMA/133 abar m1024@0xf0309000 port 0xf0309200 irq 22 [ 1.860625] ata4: SATA max UDMA/133 abar m1024@0xf0309000 port 0xf0309280 irq 22 [ 1.860629] ata5: SATA max UDMA/133 abar m1024@0xf0309000 port 0xf0309300 irq 22 [ 1.860634] ata6: SATA max UDMA/133 abar m1024@0xf0309000 port 0xf0309380 irq 22 [ 1.868430] [drm] radeon kernel modesetting enabled. [ 1.869214] tg3 0000:3f:00.0 eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address 78:e7:d1:c5:50:fc [ 1.869218] tg3 0000:3f:00.0 eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.869220] tg3 0000:3f:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.869222] tg3 0000:3f:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.883710] AMD IOMMUv2 driver by Joerg Roedel [ 1.883714] AMD IOMMUv2 functionality not available on this system [ 1.887531] CRAT table not found [ 1.887534] Finished initializing topology ret=0 [ 1.887576] kfd kfd: Initialized module [ 1.887813] checking generic (e0000000 c0000) vs hw (e0000000 10000000) [ 1.887815] fb: switching to radeondrmfb from VESA VGA [ 1.887846] Console: switching to colour dummy device 80x25 [ 1.888137] [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x103C:0x3047). [ 1.888147] [drm] register mmio base: 0xF0100000 [ 1.888148] [drm] register mmio size: 65536 [ 1.888195] ATOM BIOS: HP_Wolves [ 1.888215] radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used) [ 1.888217] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 1.888222] [drm] Detected VRAM RAM=368M, BAR=256M [ 1.888223] [drm] RAM width 32bits DDR [ 1.892494] [TTM] Zone kernel: Available graphics memory: 1765280 kiB [ 1.892497] [TTM] Initializing pool allocator [ 1.892501] [TTM] Initializing DMA pool allocator [ 1.892525] [drm] radeon: 368M of VRAM memory ready [ 1.892526] [drm] radeon: 512M of GTT memory ready. [ 1.892539] [drm] Loading RS780 Microcode [ 1.892593] [drm] radeon: power management initialized [ 1.892665] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.906029] [drm] PCIE GART of 512M enabled (table at 0x00000000C0258000). [ 1.906483] radeon 0000:01:05.0: WB enabled [ 1.906486] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800bec39c00 [ 1.910984] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0xffffc90000c16038 [ 1.912208] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.912211] [drm] Driver supports precise vblank timestamp query. [ 1.912215] radeon 0000:01:05.0: radeon: MSI limited to 32-bit [ 1.912230] [drm] radeon: irq initialized. [ 1.945069] [drm] ring test on 0 succeeded in 1 usecs [ 2.036466] tsc: Refined TSC clocksource calibration: 2992.498 MHz [ 2.036470] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2296bc2b9, max_idle_ns: 440795321505 ns [ 2.121161] [drm] ring test on 5 succeeded in 1 usecs [ 2.121168] [drm] UVD initialized successfully. [ 2.122003] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.184519] ata3: SATA link down (SStatus 0 SControl 300) [ 2.184557] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.271581] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2.271585] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 2.271589] ata2.00: ATAPI: hp DDVDW TS-H653R, 0E00, max UDMA/100 [ 2.271637] ata5: SATA link down (SStatus 0 SControl 300) [ 2.271689] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.271730] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.271761] ata6: SATA link down (SStatus 0 SControl 300) [ 2.272961] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2.272965] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 2.273930] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 2.274006] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2.274011] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 2.274015] ata2.00: configured for UDMA/100 [ 2.289974] usb 1-3: New USB device found, idVendor=148f, idProduct=9021 [ 2.289978] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.289980] usb 1-3: Product: 802.11 bg WLAN [ 2.289982] usb 1-3: Manufacturer: Ralink [ 2.297655] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2.297659] ata4.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 2.297819] ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 2.297999] ata4.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 2.298002] ata4.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.298004] ata4.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.298862] ata4.00: ATA-7: Hitachi HDS721010KLA330, GKAOA9DA, max UDMA/133 [ 2.298864] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.299669] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2.299671] ata4.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 2.299849] ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 2.300011] ata4.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 2.300013] ata4.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.300015] ata4.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.300888] ata4.00: configured for UDMA/133 [ 2.375324] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 2.375330] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.375332] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.377442] ata1.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133 [ 2.377447] ata1.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.379643] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2.379647] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 2.380597] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 2.382455] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 2.382461] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.382463] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.384626] ata1.00: configured for UDMA/133 [ 2.387220] usb-storage 2-4:1.3: USB Mass Storage device detected [ 2.387251] scsi 0:0:0:0: Direct-Access ATA Maxtor 7L250S0 1G10 PQ: 0 ANSI: 5 [ 2.387488] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.387508] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/233 GiB) [ 2.387603] sd 0:0:0:0: [sda] Write Protect is off [ 2.387606] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.387623] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.389157] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-H653R 0E00 PQ: 0 ANSI: 5 [ 2.393735] scsi host6: usb-storage 2-4:1.3 [ 2.393829] usbcore: registered new interface driver usb-storage [ 2.395266] usbcore: registered new interface driver uas [ 2.398310] tg3 0000:3f:00.0 enp63s0: renamed from eth0 [ 2.400506] usb 1-4: new high-speed USB device number 3 using ehci-pci [ 2.407745] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.407750] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.407892] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.407961] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.409762] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72101 A9DA PQ: 0 ANSI: 5 [ 2.409958] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2.409982] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.410044] sd 3:0:0:0: [sdb] Write Protect is off [ 2.410046] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.410063] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.441496] sdb: sdb1 < sdb5 > [ 2.441828] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.453870] sda: sda1 sda2 sda3 sda4 < sda5 > [ 2.454335] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.548198] usb 1-4: New USB device found, idVendor=07d1, idProduct=3c0a [ 2.548203] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.548205] usb 1-4: Product: 11n Adapter [ 2.548206] usb 1-4: Manufacturer: Ralink [ 2.548208] usb 1-4: SerialNumber: 1.0 [ 2.768567] [drm] ib test on ring 5 succeeded [ 2.769868] [drm] Radeon Display Connectors [ 2.769871] [drm] Connector 0: [ 2.769872] [drm] VGA-1 [ 2.769874] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 2.769875] [drm] Encoders: [ 2.769876] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.769877] [drm] Connector 1: [ 2.769878] [drm] DP-1 [ 2.769879] [drm] HPD1 [ 2.769880] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 2.769881] [drm] Encoders: [ 2.769882] [drm] DFP1: INTERNAL_UNIPHY [ 2.819758] [drm] fb mappable at 0xE0359000 [ 2.819761] [drm] vram apper at 0xE0000000 [ 2.819762] [drm] size 5242880 [ 2.819764] [drm] fb depth is 24 [ 2.819764] [drm] pitch is 5120 [ 2.819906] fbcon: radeondrmfb (fb0) is primary device [ 2.819977] Console: switching to colour frame buffer device 160x64 [ 2.819999] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 2.828535] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:05.0 on minor 0 [ 2.864548] usb 4-2: new low-speed USB device number 2 using ohci-pci [ 3.034659] usb 4-2: New USB device found, idVendor=413c, idProduct=2003 [ 3.034663] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.034665] usb 4-2: Product: Dell USB Keyboard [ 3.034667] usb 4-2: Manufacturer: Dell [ 3.036600] clocksource: Switched to clocksource tsc [ 3.042004] hidraw: raw HID events driver (C) Jiri Kosina [ 3.049824] usbcore: registered new interface driver usbhid [ 3.049827] usbhid: USB HID core driver [ 3.052579] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/0003:413C:2003.0001/input/input5 [ 3.108799] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:12.1-2/input0 [ 3.172489] usb 4-3: new low-speed USB device number 3 using ohci-pci [ 3.278907] random: nonblocking pool is initialized [ 3.341650] usb 4-3: New USB device found, idVendor=413c, idProduct=3012 [ 3.341653] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.341656] usb 4-3: Product: Dell USB Optical Mouse [ 3.341657] usb 4-3: Manufacturer: Dell [ 3.348869] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/0003:413C:3012.0002/input/input6 [ 3.348990] hid-generic 0003:413C:3012.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:12.1-3/input0 [ 3.393444] scsi 6:0:0:0: Direct-Access HP Photosmart C309a 1.00 PQ: 0 ANSI: 5 [ 3.394114] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 3.396869] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 3.726804] microcode: CPU0: new patch_level=0x010000c7 [ 3.726811] microcode: CPU1: new patch_level=0x010000c7 [ 5.751776] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 7.074619] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 7.074723] systemd[1]: Detected architecture x86-64. [ 7.095196] systemd[1]: Set hostname to . [ 8.816837] systemd[1]: Listening on Journal Audit Socket. [ 8.816922] systemd[1]: Listening on udev Control Socket. [ 8.816940] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.816949] systemd[1]: Reached target Remote File Systems (Pre). [ 8.817060] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.817139] systemd[1]: Created slice User and Session Slice. [ 8.817150] systemd[1]: Reached target Encrypted Volumes. [ 8.817173] systemd[1]: Listening on Syslog Socket. [ 8.817183] systemd[1]: Reached target User and Group Name Lookups. [ 8.817215] systemd[1]: Listening on Journal Socket. [ 8.817273] systemd[1]: Created slice System Slice. [ 8.832603] systemd[1]: Mounting POSIX Message Queue File System... [ 8.920727] systemd[1]: Started Braille Device Support. [ 8.921500] systemd[1]: Starting Nameserver information manager... [ 8.922006] systemd[1]: Starting Set console keymap... [ 8.922040] systemd[1]: Reached target Slices. [ 8.922066] systemd[1]: Reached target Remote File Systems. [ 8.922143] systemd[1]: Listening on udev Kernel Socket. [ 8.923146] systemd[1]: Mounting Huge Pages File System... [ 8.923236] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.923807] systemd[1]: Starting Journal Service... [ 8.924324] systemd[1]: Started Read required files in advance. [ 8.924549] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.925120] systemd[1]: Mounting Debug File System... [ 8.926008] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 8.941591] systemd[1]: Starting Load Kernel Modules... [ 9.006684] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 9.113244] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 9.125195] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.451013] systemd[1]: Mounted Debug File System. [ 9.451092] systemd[1]: Mounted POSIX Message Queue File System. [ 9.451131] systemd[1]: Mounted Huge Pages File System. [ 9.604660] systemd[1]: Started Nameserver information manager. [ 9.823612] lp: driver loaded but no devices found [ 9.957312] ppdev: user-space parallel port driver [ 10.013318] systemd[1]: Started Journal Service. [ 12.195215] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 13.098603] systemd-journald[859]: Received request to flush runtime journal from PID 1 [ 13.205316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.231132] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xfc00, revision 0 [ 13.231230] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xfb00 [ 14.161725] EDAC MC: Ver: 3.0.0 [ 14.279471] MCE: In-kernel MCE decoding enabled. [ 14.310869] AMD64 EDAC driver v3.4.0 [ 14.310901] EDAC amd64: DRAM ECC disabled. [ 14.310907] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 14.611699] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 14.611703] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 14.611714] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 14.611716] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 14.611717] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 14.611719] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 14.611721] snd_hda_codec_realtek hdaudioC0D0: Line=0x18 [ 14.622193] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 14.622247] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 14.622295] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 14.622342] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 15.754316] kvm: Nested Virtualization enabled [ 15.754320] kvm: Nested Paging enabled [ 16.051594] input: HP WMI hotkeys as /devices/virtual/input/input11 [ 17.632432] usb 1-3: reset high-speed USB device number 2 using ehci-pci [ 17.642736] Adding 1003516k swap on /dev/sda5. Priority:-1 extents:1 across:1003516k FS [ 18.117276] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a [ 18.194293] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 18.195194] usbcore: registered new interface driver rt73usb [ 18.224448] usb 1-4: reset high-speed USB device number 3 using ehci-pci [ 18.242555] rt73usb 1-3:1.0 wlx00d041b91e4b: renamed from wlan0 [ 18.365843] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected [ 18.394359] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0008 detected [ 18.394782] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 18.395062] usbcore: registered new interface driver rt2800usb [ 18.401282] rt2800usb 1-4:1.0 wlx28107b411c71: renamed from wlan0 [ 18.805083] audit: type=1400 audit(1470954100.559:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2148 comm="apparmor_parser" [ 18.805092] audit: type=1400 audit(1470954100.559:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=2148 comm="apparmor_parser" [ 18.829170] audit: type=1400 audit(1470954100.583:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2149 comm="apparmor_parser" [ 18.829179] audit: type=1400 audit(1470954100.583:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2149 comm="apparmor_parser" [ 18.829185] audit: type=1400 audit(1470954100.583:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2149 comm="apparmor_parser" [ 18.829189] audit: type=1400 audit(1470954100.583:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2149 comm="apparmor_parser" [ 18.836812] audit: type=1400 audit(1470954100.591:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=2212 comm="apparmor_parser" [ 18.848094] cfg80211: World regulatory domain updated: [ 18.848098] cfg80211: DFS Master region: unset [ 18.848100] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 18.848102] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 18.848104] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 18.848105] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 18.848107] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 18.848109] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 18.848110] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 18.848112] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 18.848113] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 19.072743] audit: type=1400 audit(1470954100.827:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=2210 comm="apparmor_parser" [ 19.072753] audit: type=1400 audit(1470954100.827:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=2210 comm="apparmor_parser" [ 19.072758] audit: type=1400 audit(1470954100.827:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=2210 comm="apparmor_parser" [ 21.194766] cgroup: new mount options do not match the existing superblock, will be ignored [ 26.133919] usblp 2-4:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7311 [ 26.133996] usbcore: registered new interface driver usblp [ 27.439276] rfkill: input handler disabled [ 28.443942] Bluetooth: Core ver 2.21 [ 28.443965] NET: Registered protocol family 31 [ 28.443966] Bluetooth: HCI device and connection manager initialized [ 28.443971] Bluetooth: HCI socket layer initialized [ 28.443974] Bluetooth: L2CAP socket layer initialized [ 28.443978] Bluetooth: SCO socket layer initialized [ 30.890844] IPv6: ADDRCONF(NETDEV_UP): wlx28107b411c71: link is not ready [ 30.890890] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 31.120569] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 31.391342] IPv6: ADDRCONF(NETDEV_UP): wlx28107b411c71: link is not ready [ 31.395087] IPv6: ADDRCONF(NETDEV_UP): wlx00d041b91e4b: link is not ready [ 31.395132] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin' [ 31.480386] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7 [ 31.559506] IPv6: ADDRCONF(NETDEV_UP): wlx00d041b91e4b: link is not ready [ 31.564602] IPv6: ADDRCONF(NETDEV_UP): enp63s0: link is not ready [ 32.949615] IPv6: ADDRCONF(NETDEV_UP): enp63s0: link is not ready [ 33.056713] usblp0: removed [ 33.063127] usblp 2-4:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7311 [ 33.967531] IPv6: ADDRCONF(NETDEV_UP): wlx00d041b91e4b: link is not ready [ 33.979753] IPv6: ADDRCONF(NETDEV_UP): wlx28107b411c71: link is not ready [ 35.316155] wlx28107b411c71: authenticate with 08:86:3b:27:22:70 [ 35.347652] wlx28107b411c71: send auth to 08:86:3b:27:22:70 (try 1/3) [ 35.349164] wlx28107b411c71: authenticated [ 35.352355] wlx28107b411c71: associate with 08:86:3b:27:22:70 (try 1/3) [ 35.356038] wlx28107b411c71: RX AssocResp from 08:86:3b:27:22:70 (capab=0x411 status=0 aid=1) [ 35.364612] wlx28107b411c71: associated [ 35.364671] IPv6: ADDRCONF(NETDEV_CHANGE): wlx28107b411c71: link becomes ready [ 36.103045] ip_tables: (C) 2000-2006 Netfilter Core Team [ 36.137850] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 36.262912] Ebtables v2.0 registered [ 36.713514] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 36.744466] device virbr0-nic entered promiscuous mode [ 37.167161] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 37.334229] IPv6: wlx28107b411c71: IPv6 duplicate address fe80::2a52:e25f:7bcd:d350 detected! [ 37.411144] virbr0: port 1(virbr0-nic) entered listening state [ 37.411163] virbr0: port 1(virbr0-nic) entered listening state [ 37.692682] virbr0: port 1(virbr0-nic) entered disabled state [ 37.693634] device virbr0-nic left promiscuous mode [ 37.693655] virbr0: port 1(virbr0-nic) entered disabled state [ 38.635845] IPv6: wlx28107b411c71: IPv6 duplicate address fe80::c560:5255:25fa:9b1f detected! [ 42.000527] ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:a721:7e31:14a1:2195 on wlx28107b411c71! [ 54.492844] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 54.492847] Bluetooth: BNEP filters: protocol multicast [ 54.492852] Bluetooth: BNEP socket layer initialized