X.Org X Server 1.5.2 Release Date: 10 October 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-16-server x86_64 Ubuntu Current Operating System: Linux foxtrot 2.6.27-7-generic #1 SMP Fri Oct 24 06:40:41 UTC 2008 x86_64 Build Date: 24 October 2008 09:06:49AM xorg-server 2:1.5.2-2ubuntu3 (buildd@crested.buildd) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 25 18:23:11 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x7b7320 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 X.Org Font Renderer : 0.6 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@1:0:0) nVidia Corporation G80 [GeForce 8800 GTS] rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000a000/128, BIOS @ 0x????????/131072 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded by default. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 177.80 Wed Oct 1 15:09:29 PDT 2008 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.5.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.6 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) NVIDIA dlloader X Driver 177.80 Wed Oct 1 14:50:00 PDT 2008 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 01@00:00:0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib/xorg/modules//libwfb.so (II) Module wfb: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "NoLogo" "True" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS (G80) at PCI:1:0:0 (GPU-0) (--) NVIDIA(0): Memory: 655360 kBytes (--) NVIDIA(0): VideoBIOS: 60.80.13.00.02 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS at PCI:1:0:0: (--) NVIDIA(0): SONY TV (DFP-1) (--) NVIDIA(0): SONY TV (DFP-1): 330.0 MHz maximum pixel clock (--) NVIDIA(0): SONY TV (DFP-1): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-1 (==) NVIDIA(0): (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) NVIDIA(0): will be used as the requested mode. (==) NVIDIA(0): (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select" (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080 (--) NVIDIA(0): DPI set to (69, 68); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (II) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (II) Loading extension XINERAMA (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (II) config/hal: Adding input device Logitech Logitech BT Mini-Receiver (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.2, module version = 2.0.99 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (**) Logitech Logitech BT Mini-Receiver: always reports core events (**) Logitech Logitech BT Mini-Receiver: Device: "/dev/input/event2" (II) Logitech Logitech BT Mini-Receiver: Found x and y relative axes (II) Logitech Logitech BT Mini-Receiver: Found 13 mouse buttons (II) Logitech Logitech BT Mini-Receiver: Found keys (II) Logitech Logitech BT Mini-Receiver: Configuring as mouse (II) Logitech Logitech BT Mini-Receiver: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech Logitech BT Mini-Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Logitech Logitech BT Mini-Receiver: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) Logitech Logitech BT Mini-Receiver: xkb_model: "pc105" (**) Option "xkb_layout" "us" (**) Logitech Logitech BT Mini-Receiver: xkb_layout: "us" (**) Logitech Logitech BT Mini-Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech Logitech BT Mini-Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) config/hal: Adding input device Logitech Logitech BT Mini-Receiver (**) Logitech Logitech BT Mini-Receiver: always reports core events (**) Logitech Logitech BT Mini-Receiver: Device: "/dev/input/event1" (II) Logitech Logitech BT Mini-Receiver: Found keys (II) Logitech Logitech BT Mini-Receiver: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech Logitech BT Mini-Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Logitech Logitech BT Mini-Receiver: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) Logitech Logitech BT Mini-Receiver: xkb_model: "pc105" (**) Option "xkb_layout" "us" (**) Logitech Logitech BT Mini-Receiver: xkb_layout: "us" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Configuring as mouse (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 AUDIT: Sat Oct 25 18:23:13 2008: 11694 X: client 4 rejected from local host ( uid=0 gid=0 pid=11712 ) AUDIT: Sat Oct 25 18:23:13 2008: 11694 X: client 4 rejected from local host ( uid=0 gid=0 pid=11712 ) AUDIT: Sat Oct 25 18:23:20 2008: 11694 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=11717 ) AUDIT: Sat Oct 25 18:23:20 2008: 11694 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=11718 ) AUDIT: Sat Oct 25 18:23:20 2008: 11694 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=11719 ) (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (II) LoadModule: "wacom" (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so (II) Module wacom: vendor="X.Org Foundation" compiled for 4.3.99.902, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (II) Wacom driver level: 47-0.8.1-6 $ (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=12064 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=12064 resol X=2032 resol Y=2032 (**) Option "BottomY" "9396" Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=12064 resol X=2032 resol Y=2032 (**) Option "BottomY" "9396" Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 0-FontSpecific gbk-0 0-FontSpecific gb2312.1980-0 0-FontSpecific gbk-0 0-FontSpecific gb2312.1980-0 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "ScreenNo" "1" (**) Wacom Graphire 6x8 BlueTooth: attached screen number 1 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled Wacom Graphire 6x8 BlueTooth: invalid screen number 1, resetting to default (-1) (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "ScreenNo" "2" (**) Wacom Graphire 6x8 BlueTooth: attached screen number 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled Wacom Graphire 6x8 BlueTooth: invalid screen number 2, resetting to default (-1) (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "ButtonsOnly" "on" (**) Wacom Graphire 6x8 BlueTooth: buttons only (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Option "SendCoreEvents" "false" (**) Wacom Graphire 6x8 BlueTooth: doesn't report core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Option "SendCoreEvents" "false" (**) Wacom Graphire 6x8 BlueTooth: doesn't report core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (WW) Logitech Logitech BT Mini-Receiver: unable to handle keycode 420 (WW) Logitech Logitech BT Mini-Receiver: unable to handle keycode 419 (WW) Logitech Logitech BT Mini-Receiver: unable to handle keycode 418 (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (EE) Logitech Logitech BT Mini-Receiver: Read error: No such device (II) config/hal: removing device Logitech Logitech BT Mini-Receiver (II) Logitech Logitech BT Mini-Receiver: Close (II) UnloadModule: "evdev" (EE) Logitech Logitech BT Mini-Receiver: Read error: No such device (II) config/hal: removing device Logitech Logitech BT Mini-Receiver (II) Logitech Logitech BT Mini-Receiver: Close (II) UnloadModule: "evdev" (II) config/hal: Adding input device Logitech Logitech BT Mini-Receiver (**) Logitech Logitech BT Mini-Receiver: always reports core events (**) Logitech Logitech BT Mini-Receiver: Device: "/dev/input/event1" (II) Logitech Logitech BT Mini-Receiver: Found keys (II) Logitech Logitech BT Mini-Receiver: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech Logitech BT Mini-Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Logitech Logitech BT Mini-Receiver: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) Logitech Logitech BT Mini-Receiver: xkb_model: "pc105" (**) Option "xkb_layout" "us" (**) Logitech Logitech BT Mini-Receiver: xkb_layout: "us" (II) config/hal: Adding input device Logitech Logitech BT Mini-Receiver (**) Logitech Logitech BT Mini-Receiver: always reports core events (**) Logitech Logitech BT Mini-Receiver: Device: "/dev/input/event2" (II) Logitech Logitech BT Mini-Receiver: Found x and y relative axes (II) Logitech Logitech BT Mini-Receiver: Found 13 mouse buttons (II) Logitech Logitech BT Mini-Receiver: Found keys (II) Logitech Logitech BT Mini-Receiver: Configuring as mouse (II) Logitech Logitech BT Mini-Receiver: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech Logitech BT Mini-Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Logitech Logitech BT Mini-Receiver: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) Logitech Logitech BT Mini-Receiver: xkb_model: "pc105" (**) Option "xkb_layout" "us" (**) Logitech Logitech BT Mini-Receiver: xkb_layout: "us" (**) Logitech Logitech BT Mini-Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech Logitech BT Mini-Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Option "SendCoreEvents" "false" (**) Wacom Graphire 6x8 BlueTooth: doesn't report core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom" (II) config/hal: Adding input device Wacom Graphire 6x8 BlueTooth (**) Wacom Graphire 6x8 BlueTooth: always reports core events (**) Wacom Graphire 6x8 BlueTooth device is /dev/input/event6 (**) Wacom Graphire 6x8 BlueTooth is in absolute mode (**) WACOM: suppress value is 2 (**) Option "KeepShape" "on" (**) Wacom Graphire 6x8 BlueTooth: keeps shape (**) Option "TPCButton" "on" (**) /dev/input/event6: Tablet PC buttons on (**) Option "BaudRate" "9600" (**) Wacom Graphire 6x8 BlueTooth: serial speed 9600 (II) XINPUT: Adding extended input device "Wacom Graphire 6x8 BlueTooth" (type: Wacom Stylus) (**) Option "Device" "/dev/input/event6" Wacom Graphire 6x8 BlueTooth Wacom X driver grabbed event device (==) Wacom using pressure threshold of 30 for button 1 (==) Wacom USB Graphire4 tablet speed=9600 (38400) maxX=16704 maxY=12064 maxZ=511 resX=2032 resY=2032 tilt=disabled (==) Wacom device "Wacom Graphire 6x8 BlueTooth" top X=0 top Y=0 bottom X=16704 bottom Y=9396 resol X=2032 resol Y=2032 Error reading wacom device : No such device (II) config/hal: removing device Wacom Graphire 6x8 BlueTooth (II) UnloadModule: "wacom"