[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-8-generic-pae (buildd@rothera) (gcc version 4.6.2 (Ubuntu/Linaro 4.6.2-10ubuntu1) ) #14-Ubuntu SMP Fri Jan 6 03:57:56 UTC 2012 (Ubuntu 3.2.0-8.14-generic-pae 3.2.0) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee2000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3LR/EP45-UD3LR, BIOS F7 08/31/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask FC0000000 write-back [ 0.000000] 5 base 230000000 mask FF0000000 uncachable [ 0.000000] 6 base 0CFF00000 mask FFFF00000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 3328MB, range: 256MB, type UC [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 1GB, type WB [ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC [ 0.000000] reg 6, base: 3327MB, range: 1MB, type UC [ 0.000000] total RAM covered: 8191M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3327MB, range: 1MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 512MB, type WB [ 0.000000] reg 6, base: 8704MB, range: 256MB, type WB [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00f5790] f5790 [ 0.000000] initial memory mapped : 0 - 02000000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000 [ 0.000000] RAMDISK: 36546000 - 3729b000 [ 0.000000] ACPI: RSDP 000f7190 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT cfee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP cfee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT cfee2180 04B3E (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS cfee0000 00040 [ 0.000000] ACPI: HPET cfee6e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG cfee6e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS cfee6ec0 00000 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG cfee7350 066C2 (v01 GBT GBT B0 5455312E BG?? 00020101) [ 0.000000] ACPI: APIC cfee6d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT cfeee340 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 8068MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfee0 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096751 [ 0.000000] free_area_init_node: node 0, pgdat c1865700, node_mem_map f1f46200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 16137 pages used for memmap [ 0.000000] HighMem zone: 1852377 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:24100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7800000 s34176 r0 d23168 u524288 [ 0.000000] pcpu-alloc: s34176 r0 d23168 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2078830 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/sda11 ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 36699904 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00230000) [ 0.000000] Memory: 8254376k/9175040k available (5815k kernel code, 132628k reserved, 2836k data, 740k init, 7474056k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc1873000 - 0xc192c000 ( 740 kB) [ 0.000000] .data : 0xc15adebc - 0xc1872fc0 (2836 kB) [ 0.000000] .text : 0xc1000000 - 0xc15adebc (5815 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2399.673 MHz processor. [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.34 BogoMIPS (lpj=9598692) [ 0.004103] pid_max: default: 32768 minimum: 301 [ 0.004174] Security Framework initialized [ 0.004238] AppArmor: AppArmor initialized [ 0.004288] Yama: becoming mindful. [ 0.004390] Mount-cache hash table entries: 512 [ 0.004576] Initializing cgroup subsys cpuacct [ 0.004631] Initializing cgroup subsys memory [ 0.004688] Initializing cgroup subsys devices [ 0.004738] Initializing cgroup subsys freezer [ 0.004788] Initializing cgroup subsys net_cls [ 0.004838] Initializing cgroup subsys blkio [ 0.004893] Initializing cgroup subsys perf_event [ 0.004968] CPU: Physical Processor ID: 0 [ 0.005017] CPU: Processor Core ID: 0 [ 0.005069] mce: CPU supports 6 MCE banks [ 0.005126] CPU0: Thermal monitoring enabled (TM2) [ 0.005178] using mwait in idle threads. [ 0.009789] ACPI: Core revision 20110623 [ 0.014371] ftrace: allocating 26567 entries in 52 pages [ 0.016045] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.016456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057459] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.060003] PEBS disabled due to CPU errata. [ 0.060003] ... version: 2 [ 0.060003] ... bit width: 40 [ 0.060003] ... generic registers: 2 [ 0.060003] ... value mask: 000000ffffffffff [ 0.060003] ... max period: 000000007fffffff [ 0.060003] ... fixed-purpose events: 3 [ 0.060003] ... event mask: 0000000700000003 [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.060003] CPU 1 irqstacks, hard=f74f2000 soft=f74f4000 [ 0.060003] Booting Node 0, Processors #1 [ 0.060003] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.008000] calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=4280369410 >=post_end=4602786 [ 0.148028] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148301] CPU 2 irqstacks, hard=f7520000 soft=f7522000 [ 0.148304] #2 [ 0.148343] smpboot cpu 2: start_ip = 9b000 [ 0.008000] Initializing CPU#2 [ 0.240034] NMI watchdog enabled, takes one hw-pmu counter. [ 0.240252] CPU 3 irqstacks, hard=f752e000 soft=f7538000 [ 0.240255] #3 Ok. [ 0.240303] smpboot cpu 3: start_ip = 9b000 [ 0.008000] Initializing CPU#3 [ 0.332050] NMI watchdog enabled, takes one hw-pmu counter. [ 0.332183] Brought up 4 CPUs [ 0.332234] Total of 4 processors activated (19199.92 BogoMIPS). [ 0.336210] devtmpfs: initialized [ 0.336223] EVM: security.selinux [ 0.336273] EVM: security.SMACK64 [ 0.336322] EVM: security.capability [ 0.336509] PM: Registering ACPI NVS region at cfee0000 (8192 bytes) [ 0.338119] print_constraints: dummy: [ 0.338196] RTC time: 18:05:43, date: 01/12/12 [ 0.338286] NET: Registered protocol family 16 [ 0.338373] Trying to unpack rootfs image as initramfs... [ 0.338477] EISA bus registered [ 0.338574] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.338639] ACPI: bus type pci registered [ 0.338759] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.338826] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.340025] PCI: Using MMCONFIG for extended config space [ 0.340078] PCI: Using configuration type 1 for base access [ 0.341360] bio: create slab at 0 [ 0.341360] ACPI: Added _OSI(Module Device) [ 0.341360] ACPI: Added _OSI(Processor Device) [ 0.341360] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.341360] ACPI: Added _OSI(Processor Aggregator Device) [ 0.341360] ACPI: EC: Look up EC in DSDT [ 0.347404] ACPI Warning: Incorrect checksum in table [TAMG] - 0x13, should be 0x12 (20110623/tbutils-314) [ 0.347713] ACPI: SSDT cfeeda60 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.348100] ACPI: Dynamic OEM Table Load: [ 0.348226] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.348508] ACPI: SSDT cfeedf20 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.350406] ACPI: Dynamic OEM Table Load: [ 0.350529] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.350812] ACPI: SSDT cfeee080 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.351175] ACPI: Dynamic OEM Table Load: [ 0.351299] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.351579] ACPI: SSDT cfeee1e0 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.351941] ACPI: Dynamic OEM Table Load: [ 0.352068] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.352374] ACPI: Interpreter enabled [ 0.352438] ACPI: (supports S0 S3 S4 S5) [ 0.352655] ACPI: Using IOAPIC for interrupt routing [ 0.357868] ACPI: No dock devices found. [ 0.357921] HEST: Table not found. [ 0.357974] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.358100] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.358281] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.358336] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.358390] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.358452] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.358515] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff] [ 0.358589] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600 [ 0.358632] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604 [ 0.358667] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.358671] pci 0000:00:01.0: PME# disabled [ 0.358711] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 0.358755] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f] [ 0.358801] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 0.358845] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f] [ 0.358889] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 0.358933] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f] [ 0.358981] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 0.358999] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff] [ 0.359082] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 0.359098] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit] [ 0.359154] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.359158] pci 0000:00:1b.0: PME# disabled [ 0.359179] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 0.359235] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.359240] pci 0000:00:1c.0: PME# disabled [ 0.359265] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 0.359321] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.359325] pci 0000:00:1c.4: PME# disabled [ 0.359347] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604 [ 0.359403] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.359407] pci 0000:00:1c.5: PME# disabled [ 0.359432] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 0.359476] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f] [ 0.359520] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 0.359564] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f] [ 0.359610] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 0.359653] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f] [ 0.359702] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 0.359719] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff] [ 0.359798] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.359855] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 0.359937] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.360001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.360064] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101 [ 0.360080] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.360088] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.360097] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.360105] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.360114] pci 0000:00:1f.2: reg 20: [io 0xf900-0xf90f] [ 0.360122] pci 0000:00:1f.2: reg 24: [io 0xf800-0xf80f] [ 0.360160] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 0.360176] pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit] [ 0.360198] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.360231] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101 [ 0.360247] pci 0000:00:1f.5: reg 10: [io 0xf600-0xf607] [ 0.360255] pci 0000:00:1f.5: reg 14: [io 0xf500-0xf503] [ 0.360263] pci 0000:00:1f.5: reg 18: [io 0xf400-0xf407] [ 0.360272] pci 0000:00:1f.5: reg 1c: [io 0xf300-0xf303] [ 0.360280] pci 0000:00:1f.5: reg 20: [io 0xf200-0xf20f] [ 0.360289] pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f] [ 0.360361] pci 0000:01:00.0: [10de:0a20] type 0 class 0x000300 [ 0.360373] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.360385] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.360396] pci 0000:01:00.0: reg 1c: [mem 0xee000000-0xefffffff 64bit pref] [ 0.360405] pci 0000:01:00.0: reg 24: [io 0xbf00-0xbf7f] [ 0.360413] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.360459] pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403 [ 0.360470] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff] [ 0.360556] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.360610] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.360614] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.360618] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref] [ 0.360659] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.360777] pci 0000:03:00.0: [197b:2368] type 0 class 0x000101 [ 0.360808] pci 0000:03:00.0: reg 10: [io 0xef00-0xef07] [ 0.360823] pci 0000:03:00.0: reg 14: [io 0xee00-0xee03] [ 0.360838] pci 0000:03:00.0: reg 18: [io 0xed00-0xed07] [ 0.360852] pci 0000:03:00.0: reg 1c: [io 0xec00-0xec03] [ 0.360867] pci 0000:03:00.0: reg 20: [io 0xeb00-0xeb0f] [ 0.360961] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.361036] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.361091] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.361095] pci 0000:00:1c.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.361158] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200 [ 0.361175] pci 0000:04:00.0: reg 10: [io 0xde00-0xdeff] [ 0.361205] pci 0000:04:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref] [ 0.361224] pci 0000:04:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref] [ 0.361237] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.361277] pci 0000:04:00.0: supports D1 D2 [ 0.361279] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.361285] pci 0000:04:00.0: PME# disabled [ 0.368042] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 0.368096] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.368101] pci 0000:00:1c.5: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.368107] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.368140] pci 0000:05:00.0: [1106:3044] type 0 class 0x000c00 [ 0.368159] pci 0000:05:00.0: reg 10: [mem 0xfdcff000-0xfdcff7ff] [ 0.368170] pci 0000:05:00.0: reg 14: [io 0xcf00-0xcf7f] [ 0.368232] pci 0000:05:00.0: supports D2 [ 0.368234] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.368239] pci 0000:05:00.0: PME# disabled [ 0.368287] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.368343] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.368347] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.368354] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.368357] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.368360] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.368363] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.368366] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) [ 0.368387] pci_bus 0000:00: on NUMA node 0 [ 0.368391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.368601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.368656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.368715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.368761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.368884] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.368938] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.369010] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.380399] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.380987] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.381591] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.382175] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.382758] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.383339] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.383919] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.384494] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.385164] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.385164] vgaarb: loaded [ 0.385164] vgaarb: bridge control possible 0000:01:00.0 [ 0.385164] i2c-core: driver [aat2870] using legacy suspend method [ 0.385164] i2c-core: driver [aat2870] using legacy resume method [ 0.385164] SCSI subsystem initialized [ 0.385164] libata version 3.00 loaded. [ 0.385164] usbcore: registered new interface driver usbfs [ 0.385164] usbcore: registered new interface driver hub [ 0.385164] usbcore: registered new device driver usb [ 0.385164] PCI: Using ACPI for IRQ routing [ 0.385564] PCI: pci_cache_line_size set to 64 bytes [ 0.385662] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.385665] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff [ 0.385775] NetLabel: Initializing [ 0.385826] NetLabel: domain hash size = 128 [ 0.388029] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.388089] NetLabel: unlabeled traffic allowed by default [ 0.388169] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.388169] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.388366] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.400264] Switching to clocksource hpet [ 0.409047] AppArmor: AppArmor Filesystem Enabled [ 0.409131] pnp: PnP ACPI init [ 0.409198] ACPI: bus type pnp registered [ 0.409343] pnp 00:00: [bus 00-3f] [ 0.409346] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.409349] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.409352] pnp 00:00: [io 0x0d00-0xffff window] [ 0.409354] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.409357] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.409360] pnp 00:00: [mem 0xcff00000-0xfebfffff window] [ 0.409425] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.409515] pnp 00:01: [io 0x0010-0x001f] [ 0.409517] pnp 00:01: [io 0x0022-0x003f] [ 0.409519] pnp 00:01: [io 0x0044-0x005f] [ 0.409522] pnp 00:01: [io 0x0062-0x0063] [ 0.409524] pnp 00:01: [io 0x0065-0x006f] [ 0.409526] pnp 00:01: [io 0x0074-0x007f] [ 0.409528] pnp 00:01: [io 0x0091-0x0093] [ 0.409530] pnp 00:01: [io 0x00a2-0x00bf] [ 0.409532] pnp 00:01: [io 0x00e0-0x00ef] [ 0.409535] pnp 00:01: [io 0x04d0-0x04d1] [ 0.409537] pnp 00:01: [io 0x0290-0x029f] [ 0.409539] pnp 00:01: [io 0x0800-0x087f] [ 0.409541] pnp 00:01: [io 0x0290-0x0294] [ 0.409543] pnp 00:01: [io 0x0880-0x088f] [ 0.409626] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.409680] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.409733] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.409786] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.409840] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.409893] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.409907] pnp 00:02: [dma 4] [ 0.409909] pnp 00:02: [io 0x0000-0x000f] [ 0.409911] pnp 00:02: [io 0x0080-0x0090] [ 0.409914] pnp 00:02: [io 0x0094-0x009f] [ 0.409916] pnp 00:02: [io 0x00c0-0x00df] [ 0.409951] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.410003] pnp 00:03: [irq 0 disabled] [ 0.410015] pnp 00:03: [irq 8] [ 0.410017] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.410059] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.410088] pnp 00:04: [io 0x0070-0x0073] [ 0.410125] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.410135] pnp 00:05: [io 0x0061] [ 0.410170] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.410181] pnp 00:06: [io 0x00f0-0x00ff] [ 0.410186] pnp 00:06: [irq 13] [ 0.410225] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.410343] pnp 00:07: [io 0x03f0-0x03f5] [ 0.410346] pnp 00:07: [io 0x03f7] [ 0.410351] pnp 00:07: [irq 6] [ 0.410353] pnp 00:07: [dma 2] [ 0.410404] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.410566] pnp 00:08: [io 0x03f8-0x03ff] [ 0.410572] pnp 00:08: [irq 4] [ 0.410643] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.410837] pnp 00:09: [io 0x0378-0x037f] [ 0.410843] pnp 00:09: [irq 7] [ 0.410902] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.411022] pnp 00:0a: [io 0x0400-0x04cf] [ 0.411024] pnp 00:0a: [io 0x04d2-0x04ff] [ 0.411088] system 00:0a: [io 0x0400-0x04cf] has been reserved [ 0.411144] system 00:0a: [io 0x04d2-0x04ff] has been reserved [ 0.411199] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.411406] pnp 00:0b: [mem 0xf4000000-0xf7ffffff] [ 0.411484] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.411539] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.411708] pnp 00:0c: [mem 0x000ce400-0x000cffff] [ 0.411711] pnp 00:0c: [mem 0x000f0000-0x000f7fff] [ 0.411714] pnp 00:0c: [mem 0x000f8000-0x000fbfff] [ 0.411716] pnp 00:0c: [mem 0x000fc000-0x000fffff] [ 0.411718] pnp 00:0c: [mem 0xcfee0000-0xcfefffff] [ 0.411721] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.411723] pnp 00:0c: [mem 0x00100000-0xcfedffff] [ 0.411725] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.411727] pnp 00:0c: [mem 0xfed10000-0xfed1dfff] [ 0.411730] pnp 00:0c: [mem 0xfed20000-0xfed8ffff] [ 0.411732] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.411734] pnp 00:0c: [mem 0xffb00000-0xffb7ffff] [ 0.411737] pnp 00:0c: [mem 0xfff00000-0xffffffff] [ 0.411739] pnp 00:0c: [mem 0x000e0000-0x000effff] [ 0.411823] system 00:0c: [mem 0x000ce400-0x000cffff] has been reserved [ 0.411879] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.411934] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.411988] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.412064] system 00:0c: [mem 0xcfee0000-0xcfefffff] could not be reserved [ 0.412119] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.412173] system 00:0c: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.412228] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.412283] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.412336] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.412391] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.412444] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.412499] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved [ 0.412553] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved [ 0.412607] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.412628] pnp 00:0d: [mem 0xffb80000-0xffbfffff] [ 0.412685] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active) [ 0.412692] pnp: PnP ACPI: found 14 devices [ 0.412742] ACPI: ACPI bus type pnp unregistered [ 0.412797] PnPBIOS: Disabled by ACPI PNP [ 0.451203] PCI: max bus depth: 1 pci_try_num: 2 [ 0.451255] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.451322] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff] [ 0.451377] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.451444] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.451499] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe007ffff pref] [ 0.451563] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.451615] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.451669] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.451724] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref] [ 0.451791] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.451844] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.451899] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff] [ 0.451954] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.452036] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.452090] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.452145] pci 0000:00:1c.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.452200] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.452269] pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref] [ 0.452332] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 0.452386] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.452442] pci 0000:00:1c.5: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.452497] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.452565] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.452617] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.452673] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.452747] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.452805] pci 0000:00:01.0: setting latency timer to 64 [ 0.452812] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.452866] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.452923] pci 0000:00:1c.0: setting latency timer to 64 [ 0.452929] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.452985] pci 0000:00:1c.4: setting latency timer to 64 [ 0.452995] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.453051] pci 0000:00:1c.5: setting latency timer to 64 [ 0.453059] pci 0000:00:1e.0: setting latency timer to 64 [ 0.453063] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.453066] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.453068] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.453071] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.453073] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.453076] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.453079] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.453082] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref] [ 0.453084] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.453087] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf03fffff] [ 0.453090] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.453092] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.453095] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.453098] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.453100] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.453103] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.453106] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.453109] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.453111] pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.453114] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.453116] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.453119] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.453122] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.453124] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.453170] NET: Registered protocol family 2 [ 0.453298] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.453600] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.454042] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.454289] TCP: Hash tables configured (established 131072 bind 65536) [ 0.454342] TCP reno registered [ 0.454393] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.454454] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.454586] NET: Registered protocol family 1 [ 0.454806] pci 0000:01:00.0: Boot video device [ 0.454826] PCI: CLS 4 bytes, default 64 [ 0.455355] audit: initializing netlink socket (disabled) [ 0.455417] type=2000 audit(1326391543.448:1): initialized [ 0.491944] highmem bounce pool size: 64 pages [ 0.492002] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.518896] VFS: Disk quotas dquot_6.5.2 [ 0.519028] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.519730] fuse init (API version 7.17) [ 0.519893] msgmni has been set to 1524 [ 0.520560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.520673] io scheduler noop registered [ 0.520731] io scheduler deadline registered [ 0.520787] io scheduler cfq registered (default) [ 0.520970] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.521004] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.521056] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.521094] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.521156] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.521194] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.521255] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.521292] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.521378] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.521456] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.521611] intel_idle: MWAIT substates: 0x20 [ 0.521613] intel_idle: does not run on family 6 model 15 [ 0.521698] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.521765] ACPI: Power Button [PWRB] [ 0.521875] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.521939] ACPI: Power Button [PWRF] [ 0.522045] Marking TSC unstable due to TSC halts in idle [ 0.522101] ACPI: acpi_idle registered with cpuidle [ 0.525568] ERST: Table is not found! [ 0.525618] GHES: HEST is not enabled! [ 0.527249] isapnp: Scanning for PnP cards... [ 0.527273] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.547659] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.678585] Freeing initrd memory: 13652k freed [ 0.880490] isapnp: No Plug & Play device found [ 0.907040] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.940435] Linux agpgart interface v0.103 [ 0.942932] brd: module loaded [ 0.944178] loop: module loaded [ 0.944428] ata_piix 0000:00:1f.2: version 2.13 [ 0.944455] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.944512] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.944785] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.945148] scsi0 : ata_piix [ 0.945311] scsi1 : ata_piix [ 0.945991] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 0.946048] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 0.946123] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.946198] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.946461] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.946735] scsi2 : ata_piix [ 0.946887] scsi3 : ata_piix [ 0.947395] ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19 [ 0.947450] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19 [ 0.947570] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.947688] pata_acpi 0000:03:00.0: setting latency timer to 64 [ 0.947703] pata_acpi 0000:03:00.0: PCI INT A disabled [ 0.948145] Fixed MDIO Bus: probed [ 0.948215] tun: Universal TUN/TAP device driver, 1.6 [ 0.948266] tun: (C) 1999-2004 Max Krasnyansky [ 0.948400] arcnet loaded. [ 0.948449] PPP generic driver version 2.4.2 [ 0.948650] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.948727] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.948789] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.948793] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.948918] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.952885] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported [ 0.952900] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000 [ 0.968023] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.968267] hub 1-0:1.0: USB hub found [ 0.968319] hub 1-0:1.0: 6 ports detected [ 0.968456] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.968517] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.968520] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.968638] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.972600] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported [ 0.972614] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000 [ 0.988023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.988250] hub 2-0:1.0: USB hub found [ 0.988302] hub 2-0:1.0: 6 ports detected [ 0.988433] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.988499] uhci_hcd: USB Universal Host Controller Interface driver [ 0.988566] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.988623] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.988626] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.988752] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.988850] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.989069] hub 3-0:1.0: USB hub found [ 0.989122] hub 3-0:1.0: 2 ports detected [ 0.989248] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.989304] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.989307] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.989436] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.989533] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.989751] hub 4-0:1.0: USB hub found [ 0.989802] hub 4-0:1.0: 2 ports detected [ 0.989927] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.989984] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.989987] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.990108] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.990197] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 0.990414] hub 5-0:1.0: USB hub found [ 0.990466] hub 5-0:1.0: 2 ports detected [ 0.990583] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.990640] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.990643] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.990767] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.990856] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.991071] hub 6-0:1.0: USB hub found [ 0.991122] hub 6-0:1.0: 2 ports detected [ 0.991241] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.991298] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.991301] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.991421] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.991509] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.991726] hub 7-0:1.0: USB hub found [ 0.991777] hub 7-0:1.0: 2 ports detected [ 0.991895] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.991952] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.991956] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.992087] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.992189] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.992412] hub 8-0:1.0: USB hub found [ 0.992463] hub 8-0:1.0: 2 ports detected [ 0.992660] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.993136] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.993197] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.993439] mousedev: PS/2 mouse device common for all mice [ 0.993740] rtc_cmos 00:04: RTC can wake from S4 [ 0.993929] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.994003] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.994116] device-mapper: uevent: version 1.0.3 [ 0.994272] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.994379] EISA: Probing bus 0 at eisa.0 [ 0.994429] EISA: Cannot allocate resource for mainboard [ 0.994480] Cannot allocate resource for EISA slot 1 [ 0.994530] Cannot allocate resource for EISA slot 2 [ 0.994582] Cannot allocate resource for EISA slot 3 [ 0.994632] Cannot allocate resource for EISA slot 4 [ 0.994682] Cannot allocate resource for EISA slot 5 [ 0.994732] Cannot allocate resource for EISA slot 6 [ 0.994782] Cannot allocate resource for EISA slot 7 [ 0.994833] Cannot allocate resource for EISA slot 8 [ 0.994882] EISA: Detected 0 cards. [ 0.994939] cpufreq-nforce2: No nForce2 chipset. [ 0.995061] cpuidle: using governor ladder [ 0.995230] cpuidle: using governor menu [ 0.995280] EFI Variables Facility v0.08 2004-May-17 [ 0.995621] TCP cubic registered [ 0.995807] NET: Registered protocol family 10 [ 0.996473] NET: Registered protocol family 17 [ 0.996538] Registering the dns_resolver key type [ 0.996607] Using IPI No-Shortcut mode [ 0.996818] PM: Hibernation image not present or could not be loaded. [ 0.996835] registered taskstats version 1 [ 1.017043] Magic number: 12:292:89 [ 1.017193] rtc_cmos 00:04: setting system clock to 2012-01-12 18:05:44 UTC (1326391544) [ 1.023063] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.023119] EDD information not available. [ 1.274721] ata4: SATA link down (SStatus 0 SControl 300) [ 1.336022] usb 1-2: new high-speed USB device number 3 using ehci_hcd [ 1.420056] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.455545] ata3.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 [ 1.455603] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.468667] hub 1-2:1.0: USB hub found [ 1.468863] hub 1-2:1.0: 7 ports detected [ 1.511613] ata3.00: configured for UDMA/133 [ 1.580031] usb 1-4: new high-speed USB device number 4 using ehci_hcd [ 1.740087] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.740160] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.744086] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.744159] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.756337] ata2.00: ATA-8: ST31500541AS, CC34, max UDMA/133 [ 1.756395] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.756460] ata2.01: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100 [ 1.761063] ata1.00: ATA-8: WDC WD20EURS-63S48Y0, 51.0AB51, max UDMA/133 [ 1.761122] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.761187] ata1.01: ATAPI: HL-DT-STDVD-ROM GDRH20N, 0L02, max UDMA/100 [ 1.769027] ata1.00: configured for UDMA/133 [ 1.772348] ata2.00: configured for UDMA/133 [ 1.784143] ata1.01: configured for UDMA/100 [ 1.785437] scsi 0:0:0:0: Direct-Access ATA WDC WD20EURS-63S 51.0 PQ: 0 ANSI: 5 [ 1.785637] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.785662] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.785752] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.787209] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDRH20N 0L02 PQ: 0 ANSI: 5 [ 1.787214] sd 0:0:0:0: [sda] Write Protect is off [ 1.787219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.787250] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.788211] ata2.01: configured for UDMA/100 [ 1.788981] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 1.789038] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.789216] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.789299] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.789519] scsi 1:0:0:0: Direct-Access ATA ST31500541AS CC34 PQ: 0 ANSI: 5 [ 1.789719] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.789776] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 1.790275] sd 1:0:0:0: [sdb] Write Protect is off [ 1.790346] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.790562] scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5 [ 1.790567] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.793187] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.793376] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.793442] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.793637] scsi 2:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 [ 1.793810] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.795414] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 1.795438] sd 2:0:0:0: [sdc] Write Protect is off [ 1.795441] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.795463] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.808429] sdc: sdc1 [ 1.808686] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.824030] usb 1-5: new high-speed USB device number 5 using ehci_hcd [ 1.866595] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 > [ 1.867213] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.903720] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda4 [ 1.904560] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.904712] Freeing unused kernel memory: 740k freed [ 1.905004] Write protecting the kernel text: 5816k [ 1.905086] Write protecting the kernel read-only data: 2380k [ 1.905142] NX-protecting the kernel data: 4424k [ 1.923394] udevd[104]: starting version 175 [ 1.957793] hub 1-5:1.0: USB hub found [ 1.958107] hub 1-5:1.0: 4 ports detected [ 1.960654] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.960756] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 1.961229] scsi4 : pata_jmicron [ 1.961463] scsi5 : pata_jmicron [ 1.962153] ata5: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 [ 1.962212] ata6: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 16 [ 1.971820] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.971901] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.971988] r8169 0000:04:00.0: setting latency timer to 64 [ 1.972102] r8169 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.972678] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf840c000, 00:24:1d:dd:fc:6a, XID 1c4000c0 IRQ 44 [ 1.972747] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 1.976399] Floppy drive(s): fd0 is 1.44M [ 1.999814] FDC 0 is a post-1991 82077 [ 2.264047] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 2.277778] firewire_ohci 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.340216] firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x11 [ 2.465535] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2 [ 2.465817] generic-usb 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.0-1/input0 [ 2.465927] usbcore: registered new interface driver usbhid [ 2.465982] usbhid: USB HID core driver [ 2.684030] usb 8-1: new low-speed USB device number 2 using uhci_hcd [ 2.840151] firewire_core: created device fw0: GUID 001106000000ea33, S400 [ 2.885800] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3 [ 2.885966] generic-usb 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.2-1/input0 [ 2.904945] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4 [ 2.905129] generic-usb 0003:0518:0001.0003: input,hidraw2: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.2-1/input1 [ 2.992119] usb 1-2.1: new full-speed USB device number 6 using ehci_hcd [ 3.168123] usb 1-2.2: new high-speed USB device number 7 using ehci_hcd [ 3.201500] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null) [ 3.332374] usb 1-5.1: new high-speed USB device number 8 using ehci_hcd [ 19.597886] udevd[333]: starting version 175 [ 19.631711] lp: driver loaded but no devices found [ 19.661272] Disabling lock debugging due to kernel taint [ 19.661281] nvidia: module license 'NVIDIA' taints kernel. [ 19.672470] parport_pc 00:09: reported by Plug and Play ACPI [ 19.672525] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 19.725009] type=1400 audit(1326387963.205:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=497 comm="apparmor_parser" [ 19.725414] type=1400 audit(1326387963.205:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=497 comm="apparmor_parser" [ 19.725674] type=1400 audit(1326387963.205:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=497 comm="apparmor_parser" [ 19.762625] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 19.762676] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 19.762704] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 19.777004] lp0: using parport0 (interrupt-driven). [ 19.810451] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.810456] hda_intel: Disabling MSI [ 19.810486] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 19.873570] ppdev: user-space parallel port driver [ 19.954358] IR NEC protocol handler initialized [ 19.955820] dib0700: loaded with support for 21 different device-types [ 19.957184] IR RC5(x) protocol handler initialized [ 19.957276] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. [ 19.957413] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 19.959452] IR RC6 protocol handler initialized [ 19.961784] DVB: registering new adapter (Hauppauge Nova-T Stick) [ 19.963314] IR JVC protocol handler initialized [ 19.968124] IR Sony protocol handler initialized [ 19.969725] IR MCE Keyboard/mouse protocol handler initialized [ 19.972747] lirc_dev: IR Remote Control driver registered, major 249 [ 19.972941] IR LIRC bridge handler initialized [ 20.168618] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... [ 20.379120] DiB0070: successfully identified [ 20.404026] Registered IR keymap rc-dib0700-rc5 [ 20.404159] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc0/input5 [ 20.404211] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc0 [ 20.404363] dvb-usb: schedule remote query interval to 50 msecs. [ 20.404367] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. [ 20.405339] dib0700: rc submit urb failed [ 20.405340] [ 20.405641] usbcore: registered new interface driver dvb_usb_dib0700 [ 20.613701] Adding 6144824k swap on /dev/sda8. Priority:-1 extents:1 across:6144824k [ 20.716112] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 20.748038] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 20.780033] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 20.797046] usbcore: registered new interface driver uas [ 20.812029] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 20.828218] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6 [ 20.828336] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7 [ 20.828440] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8 [ 20.828551] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9 [ 20.829332] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.829343] nvidia 0000:01:00.0: setting latency timer to 64 [ 20.829348] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 20.829484] NVRM: loading NVIDIA UNIX x86 Kernel Module 285.05.09 Fri Sep 23 18:53:08 PDT 2011 [ 21.041951] Initializing USB Mass Storage driver... [ 21.042144] scsi6 : usb-storage 1-2.2:1.0 [ 21.042489] usb-storage 1-5.1:1.0: Quirks match for vid 152d pid 2329: 8020 [ 21.042528] scsi7 : usb-storage 1-5.1:1.0 [ 21.042655] usbcore: registered new interface driver usb-storage [ 21.042658] USB Mass Storage support registered. [ 22.040649] scsi 7:0:0:0: Direct-Access ST950032 5AS PQ: 0 ANSI: 2 CCS [ 22.040774] scsi 6:0:0:0: Direct-Access WD 800BEVSExternal 1.02 PQ: 0 ANSI: 0 [ 22.041349] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 22.041666] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 22.043962] sd 7:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 22.044756] sd 7:0:0:0: [sdd] Write Protect is off [ 22.044760] sd 7:0:0:0: [sdd] Mode Sense: 34 00 00 00 [ 22.045507] sd 7:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 22.046112] sd 6:0:0:0: [sde] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 22.046758] sd 6:0:0:0: [sde] Write Protect is off [ 22.046763] sd 6:0:0:0: [sde] Mode Sense: 00 00 00 00 [ 22.047636] sd 6:0:0:0: [sde] Asking for cache data failed [ 22.047695] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 22.048822] sdd: sdd1 [ 22.050259] sd 6:0:0:0: [sde] Asking for cache data failed [ 22.050319] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 22.051754] sd 7:0:0:0: [sdd] Attached SCSI disk [ 22.479852] EXT4-fs (sda11): re-mounted. Opts: errors=remount-ro [ 22.856593] init: udev-fallback-graphics main process (967) terminated with status 1 [ 23.367611] EXT4-fs (sdb2): warning: maximal mount count reached, running e2fsck is recommended [ 23.370533] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 23.623721] kjournald starting. Commit interval 5 seconds [ 23.623862] EXT3-fs (sdb8): warning: maximal mount count reached, running e2fsck is recommended [ 23.624151] EXT3-fs (sdb8): using internal journal [ 23.624157] EXT3-fs (sdb8): mounted filesystem with ordered data mode [ 23.703389] type=1400 audit(1326387967.181:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1059 comm="apparmor_parser" [ 23.703901] type=1400 audit(1326387967.181:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1059 comm="apparmor_parser" [ 23.725844] type=1400 audit(1326387967.205:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1069 comm="apparmor_parser" [ 23.726207] type=1400 audit(1326387967.205:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1070 comm="apparmor_parser" [ 23.726708] type=1400 audit(1326387967.205:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1070 comm="apparmor_parser" [ 23.726969] type=1400 audit(1326387967.205:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1070 comm="apparmor_parser" [ 23.729236] type=1400 audit(1326387967.209:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1075 comm="apparmor_parser" [ 23.730712] r8169 0000:04:00.0: eth0: link down [ 23.730721] r8169 0000:04:00.0: eth0: link down [ 23.730927] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.837017] Bluetooth: Core ver 2.16 [ 23.837040] NET: Registered protocol family 31 [ 23.837042] Bluetooth: HCI device and connection manager initialized [ 23.837045] Bluetooth: HCI socket layer initialized [ 23.837047] Bluetooth: L2CAP socket layer initialized [ 23.837095] Bluetooth: SCO socket layer initialized [ 23.841978] init: failsafe main process (1004) killed by TERM signal [ 23.858203] Bluetooth: RFCOMM TTY layer initialized [ 23.858210] Bluetooth: RFCOMM socket layer initialized [ 23.858212] Bluetooth: RFCOMM ver 1.11 [ 24.449219] sde: sde1 [ 24.454159] sd 6:0:0:0: [sde] Asking for cache data failed [ 24.454164] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 24.454168] sd 6:0:0:0: [sde] Attached SCSI disk [ 24.458326] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.458330] Bluetooth: BNEP filters: protocol multicast [ 24.533244] vboxdrv: Found 4 processor cores. [ 24.533407] vboxdrv: fAsync=0 offMin=0x2be offMax=0x1a5e [ 24.533467] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 24.533469] vboxdrv: Successfully loaded version 4.1.8_Ubuntu (interface 0x00190000). [ 24.544635] vboxpci: IOMMU not found (not registered) [ 25.355157] r8169 0000:04:00.0: eth0: link up [ 25.355319] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 26.423939] audit_printk_skb: 27 callbacks suppressed [ 26.423943] type=1400 audit(1326387969.901:21): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/cupsd" name="/etc/pkcs11/modules/" pid=1060 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 30.393634] compiz[2008]: segfault at 0 ip b601be8c sp bfd4acbc error 4 in glyKH2ZA (deleted)[b601a000+2000] [ 36.280012] eth0: no IPv6 routers present [ 71.818101] compiz[2199]: segfault at 0 ip b5ff1e8c sp bfad778c error 4 in glm7t3XT (deleted)[b5ff0000+2000]