[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-8-generic (buildd@crested) (gcc version 4.6.2 (Ubuntu/Linaro 4.6.2-10ubuntu1) ) #15-Ubuntu SMP Wed Jan 11 13:57:44 UTC 2012 (Ubuntu 3.2.0-8.15-generic 3.2.0) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-8-generic root=UUID=5a228935-6274-43d8-aa30-4f2fbba231e0 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) [ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv9500 Notebook PC /30CB, BIOS F.5A 03/22/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x7fed0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC [ 0.000000] total RAM covered: 2047M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC [ 0.000000] found SMP MP-table at [ffff8800000f8520] f8520 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fed0000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fed0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fed0000 @ 1fffc000-20000000 [ 0.000000] RAMDISK: 35980000 - 36cb8000 [ 0.000000] ACPI: RSDP 00000000000f8480 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 000000007fed5b05 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 000000007fedfc6c 000F4 (v03 HP 30CC 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 000000007fed6fe8 08C10 (v01 HP 30CB 06040000 INTL 20061109) [ 0.000000] ACPI: FACS 000000007fee2fc0 00040 [ 0.000000] ACPI: HPET 000000007fedfd60 00038 (v01 HP 30CB 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 000000007fedfd98 0003C (v01 HP 30CB 06040000 LOHR 0000005A) [ 0.000000] ACPI: TMOR 000000007fedfdd4 00026 (v01 HP 30CC 06040000 PTL 00000003) [ 0.000000] ACPI: APIC 000000007fedfdfa 00068 (v01 HP 30CB 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 000000007fedfe62 00028 (v01 HP 30CB 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 000000007fedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 000000007fed6d0b 002DD (v01 HP 30CB 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 000000007fed610d 0025F (v01 HP 30CB 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 000000007fed6067 000A6 (v01 HP 30CB 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 000000007fed5b81 004E6 (v01 HP 30CB 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fed0000 [ 0.000000] Initmem setup node 0 0000000000000000-000000007fed0000 [ 0.000000] NODE_DATA [000000007fecb000 - 000000007fecffff] [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fed0 [ 0.000000] On node 0 totalpages: 523871 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8124 pages used for memmap [ 0.000000] DMA32 zone: 511764 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83008 r8192 d23488 u1048576 [ 0.000000] pcpu-alloc: s83008 r8192 d23488 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515678 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-8-generic root=UUID=5a228935-6274-43d8-aa30-4f2fbba231e0 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2027000k/2095936k available (6521k kernel code, 452k absent, 68484k reserved, 6672k data, 916k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2194.884 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.76 BogoMIPS (lpj=8779536) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004036] Security Framework initialized [ 0.004056] AppArmor: AppArmor initialized [ 0.004058] Yama: becoming mindful. [ 0.004281] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005416] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.005959] Mount-cache hash table entries: 256 [ 0.006114] Initializing cgroup subsys cpuacct [ 0.006120] Initializing cgroup subsys memory [ 0.006129] Initializing cgroup subsys devices [ 0.006131] Initializing cgroup subsys freezer [ 0.006133] Initializing cgroup subsys net_cls [ 0.006136] Initializing cgroup subsys blkio [ 0.006143] Initializing cgroup subsys perf_event [ 0.006178] CPU: Physical Processor ID: 0 [ 0.006180] CPU: Processor Core ID: 0 [ 0.006182] mce: CPU supports 6 MCE banks [ 0.006190] CPU0: Thermal monitoring enabled (TM2) [ 0.006196] using mwait in idle threads. [ 0.010021] ACPI: Core revision 20110623 [ 0.016014] ftrace: allocating 26833 entries in 106 pages [ 0.020473] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063364] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.064003] PEBS disabled due to CPU errata. [ 0.064003] ... version: 2 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 3 [ 0.064003] ... event mask: 0000000700000003 [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] Booting Node 0, Processors #1 Ok. [ 0.064003] smpboot cpu 1: start_ip = 9a000 [ 0.152042] NMI watchdog enabled, takes one hw-pmu counter. [ 0.152086] Brought up 2 CPUs [ 0.152089] Total of 2 processors activated (8779.27 BogoMIPS). [ 0.154051] devtmpfs: initialized [ 0.154051] EVM: security.selinux [ 0.154051] EVM: security.SMACK64 [ 0.154051] EVM: security.capability [ 0.154051] PM: Registering ACPI NVS region at 7fed0000 (77824 bytes) [ 0.156614] print_constraints: dummy: [ 0.156649] RTC time: 13:41:26, date: 01/12/12 [ 0.156684] NET: Registered protocol family 16 [ 0.156803] Trying to unpack rootfs image as initramfs... [ 0.156833] ACPI: bus type pci registered [ 0.156899] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.156902] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.189772] PCI: Using configuration type 1 for base access [ 0.192250] bio: create slab at 0 [ 0.192250] ACPI: Added _OSI(Module Device) [ 0.192250] ACPI: Added _OSI(Processor Device) [ 0.192250] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.192250] ACPI: Added _OSI(Processor Aggregator Device) [ 0.193554] ACPI: EC: Look up EC in DSDT [ 0.193717] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 0.193723] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88007bf2da78), AE_NOT_FOUND (20110623/psparse-536) [ 0.195791] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.196759] ACPI: SSDT 000000007fed69c9 0027A (v01 HP 30CB 00003000 INTL 20061109) [ 0.197080] ACPI: Dynamic OEM Table Load: [ 0.197083] ACPI: SSDT (null) 0027A (v01 HP 30CB 00003000 INTL 20061109) [ 0.197192] ACPI: SSDT 000000007fed636c 005D8 (v01 HP 30CB 00003001 INTL 20061109) [ 0.197499] ACPI: Dynamic OEM Table Load: [ 0.197502] ACPI: SSDT (null) 005D8 (v01 HP 30CB 00003001 INTL 20061109) [ 0.197700] ACPI: SSDT 000000007fed6c43 000C8 (v01 HP 30CB 00003000 INTL 20061109) [ 0.198016] ACPI: Dynamic OEM Table Load: [ 0.198019] ACPI: SSDT (null) 000C8 (v01 HP 30CB 00003000 INTL 20061109) [ 0.198095] ACPI: SSDT 000000007fed6944 00085 (v01 HP 30CB 00003000 INTL 20061109) [ 0.198403] ACPI: Dynamic OEM Table Load: [ 0.198406] ACPI: SSDT (null) 00085 (v01 HP 30CB 00003000 INTL 20061109) [ 0.198669] ACPI: Interpreter enabled [ 0.198673] ACPI: (supports S0 S3 S4 S5) [ 0.198691] ACPI: Using IOAPIC for interrupt routing [ 0.205125] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.205125] ACPI: No dock devices found. [ 0.205125] HEST: Table not found. [ 0.205125] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.205125] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.205680] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.205683] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.205685] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.205688] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.205691] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.205693] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.205696] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] [ 0.205699] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.205714] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.205764] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604 [ 0.205799] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.205803] pci 0000:00:01.0: PME# disabled [ 0.205862] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.205921] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f] [ 0.205965] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.206024] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f] [ 0.206082] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.206108] pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff] [ 0.206204] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.206210] pci 0000:00:1a.7: PME# disabled [ 0.206243] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.206266] pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit] [ 0.206354] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.206360] pci 0000:00:1b.0: PME# disabled [ 0.206389] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.206480] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.206484] pci 0000:00:1c.0: PME# disabled [ 0.206518] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.206609] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.206614] pci 0000:00:1c.1: PME# disabled [ 0.206651] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604 [ 0.206744] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.206748] pci 0000:00:1c.5: PME# disabled [ 0.206779] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.206838] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f] [ 0.206880] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.206940] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f] [ 0.206982] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.208057] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f] [ 0.208114] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.208141] pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff] [ 0.208237] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.208243] pci 0000:00:1d.7: PME# disabled [ 0.208268] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.208357] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.208466] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.208473] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.208481] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007) [ 0.208523] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.208540] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.208553] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.208566] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.208579] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.208592] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af] [ 0.208646] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.208674] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df] [ 0.208687] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf] [ 0.208699] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7] [ 0.208711] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb] [ 0.208723] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff] [ 0.208736] pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff] [ 0.208785] pci 0000:00:1f.2: PME# supported from D3hot [ 0.208790] pci 0000:00:1f.2: PME# disabled [ 0.208813] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.208831] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff] [ 0.208875] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] [ 0.208967] pci 0000:01:00.0: [10de:0427] type 0 class 0x000300 [ 0.208987] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff] [ 0.209008] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.209030] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit] [ 0.209045] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.209059] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.209139] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.209143] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.209146] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff] [ 0.209151] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.209319] pci 0000:02:00.0: [8086:4222] type 0 class 0x000280 [ 0.209374] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4000fff] [ 0.209710] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.209723] pci 0000:02:00.0: PME# disabled [ 0.209793] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.209831] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.209836] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff] [ 0.209841] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.209849] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.209914] pci 0000:00:1c.1: PCI bridge to [bus 04-07] [ 0.209918] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff] [ 0.209923] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.209931] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.210027] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200 [ 0.210051] pci 0000:08:00.0: reg 10: [io 0xc000-0xc0ff] [ 0.210093] pci 0000:08:00.0: reg 18: [mem 0xf8000000-0xf8000fff 64bit] [ 0.210142] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.210204] pci 0000:08:00.0: supports D1 D2 [ 0.210206] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.210212] pci 0000:08:00.0: PME# disabled [ 0.210239] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.210252] pci 0000:00:1c.5: PCI bridge to [bus 08-08] [ 0.210257] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.210262] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff] [ 0.210330] pci 0000:09:09.0: [1180:0832] type 0 class 0x000c00 [ 0.210347] pci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.210349] pci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller [ 0.210366] pci 0000:09:09.0: reg 10: [mem 0xf8100000-0xf81007ff] [ 0.210457] pci 0000:09:09.0: supports D1 D2 [ 0.210459] pci 0000:09:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.210464] pci 0000:09:09.0: PME# disabled [ 0.210487] pci 0000:09:09.1: [1180:0822] type 0 class 0x000805 [ 0.210510] pci 0000:09:09.1: reg 10: [mem 0xf8100800-0xf81008ff] [ 0.210601] pci 0000:09:09.1: supports D1 D2 [ 0.210603] pci 0000:09:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.210608] pci 0000:09:09.1: PME# disabled [ 0.210631] pci 0000:09:09.2: [1180:0592] type 0 class 0x000880 [ 0.210653] pci 0000:09:09.2: reg 10: [mem 0xf8101000-0xf81010ff] [ 0.210744] pci 0000:09:09.2: supports D1 D2 [ 0.210746] pci 0000:09:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.210751] pci 0000:09:09.2: PME# disabled [ 0.210774] pci 0000:09:09.3: [1180:0852] type 0 class 0x000880 [ 0.210796] pci 0000:09:09.3: reg 10: [mem 0xf8101400-0xf81014ff] [ 0.210887] pci 0000:09:09.3: supports D1 D2 [ 0.210889] pci 0000:09:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.210894] pci 0000:09:09.3: PME# disabled [ 0.210947] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode) [ 0.210955] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff] [ 0.210964] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.210966] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.210969] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.210972] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.210974] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.210977] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.210979] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode) [ 0.210982] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.211016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.211139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.211191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.211232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.211267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.211325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.211369] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.211373] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.211374] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.215776] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.215825] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.215873] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.215919] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.215965] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.216021] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.216069] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.216115] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.216260] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.216266] vgaarb: loaded [ 0.216267] vgaarb: bridge control possible 0000:01:00.0 [ 0.216387] i2c-core: driver [aat2870] using legacy suspend method [ 0.216389] i2c-core: driver [aat2870] using legacy resume method [ 0.216471] SCSI subsystem initialized [ 0.216534] libata version 3.00 loaded. [ 0.216589] usbcore: registered new interface driver usbfs [ 0.216600] usbcore: registered new interface driver hub [ 0.216631] usbcore: registered new device driver usb [ 0.216731] PCI: Using ACPI for IRQ routing [ 0.228195] PCI: pci_cache_line_size set to 64 bytes [ 0.228332] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.228335] reserve RAM buffer: 000000007fed0000 - 000000007fffffff [ 0.228472] NetLabel: Initializing [ 0.228474] NetLabel: domain hash size = 128 [ 0.228475] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.228488] NetLabel: unlabeled traffic allowed by default [ 0.228550] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.228556] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.228561] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.232079] Switching to clocksource hpet [ 0.240357] AppArmor: AppArmor Filesystem Enabled [ 0.240395] pnp: PnP ACPI init [ 0.240415] ACPI: bus type pnp registered [ 0.241131] pnp 00:00: [bus 00-ff] [ 0.241134] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.241136] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.241138] pnp 00:00: [io 0x0d00-0xffff window] [ 0.241141] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.241143] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.241145] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.241147] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.241149] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.241151] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.241154] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.241156] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.241158] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.241160] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.241162] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.241164] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.241167] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.241169] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.241171] pnp 00:00: [mem 0x80000000-0xdfffffff window] [ 0.241173] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.241175] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.241256] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.241329] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.241331] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.241333] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.241335] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.241337] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.241339] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 0.241341] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.241343] pnp 00:01: [mem 0xfed45000-0xfed8ffff] [ 0.241412] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.241416] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.241418] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.241421] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.241423] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.241426] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.241429] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.241431] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.241435] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.241634] pnp 00:02: [io 0x0000-0x001f] [ 0.241637] pnp 00:02: [io 0x0081-0x0091] [ 0.241638] pnp 00:02: [io 0x0093-0x009f] [ 0.241640] pnp 00:02: [io 0x00c0-0x00df] [ 0.241642] pnp 00:02: [dma 4] [ 0.241688] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.241698] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.241743] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.241810] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.241874] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.241878] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.241889] pnp 00:05: [io 0x00f0] [ 0.241902] pnp 00:05: [irq 13] [ 0.241945] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.241960] pnp 00:06: [io 0x002e-0x002f] [ 0.241962] pnp 00:06: [io 0x004e-0x004f] [ 0.241964] pnp 00:06: [io 0x0061] [ 0.241966] pnp 00:06: [io 0x0063] [ 0.241967] pnp 00:06: [io 0x0065] [ 0.241969] pnp 00:06: [io 0x0067] [ 0.241971] pnp 00:06: [io 0x0080] [ 0.241973] pnp 00:06: [io 0x0092] [ 0.241974] pnp 00:06: [io 0x00b2-0x00b3] [ 0.241976] pnp 00:06: [io 0x0380-0x0383] [ 0.241978] pnp 00:06: [io 0x0680-0x069f] [ 0.241980] pnp 00:06: [io 0x0800-0x080f] [ 0.241982] pnp 00:06: [io 0x1000-0x107f] [ 0.241983] pnp 00:06: [io 0x1180-0x11bf] [ 0.241985] pnp 00:06: [io 0x1640-0x164f] [ 0.241987] pnp 00:06: [io 0xfe00] [ 0.242068] system 00:06: [io 0x0380-0x0383] has been reserved [ 0.242071] system 00:06: [io 0x0680-0x069f] has been reserved [ 0.242074] system 00:06: [io 0x0800-0x080f] has been reserved [ 0.242076] system 00:06: [io 0x1000-0x107f] has been reserved [ 0.242079] system 00:06: [io 0x1180-0x11bf] has been reserved [ 0.242081] system 00:06: [io 0x1640-0x164f] has been reserved [ 0.242084] system 00:06: [io 0xfe00] has been reserved [ 0.242087] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.242109] pnp 00:07: [io 0x06a0-0x06af] [ 0.242111] pnp 00:07: [io 0x06b0-0x06ff] [ 0.242175] system 00:07: [io 0x06a0-0x06af] has been reserved [ 0.242178] system 00:07: [io 0x06b0-0x06ff] has been reserved [ 0.242181] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.242193] pnp 00:08: [io 0x0070-0x0077] [ 0.242199] pnp 00:08: [irq 8] [ 0.242243] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.242306] pnp 00:09: [io 0x0060] [ 0.242308] pnp 00:09: [io 0x0064] [ 0.242314] pnp 00:09: [irq 1] [ 0.242368] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.242381] pnp 00:0a: [irq 12] [ 0.242437] pnp 00:0a: Plug and Play ACPI device, IDs SYN0138 SYN0100 SYN0002 PNP0f13 (active) [ 0.242458] pnp: PnP ACPI: found 11 devices [ 0.242460] ACPI: ACPI bus type pnp unregistered [ 0.248934] PCI: max bus depth: 1 pci_try_num: 2 [ 0.248996] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80000000-0x800fffff pref] [ 0.249000] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80100000-0x801000ff] [ 0.249007] pci 0000:00:1f.3: BAR 0: set to [mem 0x80100000-0x801000ff] (PCI address [0x80100000-0x801000ff]) [ 0.249013] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80200000-0x804fffff pref] [ 0.249017] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.249019] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.249022] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.249026] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff] [ 0.249030] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.249035] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.249038] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff] [ 0.249044] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.249049] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.249058] pci 0000:00:1c.1: PCI bridge to [bus 04-07] [ 0.249061] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff] [ 0.249067] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.249072] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.249082] pci 0000:08:00.0: BAR 6: assigned [mem 0x80200000-0x8021ffff pref] [ 0.249084] pci 0000:00:1c.5: PCI bridge to [bus 08-08] [ 0.249088] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.249094] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff] [ 0.249099] pci 0000:00:1c.5: bridge window [mem 0x80200000-0x804fffff pref] [ 0.249107] pci 0000:00:1e.0: PCI bridge to [bus 09-09] [ 0.249114] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff] [ 0.249141] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.249146] pci 0000:00:01.0: setting latency timer to 64 [ 0.249157] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.249162] pci 0000:00:1c.0: setting latency timer to 64 [ 0.249170] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.249175] pci 0000:00:1c.1: setting latency timer to 64 [ 0.249184] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.249189] pci 0000:00:1c.5: setting latency timer to 64 [ 0.249198] pci 0000:00:1e.0: setting latency timer to 64 [ 0.249202] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.249204] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.249207] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.249209] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.249211] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.249213] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.249216] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff] [ 0.249218] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.249221] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.249223] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff] [ 0.249225] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.249228] pci_bus 0000:02: resource 0 [io 0x4000-0x7fff] [ 0.249230] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff] [ 0.249232] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.249235] pci_bus 0000:04: resource 0 [io 0x8000-0xbfff] [ 0.249237] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.249239] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.249242] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff] [ 0.249244] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff] [ 0.249246] pci_bus 0000:08: resource 2 [mem 0x80200000-0x804fffff pref] [ 0.249249] pci_bus 0000:09: resource 1 [mem 0xf8100000-0xf81fffff] [ 0.249251] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7] [ 0.249253] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff] [ 0.249255] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff] [ 0.249258] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.249260] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.249262] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.249265] pci_bus 0000:09: resource 10 [mem 0x80000000-0xdfffffff] [ 0.249267] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.249317] NET: Registered protocol family 2 [ 0.249427] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.250120] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.252327] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.252929] TCP: Hash tables configured (established 262144 bind 65536) [ 0.252933] TCP reno registered [ 0.252942] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.252972] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.253091] NET: Registered protocol family 1 [ 0.253299] pci 0000:01:00.0: Boot video device [ 0.253325] PCI: CLS 64 bytes, default 64 [ 0.253340] Simple Boot Flag at 0x35 set to 0x1 [ 0.253724] audit: initializing netlink socket (disabled) [ 0.253735] type=2000 audit(1326375686.248:1): initialized [ 0.283188] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.297266] VFS: Disk quotas dquot_6.5.2 [ 0.297331] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.297895] fuse init (API version 7.17) [ 0.297991] msgmni has been set to 3958 [ 0.298315] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.298342] io scheduler noop registered [ 0.298344] io scheduler deadline registered [ 0.298383] io scheduler cfq registered (default) [ 0.298512] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.298548] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.298601] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.298657] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.298743] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.298800] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.298883] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.298939] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.299043] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.299071] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.299133] intel_idle: MWAIT substates: 0x22220 [ 0.299135] intel_idle: does not run on family 6 model 15 [ 0.299492] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.299829] ACPI: AC Adapter [ACAD] (on-line) [ 0.299908] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.299914] ACPI: Power Button [PWRB] [ 0.299958] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.299961] ACPI: Sleep Button [SLPB] [ 0.300025] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.300312] ACPI: Lid Switch [LID] [ 0.300371] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.300375] ACPI: Power Button [PWRF] [ 0.308064] Monitor-Mwait will be used to enter C-1 state [ 0.308104] Monitor-Mwait will be used to enter C-2 state [ 0.316206] Monitor-Mwait will be used to enter C-3 state [ 0.316218] Marking TSC unstable due to TSC halts in idle [ 0.316235] ACPI: acpi_idle registered with cpuidle [ 0.318549] [Firmware Bug]: Invalid critical threshold (0) [ 0.318979] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.318981] ACPI: Thermal Zone [THR1] (43 C) [ 0.319002] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.319012] ACPI: Battery Slot [BAT0] (battery present) [ 0.319050] ERST: Table is not found! [ 0.319051] GHES: HEST is not enabled! [ 0.319125] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.394038] ACPI: Battery Slot [BAT0] (battery present) [ 0.568067] Freeing initrd memory: 19680k freed [ 0.640445] Linux agpgart interface v0.103 [ 0.642203] brd: module loaded [ 0.643050] loop: module loaded [ 0.643205] ahci 0000:00:1f.2: version 3.0 [ 0.643232] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.643284] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 0.643358] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 0.643363] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 0.643368] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.643902] scsi0 : ahci [ 0.644012] scsi1 : ahci [ 0.644101] scsi2 : ahci [ 0.644223] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 44 [ 0.644227] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 44 [ 0.644230] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 44 [ 0.644312] ata_piix 0000:00:1f.1: version 2.13 [ 0.644321] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.644358] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.644697] scsi3 : ata_piix [ 0.644781] scsi4 : ata_piix [ 0.645135] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 0.645138] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 0.645515] Fixed MDIO Bus: probed [ 0.645537] tun: Universal TUN/TAP device driver, 1.6 [ 0.645539] tun: (C) 1999-2004 Max Krasnyansky [ 0.645691] PPP generic driver version 2.4.2 [ 0.645811] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.645835] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.645850] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.645854] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.645905] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.645939] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.649819] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.649833] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800 [ 0.664019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.664160] hub 1-0:1.0: USB hub found [ 0.664165] hub 1-0:1.0: 4 ports detected [ 0.664247] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.664259] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.664263] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.664314] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.664348] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.668225] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.668239] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00 [ 0.684019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.684138] hub 2-0:1.0: USB hub found [ 0.684142] hub 2-0:1.0: 6 ports detected [ 0.684222] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.684236] uhci_hcd: USB Universal Host Controller Interface driver [ 0.684259] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.684266] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.684270] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.684322] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.684363] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.684500] hub 3-0:1.0: USB hub found [ 0.684504] hub 3-0:1.0: 2 ports detected [ 0.684580] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.684589] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.684592] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.684647] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.684686] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.684818] hub 4-0:1.0: USB hub found [ 0.684822] hub 4-0:1.0: 2 ports detected [ 0.684893] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.684899] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.684903] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.684946] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.684974] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 0.685106] hub 5-0:1.0: USB hub found [ 0.685110] hub 5-0:1.0: 2 ports detected [ 0.685179] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.685186] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.685189] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.685233] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.685269] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 0.685404] hub 6-0:1.0: USB hub found [ 0.685409] hub 6-0:1.0: 2 ports detected [ 0.685478] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.685485] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.685488] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.685539] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.685567] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 0.685697] hub 7-0:1.0: USB hub found [ 0.685701] hub 7-0:1.0: 2 ports detected [ 0.685821] usbcore: registered new interface driver libusual [ 0.685864] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.719777] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.719784] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.719923] mousedev: PS/2 mouse device common for all mice [ 0.721954] rtc_cmos 00:08: RTC can wake from S4 [ 0.722089] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.722122] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.722212] device-mapper: uevent: version 1.0.3 [ 0.722295] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.722370] cpuidle: using governor ladder [ 0.722465] cpuidle: using governor menu [ 0.722468] EFI Variables Facility v0.08 2004-May-17 [ 0.722728] TCP cubic registered [ 0.722835] NET: Registered protocol family 10 [ 0.723283] NET: Registered protocol family 17 [ 0.723300] Registering the dns_resolver key type [ 0.723502] PM: Hibernation image not present or could not be loaded. [ 0.723515] registered taskstats version 1 [ 0.736874] Magic number: 12:380:685 [ 0.737003] rtc_cmos 00:08: setting system clock to 2012-01-12 13:41:27 UTC (1326375687) [ 0.737428] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.737430] EDD information not available. [ 0.751791] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.840480] ata4.00: ATAPI: Slimtype DVD A DS8A1H, WH66, max MWDMA2 [ 0.880367] ata4.00: configured for MWDMA2 [ 0.964108] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.964135] ata3: SATA link down (SStatus 0 SControl 300) [ 0.964167] ata2: SATA link down (SStatus 0 SControl 300) [ 0.967727] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.967735] ata1.00: ATA-8: SAMSUNG HM250JI, HS100-10, max UDMA/100 [ 0.967740] ata1.00: 488397168 sectors, multi 16: LBA48 [ 0.971449] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.971459] ata1.00: configured for UDMA/100 [ 0.971687] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250JI HS10 PQ: 0 ANSI: 5 [ 0.971825] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.971832] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.971889] sd 0:0:0:0: [sda] Write Protect is off [ 0.971892] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.971919] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.974129] scsi 3:0:0:0: CD-ROM Slimtype DVD A DS8A1H WH66 PQ: 0 ANSI: 5 [ 0.979517] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.979523] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.979746] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 0.979899] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.033086] sda: sda1 sda2 sda3 < sda5 sda6 > sda4 [ 1.033963] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.035536] Freeing unused kernel memory: 916k freed [ 1.035814] Write protecting the kernel read-only data: 12288k [ 1.041260] Freeing unused kernel memory: 1652k freed [ 1.045681] Freeing unused kernel memory: 1212k freed [ 1.063401] udevd[102]: starting version 175 [ 1.092043] usb 2-4: new high-speed USB device number 2 using ehci_hcd [ 1.131318] acpi device:05: registered as cooling_device2 [ 1.131399] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5 [ 1.132504] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.144854] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.144880] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.144915] r8169 0000:08:00.0: setting latency timer to 64 [ 1.145007] r8169 0000:08:00.0: irq 45 for MSI/MSI-X [ 1.145452] r8169 0000:08:00.0: eth0: RTL8168b/8111b at 0xffffc9000032e000, 00:1b:24:9e:9a:c4, XID 18000000 IRQ 45 [ 1.145456] r8169 0000:08:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 1.152678] firewire_ohci 0000:09:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.161992] sdhci: Secure Digital Host Controller Interface driver [ 1.161995] sdhci: Copyright(c) Pierre Ossman [ 1.216153] firewire_ohci: Added fw-ohci device 0000:09:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 1.216228] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22) [ 1.216254] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.217300] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.217313] mmc0: no vmmc regulator found [ 1.218342] Registered led device: mmc0:: [ 1.220368] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA [ 1.584080] usb 4-2: new full-speed USB device number 2 using uhci_hcd [ 1.716266] firewire_core: created device fw0: GUID 00241b00cae55a00, S400 [ 1.772151] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input6 [ 1.772317] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2/input0 [ 1.776896] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input7 [ 1.777140] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2/input1 [ 1.777154] usbcore: registered new interface driver usbhid [ 1.777156] usbhid: USB HID core driver [ 2.004486] usb 7-2: new full-speed USB device number 2 using uhci_hcd [ 2.694944] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 2.694947] vesafb: scrolling: redraw [ 2.694950] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.697078] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc90010980000, using 1216k, total 1216k [ 2.697238] Console: switching to colour frame buffer device 80x30 [ 2.697251] fb0: VESA VGA frame buffer device [ 2.871576] Btrfs loaded [ 2.876860] xor: automatically using best checksumming function: generic_sse [ 2.896030] generic_sse: 8851.000 MB/sec [ 2.896033] xor: using function: generic_sse (8851.000 MB/sec) [ 2.896612] device-mapper: dm-raid45: initialized v0.2594b [ 3.223407] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.329350] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.544586] udevd[374]: starting version 175 [ 5.665146] Adding 1500156k swap on /dev/sda6. Priority:-1 extents:1 across:1500156k [ 6.553360] lp: driver loaded but no devices found [ 7.498566] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.703809] wmi: Mapper loaded [ 8.028465] input: HP WMI hotkeys as /devices/virtual/input/input8 [ 8.088107] usb 7-2: USB disconnect, device number 2 [ 8.112948] Bluetooth: Core ver 2.16 [ 8.113618] NET: Registered protocol family 31 [ 8.113621] Bluetooth: HCI device and connection manager initialized [ 8.113624] Bluetooth: HCI socket layer initialized [ 8.113626] Bluetooth: L2CAP socket layer initialized [ 8.113634] Bluetooth: SCO socket layer initialized [ 8.163003] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 8.163035] usbcore: registered new interface driver btusb [ 8.187851] cfg80211: Calling CRDA to update world regulatory domain [ 8.335194] r592 0000:09:09.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.335499] r592: driver successfully loaded [ 8.949216] r852 0000:09:09.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.949292] r852: Non dma capable device detected, dma disabled [ 8.949304] r852: driver loaded successfully [ 9.002538] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.002599] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 9.002631] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 9.052028] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 9.052032] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 9.052099] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.052115] iwl3945 0000:02:00.0: setting latency timer to 64 [ 9.107390] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 9.107393] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 9.107542] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X [ 9.107713] Registered led device: phy0-led [ 9.107751] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 9.235983] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 9.235987] cfg80211: World regulatory domain updated: [ 9.235989] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.235992] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.235995] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.235997] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.236000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.236019] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.294869] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 9.408525] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 9.408608] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 9.819907] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0 [ 9.926432] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 10.193868] Disabling lock debugging due to kernel taint [ 10.193880] nvidia: module license 'NVIDIA' taints kernel. [ 10.764896] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 10.764903] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 10.764914] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.764925] nvidia 0000:01:00.0: setting latency timer to 64 [ 10.764932] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 10.765070] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 285.05.09 Fri Sep 23 17:31:57 PDT 2011 [ 10.829433] Linux video capture interface: v2.00 [ 10.900196] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a110) [ 10.902867] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input12 [ 10.902957] usbcore: registered new interface driver uvcvideo [ 10.902959] USB Video Class driver (1.1.1) [ 12.741383] type=1400 audit(1326372099.501:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=685 comm="apparmor_parser" [ 12.741401] type=1400 audit(1326372099.501:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=731 comm="apparmor_parser" [ 12.741719] type=1400 audit(1326372099.501:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=685 comm="apparmor_parser" [ 12.741735] type=1400 audit(1326372099.501:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=731 comm="apparmor_parser" [ 12.741885] type=1400 audit(1326372099.501:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=685 comm="apparmor_parser" [ 12.741903] type=1400 audit(1326372099.501:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=731 comm="apparmor_parser" [ 12.742424] type=1400 audit(1326372099.501:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=718 comm="apparmor_parser" [ 12.742674] type=1400 audit(1326372099.501:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=718 comm="apparmor_parser" [ 12.742841] type=1400 audit(1326372099.501:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=718 comm="apparmor_parser" [ 14.171366] init: failsafe main process (806) killed by TERM signal [ 14.613742] type=1400 audit(1326372101.373:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=893 comm="apparmor_parser" [ 15.038201] ppdev: user-space parallel port driver [ 17.204628] Bluetooth: RFCOMM TTY layer initialized [ 17.204633] Bluetooth: RFCOMM socket layer initialized [ 17.204635] Bluetooth: RFCOMM ver 1.11 [ 17.209764] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.209767] Bluetooth: BNEP filters: protocol multicast [ 17.880652] audit_printk_skb: 39 callbacks suppressed [ 17.880657] type=1400 audit(1326372104.641:25): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/cupsd" name="/etc/pkcs11/modules/" pid=933 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 18.986621] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9 [ 19.058124] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.062093] r8169 0000:08:00.0: eth0: link down [ 19.062391] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.095059] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0 [ 25.273261] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 27.968894] wlan0: authenticate with 00:1a:2b:8d:bc:bc (try 1) [ 27.970921] wlan0: authenticated [ 27.980944] wlan0: associate with 00:1a:2b:8d:bc:bc (try 1) [ 27.983379] wlan0: RX AssocResp from 00:1a:2b:8d:bc:bc (capab=0x411 status=0 aid=3) [ 27.983382] wlan0: associated [ 27.985051] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 39.504065] wlan0: no IPv6 routers present [ 292.342450] wlan0: deauthenticating from 00:1a:2b:8d:bc:bc by local choice (reason=3) [ 292.388219] cfg80211: All devices are disconnected, going to restore regulatory settings [ 292.388233] cfg80211: Restoring regulatory settings [ 292.388256] cfg80211: Calling CRDA to update world regulatory domain [ 292.400603] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 292.400610] cfg80211: World regulatory domain updated: [ 292.400612] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 292.400615] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 292.400618] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 292.400620] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 292.400623] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 292.400625] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 296.705945] PM: Syncing filesystems ... done. [ 296.709618] PM: Preparing system for mem sleep [ 296.709635] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 296.724539] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 296.740523] PM: Entering mem sleep [ 296.740550] Suspending console(s) (use no_console_suspend to debug) [ 296.741211] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 296.856104] PM: suspend of drv:psmouse dev:serio1 complete after 114.823 msecs [ 296.867470] i8042 aux 00:0a: wake-up capability disabled by ACPI [ 296.868358] i8042 kbd 00:09: wake-up capability enabled by ACPI [ 296.869554] sdhci-pci 0000:09:09.1: PCI INT B disabled [ 296.869973] ata_piix 0000:00:1f.1: PCI INT A disabled [ 296.870545] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 296.904104] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 296.904187] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 296.904193] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 296.904205] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 296.908050] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 296.932079] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 296.955840] sd 0:0:0:0: [sda] Stopping disk [ 297.280130] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 297.296053] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 425.676 msecs [ 297.440600] PM: suspend of drv:sd dev:0:0:0:0 complete after 699.391 msecs [ 297.440640] PM: suspend of drv:scsi dev:target0:0:0 complete after 699.402 msecs [ 297.440678] PM: suspend of drv:scsi dev:host0 complete after 574.526 msecs [ 297.456518] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 586.760 msecs [ 297.456549] PM: suspend of drv: dev:pci0000:00 complete after 585.875 msecs [ 297.456586] PM: suspend of devices complete after 715.688 msecs [ 297.456591] PM: suspend devices took 0.716 seconds [ 297.488614] r8169 0000:08:00.0: PME# enabled [ 297.488671] r8169 0000:08:00.0: wake-up capability enabled by ACPI [ 297.520888] ehci_hcd 0000:00:1d.7: PME# enabled [ 297.536815] ehci_hcd 0000:00:1a.7: PME# enabled [ 297.552858] PM: late suspend of devices complete after 96.263 msecs [ 297.553203] ACPI: Preparing to enter system sleep state S3 [ 297.560632] PM: Saving platform NVS memory [ 297.560742] Disabling non-boot CPUs ... [ 297.664506] CPU 1 is now offline [ 297.665003] Extended CMOS year: 2000 [ 297.665003] ACPI: Low-level resume complete [ 297.665003] PM: Restoring platform NVS memory [ 297.665003] Extended CMOS year: 2000 [ 297.665003] Enabling non-boot CPUs ... [ 297.665003] Booting Node 0 Processor 1 APIC 0x1 [ 297.665003] smpboot cpu 1: start_ip = 9a000 [ 297.562252] Calibrating delay loop (skipped) already calibrated this CPU [ 297.676544] NMI watchdog enabled, takes one hw-pmu counter. [ 297.680168] CPU1 is up [ 297.682403] ACPI: Waking up from system sleep state S3 [ 297.696814] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 297.696863] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 297.696896] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 297.696938] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 297.696957] ehci_hcd 0000:00:1a.7: PME# disabled [ 297.696995] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 297.697001] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 297.697035] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) [ 297.697050] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20007040, writing 0x7040) [ 297.697059] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 297.697066] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 297.697118] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) [ 297.697130] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) [ 297.697135] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600) [ 297.697140] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0xb080) [ 297.697150] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 297.697156] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 297.697208] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x40200, writing 0x40205) [ 297.697221] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0x80418021) [ 297.697226] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xf800f800) [ 297.697231] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0xc0c0) [ 297.697240] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 297.697247] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 297.697308] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 297.697339] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 297.697371] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 297.697413] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 297.697431] ehci_hcd 0000:00:1d.7: PME# disabled [ 297.697452] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 297.697456] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf810f810) [ 297.697461] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x62800000, writing 0x628000f0) [ 297.697474] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) [ 297.697538] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 297.697582] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 297.697606] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 297.697658] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x80100000) [ 297.697732] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x2001) [ 297.697739] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xcc000004) [ 297.697747] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c) [ 297.697752] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xce000000) [ 297.697761] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007) [ 297.697863] iwl3945 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 297.697929] iwl3945 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf4000000) [ 297.697942] iwl3945 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 297.697960] iwl3945 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506) [ 297.698107] r8169 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 297.698132] r8169 0000:08:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf8000004) [ 297.698141] r8169 0000:08:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xc001) [ 297.698148] r8169 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 297.698156] r8169 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100507) [ 297.698264] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 297.698266] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller [ 297.698363] r852 0000:09:09.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 297.698383] r852 0000:09:09.3: restoring config space at offset 0x4 (was 0x0, writing 0xf8101400) [ 297.698389] r852 0000:09:09.3: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 297.698395] r852 0000:09:09.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 297.698978] PM: early resume of devices complete after 2.367 msecs [ 297.699109] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 297.699117] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 297.699152] usb usb3: root hub lost power or was reset [ 297.699171] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 297.699180] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 297.699212] usb usb4: root hub lost power or was reset [ 297.699230] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 297.699236] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 297.699241] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 297.699248] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 297.699279] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 297.699288] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 297.699331] usb usb5: root hub lost power or was reset [ 297.699346] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 297.699353] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 297.699358] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 297.699389] usb usb6: root hub lost power or was reset [ 297.699404] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 297.699411] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 297.699416] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 297.699420] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 297.699449] usb usb7: root hub lost power or was reset [ 297.699448] pci 0000:00:1e.0: setting latency timer to 64 [ 297.699469] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 297.699477] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 297.699521] ahci 0000:00:1f.2: setting latency timer to 64 [ 297.699631] r8169 0000:08:00.0: wake-up capability disabled by ACPI [ 297.699642] r8169 0000:08:00.0: PME# disabled [ 297.701264] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 297.701267] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 297.704261] sd 0:0:0:0: [sda] Starting disk [ 297.756144] firewire_core: skipped bus generations, destroying all nodes [ 297.781769] i8042 kbd 00:09: wake-up capability disabled by ACPI [ 297.820154] PM: resume of drv:hub dev:3-0:1.0 complete after 116.569 msecs [ 297.820162] PM: resume of drv: dev:ep_00 complete after 116.565 msecs [ 297.820168] PM: resume of drv:hub dev:5-0:1.0 complete after 116.478 msecs [ 297.820175] PM: resume of drv: dev:ep_00 complete after 116.478 msecs [ 297.820180] PM: resume of drv:hub dev:6-0:1.0 complete after 116.439 msecs [ 297.820188] PM: resume of drv: dev:ep_00 complete after 116.310 msecs [ 297.820193] PM: resume of drv:hub dev:7-0:1.0 complete after 116.268 msecs [ 297.820200] PM: resume of drv: dev:ep_00 complete after 115.968 msecs [ 297.820206] PM: resume of drv: dev:ep_81 complete after 116.614 msecs [ 297.820211] PM: resume of drv: dev:ep_81 complete after 116.518 msecs [ 297.820217] PM: resume of drv: dev:ep_81 complete after 116.361 msecs [ 297.820222] PM: resume of drv: dev:ep_81 complete after 116.224 msecs [ 297.832051] PM: resume of drv:hub dev:2-0:1.0 complete after 128.493 msecs [ 297.832058] PM: resume of drv: dev:ep_00 complete after 128.493 msecs [ 297.832074] PM: resume of drv: dev:ep_81 complete after 128.512 msecs [ 297.884055] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 179.635 msecs [ 297.884063] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 179.531 msecs [ 297.884070] PM: resume of drv: dev:ep_00 complete after 179.515 msecs [ 297.884076] PM: resume of drv: dev:ep_83 complete after 179.638 msecs [ 297.924070] PM: resume of drv:hub dev:4-0:1.0 complete after 220.406 msecs [ 297.924078] PM: resume of drv: dev:ep_00 complete after 220.407 msecs [ 297.924110] PM: resume of drv: dev:ep_81 complete after 220.442 msecs [ 298.020103] ata3: SATA link down (SStatus 0 SControl 300) [ 298.020152] ata2: SATA link down (SStatus 0 SControl 300) [ 298.036056] usb 4-2: reset full-speed USB device number 2 using uhci_hcd [ 298.104666] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 298.104670] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out [ 298.136544] ata4.00: configured for MWDMA2 [ 298.190678] PM: resume of drv:usbhid dev:4-2:1.0 complete after 486.080 msecs [ 298.190686] PM: resume of drv:usbhid dev:4-2:1.1 complete after 485.997 msecs [ 298.190694] PM: resume of drv: dev:ep_00 complete after 485.962 msecs [ 298.190701] PM: resume of drv: dev:ep_81 complete after 486.083 msecs [ 298.190707] PM: resume of drv: dev:ep_82 complete after 485.997 msecs [ 298.256057] firewire_core: rediscovered device fw0 [ 298.348650] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 649.151 msecs [ 300.204493] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 300.208130] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 300.211831] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 300.211840] ata1.00: configured for UDMA/100 [ 300.225870] PM: resume of drv:sd dev:0:0:0:0 complete after 2521.608 msecs [ 300.225887] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2431.466 msecs [ 300.225911] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2521.607 msecs [ 300.228660] PM: resume of devices complete after 2529.608 msecs [ 300.228874] PM: resume devices took 2.532 seconds [ 300.228903] PM: Finishing wakeup. [ 300.228905] Restarting tasks ... done. [ 300.241164] video LNXVIDEO:00: Restoring backlight state [ 301.214280] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 301.217157] r8169 0000:08:00.0: eth0: link down [ 301.217392] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 309.917702] wlan0: authenticate with 00:1a:2b:8d:bc:bc (try 1) [ 309.919869] wlan0: authenticated [ 309.920696] wlan0: associate with 00:1a:2b:8d:bc:bc (try 1) [ 309.923229] wlan0: RX AssocResp from 00:1a:2b:8d:bc:bc (capab=0x411 status=0 aid=3) [ 309.923233] wlan0: associated [ 309.925065] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 320.392440] wlan0: no IPv6 routers present [ 684.342695] wlan0: deauthenticating from 00:1a:2b:8d:bc:bc by local choice (reason=3) [ 684.376438] cfg80211: All devices are disconnected, going to restore regulatory settings [ 684.376455] cfg80211: Restoring regulatory settings [ 684.376472] cfg80211: Calling CRDA to update world regulatory domain [ 684.384661] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 684.384665] cfg80211: World regulatory domain updated: [ 684.384667] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 684.384670] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 684.384673] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 684.384676] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 684.384678] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 684.384681] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 687.817051] PM: Syncing filesystems ... done. [ 687.824053] PM: Preparing system for mem sleep [ 687.824066] Freezing user space processes ... (elapsed 0.02 seconds) done. [ 687.844524] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 687.860572] PM: Entering mem sleep [ 687.860599] Suspending console(s) (use no_console_suspend to debug) [ 687.861295] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 687.971866] PM: suspend of drv:psmouse dev:serio1 complete after 110.463 msecs [ 687.983151] i8042 aux 00:0a: wake-up capability disabled by ACPI [ 687.984048] i8042 kbd 00:09: wake-up capability enabled by ACPI [ 687.986267] sdhci-pci 0000:09:09.1: PCI INT B disabled [ 687.992479] ata_piix 0000:00:1f.1: PCI INT A disabled [ 687.992577] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 688.020130] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 688.020145] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 688.020195] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 688.020252] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 688.024077] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 688.048064] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 688.068871] sd 0:0:0:0: [sda] Stopping disk [ 688.300203] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 688.316085] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.574 msecs [ 688.557505] PM: suspend of drv:sd dev:0:0:0:0 complete after 696.212 msecs [ 688.557546] PM: suspend of drv:scsi dev:target0:0:0 complete after 696.198 msecs [ 688.557586] PM: suspend of drv:scsi dev:host0 complete after 575.734 msecs [ 688.572521] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 580.249 msecs [ 688.572558] PM: suspend of drv: dev:pci0000:00 complete after 579.916 msecs [ 688.572595] PM: suspend of devices complete after 711.661 msecs [ 688.572599] PM: suspend devices took 0.712 seconds [ 688.604619] r8169 0000:08:00.0: PME# enabled [ 688.604676] r8169 0000:08:00.0: wake-up capability enabled by ACPI [ 688.636891] ehci_hcd 0000:00:1d.7: PME# enabled [ 688.652973] ehci_hcd 0000:00:1a.7: PME# enabled [ 688.668880] PM: late suspend of devices complete after 96.276 msecs [ 688.669227] ACPI: Preparing to enter system sleep state S3 [ 688.676638] PM: Saving platform NVS memory [ 688.676752] Disabling non-boot CPUs ... [ 688.780540] CPU 1 is now offline [ 688.781074] Extended CMOS year: 2000 [ 688.781074] ACPI: Low-level resume complete [ 688.781074] PM: Restoring platform NVS memory [ 688.781074] Extended CMOS year: 2000 [ 688.781074] Enabling non-boot CPUs ... [ 688.781074] Booting Node 0 Processor 1 APIC 0x1 [ 688.781074] smpboot cpu 1: start_ip = 9a000 [ 688.678273] Calibrating delay loop (skipped) already calibrated this CPU [ 688.792621] NMI watchdog enabled, takes one hw-pmu counter. [ 688.796172] CPU1 is up [ 688.798402] ACPI: Waking up from system sleep state S3 [ 688.812857] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 688.812900] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 688.812932] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 688.812974] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 688.812993] ehci_hcd 0000:00:1a.7: PME# disabled [ 688.813030] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 688.813037] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 688.813070] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) [ 688.813090] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 688.813096] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 688.813147] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) [ 688.813159] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) [ 688.813165] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600) [ 688.813170] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x2000b080) [ 688.813179] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 688.813186] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 688.813236] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x40200, writing 0x40205) [ 688.813248] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0x80418021) [ 688.813253] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xf800f800) [ 688.813258] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0x2000c0c0) [ 688.813268] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 688.813274] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 688.813335] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 688.813366] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 688.813397] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 688.813438] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 688.813456] ehci_hcd 0000:00:1d.7: PME# disabled [ 688.813476] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 688.813481] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf810f810) [ 688.813486] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x62800000, writing 0x628000f0) [ 688.813498] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) [ 688.813562] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 688.813605] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 688.813628] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 688.813679] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x80100000) [ 688.813753] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x2001) [ 688.813760] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xcc000004) [ 688.813768] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c) [ 688.813773] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xce000000) [ 688.813782] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007) [ 688.813884] iwl3945 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 688.813950] iwl3945 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf4000000) [ 688.813963] iwl3945 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 688.813981] iwl3945 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506) [ 688.814127] r8169 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 688.814152] r8169 0000:08:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf8000004) [ 688.814161] r8169 0000:08:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xc001) [ 688.814167] r8169 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 688.814176] r8169 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 688.814283] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 688.814285] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller [ 688.814379] r852 0000:09:09.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 688.814399] r852 0000:09:09.3: restoring config space at offset 0x4 (was 0x0, writing 0xf8101400) [ 688.814404] r852 0000:09:09.3: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 688.814411] r852 0000:09:09.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 688.814987] PM: early resume of devices complete after 2.333 msecs [ 688.815089] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 688.815097] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 688.815106] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 688.815116] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 688.815130] usb usb3: root hub lost power or was reset [ 688.815154] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 688.815151] usb usb4: root hub lost power or was reset [ 688.815163] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 688.815171] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 688.815178] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 688.815203] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 688.815214] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 688.815247] usb usb5: root hub lost power or was reset [ 688.815250] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 688.815262] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 688.815270] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 688.815304] usb usb6: root hub lost power or was reset [ 688.815306] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 688.815317] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 688.815324] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 688.815333] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 688.815346] usb usb7: root hub lost power or was reset [ 688.815358] pci 0000:00:1e.0: setting latency timer to 64 [ 688.815372] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 688.815379] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 688.815377] ahci 0000:00:1f.2: setting latency timer to 64 [ 688.815489] r8169 0000:08:00.0: wake-up capability disabled by ACPI [ 688.815497] r8169 0000:08:00.0: PME# disabled [ 688.818387] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 688.818391] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 688.820190] sd 0:0:0:0: [sda] Starting disk [ 688.872940] firewire_core: skipped bus generations, destroying all nodes [ 688.896718] i8042 kbd 00:09: wake-up capability disabled by ACPI [ 688.936074] PM: resume of drv:hub dev:3-0:1.0 complete after 116.457 msecs [ 688.936082] PM: resume of drv: dev:ep_00 complete after 116.454 msecs [ 688.936088] PM: resume of drv: dev:ep_81 complete after 116.469 msecs [ 688.940106] PM: resume of drv:hub dev:5-0:1.0 complete after 120.237 msecs [ 688.940113] PM: resume of drv: dev:ep_00 complete after 120.236 msecs [ 688.940119] PM: resume of drv:hub dev:6-0:1.0 complete after 120.191 msecs [ 688.940126] PM: resume of drv: dev:ep_00 complete after 120.153 msecs [ 688.940132] PM: resume of drv: dev:ep_81 complete after 120.259 msecs [ 688.940138] PM: resume of drv: dev:ep_81 complete after 120.186 msecs [ 688.944057] PM: resume of drv:hub dev:7-0:1.0 complete after 123.925 msecs [ 688.944064] PM: resume of drv: dev:ep_00 complete after 123.897 msecs [ 688.944070] PM: resume of drv: dev:ep_81 complete after 123.921 msecs [ 688.948049] PM: resume of drv:hub dev:2-0:1.0 complete after 128.462 msecs [ 688.948057] PM: resume of drv: dev:ep_00 complete after 128.458 msecs [ 688.948072] PM: resume of drv: dev:ep_81 complete after 128.482 msecs [ 689.001124] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 180.843 msecs [ 689.001133] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 180.821 msecs [ 689.001139] PM: resume of drv: dev:ep_00 complete after 180.810 msecs [ 689.001145] PM: resume of drv: dev:ep_83 complete after 180.851 msecs [ 689.044077] PM: resume of drv:hub dev:4-0:1.0 complete after 224.432 msecs [ 689.044085] PM: resume of drv: dev:ep_00 complete after 224.433 msecs [ 689.044119] PM: resume of drv: dev:ep_81 complete after 224.470 msecs [ 689.140086] ata3: SATA link down (SStatus 0 SControl 300) [ 689.140131] ata2: SATA link down (SStatus 0 SControl 300) [ 689.156071] usb 4-2: reset full-speed USB device number 2 using uhci_hcd [ 689.220669] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 689.220673] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out [ 689.252543] ata4.00: configured for MWDMA2 [ 689.311930] PM: resume of drv:usbhid dev:4-2:1.0 complete after 491.565 msecs [ 689.311939] PM: resume of drv:usbhid dev:4-2:1.1 complete after 491.540 msecs [ 689.311946] PM: resume of drv: dev:ep_00 complete after 491.515 msecs [ 689.311953] PM: resume of drv: dev:ep_81 complete after 491.573 msecs [ 689.311960] PM: resume of drv: dev:ep_82 complete after 491.545 msecs [ 689.465852] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 650.457 msecs [ 689.465941] firewire_core: rediscovered device fw0 [ 691.324523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 691.328152] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 691.331867] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 691.331876] ata1.00: configured for UDMA/100 [ 691.352538] PM: resume of drv:sd dev:0:0:0:0 complete after 2532.347 msecs [ 691.352581] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2443.403 msecs [ 691.352711] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2532.478 msecs [ 691.355320] PM: resume of devices complete after 2540.287 msecs [ 691.355533] PM: resume devices took 2.540 seconds [ 691.355562] PM: Finishing wakeup. [ 691.355563] Restarting tasks ... done. [ 691.377251] video LNXVIDEO:00: Restoring backlight state [ 692.310196] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 692.316592] r8169 0000:08:00.0: eth0: link down [ 692.316916] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 700.976584] wlan0: authenticate with 00:1a:2b:8d:bc:bc (try 1) [ 700.980205] wlan0: authenticated [ 700.980591] wlan0: associate with 00:1a:2b:8d:bc:bc (try 1) [ 700.983799] wlan0: RX AssocResp from 00:1a:2b:8d:bc:bc (capab=0x411 status=0 aid=3) [ 700.983803] wlan0: associated [ 700.985240] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 711.872029] wlan0: no IPv6 routers present [ 903.211769] type=1400 audit(1326394122.852:26): apparmor="STATUS" operation="profile_replace" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=6016 comm="apparmor_parser" [ 903.373391] type=1400 audit(1326394123.016:27): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=6017 comm="apparmor_parser" [ 903.373529] type=1400 audit(1326394123.016:28): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=6017 comm="apparmor_parser" [ 903.373627] type=1400 audit(1326394123.016:29): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=6017 comm="apparmor_parser" [ 904.050494] type=1400 audit(1326394123.691:30): apparmor="STATUS" operation="profile_replace" name="/usr/lib/telepathy/mission-control-5" pid=6020 comm="apparmor_parser" [ 904.050855] type=1400 audit(1326394123.691:31): apparmor="STATUS" operation="profile_replace" name="/usr/lib/telepathy/telepathy-*" pid=6020 comm="apparmor_parser" [ 904.623542] type=1400 audit(1326394124.263:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=6021 comm="apparmor_parser" [ 904.623896] type=1400 audit(1326394124.263:33): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=6021 comm="apparmor_parser" [ 904.862967] type=1400 audit(1326394124.503:34): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=6023 comm="apparmor_parser" [ 909.677431] type=1400 audit(1326394129.321:35): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=6018 comm="apparmor_parser" [ 909.678339] type=1400 audit(1326394129.321:36): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=6018 comm="apparmor_parser" [ 909.679256] type=1400 audit(1326394129.321:37): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=6018 comm="apparmor_parser" [ 909.679870] type=1400 audit(1326394129.321:38): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=6018 comm="apparmor_parser" [ 909.680601] type=1400 audit(1326394129.325:39): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=6018 comm="apparmor_parser" [ 909.924124] type=1400 audit(1326394129.569:40): apparmor="STATUS" operation="profile_replace" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=6061 comm="apparmor_parser" [ 910.095890] type=1400 audit(1326394129.736:41): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=6062 comm="apparmor_parser" [ 910.096048] type=1400 audit(1326394129.740:42): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=6062 comm="apparmor_parser" [ 910.096247] type=1400 audit(1326394129.740:43): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=6062 comm="apparmor_parser" [ 910.780998] type=1400 audit(1326394130.424:44): apparmor="STATUS" operation="profile_replace" name="/usr/lib/telepathy/mission-control-5" pid=6065 comm="apparmor_parser" [ 916.407677] audit_printk_skb: 12 callbacks suppressed [ 916.407680] type=1400 audit(1326394136.049:49): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=6063 comm="apparmor_parser" [ 916.408696] type=1400 audit(1326394136.053:50): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//launchpad_integration" pid=6063 comm="apparmor_parser" [ 916.409614] type=1400 audit(1326394136.053:51): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=6063 comm="apparmor_parser" [ 916.410223] type=1400 audit(1326394136.053:52): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//launchpad_integration" pid=6063 comm="apparmor_parser" [ 916.410854] type=1400 audit(1326394136.053:53): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=6063 comm="apparmor_parser" [ 925.960817] type=1400 audit(1326394145.605:54): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=6118 comm="apparmor_parser" [ 925.961709] type=1400 audit(1326394145.605:55): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//launchpad_integration" pid=6118 comm="apparmor_parser" [ 925.962658] type=1400 audit(1326394145.605:56): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=6118 comm="apparmor_parser" [ 925.963281] type=1400 audit(1326394145.605:57): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//launchpad_integration" pid=6118 comm="apparmor_parser" [ 925.963911] type=1400 audit(1326394145.605:58): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=6118 comm="apparmor_parser"