[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=1AF45733F4570FFD loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c865afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c865b000-0x00000000dae9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ff000fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: LENOVO 627228G/627228G, BIOS H0ET72WW (2.06 ) 10/22/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask FE0000000 write-back [ 0.000000] 7 base 11F000000 mask FFF000000 uncachable [ 0.000000] 8 base 11E800000 mask FFF800000 uncachable [ 0.000000] 9 base 11E600000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xc865b max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xc865afff] [ 0.000000] [mem 0x00000000-0xc85fffff] page 2M [ 0.000000] [mem 0xc8600000-0xc865afff] page 4k [ 0.000000] kernel direct mapping tables up to 0xc865afff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11e5fffff] [ 0.000000] [mem 0x100000000-0x11e5fffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x11e5fffff @ [mem 0xc8655000-0xc865afff] [ 0.000000] RAMDISK: [mem 0x362e0000-0x37167fff] [ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000daffe170 000AC (v01 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: FACP 00000000dafed000 0010C (v05 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000dafef000 0B556 (v02 LENOVO TP-H0 00002060 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf69000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-H0 00002060 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000daffc000 00518 (v02 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000daffb000 006A5 (v02 LENOVO PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000dafee000 000A5 (v32 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafeb000 00038 (v01 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafea000 00098 (v01 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafe9000 0003C (v01 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: FPDT 00000000dafe8000 00064 (v01 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe7000 00968 (v02 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafe6000 00A92 (v02 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe5000 0003E (v01 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe4000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: MSDM 00000000daf64000 00055 (v03 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe3000 000D0 (v02 LENOVO IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe2000 002BA (v01 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: DBG2 00000000dafe1000 000A5 (v00 LENOVO TP-H0 00002060 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11e5fffff] [ 0.000000] NODE_DATA [mem 0x11e5fc000-0x11e5fffff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a000000-ffff88011dbfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xc865afff] [ 0.000000] node 0: [mem 0x100000000-0x11e5fffff] [ 0.000000] On node 0 totalpages: 944615 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 799898 pages, LIFO batch:31 [ 0.000000] Normal zone: 1944 pages used for memmap [ 0.000000] Normal zone: 122472 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000 [ 0.000000] PM: Registered nosave memory: 00000000c865b000 - 00000000dae9f000 [ 0.000000] PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000 [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000 [ 0.000000] PM: Registered nosave memory: 00000000dafff000 - 00000000dfa00000 [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000ff001000 [ 0.000000] PM: Registered nosave memory: 00000000ff001000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011e200000 s83584 r8192 d22912 u262144 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 926281 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=1AF45733F4570FFD loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3619332k/4691968k available (6711k kernel code, 913508k absent, 159128k reserved, 6459k data, 928k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 15728640 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2494.083 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.16 BogoMIPS (lpj=9976332) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000024] Security Framework initialized [ 0.000035] AppArmor: AppArmor initialized [ 0.000036] Yama: becoming mindful. [ 0.000283] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001267] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001699] Mount-cache hash table entries: 256 [ 0.001848] Initializing cgroup subsys cpuacct [ 0.001850] Initializing cgroup subsys memory [ 0.001857] Initializing cgroup subsys devices [ 0.001858] Initializing cgroup subsys freezer [ 0.001859] Initializing cgroup subsys blkio [ 0.001860] Initializing cgroup subsys perf_event [ 0.001883] CPU: Physical Processor ID: 0 [ 0.001884] CPU: Processor Core ID: 0 [ 0.001888] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.001888] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002245] mce: CPU supports 7 MCE banks [ 0.002255] CPU0: Thermal monitoring enabled (TM1) [ 0.002260] using mwait in idle threads. [ 0.004201] ACPI: Core revision 20120320 [ 0.016454] ftrace: allocating 25118 entries in 99 pages [ 0.028378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068007] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09 [ 0.172787] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.172793] ... version: 3 [ 0.172794] ... bit width: 48 [ 0.172794] ... generic registers: 4 [ 0.172795] ... value mask: 0000ffffffffffff [ 0.172796] ... max period: 000000007fffffff [ 0.172797] ... fixed-purpose events: 3 [ 0.172798] ... event mask: 000000070000000f [ 0.172924] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.172997] Booting Node 0, Processors #1 #2 #3 [ 0.213708] Brought up 4 CPUs [ 0.213711] Total of 4 processors activated (19952.66 BogoMIPS). [ 0.216811] devtmpfs: initialized [ 0.217525] EVM: security.selinux [ 0.217526] EVM: security.SMACK64 [ 0.217527] EVM: security.capability [ 0.217564] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes) [ 0.218188] dummy: [ 0.218216] RTC time: 20:43:41, date: 03/24/13 [ 0.218244] NET: Registered protocol family 16 [ 0.218316] Trying to unpack rootfs image as initramfs... [ 0.218373] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.218375] ACPI: bus type pci registered [ 0.218546] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.218548] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.224033] PCI: Using configuration type 1 for base access [ 0.224719] bio: create slab at 0 [ 0.224784] ACPI: Added _OSI(Module Device) [ 0.224785] ACPI: Added _OSI(Processor Device) [ 0.224786] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.224788] ACPI: Added _OSI(Processor Aggregator Device) [ 0.226337] ACPI: EC: Look up EC in DSDT [ 0.227874] ACPI: Executed 1 blocks of module-level executable AML code [ 0.230451] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.329989] ACPI: SSDT 00000000dae3a018 0083B (v02 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.330388] ACPI: Dynamic OEM Table Load: [ 0.330390] ACPI: SSDT (null) 0083B (v02 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.364759] ACPI: SSDT 00000000dae3ba98 00303 (v02 PmRef ApIst 00003000 INTL 20061109) [ 0.365179] ACPI: Dynamic OEM Table Load: [ 0.365181] ACPI: SSDT (null) 00303 (v02 PmRef ApIst 00003000 INTL 20061109) [ 0.368609] ACPI: SSDT 00000000dae39d98 00119 (v02 PmRef ApCst 00003000 INTL 20061109) [ 0.368997] ACPI: Dynamic OEM Table Load: [ 0.368999] ACPI: SSDT (null) 00119 (v02 PmRef ApCst 00003000 INTL 20061109) [ 0.427732] Freeing initrd memory: 14880k freed [ 1.189251] ACPI: Interpreter enabled [ 1.189256] ACPI: (supports S0 S3 S4 S5) [ 1.189282] ACPI: Using IOAPIC for interrupt routing [ 1.194294] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 1.194445] ACPI: No dock devices found. [ 1.194448] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.194709] \_SB_.PCI0:_OSC invalid UUID [ 1.194710] _OSC request data:1 8 1f [ 1.194714] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 1.195125] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7] [ 1.195127] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff] [ 1.195128] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff] [ 1.195131] pci_root PNP0A08:00: >host bridge window [mem 0xdfa00000-0xfeafffff] [ 1.195152] PCI host bridge to bus 0000:00 [ 1.195154] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7] [ 1.195155] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff] [ 1.195157] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff] [ 1.195158] pci_bus 0000:00: >root bus resource [mem 0xdfa00000-0xfeafffff] [ 1.195165] pci 0000:00:00.0: >[8086:0154] type 00 class 0x060000 [ 1.195200] pci 0000:00:02.0: >[8086:0166] type 00 class 0x030000 [ 1.195209] pci 0000:00:02.0: >reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 1.195215] pci 0000:00:02.0: >reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.195219] pci 0000:00:02.0: >reg 20: [io 0x5000-0x503f] [ 1.195268] pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330 [ 1.195290] pci 0000:00:14.0: >reg 10: [mem 0xf3600000-0xf360ffff 64bit] [ 1.195361] pci 0000:00:14.0: >PME# supported from D3hot D3cold [ 1.195385] pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000 [ 1.195408] pci 0000:00:16.0: >reg 10: [mem 0xf3615000-0xf361500f 64bit] [ 1.195485] pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold [ 1.195518] pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320 [ 1.195539] pci 0000:00:1a.0: >reg 10: [mem 0xf361a000-0xf361a3ff] [ 1.195629] pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold [ 1.195655] pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300 [ 1.195670] pci 0000:00:1b.0: >reg 10: [mem 0xf3610000-0xf3613fff 64bit] [ 1.195738] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold [ 1.195761] pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400 [ 1.195840] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold [ 1.195864] pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400 [ 1.195942] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold [ 1.195969] pci 0000:00:1c.2: >[8086:1e14] type 01 class 0x060400 [ 1.196047] pci 0000:00:1c.2: >PME# supported from D0 D3hot D3cold [ 1.196073] pci 0000:00:1c.3: >[8086:1e16] type 01 class 0x060400 [ 1.196150] pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold [ 1.196183] pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320 [ 1.196204] pci 0000:00:1d.0: >reg 10: [mem 0xf3619000-0xf36193ff] [ 1.196293] pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold [ 1.196319] pci 0000:00:1f.0: >[8086:1e57] type 00 class 0x060100 [ 1.196444] pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601 [ 1.196463] pci 0000:00:1f.2: >reg 10: [io 0x5088-0x508f] [ 1.196470] pci 0000:00:1f.2: >reg 14: [io 0x509c-0x509f] [ 1.196478] pci 0000:00:1f.2: >reg 18: [io 0x5080-0x5087] [ 1.196486] pci 0000:00:1f.2: >reg 1c: [io 0x5098-0x509b] [ 1.196494] pci 0000:00:1f.2: >reg 20: [io 0x5060-0x507f] [ 1.196502] pci 0000:00:1f.2: >reg 24: [mem 0xf3618000-0xf36187ff] [ 1.196547] pci 0000:00:1f.2: >PME# supported from D3hot [ 1.196564] pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500 [ 1.196580] pci 0000:00:1f.3: >reg 10: [mem 0xf3614000-0xf36140ff 64bit] [ 1.196600] pci 0000:00:1f.3: >reg 20: [io 0xefa0-0xefbf] [ 1.196762] pci 0000:02:00.0: >[10ec:5229] type 00 class 0xff0000 [ 1.196828] pci 0000:02:00.0: >reg 10: [mem 0xf2e00000-0xf2e00fff] [ 1.197317] pci 0000:02:00.0: >supports D1 D2 [ 1.197318] pci 0000:02:00.0: >PME# supported from D1 D2 D3hot [ 1.205208] pci 0000:00:1c.0: >PCI bridge to [bus 02-02] [ 1.205212] pci 0000:00:1c.0: > bridge window [io 0x4000-0x4fff] [ 1.205216] pci 0000:00:1c.0: > bridge window [mem 0xf2e00000-0xf35fffff] [ 1.205223] pci 0000:00:1c.0: > bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 1.205328] pci 0000:03:00.0: >[8086:0888] type 00 class 0x028000 [ 1.205374] pci 0000:03:00.0: >reg 10: [mem 0xf2d00000-0xf2d01fff 64bit] [ 1.205601] pci 0000:03:00.0: >PME# supported from D0 D3hot D3cold [ 1.213207] pci 0000:00:1c.1: >PCI bridge to [bus 03-03] [ 1.213213] pci 0000:00:1c.1: > bridge window [mem 0xf2d00000-0xf2dfffff] [ 1.213262] pci 0000:00:1c.2: >PCI bridge to [bus 04-0b] [ 1.213267] pci 0000:00:1c.2: > bridge window [io 0x3000-0x3fff] [ 1.213271] pci 0000:00:1c.2: > bridge window [mem 0xf2500000-0xf2cfffff] [ 1.213277] pci 0000:00:1c.2: > bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 1.213398] pci 0000:0c:00.0: >[10ec:8168] type 00 class 0x020000 [ 1.213467] pci 0000:0c:00.0: >reg 10: [io 0x2000-0x20ff] [ 1.213584] pci 0000:0c:00.0: >reg 18: [mem 0xf1404000-0xf1404fff 64bit pref] [ 1.213660] pci 0000:0c:00.0: >reg 20: [mem 0xf1400000-0xf1403fff 64bit pref] [ 1.213997] pci 0000:0c:00.0: >supports D1 D2 [ 1.213998] pci 0000:0c:00.0: >PME# supported from D0 D1 D2 D3hot D3cold [ 1.221181] pci 0000:00:1c.3: >PCI bridge to [bus 0c-0c] [ 1.221185] pci 0000:00:1c.3: > bridge window [io 0x2000-0x2fff] [ 1.221189] pci 0000:00:1c.3: > bridge window [mem 0xf1d00000-0xf24fffff] [ 1.221195] pci 0000:00:1c.3: > bridge window [mem 0xf1400000-0xf1cfffff 64bit pref] [ 1.221216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.221308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.221335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 1.221361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 1.221386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 1.221458] \_SB_.PCI0:_OSC invalid UUID [ 1.221459] _OSC request data:1 1f 1f [ 1.221462] pci0000:00: >Requesting ACPI _OSC control (0x1d) [ 1.221492] \_SB_.PCI0:_OSC invalid UUID [ 1.221493] _OSC request data:1 0 1d [ 1.221496] pci0000:00: >ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 1.221497] ACPI _OSC control for PCIe not granted, disabling ASPM [ 1.223810] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 1.223847] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 1.223884] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 1.223919] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 1.223953] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.223987] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.224022] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 1.224057] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 1.224129] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.224133] vgaarb: loaded [ 1.224134] vgaarb: bridge control possible 0000:00:02.0 [ 1.224248] SCSI subsystem initialized [ 1.224289] libata version 3.00 loaded. [ 1.224304] ACPI: bus type usb registered [ 1.224320] usbcore: registered new interface driver usbfs [ 1.224328] usbcore: registered new interface driver hub [ 1.224344] usbcore: registered new device driver usb [ 1.224396] PCI: Using ACPI for IRQ routing [ 1.225954] PCI: pci_cache_line_size set to 64 bytes [ 1.226117] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 1.226119] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 1.226120] e820: reserve RAM buffer [mem 0xc865b000-0xcbffffff] [ 1.226121] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff] [ 1.226194] NetLabel: Initializing [ 1.226195] NetLabel: domain hash size = 128 [ 1.226196] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.226203] NetLabel: unlabeled traffic allowed by default [ 1.226252] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.226258] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.228270] Switching to clocksource hpet [ 1.232719] AppArmor: AppArmor Filesystem Enabled [ 1.232738] pnp: PnP ACPI init [ 1.232749] ACPI: bus type pnp registered [ 1.233006] pnp 00:00: >[bus 00-3e] [ 1.233008] pnp 00:00: >[io 0x0000-0x0cf7 window] [ 1.233010] pnp 00:00: >[io 0x0cf8-0x0cff] [ 1.233011] pnp 00:00: >[io 0x0d00-0xffff window] [ 1.233013] pnp 00:00: >[mem 0x000a0000-0x000bffff window] [ 1.233014] pnp 00:00: >[mem 0x000c0000-0x000c3fff window] [ 1.233015] pnp 00:00: >[mem 0x000c4000-0x000c7fff window] [ 1.233017] pnp 00:00: >[mem 0x000c8000-0x000cbfff window] [ 1.233018] pnp 00:00: >[mem 0x000cc000-0x000cffff window] [ 1.233019] pnp 00:00: >[mem 0x000d0000-0x000d3fff window] [ 1.233020] pnp 00:00: >[mem 0x000d4000-0x000d7fff window] [ 1.233022] pnp 00:00: >[mem 0x000d8000-0x000dbfff window] [ 1.233023] pnp 00:00: >[mem 0x000dc000-0x000dffff window] [ 1.233024] pnp 00:00: >[mem 0x000e0000-0x000e3fff window] [ 1.233025] pnp 00:00: >[mem 0x000e4000-0x000e7fff window] [ 1.233027] pnp 00:00: >[mem 0x000e8000-0x000ebfff window] [ 1.233028] pnp 00:00: >[mem 0x000ec000-0x000effff window] [ 1.233029] pnp 00:00: >[mem 0x000f0000-0x000fffff window] [ 1.233031] pnp 00:00: >[mem 0xdfa00000-0xfeafffff window] [ 1.233083] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.233095] pnp 00:01: >[io 0x0000-0x001f] [ 1.233097] pnp 00:01: >[io 0x0081-0x0091] [ 1.233098] pnp 00:01: >[io 0x0093-0x009f] [ 1.233099] pnp 00:01: >[io 0x00c0-0x00df] [ 1.233101] pnp 00:01: >[dma 4] [ 1.233114] pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active) [ 1.233120] pnp 00:02: >[mem 0xff000000-0xffffffff] [ 1.233134] pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active) [ 1.233208] pnp 00:03: >[mem 0xfed00000-0xfed003ff] [ 1.233222] pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active) [ 1.233229] pnp 00:04: >[io 0x00f0] [ 1.233238] pnp 00:04: >[irq 13] [ 1.233252] pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.233260] pnp 00:05: >[io 0x002e-0x002f] [ 1.233261] pnp 00:05: >[io 0x004e-0x004f] [ 1.233262] pnp 00:05: >[io 0x0061] [ 1.233264] pnp 00:05: >[io 0x0063] [ 1.233265] pnp 00:05: >[io 0x0065] [ 1.233266] pnp 00:05: >[io 0x0067] [ 1.233267] pnp 00:05: >[io 0x0070] [ 1.233268] pnp 00:05: >[io 0x0080] [ 1.233269] pnp 00:05: >[io 0x0092] [ 1.233270] pnp 00:05: >[io 0x00b2-0x00b3] [ 1.233271] pnp 00:05: >[io 0x0680-0x069f] [ 1.233273] pnp 00:05: >[io 0x1000-0x100f] [ 1.233274] pnp 00:05: >[io 0xffff] [ 1.233275] pnp 00:05: >[io 0xffff] [ 1.233276] pnp 00:05: >[io 0x0400-0x0453] [ 1.233277] pnp 00:05: >[io 0x0458-0x047f] [ 1.233278] pnp 00:05: >[io 0x0500-0x057f] [ 1.233280] pnp 00:05: >[io 0x164e-0x164f] [ 1.233281] pnp 00:05: >[io 0x0068-0x006f] [ 1.233282] pnp 00:05: >[io 0x06fc-0x06ff] [ 1.233283] pnp 00:05: >[io 0x0700-0x0703] [ 1.233317] system 00:05: >[io 0x0680-0x069f] has been reserved [ 1.233319] system 00:05: >[io 0x1000-0x100f] has been reserved [ 1.233321] system 00:05: >[io 0xffff] has been reserved [ 1.233322] system 00:05: >[io 0xffff] has been reserved [ 1.233324] system 00:05: >[io 0x0400-0x0453] has been reserved [ 1.233325] system 00:05: >[io 0x0458-0x047f] has been reserved [ 1.233327] system 00:05: >[io 0x0500-0x057f] has been reserved [ 1.233328] system 00:05: >[io 0x164e-0x164f] has been reserved [ 1.233330] system 00:05: >[io 0x06fc-0x06ff] has been reserved [ 1.233331] system 00:05: >[io 0x0700-0x0703] has been reserved [ 1.233333] system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.233339] pnp 00:06: >[io 0x0070-0x0077] [ 1.233343] pnp 00:06: >[irq 8] [ 1.233357] pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.233376] pnp 00:07: >[io 0x0454-0x0457] [ 1.233399] system 00:07: >[io 0x0454-0x0457] has been reserved [ 1.233401] system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.233640] pnp 00:08: >[io 0x0060] [ 1.233642] pnp 00:08: >[io 0x0064] [ 1.233646] pnp 00:08: >[irq 1] [ 1.233666] pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active) [ 1.233686] pnp 00:09: >[irq 12] [ 1.233705] pnp 00:09: >Plug and Play ACPI device, IDs LEN0022 PNP0f13 (active) [ 1.233785] pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff] [ 1.233787] pnp 00:0a: >[mem 0xfed10000-0xfed17fff] [ 1.233788] pnp 00:0a: >[mem 0xfed18000-0xfed18fff] [ 1.233789] pnp 00:0a: >[mem 0xfed19000-0xfed19fff] [ 1.233790] pnp 00:0a: >[mem 0xf8000000-0xfbffffff] [ 1.233791] pnp 00:0a: >[mem 0xfed20000-0xfed3ffff] [ 1.233793] pnp 00:0a: >[mem 0xfed90000-0xfed93fff] [ 1.233794] pnp 00:0a: >[mem 0xfed45000-0xfed8ffff] [ 1.233795] pnp 00:0a: >[mem 0xff000000-0xffffffff] [ 1.233796] pnp 00:0a: >[mem 0xfee00000-0xfeefffff] [ 1.233797] pnp 00:0a: >[mem 0xfffff000-0xffffffff] [ 1.233827] system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.233829] system 00:0a: >[mem 0xfed10000-0xfed17fff] has been reserved [ 1.233831] system 00:0a: >[mem 0xfed18000-0xfed18fff] has been reserved [ 1.233832] system 00:0a: >[mem 0xfed19000-0xfed19fff] has been reserved [ 1.233834] system 00:0a: >[mem 0xf8000000-0xfbffffff] has been reserved [ 1.233835] system 00:0a: >[mem 0xfed20000-0xfed3ffff] has been reserved [ 1.233837] system 00:0a: >[mem 0xfed90000-0xfed93fff] has been reserved [ 1.233838] system 00:0a: >[mem 0xfed45000-0xfed8ffff] has been reserved [ 1.233840] system 00:0a: >[mem 0xff000000-0xffffffff] could not be reserved [ 1.233842] system 00:0a: >[mem 0xfee00000-0xfeefffff] could not be reserved [ 1.233843] system 00:0a: >[mem 0xfffff000-0xffffffff] has been reserved [ 1.233845] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.233995] pnp: PnP ACPI: found 11 devices [ 1.233996] ACPI: ACPI bus type pnp unregistered [ 1.239939] pci 0000:00:1c.0: >PCI bridge to [bus 02-02] [ 1.239943] pci 0000:00:1c.0: > bridge window [io 0x4000-0x4fff] [ 1.239948] pci 0000:00:1c.0: > bridge window [mem 0xf2e00000-0xf35fffff] [ 1.239952] pci 0000:00:1c.0: > bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 1.239959] pci 0000:00:1c.1: >PCI bridge to [bus 03-03] [ 1.239964] pci 0000:00:1c.1: > bridge window [mem 0xf2d00000-0xf2dfffff] [ 1.239972] pci 0000:00:1c.2: >PCI bridge to [bus 04-0b] [ 1.239975] pci 0000:00:1c.2: > bridge window [io 0x3000-0x3fff] [ 1.239980] pci 0000:00:1c.2: > bridge window [mem 0xf2500000-0xf2cfffff] [ 1.239984] pci 0000:00:1c.2: > bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 1.239991] pci 0000:00:1c.3: >PCI bridge to [bus 0c-0c] [ 1.239993] pci 0000:00:1c.3: > bridge window [io 0x2000-0x2fff] [ 1.239999] pci 0000:00:1c.3: > bridge window [mem 0xf1d00000-0xf24fffff] [ 1.240003] pci 0000:00:1c.3: > bridge window [mem 0xf1400000-0xf1cfffff 64bit pref] [ 1.240043] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7] [ 1.240044] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff] [ 1.240046] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff] [ 1.240047] pci_bus 0000:00: >resource 7 [mem 0xdfa00000-0xfeafffff] [ 1.240049] pci_bus 0000:02: >resource 0 [io 0x4000-0x4fff] [ 1.240050] pci_bus 0000:02: >resource 1 [mem 0xf2e00000-0xf35fffff] [ 1.240051] pci_bus 0000:02: >resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 1.240053] pci_bus 0000:03: >resource 1 [mem 0xf2d00000-0xf2dfffff] [ 1.240055] pci_bus 0000:04: >resource 0 [io 0x3000-0x3fff] [ 1.240056] pci_bus 0000:04: >resource 1 [mem 0xf2500000-0xf2cfffff] [ 1.240057] pci_bus 0000:04: >resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref] [ 1.240059] pci_bus 0000:0c: >resource 0 [io 0x2000-0x2fff] [ 1.240060] pci_bus 0000:0c: >resource 1 [mem 0xf1d00000-0xf24fffff] [ 1.240061] pci_bus 0000:0c: >resource 2 [mem 0xf1400000-0xf1cfffff 64bit pref] [ 1.240085] NET: Registered protocol family 2 [ 1.240175] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.240702] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.242194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.242384] TCP: Hash tables configured (established 524288 bind 65536) [ 1.242386] TCP: reno registered [ 1.242394] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.242409] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.242475] NET: Registered protocol family 1 [ 1.242486] pci 0000:00:02.0: >Boot video device [ 1.242685] PCI: CLS 64 bytes, default 64 [ 1.242687] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.242689] software IO TLB [mem 0xc4655000-0xc8654fff] (64MB) mapped at [ffff8800c4655000-ffff8800c8654fff] [ 1.243071] audit: initializing netlink socket (disabled) [ 1.243078] type=2000 audit(1364157822.136:1): initialized [ 1.263181] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.264322] VFS: Disk quotas dquot_6.5.2 [ 1.264351] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.264681] fuse init (API version 7.19) [ 1.264736] msgmni has been set to 7098 [ 1.265009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.265031] io scheduler noop registered [ 1.265033] io scheduler deadline registered (default) [ 1.265051] io scheduler cfq registered [ 1.265277] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.265290] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.265320] intel_idle: MWAIT substates: 0x21120 [ 1.265321] intel_idle: v0.4 model 0x3A [ 1.265322] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.265958] ACPI: AC Adapter [AC] (on-line) [ 1.266054] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.266057] ACPI: Power Button [PWRB] [ 1.266084] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.266378] ACPI: Lid Switch [LID0] [ 1.266404] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.266406] ACPI: Power Button [PWRF] [ 1.266469] ACPI: Requesting acpi_cpufreq [ 1.269406] thermal LNXTHERM:00: >registered as thermal_zone0 [ 1.269408] ACPI: Thermal Zone [TZ01] (30 C) [ 1.269422] ACPI: Battery Slot [BAT0] (battery present) [ 1.269455] GHES: HEST is not enabled! [ 1.269507] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.270587] Linux agpgart interface v0.103 [ 1.271468] brd: module loaded [ 1.271928] loop: module loaded [ 1.271994] ahci 0000:00:1f.2: >version 3.0 [ 1.272049] ahci 0000:00:1f.2: >irq 40 for MSI/MSI-X [ 1.284176] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode [ 1.284181] ahci 0000:00:1f.2: >flags: 64bit ncq pm led clo pio slum part ems apst [ 1.284196] ahci 0000:00:1f.2: >setting latency timer to 64 [ 1.300440] scsi0 : ahci [ 1.300505] scsi1 : ahci [ 1.300558] scsi2 : ahci [ 1.300605] scsi3 : ahci [ 1.300651] scsi4 : ahci [ 1.300696] scsi5 : ahci [ 1.300873] ata1: SATA max UDMA/133 abar m2048@0xf3618000 port 0xf3618100 irq 40 [ 1.300876] ata2: SATA max UDMA/133 abar m2048@0xf3618000 port 0xf3618180 irq 40 [ 1.300879] ata3: SATA max UDMA/133 abar m2048@0xf3618000 port 0xf3618200 irq 40 [ 1.300880] ata4: DUMMY [ 1.300881] ata5: DUMMY [ 1.300882] ata6: DUMMY [ 1.301101] Fixed MDIO Bus: probed [ 1.301127] tun: Universal TUN/TAP device driver, 1.6 [ 1.301128] tun: (C) 1999-2004 Max Krasnyansky [ 1.301160] PPP generic driver version 2.4.2 [ 1.301200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.301233] ehci_hcd 0000:00:1a.0: >setting latency timer to 64 [ 1.301236] ehci_hcd 0000:00:1a.0: >EHCI Host Controller [ 1.301240] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1 [ 1.301263] ehci_hcd 0000:00:1a.0: >debug port 2 [ 1.305137] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported [ 1.305153] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xf361a000 [ 1.316119] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00 [ 1.316153] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 [ 1.316154] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.316156] usb usb1: >Product: EHCI Host Controller [ 1.316157] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 1.316159] usb usb1: >SerialNumber: 0000:00:1a.0 [ 1.316237] hub 1-0:1.0: >USB hub found [ 1.316240] hub 1-0:1.0: >3 ports detected [ 1.316298] ehci_hcd 0000:00:1d.0: >setting latency timer to 64 [ 1.316301] ehci_hcd 0000:00:1d.0: >EHCI Host Controller [ 1.316305] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2 [ 1.316324] ehci_hcd 0000:00:1d.0: >debug port 2 [ 1.320191] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported [ 1.320202] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xf3619000 [ 1.332096] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00 [ 1.332117] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002 [ 1.332130] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.332131] usb usb2: >Product: EHCI Host Controller [ 1.332133] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 1.332134] usb usb2: >SerialNumber: 0000:00:1d.0 [ 1.332204] hub 2-0:1.0: >USB hub found [ 1.332207] hub 2-0:1.0: >3 ports detected [ 1.332247] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.332257] uhci_hcd: USB Universal Host Controller Interface driver [ 1.332296] xhci_hcd 0000:00:14.0: >setting latency timer to 64 [ 1.332299] xhci_hcd 0000:00:14.0: >xHCI Host Controller [ 1.332302] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3 [ 1.332388] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported [ 1.332400] xhci_hcd 0000:00:14.0: >irq 21, io mem 0xf3600000 [ 1.332444] xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X [ 1.332484] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002 [ 1.332486] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.332487] usb usb3: >Product: xHCI Host Controller [ 1.332488] usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd [ 1.332489] usb usb3: >SerialNumber: 0000:00:14.0 [ 1.332543] xHCI xhci_add_endpoint called for root hub [ 1.332544] xHCI xhci_check_bandwidth called for root hub [ 1.332558] hub 3-0:1.0: >USB hub found [ 1.332565] hub 3-0:1.0: >4 ports detected [ 1.332603] xhci_hcd 0000:00:14.0: >xHCI Host Controller [ 1.332605] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 4 [ 1.332622] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003 [ 1.332624] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.332625] usb usb4: >Product: xHCI Host Controller [ 1.332627] usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd [ 1.332628] usb usb4: >SerialNumber: 0000:00:14.0 [ 1.332675] xHCI xhci_add_endpoint called for root hub [ 1.332676] xHCI xhci_check_bandwidth called for root hub [ 1.332690] hub 4-0:1.0: >USB hub found [ 1.332695] hub 4-0:1.0: >4 ports detected [ 1.332788] usbcore: registered new interface driver libusual [ 1.332815] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.345933] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.345937] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.346012] mousedev: PS/2 mouse device common for all mice [ 1.348101] rtc_cmos 00:06: >RTC can wake from S4 [ 1.348268] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0 [ 1.348305] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.348374] device-mapper: uevent: version 1.0.3 [ 1.348449] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.348538] cpuidle: using governor ladder [ 1.350098] cpuidle: using governor menu [ 1.350099] EFI Variables Facility v0.08 2004-May-17 [ 1.350273] ashmem: initialized [ 1.350357] TCP: cubic registered [ 1.350431] NET: Registered protocol family 10 [ 1.350566] NET: Registered protocol family 17 [ 1.350575] Key type dns_resolver registered [ 1.350688] PM: Hibernation image not present or could not be loaded. [ 1.350695] registered taskstats version 1 [ 1.352499] Key type trusted registered [ 1.353984] Key type encrypted registered [ 1.355844] Magic number: 5:591:751 [ 1.355851] misc uinput: >hash matches [ 1.355859] ata_link link2: >hash matches [ 1.355860] link2: >hash matches [ 1.355868] tty ttyS2: >hash matches [ 1.355934] rtc_cmos 00:06: >setting system clock to 2013-03-24 20:43:42 UTC (1364157822) [ 1.356538] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.356539] EDD information not available. [ 1.364385] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.505511] ACPI: Battery Slot [BAT0] (battery present) [ 1.619791] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.619830] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.619852] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.620179] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.620183] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.620185] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.620435] ata3.00: ATA-9: SanDisk SSD U100 16GB, 10.52.01, max UDMA/133 [ 1.620439] ata3.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.620716] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.620720] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.620724] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.620754] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.620756] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.620758] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.620855] ata3.00: configured for UDMA/133 [ 1.621622] ata1.00: ATA-8: HITACHI HTS725050A7E630, GH2ZB390, max UDMA/133 [ 1.621625] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.622577] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.622581] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.622584] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.623486] ata1.00: configured for UDMA/133 [ 1.623667] scsi 0:0:0:0: >Direct-Access ATA HITACHI HTS72505 GH2Z PQ: 0 ANSI: 5 [ 1.623768] sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.623769] sd 0:0:0:0: >[sda] 4096-byte physical blocks [ 1.623801] sd 0:0:0:0: >Attached scsi generic sg0 type 0 [ 1.623827] sd 0:0:0:0: >[sda] Write Protect is off [ 1.623829] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00 [ 1.623852] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.627724] usb 1-1: >new high-speed USB device number 2 using ehci_hcd [ 1.635592] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8C1, 8.21, max UDMA/100 [ 1.659138] ata2.00: configured for UDMA/100 [ 1.663065] sda: sda1 sda2 sda3 [ 1.663917] sd 0:0:0:0: >[sda] Attached SCSI disk [ 1.680519] scsi 1:0:0:0: >CD-ROM MATSHITA DVD-RAM UJ8C1 8.21 PQ: 0 ANSI: 5 [ 1.699949] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.699963] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.700121] sr 1:0:0:0: >Attached scsi CD-ROM sr0 [ 1.700255] sr 1:0:0:0: >Attached scsi generic sg1 type 5 [ 1.700514] scsi 2:0:0:0: >Direct-Access ATA SanDisk SSD U100 10.5 PQ: 0 ANSI: 5 [ 1.700619] sd 2:0:0:0: >[sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.700642] sd 2:0:0:0: >Attached scsi generic sg2 type 0 [ 1.700790] sd 2:0:0:0: >[sdb] Write Protect is off [ 1.700792] sd 2:0:0:0: >[sdb] Mode Sense: 00 3a 00 00 [ 1.700898] sd 2:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.701751] sdb: sdb1 sdb2 [ 1.702112] sd 2:0:0:0: >[sdb] Attached SCSI disk [ 1.703081] Freeing unused kernel memory: 928k freed [ 1.703166] Write protecting the kernel read-only data: 12288k [ 1.706244] Freeing unused kernel memory: 1472k freed [ 1.708446] Freeing unused kernel memory: 1124k freed [ 1.719484] udevd[113]: starting version 175 [ 1.737756] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.738081] r8169 0000:0c:00.0: >irq 42 for MSI/MSI-X [ 1.738263] r8169 0000:0c:00.0: >eth0: RTL8168evl/8111evl at 0xffffc90000624000, b8:88:e3:e1:90:b1, XID 0c900800 IRQ 42 [ 1.738266] r8169 0000:0c:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.759992] usb 1-1: >New USB device found, idVendor=8087, idProduct=0024 [ 1.759996] usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.760256] hub 1-1:1.0: >USB hub found [ 1.760353] hub 1-1:1.0: >6 ports detected [ 1.871424] usb 2-1: >new high-speed USB device number 2 using ehci_hcd [ 2.003566] usb 2-1: >New USB device found, idVendor=8087, idProduct=0024 [ 2.003572] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.003804] hub 2-1:1.0: >USB hub found [ 2.003911] hub 2-1:1.0: >8 ports detected [ 2.075356] usb 1-1.3: >new full-speed USB device number 3 using ehci_hcd [ 2.171233] usb 1-1.3: >New USB device found, idVendor=8087, idProduct=07da [ 2.171236] usb 1-1.3: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.238944] Refined TSC clocksource calibration: 2494.334 MHz. [ 2.238952] Switching to clocksource tsc [ 2.243001] usb 1-1.4: >new full-speed USB device number 4 using ehci_hcd [ 2.336306] usb 1-1.4: >New USB device found, idVendor=147e, idProduct=1002 [ 2.336313] usb 1-1.4: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.336317] usb 1-1.4: >Product: TouchStrip Fingerprint Sensor [ 2.336320] usb 1-1.4: >Manufacturer: UPEK [ 2.342830] EXT3-fs (loop0): recovery required on readonly filesystem [ 2.342834] EXT3-fs (loop0): write access will be enabled during recovery [ 2.406782] usb 2-1.6: >new high-speed USB device number 3 using ehci_hcd [ 2.506271] usb 2-1.6: >New USB device found, idVendor=04f2, idProduct=b2ea [ 2.506277] usb 2-1.6: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.506281] usb 2-1.6: >Product: Integrated Camera [ 2.506284] usb 2-1.6: >Manufacturer: Chicony Electronics Co., Ltd. [ 18.006963] kjournald starting. Commit interval 5 seconds [ 18.032131] EXT3-fs (loop0): recovery complete [ 18.032134] EXT3-fs (loop0): mounted filesystem with ordered data mode [ 20.431398] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k [ 20.532408] EXT3-fs (loop0): using internal journal [ 20.546367] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.647416] udevd[447]: starting version 175 [ 21.826304] wmi: Mapper loaded [ 21.912918] Non-volatile memory driver v1.3 [ 21.950195] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12 [ 22.158074] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 22.158081] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.158083] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 22.158086] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 22.158090] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.158094] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251) [ 22.158097] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.158099] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 22.190249] Bluetooth: Core ver 2.16 [ 22.190269] NET: Registered protocol family 31 [ 22.190270] Bluetooth: HCI device and connection manager initialized [ 22.190272] Bluetooth: HCI socket layer initialized [ 22.190273] Bluetooth: L2CAP socket layer initialized [ 22.190277] Bluetooth: SCO socket layer initialized [ 22.271804] cfg80211: Calling CRDA to update world regulatory domain [ 22.330709] mei 0000:00:16.0: >setting latency timer to 64 [ 22.330801] mei 0000:00:16.0: >irq 43 for MSI/MSI-X [ 22.688960] usbcore: registered new interface driver btusb [ 22.722686] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12 [ 22.724254] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12 [ 22.725151] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12 [ 22.726070] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 23.014906] [drm] Initialized drm 1.1.0 20060810 [ 23.024705] lp: driver loaded but no devices found [ 23.025228] Linux video capture interface: v2.00 [ 23.200513] ppdev: user-space parallel port driver [ 23.338444] kvm: disabled by bios [ 23.339125] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea) [ 23.340220] Bluetooth: RFCOMM TTY layer initialized [ 23.340225] Bluetooth: RFCOMM socket layer initialized [ 23.340226] Bluetooth: RFCOMM ver 1.11 [ 23.341233] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input4 [ 23.341376] usbcore: registered new interface driver uvcvideo [ 23.341378] USB Video Class driver (1.1.1) [ 23.393876] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.393879] Bluetooth: BNEP filters: protocol multicast [ 23.421927] psmouse serio1: >synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x126c00 [ 23.421936] psmouse serio1: >synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 23.429547] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 23.429550] iwlwifi: Copyright(c) 2003-2012 Intel Corporation [ 23.429641] iwlwifi 0000:03:00.0: >pci_resource_len = 0x00002000 [ 23.429642] iwlwifi 0000:03:00.0: >pci_resource_base = ffffc9000509c000 [ 23.429644] iwlwifi 0000:03:00.0: >HW Revision ID = 0xC4 [ 23.429758] iwlwifi 0000:03:00.0: >irq 44 for MSI/MSI-X [ 23.466882] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 23.466885] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 23.466887] thinkpad_acpi: ThinkPad BIOS H0ET72WW (2.06 ), EC unknown [ 23.466888] thinkpad_acpi: Lenovo ThinkPad Edge E530, model 627228G [ 23.467219] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 23.467338] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 23.467340] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 23.469499] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 23.470245] Registered led device: tpacpi::thinklight [ 23.470365] Registered led device: tpacpi::power [ 23.470405] Registered led device: tpacpi::standby [ 23.470446] Registered led device: tpacpi::thinkvantage [ 23.470455] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 23.470525] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 23.471502] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 [ 23.477728] i915 0000:00:02.0: >power state changed by ACPI to D0 [ 23.477732] i915 0000:00:02.0: >power state changed by ACPI to D0 [ 23.477914] i915 0000:00:02.0: >setting latency timer to 64 [ 23.478267] pci 0000:00:00.0: >Intel Ivybridge Chipset [ 23.478316] pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable [ 23.479050] pci 0000:00:00.0: >detected 65536K stolen memory [ 23.496790] init: failsafe main process (697) killed by TERM signal [ 23.504305] i915 0000:00:02.0: >irq 45 for MSI/MSI-X [ 23.504314] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 23.504315] [drm] Driver supports precise vblank timestamp query. [ 23.504682] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 23.507710] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 23.963638] iwlwifi 0000:03:00.0: >loaded firmware version 18.168.6.1 [ 23.963916] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEBUG disabled [ 23.963919] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEBUGFS enabled [ 23.963920] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 23.963921] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 23.963922] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_P2P disabled [ 23.963923] iwlwifi 0000:03:00.0: >Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8 [ 23.964017] iwlwifi 0000:03:00.0: >L1 Enabled; Disabling L0S [ 23.981160] iwlwifi 0000:03:00.0: >device EEPROM VER=0x81c, CALIB=0x6 [ 23.981163] iwlwifi 0000:03:00.0: >Device SKU: 0x150 [ 23.981164] iwlwifi 0000:03:00.0: >Valid Tx ant: 0x3, Valid Rx ant: 0x3 [ 23.981175] iwlwifi 0000:03:00.0: >Tunable channels: 13 802.11bg, 0 802.11a channels [ 23.981229] Registered led device: phy0-led [ 23.981255] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 23.990659] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 24.164911] fbcon: inteldrmfb (fb0) is primary device [ 24.164984] Console: switching to colour frame buffer device 170x48 [ 24.164999] fb0: inteldrmfb frame buffer device [ 24.165000] drm: registered panic notifier [ 24.170513] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 24.170515] cfg80211: World regulatory domain updated: [ 24.170517] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.170519] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.170520] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.170522] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.170523] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.170525] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.183577] acpi device:03: >registered as cooling_device4 [ 24.183655] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 24.183777] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 24.183864] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 24.388138] snd_hda_intel 0000:00:1b.0: >irq 46 for MSI/MSI-X [ 24.399455] ieee80211 phy0: >Selected rate control algorithm 'iwl-agn-rs' [ 24.845816] type=1400 audit(1364157846.018:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=801 comm="apparmor_parser" [ 24.846214] type=1400 audit(1364157846.018:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=801 comm="apparmor_parser" [ 24.969142] hda_codec: CX20590: BIOS auto-probing. [ 25.074532] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 25.074603] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 25.074661] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 26.875308] iwlwifi 0000:03:00.0: >L1 Enabled; Disabling L0S [ 26.882723] iwlwifi 0000:03:00.0: >Radio type=0x2-0x0-0x0 [ 27.130638] type=1400 audit(1364157848.302:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=983 comm="apparmor_parser" [ 27.130650] type=1400 audit(1364157848.302:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=982 comm="apparmor_parser" [ 27.130882] type=1400 audit(1364157848.306:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=983 comm="apparmor_parser" [ 27.130897] type=1400 audit(1364157848.306:7): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=985 comm="apparmor_parser" [ 27.130918] type=1400 audit(1364157848.306:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=982 comm="apparmor_parser" [ 27.131217] type=1400 audit(1364157848.306:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=984 comm="apparmor_parser" [ 27.131441] type=1400 audit(1364157848.306:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=985 comm="apparmor_parser" [ 27.131480] type=1400 audit(1364157848.306:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=984 comm="apparmor_parser" [ 27.143106] iwlwifi 0000:03:00.0: >L1 Enabled; Disabling L0S [ 27.150519] iwlwifi 0000:03:00.0: >Radio type=0x2-0x0-0x0 [ 27.230609] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.231012] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.415298] r8169 0000:0c:00.0: >eth0: link down [ 27.415650] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.415922] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.555457] wlan0: authenticate with bc:76:70:9c:dd:b5 [ 28.564401] wlan0: send auth to bc:76:70:9c:dd:b5 (try 1/3) [ 28.568259] wlan0: authenticated [ 28.568845] wlan0: associate with bc:76:70:9c:dd:b5 (try 1/3) [ 28.573882] wlan0: RX AssocResp from bc:76:70:9c:dd:b5 (capab=0x411 status=0 aid=8) [ 28.592169] wlan0: associated [ 28.592429] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 32.878084] psmouse serio2: >trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 33.217264] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11 [ 66.731217] attempt to access beyond end of device [ 66.731222] loop0: rw=0, want=8471692500, limit=36339712 [ 66.731224] quiet_error: 39 callbacks suppressed [ 66.731226] Buffer I/O error on device loop0, logical block 4235846249 [ 66.731229] attempt to access beyond end of device [ 66.731230] loop0: rw=0, want=7008172652, limit=36339712 [ 66.731232] Buffer I/O error on device loop0, logical block 3504086325 [ 66.731235] attempt to access beyond end of device [ 66.731236] loop0: rw=0, want=8464839892, limit=36339712 [ 66.731238] Buffer I/O error on device loop0, logical block 4232419945 [ 66.731239] attempt to access beyond end of device [ 66.731241] loop0: rw=0, want=3755683120, limit=36339712 [ 66.731243] Buffer I/O error on device loop0, logical block 1877841559 [ 66.731980] attempt to access beyond end of device [ 66.731993] loop0: rw=0, want=908460544, limit=36339712 [ 66.731997] Buffer I/O error on device loop0, logical block 454230271 [ 66.732002] attempt to access beyond end of device [ 66.732006] loop0: rw=0, want=1743090282, limit=36339712 [ 66.732009] Buffer I/O error on device loop0, logical block 871545140 [ 66.732011] attempt to access beyond end of device [ 66.732012] loop0: rw=0, want=133075366, limit=36339712 [ 66.732013] Buffer I/O error on device loop0, logical block 66537682 [ 66.734463] attempt to access beyond end of device [ 66.734467] loop0: rw=0, want=600408940, limit=36339712 [ 66.734468] Buffer I/O error on device loop0, logical block 300204469 [ 66.734476] attempt to access beyond end of device [ 66.734478] loop0: rw=0, want=8471692500, limit=36339712 [ 66.734480] Buffer I/O error on device loop0, logical block 4235846249 [ 66.734481] attempt to access beyond end of device [ 66.734483] loop0: rw=0, want=7008172652, limit=36339712 [ 66.734484] Buffer I/O error on device loop0, logical block 3504086325 [ 66.734486] attempt to access beyond end of device [ 66.734487] loop0: rw=0, want=8464839892, limit=36339712 [ 66.734490] attempt to access beyond end of device [ 66.734491] loop0: rw=0, want=3755683120, limit=36339712 [ 66.734496] attempt to access beyond end of device [ 66.734497] loop0: rw=0, want=8471692500, limit=36339712 [ 66.734497] attempt to access beyond end of device [ 66.734498] loop0: rw=0, want=7008172652, limit=36339712 [ 66.734499] attempt to access beyond end of device [ 66.734501] loop0: rw=0, want=8464839892, limit=36339712 [ 66.734502] attempt to access beyond end of device [ 66.734503] loop0: rw=0, want=3755683120, limit=36339712 [ 67.594188] attempt to access beyond end of device [ 67.594193] loop0: rw=0, want=8471692500, limit=36339712 [ 67.594196] attempt to access beyond end of device [ 67.594197] loop0: rw=0, want=7008172652, limit=36339712 [ 67.594199] attempt to access beyond end of device [ 67.594200] loop0: rw=0, want=8464839892, limit=36339712 [ 67.594202] attempt to access beyond end of device [ 67.594203] loop0: rw=0, want=3755683120, limit=36339712 [ 67.594206] attempt to access beyond end of device [ 67.594207] loop0: rw=0, want=8471692500, limit=36339712 [ 67.594209] attempt to access beyond end of device [ 67.594210] loop0: rw=0, want=7008172652, limit=36339712 [ 67.594211] attempt to access beyond end of device [ 67.594213] loop0: rw=0, want=8464839892, limit=36339712 [ 67.594214] attempt to access beyond end of device [ 67.594215] loop0: rw=0, want=3755683120, limit=36339712 [ 70.525095] attempt to access beyond end of device [ 70.525099] loop0: rw=0, want=8471692500, limit=36339712 [ 70.525101] attempt to access beyond end of device [ 70.525102] loop0: rw=0, want=7008172652, limit=36339712 [ 70.525103] attempt to access beyond end of device [ 70.525104] loop0: rw=0, want=8464839892, limit=36339712 [ 70.525105] attempt to access beyond end of device [ 70.525105] loop0: rw=0, want=3755683120, limit=36339712 [ 70.525107] attempt to access beyond end of device [ 70.525108] loop0: rw=0, want=8471692500, limit=36339712 [ 70.525109] attempt to access beyond end of device [ 70.525110] loop0: rw=0, want=7008172652, limit=36339712 [ 70.525111] attempt to access beyond end of device [ 70.525111] loop0: rw=0, want=8464839892, limit=36339712 [ 70.525112] attempt to access beyond end of device [ 70.525113] loop0: rw=0, want=3755683120, limit=36339712 [ 73.515382] attempt to access beyond end of device [ 73.515386] loop0: rw=0, want=8471692500, limit=36339712 [ 73.515387] quiet_error: 22 callbacks suppressed [ 73.515388] Buffer I/O error on device loop0, logical block 4235846249 [ 73.515390] attempt to access beyond end of device [ 73.515391] loop0: rw=0, want=7008172652, limit=36339712 [ 73.515392] Buffer I/O error on device loop0, logical block 3504086325 [ 73.515393] attempt to access beyond end of device [ 73.515394] loop0: rw=0, want=8464839892, limit=36339712 [ 73.515395] Buffer I/O error on device loop0, logical block 4232419945 [ 73.515395] attempt to access beyond end of device [ 73.515396] loop0: rw=0, want=3755683120, limit=36339712 [ 73.515397] Buffer I/O error on device loop0, logical block 1877841559 [ 73.515398] attempt to access beyond end of device [ 73.515399] loop0: rw=0, want=8471692500, limit=36339712 [ 73.515400] Buffer I/O error on device loop0, logical block 4235846249 [ 73.515401] attempt to access beyond end of device [ 73.515402] loop0: rw=0, want=7008172652, limit=36339712 [ 73.515402] Buffer I/O error on device loop0, logical block 3504086325 [ 73.515403] attempt to access beyond end of device [ 73.515404] loop0: rw=0, want=8464839892, limit=36339712 [ 73.515405] Buffer I/O error on device loop0, logical block 4232419945 [ 73.515405] attempt to access beyond end of device [ 73.515406] loop0: rw=0, want=3755683120, limit=36339712 [ 73.515407] Buffer I/O error on device loop0, logical block 1877841559 [ 76.514029] attempt to access beyond end of device [ 76.514033] loop0: rw=0, want=8471692500, limit=36339712 [ 76.514035] Buffer I/O error on device loop0, logical block 4235846249 [ 76.514037] attempt to access beyond end of device [ 76.514038] loop0: rw=0, want=7008172652, limit=36339712 [ 76.514039] Buffer I/O error on device loop0, logical block 3504086325 [ 76.514040] attempt to access beyond end of device [ 76.514041] loop0: rw=0, want=8464839892, limit=36339712 [ 76.514042] attempt to access beyond end of device [ 76.514043] loop0: rw=0, want=3755683120, limit=36339712 [ 76.514044] attempt to access beyond end of device [ 76.514045] loop0: rw=0, want=8471692500, limit=36339712 [ 76.514046] attempt to access beyond end of device [ 76.514047] loop0: rw=0, want=7008172652, limit=36339712 [ 76.514048] attempt to access beyond end of device [ 76.514048] loop0: rw=0, want=8464839892, limit=36339712 [ 76.514049] attempt to access beyond end of device [ 76.514050] loop0: rw=0, want=3755683120, limit=36339712 [ 79.504868] attempt to access beyond end of device [ 79.504871] loop0: rw=0, want=8471692500, limit=36339712 [ 79.504873] quiet_error: 6 callbacks suppressed [ 79.504874] Buffer I/O error on device loop0, logical block 4235846249 [ 79.504876] attempt to access beyond end of device [ 79.504877] loop0: rw=0, want=7008172652, limit=36339712 [ 79.504878] Buffer I/O error on device loop0, logical block 3504086325 [ 79.504879] attempt to access beyond end of device [ 79.504879] loop0: rw=0, want=8464839892, limit=36339712 [ 79.504880] Buffer I/O error on device loop0, logical block 4232419945 [ 79.504881] attempt to access beyond end of device [ 79.504882] loop0: rw=0, want=3755683120, limit=36339712 [ 79.504883] Buffer I/O error on device loop0, logical block 1877841559 [ 79.504884] attempt to access beyond end of device [ 79.504885] loop0: rw=0, want=8471692500, limit=36339712 [ 79.504886] Buffer I/O error on device loop0, logical block 4235846249 [ 79.504887] attempt to access beyond end of device [ 79.504888] loop0: rw=0, want=7008172652, limit=36339712 [ 79.504889] Buffer I/O error on device loop0, logical block 3504086325 [ 79.504889] attempt to access beyond end of device [ 79.504890] loop0: rw=0, want=8464839892, limit=36339712 [ 79.504891] Buffer I/O error on device loop0, logical block 4232419945 [ 79.504892] attempt to access beyond end of device [ 79.504893] loop0: rw=0, want=3755683120, limit=36339712 [ 79.504893] Buffer I/O error on device loop0, logical block 1877841559 [ 82.499271] attempt to access beyond end of device [ 82.499274] loop0: rw=0, want=8471692500, limit=36339712 [ 82.499276] Buffer I/O error on device loop0, logical block 4235846249 [ 82.499278] attempt to access beyond end of device [ 82.499279] loop0: rw=0, want=7008172652, limit=36339712 [ 82.499279] Buffer I/O error on device loop0, logical block 3504086325 [ 82.499280] attempt to access beyond end of device [ 82.499281] loop0: rw=0, want=8464839892, limit=36339712 [ 82.499282] attempt to access beyond end of device [ 82.499283] loop0: rw=0, want=3755683120, limit=36339712 [ 82.499285] attempt to access beyond end of device [ 82.499286] loop0: rw=0, want=8471692500, limit=36339712 [ 82.499286] attempt to access beyond end of device [ 82.499287] loop0: rw=0, want=7008172652, limit=36339712 [ 82.499288] attempt to access beyond end of device [ 82.499289] loop0: rw=0, want=8464839892, limit=36339712 [ 82.499290] attempt to access beyond end of device [ 82.499291] loop0: rw=0, want=3755683120, limit=36339712 [ 106.511303] attempt to access beyond end of device [ 106.511310] loop0: rw=0, want=8471692500, limit=36339712 [ 106.511314] quiet_error: 6 callbacks suppressed [ 106.511316] Buffer I/O error on device loop0, logical block 4235846249 [ 106.511320] attempt to access beyond end of device [ 106.511322] loop0: rw=0, want=7008172652, limit=36339712 [ 106.511324] Buffer I/O error on device loop0, logical block 3504086325 [ 106.511326] attempt to access beyond end of device [ 106.511328] loop0: rw=0, want=8464839892, limit=36339712 [ 106.511330] Buffer I/O error on device loop0, logical block 4232419945 [ 106.511332] attempt to access beyond end of device [ 106.511334] loop0: rw=0, want=3755683120, limit=36339712 [ 106.511336] Buffer I/O error on device loop0, logical block 1877841559 [ 106.511340] attempt to access beyond end of device [ 106.511342] loop0: rw=0, want=8471692500, limit=36339712 [ 106.511344] Buffer I/O error on device loop0, logical block 4235846249 [ 106.511346] attempt to access beyond end of device [ 106.511348] loop0: rw=0, want=7008172652, limit=36339712 [ 106.511350] Buffer I/O error on device loop0, logical block 3504086325 [ 106.511352] attempt to access beyond end of device [ 106.511354] loop0: rw=0, want=8464839892, limit=36339712 [ 106.511356] Buffer I/O error on device loop0, logical block 4232419945 [ 106.511358] attempt to access beyond end of device [ 106.511360] loop0: rw=0, want=3755683120, limit=36339712 [ 106.511362] Buffer I/O error on device loop0, logical block 1877841559 [ 278.820675] init: network-manager main process (920) killed by KILL signal [ 278.873781] wlan0: deauthenticating from bc:76:70:9c:dd:b5 by local choice (reason=3) [ 278.946164] cfg80211: All devices are disconnected, going to restore regulatory settings [ 278.946169] cfg80211: Restoring regulatory settings [ 278.946172] cfg80211: Calling CRDA to update world regulatory domain [ 278.949074] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 278.949089] cfg80211: World regulatory domain updated: [ 278.949091] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 278.949093] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 278.949094] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 278.949095] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 278.949096] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 278.949096] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 279.570215] wlan0: authenticate with bc:76:70:9c:dd:b5 [ 279.571811] wlan0: send auth to bc:76:70:9c:dd:b5 (try 1/3) [ 279.574598] wlan0: authenticated [ 279.577055] wlan0: associate with bc:76:70:9c:dd:b5 (try 1/3) [ 279.580493] wlan0: RX AssocResp from bc:76:70:9c:dd:b5 (capab=0x411 status=0 aid=8) [ 279.583393] wlan0: associated [ 440.495889] attempt to access beyond end of device [ 440.495894] loop0: rw=0, want=8471692500, limit=36339712 [ 440.495896] Buffer I/O error on device loop0, logical block 4235846249 [ 440.495899] attempt to access beyond end of device [ 440.495901] loop0: rw=0, want=7008172652, limit=36339712 [ 440.495902] Buffer I/O error on device loop0, logical block 3504086325 [ 440.495904] attempt to access beyond end of device [ 440.495905] loop0: rw=0, want=8464839892, limit=36339712 [ 440.495906] Buffer I/O error on device loop0, logical block 4232419945 [ 440.495908] attempt to access beyond end of device [ 440.495909] loop0: rw=0, want=3755683120, limit=36339712 [ 440.495910] Buffer I/O error on device loop0, logical block 1877841559 [ 440.495914] attempt to access beyond end of device [ 440.495916] loop0: rw=0, want=8471692500, limit=36339712 [ 440.495916] Buffer I/O error on device loop0, logical block 4235846249 [ 440.495917] attempt to access beyond end of device [ 440.495918] loop0: rw=0, want=7008172652, limit=36339712 [ 440.495919] Buffer I/O error on device loop0, logical block 3504086325 [ 440.495920] attempt to access beyond end of device [ 440.495920] loop0: rw=0, want=8464839892, limit=36339712 [ 440.495921] Buffer I/O error on device loop0, logical block 4232419945 [ 440.495922] attempt to access beyond end of device [ 440.495923] loop0: rw=0, want=3755683120, limit=36339712 [ 440.495924] Buffer I/O error on device loop0, logical block 1877841559 [ 441.396532] attempt to access beyond end of device [ 441.396537] loop0: rw=0, want=8471692500, limit=36339712 [ 441.396539] Buffer I/O error on device loop0, logical block 4235846249 [ 441.396542] attempt to access beyond end of device [ 441.396544] loop0: rw=0, want=7008172652, limit=36339712 [ 441.396545] Buffer I/O error on device loop0, logical block 3504086325 [ 441.396546] attempt to access beyond end of device [ 441.396548] loop0: rw=0, want=8464839892, limit=36339712 [ 441.396549] attempt to access beyond end of device [ 441.396551] loop0: rw=0, want=3755683120, limit=36339712 [ 441.396554] attempt to access beyond end of device [ 441.396555] loop0: rw=0, want=8471692500, limit=36339712 [ 441.396557] attempt to access beyond end of device [ 441.396558] loop0: rw=0, want=7008172652, limit=36339712 [ 441.396559] attempt to access beyond end of device [ 441.396561] loop0: rw=0, want=8464839892, limit=36339712 [ 441.396562] attempt to access beyond end of device [ 441.396564] loop0: rw=0, want=3755683120, limit=36339712 [ 521.631497] attempt to access beyond end of device [ 521.631504] loop0: rw=0, want=8471692500, limit=36339712 [ 521.631508] quiet_error: 6 callbacks suppressed [ 521.631510] Buffer I/O error on device loop0, logical block 4235846249 [ 521.631514] attempt to access beyond end of device [ 521.631517] loop0: rw=0, want=7008172652, limit=36339712 [ 521.631519] Buffer I/O error on device loop0, logical block 3504086325 [ 521.631521] attempt to access beyond end of device [ 521.631523] loop0: rw=0, want=8464839892, limit=36339712 [ 521.631525] Buffer I/O error on device loop0, logical block 4232419945 [ 521.631527] attempt to access beyond end of device [ 521.631529] loop0: rw=0, want=3755683120, limit=36339712 [ 521.631531] Buffer I/O error on device loop0, logical block 1877841559 [ 521.631535] attempt to access beyond end of device [ 521.631537] loop0: rw=0, want=8471692500, limit=36339712 [ 521.631539] Buffer I/O error on device loop0, logical block 4235846249 [ 521.631541] attempt to access beyond end of device [ 521.631543] loop0: rw=0, want=7008172652, limit=36339712 [ 521.631545] Buffer I/O error on device loop0, logical block 3504086325 [ 521.631547] attempt to access beyond end of device [ 521.631549] loop0: rw=0, want=8464839892, limit=36339712 [ 521.631551] Buffer I/O error on device loop0, logical block 4232419945 [ 521.631553] attempt to access beyond end of device [ 521.631555] loop0: rw=0, want=3755683120, limit=36339712 [ 521.631557] Buffer I/O error on device loop0, logical block 1877841559 [ 521.641468] attempt to access beyond end of device [ 521.641475] loop0: rw=0, want=8471692500, limit=36339712 [ 521.641479] Buffer I/O error on device loop0, logical block 4235846249 [ 521.641483] attempt to access beyond end of device [ 521.641485] loop0: rw=0, want=7008172652, limit=36339712 [ 521.641487] Buffer I/O error on device loop0, logical block 3504086325 [ 521.641489] attempt to access beyond end of device [ 521.641491] loop0: rw=0, want=8464839892, limit=36339712 [ 521.641494] attempt to access beyond end of device [ 521.641496] loop0: rw=0, want=3755683120, limit=36339712 [ 521.641500] attempt to access beyond end of device [ 521.641502] loop0: rw=0, want=8471692500, limit=36339712 [ 521.641504] attempt to access beyond end of device [ 521.641506] loop0: rw=0, want=7008172652, limit=36339712 [ 521.641508] attempt to access beyond end of device [ 521.641510] loop0: rw=0, want=8464839892, limit=36339712 [ 521.641512] attempt to access beyond end of device [ 521.641514] loop0: rw=0, want=3755683120, limit=36339712 [ 521.691518] attempt to access beyond end of device [ 521.691525] loop0: rw=0, want=8471692500, limit=36339712 [ 521.691528] attempt to access beyond end of device [ 521.691531] loop0: rw=0, want=7008172652, limit=36339712 [ 521.691533] attempt to access beyond end of device [ 521.691535] loop0: rw=0, want=8464839892, limit=36339712 [ 521.691538] attempt to access beyond end of device [ 521.691540] loop0: rw=0, want=3755683120, limit=36339712 [ 521.691544] attempt to access beyond end of device [ 521.691546] loop0: rw=0, want=8471692500, limit=36339712 [ 521.691548] attempt to access beyond end of device [ 521.691550] loop0: rw=0, want=7008172652, limit=36339712 [ 521.691552] attempt to access beyond end of device [ 521.691554] loop0: rw=0, want=8464839892, limit=36339712 [ 521.691556] attempt to access beyond end of device [ 521.691558] loop0: rw=0, want=3755683120, limit=36339712