[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-11-generic (buildd@rothera) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #48-Ubuntu SMP Fri Jul 29 19:05:14 UTC 2011 (Ubuntu 2.6.38-11.48-generic 2.6.38.8) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff80000 (usable) [ 0.000000] BIOS-e820: 00000000bff80000 - 00000000bff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff8e000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: System manufacturer P5K-E/P5K-E, BIOS 1006 01/30/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbff80 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 3674c000 - 3739e000 [ 0.000000] ACPI: RSDP 000fbb80 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT bff80100 00054 (v01 A_M_I_ OEMXSDT 01000830 MSFT 00000097) [ 0.000000] ACPI: FACP bff80290 000F4 (v03 A_M_I_ OEMFACP 01000830 MSFT 00000097) [ 0.000000] ACPI: DSDT bff805c0 090CD (v01 A0812 A0812001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS bff8e000 00040 [ 0.000000] ACPI: APIC bff80390 0006C (v01 A_M_I_ OEMAPIC 01000830 MSFT 00000097) [ 0.000000] ACPI: MCFG bff80400 0003C (v01 A_M_I_ OEMMCFG 01000830 MSFT 00000097) [ 0.000000] ACPI: OEMB bff8e040 00081 (v01 A_M_I_ AMI_OEM 01000830 MSFT 00000097) [ 0.000000] ACPI: HPET bff89690 00038 (v01 A_M_I_ OEMHPET 01000830 MSFT 00000097) [ 0.000000] ACPI: OSFR bff896d0 000B0 (v01 A_M_I_ OEMOSFR 01000830 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2183MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bff80 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bff80 [ 0.000000] On node 0 totalpages: 786191 [ 0.000000] free_area_init_node: node 0, pgdat c1784180, node_mem_map f4f4c200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4368 pages used for memmap [ 0.000000] HighMem zone: 554610 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f4800000 s28800 r0 d24448 u1048576 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780047 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=149fc23e-41d5-4d39-8a40-697d03061afe ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15725760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bff80) [ 0.000000] Memory: 3081768k/3145216k available (5190k kernel code, 62996k reserved, 2538k data, 700k init, 2235912k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc1511ba1 - 0xc178c500 (2538 kB) [ 0.000000] .text : 0xc1000000 - 0xc1511ba1 (5190 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f3408000 soft=f340a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2137.796 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4275.59 BogoMIPS (lpj=8551184) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004031] Security Framework initialized [ 0.004047] AppArmor: AppArmor initialized [ 0.004049] Yama: becoming mindful. [ 0.004106] Mount-cache hash table entries: 512 [ 0.004247] Initializing cgroup subsys ns [ 0.004251] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004254] Initializing cgroup subsys cpuacct [ 0.004259] Initializing cgroup subsys memory [ 0.004268] Initializing cgroup subsys devices [ 0.004270] Initializing cgroup subsys freezer [ 0.004272] Initializing cgroup subsys net_cls [ 0.004275] Initializing cgroup subsys blkio [ 0.004311] CPU: Physical Processor ID: 0 [ 0.004312] CPU: Processor Core ID: 0 [ 0.004316] mce: CPU supports 6 MCE banks [ 0.004325] CPU0: Thermal monitoring enabled (TM2) [ 0.004329] using mwait in idle threads. [ 0.008879] ACPI: Core revision 20110112 [ 0.016011] ftrace: allocating 23649 entries in 47 pages [ 0.020054] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020356] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.061899] CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 [ 0.064003] APIC calibration not consistent with PM-Timer: 155ms instead of 100ms [ 0.064003] APIC delta adjusted to PM-Timer: 1670451 (2605885) [ 0.064003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.064003] PEBS disabled due to CPU errata. [ 0.064003] ... version: 2 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 3 [ 0.064003] ... event mask: 0000000700000003 [ 0.064003] CPU 1 irqstacks, hard=f34d0000 soft=f34d2000 [ 0.064003] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.152025] Brought up 2 CPUs [ 0.152028] Total of 2 processors activated (8552.01 BogoMIPS). [ 0.152954] devtmpfs: initialized [ 0.153181] print_constraints: dummy: [ 0.153205] Time: 16:28:16 Date: 08/23/11 [ 0.153247] NET: Registered protocol family 16 [ 0.153278] Trying to unpack rootfs image as initramfs... [ 0.153378] EISA bus registered [ 0.153387] ACPI: bus type pci registered [ 0.153464] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.153467] PCI: not using MMCONFIG [ 0.153627] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.153629] PCI: Using configuration type 1 for base access [ 0.156088] bio: create slab at 0 [ 0.157867] ACPI: EC: Look up EC in DSDT [ 0.159536] ACPI: Executed 1 blocks of module-level executable AML code [ 0.165415] ACPI: SSDT bff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.165830] ACPI: Dynamic OEM Table Load: [ 0.165833] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.166045] ACPI: SSDT bff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.166452] ACPI: Dynamic OEM Table Load: [ 0.166456] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.166657] ACPI: Interpreter enabled [ 0.166666] ACPI: (supports S0 S1 S3 S4 S5) [ 0.166692] ACPI: Using IOAPIC for interrupt routing [ 0.166719] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.167330] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.167332] PCI: Using MMCONFIG for extended config space [ 0.176087] ACPI: No dock devices found. [ 0.176090] HEST: Table not found. [ 0.176094] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.176169] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.176328] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.176331] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.176334] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.176337] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.176339] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 0.176357] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600 [ 0.176402] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604 [ 0.176438] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.176441] pci 0000:00:01.0: PME# disabled [ 0.176482] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.176525] pci 0000:00:1a.0: reg 20: [io 0xa800-0xa81f] [ 0.176570] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.176613] pci 0000:00:1a.1: reg 20: [io 0xa880-0xa89f] [ 0.176657] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.176701] pci 0000:00:1a.2: reg 20: [io 0xac00-0xac1f] [ 0.176757] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.176779] pci 0000:00:1a.7: reg 10: [mem 0xfbfffc00-0xfbffffff] [ 0.176853] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.176858] pci 0000:00:1a.7: PME# disabled [ 0.176878] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.176935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.176939] pci 0000:00:1c.0: PME# disabled [ 0.176963] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 [ 0.177022] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.177026] pci 0000:00:1c.4: PME# disabled [ 0.177048] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604 [ 0.177104] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.177108] pci 0000:00:1c.5: PME# disabled [ 0.177132] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.177175] pci 0000:00:1d.0: reg 20: [io 0xa080-0xa09f] [ 0.177220] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.177263] pci 0000:00:1d.1: reg 20: [io 0xa400-0xa41f] [ 0.177310] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.177353] pci 0000:00:1d.2: reg 20: [io 0xa480-0xa49f] [ 0.177408] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.177430] pci 0000:00:1d.7: reg 10: [mem 0xfbfff800-0xfbfffbff] [ 0.177505] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.177509] pci 0000:00:1d.7: PME# disabled [ 0.177528] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.177585] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601 [ 0.177667] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.177706] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101 [ 0.177722] pci 0000:00:1f.2: reg 10: [io 0x9000-0x9007] [ 0.177730] pci 0000:00:1f.2: reg 14: [io 0x8c00-0x8c03] [ 0.177739] pci 0000:00:1f.2: reg 18: [io 0x8880-0x8887] [ 0.177748] pci 0000:00:1f.2: reg 1c: [io 0x8800-0x8803] [ 0.177756] pci 0000:00:1f.2: reg 20: [io 0x8480-0x848f] [ 0.177765] pci 0000:00:1f.2: reg 24: [io 0x8400-0x840f] [ 0.177805] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.177821] pci 0000:00:1f.3: reg 10: [mem 0xfbfff400-0xfbfff4ff 64bit] [ 0.177843] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.177876] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101 [ 0.177891] pci 0000:00:1f.5: reg 10: [io 0xa000-0xa007] [ 0.177900] pci 0000:00:1f.5: reg 14: [io 0x9c00-0x9c03] [ 0.177908] pci 0000:00:1f.5: reg 18: [io 0x9880-0x9887] [ 0.177916] pci 0000:00:1f.5: reg 1c: [io 0x9800-0x9803] [ 0.177925] pci 0000:00:1f.5: reg 20: [io 0x9480-0x948f] [ 0.177933] pci 0000:00:1f.5: reg 24: [io 0x9400-0x940f] [ 0.178004] pci 0000:01:00.0: [10de:0391] type 0 class 0x000300 [ 0.178015] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.178027] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.178038] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit] [ 0.178046] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f] [ 0.178054] pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref] [ 0.178084] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.178092] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.178096] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.178099] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe8fffff] [ 0.178105] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.178146] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.178150] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.178155] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.178161] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] [ 0.178218] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101 [ 0.178307] pci 0000:03:00.0: reg 24: [mem 0xfeafe000-0xfeafffff] [ 0.178322] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.178354] pci 0000:03:00.0: PME# supported from D3hot [ 0.178360] pci 0000:03:00.0: PME# disabled [ 0.178390] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101 [ 0.178415] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07] [ 0.178429] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883] [ 0.178443] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807] [ 0.178457] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483] [ 0.178472] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f] [ 0.178544] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.178560] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.178564] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.178568] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.178574] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.178635] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200 [ 0.178659] pci 0000:02:00.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 0.178672] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff] [ 0.178715] pci 0000:02:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref] [ 0.178756] pci 0000:02:00.0: supports D1 D2 [ 0.178758] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.178763] pci 0000:02:00.0: PME# disabled [ 0.184031] pci 0000:00:1c.5: PCI bridge to [bus 02-02] [ 0.184036] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.184040] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.184046] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.184082] pci 0000:05:01.0: [1274:1371] type 0 class 0x000401 [ 0.184099] pci 0000:05:01.0: reg 10: [io 0xec00-0xec3f] [ 0.184171] pci 0000:05:01.0: supports D2 [ 0.184173] pci 0000:05:01.0: PME# supported from D0 D2 D3hot [ 0.184178] pci 0000:05:01.0: PME# disabled [ 0.184195] pci 0000:05:02.0: [11c1:5811] type 0 class 0x000c00 [ 0.184212] pci 0000:05:02.0: reg 10: [mem 0xfebff000-0xfebfffff] [ 0.184278] pci 0000:05:02.0: supports D1 D2 [ 0.184281] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot [ 0.184285] pci 0000:05:02.0: PME# disabled [ 0.184302] pci 0000:05:03.0: [11c1:5811] type 0 class 0x000c00 [ 0.184319] pci 0000:05:03.0: reg 10: [mem 0xfebfe000-0xfebfefff] [ 0.184385] pci 0000:05:03.0: supports D1 D2 [ 0.184387] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot [ 0.184392] pci 0000:05:03.0: PME# disabled [ 0.184434] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.184439] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.184443] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.184449] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.184452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.184454] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.184457] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.184460] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.184462] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.184484] pci_bus 0000:00: on NUMA node 0 [ 0.184489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.184671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.184717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.184843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.184898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.184956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.185029] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.195300] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.195358] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.195412] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.195467] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.195520] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.195575] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.195632] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.195686] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.195811] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.195818] vgaarb: loaded [ 0.196068] SCSI subsystem initialized [ 0.196136] libata version 3.00 loaded. [ 0.196191] usbcore: registered new interface driver usbfs [ 0.196204] usbcore: registered new interface driver hub [ 0.196233] usbcore: registered new device driver usb [ 0.196358] wmi: Mapper loaded [ 0.196360] PCI: Using ACPI for IRQ routing [ 0.196364] PCI: pci_cache_line_size set to 64 bytes [ 0.196472] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.196475] reserve RAM buffer: 00000000bff80000 - 00000000bfffffff [ 0.196587] NetLabel: Initializing [ 0.196590] NetLabel: domain hash size = 128 [ 0.196591] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.196603] NetLabel: unlabeled traffic allowed by default [ 0.196642] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.196647] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.196653] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.200299] Switching to clocksource hpet [ 0.203368] Switched to NOHz mode on CPU #0 [ 0.203487] Switched to NOHz mode on CPU #1 [ 0.208764] AppArmor: AppArmor Filesystem Enabled [ 0.208798] pnp: PnP ACPI init [ 0.208824] ACPI: bus type pnp registered [ 0.208938] pnp 00:00: [bus 00-ff] [ 0.208941] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.208944] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.208946] pnp 00:00: [io 0x0d00-0xffff window] [ 0.208949] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.208951] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.208954] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 0.209038] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.209050] pnp 00:01: [mem 0xfed14000-0xfed19fff] [ 0.209123] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.209127] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.209166] pnp 00:02: [dma 4] [ 0.209168] pnp 00:02: [io 0x0000-0x000f] [ 0.209171] pnp 00:02: [io 0x0081-0x0083] [ 0.209173] pnp 00:02: [io 0x0087] [ 0.209175] pnp 00:02: [io 0x0089-0x008b] [ 0.209177] pnp 00:02: [io 0x008f] [ 0.209179] pnp 00:02: [io 0x00c0-0x00df] [ 0.209210] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.209223] pnp 00:03: [io 0x0070-0x0071] [ 0.209236] pnp 00:03: [irq 8] [ 0.209268] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.209278] pnp 00:04: [io 0x0061] [ 0.209309] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.209319] pnp 00:05: [io 0x00f0-0x00ff] [ 0.209325] pnp 00:05: [irq 13] [ 0.209362] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.209540] pnp 00:06: [io 0x0000-0xffffffff disabled] [ 0.209543] pnp 00:06: [io 0x0000-0xffffffff disabled] [ 0.209545] pnp 00:06: [io 0x0290-0x0297] [ 0.209606] system 00:06: [io 0x0290-0x0297] has been reserved [ 0.209610] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.209724] pnp 00:07: [io 0x0010-0x001f] [ 0.209727] pnp 00:07: [io 0x0022-0x003f] [ 0.209729] pnp 00:07: [io 0x0044-0x004d] [ 0.209731] pnp 00:07: [io 0x0050-0x005f] [ 0.209733] pnp 00:07: [io 0x0062-0x0063] [ 0.209735] pnp 00:07: [io 0x0065-0x006f] [ 0.209737] pnp 00:07: [io 0x0072-0x007f] [ 0.209739] pnp 00:07: [io 0x0080] [ 0.209741] pnp 00:07: [io 0x0084-0x0086] [ 0.209743] pnp 00:07: [io 0x0088] [ 0.209745] pnp 00:07: [io 0x008c-0x008e] [ 0.209747] pnp 00:07: [io 0x0090-0x009f] [ 0.209749] pnp 00:07: [io 0x00a2-0x00bf] [ 0.209751] pnp 00:07: [io 0x00e0-0x00ef] [ 0.209753] pnp 00:07: [io 0x04d0-0x04d1] [ 0.209755] pnp 00:07: [io 0x0800-0x087f] [ 0.209757] pnp 00:07: [io 0x0400-0x03ff disabled] [ 0.209759] pnp 00:07: [io 0x0480-0x04bf] [ 0.209764] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] [ 0.209767] pnp 00:07: [mem 0xfed20000-0xfed3ffff] [ 0.209769] pnp 00:07: [mem 0xfed50000-0xfed8ffff] [ 0.209771] pnp 00:07: [mem 0xffa00000-0xffafffff] [ 0.209773] pnp 00:07: [mem 0xffb00000-0xffbfffff] [ 0.209775] pnp 00:07: [mem 0xffe00000-0xffefffff] [ 0.209777] pnp 00:07: [mem 0xfff00000-0xfffffffe] [ 0.209873] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.209876] system 00:07: [io 0x0800-0x087f] has been reserved [ 0.209879] system 00:07: [io 0x0480-0x04bf] has been reserved [ 0.209882] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.209885] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.209888] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.209891] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved [ 0.209894] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.209897] system 00:07: [mem 0xffe00000-0xffefffff] has been reserved [ 0.209900] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved [ 0.209903] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.209976] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.210015] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.210310] pnp 00:09: [irq 4] [ 0.210313] pnp 00:09: [dma 0 disabled] [ 0.210315] pnp 00:09: [io 0x03f8-0x03ff] [ 0.210389] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.210442] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.210445] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.210505] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.210508] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.210512] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.210544] pnp 00:0b: [io 0x0060] [ 0.210546] pnp 00:0b: [io 0x0064] [ 0.210551] pnp 00:0b: [irq 1] [ 0.210589] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.210629] pnp 00:0c: [mem 0xe0000000-0xefffffff] [ 0.210690] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.210694] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.211181] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.211183] pnp 00:0d: [mem 0x000c0000-0x000cffff] [ 0.211186] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.211188] pnp 00:0d: [mem 0x00100000-0xbfffffff] [ 0.211190] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.211274] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.211277] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.211280] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.211283] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.211286] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.211433] pnp: PnP ACPI: found 14 devices [ 0.211435] ACPI: ACPI bus type pnp unregistered [ 0.211439] PnPBIOS: Disabled by ACPI PNP [ 0.248107] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff] [ 0.248112] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff pref] [ 0.248115] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.248119] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.248122] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.248125] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.248129] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe8fffff] [ 0.248133] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.248138] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.248141] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.248146] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff] [ 0.248150] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] [ 0.248158] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref] [ 0.248161] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.248164] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.248170] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.248174] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff pref] [ 0.248181] pci 0000:00:1c.5: PCI bridge to [bus 02-02] [ 0.248184] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.248189] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.248193] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.248199] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.248202] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.248207] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.248211] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.248236] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.248240] pci 0000:00:01.0: setting latency timer to 64 [ 0.248246] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.248253] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.248257] pci 0000:00:1c.0: setting latency timer to 64 [ 0.248264] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.248268] pci 0000:00:1c.4: setting latency timer to 64 [ 0.248275] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.248279] pci 0000:00:1c.5: setting latency timer to 64 [ 0.248285] pci 0000:00:1e.0: setting latency timer to 64 [ 0.248289] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.248292] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.248294] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.248297] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.248299] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff] [ 0.248302] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.248305] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe8fffff] [ 0.248307] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.248310] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.248312] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc03fffff] [ 0.248315] pci_bus 0000:04: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref] [ 0.248317] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.248320] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.248322] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff pref] [ 0.248325] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.248327] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.248330] pci_bus 0000:02: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.248333] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.248335] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.248337] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.248340] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.248342] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.248345] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.248347] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xffffffff] [ 0.248390] NET: Registered protocol family 2 [ 0.248471] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.248723] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.249164] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.249408] TCP: Hash tables configured (established 131072 bind 65536) [ 0.249410] TCP reno registered [ 0.249413] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.249423] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.249526] NET: Registered protocol family 1 [ 0.249696] pci 0000:01:00.0: Boot video device [ 0.249716] PCI: CLS 32 bytes, default 64 [ 0.249954] cpufreq-nforce2: No nForce2 chipset. [ 0.250104] audit: initializing netlink socket (disabled) [ 0.250114] type=2000 audit(1314116896.244:1): initialized [ 0.259456] highmem bounce pool size: 64 pages [ 0.259462] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.261463] VFS: Disk quotas dquot_6.5.2 [ 0.261530] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.262260] fuse init (API version 7.16) [ 0.262360] msgmni has been set to 1652 [ 0.262611] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.262639] io scheduler noop registered [ 0.262641] io scheduler deadline registered [ 0.262658] io scheduler cfq registered (default) [ 0.262797] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.262832] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.262889] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.262926] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.262989] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.263026] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.263090] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.263127] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.263218] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.263245] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.263324] intel_idle: MWAIT substates: 0x20 [ 0.263327] intel_idle: does not run on family 6 model 15 [ 0.263440] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.263446] ACPI: Power Button [PWRB] [ 0.263501] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.263505] ACPI: Power Button [PWRF] [ 0.263716] ACPI: acpi_idle registered with cpuidle [ 0.266265] ERST: Table is not found! [ 0.266335] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.276205] isapnp: Scanning for PnP cards... [ 0.286684] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.456508] Freeing initrd memory: 12616k freed [ 0.629110] isapnp: No Plug & Play device found [ 0.654196] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.654599] Linux agpgart interface v0.103 [ 0.656256] brd: module loaded [ 0.656927] loop: module loaded [ 0.657030] i2c-core: driver [adp5520] using legacy suspend method [ 0.657032] i2c-core: driver [adp5520] using legacy resume method [ 0.657150] ata_piix 0000:00:1f.2: version 2.13 [ 0.657176] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.657181] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.657227] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.657613] scsi0 : ata_piix [ 0.657718] scsi1 : ata_piix [ 0.659390] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 22 [ 0.659395] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 22 [ 0.659429] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.659435] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.659474] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.659731] scsi2 : ata_piix [ 0.659810] scsi3 : ata_piix [ 0.661060] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22 [ 0.661064] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22 [ 0.661138] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 0.661145] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.661177] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 0.661192] pata_acpi 0000:03:00.1: PCI INT B disabled [ 0.661576] Fixed MDIO Bus: probed [ 0.661622] PPP generic driver version 2.4.2 [ 0.661668] tun: Universal TUN/TAP device driver, 1.6 [ 0.661670] tun: (C) 1999-2004 Max Krasnyansky [ 0.661765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.661786] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.661798] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.661802] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.661844] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.672084] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.675956] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.675970] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00 [ 0.688014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.688196] hub 1-0:1.0: USB hub found [ 0.688202] hub 1-0:1.0: 6 ports detected [ 0.688314] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.688325] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.688328] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.688372] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.688419] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.692290] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.692306] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800 [ 0.708035] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.708189] hub 2-0:1.0: USB hub found [ 0.708194] hub 2-0:1.0: 6 ports detected [ 0.708307] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.708323] uhci_hcd: USB Universal Host Controller Interface driver [ 0.708347] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.708354] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.708357] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.708401] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.708448] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 [ 0.708581] hub 3-0:1.0: USB hub found [ 0.708586] hub 3-0:1.0: 2 ports detected [ 0.708666] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.708672] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.708675] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.708718] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.708764] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 [ 0.708896] hub 4-0:1.0: USB hub found [ 0.708900] hub 4-0:1.0: 2 ports detected [ 0.708974] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.708979] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.708983] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.709023] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.712063] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00 [ 0.712233] hub 5-0:1.0: USB hub found [ 0.712239] hub 5-0:1.0: 2 ports detected [ 0.712331] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.712337] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.712340] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.712380] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.712418] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 [ 0.712550] hub 6-0:1.0: USB hub found [ 0.712554] hub 6-0:1.0: 2 ports detected [ 0.712637] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.712643] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.712646] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.712686] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.712732] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 [ 0.712866] hub 7-0:1.0: USB hub found [ 0.712870] hub 7-0:1.0: 2 ports detected [ 0.712951] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.712957] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.712960] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.713001] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.713039] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 [ 0.713169] hub 8-0:1.0: USB hub found [ 0.713173] hub 8-0:1.0: 2 ports detected [ 0.713339] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.713341] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.713856] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.713968] mousedev: PS/2 mouse device common for all mice [ 0.714113] rtc_cmos 00:03: RTC can wake from S4 [ 0.714178] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.714201] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.714291] device-mapper: uevent: version 1.0.3 [ 0.714377] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.714443] device-mapper: multipath: version 1.2.0 loaded [ 0.714446] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.714524] EISA: Probing bus 0 at eisa.0 [ 0.714527] EISA: Cannot allocate resource for mainboard [ 0.714529] Cannot allocate resource for EISA slot 1 [ 0.714531] Cannot allocate resource for EISA slot 2 [ 0.714533] Cannot allocate resource for EISA slot 3 [ 0.714535] Cannot allocate resource for EISA slot 4 [ 0.714537] Cannot allocate resource for EISA slot 5 [ 0.714539] Cannot allocate resource for EISA slot 6 [ 0.714540] Cannot allocate resource for EISA slot 7 [ 0.714542] Cannot allocate resource for EISA slot 8 [ 0.714544] EISA: Detected 0 cards. [ 0.714597] cpuidle: using governor ladder [ 0.714600] cpuidle: using governor menu [ 0.714912] TCP cubic registered [ 0.715053] NET: Registered protocol family 10 [ 0.715703] NET: Registered protocol family 17 [ 0.715719] Registering the dns_resolver key type [ 0.716238] Using IPI No-Shortcut mode [ 0.716335] PM: Hibernation image not present or could not be loaded. [ 0.716352] registered taskstats version 1 [ 0.716693] Magic number: 7:364:490 [ 0.716777] rtc_cmos 00:03: setting system clock to 2011-08-23 16:28:16 UTC (1314116896) [ 0.716780] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.716782] EDD information not available. [ 0.733590] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.990615] ata3: SATA link down (SStatus 0 SControl 300) [ 1.001205] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.001207] ata4: SATA link down (SStatus 0 SControl 300) [ 1.248035] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 1.248194] Refined TSC clocksource calibration: 2138.181 MHz. [ 1.248200] Switching to clocksource tsc [ 1.456079] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.456093] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.468076] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.468090] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.468101] ata2.01: link offline, clearing class 3 to NONE [ 1.472143] ata1.00: ATA-8: OCZ-VERTEX2, 1.25, max UDMA/133 [ 1.472147] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.476140] ata2.00: ATAPI: ASUS DRW-20B1LT, 1.00, max UDMA/100 [ 1.492034] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 1.492144] ata2.00: configured for UDMA/100 [ 1.499603] ata1.01: ATA-8: ST31500341AS, CC1H, max UDMA/133 [ 1.499607] ata1.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.512142] ata1.00: configured for UDMA/133 [ 1.571531] ata1.01: configured for UDMA/133 [ 1.571689] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.25 PQ: 0 ANSI: 5 [ 1.571867] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.571877] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.571947] sd 0:0:0:0: [sda] Write Protect is off [ 1.571950] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.572010] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.572017] scsi 0:0:1:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 [ 1.572188] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.572501] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.572588] sd 0:0:1:0: [sdb] Write Protect is off [ 1.572592] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.572875] sda: sda1 sda2 [ 1.573063] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.573189] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.573295] scsi 1:0:0:0: CD-ROM ASUS DRW-20B1LT 1.00 PQ: 0 ANSI: 5 [ 1.575510] sr0: scsi3-mmc drive: 32x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.575514] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.575648] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.575731] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.583118] sdb: sdb1 < sdb5 > [ 1.583447] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.583484] Freeing unused kernel memory: 700k freed [ 1.583721] Write protecting the kernel text: 5192k [ 1.583770] Write protecting the kernel read-only data: 2148k [ 1.604647] <30>udev[71]: starting version 167 [ 1.658422] Btrfs loaded [ 1.679902] sky2: driver version 1.28 [ 1.679941] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.679954] sky2 0000:02:00.0: setting latency timer to 64 [ 1.679979] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2 [ 1.691526] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.691561] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 1.692271] sky2 0000:02:00.0: irq 44 for MSI/MSI-X [ 1.693688] sky2 0000:02:00.0: eth0: addr 00:1b:fc:46:6f:a4 [ 1.697204] scsi4 : pata_jmicron [ 1.700149] scsi5 : pata_jmicron [ 1.700824] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 1.700827] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 1.702411] ahci 0000:03:00.0: version 3.0 [ 1.702426] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.716063] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.716068] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.716075] ahci 0000:03:00.0: setting latency timer to 64 [ 1.718760] scsi6 : ahci [ 1.719502] scsi7 : ahci [ 1.719634] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16 [ 1.719638] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16 [ 1.723736] usbcore: registered new interface driver uas [ 1.730628] Initializing USB Mass Storage driver... [ 1.734115] scsi8 : usb-storage 1-5:1.0 [ 1.736094] scsi9 : usb-storage 1-6:1.0 [ 1.736811] usbcore: registered new interface driver usb-storage [ 1.736814] USB Mass Storage support registered. [ 1.993081] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.032177] ata8: SATA link down (SStatus 0 SControl 300) [ 2.036174] ata7: SATA link down (SStatus 0 SControl 300) [ 2.128116] usb 8-1: new low speed USB device using uhci_hcd and address 2 [ 2.544030] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 2.732935] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 2.733440] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 2.734062] scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 2.734562] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 2.735097] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 2.735271] sd 8:0:0:1: Attached scsi generic sg4 type 0 [ 2.735442] sd 8:0:0:2: Attached scsi generic sg5 type 0 [ 2.735603] sd 8:0:0:3: Attached scsi generic sg6 type 0 [ 2.736691] scsi 9:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2 [ 2.737210] sd 9:0:0:0: Attached scsi generic sg7 type 0 [ 2.737855] sd 9:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [ 2.738294] sd 9:0:0:0: [sdg] Write Protect is off [ 2.738298] sd 9:0:0:0: [sdg] Mode Sense: 6e 00 00 08 [ 2.738302] sd 9:0:0:0: [sdg] Assuming drive cache: write through [ 2.739296] sd 9:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [ 2.739807] sd 9:0:0:0: [sdg] Assuming drive cache: write through [ 2.741118] sdg: [ 2.741293] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 2.741916] sd 8:0:0:1: [sdd] Attached SCSI removable disk [ 2.742297] sd 9:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [ 2.742543] sd 8:0:0:2: [sde] Attached SCSI removable disk [ 2.742793] sd 9:0:0:0: [sdg] Assuming drive cache: write through [ 2.742797] sd 9:0:0:0: [sdg] Attached SCSI removable disk [ 2.743165] sd 8:0:0:3: [sdf] Attached SCSI removable disk [ 3.052309] Adding 999420k swap on /dev/sda1. Priority:-1 extents:1 across:999420k SS [ 3.123229] <30>udev[330]: starting version 167 [ 3.184035] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 3.201131] lp: driver loaded but no devices found [ 3.413329] type=1400 audit(1314116899.193:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=511 comm="apparmor_parser" [ 3.414216] type=1400 audit(1314116899.193:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=511 comm="apparmor_parser" [ 3.414787] type=1400 audit(1314116899.193:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=511 comm="apparmor_parser" [ 3.441900] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 3.528416] [drm] Initialized drm 1.1.0 20060810 [ 3.569233] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3 [ 3.569466] generic-usb 0003:046D:C03F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 3.569513] usbcore: registered new interface driver usbhid [ 3.569515] usbhid: USB HID core driver [ 3.656651] Linux video capture interface: v2.00 [ 3.685410] firewire_ohci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.741565] firewire_ohci: Added fw-ohci device 0000:05:02.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 3.741629] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.755205] sky2 0000:02:00.0: eth0: enabling interface [ 3.755826] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.778453] gspca: v2.12.0 registered [ 3.800946] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 3.833157] gspca: probing 046d:0928 [ 3.925268] type=1400 audit(1314116899.705:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=724 comm="apparmor_parser" [ 3.928291] type=1400 audit(1314116899.709:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=724 comm="apparmor_parser" [ 3.928886] type=1400 audit(1314116899.709:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=724 comm="apparmor_parser" [ 3.932829] type=1400 audit(1314116899.713:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=723 comm="apparmor_parser" [ 3.946515] type=1400 audit(1314116899.725:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=732 comm="apparmor_parser" [ 3.947991] type=1400 audit(1314116899.725:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=732 comm="apparmor_parser" [ 4.042841] input: spca561 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/input/input4 [ 4.042955] gspca: video0 created [ 4.042983] usbcore: registered new interface driver spca561 [ 4.240133] firewire_core: created device fw0: GUID 00308d0121343bea, S400 [ 4.300143] firewire_core: created device fw1: GUID 0011d8000149a60b, S400 [ 4.650391] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.650398] nouveau 0000:01:00.0: setting latency timer to 64 [ 4.665172] cfg80211: Calling CRDA to update world regulatory domain [ 4.670652] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b100a2) [ 4.706311] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 4.743218] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 4.743223] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 4.743226] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.18 [ 4.743230] [drm] nouveau 0000:01:00.0: TMDS table version 1.1 [ 4.743232] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed [ 4.743234] [drm] nouveau 0000:01:00.0: BIT table 'd' not found [ 4.743237] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [ 4.743240] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028 [ 4.743243] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03000302 00000000 [ 4.743245] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 [ 4.743248] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04011312 00000000 [ 4.743250] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 020223f1 00c0c080 [ 4.743254] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2 [ 4.743257] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 4.743260] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 4.743263] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 4.743266] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 4.743268] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 4.743275] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDE3C [ 4.743331] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE4B6 [ 4.825108] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEB4C [ 4.825127] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xECCC [ 4.854081] cfg80211: World regulatory domain updated: [ 4.854085] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.854088] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.854091] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.854094] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.854097] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.854099] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.868044] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEE26 [ 4.885413] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0 [ 4.888792] EXT4-fs (sdb5): re-mounted. Opts: commit=0 [ 4.954223] ENS1371 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.044749] i2c i2c-0: Assuming LM99 chip at 0x4c [ 5.044753] i2c i2c-0: If it is an LM89, instantiate it with the new_device sysfs interface [ 5.044757] [drm] nouveau 0000:01:00.0: Detected monitoring device: lm99 [ 5.056026] [drm] nouveau 0000:01:00.0: 2 available performance level(s) [ 5.056032] [drm] nouveau 0000:01:00.0: 0: memory 750MHz core 580MHz voltage 1300mV fanspeed 31% [ 5.056036] [drm] nouveau 0000:01:00.0: 1: memory 750MHz core 580MHz voltage 1300mV fanspeed 65% [ 5.056049] [drm] nouveau 0000:01:00.0: c: memory 702MHz core 558MHz [ 5.056293] [TTM] Zone kernel: Available graphics memory: 429586 kiB. [ 5.056296] [TTM] Zone highmem: Available graphics memory: 1547542 kiB. [ 5.056298] [TTM] Initializing pool allocator. [ 5.056310] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM [ 5.066760] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 5.070058] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.070062] [drm] No driver support for vblank timestamp query. [ 5.071835] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 5.071839] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 5.071849] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 5.071852] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3) [ 5.071855] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4) [ 5.217712] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 5.217716] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217719] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 5.217721] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217724] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 5.217727] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217729] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 5.217732] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217734] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 5.217737] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217739] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 5.217742] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217745] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 5.217747] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217750] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 5.217752] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217755] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 5.217758] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217760] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 5.217763] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217765] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 5.217768] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217770] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 5.217773] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217775] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 5.217778] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.217780] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 5.217783] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.274899] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.275802] ieee80211 phy0: hwaddr 00:15:af:0d:af:e4, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 5.292742] rtl8187: Customer ID is 0x00 [ 5.292809] Registered led device: rtl8187-phy0::radio [ 5.292838] Registered led device: rtl8187-phy0::tx [ 5.292863] Registered led device: rtl8187-phy0::rx [ 5.295069] rtl8187: wireless switch is on [ 5.295151] usbcore: registered new interface driver rtl8187 [ 5.364661] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f2a47e00 [ 5.364886] fbcon: nouveaufb (fb0) is primary device [ 5.365805] Console: switching to colour frame buffer device 160x64 [ 5.365843] fb0: nouveaufb frame buffer device [ 5.365846] drm: registered panic notifier [ 5.365854] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 5.504637] <30>udev[334]: renamed network interface wlan0 to wlan3 [ 5.971642] ppdev: user-space parallel port driver [ 5.983662] audit_printk_skb: 18 callbacks suppressed [ 5.983665] type=1400 audit(1314116901.761:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1403 comm="apparmor_parser" [ 5.984752] type=1400 audit(1314116901.765:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1403 comm="apparmor_parser" [ 6.224617] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 6.224779] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.306003] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 6.306008] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 6.316318] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 6.316321] [drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 1 using output C [ 11.077440] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0 [ 11.526378] EXT4-fs (sdb5): re-mounted. Opts: commit=0 [ 1001.388652] sdg: detected capacity change from 2018496512 to 0 [ 1010.163303] usb 1-6: USB disconnect, address 4 [ 1076.972031] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 1077.105563] scsi10 : usb-storage 1-6:1.0 [ 1078.104664] scsi 10:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2 [ 1078.105366] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 1078.110111] sd 10:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [ 1078.110637] sd 10:0:0:0: [sdg] Write Protect is off [ 1078.110642] sd 10:0:0:0: [sdg] Mode Sense: 6e 00 00 08 [ 1078.110646] sd 10:0:0:0: [sdg] Assuming drive cache: write through [ 1078.111641] sd 10:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [ 1078.112139] sd 10:0:0:0: [sdg] Assuming drive cache: write through [ 1078.113338] sdg: [ 1078.114515] sd 10:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [ 1078.115012] sd 10:0:0:0: [sdg] Assuming drive cache: write through [ 1078.115017] sd 10:0:0:0: [sdg] Attached SCSI removable disk [ 5878.178353] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 5878.188306] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 6134.435338] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 6134.445310] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [10997.179120] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [10997.189087] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [15282.526880] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [15282.536899] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [20176.177007] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [20176.186946] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [41896.558820] usb 1-6: USB disconnect, address 5 [44798.802130] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [44798.812121] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [46257.120048] usb 1-6: new high speed USB device using ehci_hcd and address 6 [46257.254251] scsi11 : usb-storage 1-6:1.0 [46258.252620] scsi 11:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2 [46258.253417] sd 11:0:0:0: Attached scsi generic sg7 type 0 [46258.255683] sd 11:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [46258.256349] sd 11:0:0:0: [sdg] Write Protect is off [46258.256354] sd 11:0:0:0: [sdg] Mode Sense: 6e 00 00 08 [46258.256358] sd 11:0:0:0: [sdg] Assuming drive cache: write through [46258.257968] sd 11:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [46258.258471] sd 11:0:0:0: [sdg] Assuming drive cache: write through [46258.259867] sdg: [46258.262348] sd 11:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [46258.262838] sd 11:0:0:0: [sdg] Assuming drive cache: write through [46258.262844] sd 11:0:0:0: [sdg] Attached SCSI removable disk [47317.179705] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [47317.189652] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [48178.882599] usb 1-6: USB disconnect, address 6 [48179.136047] usb 1-6: new high speed USB device using ehci_hcd and address 7 [48179.280324] usb 1-6: device descriptor read/all, error -71 [48179.396036] usb 1-6: new high speed USB device using ehci_hcd and address 8 [48179.546945] scsi12 : usb-storage 1-6:1.0 [48179.685347] usb 1-6: USB disconnect, address 8 [48179.956043] usb 1-6: new high speed USB device using ehci_hcd and address 9 [48180.104038] scsi13 : usb-storage 1-6:1.0 [48181.105231] scsi 13:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2 [48181.108578] sd 13:0:0:0: Attached scsi generic sg7 type 0 [48181.108585] sd 13:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [48181.109076] sd 13:0:0:0: [sdg] Write Protect is off [48181.109081] sd 13:0:0:0: [sdg] Mode Sense: 6e 00 00 08 [48181.109085] sd 13:0:0:0: [sdg] Assuming drive cache: write through [48181.110079] sd 13:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [48181.110581] sd 13:0:0:0: [sdg] Assuming drive cache: write through [48181.111792] sdg: [48181.114336] sd 13:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [48181.114824] sd 13:0:0:0: [sdg] Assuming drive cache: write through [48181.114830] sd 13:0:0:0: [sdg] Attached SCSI removable disk [48181.841106] usb 1-6: USB disconnect, address 9 [48182.100059] usb 1-6: new high speed USB device using ehci_hcd and address 10 [48182.168327] hub 1-0:1.0: unable to enumerate USB device on port 6 [48182.440039] usb 5-2: new full speed USB device using uhci_hcd and address 2 [48182.586062] usb 5-2: not running at top speed; connect to a high speed hub [48182.639348] scsi14 : usb-storage 5-2:1.0 [48183.645089] scsi 14:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2 [48183.647489] sd 14:0:0:0: Attached scsi generic sg7 type 0 [48183.652079] sd 14:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [48183.655072] sd 14:0:0:0: [sdg] Write Protect is off [48183.655078] sd 14:0:0:0: [sdg] Mode Sense: 6e 00 00 08 [48183.655082] sd 14:0:0:0: [sdg] Assuming drive cache: write through [48183.662080] sd 14:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [48183.665073] sd 14:0:0:0: [sdg] Assuming drive cache: write through [48183.671144] sdg: [48183.680090] sd 14:0:0:0: [sdg] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [48183.683082] sd 14:0:0:0: [sdg] Assuming drive cache: write through [48183.683090] sd 14:0:0:0: [sdg] Attached SCSI removable disk [84582.056069] usb 5-2: USB disconnect, address 2 [84886.977492] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [84886.987460] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [85798.176767] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [85798.186714] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [86221.377969] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [86221.387947] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [88845.176892] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [88845.186844] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [88885.851048] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [88885.861031] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [89490.072045] usb 1-6: new high speed USB device using ehci_hcd and address 11 [89490.248862] usblp0: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3817 [89490.249468] usbcore: registered new interface driver usblp [89491.478900] usb 1-6: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [89499.188904] usblp0: removed [89522.128039] usb 1-5: reset high speed USB device using ehci_hcd and address 3 [89527.308274] usb 1-5: device descriptor read/all, error -71 [89527.424039] usb 1-5: reset high speed USB device using ehci_hcd and address 3 [89532.604279] usb 1-5: device descriptor read/all, error -71 [89532.720038] usb 1-5: reset high speed USB device using ehci_hcd and address 3 [89532.788278] usb 1-5: device descriptor read/8, error -71 [89532.956281] usb 1-5: device descriptor read/8, error -71 [89533.172030] usb 1-5: reset high speed USB device using ehci_hcd and address 3 [89533.240276] usb 1-5: device descriptor read/8, error -71 [89533.408279] usb 1-5: device descriptor read/8, error -71 [89533.512050] usb 1-5: USB disconnect, address 3 [89533.512067] sd 8:0:0:1: Device offlined - not ready after error recovery [89533.688036] usb 1-5: new high speed USB device using ehci_hcd and address 12 [89543.820281] usb 1-5: device descriptor read/all, error -110 [89543.932041] usb 1-5: new high speed USB device using ehci_hcd and address 13 [89554.064283] usb 1-5: device descriptor read/all, error -110 [89554.176037] usb 1-5: new high speed USB device using ehci_hcd and address 14 [89559.196292] usb 1-5: device descriptor read/8, error -110 [89564.316291] usb 1-5: device descriptor read/8, error -110 [89564.532036] usb 1-5: new high speed USB device using ehci_hcd and address 15 [89564.948019] usb 1-5: device not accepting address 15, error -71 [89564.948042] hub 1-0:1.0: unable to enumerate USB device on port 5 [89565.220058] usb 5-1: new full speed USB device using uhci_hcd and address 3 [89565.420060] usb 5-1: not running at top speed; connect to a high speed hub [89565.456292] scsi15 : usb-storage 5-1:1.0 [89566.460088] scsi 15:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [89566.463086] scsi 15:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [89566.466097] scsi 15:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [89566.469099] scsi 15:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [89566.470159] sd 15:0:0:0: Attached scsi generic sg3 type 0 [89566.472505] sd 15:0:0:1: Attached scsi generic sg4 type 0 [89566.472721] sd 15:0:0:2: Attached scsi generic sg5 type 0 [89566.472897] sd 15:0:0:3: Attached scsi generic sg6 type 0 [89566.571078] sd 15:0:0:2: [sde] Attached SCSI removable disk [89566.603082] sd 15:0:0:3: [sdf] Attached SCSI removable disk [89566.608155] sd 15:0:0:0: [sdc] Attached SCSI removable disk [89566.656084] sd 15:0:0:1: [sdd] Attached SCSI removable disk [90644.177024] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [90644.186978] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [90955.771835] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [90955.781789] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [91866.176848] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [91866.186803] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [168787.033623] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [168787.043683] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [169713.173950] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [169713.183902] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [171637.994713] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [171638.004830] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [172597.177798] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [172597.187741] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [181312.454406] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [181312.464617] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [183681.176949] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [183681.186897] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [190918.202105] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [190918.212078] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [191865.177914] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [191865.187862] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [192609.818696] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [192609.828653] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [193520.179422] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [193520.189374] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [198595.467113] sky2 0000:02:00.0: eth0: Link is down [198629.133521] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [198755.530797] sky2 0000:02:00.0: eth0: Link is down [198788.593223] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [221276.082805] VFS: busy inodes on changed media or resized disk sr0 [254738.330488] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [254738.340461] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [257467.177853] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [257467.187792] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [265771.358758] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [265771.368737] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [267922.175215] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [267922.185307] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [279670.212079] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [279670.222155] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [280580.179617] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [280580.189587] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [307936.470887] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [307936.481064] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [309596.178837] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [309596.188791] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [309880.079610] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [309880.089676] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [310821.182341] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [310821.192528] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [344299.484019] TCP: Peer 77.199.239.40:37449/33069 unexpectedly shrunk window 1592475129:1592481394 (repaired) [344301.232027] TCP: Peer 77.199.239.40:37449/33069 unexpectedly shrunk window 1592475129:1592481394 (repaired) [344304.728015] TCP: Peer 77.199.239.40:37449/33069 unexpectedly shrunk window 1592475129:1592481394 (repaired) [344311.712023] TCP: Peer 77.199.239.40:37449/33069 unexpectedly shrunk window 1592475129:1592481394 (repaired) [344325.696021] TCP: Peer 77.199.239.40:37449/33069 unexpectedly shrunk window 1592475129:1592481394 (repaired) [365562.032708] usb 1-6: USB disconnect, address 11 [365756.312376] sky2 0000:02:00.0: eth0: Link is down [365879.681281] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [397471.620368] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [397471.630340] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [398770.180274] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [398770.190226] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [399985.786081] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [399985.796054] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [404421.177532] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [404421.187480] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [409083.669574] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [409083.679537] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [410735.176297] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [410735.186247] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [410744.486186] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [410744.496158] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [424170.181887] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [424170.191831] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [428014.644822] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [428014.654794] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [429793.175559] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [429793.185510] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [434834.551488] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [434834.561465] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [435748.177267] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [435748.187212] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [435923.887855] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [435923.897830] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [439500.176848] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [439500.186803] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [441840.114118] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [441840.124090] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [442750.179708] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [442750.189659] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [488007.866452] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [488007.876406] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [488918.176853] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [488918.186803] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [500331.424517] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [500331.434484] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [510142.174728] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [510142.184677] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [510646.844480] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [510646.854448] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [511578.181236] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [511578.191181] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [513095.949363] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [513095.959328] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [516376.176856] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [516376.186810] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [528368.027212] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [528368.037189] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [529372.175321] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [529372.185271] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [530469.852049] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [530469.862013] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [531928.176885] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [531928.186822] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [590292.203058] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [590292.213157] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [598656.174159] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [598656.184114] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [604404.128330] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [604404.138299] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [606211.177926] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [606211.188030] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [649580.585601] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [649580.595563] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [650620.177674] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [650620.187616] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [652455.290696] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [652455.300646] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [653660.181022] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [653660.190987] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [666547.520109] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [666547.530071] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [669161.183656] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [669161.193603] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [674641.163219] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [674641.173171] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [675551.180878] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [675551.190825] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [690791.025412] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [690791.035378] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2)