[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-44-generic (buildd@lamiak) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #73-Ubuntu SMP Tue Dec 16 00:22:43 UTC 2014 (Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic root=UUID=e79b1ffb-57ac-43ea-9eba-2a14cea54c96 ro acpi=force irqpoll quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009cb7efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009cb7f000-0x000000009de7efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009e000000-0x00000000bf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff990000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP ProBook 440 G1/1944, BIOS L74 Ver. 01.09 04/29/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x13fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect [ 0.000000] 1 base 0000000000 mask 7F80000000 write-back [ 0.000000] 2 base 0080000000 mask 7FE0000000 write-back [ 0.000000] 3 base 009F000000 mask 7FFF000000 uncachable [ 0.000000] 4 base 0100000000 mask 7FC0000000 write-back [ 0.000000] 5 base 013FE00000 mask 7FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13fc00000-0x13fdfffff] [ 0.000000] [mem 0x13fc00000-0x13fdfffff] page 2M [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fbfffff] [ 0.000000] [mem 0x13c000000-0x13fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9cb7efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0x9c9fffff] page 2M [ 0.000000] [mem 0x9ca00000-0x9cb7efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9dfff000-0x9dffffff] [ 0.000000] [mem 0x9dfff000-0x9dffffff] page 4k [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x345de000-0x362e6fff] [ 0.000000] ACPI: RSDP 00000000000f2fe0 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009dffe120 00008C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009dffc000 00010C (v05 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: DSDT 000000009dfd2000 02411E (v02 HPQOEM 1944 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 000000009de31000 000040 [ 0.000000] ACPI: HPET 000000009dffb000 000038 (v01 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: APIC 000000009dffa000 0000BC (v01 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 000000009dff9000 00003C (v01 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: ASF! 000000009dff8000 0000A5 (v32 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 000000009dff7000 000032 (v02 HPQOEM 1944 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 000000009dfcf000 000421 (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 000000009dfce000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: FPDT 000000009dfcc000 000044 (v01 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 000000009dfcb000 000038 (v00 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 000000009dfca000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 000000009dfc9000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 000000009dfc8000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fdfffff] [ 0.000000] NODE_DATA [mem 0x13fdf9000-0x13fdfdfff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013bc00000-ffff88013f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x9cb7efff] [ 0.000000] node 0: [mem 0x9dfff000-0x9dffffff] [ 0.000000] node 0: [mem 0x100000000-0x13fdfffff] [ 0.000000] On node 0 totalpages: 903452 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9966 pages used for memmap [ 0.000000] DMA32 zone: 637824 pages, LIFO batch:31 [ 0.000000] Normal zone: 4088 pages used for memmap [ 0.000000] Normal zone: 261632 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cb7f000-0x9de7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9de7f000-0x9df7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9df7f000-0x9dffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0xbf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff98ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff990000-0xffffffff] [ 0.000000] e820: [mem 0xbf200000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fa00000 s82304 r8192 d24192 u262144 [ 0.000000] pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 889313 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic root=UUID=e79b1ffb-57ac-43ea-9eba-2a14cea54c96 ro acpi=force irqpoll quiet splash vt.handoff=7 [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3443136K/3613808K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 170672K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 14680064 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2394.302 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.60 BogoMIPS (lpj=9577208) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000029] Security Framework initialized [ 0.000046] AppArmor: AppArmor initialized [ 0.000047] Yama: becoming mindful. [ 0.000320] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001304] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001741] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001748] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001937] Initializing cgroup subsys memory [ 0.001942] Initializing cgroup subsys devices [ 0.001943] Initializing cgroup subsys freezer [ 0.001945] Initializing cgroup subsys blkio [ 0.001946] Initializing cgroup subsys perf_event [ 0.001948] Initializing cgroup subsys hugetlb [ 0.001969] CPU: Physical Processor ID: 0 [ 0.001970] CPU: Processor Core ID: 0 [ 0.001974] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.001974] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002896] mce: CPU supports 7 MCE banks [ 0.002907] CPU0: Thermal monitoring enabled (TM1) [ 0.002917] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.002917] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0 [ 0.002917] tlb_flushall_shift: 6 [ 0.003023] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.003987] ACPI: Core revision 20131115 [ 0.012075] ACPI: All ACPI Tables successfully acquired [ 0.029461] ftrace: allocating 28554 entries in 112 pages [ 0.041519] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081237] smpboot: CPU0: Intel(R) Core(TM) i3-4000M CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03) [ 0.081244] TSC deadline timer enabled [ 0.081254] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.081260] ... version: 3 [ 0.081261] ... bit width: 48 [ 0.081262] ... generic registers: 4 [ 0.081263] ... value mask: 0000ffffffffffff [ 0.081264] ... max period: 0000ffffffffffff [ 0.081264] ... fixed-purpose events: 3 [ 0.081265] ... event mask: 000000070000000f [ 0.082691] x86: Booting SMP configuration: [ 0.096806] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.082693] .... node #0, CPUs: #1 #2 #3 [ 0.125032] x86: Booted up 1 node, 4 CPUs [ 0.125035] smpboot: Total of 4 processors activated (19154.41 BogoMIPS) [ 0.128583] devtmpfs: initialized [ 0.131270] EVM: security.selinux [ 0.131271] EVM: security.SMACK64 [ 0.131272] EVM: security.ima [ 0.131273] EVM: security.capability [ 0.131314] PM: Registering ACPI NVS region [mem 0x9de7f000-0x9df7efff] (1048576 bytes) [ 0.131944] pinctrl core: initialized pinctrl subsystem [ 0.131989] regulator-dummy: no parameters [ 0.132017] RTC time: 15:24:48, date: 07/29/17 [ 0.132043] NET: Registered protocol family 16 [ 0.132125] cpuidle: using governor ladder [ 0.132126] cpuidle: using governor menu [ 0.132161] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.132162] ACPI: bus type PCI registered [ 0.132163] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.132212] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.132214] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.149918] PCI: Using configuration type 1 for base access [ 0.150036] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.150037] mtrr: probably your BIOS does not setup all CPUs. [ 0.150038] mtrr: corrected configuration. [ 0.150623] bio: create slab at 0 [ 0.150740] ACPI: Added _OSI(Module Device) [ 0.150741] ACPI: Added _OSI(Processor Device) [ 0.150742] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.150743] ACPI: Added _OSI(Processor Aggregator Device) [ 0.160462] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.180558] ACPI: SSDT 000000009dde3918 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.181007] ACPI: Dynamic OEM Table Load: [ 0.181009] ACPI: SSDT (null) 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.184667] ACPI: SSDT 000000009dde4698 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.185176] ACPI: Dynamic OEM Table Load: [ 0.185177] ACPI: SSDT (null) 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.188553] ACPI: SSDT 000000009dde2d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.188997] ACPI: Dynamic OEM Table Load: [ 0.188998] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 1.784809] ACPI: Interpreter enabled [ 1.784816] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 1.784821] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 1.784834] ACPI: (supports S0 S3 S4 S5) [ 1.784835] ACPI: Using IOAPIC for interrupt routing [ 1.784855] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.784996] ACPI: No dock devices found. [ 1.786118] ACPI: Power Resource [APPR] (off) [ 1.799470] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.799475] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.800709] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.801310] PCI host bridge to bus 0000:00 [ 1.801312] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.801314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.801315] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.801317] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.801318] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff] [ 1.801319] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff] [ 1.801321] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] [ 1.801328] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 1.801419] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 1.801429] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 1.801435] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.801439] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 1.801521] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 1.801528] pci 0000:00:03.0: reg 0x10: [mem 0xd0900000-0xd0903fff 64bit] [ 1.801639] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 1.801658] pci 0000:00:16.0: reg 0x10: [mem 0xd0909000-0xd090900f 64bit] [ 1.801719] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.801804] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 1.801824] pci 0000:00:1a.0: reg 0x10: [mem 0xd090e000-0xd090e3ff] [ 1.801907] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.801962] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 1.801990] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 1.802003] pci 0000:00:1b.0: reg 0x10: [mem 0xd0904000-0xd0907fff 64bit] [ 1.802064] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.802138] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 1.802199] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.802278] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400 [ 1.802339] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.802394] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 1.802418] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400 [ 1.802479] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 1.802535] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 1.802558] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400 [ 1.802619] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.802677] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 1.802705] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 1.802725] pci 0000:00:1d.0: reg 0x10: [mem 0xd090d000-0xd090d3ff] [ 1.802809] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.802868] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1.802898] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100 [ 1.803076] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 1.803093] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 1.803101] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 1.803109] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 1.803116] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 1.803124] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 1.803132] pci 0000:00:1f.2: reg 0x24: [mem 0xd090c000-0xd090c7ff] [ 1.803168] pci 0000:00:1f.2: PME# supported from D3hot [ 1.803288] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.803294] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 1.803368] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.803385] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 1.803414] pci 0000:02:00.0: reg 0x18: [mem 0xd0700000-0xd0700fff 64bit] [ 1.803433] pci 0000:02:00.0: reg 0x20: [mem 0xd0400000-0xd0403fff 64bit pref] [ 1.803507] pci 0000:02:00.0: supports D1 D2 [ 1.803509] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.803542] pci 0000:02:00.0: System wakeup disabled by ACPI [ 1.811121] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 1.811125] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 1.811129] pci 0000:00:1c.5: bridge window [mem 0xd0700000-0xd07fffff] [ 1.811134] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 1.811194] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000 [ 1.811218] pci 0000:03:00.0: reg 0x10: [mem 0xd0600000-0xd067ffff 64bit] [ 1.811270] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 1.811324] pci 0000:03:00.0: supports D1 D2 [ 1.811325] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.819129] pci 0000:00:1c.6: PCI bridge to [bus 03] [ 1.819134] pci 0000:00:1c.6: bridge window [mem 0xd0600000-0xd06fffff] [ 1.819197] pci 0000:04:00.0: [10ec:5227] type 00 class 0xff0000 [ 1.819214] pci 0000:04:00.0: reg 0x10: [mem 0xd0500000-0xd0500fff] [ 1.819329] pci 0000:04:00.0: supports D1 D2 [ 1.819331] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.827141] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 1.827147] pci 0000:00:1c.7: bridge window [mem 0xd0500000-0xd05fffff] [ 1.827175] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 1.827862] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.827901] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.827939] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.827975] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.828011] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.828046] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.828083] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.828118] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.828483] ACPI: Enabled 4 GPEs in block 00 to 3F [ 1.828490] ACPI: \_SB_.PCI0: notify handler is installed [ 1.828566] Found 1 acpi root devices [ 1.828623] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 1.828698] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.828699] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.828702] vgaarb: loaded [ 1.828703] vgaarb: bridge control possible 0000:00:02.0 [ 1.828826] SCSI subsystem initialized [ 1.828868] libata version 3.00 loaded. [ 1.828896] ACPI: bus type USB registered [ 1.828909] usbcore: registered new interface driver usbfs [ 1.828915] usbcore: registered new interface driver hub [ 1.828936] usbcore: registered new device driver usb [ 1.829021] PCI: Using ACPI for IRQ routing [ 1.834528] PCI: pci_cache_line_size set to 64 bytes [ 1.834572] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 1.834574] e820: reserve RAM buffer [mem 0x9cb7f000-0x9fffffff] [ 1.834575] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff] [ 1.834576] e820: reserve RAM buffer [mem 0x13fe00000-0x13fffffff] [ 1.834646] NetLabel: Initializing [ 1.834648] NetLabel: domain hash size = 128 [ 1.834648] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.834658] NetLabel: unlabeled traffic allowed by default [ 1.834716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.834720] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.837751] Switched to clocksource hpet [ 1.841494] AppArmor: AppArmor Filesystem Enabled [ 1.841513] pnp: PnP ACPI init [ 1.841523] ACPI: bus type PNP registered [ 1.841702] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.841705] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 1.841707] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.841708] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.841710] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 1.841711] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.841713] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.841714] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.841716] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.841717] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved [ 1.841720] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.841835] pnp 00:01: [dma 4] [ 1.841854] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.841871] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 1.841956] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.841995] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.842028] system 00:05: [io 0x0200-0x027f] has been reserved [ 1.842029] system 00:05: [io 0xffff] has been reserved [ 1.842031] system 00:05: [io 0xffff] has been reserved [ 1.842032] system 00:05: [io 0xffff] has been reserved [ 1.842034] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 1.842035] system 00:05: [io 0xef80-0xef9f] has been reserved [ 1.842037] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.842071] system 00:06: [io 0x0800-0x087f] has been reserved [ 1.842073] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.842095] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.842180] pnp 00:08: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 1.842201] pnp 00:09: Plug and Play ACPI device, IDs SYN300e SYN0100 SYN0002 PNP0f13 (active) [ 1.842375] pnp 00:0a: Plug and Play ACPI device, IDs HPQ6007 (active) [ 1.842437] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved [ 1.842439] system 00:0b: [mem 0x40004000-0x40004fff] could not be reserved [ 1.842441] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.842608] pnp 00:0c: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 1.842620] pnp: PnP ACPI: found 13 devices [ 1.842621] ACPI: bus type PNP unregistered [ 1.848601] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 1.848631] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 1.848635] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 [ 1.848638] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.848640] pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.848644] pci 0000:00:1c.6: BAR 15: assigned [mem 0xbf300000-0xbf3fffff pref] [ 1.848646] pci 0000:00:1c.7: BAR 15: assigned [mem 0xbf400000-0xbf5fffff 64bit pref] [ 1.848648] pci 0000:00:1c.7: BAR 13: assigned [io 0x2000-0x2fff] [ 1.848650] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.848655] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 1.848664] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 1.848667] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 1.848671] pci 0000:00:1c.5: bridge window [mem 0xd0700000-0xd07fffff] [ 1.848675] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 1.848681] pci 0000:03:00.0: BAR 6: assigned [mem 0xbf300000-0xbf30ffff pref] [ 1.848683] pci 0000:00:1c.6: PCI bridge to [bus 03] [ 1.848687] pci 0000:00:1c.6: bridge window [mem 0xd0600000-0xd06fffff] [ 1.848691] pci 0000:00:1c.6: bridge window [mem 0xbf300000-0xbf3fffff pref] [ 1.848697] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 1.848700] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff] [ 1.848704] pci 0000:00:1c.7: bridge window [mem 0xd0500000-0xd05fffff] [ 1.848708] pci 0000:00:1c.7: bridge window [mem 0xbf400000-0xbf5fffff 64bit pref] [ 1.848714] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.848716] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.848717] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.848718] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff] [ 1.848720] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff] [ 1.848721] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff] [ 1.848722] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff] [ 1.848724] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 1.848725] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff] [ 1.848727] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref] [ 1.848728] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.848729] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf3fffff pref] [ 1.848731] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 1.848732] pci_bus 0000:04: resource 1 [mem 0xd0500000-0xd05fffff] [ 1.848733] pci_bus 0000:04: resource 2 [mem 0xbf400000-0xbf5fffff 64bit pref] [ 1.848759] NET: Registered protocol family 2 [ 1.848927] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.849003] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.849107] TCP: Hash tables configured (established 32768 bind 32768) [ 1.849125] TCP: reno registered [ 1.849132] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.849149] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.849206] NET: Registered protocol family 1 [ 1.849215] pci 0000:00:02.0: Video device with shadowed ROM [ 1.849544] PCI: CLS 64 bytes, default 64 [ 1.849585] Trying to unpack rootfs image as initramfs... [ 2.281925] Freeing initrd memory: 29732K (ffff8800345de000 - ffff8800362e7000) [ 2.281930] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.281933] software IO TLB [mem 0x98b7f000-0x9cb7f000] (64MB) mapped at [ffff880098b7f000-ffff88009cb7efff] [ 2.282101] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x17 [ 2.282107] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x17 [ 2.282120] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x17 [ 2.282127] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x17 [ 2.282175] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.282177] Scanning for low memory corruption every 60 seconds [ 2.282412] Initialise system trusted keyring [ 2.282449] audit: initializing netlink socket (disabled) [ 2.282457] type=2000 audit(1501341889.264:1): initialized [ 2.306779] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.307570] zbud: loaded [ 2.307689] VFS: Disk quotas dquot_6.5.2 [ 2.307720] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.308039] fuse init (API version 7.22) [ 2.308091] msgmni has been set to 6783 [ 2.308132] Key type big_key registered [ 2.308503] Key type asymmetric registered [ 2.308505] Asymmetric key parser 'x509' registered [ 2.308526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.308557] io scheduler noop registered [ 2.308558] io scheduler deadline registered (default) [ 2.308575] io scheduler cfq registered [ 2.308752] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 2.308890] pcieport 0000:00:1c.5: irq 41 for MSI/MSI-X [ 2.309017] pcieport 0000:00:1c.6: irq 42 for MSI/MSI-X [ 2.309144] pcieport 0000:00:1c.7: irq 43 for MSI/MSI-X [ 2.309215] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.309220] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.309233] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 2.309235] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.309239] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 2.309253] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt [ 2.309254] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.309258] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded [ 2.309272] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt [ 2.309274] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 2.309277] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded [ 2.309286] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.309309] pciehp 0000:00:1c.7:pcie04: HPC vendor_id 8086 device_id 8c1e ss_vid 103c ss_did 1944 [ 2.309336] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded [ 2.309339] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.309367] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 2.309368] vesafb: scrolling: redraw [ 2.309369] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.309675] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 4160k, total 4160k [ 2.393215] Console: switching to colour frame buffer device 170x48 [ 2.476478] fb0: VESA VGA frame buffer device [ 2.476491] intel_idle: MWAIT substates: 0x42120 [ 2.476492] intel_idle: v0.4 model 0x3C [ 2.476493] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.476575] ipmi message handler version 39.2 [ 2.902738] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.902854] ACPI: AC Adapter [AC] (off-line) [ 2.902916] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 2.902920] ACPI: Sleep Button [SLPB] [ 2.902943] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 2.902961] ACPI: Lid Switch [LID] [ 2.902984] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.902986] ACPI: Power Button [PWRF] [ 2.927625] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.927628] ACPI: Thermal Zone [CPUZ] (41 C) [ 2.951622] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.951625] ACPI: Thermal Zone [GFXZ] (0 C) [ 2.966615] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.966619] ACPI: Thermal Zone [EXTZ] (28 C) [ 2.981592] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.981595] ACPI: Thermal Zone [LOCZ] (28 C) [ 2.996650] thermal LNXTHERM:04: registered as thermal_zone4 [ 2.996654] ACPI: Thermal Zone [BATZ] (28 C) [ 2.996898] thermal LNXTHERM:05: registered as thermal_zone5 [ 2.996899] ACPI: Thermal Zone [PCHZ] (114 C) [ 2.996971] thermal LNXTHERM:06: registered as thermal_zone6 [ 2.996972] ACPI: Thermal Zone [DM1Z] (0 C) [ 2.997040] thermal LNXTHERM:07: registered as thermal_zone7 [ 2.997041] ACPI: Thermal Zone [DM2Z] (0 C) [ 2.997077] GHES: HEST is not enabled! [ 2.997194] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.998871] Linux agpgart interface v0.103 [ 2.998951] tpm_tis 00:0c: 1.2 TPM (device-id 0xB, rev-id 16) [ 3.044837] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 3.044843] ACPI: Battery Slot [BAT0] (battery present) [ 3.278970] tsc: Refined TSC clocksource calibration: 2394.455 MHz [ 3.286990] tpm_tis 00:0c: TPM is disabled/deactivated (0x7) [ 3.287952] brd: module loaded [ 3.288440] loop: module loaded [ 3.288699] libphy: Fixed MDIO Bus: probed [ 3.288757] tun: Universal TUN/TAP device driver, 1.6 [ 3.288758] tun: (C) 1999-2004 Max Krasnyansky [ 3.288792] PPP generic driver version 2.4.2 [ 3.288829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.288831] ehci-pci: EHCI PCI platform driver [ 3.288959] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.288963] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.288975] ehci-pci 0000:00:1a.0: debug port 2 [ 3.292880] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.292898] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd090e000 [ 3.302943] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.302974] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.302976] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.302977] usb usb1: Product: EHCI Host Controller [ 3.302978] usb usb1: Manufacturer: Linux 3.13.0-44-generic ehci_hcd [ 3.302979] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.303068] hub 1-0:1.0: USB hub found [ 3.303072] hub 1-0:1.0: 2 ports detected [ 3.303246] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.303249] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.303260] ehci-pci 0000:00:1d.0: debug port 2 [ 3.307173] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.307189] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd090d000 [ 3.318956] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.318984] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.318985] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.318987] usb usb2: Product: EHCI Host Controller [ 3.318988] usb usb2: Manufacturer: Linux 3.13.0-44-generic ehci_hcd [ 3.318989] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.319065] hub 2-0:1.0: USB hub found [ 3.319069] hub 2-0:1.0: 2 ports detected [ 3.319153] ehci-platform: EHCI generic platform driver [ 3.319159] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.319160] ohci-pci: OHCI PCI platform driver [ 3.319166] ohci-platform: OHCI generic platform driver [ 3.319170] uhci_hcd: USB Universal Host Controller Interface driver [ 3.319211] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.321043] i8042: Detected active multiplexing controller, rev 1.1 [ 3.321778] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.321782] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.321797] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.321809] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.321818] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.321896] mousedev: PS/2 mouse device common for all mice [ 3.322018] rtc_cmos 00:07: RTC can wake from S4 [ 3.322122] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 3.322147] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.322194] device-mapper: uevent: version 1.0.3 [ 3.322243] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 3.322249] ledtrig-cpu: registered to indicate activity on CPUs [ 3.322321] TCP: cubic registered [ 3.322383] NET: Registered protocol family 10 [ 3.322510] NET: Registered protocol family 17 [ 3.322519] Key type dns_resolver registered [ 3.322698] Loading compiled-in X.509 certificates [ 3.323455] Loaded X.509 cert 'Magrathea: Glacier signing key: 508c3b4bf108ed36b6062f812782f77c37b98537' [ 3.323464] registered taskstats version 1 [ 3.325178] Key type trusted registered [ 3.326561] Key type encrypted registered [ 3.327874] AppArmor: AppArmor sha1 policy hashing enabled [ 3.346619] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.387069] tpm_tis 00:0c: A TPM error (7) occurred attempting to read a pcr value [ 3.387073] IMA: No TPM chip found, activating TPM-bypass! [ 3.387450] regulator-dummy: disabling [ 3.387510] Magic number: 9:152:438 [ 3.387612] rtc_cmos 00:07: setting system clock to 2017-07-29 15:24:51 UTC (1501341891) [ 3.388324] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.388326] EDD information not available. [ 3.388357] PM: Hibernation image not present or could not be loaded. [ 3.389057] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 3.389059] Write protecting the kernel read-only data: 12288k [ 3.390918] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000) [ 3.392388] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000) [ 3.404493] systemd-udevd[125]: starting version 204 [ 3.414817] video: module verification failed: signature and/or required key missing - tainting kernel [ 3.422536] wmi: Mapper loaded [ 3.425056] [drm] Initialized drm 1.1.0 20060810 [ 3.427117] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.427136] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.430640] rtsx_pci 0000:04:00.0: irq 44 for MSI/MSI-X [ 3.430657] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44 [ 3.431707] [drm] Memory usable by graphics device = 2048M [ 3.431712] checking generic (c0000000 410000) vs hw (c0000000 10000000) [ 3.431714] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 3.431729] Console: switching to colour dummy device 80x25 [ 3.436093] r8169 0000:02:00.0: irq 45 for MSI/MSI-X [ 3.436305] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc9000063c000, 14:58:d0:17:7d:07, XID 0c000800 IRQ 45 [ 3.436308] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.483230] i915 0000:00:02.0: irq 46 for MSI/MSI-X [ 3.483246] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.483247] [drm] Driver supports precise vblank timestamp query. [ 3.483307] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.516954] [drm] VBT doesn't support DRRS [ 3.619274] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.700961] fbcon: inteldrmfb (fb0) is primary device [ 3.751689] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 3.751691] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.751977] hub 1-1:1.0: USB hub found [ 3.752094] hub 1-1:1.0: 6 ports detected [ 3.863499] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.996083] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 3.996085] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.996290] hub 2-1:1.0: USB hub found [ 3.996390] hub 2-1:1.0: 8 ports detected [ 4.067733] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 4.139792] usb 1-1.1: device descriptor read/64, error -32 [ 4.279870] Switched to clocksource tsc [ 4.315927] usb 1-1.1: device descriptor read/64, error -32 [ 4.373698] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400, board id: 2653, fw id: 1481159 [ 4.418104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 4.492079] usb 1-1.1: new full-speed USB device number 4 using ehci-pci [ 4.564137] usb 1-1.1: device descriptor read/64, error -32 [ 4.724124] Console: switching to colour frame buffer device 170x48 [ 4.728708] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.728710] i915 0000:00:02.0: registered panic notifier [ 4.733285] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.733398] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 4.733475] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.733495] ahci 0000:00:1f.2: version 3.0 [ 4.733679] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X [ 4.733739] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x30 impl SATA mode [ 4.733744] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 4.740244] usb 1-1.1: device descriptor read/64, error -32 [ 4.740578] scsi0 : ahci [ 4.740674] scsi1 : ahci [ 4.740749] scsi2 : ahci [ 4.740824] scsi3 : ahci [ 4.740895] scsi4 : ahci [ 4.740966] scsi5 : ahci [ 4.741005] ata1: DUMMY [ 4.741007] ata2: DUMMY [ 4.741008] ata3: DUMMY [ 4.741010] ata4: DUMMY [ 4.741013] ata5: SATA max UDMA/133 abar m2048@0xd090c000 port 0xd090c300 irq 47 [ 4.741015] ata6: SATA max UDMA/133 abar m2048@0xd090c000 port 0xd090c380 irq 47 [ 4.836307] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 4.916407] usb 1-1.1: new full-speed USB device number 5 using ehci-pci [ 5.060432] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.060451] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.061606] ata5.00: ATA-8: TOSHIBA MQ01ABF050, AM0P2C, max UDMA/100 [ 5.061610] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.063222] ata5.00: configured for UDMA/100 [ 5.063361] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.063367] ata6.00: ATAPI: hp DVDRAM GU90N, U900, max UDMA/100 [ 5.063389] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 AM0P PQ: 0 ANSI: 5 [ 5.063510] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.063513] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 5.063540] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 5.063545] sd 4:0:0:0: [sda] Write Protect is off [ 5.063548] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.063560] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.065695] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.065704] ata6.00: configured for UDMA/100 [ 5.069628] scsi 5:0:0:0: CD-ROM hp DVDRAM GU90N U900 PQ: 0 ANSI: 5 [ 5.075260] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.075264] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.075399] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 5.075471] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 5.174523] sda: sda1 sda2 < sda5 > [ 5.174934] sd 4:0:0:0: [sda] Attached SCSI disk [ 5.324575] usb 1-1.1: device not accepting address 5, error -32 [ 5.396763] usb 1-1.1: new full-speed USB device number 6 using ehci-pci [ 5.804963] usb 1-1.1: device not accepting address 6, error -32 [ 5.805094] hub 1-1:1.0: unable to enumerate USB device on port 1 [ 5.877159] usb 1-1.3: new high-speed USB device number 7 using ehci-pci [ 6.016963] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b3c8 [ 6.016967] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 6.016968] usb 1-1.3: Product: HP HD Webcam [ 6.016970] usb 1-1.3: Manufacturer: Generic [ 6.016971] usb 1-1.3: SerialNumber: 200901010001 [ 6.089325] usb 1-1.6: new full-speed USB device number 8 using ehci-pci [ 6.182403] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=311f [ 6.182408] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.229299] raid6: sse2x1 7189 MB/s [ 6.253455] usb 2-1.2: new high-speed USB device number 3 using ehci-pci [ 6.297359] raid6: sse2x2 9033 MB/s [ 6.365407] raid6: sse2x4 10443 MB/s [ 6.411470] usb 2-1.2: New USB device found, idVendor=0bc2, idProduct=ab24 [ 6.411473] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 6.411475] usb 2-1.2: Product: BUP Slim BK [ 6.411477] usb 2-1.2: Manufacturer: Seagate [ 6.411478] usb 2-1.2: SerialNumber: NA966T1D [ 6.415517] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 6.415590] scsi6 : usb-storage 2-1.2:1.0 [ 6.415656] usbcore: registered new interface driver usb-storage [ 6.433462] raid6: avx2x1 13647 MB/s [ 6.481640] usb 2-1.3: new high-speed USB device number 4 using ehci-pci [ 6.501518] raid6: avx2x2 16106 MB/s [ 6.569572] raid6: avx2x4 18968 MB/s [ 6.569574] raid6: using algorithm avx2x4 (18968 MB/s) [ 6.569575] raid6: using avx2x2 recovery algorithm [ 6.570594] xor: automatically using best checksumming function: [ 6.575854] usb 2-1.3: New USB device found, idVendor=054c, idProduct=0b7d [ 6.575857] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.575858] usb 2-1.3: Product: Hard Drive [ 6.575860] usb 2-1.3: Manufacturer: Sony [ 6.575861] usb 2-1.3: SerialNumber: 46A287951076 [ 6.576125] usb-storage 2-1.3:1.0: USB Mass Storage device detected [ 6.576182] scsi7 : usb-storage 2-1.3:1.0 [ 6.609601] avx : 22752.000 MB/sec [ 6.619340] bio: create slab at 1 [ 6.619585] Btrfs loaded [ 6.831151] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.058133] random: nonblocking pool is initialized [ 7.415099] scsi 6:0:0:0: Direct-Access Seagate BUP Slim BK 0304 PQ: 0 ANSI: 6 [ 7.415357] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 7.415937] sd 6:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB) [ 9.491382] sd 6:0:0:0: [sdb] Write Protect is off [ 9.491387] sd 6:0:0:0: [sdb] Mode Sense: 4f 00 00 00 [ 9.492488] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.531929] sdb: sdb1 [ 9.534989] sd 6:0:0:0: [sdb] Attached SCSI disk [ 9.841944] scsi 7:0:0:0: Direct-Access Sony Hard Drive 5438 PQ: 0 ANSI: 6 [ 9.842165] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 9.842747] sd 7:0:0:0: [sdc] 1953525164 512-byte logical blocks: (1.00 TB/931 GiB) [ 9.843517] sd 7:0:0:0: [sdc] Write Protect is off [ 9.843520] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 9.844232] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.853642] sdc: sdc1 [ 9.856246] sd 7:0:0:0: [sdc] Attached SCSI disk [ 24.670690] Adding 4071420k swap on /dev/sda5. Priority:-1 extents:1 across:4071420k FS [ 24.801570] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.003344] systemd-udevd[389]: starting version 204 [ 25.151459] Initializing HPQ6001 module [ 25.151526] input: HP Wireless hotkeys as /devices/virtual/input/input13 [ 25.160187] hp_accel: laptop model unknown, using default axes configuration [ 25.184501] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 25.187578] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X [ 25.200755] cfg80211: Calling CRDA to update world regulatory domain [ 25.222882] lp: driver loaded but no devices found [ 25.224536] type=1400 audit(1501341913.312:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=453 comm="apparmor_parser" [ 25.224542] type=1400 audit(1501341913.312:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=453 comm="apparmor_parser" [ 25.224546] type=1400 audit(1501341913.312:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=453 comm="apparmor_parser" [ 25.228253] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 25.228262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 25.228266] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251) [ 25.228271] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251) [ 25.228275] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 25.228277] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251) [ 25.228281] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251) [ 25.228285] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251) [ 25.228288] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_T 4 (20131115/utaddress-251) [ 25.228292] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 25.228294] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 25.236199] ath: phy0: WB335 1-ANT card detected [ 25.236204] ath: phy0: Set BT/WLAN RX diversity capability [ 25.244025] ath: phy0: Enable LNA combining [ 25.245343] ath: EEPROM regdomain: 0x6a [ 25.245346] ath: EEPROM indicates we should expect a direct regpair map [ 25.245349] ath: Country alpha2 being used: 00 [ 25.245350] ath: Regpair used: 0x6a [ 25.259894] ppdev: user-space parallel port driver [ 25.263539] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 25.264058] ieee80211 phy0: Atheros AR9565 Rev:0 mem=0xffffc90021600000, irq=18 [ 25.270848] wl: module license 'MIXED/Proprietary' taints kernel. [ 25.270853] Disabling lock debugging due to kernel taint [ 25.280980] device-mapper: multipath: version 1.6.0 loaded [ 25.288888] lis3lv02d: 8 bits 3DC sensor found [ 25.338093] HDA driver get symbol successfully from i915 module [ 25.338337] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 25.345384] snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X [ 25.356955] mute LED gpio 1 polarity 0 [ 25.357123] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 25.357125] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.357126] hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 25.357128] mono: mono_out=0x0 [ 25.357129] inputs: [ 25.357130] Internal Mic=0x11 [ 25.357132] Mic=0xc [ 25.372609] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 25.372691] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 25.372787] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 25.398100] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 25.398252] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 25.533173] input: HP WMI hotkeys as /devices/virtual/input/input17 [ 25.631518] cfg80211: World regulatory domain updated: [ 25.631522] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.631523] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.631525] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.631526] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 25.631527] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.631528] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.851582] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 26.683245] init: failsafe main process (763) killed by TERM signal [ 26.736034] Bluetooth: Core ver 2.17 [ 26.736054] NET: Registered protocol family 31 [ 26.736056] Bluetooth: HCI device and connection manager initialized [ 26.736411] Bluetooth: HCI socket layer initialized [ 26.736415] Bluetooth: L2CAP socket layer initialized [ 26.736421] Bluetooth: SCO socket layer initialized [ 26.786562] usbcore: registered new interface driver btusb [ 26.801946] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input20 [ 27.405416] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.405420] Bluetooth: BNEP filters: protocol multicast [ 27.405428] Bluetooth: BNEP socket layer initialized [ 27.407145] type=1400 audit(1501341915.496:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=951 comm="apparmor_parser" [ 27.407154] type=1400 audit(1501341915.496:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=951 comm="apparmor_parser" [ 27.407160] type=1400 audit(1501341915.496:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=951 comm="apparmor_parser" [ 27.408714] type=1400 audit(1501341915.496:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=957 comm="apparmor_parser" [ 27.410465] type=1400 audit(1501341915.500:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=956 comm="apparmor_parser" [ 27.410473] type=1400 audit(1501341915.500:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=956 comm="apparmor_parser" [ 27.410478] type=1400 audit(1501341915.500:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=956 comm="apparmor_parser" [ 27.411521] Bluetooth: RFCOMM TTY layer initialized [ 27.411533] Bluetooth: RFCOMM socket layer initialized [ 27.411538] Bluetooth: RFCOMM ver 1.11 [ 27.997452] init: cups main process (971) killed by HUP signal [ 27.997461] init: cups main process ended, respawning [ 29.095974] Linux video capture interface: v2.00 [ 29.148241] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3c8) [ 29.149909] input: HP HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input21 [ 29.150020] usbcore: registered new interface driver uvcvideo [ 29.150023] USB Video Class driver (1.1.1) [ 29.765577] init: samba-ad-dc main process (1075) terminated with status 1 [ 30.907873] init: plymouth-upstart-bridge main process ended, respawning [ 30.915276] init: plymouth-upstart-bridge main process (1404) terminated with status 1 [ 30.915286] init: plymouth-upstart-bridge main process ended, respawning [ 31.163519] r8169 0000:02:00.0 eth0: link down [ 31.163562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.163824] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.176877] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.180205] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.320940] usb 1-1.1: new full-speed USB device number 9 using ehci-pci [ 35.392994] usb 1-1.1: device descriptor read/64, error -32 [ 35.569207] usb 1-1.1: device descriptor read/64, error -32 [ 35.745319] usb 1-1.1: new full-speed USB device number 10 using ehci-pci [ 35.817407] usb 1-1.1: device descriptor read/64, error -32 [ 35.993523] usb 1-1.1: device descriptor read/64, error -32 [ 36.169693] usb 1-1.1: new full-speed USB device number 11 using ehci-pci [ 36.577846] usb 1-1.1: device not accepting address 11, error -32 [ 36.650087] usb 1-1.1: new full-speed USB device number 12 using ehci-pci [ 37.058235] usb 1-1.1: device not accepting address 12, error -32 [ 37.058413] hub 1-1:1.0: unable to enumerate USB device on port 1 [ 53.812124] init: plymouth-stop pre-start process (1809) terminated with status 1 [ 57.683016] audit_printk_skb: 63 callbacks suppressed [ 57.683019] type=1400 audit(1501341945.748:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1830 comm="apparmor_parser" [ 57.683024] type=1400 audit(1501341945.748:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1830 comm="apparmor_parser" [ 139.316485] r8169 0000:02:00.0 eth0: link up [ 139.316502] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 146.522046] r8169 0000:02:00.0 eth0: link down [ 150.570117] usb 2-1.4: new high-speed USB device number 5 using ehci-pci [ 150.662501] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101 [ 150.662505] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 150.662507] usb 2-1.4: Product: USB 2.0 Hub [ 150.662746] hub 2-1.4:1.0: USB hub found [ 150.662840] hub 2-1.4:1.0: 4 ports detected [ 150.893461] r8169 0000:02:00.0 eth0: link up [ 179.323713] usb 2-1.4: USB disconnect, device number 5 [ 181.570988] usb 2-1.4: new high-speed USB device number 6 using ehci-pci [ 181.663859] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101 [ 181.663869] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 181.663874] usb 2-1.4: Product: USB 2.0 Hub [ 181.664426] hub 2-1.4:1.0: USB hub found [ 181.664519] hub 2-1.4:1.0: 4 ports detected [ 182.075422] usb 2-1.4.1: new full-speed USB device number 7 using ehci-pci [ 182.170041] usb 2-1.4.1: New USB device found, idVendor=3938, idProduct=1032 [ 182.170051] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 182.170056] usb 2-1.4.1: Product: 2.4G RF Keyboard & Mouse [ 182.170060] usb 2-1.4.1: Manufacturer: MOSART Semi. [ 182.747762] hidraw: raw HID events driver (C) Jiri Kosina [ 182.764187] usbcore: registered new interface driver usbhid [ 182.764190] usbhid: USB HID core driver [ 182.778489] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input22 [ 182.778716] hid-generic 0003:3938:1032.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-0000:00:1d.0-1.4.1/input0 [ 182.779143] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.1/input/input23 [ 182.779582] hid-generic 0003:3938:1032.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-0000:00:1d.0-1.4.1/input1 [ 185.037753] wlan0: authenticate with 1c:5f:2b:44:43:70 [ 185.052611] wlan0: send auth to 1c:5f:2b:44:43:70 (try 1/3) [ 185.054527] wlan0: authenticated [ 185.057596] wlan0: associate with 1c:5f:2b:44:43:70 (try 1/3) [ 185.062133] wlan0: RX AssocResp from 1c:5f:2b:44:43:70 (capab=0x411 status=0 aid=1) [ 185.062179] wlan0: associated [ 185.062199] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 203.607356] usb 2-1.4.4: new high-speed USB device number 8 using ehci-pci [ 203.700300] usb 2-1.4.4: New USB device found, idVendor=03f0, idProduct=e211 [ 203.700303] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 203.700305] usb 2-1.4.4: Product: DeskJet 4720 series [ 203.700306] usb 2-1.4.4: Manufacturer: HP [ 203.700307] usb 2-1.4.4: SerialNumber: CN73A4H3D3069D [ 205.644474] usblp 2-1.4.4:1.1: usblp1: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE211 [ 205.644559] usbcore: registered new interface driver usblp [ 206.651435] usb 1-1.1: new full-speed USB device number 13 using ehci-pci [ 206.723504] usb 1-1.1: device descriptor read/64, error -32 [ 206.899768] usb 1-1.1: device descriptor read/64, error -32 [ 207.075921] usb 1-1.1: new full-speed USB device number 14 using ehci-pci [ 207.148088] usb 1-1.1: device descriptor read/64, error -32 [ 207.324230] usb 1-1.1: device descriptor read/64, error -32 [ 207.500514] usb 1-1.1: new full-speed USB device number 15 using ehci-pci [ 207.908969] usb 1-1.1: device not accepting address 15, error -32 [ 207.981172] usb 1-1.1: new full-speed USB device number 16 using ehci-pci [ 208.176673] type=1400 audit(1501342096.115:35): apparmor="DENIED" operation="file_lock" profile="/usr/share/hplip/systray.py" name="/etc/xdg/Trolltech.conf" pid=2672 comm="python" requested_mask="k" denied_mask="k" fsuid=1000 ouid=0 [ 208.389567] usb 1-1.1: device not accepting address 16, error -32 [ 208.389717] hub 1-1:1.0: unable to enumerate USB device on port 1 [ 209.879702] usb 1-1.1: new full-speed USB device number 17 using ehci-pci [ 209.951764] usb 1-1.1: device descriptor read/64, error -32 [ 210.128031] usb 1-1.1: device descriptor read/64, error -32 [ 210.251521] type=1400 audit(1501342098.186:36): apparmor="DENIED" operation="file_lock" profile="/usr/share/hplip/systray.py" name="/etc/xdg/sni-qt.conf" pid=2672 comm="python" requested_mask="k" denied_mask="k" fsuid=1000 ouid=0 [ 210.304150] usb 1-1.1: new full-speed USB device number 18 using ehci-pci [ 210.376332] usb 1-1.1: device descriptor read/64, error -32 [ 210.552471] usb 1-1.1: device descriptor read/64, error -32 [ 210.728762] usb 1-1.1: new full-speed USB device number 19 using ehci-pci [ 211.137219] usb 1-1.1: device not accepting address 19, error -32 [ 211.209401] usb 1-1.1: new full-speed USB device number 20 using ehci-pci [ 211.617774] usb 1-1.1: device not accepting address 20, error -32 [ 211.617852] hub 1-1:1.0: unable to enumerate USB device on port 1 [ 213.587375] r8169 0000:02:00.0 eth0: link down [ 215.029296] cfg80211: Calling CRDA to update world regulatory domain [ 215.034487] cfg80211: World regulatory domain updated: [ 215.034490] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 215.034493] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 215.034495] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 215.034496] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 215.034498] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 215.034500] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 218.204301] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 230.604881] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 258.907485] r8169 0000:02:00.0 eth0: link up [ 258.907493] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 266.034462] r8169 0000:02:00.0 eth0: link down [ 270.362946] r8169 0000:02:00.0 eth0: link up [ 291.164697] wlan0: authenticate with 1c:5f:2b:44:43:70 [ 291.179640] wlan0: send auth to 1c:5f:2b:44:43:70 (try 1/3) [ 291.181963] wlan0: authenticated [ 291.185726] wlan0: associate with 1c:5f:2b:44:43:70 (try 1/3) [ 291.190168] wlan0: RX AssocResp from 1c:5f:2b:44:43:70 (capab=0x411 status=0 aid=1) [ 291.190212] wlan0: associated [ 291.190234] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 294.755174] type=1400 audit(1501342182.580:37): apparmor="DENIED" operation="exec" profile="/usr/share/hplip/systray.py" name="/usr/bin/curl" pid=3273 comm="hp-upgrade" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0 [ 294.882873] type=1400 audit(1501342182.708:38): apparmor="DENIED" operation="exec" profile="/usr/share/hplip/systray.py" name="/bin/ping" pid=3274 comm="hp-upgrade" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0 [ 1563.604802] systemd-hostnamed[3408]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 1622.247646] wlan0: deauthenticating from 1c:5f:2b:44:43:70 by local choice (reason=3) [ 1622.261532] cfg80211: Calling CRDA to update world regulatory domain [ 1622.984308] cfg80211: World regulatory domain updated: [ 1622.984311] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1622.984313] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1622.984314] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1622.984315] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1622.984316] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1622.984317] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1920.496301] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0). [ 1920.496311] atkbd serio0: Use 'setkeycodes e027 ' to make it known. [ 1924.978557] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0). [ 1924.978567] atkbd serio0: Use 'setkeycodes e027 ' to make it known. [ 1947.993480] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0). [ 1947.993486] atkbd serio0: Use 'setkeycodes e027 ' to make it known. [ 1960.248982] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0). [ 1960.248988] atkbd serio0: Use 'setkeycodes e027 ' to make it known. [ 2614.498074] hid-generic 0003:3938:1032.0002: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 2614.502045] usb 2-1.4: clear tt 1 (0070) error -71 [ 2614.506057] hid-generic 0003:3938:1032.0001: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 2614.510052] usb 2-1.4: clear tt 1 (0070) error -71 [ 2614.514070] hid-generic 0003:3938:1032.0002: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 2614.518055] usb 2-1.4: clear tt 1 (0070) error -71 [ 2614.522081] hid-generic 0003:3938:1032.0001: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 2614.526070] usb 2-1.4: clear tt 1 (0070) error -71 [ 2614.530079] hid-generic 0003:3938:1032.0002: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 2614.534070] usb 2-1.4: clear tt 1 (0070) error -71 [ 2614.538092] hid-generic 0003:3938:1032.0001: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 2614.542088] usb 2-1.4: clear tt 1 (0070) error -71 [ 2614.546094] hid-generic 0003:3938:1032.0002: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 2614.550087] usb 2-1.4: clear tt 1 (0070) error -71 [ 2614.554099] hid-generic 0003:3938:1032.0001: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 2614.558094] usb 2-1.4: clear tt 1 (0070) error -71 [ 2614.562105] hid-generic 0003:3938:1032.0002: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 2614.566099] usb 2-1.4: clear tt 1 (0070) error -71 [ 2614.570111] hid-generic 0003:3938:1032.0001: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 2614.570145] usb 2-1.4: USB disconnect, device number 6 [ 2614.570154] usb 2-1.4.1: USB disconnect, device number 7 [ 2614.574102] usb 2-1.4: clear tt 1 (0070) error -71 [ 2614.580076] hid-generic 0003:3938:1032.0002: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 2614.637488] usb 2-1.4.4: USB disconnect, device number 8 [ 2614.637597] usblp1: removed [ 2614.837709] usb 2-1.4: new high-speed USB device number 9 using ehci-pci [ 2614.930255] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101 [ 2614.930259] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2614.930260] usb 2-1.4: Product: USB 2.0 Hub [ 2614.930409] hub 2-1.4:1.0: USB hub found [ 2614.930504] hub 2-1.4:1.0: 4 ports detected [ 2615.202000] usb 2-1.4.1: new full-speed USB device number 10 using ehci-pci [ 2615.296459] usb 2-1.4.1: New USB device found, idVendor=3938, idProduct=1032 [ 2615.296462] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2615.296464] usb 2-1.4.1: Product: 2.4G RF Keyboard & Mouse [ 2615.296465] usb 2-1.4.1: Manufacturer: MOSART Semi. [ 2615.297609] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input24 [ 2615.297695] hid-generic 0003:3938:1032.0003: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-0000:00:1d.0-1.4.1/input0 [ 2615.299534] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.1/input/input25 [ 2615.299663] hid-generic 0003:3938:1032.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-0000:00:1d.0-1.4.1/input1 [ 2615.374124] usb 2-1.4.4: new high-speed USB device number 11 using ehci-pci [ 2615.467186] usb 2-1.4.4: New USB device found, idVendor=03f0, idProduct=e211 [ 2615.467196] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2615.467201] usb 2-1.4.4: Product: DeskJet 4720 series [ 2615.467205] usb 2-1.4.4: Manufacturer: HP [ 2615.467209] usb 2-1.4.4: SerialNumber: CN73A4H3D3069D [ 2615.468479] usblp 2-1.4.4:1.1: usblp1: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE211 [ 2621.015391] usblp1: removed [ 2621.016425] usblp 2-1.4.4:1.1: usblp1: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE211 [ 3043.307921] systemd-hostnamed[3855]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 3345.213829] systemd-hostnamed[3903]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 4566.189228] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.193316] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.197355] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.201352] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.205358] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.209355] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.213363] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.217361] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.221370] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.225367] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.229372] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.233372] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.237380] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.241385] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.245386] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.249387] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.253392] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.257392] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.261400] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.265399] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.269406] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.273405] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.277409] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.281413] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.285417] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.289418] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.293421] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.297424] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.301432] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.305429] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.309435] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.313436] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.317443] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.321442] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.325447] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.329449] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.333456] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.337455] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.341464] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.345463] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.349472] hid-generic 0003:3938:1032.0004: can't reset device, 0000:00:1d.0-1.4.1/input1, status -71 [ 4566.353469] usb 2-1.4: clear tt 1 (00a0) error -71 [ 4566.354468] usb 2-1.4: USB disconnect, device number 9 [ 4566.354470] usb 2-1.4.1: USB disconnect, device number 10 [ 4566.357473] hid-generic 0003:3938:1032.0003: can't reset device, 0000:00:1d.0-1.4.1/input0, status -71 [ 4566.432122] usb 2-1.4.4: USB disconnect, device number 11 [ 4566.432298] usblp1: removed [ 4566.636354] usb 2-1.4: new high-speed USB device number 12 using ehci-pci [ 4566.728956] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101 [ 4566.728965] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4566.728971] usb 2-1.4: Product: USB 2.0 Hub [ 4566.729406] hub 2-1.4:1.0: USB hub found [ 4566.729537] hub 2-1.4:1.0: 4 ports detected [ 4567.000641] usb 2-1.4.1: new full-speed USB device number 13 using ehci-pci [ 4567.095175] usb 2-1.4.1: New USB device found, idVendor=3938, idProduct=1032 [ 4567.095184] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4567.095189] usb 2-1.4.1: Product: 2.4G RF Keyboard & Mouse [ 4567.095193] usb 2-1.4.1: Manufacturer: MOSART Semi. [ 4567.097082] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input26 [ 4567.097342] hid-generic 0003:3938:1032.0005: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-0000:00:1d.0-1.4.1/input0 [ 4567.100047] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.1/input/input27 [ 4567.100800] hid-generic 0003:3938:1032.0006: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-0000:00:1d.0-1.4.1/input1 [ 4567.172815] usb 2-1.4.4: new high-speed USB device number 14 using ehci-pci [ 4567.265594] usb 2-1.4.4: New USB device found, idVendor=03f0, idProduct=e211 [ 4567.265603] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4567.265608] usb 2-1.4.4: Product: DeskJet 4720 series [ 4567.265612] usb 2-1.4.4: Manufacturer: HP [ 4567.265615] usb 2-1.4.4: SerialNumber: CN73A4H3D3069D [ 4567.266417] usblp 2-1.4.4:1.1: usblp1: USB Bidirectional printer dev 14 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE211 [ 4570.471138] usblp1: removed [ 4570.472147] usblp 2-1.4.4:1.1: usblp1: USB Bidirectional printer dev 14 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE211 [ 5449.277423] systemd-hostnamed[4700]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 5718.613878] usblp1: removed [ 5742.894562] usblp 2-1.4.4:1.1: usblp1: USB Bidirectional printer dev 14 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE211 [ 5762.139149] usblp1: removed [ 5788.924179] usblp 2-1.4.4:1.1: usblp1: USB Bidirectional printer dev 14 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE211 [ 5792.541540] usblp1: removed [ 5812.819264] usblp 2-1.4.4:1.1: usblp1: USB Bidirectional printer dev 14 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE211 [ 5872.215305] systemd-hostnamed[4986]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 5986.311683] type=1400 audit(1501347869.100:39): apparmor="DENIED" operation="file_lock" profile="/usr/share/hplip/toolbox.py" name="/etc/xdg/Trolltech.conf" pid=5013 comm="python" requested_mask="k" denied_mask="k" fsuid=1000 ouid=0 [ 5994.552935] usblp1: removed [ 6220.151672] systemd-hostnamed[5174]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 6608.358994] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready