[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6c0000 (usable) [ 0.000000] BIOS-e820: 000000007f6c0000 - 000000007f6df000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6df000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7f6c0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-D3FFF uncachable [ 0.000000] D4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007f6c0000 (usable) [ 0.000000] modified: 000000007f6c0000 - 000000007f6df000 (ACPI NVS) [ 0.000000] modified: 000000007f6df000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37857000 - 37fef340 [ 0.000000] Allocated new RAMDISK: 008de000 - 01076340 [ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fef33f to 008de000 - 0107633f [ 0.000000] ACPI: RSDP 000f7e20 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 7f6d0415 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7f6dbc3a 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 7f6d12c7 0A8FF (v02 INTEL CRESTLNE 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 7f6defc0 00040 [ 0.000000] ACPI: HPET 7f6dbd2e 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 7f6dbd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 7f6dbda2 00032 (v01 Intel CRESTLN 06040000 00005A52) [ 0.000000] ACPI: TMOR 7f6dbdd4 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: SLIC 7f6dbdfa 00176 (v01 HPQOEM SLIC-MPC 06040000 HPQ 00000001) [ 0.000000] ACPI: APIC 7f6dbf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7f6dbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 7f6d0fea 002DD (v01 SataRe SataAhci 00001000 INTL 20060912) [ 0.000000] ACPI: SSDT 7f6d0e4d 0019D (v01 BrtRef DD01BRT 00001000 INTL 20060912) [ 0.000000] ACPI: SSDT 7f6d0491 004E6 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd138] BRK ==> [00008da000 - 00008dd138] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008de000 - 0001076340] NEW RAMDISK ==> [00008de000 - 0001076340] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f7e50] f7e50 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007f6c0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f6c0 [ 0.000000] On node 0 totalpages: 521819 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1078000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292292 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u2097152 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517741 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=f31a8f53-d1f4-410f-9094-f7aa5eae2278 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10438400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6c0) [ 0.000000] Memory: 2042980k/2087680k available (4673k kernel code, 43332k reserved, 2122k data, 656k init, 1178376k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2194.260 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.52 BogoMIPS (lpj=8777040) [ 0.004020] Security Framework initialized [ 0.004039] AppArmor: AppArmor initialized [ 0.004045] Mount-cache hash table entries: 512 [ 0.004158] Initializing cgroup subsys ns [ 0.004162] Initializing cgroup subsys cpuacct [ 0.004166] Initializing cgroup subsys memory [ 0.004172] Initializing cgroup subsys devices [ 0.004174] Initializing cgroup subsys freezer [ 0.004176] Initializing cgroup subsys net_cls [ 0.004194] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004197] CPU: L2 cache: 4096K [ 0.004199] CPU: Physical Processor ID: 0 [ 0.004201] CPU: Processor Core ID: 0 [ 0.004204] mce: CPU supports 6 MCE banks [ 0.004211] CPU0: Thermal monitoring handled by SMI [ 0.004215] using mwait in idle threads. [ 0.004221] Performance Events: Core2 events, Intel PMU driver. [ 0.004228] ... version: 2 [ 0.004230] ... bit width: 40 [ 0.004231] ... generic registers: 2 [ 0.004233] ... value mask: 000000ffffffffff [ 0.004235] ... max period: 000000007fffffff [ 0.004236] ... fixed-purpose events: 3 [ 0.004238] ... event mask: 0000000700000003 [ 0.004241] Checking 'hlt' instruction... OK. [ 0.022355] ACPI: Core revision 20090903 [ 0.036009] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036015] ftrace: allocating 21771 entries in 43 pages [ 0.040049] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081765] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 4096K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.168104] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.168115] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172018] Brought up 2 CPUs [ 0.172021] Total of 2 processors activated (8777.48 BogoMIPS). [ 0.172635] CPU0 attaching sched-domain: [ 0.172638] domain 0: span 0-1 level MC [ 0.172640] groups: 0 1 [ 0.172646] CPU1 attaching sched-domain: [ 0.172648] domain 0: span 0-1 level MC [ 0.172650] groups: 1 0 [ 0.172743] devtmpfs: initialized [ 0.172743] regulator: core version 0.5 [ 0.172743] Time: 16:49:25 Date: 12/23/10 [ 0.172743] NET: Registered protocol family 16 [ 0.172743] Trying to unpack rootfs image as initramfs... [ 0.172743] EISA bus registered [ 0.172743] ACPI: bus type pci registered [ 0.172743] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.172743] PCI: MCFG area at e0000000 reserved in E820 [ 0.172743] PCI: Using MMCONFIG for extended config space [ 0.172743] PCI: Using configuration type 1 for base access [ 0.176091] bio: create slab at 0 [ 0.177073] ACPI: EC: Look up EC in DSDT [ 0.180056] ACPI: BIOS _OSI(Linux) query ignored [ 0.188426] ACPI: Interpreter enabled [ 0.188426] ACPI: (supports S0 S3 S4 S5) [ 0.188426] ACPI: Using IOAPIC for interrupt routing [ 0.200985] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.201303] ACPI: No dock devices found. [ 0.204713] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.204804] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf40fffff] [ 0.204812] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.204817] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.204859] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4100000-0xf41fffff] [ 0.204976] pci 0000:00:1a.0: reg 20 io port: [0x1840-0x185f] [ 0.205039] pci 0000:00:1a.1: reg 20 io port: [0x1860-0x187f] [ 0.205115] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4705c00-0xf4705fff] [ 0.205186] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.205191] pci 0000:00:1a.7: PME# disabled [ 0.205250] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4500000-0xf4503fff] [ 0.205316] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.205320] pci 0000:00:1b.0: PME# disabled [ 0.205421] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.205426] pci 0000:00:1c.0: PME# disabled [ 0.205527] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.205531] pci 0000:00:1c.1: PME# disabled [ 0.205631] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.205636] pci 0000:00:1c.2: PME# disabled [ 0.205740] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.205744] pci 0000:00:1c.3: PME# disabled [ 0.205817] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] [ 0.205889] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] [ 0.205956] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] [ 0.206023] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4706000-0xf47063ff] [ 0.206084] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.206089] pci 0000:00:1d.7: PME# disabled [ 0.206262] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.206267] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.206273] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1200 (mask 0007) [ 0.206330] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.206338] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.206346] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.206355] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.206363] pci 0000:00:1f.1: reg 20 io port: [0x1830-0x183f] [ 0.206439] pci 0000:00:1f.2: reg 10 io port: [0x18f8-0x18ff] [ 0.206447] pci 0000:00:1f.2: reg 14 io port: [0x18ec-0x18ef] [ 0.206455] pci 0000:00:1f.2: reg 18 io port: [0x18f0-0x18f7] [ 0.206464] pci 0000:00:1f.2: reg 1c io port: [0x18e8-0x18eb] [ 0.206473] pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f] [ 0.206481] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4705000-0xf47057ff] [ 0.206527] pci 0000:00:1f.2: PME# supported from D3hot [ 0.206531] pci 0000:00:1f.2: PME# disabled [ 0.206566] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.206593] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] [ 0.206684] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.206689] pci 0000:00:1c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff] [ 0.206698] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.206772] pci 0000:05:00.0: reg 10 64bit mmio: [0xf4200000-0xf4203fff] [ 0.206782] pci 0000:05:00.0: reg 18 io port: [0x3000-0x30ff] [ 0.206876] pci 0000:05:00.0: supports D1 D2 [ 0.206878] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.206884] pci 0000:05:00.0: PME# disabled [ 0.206953] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.206958] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff] [ 0.207178] pci 0000:07:00.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff] [ 0.207420] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.207433] pci 0000:07:00.0: PME# disabled [ 0.207546] pci 0000:00:1c.3: bridge 32bit mmio: [0xf4300000-0xf43fffff] [ 0.207611] pci 0000:08:09.0: reg 10 32bit mmio: [0xf4400000-0xf44007ff] [ 0.207673] pci 0000:08:09.0: supports D1 D2 [ 0.207675] pci 0000:08:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.207680] pci 0000:08:09.0: PME# disabled [ 0.207724] pci 0000:08:09.1: reg 10 32bit mmio: [0xf4400800-0xf44008ff] [ 0.207787] pci 0000:08:09.1: supports D1 D2 [ 0.207789] pci 0000:08:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.207794] pci 0000:08:09.1: PME# disabled [ 0.207838] pci 0000:08:09.2: reg 10 32bit mmio: [0xf4400c00-0xf4400cff] [ 0.207901] pci 0000:08:09.2: supports D1 D2 [ 0.207903] pci 0000:08:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.207908] pci 0000:08:09.2: PME# disabled [ 0.207951] pci 0000:08:09.3: reg 10 32bit mmio: [0xf4401000-0xf44010ff] [ 0.208023] pci 0000:08:09.3: supports D1 D2 [ 0.208025] pci 0000:08:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208030] pci 0000:08:09.3: PME# disabled [ 0.208084] pci 0000:00:1e.0: transparent bridge [ 0.208092] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4400000-0xf44fffff] [ 0.208132] pci_bus 0000:00: on NUMA node 0 [ 0.208137] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.208386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.208463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.208537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.208610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.208707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.213946] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.214050] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.214148] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.214245] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.214345] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.214442] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.214538] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.214636] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.214740] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.214756] vgaarb: loaded [ 0.214867] SCSI subsystem initialized [ 0.214949] libata version 3.00 loaded. [ 0.215017] usbcore: registered new interface driver usbfs [ 0.215029] usbcore: registered new interface driver hub [ 0.215057] usbcore: registered new device driver usb [ 0.215214] ACPI: WMI: Mapper loaded [ 0.215216] PCI: Using ACPI for IRQ routing [ 0.215414] NetLabel: Initializing [ 0.215416] NetLabel: domain hash size = 128 [ 0.215417] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.215430] NetLabel: unlabeled traffic allowed by default [ 0.215462] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.215467] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.220128] Switching to clocksource tsc [ 0.221951] AppArmor: AppArmor Filesystem Enabled [ 0.221963] pnp: PnP ACPI init [ 0.221976] ACPI: bus type pnp registered [ 0.224833] pnp: PnP ACPI: found 10 devices [ 0.224835] ACPI: ACPI bus type pnp unregistered [ 0.224838] PnPBIOS: Disabled by ACPI PNP [ 0.224849] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.224852] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.224855] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.224857] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.224860] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.224863] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.224866] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.224873] system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.224879] system 00:08: ioport range 0x680-0x69f has been reserved [ 0.224882] system 00:08: ioport range 0x800-0x80f has been reserved [ 0.224885] system 00:08: ioport range 0x1000-0x107f has been reserved [ 0.224888] system 00:08: ioport range 0x1180-0x11bf has been reserved [ 0.224890] system 00:08: ioport range 0xfe00-0xfe00 has been reserved [ 0.259648] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.259653] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.259659] pci 0000:00:1c.0: MEM window: 0xf2000000-0xf3ffffff [ 0.259665] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.259673] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05 [ 0.259677] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.259683] pci 0000:00:1c.1: MEM window: 0xf4200000-0xf42fffff [ 0.259687] pci 0000:00:1c.1: PREFETCH window: 0x00000080000000-0x000000801fffff [ 0.259696] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 [ 0.259699] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.259706] pci 0000:00:1c.2: MEM window: 0x80200000-0x803fffff [ 0.259711] pci 0000:00:1c.2: PREFETCH window: 0x00000080400000-0x000000805fffff [ 0.259719] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07 [ 0.259722] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 0.259729] pci 0000:00:1c.3: MEM window: 0xf4300000-0xf43fffff [ 0.259734] pci 0000:00:1c.3: PREFETCH window: 0x00000080600000-0x000000807fffff [ 0.259742] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.259744] pci 0000:00:1e.0: IO window: disabled [ 0.259751] pci 0000:00:1e.0: MEM window: 0xf4400000-0xf44fffff [ 0.259756] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.259778] alloc irq_desc for 17 on node -1 [ 0.259780] alloc kstat_irqs on node -1 [ 0.259787] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.259794] pci 0000:00:1c.0: setting latency timer to 64 [ 0.259805] alloc irq_desc for 16 on node -1 [ 0.259807] alloc kstat_irqs on node -1 [ 0.259810] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.259815] pci 0000:00:1c.1: setting latency timer to 64 [ 0.259824] alloc irq_desc for 18 on node -1 [ 0.259826] alloc kstat_irqs on node -1 [ 0.259830] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.259834] pci 0000:00:1c.2: setting latency timer to 64 [ 0.259844] alloc irq_desc for 19 on node -1 [ 0.259845] alloc kstat_irqs on node -1 [ 0.259849] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.259854] pci 0000:00:1c.3: setting latency timer to 64 [ 0.259862] pci 0000:00:1e.0: setting latency timer to 64 [ 0.259866] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.259869] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.259872] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.259874] pci_bus 0000:02: resource 1 mem: [0xf2000000-0xf3ffffff] [ 0.259877] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff] [ 0.259879] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff] [ 0.259881] pci_bus 0000:05: resource 1 mem: [0xf4200000-0xf42fffff] [ 0.259884] pci_bus 0000:05: resource 2 pref mem [0x80000000-0x801fffff] [ 0.259886] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff] [ 0.259889] pci_bus 0000:06: resource 1 mem: [0x80200000-0x803fffff] [ 0.259891] pci_bus 0000:06: resource 2 pref mem [0x80400000-0x805fffff] [ 0.259894] pci_bus 0000:07: resource 0 io: [0x5000-0x5fff] [ 0.259896] pci_bus 0000:07: resource 1 mem: [0xf4300000-0xf43fffff] [ 0.259898] pci_bus 0000:07: resource 2 pref mem [0x80600000-0x807fffff] [ 0.259901] pci_bus 0000:08: resource 1 mem: [0xf4400000-0xf44fffff] [ 0.259903] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 0.259905] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] [ 0.259942] NET: Registered protocol family 2 [ 0.260038] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.260360] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.260856] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.261093] TCP: Hash tables configured (established 131072 bind 65536) [ 0.261096] TCP reno registered [ 0.261176] NET: Registered protocol family 1 [ 0.261197] pci 0000:00:02.0: Boot video device [ 0.261359] Simple Boot Flag at 0x36 set to 0x1 [ 0.261524] cpufreq-nforce2: No nForce2 chipset. [ 0.261549] Scanning for low memory corruption every 60 seconds [ 0.261658] audit: initializing netlink socket (disabled) [ 0.261668] type=2000 audit(1293122965.259:1): initialized [ 0.270832] highmem bounce pool size: 64 pages [ 0.270837] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.272259] VFS: Disk quotas dquot_6.5.2 [ 0.272319] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.272837] fuse init (API version 7.13) [ 0.272915] msgmni has been set to 1690 [ 0.273110] alg: No test for stdrng (krng) [ 0.273160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.273163] io scheduler noop registered [ 0.273165] io scheduler anticipatory registered [ 0.273167] io scheduler deadline registered [ 0.273202] io scheduler cfq registered (default) [ 0.273379] alloc irq_desc for 24 on node -1 [ 0.273381] alloc kstat_irqs on node -1 [ 0.273393] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.273405] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.273566] alloc irq_desc for 25 on node -1 [ 0.273567] alloc kstat_irqs on node -1 [ 0.273576] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.273588] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.273742] alloc irq_desc for 26 on node -1 [ 0.273744] alloc kstat_irqs on node -1 [ 0.273753] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.273764] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.273922] alloc irq_desc for 27 on node -1 [ 0.273924] alloc kstat_irqs on node -1 [ 0.273933] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.273944] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.274048] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.274442] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 283f ss_vid 0 ss_did 0 [ 0.274490] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 0.274513] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2841 ss_vid 0 ss_did 0 [ 0.274553] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 0.274574] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2843 ss_vid 0 ss_did 0 [ 0.274611] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded [ 0.274633] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 0 ss_did 0 [ 0.274670] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.274678] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.275227] ACPI: AC Adapter [ADP1] (on-line) [ 0.275287] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.275829] ACPI: Lid Switch [LID0] [ 0.275871] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.275877] ACPI: Sleep Button [SLPB] [ 0.275931] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.275933] ACPI: Power Button [PWRF] [ 0.276576] ACPI: SSDT 7f6d0b0b 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.276939] ACPI: SSDT 7f6d0977 0010F (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.277461] Marking TSC unstable due to TSC halts in idle [ 0.277535] processor LNXCPU:00: registered as cooling_device0 [ 0.277868] ACPI: SSDT 7f6d0d85 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20060912) [ 0.278200] ACPI: SSDT 7f6d0a86 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060912) [ 0.278770] processor LNXCPU:01: registered as cooling_device1 [ 0.280170] Switching to clocksource hpet [ 0.286808] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.332140] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.332151] ACPI: Thermal Zone [TZS0] (65 C) [ 0.358742] Freeing initrd memory: 7776k freed [ 0.480097] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.480107] ACPI: Thermal Zone [TZS1] (67 C) [ 0.480283] isapnp: Scanning for PnP cards... [ 0.568140] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.569415] brd: module loaded [ 0.569846] loop: module loaded [ 0.569922] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.570020] ata_piix 0000:00:1f.1: version 2.13 [ 0.570036] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.570083] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.570168] scsi0 : ata_piix [ 0.570234] scsi1 : ata_piix [ 0.570790] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14 [ 0.570793] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15 [ 0.571099] Fixed MDIO Bus: probed [ 0.571129] PPP generic driver version 2.4.2 [ 0.571162] tun: Universal TUN/TAP device driver, 1.6 [ 0.571164] tun: (C) 1999-2004 Max Krasnyansky [ 0.571236] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.571254] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.571268] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.571272] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.571304] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.571335] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.575223] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.575237] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4705c00 [ 0.592015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.592094] usb usb1: configuration #1 chosen from 1 choice [ 0.592120] hub 1-0:1.0: USB hub found [ 0.592128] hub 1-0:1.0: 4 ports detected [ 0.592181] alloc irq_desc for 23 on node -1 [ 0.592183] alloc kstat_irqs on node -1 [ 0.592189] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.592198] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.592202] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.592230] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.592258] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.596132] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.596146] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4706000 [ 0.612018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.612082] usb usb2: configuration #1 chosen from 1 choice [ 0.612105] hub 2-0:1.0: USB hub found [ 0.612112] hub 2-0:1.0: 6 ports detected [ 0.612166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.612180] uhci_hcd: USB Universal Host Controller Interface driver [ 0.612202] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.612208] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.612211] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.612238] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.612274] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 [ 0.612357] usb usb3: configuration #1 chosen from 1 choice [ 0.612381] hub 3-0:1.0: USB hub found [ 0.612387] hub 3-0:1.0: 2 ports detected [ 0.612435] alloc irq_desc for 21 on node -1 [ 0.612437] alloc kstat_irqs on node -1 [ 0.612441] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.612447] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.612451] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.612477] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.612513] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860 [ 0.612597] usb usb4: configuration #1 chosen from 1 choice [ 0.612620] hub 4-0:1.0: USB hub found [ 0.612630] hub 4-0:1.0: 2 ports detected [ 0.612677] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.612683] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.612687] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.612713] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.612741] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.612820] usb usb5: configuration #1 chosen from 1 choice [ 0.612842] hub 5-0:1.0: USB hub found [ 0.612849] hub 5-0:1.0: 2 ports detected [ 0.612892] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.612900] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.612903] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.612931] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.612967] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 0.613049] usb usb6: configuration #1 chosen from 1 choice [ 0.613074] hub 6-0:1.0: USB hub found [ 0.613081] hub 6-0:1.0: 2 ports detected [ 0.613122] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.613128] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.613132] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.613158] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.613186] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.613265] usb usb7: configuration #1 chosen from 1 choice [ 0.613290] hub 7-0:1.0: USB hub found [ 0.613296] hub 7-0:1.0: 2 ports detected [ 0.613384] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.613716] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.613798] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.613804] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.613828] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.613850] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.613870] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.613968] mice: PS/2 mouse device common for all mice [ 0.614106] rtc_cmos 00:09: RTC can wake from S4 [ 0.614138] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 [ 0.614170] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.614255] device-mapper: uevent: version 1.0.3 [ 0.614336] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.614398] device-mapper: multipath: version 1.1.0 loaded [ 0.614400] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.614508] EISA: Probing bus 0 at eisa.0 [ 0.614514] Cannot allocate resource for EISA slot 1 [ 0.614517] Cannot allocate resource for EISA slot 2 [ 0.614519] Cannot allocate resource for EISA slot 3 [ 0.614521] Cannot allocate resource for EISA slot 4 [ 0.614522] Cannot allocate resource for EISA slot 5 [ 0.614537] EISA: Detected 0 cards. [ 0.614677] cpuidle: using governor ladder [ 0.614789] cpuidle: using governor menu [ 0.615187] TCP cubic registered [ 0.615325] NET: Registered protocol family 10 [ 0.615747] lo: Disabled Privacy Extensions [ 0.616067] NET: Registered protocol family 17 [ 0.616633] Using IPI No-Shortcut mode [ 0.616695] PM: Resume from disk failed. [ 0.616708] registered taskstats version 1 [ 0.617285] Magic number: 6:251:844 [ 0.617358] rtc_cmos 00:09: setting system clock to 2010-12-23 16:49:26 UTC (1293122966) [ 0.617360] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.617362] EDD information not available. [ 0.619313] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.768387] ata1.00: ATAPI: Slimtype DVD A DS8A1P, CH71, max MWDMA2 [ 0.800294] ata1.00: configured for MWDMA2 [ 0.834628] isapnp: No Plug & Play device found [ 0.836991] scsi 0:0:0:0: CD-ROM Slimtype DVD A DS8A1P CH71 PQ: 0 ANSI: 5 [ 0.847817] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.847822] Uniform CD-ROM driver Revision: 3.20 [ 0.847956] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.848035] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.848148] Freeing unused kernel memory: 656k freed [ 0.848576] Write protecting the kernel text: 4676k [ 0.848633] Write protecting the kernel read-only data: 1840k [ 0.863983] udev: starting version 151 [ 0.892566] sky2 driver version 1.25 [ 0.892609] sky2 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.892625] sky2 0000:05:00.0: setting latency timer to 64 [ 0.892652] sky2 0000:05:00.0: Yukon-2 FE chip revision 3 [ 0.892761] alloc irq_desc for 28 on node -1 [ 0.892763] alloc kstat_irqs on node -1 [ 0.892780] sky2 0000:05:00.0: irq 28 for MSI/MSI-X [ 0.916822] sky2 eth0: addr 00:16:d3:f7:da:a9 [ 0.982803] ahci 0000:00:1f.2: version 3.0 [ 0.982823] alloc irq_desc for 20 on node -1 [ 0.982825] alloc kstat_irqs on node -1 [ 0.982832] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.982876] alloc irq_desc for 29 on node -1 [ 0.982878] alloc kstat_irqs on node -1 [ 0.982888] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 0.982965] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 0.982968] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 0.982974] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.983197] scsi2 : ahci [ 0.983262] scsi3 : ahci [ 0.983316] scsi4 : ahci [ 0.983441] ata3: SATA max UDMA/133 abar m2048@0xf4705000 port 0xf4705100 irq 29 [ 0.983444] ata4: SATA max UDMA/133 abar m2048@0xf4705000 port 0xf4705180 irq 29 [ 0.983448] ata5: SATA max UDMA/133 abar m2048@0xf4705000 port 0xf4705200 irq 29 [ 0.985344] ohci1394 0000:08:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.042325] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f4400000-f44007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.300081] ata5: SATA link down (SStatus 0 SControl 300) [ 1.300108] ata4: SATA link down (SStatus 0 SControl 300) [ 1.300136] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.336060] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 1.492929] usb 5-1: configuration #1 chosen from 1 choice [ 1.503368] Initializing USB Mass Storage driver... [ 1.504866] scsi7 : SCSI emulation for USB Mass Storage devices [ 1.504998] usbcore: registered new interface driver usb-storage [ 1.505001] USB Mass Storage support registered. [ 1.505005] usb-storage: device found at 2 [ 1.505007] usb-storage: waiting for device to settle before scanning [ 1.660137] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) [ 1.660151] ata3.00: _GTF unexpected object type 0x1 [ 1.660159] ata3.00: ATA-7: ST9160821AS, 3.BHE, max UDMA/100 [ 1.660164] ata3.00: 312581808 sectors, multi 16: LBA48 [ 1.724249] ata3.00: _GTF unexpected object type 0x1 [ 1.724270] ata3.00: configured for UDMA/100 [ 1.736051] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 1.740249] scsi 2:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5 [ 1.740388] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.740442] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.740485] sd 2:0:0:0: [sda] Write Protect is off [ 1.740487] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.740509] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.740626] sda: sda1 sda2 [ 1.796396] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.888291] ACPI: Battery Slot [BAT0] (battery present) [ 1.912143] usb 6-1: configuration #1 chosen from 1 choice [ 1.924201] usbcore: registered new interface driver hiddev [ 1.937312] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input5 [ 1.937388] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-1/input0 [ 1.937411] usbcore: registered new interface driver usbhid [ 1.937413] usbhid: v2.6:USB HID core driver [ 2.143825] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.156041] usb 7-2: new full speed USB device using uhci_hcd and address 2 [ 2.326381] usb 7-2: configuration #1 chosen from 1 choice [ 2.328231] ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a0093595042] [ 6.505928] usb-storage: device scan complete [ 6.508891] scsi 7:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 6.524857] sr1: scsi-1 drive [ 6.525024] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 6.525089] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 11.785555] udev: starting version 151 [ 11.796931] lp: driver loaded but no devices found [ 11.813312] Adding 2690876k swap on /dev/sda2. Priority:-1 extents:1 across:2690876k [ 12.165721] Linux agpgart interface v0.103 [ 12.168173] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 12.169179] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 12.184304] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 12.237275] sdhci: Secure Digital Host Controller Interface driver [ 12.237277] sdhci: Copyright(c) Pierre Ossman [ 12.237932] cfg80211: Calling CRDA to update world regulatory domain [ 12.251114] [drm] Initialized drm 1.1.0 20060810 [ 12.258083] Bluetooth: Core ver 2.15 [ 12.263190] NET: Registered protocol family 31 [ 12.263193] Bluetooth: HCI device and connection manager initialized [ 12.263195] Bluetooth: HCI socket layer initialized [ 12.264743] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 12.264845] usbcore: registered new interface driver btusb [ 12.276209] sdhci-pci 0000:08:09.1: SDHCI controller found [1180:0822] (rev 22) [ 12.276229] sdhci-pci 0000:08:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 12.277280] Registered led device: mmc0:: [ 12.278312] mmc0: SDHCI controller on PCI [0000:08:09.1] using PIO [ 12.291721] cfg80211: World regulatory domain updated: [ 12.291724] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.291727] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.291730] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.291732] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.291734] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.291737] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.304112] type=1505 audit(1293122978.183:2): operation="profile_load" pid=682 name="/sbin/dhclient3" [ 12.304847] type=1505 audit(1293122978.183:3): operation="profile_load" pid=682 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.305183] type=1505 audit(1293122978.187:4): operation="profile_load" pid=682 name="/usr/lib/connman/scripts/dhclient-script" [ 12.330641] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.330647] i915 0000:00:02.0: setting latency timer to 64 [ 12.335827] alloc irq_desc for 30 on node -1 [ 12.335830] alloc kstat_irqs on node -1 [ 12.335838] i915 0000:00:02.0: irq 30 for MSI/MSI-X [ 12.335845] [drm] set up 7M of stolen space [ 12.351855] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 12.351858] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 12.351927] iwl3945 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 12.351942] iwl3945 0000:07:00.0: setting latency timer to 64 [ 12.477597] [drm] initialized overlay support [ 12.496692] type=1505 audit(1293122978.375:5): operation="profile_load" pid=759 name="/usr/share/gdm/guest-session/Xsession" [ 12.498204] type=1505 audit(1293122978.379:6): operation="profile_replace" pid=760 name="/sbin/dhclient3" [ 12.498838] type=1505 audit(1293122978.379:7): operation="profile_replace" pid=760 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.499179] type=1505 audit(1293122978.379:8): operation="profile_replace" pid=760 name="/usr/lib/connman/scripts/dhclient-script" [ 12.502056] type=1505 audit(1293122978.383:9): operation="profile_load" pid=761 name="/usr/bin/evince" [ 12.508042] iwl3945 0000:07:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 12.508045] iwl3945 0000:07:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 12.508227] alloc irq_desc for 31 on node -1 [ 12.508229] alloc kstat_irqs on node -1 [ 12.509017] iwl3945 0000:07:00.0: irq 31 for MSI/MSI-X [ 12.519088] type=1505 audit(1293122978.399:10): operation="profile_load" pid=761 name="/usr/bin/evince-previewer" [ 12.533169] type=1505 audit(1293122978.415:11): operation="profile_load" pid=761 name="/usr/bin/evince-thumbnailer" [ 12.559350] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 12.647097] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6 [ 12.662347] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7 [ 12.908552] usbcore: registered new interface driver usbserial [ 12.908980] USB Serial support registered for generic [ 12.909463] usbcore: registered new interface driver usbserial_generic [ 12.909465] usbserial: USB Serial Driver core [ 12.946961] USB Serial support registered for GSM modem (1-port) [ 12.947033] option 5-1:1.0: GSM modem (1-port) converter detected [ 12.947142] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 12.947153] option 5-1:1.1: GSM modem (1-port) converter detected [ 12.947199] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 12.947229] usbcore: registered new interface driver option [ 12.947231] option: v0.7.2:USB Driver for GSM modems [ 12.948168] Bluetooth: L2CAP ver 2.14 [ 12.948170] Bluetooth: L2CAP socket layer initialized [ 12.955565] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.955568] Bluetooth: BNEP filters: protocol multicast [ 12.963191] Bridge firewalling registered [ 12.968798] Bluetooth: SCO (Voice Link) ver 0.6 [ 12.968800] Bluetooth: SCO socket layer initialized [ 13.077812] Bluetooth: RFCOMM TTY layer initialized [ 13.077816] Bluetooth: RFCOMM socket layer initialized [ 13.077817] Bluetooth: RFCOMM ver 1.11 [ 13.138822] sky2 eth0: enabling interface [ 13.139012] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.140628] iwl3945 0000:07:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 13.157037] fb0: inteldrmfb frame buffer device [ 13.157040] registered panic notifier [ 13.170442] iwl3945 0000:07:00.0: loaded firmware version 15.32.2.9 [ 13.210269] ppdev: user-space parallel port driver [ 13.236994] Registered led device: iwl-phy0::radio [ 13.237185] Registered led device: iwl-phy0::assoc [ 13.237315] Registered led device: iwl-phy0::RX [ 13.237909] Registered led device: iwl-phy0::TX [ 13.249215] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 13.324251] acpi device:08: registered as cooling_device2 [ 13.324512] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8 [ 13.324563] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.324599] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 13.325445] alloc irq_desc for 22 on node -1 [ 13.325448] alloc kstat_irqs on node -1 [ 13.325455] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.325491] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.326209] vga16fb: initializing [ 13.326212] vga16fb: mapped to 0xc00a0000 [ 13.326215] vga16fb: not registering due to another framebuffer present [ 13.455534] Console: switching to colour frame buffer device 160x50 [ 32.671864] Registered led device: iwl-phy0::radio [ 32.671884] Registered led device: iwl-phy0::assoc [ 32.671914] Registered led device: iwl-phy0::RX [ 32.671935] Registered led device: iwl-phy0::TX [ 33.755073] ip_tables: (C) 2000-2006 Netfilter Core Team [ 33.796245] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 33.799577] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 33.799581] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 33.799582] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 33.850808] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 33.950798] ISOFS: changing to secondary root [ 34.860752] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [ 34.860756] atkbd.c: Use 'setkeycodes e059 ' to make it known. [ 34.861404] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [ 34.861406] atkbd.c: Use 'setkeycodes e059 ' to make it known. [ 35.083648] PPP BSD Compression module registered [ 35.125070] PPP Deflate Compression module registered [ 40.816291] wlan0: Creating new IBSS network, BSSID 5e:05:d9:e3:14:e3 [ 43.340017] wlan0: no IPv6 routers present [ 108.903767] CE: hpet increasing min_delta_ns to 15000 nsec [ 224.348135] usb 2-4: new high speed USB device using ehci_hcd and address 5 [ 224.486416] usb 2-4: configuration #1 chosen from 4 choices [ 225.836269] ipheth: ipheth_get_macaddr: usb_control_msg: -110 [ 225.836300] ipheth: probe of 2-4:4.2 failed with error -110 [ 225.836368] usbcore: registered new interface driver ipheth [ 238.682927] CE: hpet increasing min_delta_ns to 22500 nsec [ 275.254313] usb 2-4: USB disconnect, address 5 [ 340.988141] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 370.989182] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 400.988326] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 430.988229] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 460.988299] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 490.989072] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 520.989281] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 550.988239] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 580.989261] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 610.989299] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 640.988279] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 670.988206] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 700.988298] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 730.988278] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 751.272281] usb 2-4: new high speed USB device using ehci_hcd and address 6 [ 751.406701] usb 2-4: configuration #1 chosen from 1 choice [ 751.407113] scsi8 : SCSI emulation for USB Mass Storage devices [ 751.407444] usb-storage: device found at 6 [ 751.407448] usb-storage: waiting for device to settle before scanning [ 756.404651] usb-storage: device scan complete [ 756.405721] scsi 8:0:0:0: Direct-Access WD My Passport 070A 1032 PQ: 0 ANSI: 4 [ 756.406717] scsi 8:0:0:1: CD-ROM WD Virtual CD 070A 1032 PQ: 0 ANSI: 4 [ 756.407704] scsi 8:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4 [ 756.416760] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 756.419981] sd 8:0:0:0: [sdb] 975400960 512-byte logical blocks: (499 GB/465 GiB) [ 756.421438] sr2: scsi3-mmc drive: 51x/51x caddy [ 756.421539] sr 8:0:0:1: Attached scsi CD-ROM sr2 [ 756.421588] sr 8:0:0:1: Attached scsi generic sg4 type 5 [ 756.421684] scsi 8:0:0:2: Attached scsi generic sg5 type 13 [ 756.423816] sd 8:0:0:0: [sdb] Write Protect is off [ 756.423820] sd 8:0:0:0: [sdb] Mode Sense: 23 00 10 00 [ 756.423822] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 756.426240] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 756.426247] sdb: sdb1 sdb2 sdb3 [ 756.448358] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 756.448370] sd 8:0:0:0: [sdb] Attached SCSI disk [ 756.489096] ses 8:0:0:2: Attached Enclosure device [ 756.926288] UDF-fs: Partition marked readonly; forcing readonly mount [ 756.927277] UDF-fs INFO UDF: Mounting volume 'WD SmartWare', timestamp 2009/11/14 07:34 (11a4) [ 760.988204] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 790.988246] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 820.988246] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 850.988093] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 880.988199] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 910.988203] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 933.522325] CE: hpet increasing min_delta_ns to 33750 nsec [ 940.988082] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 970.989074] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1000.988058] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1030.989264] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1060.989270] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1090.988226] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1120.989109] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1150.988200] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1180.988200] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1331.004125] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1361.028318] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1421.000257] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1451.000274] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1481.000269] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1511.000106] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1541.000069] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1571.000111] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1601.000199] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1631.000121] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1661.001182] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1691.000094] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1721.002299] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1751.001145] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1781.004063] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1841.000061] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1871.000091] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1901.000067] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1931.000089] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1990.988619] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2020.992726] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2080.988124] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2110.988230] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2140.988617] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2170.989199] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2174.475758] usb 2-4: USB disconnect, address 6 [ 2180.412020] usb 2-4: new high speed USB device using ehci_hcd and address 7 [ 2180.549850] usb 2-4: configuration #1 chosen from 4 choices [ 2181.812122] ipheth: ipheth_get_macaddr: usb_control_msg: -110 [ 2181.812136] ipheth: probe of 2-4:4.2 failed with error -110 [ 2201.000200] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2231.000104] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2261.000103] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2291.000128] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2321.000127] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2351.000039] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2381.000088] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2411.000097] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2441.000111] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2471.000117] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2501.000156] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2531.000087] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2561.004036] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2591.000103] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2621.000115] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2651.000110] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2681.000126] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2711.000192] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2741.000111] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2771.000131] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2801.000035] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2831.000192] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2861.000189] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2891.000101] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2921.000083] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2951.000222] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2981.000090] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3011.000181] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3041.000167] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3071.000107] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3101.004022] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3131.000062] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3161.000180] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3191.004044] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3221.000110] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3251.000066] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3281.000071] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3340.989077] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3370.988493] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3400.989030] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3430.989145] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3460.989054] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3490.989030] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3520.988210] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3550.989103] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3580.988109] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3610.988118] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3640.988207] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3670.988113] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3701.000116] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3731.000056] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3761.000091] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3791.000179] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3821.000139] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3851.000066] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3881.000185] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3911.000072] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3941.000202] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3971.000094] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4001.000131] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4031.000115] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4061.000193] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4091.000036] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4121.000090] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4151.000185] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4181.000116] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4211.000082] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4241.000133] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4271.000194] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4301.000039] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4331.000121] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4334.607579] usb 2-4: USB disconnect, address 7 [ 4361.000156] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4391.000250] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4421.000160] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4451.000212] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4481.000180] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4511.000194] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4541.000150] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4571.000176] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4601.004032] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4661.000145] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4691.000189] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4721.000208] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4751.000176] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4781.000184] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4811.000218] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4841.000198] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4871.000225] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4901.000031] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4931.000209] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4961.000209] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4991.000033] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5021.000253] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5051.000216] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5081.000247] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5111.000073] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5170.988108] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5201.000037] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5231.000109] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5261.000117] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5291.004085] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5321.000203] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5351.000218] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5381.000133] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5411.000176] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5441.000116] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5471.000140] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5480.392177] usb 2-4: new high speed USB device using ehci_hcd and address 8 [ 5480.532253] usb 2-4: configuration #1 chosen from 4 choices [ 5481.792058] ipheth: ipheth_get_macaddr: usb_control_msg: -110 [ 5481.792073] ipheth: probe of 2-4:4.2 failed with error -110 [ 5501.000037] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5531.000086] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5561.000094] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5591.000019] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5621.000064] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5651.000063] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5681.000084] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5711.000194] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5741.000068] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5771.000137] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5830.989177] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5860.989239] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5890.989075] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5920.989049] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5950.989043] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 5981.000082] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6011.000094] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6041.000105] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6071.000090] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6101.000078] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6131.001068] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6190.989080] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6220.989041] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6251.001310] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6281.000126] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6311.000196] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6341.000189] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6371.000126] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6401.004068] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6422.472805] usb 2-4: USB disconnect, address 8 [ 6431.000196] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6434.588143] option: option_instat_callback: error -108 [ 6434.589324] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 6434.589338] option 5-1:1.0: device disconnected [ 6434.589393] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 6434.589417] option 5-1:1.1: device disconnected [ 6434.700106] usb 5-1: reset full speed USB device using uhci_hcd and address 2 [ 6434.847370] option 5-1:1.1: GSM modem (1-port) converter detected [ 6434.847554] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 6434.849743] option 5-1:1.0: GSM modem (1-port) converter detected [ 6434.849903] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 6437.504202] usb 5-1: USB disconnect, address 2 [ 6437.506160] option: option_instat_callback: error -108 [ 6437.506627] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 6437.506664] option 5-1:1.0: device disconnected [ 6437.506958] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 6437.507002] option 5-1:1.1: device disconnected [ 6461.000211] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6465.408206] usb 2-4: new high speed USB device using ehci_hcd and address 9 [ 6465.547970] usb 2-4: configuration #1 chosen from 4 choices [ 6466.594352] ipheth 2-4:4.2: Apple iPhone USB Ethernet device attached [ 6472.988158] ------------[ cut here ]------------ [ 6472.988178] WARNING: at /build/buildd/linux-2.6.32/net/sched/sch_generic.c:261 dev_watchdog+0x1fe/0x210() [ 6472.988185] Hardware name: Presario V3500 Notebook PC [ 6472.988190] NETDEV WATCHDOG: wwan0 (ipheth): transmit queue 0 timed out [ 6472.988195] Modules linked in: udf crc_itu_t ses enclosure ipheth ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt ipt_MASQUERADE xt_state ipt_REJECT xt_tcpudp iptable_filter nf_nat_h323 nf_conntrack_h323 nf_nat_pptp nf_conntrack_pptp nf_conntrack_proto_gre nf_nat_proto_gre nf_nat_tftp nf_conntrack_tftp nf_nat_sip nf_conntrack_sip nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp nls_utf8 iptable_nat nf_nat nf_conntrack_ipv4 isofs nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc snd_hda_codec_conexant fbcon tileblit font bitblit softcursor vga16fb vgastate ppdev rfcomm sco bridge stp bnep option l2cap usbserial joydev arc4 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq iwl3945 snd_timer snd_seq_device iwlcore i915 drm_kms_helper mac80211 sdhci_pci snd btusb bluetooth drm sdhci led_class psmouse serio_raw soundcore snd_page_alloc cfg80211 intel_agp agpgart i2c_algo_bit video output lp parport usbhid hid usb_storage ohci1394 ahci ieee1394 sky2 [ 6472.988417] Pid: 0, comm: swapper Not tainted 2.6.32-21-generic #32-Ubuntu [ 6472.988423] Call Trace: [ 6472.988436] [] warn_slowpath_common+0x72/0xa0 [ 6472.988446] [] ? dev_watchdog+0x1fe/0x210 [ 6472.988454] [] ? dev_watchdog+0x1fe/0x210 [ 6472.988463] [] warn_slowpath_fmt+0x2b/0x30 [ 6472.988472] [] dev_watchdog+0x1fe/0x210 [ 6472.988484] [] ? try_to_wake_up+0x288/0x3b0 [ 6472.988494] [] ? insert_work+0x60/0xb0 [ 6472.988503] [] run_timer_softirq+0x13e/0x2c0 [ 6472.988514] [] ? tick_handle_oneshot_broadcast+0x12c/0x140 [ 6472.988525] [] ? sched_clock+0x8/0x10 [ 6472.988534] [] ? dev_watchdog+0x0/0x210 [ 6472.988542] [] __do_softirq+0x98/0x1b0 [ 6472.988555] [] ? handle_IRQ_event+0x54/0x150 [ 6472.988563] [] ? do_timer+0x20/0x30 [ 6472.988572] [] ? move_native_irq+0x19/0x50 [ 6472.988580] [] do_softirq+0x45/0x50 [ 6472.988587] [] irq_exit+0x65/0x70 [ 6472.988597] [] do_IRQ+0x55/0xc0 [ 6472.988605] [] ? sched_clock_local+0xa5/0x180 [ 6472.988615] [] common_interrupt+0x30/0x40 [ 6472.988623] [] ? sys_setrlimit+0xcb/0x120 [ 6472.988633] [] ? acpi_idle_enter_bm+0x26b/0x29a [ 6472.988644] [] cpuidle_idle_call+0x7a/0x100 [ 6472.988652] [] cpu_idle+0x94/0xd0 [ 6472.988662] [] start_secondary+0xc6/0xc8 [ 6472.988668] ---[ end trace f8c9495f05a77a40 ]--- [ 6472.988674] ipheth: ipheth_tx_timeout: TX timeout [ 6477.885008] wwan0: no IPv6 routers present [ 6491.000105] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6521.000124] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6551.000103] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6581.004051] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6611.000203] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6671.000207] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6701.004048] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6731.000211] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6790.988236] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6821.000226] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6851.000232] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6881.000112] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6911.000243] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6941.000200] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 6971.000100] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7031.000179] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7061.000187] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7091.002845] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7121.000196] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7151.000210] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7210.988202] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7241.000228] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7271.000191] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7301.000199] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7361.000195] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7421.000140] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7451.000183] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7481.000246] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7511.000219] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7571.000214] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7631.004029] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7661.000185] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7691.000021] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7721.000102] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7751.003729] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7781.000184] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 7811.000027] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)