[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-21-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #32-Ubuntu SMP Tue Dec 11 18:51:59 UTC 2012 (Ubuntu 3.5.0-21.32-generic 3.5.7.1) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-21-generic root=UUID=e81ea36d-897b-4f43-848d-666d7d71e7bc ro vesafb.invalid=1 splash quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfe6ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfe70000-0x00000000bfefffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: TOSHIBA Satellite M110/CAPELL VALLEY(NAPA) CRB, BIOS 6.00 07/12/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xbfe70 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] total RAM covered: 3071M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] found SMP MP-table at [mem 0x000f6a10-0x000f6a1f] mapped at [ffff8800000f6a10] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbfe6ffff] [ 0.000000] [mem 0x00000000-0xbfdfffff] page 2M [ 0.000000] [mem 0xbfe00000-0xbfe6ffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xbfe6ffff @ [mem 0x1fffb000-0x1fffffff] [ 0.000000] RAMDISK: [mem 0x362e4000-0x37169fff] [ 0.000000] ACPI: RSDP 00000000000f6960 00024 (v02 TOSINV) [ 0.000000] ACPI: XSDT 00000000bfe78436 0008C (v01 TOSINV TOSINV00 06040000 INV 00000000) [ 0.000000] ACPI: FACP 00000000bfe81bf8 000F4 (v03 TOSINV TOSINV00 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000bfe7a1cf 079B5 (v02 TOSINV CALISTGA 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000bfe82fc0 00040 [ 0.000000] ACPI: APIC 00000000bfe81cec 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 00000000bfe81d54 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000bfe81d8c 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 00000000bfe81dc8 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001) [ 0.000000] ACPI: APIC 00000000bfe81dfa 00068 (v01 TOSINV APIC 06040000 INV 00000000) [ 0.000000] ACPI: SLIC 00000000bfe81e62 00176 (v01 TOSINV TOSINV00 06040000 INV 00000000) [ 0.000000] ACPI: BOOT 00000000bfe81fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bfe79b80 0064F (v01 SataRe SataPri 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfe794ee 00692 (v01 SataRe SataSec 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfe78a4e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfe789a8 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfe784c2 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bfe6ffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbfe6ffff] [ 0.000000] NODE_DATA [mem 0xbfe6c000-0xbfe6ffff] [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc600000-ffff8800bf5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbfe6ffff] [ 0.000000] On node 0 totalpages: 785919 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12218 pages used for memmap [ 0.000000] DMA32 zone: 769718 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bfc00000 s83584 r8192 d22912 u1048576 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773631 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-21-generic root=UUID=e81ea36d-897b-4f43-848d-666d7d71e7bc ro vesafb.invalid=1 splash quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3063572k/3144128k available (6718k kernel code, 452k absent, 80104k reserved, 6452k data, 932k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 12582912 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: PIT calibration matches HPET. 1 loops [ 0.000000] Detected 1994.997 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.99 BogoMIPS (lpj=7979988) [ 0.008010] pid_max: default: 32768 minimum: 301 [ 0.008043] Security Framework initialized [ 0.008065] AppArmor: AppArmor initialized [ 0.008067] Yama: becoming mindful. [ 0.008527] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013032] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.014574] Mount-cache hash table entries: 256 [ 0.014885] Initializing cgroup subsys cpuacct [ 0.014893] Initializing cgroup subsys memory [ 0.014906] Initializing cgroup subsys devices [ 0.014908] Initializing cgroup subsys freezer [ 0.014910] Initializing cgroup subsys blkio [ 0.014913] Initializing cgroup subsys perf_event [ 0.014952] CPU: Physical Processor ID: 0 [ 0.014954] CPU: Processor Core ID: 0 [ 0.014957] mce: CPU supports 6 MCE banks [ 0.014966] CPU0: Thermal monitoring handled by SMI [ 0.014972] using mwait in idle threads. [ 0.017985] ACPI: Core revision 20120320 [ 0.017989] TOSHIBA Satellite detected - force copy of DSDT to local memory [ 0.018086] ACPI: Forced DSDT copy: length 0x079B5 copied locally, original unmapped [ 0.024013] ftrace: allocating 25138 entries in 99 pages [ 0.036541] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078479] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 0.080004] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.080004] PEBS disabled due to CPU errata. [ 0.080004] ... version: 2 [ 0.080004] ... bit width: 40 [ 0.080004] ... generic registers: 2 [ 0.080004] ... value mask: 000000ffffffffff [ 0.080004] ... max period: 000000007fffffff [ 0.080004] ... fixed-purpose events: 3 [ 0.080004] ... event mask: 0000000700000003 [ 0.080004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.080004] Booting Node 0, Processors #1 Ok. [ 0.012000] CPU1: Thermal monitoring handled by SMI [ 0.088091] Brought up 2 CPUs [ 0.088097] Total of 2 processors activated (7979.98 BogoMIPS). [ 0.090201] devtmpfs: initialized [ 0.090201] EVM: security.selinux [ 0.090201] EVM: security.SMACK64 [ 0.090201] EVM: security.capability [ 0.092036] PM: Registering ACPI NVS region [mem 0xbfe70000-0xbfefffff] (589824 bytes) [ 0.092884] dummy: [ 0.092924] RTC time: 15:28:35, date: 01/03/13 [ 0.092965] NET: Registered protocol family 16 [ 0.093012] Trying to unpack rootfs image as initramfs... [ 0.093191] ACPI: bus type pci registered [ 0.093265] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.093268] PCI: not using MMCONFIG [ 0.093270] PCI: Using configuration type 1 for base access [ 0.094442] bio: create slab at 0 [ 0.094551] ACPI: Added _OSI(Module Device) [ 0.094554] ACPI: Added _OSI(Processor Device) [ 0.094556] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.094558] ACPI: Added _OSI(Processor Aggregator Device) [ 0.097229] ACPI: EC: Look up EC in DSDT [ 0.100032] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.100637] ACPI: SSDT 00000000bfe791f4 0023D (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.101015] ACPI: Dynamic OEM Table Load: [ 0.101018] ACPI: SSDT (null) 0023D (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.101133] ACPI: SSDT 00000000bfe78cad 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.101494] ACPI: Dynamic OEM Table Load: [ 0.101497] ACPI: SSDT (null) 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.101705] ACPI: SSDT 00000000bfe79431 000BD (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.102074] ACPI: Dynamic OEM Table Load: [ 0.102077] ACPI: SSDT (null) 000BD (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.102159] ACPI: SSDT 00000000bfe7916f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.102522] ACPI: Dynamic OEM Table Load: [ 0.102525] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.108104] ACPI: Interpreter enabled [ 0.108109] ACPI: (supports S0 S3 S4 S5) [ 0.108131] ACPI: Using IOAPIC for interrupt routing [ 0.108151] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.108486] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.248325] ACPI: Power Resource [FN00] (off) [ 0.248691] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.296203] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.296215] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.296541] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.297067] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.297071] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.297074] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.297077] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.297080] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.297083] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored) [ 0.297086] PCI: root bus 00: using default resources [ 0.297139] PCI host bridge to bus 0000:00 [ 0.297143] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.297146] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.297161] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000 [ 0.297222] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400 [ 0.297273] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.297346] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.297370] pci 0000:00:1b.0: reg 10: [mem 0xf0c00000-0xf0c03fff 64bit] [ 0.297479] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.297515] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.297630] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.297667] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.297782] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.297819] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.297934] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.297974] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.298032] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f] [ 0.298077] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.298134] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f] [ 0.298181] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.298242] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f] [ 0.298287] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.298345] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f] [ 0.298402] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.298427] pci 0000:00:1d.7: reg 10: [mem 0xf0c04000-0xf0c043ff] [ 0.298539] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.298568] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.298668] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100 [ 0.298787] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.298794] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.298799] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 0003) [ 0.298804] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f) [ 0.298808] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0158 (mask 000f) [ 0.298874] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180 [ 0.298896] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.298909] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.298923] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.298936] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.298949] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf] [ 0.299007] pci 0000:00:1f.2: PME# supported from D3hot [ 0.299030] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.299105] pci 0000:00:1f.3: reg 20: [io 0x18c0-0x18df] [ 0.299218] pci 0000:01:00.0: [1002:7145] type 00 class 0x030000 [ 0.299239] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.299255] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff] [ 0.299271] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff] [ 0.299321] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.299404] pci 0000:01:00.0: supports D1 D2 [ 0.299429] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.299445] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.299449] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.299453] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff] [ 0.299458] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.299558] pci 0000:02:00.0: [8086:109a] type 00 class 0x020000 [ 0.299591] pci 0000:02:00.0: reg 10: [mem 0xf0600000-0xf061ffff] [ 0.299633] pci 0000:02:00.0: reg 18: [io 0x3000-0x301f] [ 0.299821] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.299866] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.299889] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.299895] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.299900] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.299909] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.299971] pci 0000:00:1c.1: PCI bridge to [bus 03-04] [ 0.299977] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.299982] pci 0000:00:1c.1: bridge window [mem 0xf0700000-0xf07fffff] [ 0.299991] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.300168] pci 0000:05:00.0: [8086:4222] type 00 class 0x028000 [ 0.300226] pci 0000:05:00.0: reg 10: [mem 0xf0800000-0xf0800fff] [ 0.300652] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.300734] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.300773] pci 0000:00:1c.2: PCI bridge to [bus 05-06] [ 0.300779] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.300784] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf08fffff] [ 0.300793] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.300853] pci 0000:07:06.0: [104c:8039] type 02 class 0x060700 [ 0.300881] pci 0000:07:06.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.300925] pci 0000:07:06.0: supports D1 D2 [ 0.300928] pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.300958] pci 0000:07:06.1: [104c:803a] type 00 class 0x0c0010 [ 0.300986] pci 0000:07:06.1: reg 10: [mem 0xf0905000-0xf09057ff] [ 0.301001] pci 0000:07:06.1: reg 14: [mem 0xf0900000-0xf0903fff] [ 0.301109] pci 0000:07:06.1: supports D1 D2 [ 0.301112] pci 0000:07:06.1: PME# supported from D0 D1 D2 D3hot [ 0.301141] pci 0000:07:06.2: [104c:803b] type 00 class 0x018000 [ 0.301167] pci 0000:07:06.2: reg 10: [mem 0xf0904000-0xf0904fff] [ 0.301282] pci 0000:07:06.2: supports D1 D2 [ 0.301284] pci 0000:07:06.2: PME# supported from D0 D1 D2 D3hot [ 0.301314] pci 0000:07:06.3: [104c:803c] type 00 class 0x080501 [ 0.301340] pci 0000:07:06.3: reg 10: [mem 0xf0905800-0xf09058ff] [ 0.301458] pci 0000:07:06.3: supports D1 D2 [ 0.301461] pci 0000:07:06.3: PME# supported from D0 D1 D2 D3hot [ 0.301531] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) [ 0.301540] pci 0000:00:1e.0: bridge window [mem 0xf0900000-0xf09fffff] [ 0.301548] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.301551] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.301555] pci 0000:07:06.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.301610] pci_bus 0000:08: [bus 08-0b] partially hidden behind transparent bridge 0000:07 [bus 07-07] [ 0.301646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.301767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.301822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.301866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.301908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.301977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.302038] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.302041] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.302043] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.400343] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.400399] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.400451] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.400503] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.400554] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.400607] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.400658] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.400708] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.400853] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.400860] vgaarb: loaded [ 0.400862] vgaarb: bridge control possible 0000:01:00.0 [ 0.401091] SCSI subsystem initialized [ 0.401160] libata version 3.00 loaded. [ 0.401185] ACPI: bus type usb registered [ 0.401214] usbcore: registered new interface driver usbfs [ 0.401226] usbcore: registered new interface driver hub [ 0.401256] usbcore: registered new device driver usb [ 0.401354] PCI: Using ACPI for IRQ routing [ 0.412524] PCI: pci_cache_line_size set to 64 bytes [ 0.412664] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.412667] e820: reserve RAM buffer [mem 0xbfe70000-0xbfffffff] [ 0.412806] NetLabel: Initializing [ 0.412809] NetLabel: domain hash size = 128 [ 0.412810] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.412826] NetLabel: unlabeled traffic allowed by default [ 0.412911] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.412917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.412923] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.416310] Switching to clocksource hpet [ 0.417451] Freeing initrd memory: 14872k freed [ 0.429474] AppArmor: AppArmor Filesystem Enabled [ 0.429519] pnp: PnP ACPI init [ 0.429544] ACPI: bus type pnp registered [ 0.430142] pnp 00:00: [bus 00-ff] [ 0.430146] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.430149] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.430152] pnp 00:00: [io 0x0d00-0xffff window] [ 0.430155] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.430157] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.430160] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.430162] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.430165] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.430167] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.430170] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.430172] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.430175] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.430177] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.430180] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.430183] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.430189] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.430191] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.430194] pnp 00:00: [mem 0xc0000000-0xfebfffff window] [ 0.430196] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.430284] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.430310] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.430313] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.430315] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.430317] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.430320] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.430322] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 0.430325] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.430327] pnp 00:01: [mem 0xfed45000-0xfed8ffff] [ 0.430399] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.430403] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.430406] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.430409] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.430412] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.430415] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.430418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.430421] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.430426] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.452224] pnp 00:02: [io 0x0000-0x001f] [ 0.452227] pnp 00:02: [io 0x0081-0x0091] [ 0.452230] pnp 00:02: [io 0x0093-0x009f] [ 0.452232] pnp 00:02: [io 0x00c0-0x00df] [ 0.452235] pnp 00:02: [dma 4] [ 0.452280] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.452290] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.452337] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.452406] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.452470] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.452474] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.452486] pnp 00:05: [io 0x00f0] [ 0.452503] pnp 00:05: [irq 13] [ 0.452552] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.452566] pnp 00:06: [io 0x002e-0x002f] [ 0.452568] pnp 00:06: [io 0x0061] [ 0.452571] pnp 00:06: [io 0x0063] [ 0.452573] pnp 00:06: [io 0x0065] [ 0.452575] pnp 00:06: [io 0x0067] [ 0.452577] pnp 00:06: [io 0x0070] [ 0.452580] pnp 00:06: [io 0x0080] [ 0.452582] pnp 00:06: [io 0x0092] [ 0.452584] pnp 00:06: [io 0x00b2-0x00b3] [ 0.452587] pnp 00:06: [io 0x03e8-0x03ef] [ 0.452589] pnp 00:06: [io 0x0400-0x0401] [ 0.452591] pnp 00:06: [io 0x0680-0x069f] [ 0.452594] pnp 00:06: [io 0x0800-0x080f] [ 0.452596] pnp 00:06: [io 0x1000-0x107f] [ 0.452598] pnp 00:06: [io 0x1180-0x11bf] [ 0.452601] pnp 00:06: [io 0x1640-0x164f] [ 0.452603] pnp 00:06: [io 0xfe00-0xfe01] [ 0.452677] system 00:06: [io 0x03e8-0x03ef] has been reserved [ 0.452680] system 00:06: [io 0x0400-0x0401] has been reserved [ 0.452683] system 00:06: [io 0x0680-0x069f] has been reserved [ 0.452686] system 00:06: [io 0x0800-0x080f] has been reserved [ 0.452689] system 00:06: [io 0x1000-0x107f] has been reserved [ 0.452692] system 00:06: [io 0x1180-0x11bf] has been reserved [ 0.452695] system 00:06: [io 0x1640-0x164f] has been reserved [ 0.452698] system 00:06: [io 0xfe00-0xfe01] has been reserved [ 0.452702] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.452712] pnp 00:07: [io 0x0070-0x0077] [ 0.452718] pnp 00:07: [irq 8] [ 0.452767] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.453174] pnp 00:08: [io 0x03f8-0x03ff] [ 0.453181] pnp 00:08: [irq 4] [ 0.453260] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.453708] pnp 00:09: [io 0x02f8-0x02ff] [ 0.453711] pnp 00:09: [io 0x0158-0x015f] [ 0.453718] pnp 00:09: [irq 3] [ 0.453720] pnp 00:09: [dma 3] [ 0.453830] pnp 00:09: Plug and Play ACPI device, IDs SMCf010 (active) [ 0.454151] pnp 00:0a: [io 0x0378-0x037f] [ 0.454154] pnp 00:0a: [io 0x0778-0x077f] [ 0.454161] pnp 00:0a: [irq 5] [ 0.454163] pnp 00:0a: [dma 1] [ 0.454261] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.454284] pnp 00:0b: [io 0x0060] [ 0.454287] pnp 00:0b: [io 0x0064] [ 0.454293] pnp 00:0b: [irq 1] [ 0.454341] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.454368] pnp 00:0c: [irq 12] [ 0.454422] pnp 00:0c: Plug and Play ACPI device, IDs SYN1902 SYN1900 SYN0002 PNP0f13 (active) [ 0.500127] pnp: PnP ACPI: found 13 devices [ 0.500129] ACPI: ACPI bus type pnp unregistered [ 0.507635] pci 0000:07:06.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.507639] pci 0000:07:06.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.507643] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 07-07] add_size 1000 [ 0.507647] pci 0000:07:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.507651] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 07-07] add_size 4000000 [ 0.507659] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.507662] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.507668] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref] [ 0.507672] pci 0000:00:1e.0: BAR 13: assigned [io 0x6000-0x6fff] [ 0.507677] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref] [ 0.507680] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.507684] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.507688] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff] [ 0.507692] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.507698] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.507702] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.507709] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.507714] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.507723] pci 0000:00:1c.1: PCI bridge to [bus 03-04] [ 0.507727] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.507733] pci 0000:00:1c.1: bridge window [mem 0xf0700000-0xf07fffff] [ 0.507739] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.507747] pci 0000:00:1c.2: PCI bridge to [bus 05-06] [ 0.507751] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.507758] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf08fffff] [ 0.507764] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.507774] pci 0000:07:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.507777] pci 0000:07:06.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.507780] pci 0000:07:06.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.507782] pci 0000:07:06.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.507786] pci 0000:07:06.0: BAR 0: assigned [mem 0xc4000000-0xc4000fff] [ 0.507793] pci 0000:07:06.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref] [ 0.507797] pci 0000:07:06.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff] [ 0.507800] pci 0000:07:06.0: BAR 13: assigned [io 0x6000-0x60ff] [ 0.507802] pci 0000:07:06.0: BAR 14: assigned [io 0x6400-0x64ff] [ 0.507806] pci 0000:07:06.0: CardBus bridge to [bus 08-0b] [ 0.507808] pci 0000:07:06.0: bridge window [io 0x6000-0x60ff] [ 0.507814] pci 0000:07:06.0: bridge window [io 0x6400-0x64ff] [ 0.507819] pci 0000:07:06.0: bridge window [mem 0xc0000000-0xc3ffffff pref] [ 0.507825] pci 0000:07:06.0: bridge window [mem 0xc8000000-0xcbffffff] [ 0.507831] pci 0000:00:1e.0: PCI bridge to [bus 07-07] [ 0.507835] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] [ 0.507842] pci 0000:00:1e.0: bridge window [mem 0xf0900000-0xf09fffff] [ 0.507848] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref] [ 0.507897] pci 0000:00:1e.0: setting latency timer to 64 [ 0.507905] pci 0000:07:06.0: enabling device (0000 -> 0003) [ 0.507918] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.507920] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.507923] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.507926] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff] [ 0.507928] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.507931] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.507934] pci_bus 0000:02: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.507936] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.507939] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.507942] pci_bus 0000:03: resource 1 [mem 0xf0700000-0xf07fffff] [ 0.507944] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.507947] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] [ 0.507949] pci_bus 0000:05: resource 1 [mem 0xf0800000-0xf08fffff] [ 0.507952] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.507954] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff] [ 0.507957] pci_bus 0000:07: resource 1 [mem 0xf0900000-0xf09fffff] [ 0.507959] pci_bus 0000:07: resource 2 [mem 0xc0000000-0xc3ffffff pref] [ 0.507962] pci_bus 0000:07: resource 4 [io 0x0000-0xffff] [ 0.507964] pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff] [ 0.507967] pci_bus 0000:08: resource 0 [io 0x6000-0x60ff] [ 0.507969] pci_bus 0000:08: resource 1 [io 0x6400-0x64ff] [ 0.507972] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc3ffffff pref] [ 0.507975] pci_bus 0000:08: resource 3 [mem 0xc8000000-0xcbffffff] [ 0.508031] NET: Registered protocol family 2 [ 0.508192] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.509419] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.515615] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.516462] TCP: Hash tables configured (established 524288 bind 65536) [ 0.516464] TCP: reno registered [ 0.516475] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.516534] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.516696] NET: Registered protocol family 1 [ 0.516917] pci 0000:01:00.0: Boot video device [ 0.516942] PCI: CLS mismatch (64 != 16), using 64 bytes [ 0.517001] Simple Boot Flag at 0x36 set to 0x1 [ 0.517451] audit: initializing netlink socket (disabled) [ 0.517464] type=2000 audit(1357226915.512:1): initialized [ 0.542091] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.544238] VFS: Disk quotas dquot_6.5.2 [ 0.544290] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.544881] fuse init (API version 7.19) [ 0.544985] msgmni has been set to 6012 [ 0.545528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.545571] io scheduler noop registered [ 0.545574] io scheduler deadline registered (default) [ 0.545608] io scheduler cfq registered [ 0.545760] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.545869] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.546002] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.546131] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.546232] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.546254] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.546314] intel_idle: does not run on family 6 model 15 [ 0.547541] ACPI: AC Adapter [ADP0] (on-line) [ 0.547808] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.547834] ACPI: Lid Switch [LID] [ 0.547884] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.547888] ACPI: Power Button [PWRB] [ 0.548086] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.548090] ACPI: Power Button [PWRF] [ 0.548165] ACPI: Fan [FAN0] (off) [ 0.548220] ACPI: Requesting acpi_cpufreq [ 0.549943] Monitor-Mwait will be used to enter C-1 state [ 0.549963] Monitor-Mwait will be used to enter C-2 state [ 0.549979] Monitor-Mwait will be used to enter C-3 state [ 0.549989] Marking TSC unstable due to TSC halts in idle [ 0.550007] ACPI: acpi_idle registered with cpuidle [ 0.692282] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.692285] ACPI: Thermal Zone [TZ00] (31 C) [ 0.692983] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.692985] ACPI: Thermal Zone [TZ01] (30 C) [ 0.693003] ACPI: Battery Slot [BAT0] (battery present) [ 0.693043] GHES: HEST is not enabled! [ 0.693134] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.696627] ACPI: Battery Slot [BAT0] (battery present) [ 0.713837] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.734431] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.756406] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.756694] Linux agpgart interface v0.103 [ 0.758532] brd: module loaded [ 0.759397] loop: module loaded [ 0.759535] ata_piix 0000:00:1f.2: version 2.13 [ 0.759553] ata_piix 0000:00:1f.2: MAP [ [ 0.759555] P0 P2 IDE IDE ] [ 0.912028] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.912352] scsi0 : ata_piix [ 0.912446] scsi1 : ata_piix [ 0.913014] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 [ 0.913017] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 [ 0.913329] Fixed MDIO Bus: probed [ 0.913377] tun: Universal TUN/TAP device driver, 1.6 [ 0.913379] tun: (C) 1999-2004 Max Krasnyansky [ 0.913434] PPP generic driver version 2.4.2 [ 0.913494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.913530] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.913535] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.913542] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.913568] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.913581] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.917481] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.917500] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0c04000 [ 0.928020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.928047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.928050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.928052] usb usb1: Product: EHCI Host Controller [ 0.928055] usb usb1: Manufacturer: Linux 3.5.0-21-generic ehci_hcd [ 0.928057] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.928190] hub 1-0:1.0: USB hub found [ 0.928195] hub 1-0:1.0: 8 ports detected [ 0.928282] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.928303] uhci_hcd: USB Universal Host Controller Interface driver [ 0.928325] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.928329] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.928336] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.928364] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 [ 0.928410] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.928413] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.928415] usb usb2: Product: UHCI Host Controller [ 0.928418] usb usb2: Manufacturer: Linux 3.5.0-21-generic uhci_hcd [ 0.928421] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.928540] hub 2-0:1.0: USB hub found [ 0.928545] hub 2-0:1.0: 2 ports detected [ 0.928617] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.928621] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.928627] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.928668] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 0.928704] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.928707] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.928709] usb usb3: Product: UHCI Host Controller [ 0.928712] usb usb3: Manufacturer: Linux 3.5.0-21-generic uhci_hcd [ 0.928714] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.928826] hub 3-0:1.0: USB hub found [ 0.928831] hub 3-0:1.0: 2 ports detected [ 0.928903] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.928907] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.928916] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.928953] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 0.928994] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.928997] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.929000] usb usb4: Product: UHCI Host Controller [ 0.929002] usb usb4: Manufacturer: Linux 3.5.0-21-generic uhci_hcd [ 0.929005] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.929115] hub 4-0:1.0: USB hub found [ 0.929120] hub 4-0:1.0: 2 ports detected [ 0.929194] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.929198] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.929204] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.929245] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 0.929283] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.929286] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.929288] usb usb5: Product: UHCI Host Controller [ 0.929291] usb usb5: Manufacturer: Linux 3.5.0-21-generic uhci_hcd [ 0.929293] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.929405] hub 5-0:1.0: USB hub found [ 0.929410] hub 5-0:1.0: 2 ports detected [ 0.929526] usbcore: registered new interface driver libusual [ 0.929567] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.932521] i8042: Detected active multiplexing controller, rev 1.1 [ 0.934012] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.934018] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.934048] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.934073] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.934096] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.934248] mousedev: PS/2 mouse device common for all mice [ 0.934458] rtc_cmos 00:07: RTC can wake from S4 [ 0.934620] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.934653] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.934739] device-mapper: uevent: version 1.0.3 [ 0.934815] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.934863] cpuidle: using governor ladder [ 0.934919] cpuidle: using governor menu [ 0.934922] EFI Variables Facility v0.08 2004-May-17 [ 0.935169] ashmem: initialized [ 0.935312] TCP: cubic registered [ 0.935427] NET: Registered protocol family 10 [ 0.935650] NET: Registered protocol family 17 [ 0.935664] Key type dns_resolver registered [ 0.935862] PM: Hibernation image not present or could not be loaded. [ 0.935876] registered taskstats version 1 [ 0.938722] Key type trusted registered [ 0.941018] Key type encrypted registered [ 0.943738] Magic number: 13:708:486 [ 0.943878] rtc_cmos 00:07: setting system clock to 2013-01-03 15:28:36 UTC (1357226916) [ 0.944449] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.944452] EDD information not available. [ 0.968647] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.078237] ata1.00: ATA-8: SAMSUNG HM320JI, 2SS00_01, max UDMA7 [ 1.078244] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.092760] ata2.00: ATAPI: PIONEER DVD-RW DVR-K16A, 1.63, max UDMA/33 [ 1.094421] ata1.00: configured for UDMA/133 [ 1.094639] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM320JI 2SS0 PQ: 0 ANSI: 5 [ 1.094883] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.094947] sd 0:0:0:0: [sda] Write Protect is off [ 1.094951] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.094954] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.094984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.124648] ata2.00: configured for UDMA/33 [ 1.138388] sda: sda1 sda2 < sda5 sda6 > [ 1.139011] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.147877] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K16A 1.63 PQ: 0 ANSI: 5 [ 1.159912] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.159917] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.160121] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.160295] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.161809] Freeing unused kernel memory: 932k freed [ 1.162168] Write protecting the kernel read-only data: 12288k [ 1.166974] Freeing unused kernel memory: 1464k freed [ 1.171071] Freeing unused kernel memory: 1120k freed [ 1.189254] udevd[95]: starting version 175 [ 1.240061] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 1.240066] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 1.244981] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 1.245309] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.245487] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 1.302225] sdhci: Secure Digital Host Controller Interface driver [ 1.302229] sdhci: Copyright(c) Pierre Ossman [ 1.302518] sdhci-pci 0000:07:06.3: SDHCI controller found [104c:803c] (rev 0) [ 1.302579] mmc0: no vmmc regulator found [ 1.302616] Registered led device: mmc0:: [ 1.332134] mmc0: SDHCI controller on PCI [0000:07:06.3] using DMA [ 1.353088] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:a0:d1:5c:84:f1 [ 1.353093] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.353171] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF [ 1.388139] firewire_ohci 0000:07:06.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.636447] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 1.636452] EXT4-fs (sda6): write access will be enabled during recovery [ 1.792046] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 1.888236] firewire_core 0000:07:06.1: created device fw0: GUID 00080d0000000000, S400 [ 1.969450] usb 2-1: New USB device found, idVendor=0930, idProduct=0508 [ 1.969459] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.212136] usb 3-2: new low-speed USB device number 2 using uhci_hcd [ 2.430736] usb 3-2: New USB device found, idVendor=04f3, idProduct=00a4 [ 2.430743] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.430749] usb 3-2: Product: 2.4G RX [ 2.529849] usbcore: registered new interface driver usbhid [ 2.529854] usbhid: USB HID core driver [ 2.532638] input: 2.4G RX as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4 [ 2.532832] hid-generic 0003:04F3:00A4.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G RX] on usb-0000:00:1d.1-2/input0 [ 3.025143] EXT4-fs (sda6): recovery complete [ 3.033907] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 25.992891] Adding 1975292k swap on /dev/sda5. Priority:-1 extents:1 across:1975292k [ 25.999103] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.123546] udevd[343]: starting version 175 [ 26.474647] type=1400 audit(1357226942.024:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=639 comm="apparmor_parser" [ 26.475046] type=1400 audit(1357226942.024:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=458 comm="apparmor_parser" [ 26.475112] type=1400 audit(1357226942.024:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=639 comm="apparmor_parser" [ 26.475370] type=1400 audit(1357226942.024:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=639 comm="apparmor_parser" [ 26.475717] type=1400 audit(1357226942.024:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=458 comm="apparmor_parser" [ 26.475980] type=1400 audit(1357226942.024:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=458 comm="apparmor_parser" [ 26.625174] acpi device:03: registered as cooling_device3 [ 26.625230] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 26.625366] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 26.663323] wmi: Mapper loaded [ 26.724203] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler [ 26.725570] toshiba_bluetooth: Re-enabling Toshiba Bluetooth [ 26.829740] lp: driver loaded but no devices found [ 26.936091] usb 2-1: USB disconnect, device number 2 [ 26.944416] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 [ 26.947600] input: Toshiba input device as /devices/virtual/input/input6 [ 26.948451] ACPI Error: No handler for Region [ERAM] (ffff8800bae32870) [EmbeddedControl] (20120320/evregion-376) [ 26.948457] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20120320/exfldio-306) [ 26.948463] ACPI Error: Method parse/execution failed [\_SB_.VALZ.SPFC] (Node ffff8800bae345a0), AE_NOT_EXIST (20120320/psparse-536) [ 26.949059] Registered led device: toshiba::illumination [ 26.967999] parport_pc 00:0a: reported by Plug and Play ACPI [ 26.968105] parport0: PC-style at 0x378 (0x778), irq 5, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 27.024571] cfg80211: Calling CRDA to update world regulatory domain [ 27.031769] Bluetooth: Core ver 2.16 [ 27.031790] NET: Registered protocol family 31 [ 27.031792] Bluetooth: HCI device and connection manager initialized [ 27.031795] Bluetooth: HCI socket layer initialized [ 27.031797] Bluetooth: L2CAP socket layer initialized [ 27.031802] Bluetooth: SCO socket layer initialized [ 27.032393] cfg80211: World regulatory domain updated: [ 27.032397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.032400] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.032402] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.032404] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.032406] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.032408] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.064248] lp0: using parport0 (interrupt-driven). [ 27.072544] ppdev: user-space parallel port driver [ 27.085961] intel_rng: FWH not detected [ 27.113074] yenta_cardbus 0000:07:06.0: CardBus bridge found [1179:ff10] [ 27.113096] yenta_cardbus 0000:07:06.0: Enabling burst memory read transactions [ 27.113103] yenta_cardbus 0000:07:06.0: Using CSCINT to route CSC interrupts to PCI [ 27.113106] yenta_cardbus 0000:07:06.0: Routing CardBus interrupts to PCI [ 27.113112] yenta_cardbus 0000:07:06.0: TI: mfunc 0x01a01b22, devctl 0x66 [ 27.208698] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7 [ 27.255838] usbcore: registered new interface driver btusb [ 27.267991] ACPI Warning: 0x0000000000001060-0x000000000000107f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 27.267999] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.268007] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 27.268023] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 27.268028] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.268032] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251) [ 27.268037] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.268038] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 27.295141] irda_init() [ 27.295151] NET: Registered protocol family 23 [ 27.344727] yenta_cardbus 0000:07:06.0: ISA IRQ mask 0x0cd8, PCI irq 18 [ 27.344732] yenta_cardbus 0000:07:06.0: Socket status: 30000006 [ 27.344736] pci_bus 0000:07: Raising subordinate bus# of parent bus (#07) from #07 to #0b [ 27.344746] yenta_cardbus 0000:07:06.0: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff] [ 27.344750] yenta_cardbus 0000:07:06.0: pcmcia: parent PCI bridge window: [mem 0xf0900000-0xf09fffff] [ 27.344754] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0900000-0xf09fffff: [ 27.344759] excluding 0xf0900000-0xf090ffff [ 27.344770] yenta_cardbus 0000:07:06.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref] [ 27.344773] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: [ 27.344782] excluding 0xc0000000-0xc3ffffff [ 27.424069] usb 2-1: new full-speed USB device number 3 using uhci_hcd [ 27.478668] leds_ss4200: no LED devices found [ 27.497587] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0/0x0 [ 27.497597] psmouse serio4: synaptics: Toshiba Satellite M110 detected, limiting rate to 40pps. [ 27.531267] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 27.606448] usb 2-1: New USB device found, idVendor=0930, idProduct=0508 [ 27.606457] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 27.657103] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 27.657113] excluding 0xc0000-0xd3fff 0xdc000-0xfffff [ 27.657137] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 27.657145] excluding 0xa0000000-0xa0ffffff [ 27.657163] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 27.657170] excluding 0x60000000-0x60ffffff [ 27.672144] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7 [ 27.674505] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 27.742189] [drm] Initialized drm 1.1.0 20060810 [ 27.999765] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 27.999770] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 28.054004] iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 28.054008] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 28.054159] iwl3945 0000:05:00.0: irq 45 for MSI/MSI-X [ 28.054367] Registered led device: phy0-led [ 28.054423] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 28.163442] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 28.244046] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 28.308443] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 28.308624] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 28.328352] [drm] radeon defaulting to kernel modesetting. [ 28.328356] [drm] radeon kernel modesetting enabled. [ 28.328426] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 28.328432] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 28.328663] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x1179:0xFF10). [ 28.328686] [drm] register mmio base: 0xCFEF0000 [ 28.328688] [drm] register mmio size: 65536 [ 28.328793] ATOM BIOS: M54P [ 28.328809] [drm] Generation 2 PCI interface, using max accessible memory [ 28.328814] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) [ 28.328817] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF [ 28.328833] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 28.328834] [drm] Driver supports precise vblank timestamp query. [ 28.328845] [drm] radeon: irq initialized. [ 28.330674] [drm] Detected VRAM RAM=256M, BAR=256M [ 28.330679] [drm] RAM width 128bits DDR [ 28.330765] [TTM] Zone kernel: Available graphics memory: 1540980 kiB [ 28.330767] [TTM] Initializing pool allocator [ 28.330772] [TTM] Initializing DMA pool allocator [ 28.330801] [drm] radeon: 256M of VRAM memory ready [ 28.330803] [drm] radeon: 512M of GTT memory ready. [ 28.330828] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 28.332556] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 28.333452] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 28.333475] radeon 0000:01:00.0: WB enabled [ 28.333479] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffff8800a2977000 [ 28.333758] [drm] Loading R500 Microcode [ 28.337659] [drm] radeon: ring at 0x0000000010001000 [ 28.337697] [drm] ring test succeeded in 10 usecs [ 28.337830] [drm] ib test succeeded in 0 usecs [ 28.338580] [drm] Radeon Display Connectors [ 28.338582] [drm] Connector 0: [ 28.338584] [drm] VGA-1 [ 28.338587] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 28.338588] [drm] Encoders: [ 28.338590] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 28.338591] [drm] Connector 1: [ 28.338593] [drm] LVDS-1 [ 28.338595] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 28.338596] [drm] Encoders: [ 28.338598] [drm] LCD1: INTERNAL_LVTM1 [ 28.338599] [drm] Connector 2: [ 28.338601] [drm] SVIDEO-1 [ 28.338602] [drm] Encoders: [ 28.338603] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 28.338605] [drm] Connector 3: [ 28.338606] [drm] DVI-I-1 [ 28.338607] [drm] HPD1 [ 28.338610] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 28.338611] [drm] Encoders: [ 28.338612] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 28.338621] [drm] Possible adm1032 thermal controller at 0x4c [ 28.338717] [drm] radeon: power management initialized [ 28.903813] [drm] fb mappable at 0xD00C0000 [ 28.903818] [drm] vram apper at 0xD0000000 [ 28.903819] [drm] size 4096000 [ 28.903821] [drm] fb depth is 24 [ 28.903822] [drm] pitch is 5120 [ 28.903972] fbcon: radeondrmfb (fb0) is primary device [ 28.946895] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 29.139585] Console: switching to colour frame buffer device 160x50 [ 29.142816] fb0: radeondrmfb frame buffer device [ 29.142816] drm: registered panic notifier [ 29.142823] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0 [ 29.173227] init: failsafe main process (850) killed by TERM signal [ 29.175065] lm90 2-004c: Register 0x4 read failed (-6) [ 29.175069] lm90 2-004c: Failed to read convrate register! [ 29.177813] lm90 2-004c: Register 0x3 read failed (-6) [ 29.177816] lm90 2-004c: Initialization failed! [ 29.431024] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 29.431029] Bluetooth: BNEP filters: protocol multicast [ 29.437490] type=1400 audit(1357226944.988:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=963 comm="apparmor_parser" [ 29.438049] type=1400 audit(1357226944.988:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=963 comm="apparmor_parser" [ 29.468962] Bluetooth: RFCOMM TTY layer initialized [ 29.468975] Bluetooth: RFCOMM socket layer initialized [ 29.468977] Bluetooth: RFCOMM ver 1.11 [ 29.682970] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 29.784154] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 29.785203] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.785664] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.796193] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9 [ 29.819175] type=1400 audit(1357226945.368:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1005 comm="apparmor_parser" [ 29.819558] type=1400 audit(1357226945.368:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1005 comm="apparmor_parser" [ 29.867062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.867345] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.032564] init: gdm main process (1095) killed by TERM signal [ 30.538469] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0 [ 30.986825] nvidia: module license 'NVIDIA' taints kernel. [ 30.986833] Disabling lock debugging due to kernel taint [ 31.008794] NVRM: No NVIDIA graphics adapter found! [ 31.366664] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 31.366671] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 31.367280] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 36.800688] wlan0: authenticate with 00:1e:c1:62:b5:d0 [ 36.803241] wlan0: send auth to 00:1e:c1:62:b5:d0 (try 1/3) [ 36.805014] wlan0: authenticated [ 36.808915] wlan0: associate with 00:1e:c1:62:b5:d0 (try 1/3) [ 36.813093] wlan0: RX AssocResp from 00:1e:c1:62:b5:d0 (capab=0x431 status=0 aid=1) [ 36.814408] wlan0: associated [ 36.815032] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.815115] cfg80211: Calling CRDA for country: PT [ 36.820209] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 36.820214] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820216] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 36.820219] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820221] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 36.820223] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820225] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 36.820227] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820229] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 36.820232] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820234] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 36.820236] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820238] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 36.820240] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820242] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 36.820244] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820246] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 36.820249] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820251] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 36.820253] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820255] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 36.820257] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820259] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 36.820261] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820263] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 36.820266] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820268] cfg80211: Disabling freq 5170 MHz [ 36.820269] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 36.820272] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820274] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule: [ 36.820276] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820278] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 36.820280] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820282] cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule: [ 36.820284] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820286] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 36.820289] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820291] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule: [ 36.820293] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820295] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 36.820297] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820299] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 36.820301] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820303] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 36.820306] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820308] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 36.820310] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820312] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 36.820314] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 36.820316] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 36.820318] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820320] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 36.820323] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820325] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 36.820327] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820329] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 36.820331] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820333] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 36.820335] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820337] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule: [ 36.820340] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820342] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule: [ 36.820344] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820346] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule: [ 36.820348] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820350] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 36.820352] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820354] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 36.820357] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820358] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 36.820361] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 36.820363] cfg80211: Regulatory domain changed to country: PT [ 36.820364] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 36.820367] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.820369] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.820371] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.820373] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 37.557117] CE: hpet increased min_delta_ns to 20113 nsec [ 37.557595] CE: hpet increased min_delta_ns to 30169 nsec [ 37.558109] CE: hpet increased min_delta_ns to 45253 nsec [ 56.650100] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0 [ 126.064550] do_trap: 63 callbacks suppressed [ 126.064556] evolution[2703] trap int3 ip:7f634e1fdc7f sp:7fff171177c0 error:0