[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz root=UUID=D60A84020A83DDBD loop=/ubuntu/disks/root.disk preseed/file=/ubuntu/install/preseed.cfg wubi-diskimage ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ba60fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ba61000-0x000000007babefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007babf000-0x000000007bb81fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007bb82000-0x000000007bbbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007bbbf000-0x000000007bbe1fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007bbe2000-0x000000007bbf6fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007bbf7000-0x000000007bbfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007bc00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Hewlett-Packard /3069, BIOS F.02 03/16/2009 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7bc00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FC0000000 write-back [ 0.000000] 2 base 0FFF00000 mask FFFF00000 write-protect [ 0.000000] 3 base 07C000000 mask FFC000000 uncachable [ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7bbfffff] [ 0.000000] [mem 0x00000000-0x7bbfffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x7bbfffff @ [mem 0x1fffd000-0x1fffffff] [ 0.000000] RAMDISK: [mem 0x36a50000-0x3751ffff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000007bbf6120 00064 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000007bbf5000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000007bbe5000 0B9E7 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: FACS 000000007bb8f000 00040 [ 0.000000] ACPI: HPET 000000007bbf4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000007bbf3000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000007bbf2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: ASF! 000000007bbf1000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000007bbe4000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: BOOT 000000007bbe3000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007bbe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bbfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7bbfffff] [ 0.000000] NODE_DATA [mem 0x7bbfc000-0x7bbfffff] [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880079200000-ffff88007b1fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x7ba60fff] [ 0.000000] node 0: [mem 0x7babf000-0x7bb81fff] [ 0.000000] node 0: [mem 0x7bbbf000-0x7bbe1fff] [ 0.000000] node 0: [mem 0x7bbf7000-0x7bbfffff] [ 0.000000] On node 0 totalpages: 506590 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7856 pages used for memmap [ 0.000000] DMA32 zone: 494752 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007ba61000 - 000000007babf000 [ 0.000000] PM: Registered nosave memory: 000000007bb82000 - 000000007bbbf000 [ 0.000000] PM: Registered nosave memory: 000000007bbe2000 - 000000007bbf7000 [ 0.000000] e820: [mem 0x80000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007b800000 s83584 r8192 d22912 u524288 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 498664 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=UUID=D60A84020A83DDBD loop=/ubuntu/disks/root.disk preseed/file=/ubuntu/install/preseed.cfg wubi-diskimage ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1966228k/2027520k available (6711k kernel code, 1160k absent, 60132k reserved, 6459k data, 928k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 8388608 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.714 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.42 BogoMIPS (lpj=6650856) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004049] Security Framework initialized [ 0.004073] AppArmor: AppArmor initialized [ 0.004075] Yama: becoming mindful. [ 0.004379] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.009160] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.009880] Mount-cache hash table entries: 256 [ 0.010229] Initializing cgroup subsys cpuacct [ 0.010238] Initializing cgroup subsys memory [ 0.010255] Initializing cgroup subsys devices [ 0.010257] Initializing cgroup subsys freezer [ 0.010259] Initializing cgroup subsys blkio [ 0.010261] Initializing cgroup subsys perf_event [ 0.010307] CPU: Physical Processor ID: 0 [ 0.010309] CPU: Processor Core ID: 0 [ 0.010311] mce: CPU supports 6 MCE banks [ 0.010322] CPU0: Thermal monitoring enabled (TM1) [ 0.010327] using mwait in idle threads. [ 0.013825] ACPI: Core revision 20120320 [ 0.024023] ftrace: allocating 25118 entries in 99 pages [ 0.036509] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078818] CPU0: Genuine Intel(R) CPU T1600 @ 1.66GHz stepping 0d [ 0.080004] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.080004] PEBS disabled due to CPU errata. [ 0.080004] ... version: 2 [ 0.080004] ... bit width: 40 [ 0.080004] ... generic registers: 2 [ 0.080004] ... value mask: 000000ffffffffff [ 0.080004] ... max period: 000000007fffffff [ 0.080004] ... fixed-purpose events: 3 [ 0.080004] ... event mask: 0000000700000003 [ 0.080004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.080004] Booting Node 0, Processors #1 [ 0.088103] Brought up 2 CPUs [ 0.088111] Total of 2 processors activated (6650.85 BogoMIPS). [ 0.089153] devtmpfs: initialized [ 0.089451] EVM: security.selinux [ 0.089454] EVM: security.SMACK64 [ 0.089456] EVM: security.capability [ 0.092047] PM: Registering ACPI NVS region [mem 0x7bb82000-0x7bbbefff] (249856 bytes) [ 0.093085] dummy: [ 0.093122] RTC time: 16:45:25, date: 02/06/13 [ 0.093180] NET: Registered protocol family 16 [ 0.093195] Trying to unpack rootfs image as initramfs... [ 0.093463] ACPI: bus type pci registered [ 0.093560] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.093564] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.102561] PCI: Using configuration type 1 for base access [ 0.103994] bio: create slab at 0 [ 0.104155] ACPI: Added _OSI(Module Device) [ 0.104158] ACPI: Added _OSI(Processor Device) [ 0.104160] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.104163] ACPI: Added _OSI(Processor Aggregator Device) [ 0.107082] ACPI: EC: Look up EC in DSDT [ 0.110059] ACPI: Executed 1 blocks of module-level executable AML code [ 0.112206] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 1.312803] ACPI: SSDT 000000007ba6e618 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 1.313499] ACPI: Dynamic OEM Table Load: [ 1.313504] ACPI: SSDT (null) 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 1.864690] ACPI: SSDT 000000007ba70f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 1.865446] ACPI: Dynamic OEM Table Load: [ 1.865459] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 2.568598] ACPI: Interpreter enabled [ 2.568598] ACPI: (supports S0 S3 S4 S5) [ 2.568598] ACPI: Using IOAPIC for interrupt routing [ 2.577756] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 2.578005] ACPI: No dock devices found. [ 2.578012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.578435] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.579101] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7] [ 2.579106] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff] [ 2.579110] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff] [ 2.579115] pci_root PNP0A08:00: >host bridge window [mem 0x80000000-0xfebfffff] [ 2.579162] PCI host bridge to bus 0000:00 [ 2.579166] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7] [ 2.579169] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff] [ 2.579172] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff] [ 2.579175] pci_bus 0000:00: >root bus resource [mem 0x80000000-0xfebfffff] [ 2.579190] pci 0000:00:00.0: >[8086:2a40] type 00 class 0x060000 [ 2.579221] DMAR: Forcing write-buffer flush capability [ 2.579223] DMAR: Disabling IOMMU for graphics on this chipset [ 2.579259] pci 0000:00:02.0: >[8086:2a42] type 00 class 0x030000 [ 2.579278] pci 0000:00:02.0: >reg 10: [mem 0x90000000-0x903fffff 64bit] [ 2.579290] pci 0000:00:02.0: >reg 18: [mem 0x80000000-0x8fffffff 64bit pref] [ 2.579298] pci 0000:00:02.0: >reg 20: [io 0x4110-0x4117] [ 2.579351] pci 0000:00:02.1: >[8086:2a43] type 00 class 0x038000 [ 2.579367] pci 0000:00:02.1: >reg 10: [mem 0x92400000-0x924fffff 64bit] [ 2.579470] pci 0000:00:1a.0: >[8086:2937] type 00 class 0x0c0300 [ 2.579533] pci 0000:00:1a.0: >reg 20: [io 0x40e0-0x40ff] [ 2.579611] pci 0000:00:1a.1: >[8086:2938] type 00 class 0x0c0300 [ 2.579675] pci 0000:00:1a.1: >reg 20: [io 0x40c0-0x40df] [ 2.579764] pci 0000:00:1a.7: >[8086:293c] type 00 class 0x0c0320 [ 2.582065] pci 0000:00:1a.7: >reg 10: [mem 0x94505c00-0x94505fff] [ 2.606097] pci 0000:00:1a.7: >PME# supported from D0 D3hot D3cold [ 2.606137] pci 0000:00:1b.0: >[8086:293e] type 00 class 0x040300 [ 2.606158] pci 0000:00:1b.0: >reg 10: [mem 0x94500000-0x94503fff 64bit] [ 2.606250] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold [ 2.606281] pci 0000:00:1c.0: >[8086:2940] type 01 class 0x060400 [ 2.606376] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold [ 2.606408] pci 0000:00:1c.1: >[8086:2942] type 01 class 0x060400 [ 2.606504] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold [ 2.606545] pci 0000:00:1d.0: >[8086:2934] type 00 class 0x0c0300 [ 2.606610] pci 0000:00:1d.0: >reg 20: [io 0x40a0-0x40bf] [ 2.606689] pci 0000:00:1d.1: >[8086:2935] type 00 class 0x0c0300 [ 2.606753] pci 0000:00:1d.1: >reg 20: [io 0x4080-0x409f] [ 2.606832] pci 0000:00:1d.2: >[8086:2936] type 00 class 0x0c0300 [ 2.606896] pci 0000:00:1d.2: >reg 20: [io 0x4060-0x407f] [ 2.606973] pci 0000:00:1d.3: >[8086:2939] type 00 class 0x0c0300 [ 2.607037] pci 0000:00:1d.3: >reg 20: [io 0x4040-0x405f] [ 2.607125] pci 0000:00:1d.7: >[8086:293a] type 00 class 0x0c0320 [ 2.610037] pci 0000:00:1d.7: >reg 10: [mem 0x94505800-0x94505bff] [ 2.636223] pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold [ 2.636256] pci 0000:00:1e.0: >[8086:2448] type 01 class 0x060401 [ 2.636342] pci 0000:00:1f.0: >[8086:2919] type 00 class 0x060100 [ 2.636495] pci 0000:00:1f.2: >[8086:2929] type 00 class 0x010601 [ 2.636521] pci 0000:00:1f.2: >reg 10: [io 0x4108-0x410f] [ 2.636533] pci 0000:00:1f.2: >reg 14: [io 0x411c-0x411f] [ 2.636544] pci 0000:00:1f.2: >reg 18: [io 0x4100-0x4107] [ 2.636556] pci 0000:00:1f.2: >reg 1c: [io 0x4118-0x411b] [ 2.636567] pci 0000:00:1f.2: >reg 20: [io 0x4020-0x403f] [ 2.636579] pci 0000:00:1f.2: >reg 24: [mem 0x94505000-0x945057ff] [ 2.636644] pci 0000:00:1f.2: >PME# supported from D3hot [ 2.636670] pci 0000:00:1f.3: >[8086:2930] type 00 class 0x0c0500 [ 2.636691] pci 0000:00:1f.3: >reg 10: [mem 0x94506000-0x945060ff 64bit] [ 2.636720] pci 0000:00:1f.3: >reg 20: [io 0x4000-0x401f] [ 2.636769] pci 0000:00:1f.6: >[8086:2932] type 00 class 0x118000 [ 2.636799] pci 0000:00:1f.6: >reg 10: [mem 0x94504000-0x94504fff 64bit] [ 2.636976] pci 0000:02:00.0: >[168c:001c] type 00 class 0x020000 [ 2.637004] pci 0000:02:00.0: >reg 10: [mem 0x93500000-0x9350ffff 64bit] [ 2.637172] pci 0000:02:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.637185] pci 0000:00:1c.0: >PCI bridge to [bus 02-02] [ 2.637190] pci 0000:00:1c.0: > bridge window [io 0x3000-0x3fff] [ 2.637196] pci 0000:00:1c.0: > bridge window [mem 0x93500000-0x944fffff] [ 2.637204] pci 0000:00:1c.0: > bridge window [mem 0x90400000-0x913fffff 64bit pref] [ 2.637281] pci 0000:03:00.0: >[10ec:8136] type 00 class 0x020000 [ 2.637302] pci 0000:03:00.0: >reg 10: [io 0x2000-0x20ff] [ 2.637338] pci 0000:03:00.0: >reg 18: [mem 0x91410000-0x91410fff 64bit pref] [ 2.637361] pci 0000:03:00.0: >reg 20: [mem 0x91400000-0x9140ffff 64bit pref] [ 2.637376] pci 0000:03:00.0: >reg 30: [mem 0xffff0000-0xffffffff pref] [ 2.637458] pci 0000:03:00.0: >supports D1 D2 [ 2.637461] pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold [ 2.644188] pci 0000:00:1c.1: >PCI bridge to [bus 03-03] [ 2.644195] pci 0000:00:1c.1: > bridge window [io 0x2000-0x2fff] [ 2.644201] pci 0000:00:1c.1: > bridge window [mem 0x92500000-0x934fffff] [ 2.644209] pci 0000:00:1c.1: > bridge window [mem 0x91400000-0x923fffff 64bit pref] [ 2.644290] pci 0000:00:1e.0: >PCI bridge to [bus 04-04] (subtractive decode) [ 2.644303] pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.644306] pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.644309] pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.644312] pci 0000:00:1e.0: > bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 2.644336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.644580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 2.644677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 2.644734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 2.644884] pci0000:00: >Requesting ACPI _OSC control (0x1d) [ 2.645067] pci0000:00: >ACPI _OSC control (0x1c) granted [ 2.649758] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 2.649831] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 2.649902] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 2.649971] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 2.650044] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) [ 2.650112] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 2.650180] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 2.650253] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 2.650412] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.650428] vgaarb: loaded [ 2.650430] vgaarb: bridge control possible 0000:00:02.0 [ 2.650689] SCSI subsystem initialized [ 2.650771] libata version 3.00 loaded. [ 2.650810] ACPI: bus type usb registered [ 2.650841] usbcore: registered new interface driver usbfs [ 2.650859] usbcore: registered new interface driver hub [ 2.650894] usbcore: registered new device driver usb [ 2.651009] PCI: Using ACPI for IRQ routing [ 2.653090] PCI: pci_cache_line_size set to 64 bytes [ 2.653203] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 2.653206] e820: reserve RAM buffer [mem 0x7ba61000-0x7bffffff] [ 2.653209] e820: reserve RAM buffer [mem 0x7bb82000-0x7bffffff] [ 2.653212] e820: reserve RAM buffer [mem 0x7bbe2000-0x7bffffff] [ 2.653214] e820: reserve RAM buffer [mem 0x7bc00000-0x7bffffff] [ 2.653352] NetLabel: Initializing [ 2.653354] NetLabel: domain hash size = 128 [ 2.653356] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.653374] NetLabel: unlabeled traffic allowed by default [ 2.653468] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 2.653474] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 2.653481] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 3.184613] Switching to clocksource hpet [ 3.197500] AppArmor: AppArmor Filesystem Enabled [ 3.197548] pnp: PnP ACPI init [ 3.197577] ACPI: bus type pnp registered [ 3.197621] pnp 00:00: >[mem 0xf8000000-0xfbffffff] [ 3.197697] system 00:00: >[mem 0xf8000000-0xfbffffff] has been reserved [ 3.197704] system 00:00: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.198378] pnp 00:01: >[bus 00-ff] [ 3.198382] pnp 00:01: >[io 0x0000-0x0cf7 window] [ 3.198386] pnp 00:01: >[io 0x0cf8-0x0cff] [ 3.198389] pnp 00:01: >[io 0x0d00-0xffff window] [ 3.198392] pnp 00:01: >[mem 0x000a0000-0x000bffff window] [ 3.198395] pnp 00:01: >[mem 0x000c0000-0x000c3fff window] [ 3.198398] pnp 00:01: >[mem 0x000c4000-0x000c7fff window] [ 3.198401] pnp 00:01: >[mem 0x000c8000-0x000cbfff window] [ 3.198404] pnp 00:01: >[mem 0x000cc000-0x000cffff window] [ 3.198407] pnp 00:01: >[mem 0x000d0000-0x000d3fff window] [ 3.198410] pnp 00:01: >[mem 0x000d4000-0x000d7fff window] [ 3.198413] pnp 00:01: >[mem 0x000d8000-0x000dbfff window] [ 3.198416] pnp 00:01: >[mem 0x000dc000-0x000dffff window] [ 3.198419] pnp 00:01: >[mem 0x000e0000-0x000e3fff window] [ 3.198422] pnp 00:01: >[mem 0x000e4000-0x000e7fff window] [ 3.198429] pnp 00:01: >[mem 0x000e8000-0x000ebfff window] [ 3.198432] pnp 00:01: >[mem 0x000ec000-0x000effff window] [ 3.198435] pnp 00:01: >[mem 0x000f0000-0x000fffff window] [ 3.198438] pnp 00:01: >[mem 0x80000000-0xfebfffff window] [ 3.198441] pnp 00:01: >[mem 0xfed40000-0xfed44fff window] [ 3.198538] pnp 00:01: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 3.198732] pnp 00:02: >[io 0x002e-0x002f] [ 3.198735] pnp 00:02: >[io 0x004e-0x004f] [ 3.198738] pnp 00:02: >[io 0x164e-0x164f] [ 3.198741] pnp 00:02: >[io 0x0061] [ 3.198743] pnp 00:02: >[io 0x0070] [ 3.198746] pnp 00:02: >[io 0x0080] [ 3.198748] pnp 00:02: >[io 0x0092] [ 3.198751] pnp 00:02: >[io 0x00b2-0x00b3] [ 3.198753] pnp 00:02: >[io 0x0063] [ 3.198756] pnp 00:02: >[io 0x0065] [ 3.198758] pnp 00:02: >[io 0x0067] [ 3.198761] pnp 00:02: >[io 0x0600-0x060f] [ 3.198764] pnp 00:02: >[io 0x0610] [ 3.198766] pnp 00:02: >[io 0x0800-0x080f] [ 3.198769] pnp 00:02: >[io 0x0810-0x0817] [ 3.198772] pnp 00:02: >[io 0x0820-0x0823] [ 3.198774] pnp 00:02: >[io 0x0400-0x047f] [ 3.198777] pnp 00:02: >[io 0x0500-0x053f] [ 3.198780] pnp 00:02: >[io 0x0380-0x0387] [ 3.198783] pnp 00:02: >[mem 0xf8000000-0xfbffffff] [ 3.198785] pnp 00:02: >[mem 0xfed1c000-0xfed1ffff] [ 3.198788] pnp 00:02: >[mem 0xfed10000-0xfed13fff] [ 3.198791] pnp 00:02: >[mem 0xfed18000-0xfed18fff] [ 3.198794] pnp 00:02: >[mem 0xfed19000-0xfed19fff] [ 3.198797] pnp 00:02: >[mem 0xfec00000-0xfec00fff] [ 3.198800] pnp 00:02: >[mem 0xfed20000-0xfed3ffff] [ 3.198802] pnp 00:02: >[mem 0xfed40000-0xfed44fff] [ 3.198805] pnp 00:02: >[mem 0xfed45000-0xfed8ffff] [ 3.198808] pnp 00:02: >[mem 0xfee00000-0xfee00fff] [ 3.198908] system 00:02: >[io 0x164e-0x164f] has been reserved [ 3.198913] system 00:02: >[io 0x0600-0x060f] has been reserved [ 3.198917] system 00:02: >[io 0x0610] has been reserved [ 3.198921] system 00:02: >[io 0x0800-0x080f] has been reserved [ 3.198924] system 00:02: >[io 0x0810-0x0817] has been reserved [ 3.198928] system 00:02: >[io 0x0820-0x0823] has been reserved [ 3.198931] system 00:02: >[io 0x0400-0x047f] has been reserved [ 3.198935] system 00:02: >[io 0x0500-0x053f] has been reserved [ 3.198938] system 00:02: >[io 0x0380-0x0387] has been reserved [ 3.198943] system 00:02: >[mem 0xf8000000-0xfbffffff] has been reserved [ 3.198947] system 00:02: >[mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.198950] system 00:02: >[mem 0xfed10000-0xfed13fff] has been reserved [ 3.198954] system 00:02: >[mem 0xfed18000-0xfed18fff] has been reserved [ 3.198958] system 00:02: >[mem 0xfed19000-0xfed19fff] has been reserved [ 3.198962] system 00:02: >[mem 0xfec00000-0xfec00fff] could not be reserved [ 3.198965] system 00:02: >[mem 0xfed20000-0xfed3ffff] has been reserved [ 3.198969] system 00:02: >[mem 0xfed40000-0xfed44fff] has been reserved [ 3.198973] system 00:02: >[mem 0xfed45000-0xfed8ffff] has been reserved [ 3.198977] system 00:02: >[mem 0xfee00000-0xfee00fff] has been reserved [ 3.198982] system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.198995] pnp 00:03: >[io 0x0000-0x001f] [ 3.198998] pnp 00:03: >[io 0x0081-0x0091] [ 3.199001] pnp 00:03: >[io 0x0093-0x009f] [ 3.199003] pnp 00:03: >[io 0x00c0-0x00df] [ 3.199006] pnp 00:03: >[dma 4] [ 3.199052] pnp 00:03: >Plug and Play ACPI device, IDs PNP0200 (active) [ 3.199083] pnp 00:04: >[io 0x0070-0x0077] [ 3.199123] pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active) [ 3.199204] pnp 00:05: >[irq 0 disabled] [ 3.199223] pnp 00:05: >[irq 8] [ 3.199226] pnp 00:05: >[mem 0xfed00000-0xfed003ff] [ 3.199272] pnp 00:05: >Plug and Play ACPI device, IDs PNP0103 (active) [ 3.199286] pnp 00:06: >[io 0x00f0] [ 3.199293] pnp 00:06: >[irq 13] [ 3.199334] pnp 00:06: >Plug and Play ACPI device, IDs PNP0c04 (active) [ 3.199348] pnp 00:07: >[mem 0xff800000-0xffffffff] [ 3.199392] pnp 00:07: >Plug and Play ACPI device, IDs INT0800 (active) [ 3.199413] pnp 00:08: >[io 0x0060] [ 3.199416] pnp 00:08: >[io 0x0064] [ 3.199423] pnp 00:08: >[irq 1] [ 3.199474] pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active) [ 3.199498] pnp 00:09: >[irq 12] [ 3.199555] pnp 00:09: >Plug and Play ACPI device, IDs SYN1e08 SYN1e00 SYN0002 PNP0f13 (active) [ 3.199835] pnp: PnP ACPI: found 10 devices [ 3.199838] ACPI: ACPI bus type pnp unregistered [ 3.206496] pci 0000:03:00.0: >no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 3.206555] pci 0000:00:1c.0: >PCI bridge to [bus 02-02] [ 3.206561] pci 0000:00:1c.0: > bridge window [io 0x3000-0x3fff] [ 3.206568] pci 0000:00:1c.0: > bridge window [mem 0x93500000-0x944fffff] [ 3.206573] pci 0000:00:1c.0: > bridge window [mem 0x90400000-0x913fffff 64bit pref] [ 3.206585] pci 0000:03:00.0: >BAR 6: assigned [mem 0x91420000-0x9142ffff pref] [ 3.206589] pci 0000:00:1c.1: >PCI bridge to [bus 03-03] [ 3.206593] pci 0000:00:1c.1: > bridge window [io 0x2000-0x2fff] [ 3.206600] pci 0000:00:1c.1: > bridge window [mem 0x92500000-0x934fffff] [ 3.206605] pci 0000:00:1c.1: > bridge window [mem 0x91400000-0x923fffff 64bit pref] [ 3.206614] pci 0000:00:1e.0: >PCI bridge to [bus 04-04] [ 3.206667] pci 0000:00:1e.0: >setting latency timer to 64 [ 3.206673] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7] [ 3.206676] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff] [ 3.206679] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff] [ 3.206682] pci_bus 0000:00: >resource 7 [mem 0x80000000-0xfebfffff] [ 3.206685] pci_bus 0000:02: >resource 0 [io 0x3000-0x3fff] [ 3.206688] pci_bus 0000:02: >resource 1 [mem 0x93500000-0x944fffff] [ 3.206691] pci_bus 0000:02: >resource 2 [mem 0x90400000-0x913fffff 64bit pref] [ 3.206694] pci_bus 0000:03: >resource 0 [io 0x2000-0x2fff] [ 3.206697] pci_bus 0000:03: >resource 1 [mem 0x92500000-0x934fffff] [ 3.206700] pci_bus 0000:03: >resource 2 [mem 0x91400000-0x923fffff 64bit pref] [ 3.206703] pci_bus 0000:04: >resource 4 [io 0x0000-0x0cf7] [ 3.206706] pci_bus 0000:04: >resource 5 [io 0x0d00-0xffff] [ 3.206709] pci_bus 0000:04: >resource 6 [mem 0x000a0000-0x000bffff] [ 3.206712] pci_bus 0000:04: >resource 7 [mem 0x80000000-0xfebfffff] [ 3.206766] NET: Registered protocol family 2 [ 3.206904] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 3.207724] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 3.210714] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 3.211444] TCP: Hash tables configured (established 262144 bind 65536) [ 3.211448] TCP: reno registered [ 3.211469] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 3.211500] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 3.211680] NET: Registered protocol family 1 [ 3.211713] pci 0000:00:02.0: >Boot video device [ 3.244059] PCI: CLS 64 bytes, default 64 [ 3.244118] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 3.244120] Simple Boot Flag at 0x44 set to 0x1 [ 3.244563] audit: initializing netlink socket (disabled) [ 3.244579] type=2000 audit(1360169127.240:1): initialized [ 3.273861] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.276137] VFS: Disk quotas dquot_6.5.2 [ 3.276200] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.276901] fuse init (API version 7.19) [ 3.277007] msgmni has been set to 3840 [ 3.277429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 3.277468] io scheduler noop registered [ 3.277471] io scheduler deadline registered (default) [ 3.277511] io scheduler cfq registered [ 3.277726] pcieport 0000:00:1c.0: >irq 40 for MSI/MSI-X [ 3.277888] pcieport 0000:00:1c.1: >irq 41 for MSI/MSI-X [ 3.278025] pcieport 0000:00:1c.0: >Signaling PME through PCIe PME interrupt [ 3.278029] pci 0000:02:00.0: >Signaling PME through PCIe PME interrupt [ 3.278035] pcie_pme 0000:00:1c.0:pcie01: >service driver pcie_pme loaded [ 3.278059] pcieport 0000:00:1c.1: >Signaling PME through PCIe PME interrupt [ 3.278062] pci 0000:03:00.0: >Signaling PME through PCIe PME interrupt [ 3.278069] pcie_pme 0000:00:1c.1:pcie01: >service driver pcie_pme loaded [ 3.278088] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.278114] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.278182] intel_idle: does not run on family 6 model 15 [ 3.280771] ACPI: AC Adapter [ACAD] (on-line) [ 3.280904] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 3.280911] ACPI: Power Button [PWRB] [ 3.280965] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 3.283528] ACPI: Lid Switch [LID0] [ 3.283585] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 3.283589] ACPI: Sleep Button [SLPB] [ 3.283662] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.283666] ACPI: Power Button [PWRF] [ 3.283870] Monitor-Mwait will be used to enter C-1 state [ 3.283878] Monitor-Mwait will be used to enter C-2 state [ 3.283885] Monitor-Mwait will be used to enter C-3 state [ 3.283890] Marking TSC unstable due to TSC halts in idle [ 3.283901] ACPI: acpi_idle registered with cpuidle [ 3.655434] [Firmware Bug]: Invalid critical threshold (0) [ 3.655695] Freeing initrd memory: 11072k freed [ 3.656658] thermal LNXTHERM:00: >registered as thermal_zone0 [ 3.656671] ACPI: Thermal Zone [TZ01] (62 C) [ 3.656775] ACPI: Battery Slot [BAT0] (battery absent) [ 3.656872] GHES: HEST is not enabled! [ 3.657181] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.659595] Linux agpgart interface v0.103 [ 3.659775] agpgart-intel 0000:00:00.0: >Intel GM45 Chipset [ 3.659897] agpgart-intel 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable [ 3.660831] agpgart-intel 0000:00:00.0: >detected 65536K stolen memory [ 3.661020] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0x80000000 [ 3.663835] brd: module loaded [ 3.663931] ACPI: Battery Slot [BAT0] (battery absent) [ 3.664928] loop: module loaded [ 3.665096] ahci 0000:00:1f.2: >version 3.0 [ 3.665180] ahci 0000:00:1f.2: >irq 42 for MSI/MSI-X [ 3.665291] ahci 0000:00:1f.2: >AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 3.665296] ahci 0000:00:1f.2: >flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs [ 3.665302] ahci 0000:00:1f.2: >setting latency timer to 64 [ 3.688708] scsi0 : ahci [ 3.688839] scsi1 : ahci [ 3.688929] scsi2 : ahci [ 3.689016] scsi3 : ahci [ 3.689107] scsi4 : ahci [ 3.689195] scsi5 : ahci [ 3.689372] ata1: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505100 irq 42 [ 3.689376] ata2: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505180 irq 42 [ 3.689378] ata3: DUMMY [ 3.689380] ata4: DUMMY [ 3.689383] ata5: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505300 irq 42 [ 3.689387] ata6: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505380 irq 42 [ 3.689834] Fixed MDIO Bus: probed [ 3.689892] tun: Universal TUN/TAP device driver, 1.6 [ 3.689894] tun: (C) 1999-2004 Max Krasnyansky [ 3.689980] PPP generic driver version 2.4.2 [ 3.690073] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.690150] ehci_hcd 0000:00:1a.7: >setting latency timer to 64 [ 3.690156] ehci_hcd 0000:00:1a.7: >EHCI Host Controller [ 3.690165] ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1 [ 3.690203] ehci_hcd 0000:00:1a.7: >debug port 1 [ 3.694100] ehci_hcd 0000:00:1a.7: >cache line size of 64 is not supported [ 3.694124] ehci_hcd 0000:00:1a.7: >irq 19, io mem 0x94505c00 [ 3.704021] ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00 [ 3.704052] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 [ 3.704056] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.704059] usb usb1: >Product: EHCI Host Controller [ 3.704061] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 3.704064] usb usb1: >SerialNumber: 0000:00:1a.7 [ 3.704233] hub 1-0:1.0: >USB hub found [ 3.704239] hub 1-0:1.0: >4 ports detected [ 3.704345] ehci_hcd 0000:00:1d.7: >setting latency timer to 64 [ 3.704350] ehci_hcd 0000:00:1d.7: >EHCI Host Controller [ 3.704358] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2 [ 3.704394] ehci_hcd 0000:00:1d.7: >debug port 1 [ 3.708293] ehci_hcd 0000:00:1d.7: >cache line size of 64 is not supported [ 3.708311] ehci_hcd 0000:00:1d.7: >irq 20, io mem 0x94505800 [ 3.720021] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00 [ 3.720063] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002 [ 3.720066] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.720069] usb usb2: >Product: EHCI Host Controller [ 3.720072] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 3.720075] usb usb2: >SerialNumber: 0000:00:1d.7 [ 3.720196] hub 2-0:1.0: >USB hub found [ 3.720201] hub 2-0:1.0: >8 ports detected [ 3.720303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.720328] uhci_hcd: USB Universal Host Controller Interface driver [ 3.720358] uhci_hcd 0000:00:1a.0: >setting latency timer to 64 [ 3.720363] uhci_hcd 0000:00:1a.0: >UHCI Host Controller [ 3.720370] uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3 [ 3.720411] uhci_hcd 0000:00:1a.0: >irq 16, io base 0x000040e0 [ 3.720455] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001 [ 3.720458] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.720461] usb usb3: >Product: UHCI Host Controller [ 3.720464] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 3.720467] usb usb3: >SerialNumber: 0000:00:1a.0 [ 3.720581] hub 3-0:1.0: >USB hub found [ 3.720587] hub 3-0:1.0: >2 ports detected [ 3.720674] uhci_hcd 0000:00:1a.1: >setting latency timer to 64 [ 3.720679] uhci_hcd 0000:00:1a.1: >UHCI Host Controller [ 3.720685] uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4 [ 3.720727] uhci_hcd 0000:00:1a.1: >irq 21, io base 0x000040c0 [ 3.720770] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001 [ 3.720774] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.720777] usb usb4: >Product: UHCI Host Controller [ 3.720780] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 3.720783] usb usb4: >SerialNumber: 0000:00:1a.1 [ 3.720896] hub 4-0:1.0: >USB hub found [ 3.720902] hub 4-0:1.0: >2 ports detected [ 3.720985] uhci_hcd 0000:00:1d.0: >setting latency timer to 64 [ 3.720989] uhci_hcd 0000:00:1d.0: >UHCI Host Controller [ 3.720996] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 5 [ 3.721025] uhci_hcd 0000:00:1d.0: >irq 20, io base 0x000040a0 [ 3.721066] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001 [ 3.721069] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.721072] usb usb5: >Product: UHCI Host Controller [ 3.721075] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 3.721078] usb usb5: >SerialNumber: 0000:00:1d.0 [ 3.721192] hub 5-0:1.0: >USB hub found [ 3.721197] hub 5-0:1.0: >2 ports detected [ 3.721281] uhci_hcd 0000:00:1d.1: >setting latency timer to 64 [ 3.721285] uhci_hcd 0000:00:1d.1: >UHCI Host Controller [ 3.721292] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 6 [ 3.721320] uhci_hcd 0000:00:1d.1: >irq 19, io base 0x00004080 [ 3.721362] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001 [ 3.721366] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.721369] usb usb6: >Product: UHCI Host Controller [ 3.721372] usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 3.721375] usb usb6: >SerialNumber: 0000:00:1d.1 [ 3.721490] hub 6-0:1.0: >USB hub found [ 3.721495] hub 6-0:1.0: >2 ports detected [ 3.721578] uhci_hcd 0000:00:1d.2: >setting latency timer to 64 [ 3.721583] uhci_hcd 0000:00:1d.2: >UHCI Host Controller [ 3.721593] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 7 [ 3.721621] uhci_hcd 0000:00:1d.2: >irq 16, io base 0x00004060 [ 3.721665] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001 [ 3.721669] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.721672] usb usb7: >Product: UHCI Host Controller [ 3.721674] usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 3.721677] usb usb7: >SerialNumber: 0000:00:1d.2 [ 3.721786] hub 7-0:1.0: >USB hub found [ 3.721792] hub 7-0:1.0: >2 ports detected [ 3.721878] uhci_hcd 0000:00:1d.3: >setting latency timer to 64 [ 3.721882] uhci_hcd 0000:00:1d.3: >UHCI Host Controller [ 3.721889] uhci_hcd 0000:00:1d.3: >new USB bus registered, assigned bus number 8 [ 3.721932] uhci_hcd 0000:00:1d.3: >irq 18, io base 0x00004040 [ 3.721973] usb usb8: >New USB device found, idVendor=1d6b, idProduct=0001 [ 3.721977] usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.721980] usb usb8: >Product: UHCI Host Controller [ 3.721983] usb usb8: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 3.721986] usb usb8: >SerialNumber: 0000:00:1d.3 [ 3.722102] hub 8-0:1.0: >USB hub found [ 3.722108] hub 8-0:1.0: >2 ports detected [ 3.722263] usbcore: registered new interface driver libusual [ 3.722315] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 3.738787] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.738796] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.738958] mousedev: PS/2 mouse device common for all mice [ 3.740689] rtc_cmos 00:04: >RTC can wake from S4 [ 3.740844] rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0 [ 3.740878] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 3.740982] device-mapper: uevent: version 1.0.3 [ 3.741067] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.741125] cpuidle: using governor ladder [ 3.741191] cpuidle: using governor menu [ 3.741193] EFI Variables Facility v0.08 2004-May-17 [ 3.741512] ashmem: initialized [ 3.741674] TCP: cubic registered [ 3.741814] NET: Registered protocol family 10 [ 3.742081] NET: Registered protocol family 17 [ 3.742104] Key type dns_resolver registered [ 3.742327] PM: Hibernation image not present or could not be loaded. [ 3.742354] registered taskstats version 1 [ 3.745694] Key type trusted registered [ 3.748549] Key type encrypted registered [ 3.751832] Magic number: 1:358:792 [ 3.751985] rtc_cmos 00:04: >setting system clock to 2013-02-06 16:45:28 UTC (1360169128) [ 3.752166] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.752168] EDD information not available. [ 3.755645] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 4.008077] ata5: SATA link down (SStatus 0 SControl 300) [ 4.012041] ata6: SATA link down (SStatus 0 SControl 300) [ 4.180052] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.180970] ata1.00: ATA-8: WDC WD1600BEVT-60ZCT1, 13.01A13, max UDMA/100 [ 4.180974] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.181934] ata1.00: configured for UDMA/100 [ 4.182107] scsi 0:0:0:0: >Direct-Access ATA WDC WD1600BEVT-6 13.0 PQ: 0 ANSI: 5 [ 4.182267] sd 0:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 4.182313] sd 0:0:0:0: >Attached scsi generic sg0 type 0 [ 4.182333] sd 0:0:0:0: >[sda] Write Protect is off [ 4.182337] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00 [ 4.182365] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.184051] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.187899] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100 [ 4.192653] ata2.00: configured for UDMA/100 [ 4.204066] usb 2-4: >new high-speed USB device number 2 using ehci_hcd [ 4.247647] sda: sda1 sda2 sda3 sda4 < sda5 > [ 4.248330] sd 0:0:0:0: >[sda] Attached SCSI disk [ 4.309873] scsi 1:0:0:0: >CD-ROM HL-DT-ST DVDRAM GSA-T50L SC04 PQ: 0 ANSI: 5 [ 4.371125] usb 2-4: >New USB device found, idVendor=064e, idProduct=a102 [ 4.371130] usb 2-4: >New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 4.371133] usb 2-4: >Product: HP Webcam-101 [ 4.371136] usb 2-4: >Manufacturer: SuYin [ 4.371139] usb 2-4: >SerialNumber: CN0316-S30C-OV09-VH-R01.00.00 [ 4.419923] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.419927] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.420074] sr 1:0:0:0: >Attached scsi CD-ROM sr0 [ 4.420172] sr 1:0:0:0: >Attached scsi generic sg1 type 5 [ 4.421989] Freeing unused kernel memory: 928k freed [ 4.422341] Write protecting the kernel read-only data: 12288k [ 4.428574] Freeing unused kernel memory: 1472k freed [ 4.433919] Freeing unused kernel memory: 1124k freed [ 4.459990] udevd[101]: starting version 175 [ 4.555511] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.555665] r8169 0000:03:00.0: >irq 43 for MSI/MSI-X [ 4.555934] r8169 0000:03:00.0: >eth0: RTL8102e at 0xffffc90000308000, 00:00:00:00:00:00, XID 04c00000 IRQ 43 [ 4.612040] usb 4-2: >new low-speed USB device number 2 using uhci_hcd [ 4.780795] usb 4-2: >New USB device found, idVendor=1bcf, idProduct=0005 [ 4.780802] usb 4-2: >New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.780805] usb 4-2: >Product: USB Optical Mouse [ 4.805883] usbcore: registered new interface driver usbhid [ 4.805888] usbhid: USB HID core driver [ 4.808989] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input5 [ 4.809155] hid-generic 0003:1BCF:0005.0001: >input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2/input0 [ 5.270606] kjournald starting. Commit interval 5 seconds [ 5.270836] EXT3-fs (loop0): mounted filesystem with ordered data mode [ 6.035392] EXT3-fs (loop0): using internal journal [ 57.591922] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen [ 57.591928] ata1.00: irq_stat 0x00400040, connection status changed [ 57.591932] ata1: SError: { PHYRdyChg DevExch } [ 57.591935] ata1.00: failed command: FLUSH CACHE EXT [ 57.591942] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 57.591942] res 40/00:4c:b8:bd:8a/00:00:0f:00:00/40 Emask 0x10 (ATA bus error) [ 57.591945] ata1.00: status: { DRDY } [ 57.591951] ata1: hard resetting link [ 60.980056] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 60.983155] ata1.00: configured for UDMA/100 [ 60.983159] ata1.00: retrying FLUSH 0xea Emask 0x10 [ 60.983369] ata1: EH complete [ 64.923698] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 64.928329] JFS: nTxBlock = 8192, nTxLock = 65536 [ 64.968602] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 65.005092] QNX4 filesystem 0.2.3 registered. [ 65.035376] Btrfs loaded [ 70.320416] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k [ 71.695951] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 71.748314] udevd[6724]: starting version 175 [ 72.768205] EXT3-fs (loop0): using internal journal [ 73.161153] wmi: Mapper loaded [ 73.303635] [drm] Initialized drm 1.1.0 20060810 [ 73.312259] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMBA 1 (20120320/utaddress-251) [ 73.312271] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 73.312275] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 73.312279] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20120320/utaddress-251) [ 73.312285] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 73.312290] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251) [ 73.312295] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 73.312297] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 73.434747] cfg80211: Calling CRDA to update world regulatory domain [ 73.537439] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 [ 73.557782] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 74.057917] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 [ 74.063046] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 74.200736] i915 0000:00:02.0: >setting latency timer to 64 [ 74.245624] i915 0000:00:02.0: >irq 44 for MSI/MSI-X [ 74.245639] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 74.245641] [drm] Driver supports precise vblank timestamp query. [ 74.245698] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 74.410388] i915: fixme: max PWM is zero [ 74.675557] Linux video capture interface: v2.00 [ 74.806768] fbcon: inteldrmfb (fb0) is primary device [ 74.894450] cfg80211: World regulatory domain updated: [ 74.894452] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 74.894455] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 74.894457] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 74.894459] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 74.894460] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 74.894462] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 74.900787] ath5k 0000:02:00.0: >registered as 'phy0' [ 74.939581] uvcvideo: Found UVC 1.00 device HP Webcam-101 (064e:a102) [ 74.957036] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7 [ 74.957326] usbcore: registered new interface driver uvcvideo [ 74.957327] USB Video Class driver (1.1.1) [ 75.088692] psmouse serio1: >synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0 [ 75.116434] Console: switching to colour frame buffer device 170x48 [ 75.120681] fb0: inteldrmfb frame buffer device [ 75.120682] drm: registered panic notifier [ 75.125519] init: failsafe main process (6980) killed by TERM signal [ 75.144924] acpi device:03: >registered as cooling_device2 [ 75.145071] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 75.145584] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 75.146274] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 75.146449] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X [ 75.167074] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 75.452831] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 75.453045] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 75.453207] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 75.492128] ath: EEPROM regdomain: 0x67 [ 75.492132] ath: EEPROM indicates we should expect a direct regpair map [ 75.492136] ath: Country alpha2 being used: 00 [ 75.492138] ath: Regpair used: 0x67 [ 75.492142] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 75.492145] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492148] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 75.492150] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492153] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 75.492155] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492158] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 75.492160] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492163] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 75.492165] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492167] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 75.492170] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492172] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 75.492175] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492178] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 75.492180] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492183] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 75.492185] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492188] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 75.492190] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492193] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 75.492195] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492197] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 75.492200] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492202] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 75.492205] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 75.492208] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 75.492331] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 75.685122] ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht' [ 75.685511] Registered led device: ath5k-phy0::rx [ 75.685538] Registered led device: ath5k-phy0::tx [ 75.685549] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 76.738426] lp: driver loaded but no devices found [ 76.929434] Bluetooth: Core ver 2.16 [ 76.929473] NET: Registered protocol family 31 [ 76.929475] Bluetooth: HCI device and connection manager initialized [ 76.929478] Bluetooth: HCI socket layer initialized [ 76.929480] Bluetooth: L2CAP socket layer initialized [ 76.929487] Bluetooth: SCO socket layer initialized [ 76.933360] ppdev: user-space parallel port driver [ 77.051535] Bluetooth: RFCOMM TTY layer initialized [ 77.051544] Bluetooth: RFCOMM socket layer initialized [ 77.051546] Bluetooth: RFCOMM ver 1.11 [ 77.220937] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 77.220942] Bluetooth: BNEP filters: protocol multicast [ 78.976341] type=1400 audit(1360165603.721:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=7193 comm="apparmor_parser" [ 78.976983] type=1400 audit(1360165603.721:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=7193 comm="apparmor_parser" [ 80.902140] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 80.902848] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 80.909330] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 83.168905] type=1400 audit(1360165607.913:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=7271 comm="apparmor_parser" [ 83.169485] type=1400 audit(1360165607.913:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=7271 comm="apparmor_parser" [ 83.207739] type=1400 audit(1360165607.949:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=7270 comm="apparmor_parser" [ 83.208359] type=1400 audit(1360165607.953:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=7270 comm="apparmor_parser" [ 83.720520] type=1400 audit(1360165608.465:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=7272 comm="apparmor_parser" [ 83.722026] type=1400 audit(1360165608.465:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=7272 comm="apparmor_parser" [ 83.736790] type=1400 audit(1360165608.481:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=7273 comm="apparmor_parser" [ 83.737128] type=1400 audit(1360165608.481:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7273 comm="apparmor_parser" [ 85.647335] audit_printk_skb: 3 callbacks suppressed [ 85.647340] type=1400 audit(1360165610.389:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=7276 comm="apparmor_parser" [ 85.648169] type=1400 audit(1360165610.393:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=7276 comm="apparmor_parser" [ 85.648962] type=1400 audit(1360165610.393:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=7276 comm="apparmor_parser" [ 85.654458] type=1400 audit(1360165610.397:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=7277 comm="apparmor_parser" [ 85.655172] type=1400 audit(1360165610.397:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=7277 comm="apparmor_parser" [ 86.002232] type=1400 audit(1360165610.745:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=7279 comm="apparmor_parser" [ 95.278497] type=1400 audit(1360165620.021:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=7274 comm="apparmor_parser" [ 95.281411] type=1400 audit(1360165620.025:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=7274 comm="apparmor_parser" [ 95.282751] type=1400 audit(1360165620.025:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=7274 comm="apparmor_parser" [ 95.284725] type=1400 audit(1360165620.029:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=7274 comm="apparmor_parser" [ 95.285730] type=1400 audit(1360165620.029:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=7274 comm="apparmor_parser" [ 95.287257] type=1400 audit(1360165620.029:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=7274 comm="apparmor_parser" [ 95.476803] init: alsa-restore main process (7311) terminated with status 99 [ 355.616513] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 397.993974] wlan0: authenticate with 00:07:ab:03:77:1d [ 398.003160] wlan0: send auth to 00:07:ab:03:77:1d (try 1/3) [ 398.204071] wlan0: send auth to 00:07:ab:03:77:1d (try 2/3) [ 398.205575] wlan0: authenticated [ 398.212043] wlan0: associate with 00:07:ab:03:77:1d (try 1/3) [ 398.214018] wlan0: RX AssocResp from 00:07:ab:03:77:1d (capab=0x431 status=0 aid=1) [ 398.214426] wlan0: associated [ 398.214802] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 398.214929] cfg80211: Calling CRDA for country: US [ 398.358965] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 398.358971] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.358974] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 398.358977] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.358979] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 398.358982] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.358985] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 398.358987] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.358990] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 398.358992] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.358995] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 398.358997] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.359000] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 398.359002] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.359005] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 398.359007] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.359010] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 398.359012] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.359015] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 398.359017] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.359020] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 398.359022] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.359025] cfg80211: Disabling freq 2467 MHz [ 398.359026] cfg80211: Disabling freq 2472 MHz [ 398.359028] cfg80211: Disabling freq 2484 MHz [ 398.359035] ath: regdomain 0x8348 updated by CountryIE [ 398.359037] ath: EEPROM regdomain: 0x8348 [ 398.359038] ath: EEPROM indicates we should expect a country code [ 398.359041] ath: doing EEPROM country->regdmn map search [ 398.359043] ath: country maps to regdmn code: 0x3a [ 398.359045] ath: Country alpha2 being used: US [ 398.359047] ath: Regpair used: 0x3a [ 398.359049] cfg80211: Regulatory domain changed to country: US [ 398.359050] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 398.359053] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 398.359056] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 398.359058] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 398.359061] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 398.359064] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 398.359066] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 499.839993] cfg80211: All devices are disconnected, going to restore regulatory settings [ 499.840031] cfg80211: Restoring regulatory settings [ 499.840036] cfg80211: Calling CRDA to update world regulatory domain [ 499.847888] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 499.847897] cfg80211: World regulatory domain updated: [ 499.847900] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 499.847903] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 499.847906] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 499.847908] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 499.847911] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 499.847914] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 500.844780] wlan0: authenticate with 00:07:ab:03:77:1d [ 500.852731] wlan0: send auth to 00:07:ab:03:77:1d (try 1/3) [ 501.056040] wlan0: send auth to 00:07:ab:03:77:1d (try 2/3) [ 501.260066] wlan0: send auth to 00:07:ab:03:77:1d (try 3/3) [ 501.261509] wlan0: authenticated [ 501.268042] wlan0: associate with 00:07:ab:03:77:1d (try 1/3) [ 501.270101] wlan0: RX AssocResp from 00:07:ab:03:77:1d (capab=0x431 status=0 aid=1) [ 501.270496] wlan0: associated [ 501.270881] cfg80211: Calling CRDA for country: US [ 501.278791] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 501.278798] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278801] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 501.278804] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278807] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 501.278809] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278812] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 501.278814] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278818] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 501.278821] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278823] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 501.278826] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278828] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 501.278831] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278833] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 501.278836] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278838] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 501.278841] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278843] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 501.278846] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278849] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 501.278851] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278853] cfg80211: Disabling freq 2467 MHz [ 501.278855] cfg80211: Disabling freq 2472 MHz [ 501.278857] cfg80211: Disabling freq 2484 MHz [ 501.278864] ath: regdomain 0x8348 updated by CountryIE [ 501.278866] ath: EEPROM regdomain: 0x8348 [ 501.278868] ath: EEPROM indicates we should expect a country code [ 501.278870] ath: doing EEPROM country->regdmn map search [ 501.278873] ath: country maps to regdmn code: 0x3a [ 501.278874] ath: Country alpha2 being used: US [ 501.278876] ath: Regpair used: 0x3a [ 501.278878] cfg80211: Regulatory domain changed to country: US [ 501.278880] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 501.278883] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 501.278886] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 501.278889] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 501.278891] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 501.278894] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 501.278897] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 574.653441] gtk-window-deco[8198] general protection ip:7f5a66a39318 sp:7fffef4be900 error:0 in libglib-2.0.so.0.3400.0[7f5a66a02000+f5000] [ 825.900580] cfg80211: All devices are disconnected, going to restore regulatory settings [ 825.900592] cfg80211: Restoring regulatory settings [ 825.900597] cfg80211: Calling CRDA to update world regulatory domain [ 826.877638] wlan0: authenticate with 00:07:ab:03:77:1d [ 826.887324] wlan0: send auth to 00:07:ab:03:77:1d (try 1/3) [ 827.088099] wlan0: send auth to 00:07:ab:03:77:1d (try 2/3) [ 827.089552] wlan0: authenticated [ 827.096041] wlan0: associate with 00:07:ab:03:77:1d (try 1/3) [ 827.098001] wlan0: RX AssocResp from 00:07:ab:03:77:1d (capab=0x431 status=0 aid=1) [ 827.098472] wlan0: associated [ 827.098859] cfg80211: Pending regulatory request, waiting for it to be processed... [ 827.988544] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 827.988555] cfg80211: World regulatory domain updated: [ 827.988558] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 827.988561] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 827.988564] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 827.988566] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 827.988569] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 827.988572] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 827.988697] cfg80211: Calling CRDA for country: US [ 827.999837] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 827.999847] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999850] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 827.999853] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999855] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 827.999858] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999860] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 827.999863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999865] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 827.999868] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999871] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 827.999873] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999876] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 827.999878] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999881] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 827.999884] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999886] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 827.999889] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999892] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 827.999895] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999897] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 827.999900] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999902] cfg80211: Disabling freq 2467 MHz [ 827.999904] cfg80211: Disabling freq 2472 MHz [ 827.999906] cfg80211: Disabling freq 2484 MHz [ 827.999914] ath: regdomain 0x8348 updated by CountryIE [ 827.999916] ath: EEPROM regdomain: 0x8348 [ 827.999917] ath: EEPROM indicates we should expect a country code [ 827.999920] ath: doing EEPROM country->regdmn map search [ 827.999922] ath: country maps to regdmn code: 0x3a [ 827.999924] ath: Country alpha2 being used: US [ 827.999925] ath: Regpair used: 0x3a [ 827.999928] cfg80211: Regulatory domain changed to country: US [ 827.999929] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 827.999932] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 827.999935] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 827.999937] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 827.999940] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 827.999943] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 827.999945] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 868.897217] cfg80211: All devices are disconnected, going to restore regulatory settings [ 868.897228] cfg80211: Restoring regulatory settings [ 868.897233] cfg80211: Calling CRDA to update world regulatory domain [ 868.926810] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 868.926819] cfg80211: World regulatory domain updated: [ 868.926821] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 868.926824] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 868.926827] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 868.926830] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 868.926833] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 868.926835] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 869.881327] wlan0: authenticate with 00:07:ab:03:77:1d [ 869.889088] wlan0: send auth to 00:07:ab:03:77:1d (try 1/3) [ 870.092044] wlan0: send auth to 00:07:ab:03:77:1d (try 2/3) [ 870.093501] wlan0: authenticated [ 870.100039] wlan0: associate with 00:07:ab:03:77:1d (try 1/3) [ 870.102031] wlan0: RX AssocResp from 00:07:ab:03:77:1d (capab=0x431 status=0 aid=1) [ 870.102544] wlan0: associated [ 870.103027] cfg80211: Calling CRDA for country: US [ 870.117265] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 870.117271] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117274] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 870.117277] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117280] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 870.117282] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117285] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 870.117288] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117290] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 870.117293] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117295] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 870.117298] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117300] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 870.117303] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117305] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 870.117308] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117310] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 870.117313] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117315] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 870.117318] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117320] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 870.117323] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117326] cfg80211: Disabling freq 2467 MHz [ 870.117328] cfg80211: Disabling freq 2472 MHz [ 870.117329] cfg80211: Disabling freq 2484 MHz [ 870.117335] ath: regdomain 0x8348 updated by CountryIE [ 870.117337] ath: EEPROM regdomain: 0x8348 [ 870.117339] ath: EEPROM indicates we should expect a country code [ 870.117341] ath: doing EEPROM country->regdmn map search [ 870.117344] ath: country maps to regdmn code: 0x3a [ 870.117345] ath: Country alpha2 being used: US [ 870.117347] ath: Regpair used: 0x3a [ 870.117350] cfg80211: Regulatory domain changed to country: US [ 870.117351] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 870.117354] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 870.117357] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 870.117360] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 870.117362] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 870.117365] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 870.117368] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1108.844184] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1108.844194] cfg80211: Restoring regulatory settings [ 1108.844218] cfg80211: Calling CRDA to update world regulatory domain [ 1109.126663] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1109.126672] cfg80211: World regulatory domain updated: [ 1109.126674] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1109.126677] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1109.126680] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1109.126682] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1109.126685] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1109.126688] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1109.856714] wlan0: authenticate with 00:07:ab:03:77:1d [ 1109.866589] wlan0: send auth to 00:07:ab:03:77:1d (try 1/3) [ 1110.068067] wlan0: send auth to 00:07:ab:03:77:1d (try 2/3) [ 1110.069593] wlan0: authenticated [ 1110.076035] wlan0: associate with 00:07:ab:03:77:1d (try 1/3) [ 1110.078048] wlan0: RX AssocResp from 00:07:ab:03:77:1d (capab=0x431 status=0 aid=1) [ 1110.078463] wlan0: associated [ 1110.078925] cfg80211: Calling CRDA for country: US [ 1110.088228] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088236] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088239] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088242] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088244] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088247] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088249] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088252] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088255] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088257] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088260] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088263] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088265] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088268] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088270] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088273] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088275] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088278] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088281] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088283] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088286] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 1110.088289] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088291] cfg80211: Disabling freq 2467 MHz [ 1110.088293] cfg80211: Disabling freq 2472 MHz [ 1110.088294] cfg80211: Disabling freq 2484 MHz [ 1110.088300] ath: regdomain 0x8348 updated by CountryIE [ 1110.088302] ath: EEPROM regdomain: 0x8348 [ 1110.088304] ath: EEPROM indicates we should expect a country code [ 1110.088306] ath: doing EEPROM country->regdmn map search [ 1110.088308] ath: country maps to regdmn code: 0x3a [ 1110.088310] ath: Country alpha2 being used: US [ 1110.088312] ath: Regpair used: 0x3a [ 1110.088314] cfg80211: Regulatory domain changed to country: US [ 1110.088316] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1110.088319] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1110.088321] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1110.088324] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1110.088326] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1110.088329] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1110.088331] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1174.311369] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen [ 1174.311378] ata1.00: irq_stat 0x00400040, connection status changed [ 1174.311382] ata1: SError: { PHYRdyChg DevExch } [ 1174.311385] ata1.00: failed command: FLUSH CACHE EXT [ 1174.311392] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 1174.311392] res 40/00:5c:48:28:42/00:00:11:00:00/40 Emask 0x10 (ATA bus error) [ 1174.311395] ata1.00: status: { DRDY } [ 1174.311404] ata1: hard resetting link [ 1177.644075] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1177.647106] ata1.00: configured for UDMA/100 [ 1177.647113] ata1.00: retrying FLUSH 0xea Emask 0x10 [ 1177.660099] ata1: EH complete