[ 0.000000] Linux version 5.3.0-19-generic (buildd@lgw01-amd64-053) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #20-Ubuntu SMP Fri Oct 18 09:04:39 UTC 2019 (Ubuntu 5.3.0-19.20-generic 5.3.1) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-19-generic root=UUID=ff84e034-43ff-4c6f-914b-42dcdd53cf31 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009c00000-0x000000000a10ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a110000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20a000-0x00000000bb57efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bb57f000-0x00000000bb77efff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bb77f000-0x00000000bd77efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd77f000-0x00000000bf77efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf77f000-0x00000000bf7fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f33ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.60 by INSYDE Corp. [ 0.000000] efi: ESRT=0xbc494b98 ACPI=0xbf7fe000 ACPI 2.0=0xbf7fe014 SMBIOS=0xbc492000 SMBIOS 3.0=0xbc490000 MEMATTR=0xb8f27018 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: HP HP Laptop 15-db0xxx/84AE, BIOS F.02 04/06/2018 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2495.570 MHz processor [ 0.008805] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.008806] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008811] last_pfn = 0x22f340 max_arch_pfn = 0x400000000 [ 0.008816] MTRR default type: uncachable [ 0.008816] MTRR fixed ranges enabled: [ 0.008817] 00000-9FFFF write-back [ 0.008818] A0000-BFFFF uncachable [ 0.008819] C0000-DFFFF write-through [ 0.008819] E0000-FFFFF uncachable [ 0.008820] MTRR variable ranges enabled: [ 0.008821] 0 base 000000000000 mask FFFF80000000 write-back [ 0.008822] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.008823] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.008823] 3 base 0000FF000000 mask FFFFFF000000 write-protect [ 0.008824] 4 disabled [ 0.008824] 5 disabled [ 0.008824] 6 disabled [ 0.008825] 7 disabled [ 0.008826] TOM2: 0000000230000000 aka 8960M [ 0.009166] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.009263] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.013820] esrt: Reserving ESRT space from 0x00000000bc494b98 to 0x00000000bc494bd0. [ 0.013829] check: Scanning 1 areas for low memory corruption [ 0.013839] Using GB pages for direct mapping [ 0.013841] BRK [0x1dbc01000, 0x1dbc01fff] PGTABLE [ 0.013842] BRK [0x1dbc02000, 0x1dbc02fff] PGTABLE [ 0.013843] BRK [0x1dbc03000, 0x1dbc03fff] PGTABLE [ 0.013870] BRK [0x1dbc04000, 0x1dbc04fff] PGTABLE [ 0.013871] BRK [0x1dbc05000, 0x1dbc05fff] PGTABLE [ 0.013972] BRK [0x1dbc06000, 0x1dbc06fff] PGTABLE [ 0.013992] BRK [0x1dbc07000, 0x1dbc07fff] PGTABLE [ 0.014033] BRK [0x1dbc08000, 0x1dbc08fff] PGTABLE [ 0.014050] BRK [0x1dbc09000, 0x1dbc09fff] PGTABLE [ 0.014073] BRK [0x1dbc0a000, 0x1dbc0afff] PGTABLE [ 0.014096] BRK [0x1dbc0b000, 0x1dbc0bfff] PGTABLE [ 0.014131] RAMDISK: [mem 0x2e695000-0x33341fff] [ 0.014144] ACPI: Early table checksum verification disabled [ 0.014147] ACPI: RSDP 0x00000000BF7FE014 000024 (v02 HPQOEM) [ 0.014150] ACPI: XSDT 0x00000000BF7D3188 0000EC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013) [ 0.014155] ACPI: FACP 0x00000000BF7F0000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.014160] ACPI: DSDT 0x00000000BF7E3000 0082A7 (v01 HPQOEM 84AE 00040000 ACPI 00040000) [ 0.014162] ACPI: FACS 0x00000000BF358000 000040 [ 0.014164] ACPI: SSDT 0x00000000BF7F8000 005367 (v02 HPQOEM 84AE 00000002 ACPI 00040000) [ 0.014167] ACPI: UEFI 0x00000000BF7F7000 000236 (v01 HPQOEM 84AE 00000001 HP 00040000) [ 0.014169] ACPI: SSDT 0x00000000BF7F5000 0008E0 (v01 HPQOEM 84AE 00000001 ACPI 00040000) [ 0.014171] ACPI: CRAT 0x00000000BF7F4000 000490 (v01 HPQOEM 84AE 00000001 HP 00040000) [ 0.014174] ACPI: CDIT 0x00000000BF7F3000 000029 (v01 HPQOEM 84AE 00000001 HP 00040000) [ 0.014176] ACPI: ASF! 0x00000000BF7F2000 0000A5 (v32 HPQOEM 84AE 00000001 HP 00040000) [ 0.014178] ACPI: BOOT 0x00000000BF7F1000 000028 (v01 HPQOEM 84AE 00000001 HP 00040000) [ 0.014180] ACPI: HPET 0x00000000BF7EF000 000038 (v01 HPQOEM 84AE 00000001 HP 00040000) [ 0.014182] ACPI: APIC 0x00000000BF7EE000 000138 (v03 HPQOEM 84AE 00000001 HP 00040000) [ 0.014185] ACPI: MCFG 0x00000000BF7ED000 00003C (v01 HPQOEM 84AE 00000001 HP 00040000) [ 0.014187] ACPI: WSMT 0x00000000BF7EC000 000028 (v01 HPQOEM 84AE 00000001 HP 00040000) [ 0.014189] ACPI: UEFI 0x00000000BF7E2000 000042 (v01 HPQOEM 84AE 00000000 HP 00040000) [ 0.014191] ACPI: IHIS 0x00000000BF7E1000 000038 (v01 HPQOEM 84AE 00000001 HP 00040000) [ 0.014193] ACPI: SSDT 0x00000000BF7E0000 00013D (v01 HPQOEM 84AE 00001000 ACPI 00040000) [ 0.014195] ACPI: SSDT 0x00000000BF7D9000 0069B3 (v01 HPQOEM 84AE 00001000 ACPI 00040000) [ 0.014198] ACPI: IVRS 0x00000000BF7D8000 0000D0 (v02 HPQOEM 84AE 00000001 HP 00040000) [ 0.014200] ACPI: SSDT 0x00000000BF7D7000 0001D4 (v01 HPQOEM 84AE 00000001 ACPI 00040000) [ 0.014202] ACPI: SSDT 0x00000000BF7D6000 0005C1 (v01 HPQOEM 84AE 00000001 ACPI 00040000) [ 0.014204] ACPI: SSDT 0x00000000BF7D4000 00172E (v01 HPQOEM 84AE 00000001 ACPI 00040000) [ 0.014206] ACPI: SSDT 0x00000000BF7D2000 000850 (v01 HPQOEM 84AE 00000001 ACPI 00040000) [ 0.014208] ACPI: SSDT 0x00000000BF7D0000 0019E6 (v01 HPQOEM 84AE 00000001 ACPI 00040000) [ 0.014211] ACPI: FPDT 0x00000000BF7CF000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.014213] ACPI: SSDT 0x00000000BF7CC000 001CC9 (v01 HPQOEM 84AE 00000001 ACPI 00040000) [ 0.014215] ACPI: BGRT 0x00000000BF7CE000 000038 (v01 HPQOEM 84AE 00000001 HP 00040000) [ 0.014221] ACPI: Local APIC address 0xfee00000 [ 0.014386] No NUMA configuration found [ 0.014386] Faking a node at [mem 0x0000000000000000-0x000000022f33ffff] [ 0.014395] NODE_DATA(0) allocated [mem 0x22f315000-0x22f33ffff] [ 0.014579] Zone ranges: [ 0.014580] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.014581] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.014582] Normal [mem 0x0000000100000000-0x000000022f33ffff] [ 0.014583] Device empty [ 0.014583] Movable zone start for each node [ 0.014586] Early memory node ranges [ 0.014586] node 0: [mem 0x0000000000001000-0x0000000000087fff] [ 0.014587] node 0: [mem 0x0000000000100000-0x0000000009bfffff] [ 0.014588] node 0: [mem 0x000000000a110000-0x000000000a1fffff] [ 0.014588] node 0: [mem 0x000000000a20a000-0x00000000bb57efff] [ 0.014589] node 0: [mem 0x00000000bf7ff000-0x00000000bf7fffff] [ 0.014589] node 0: [mem 0x0000000100000000-0x000000022f33ffff] [ 0.014703] Zeroed struct page in unavailable ranges: 20499 pages [ 0.014704] Initmem setup node 0 [mem 0x0000000000001000-0x000000022f33ffff] [ 0.014705] On node 0 totalpages: 2007853 [ 0.014706] DMA zone: 64 pages used for memmap [ 0.014707] DMA zone: 1135 pages reserved [ 0.014707] DMA zone: 3975 pages, LIFO batch:0 [ 0.014751] DMA32 zone: 11906 pages used for memmap [ 0.014752] DMA32 zone: 761958 pages, LIFO batch:63 [ 0.024461] Normal zone: 19405 pages used for memmap [ 0.024463] Normal zone: 1241920 pages, LIFO batch:63 [ 0.038641] ACPI: PM-Timer IO Port: 0x408 [ 0.038643] ACPI: Local APIC address 0xfee00000 [ 0.038650] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.038651] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.038651] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.038652] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.038652] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.038653] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.038653] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.038653] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.038654] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.038654] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.038655] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.038655] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.038655] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.038656] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.038656] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.038657] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.038685] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.038696] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.038698] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.038699] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.038700] ACPI: IRQ0 used by override. [ 0.038701] ACPI: IRQ9 used by override. [ 0.038702] Using ACPI (MADT) for SMP configuration information [ 0.038704] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.038712] smpboot: Allowing 16 CPUs, 12 hotplug CPUs [ 0.038730] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.038732] PM: Registered nosave memory: [mem 0x00088000-0x000bffff] [ 0.038732] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.038733] PM: Registered nosave memory: [mem 0x09c00000-0x0a10ffff] [ 0.038734] PM: Registered nosave memory: [mem 0x0a200000-0x0a209fff] [ 0.038735] PM: Registered nosave memory: [mem 0xbb57f000-0xbb77efff] [ 0.038736] PM: Registered nosave memory: [mem 0xbb77f000-0xbd77efff] [ 0.038736] PM: Registered nosave memory: [mem 0xbd77f000-0xbf77efff] [ 0.038737] PM: Registered nosave memory: [mem 0xbf77f000-0xbf7fefff] [ 0.038738] PM: Registered nosave memory: [mem 0xbf800000-0xcfffffff] [ 0.038738] PM: Registered nosave memory: [mem 0xd0000000-0xefffffff] [ 0.038739] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.038739] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.038739] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.038740] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.038740] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.038741] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] [ 0.038741] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.038741] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff] [ 0.038742] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.038742] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.038742] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.038744] [mem 0xd0000000-0xefffffff] available for PCI devices [ 0.038745] Booting paravirtualized kernel on bare hardware [ 0.038750] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.038756] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.039546] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 0.039554] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 [ 0.039555] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.039583] Built 1 zonelists, mobility grouping on. Total pages: 1975343 [ 0.039583] Policy zone: Normal [ 0.039585] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-19-generic root=UUID=ff84e034-43ff-4c6f-914b-42dcdd53cf31 ro quiet splash vt.handoff=7 [ 0.040668] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.041148] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.041191] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.048200] Calgary: detecting Calgary via BIOS EBDA area [ 0.048202] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.065960] Memory: 7658904K/8031412K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 372508K reserved, 0K cma-reserved) [ 0.067142] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.067203] ftrace: allocating 43189 entries in 169 pages [ 0.080777] rcu: Hierarchical RCU implementation. [ 0.080779] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.080779] Tasks RCU enabled. [ 0.080780] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.080781] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.083374] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16 [ 0.085422] random: crng done (trusting CPU's manufacturer) [ 0.085470] vt handoff: transparent VT on vt#7 [ 0.085473] Console: colour dummy device 80x25 [ 0.085477] printk: console [tty0] enabled [ 0.085523] ACPI: Core revision 20190703 [ 0.085840] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.085893] APIC: Switch to symmetric I/O mode setup [ 0.086817] AMD-Vi: [Firmware Bug]: : IOAPIC[4] not in IVRS table [ 0.086819] AMD-Vi: [Firmware Bug]: : IOAPIC[5] not in IVRS table [ 0.086820] AMD-Vi: [Firmware Bug]: : No southbridge IOAPIC found [ 0.086820] AMD-Vi: Disabling interrupt remapping [ 0.086826] Switched APIC routing to physical flat. [ 0.088185] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.105896] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f8e126d2b, max_idle_ns: 440795320265 ns [ 0.105903] Calibrating delay loop (skipped), value calculated using timer frequency.. 4991.14 BogoMIPS (lpj=9982280) [ 0.105905] pid_max: default: 32768 minimum: 301 [ 0.110203] LSM: Security Framework initializing [ 0.110248] Yama: becoming mindful. [ 0.110388] AppArmor: AppArmor initialized [ 0.110549] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.110558] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.110916] *** VALIDATE proc *** [ 0.110976] *** VALIDATE cgroup1 *** [ 0.110977] *** VALIDATE cgroup2 *** [ 0.111211] LVT offset 1 assigned for vector 0xf9 [ 0.111260] LVT offset 2 assigned for vector 0xf4 [ 0.111274] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.111275] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.111278] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.111279] Spectre V2 : Mitigation: Full AMD retpoline [ 0.111280] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.111281] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.111281] Spectre V2 : User space: Vulnerable [ 0.111282] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.111492] Freeing SMP alternatives memory: 36K [ 0.227751] smpboot: CPU0: AMD Ryzen 3 2200U with Radeon Vega Mobile Gfx (family: 0x17, model: 0x11, stepping: 0x0) [ 0.228247] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.228253] ... version: 0 [ 0.228253] ... bit width: 48 [ 0.228254] ... generic registers: 6 [ 0.228254] ... value mask: 0000ffffffffffff [ 0.228254] ... max period: 00007fffffffffff [ 0.228255] ... fixed-purpose events: 0 [ 0.228255] ... event mask: 000000000000003f [ 0.228319] rcu: Hierarchical SRCU implementation. [ 0.229071] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.229460] smp: Bringing up secondary CPUs ... [ 0.229673] x86: Booting SMP configuration: [ 0.229673] .... node #0, CPUs: #1 #2 #3 [ 0.233961] smp: Brought up 1 node, 4 CPUs [ 0.233961] smpboot: Max logical packages: 4 [ 0.233961] smpboot: Total of 4 processors activated (19964.56 BogoMIPS) [ 0.234499] devtmpfs: initialized [ 0.234499] x86/mm: Memory block size: 128MB [ 0.234843] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes) [ 0.234843] PM: Registering ACPI NVS region [mem 0xbd77f000-0xbf77efff] (33554432 bytes) [ 0.238759] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.238759] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.238764] pinctrl core: initialized pinctrl subsystem [ 0.238764] PM: RTC time: 18:01:27, date: 2019-11-03 [ 0.239242] NET: Registered protocol family 16 [ 0.239339] audit: initializing netlink subsys (disabled) [ 0.239343] audit: type=2000 audit(1572804087.152:1): state=initialized audit_enabled=0 res=1 [ 0.239343] EISA bus registered [ 0.239343] cpuidle: using governor ladder [ 0.239343] cpuidle: using governor menu [ 0.239343] Simple Boot Flag at 0x44 set to 0x1 [ 0.239343] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.239343] ACPI: bus type PCI registered [ 0.239343] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.239343] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.239343] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.239343] PCI: Using configuration type 1 for base access [ 0.242651] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.242651] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.246087] ACPI: Added _OSI(Module Device) [ 0.246087] ACPI: Added _OSI(Processor Device) [ 0.246087] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.246087] ACPI: Added _OSI(Processor Aggregator Device) [ 0.246087] ACPI: Added _OSI(Linux-Dell-Video) [ 0.246087] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.246087] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.249976] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.262426] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.266430] ACPI: EC: EC started [ 0.266431] ACPI: EC: interrupt blocked [ 0.266648] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.266649] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.266650] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions [ 0.266650] ACPI: Interpreter enabled [ 0.266667] ACPI: (supports S0 S3 S4 S5) [ 0.266668] ACPI: Using IOAPIC for interrupt routing [ 0.267039] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.267432] ACPI: Enabled 3 GPEs in block 00 to 1F [ 0.269780] ACPI: Power Resource [P0ST] (on) [ 0.269808] ACPI: Power Resource [P3ST] (on) [ 0.272896] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20190703/psargs-330) [ 0.272903] Initialized Local Variables for Method [_STA]: [ 0.272904] Local0: 00000000f108d717 Integer 0000000000000000 [ 0.272907] No Arguments are initialized for method [_STA] [ 0.272909] ACPI Error: Aborting method \_SB.WLBU._STA due to previous error (AE_NOT_FOUND) (20190703/psparse-529) [ 0.276922] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.276927] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.277093] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.277250] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.277251] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.277262] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 0.277374] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cd3ff]) [ 0.277513] PCI host bridge to bus 0000:00 [ 0.277514] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.277515] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.277516] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.277517] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.277518] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.277519] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.277519] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.277520] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.277521] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.277522] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.277522] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.277523] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.277524] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.277525] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.277525] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff window] [ 0.277526] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfed3ffff window] [ 0.277527] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.277537] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 [ 0.277668] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 [ 0.277831] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.277942] pci 0000:00:01.1: [1022:15d3] type 01 class 0x060400 [ 0.278087] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.278202] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 [ 0.278327] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.278448] pci 0000:00:01.3: [1022:15d3] type 01 class 0x060400 [ 0.278573] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.278702] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.278810] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 [ 0.278868] pci 0000:00:08.1: enabling Extended Tags [ 0.278926] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.279018] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 [ 0.279076] pci 0000:00:08.2: enabling Extended Tags [ 0.279133] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.279253] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.279486] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.279705] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 [ 0.279756] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 [ 0.279807] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 [ 0.279858] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 [ 0.279908] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 [ 0.279966] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 [ 0.280017] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 [ 0.280078] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 [ 0.280221] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.280299] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.280336] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.280368] pci 0000:02:00.0: reg 0x18: [mem 0xe0804000-0xe0804fff 64bit] [ 0.280387] pci 0000:02:00.0: reg 0x20: [mem 0xe0800000-0xe0803fff 64bit] [ 0.280510] pci 0000:02:00.0: supports D1 D2 [ 0.280511] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.280701] pci 0000:00:01.2: PCI bridge to [bus 02] [ 0.280706] pci 0000:00:01.2: bridge window [io 0x3000-0x3fff] [ 0.280709] pci 0000:00:01.2: bridge window [mem 0xe0800000-0xe08fffff] [ 0.280783] pci 0000:03:00.0: [10ec:d723] type 00 class 0x028000 [ 0.280825] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.280861] pci 0000:03:00.0: reg 0x18: [mem 0xe0700000-0xe070ffff 64bit] [ 0.281020] pci 0000:03:00.0: supports D1 D2 [ 0.281021] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.281210] pci 0000:00:01.3: PCI bridge to [bus 03] [ 0.281215] pci 0000:00:01.3: bridge window [io 0x2000-0x2fff] [ 0.281218] pci 0000:00:01.3: bridge window [mem 0xe0700000-0xe07fffff] [ 0.281324] pci 0000:04:00.0: [1002:15dd] type 00 class 0x030000 [ 0.281368] pci 0000:04:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.281386] pci 0000:04:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] [ 0.281397] pci 0000:04:00.0: reg 0x20: [io 0x1000-0x10ff] [ 0.281409] pci 0000:04:00.0: reg 0x24: [mem 0xe0600000-0xe067ffff] [ 0.281429] pci 0000:04:00.0: enabling Extended Tags [ 0.281443] pci 0000:04:00.0: BAR 0: assigned to efifb [ 0.281542] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.281671] pci 0000:04:00.1: [1002:15de] type 00 class 0x040300 [ 0.281700] pci 0000:04:00.1: reg 0x10: [mem 0xe06c8000-0xe06cbfff] [ 0.281771] pci 0000:04:00.1: enabling Extended Tags [ 0.281842] pci 0000:04:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.281923] pci 0000:04:00.2: [1022:15df] type 00 class 0x108000 [ 0.281972] pci 0000:04:00.2: reg 0x18: [mem 0xe0500000-0xe05fffff] [ 0.282004] pci 0000:04:00.2: reg 0x24: [mem 0xe06cc000-0xe06cdfff] [ 0.282024] pci 0000:04:00.2: enabling Extended Tags [ 0.282172] pci 0000:04:00.3: [1022:15e0] type 00 class 0x0c0330 [ 0.282207] pci 0000:04:00.3: reg 0x10: [mem 0xe0400000-0xe04fffff 64bit] [ 0.282268] pci 0000:04:00.3: enabling Extended Tags [ 0.282345] pci 0000:04:00.3: PME# supported from D0 D3hot D3cold [ 0.282430] pci 0000:04:00.4: [1022:15e1] type 00 class 0x0c0330 [ 0.282464] pci 0000:04:00.4: reg 0x10: [mem 0xe0300000-0xe03fffff 64bit] [ 0.282525] pci 0000:04:00.4: enabling Extended Tags [ 0.282602] pci 0000:04:00.4: PME# supported from D0 D3hot D3cold [ 0.282689] pci 0000:04:00.5: [1022:15e2] type 00 class 0x048000 [ 0.282718] pci 0000:04:00.5: reg 0x10: [mem 0xe0680000-0xe06bffff] [ 0.282790] pci 0000:04:00.5: enabling Extended Tags [ 0.282860] pci 0000:04:00.5: PME# supported from D0 D3hot D3cold [ 0.282941] pci 0000:04:00.6: [1022:15e3] type 00 class 0x040300 [ 0.282970] pci 0000:04:00.6: reg 0x10: [mem 0xe06c0000-0xe06c7fff] [ 0.283041] pci 0000:04:00.6: enabling Extended Tags [ 0.283111] pci 0000:04:00.6: PME# supported from D0 D3hot D3cold [ 0.283255] pci 0000:00:08.1: PCI bridge to [bus 04] [ 0.283261] pci 0000:00:08.1: bridge window [io 0x1000-0x1fff] [ 0.283264] pci 0000:00:08.1: bridge window [mem 0xe0300000-0xe06fffff] [ 0.283269] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.283337] pci 0000:05:00.0: [1022:7901] type 00 class 0x010601 [ 0.283420] pci 0000:05:00.0: reg 0x24: [mem 0xe0200000-0xe02007ff] [ 0.283439] pci 0000:05:00.0: enabling Extended Tags [ 0.283517] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.283768] pci 0000:00:08.2: PCI bridge to [bus 05] [ 0.283776] pci 0000:00:08.2: bridge window [mem 0xe0200000-0xe02fffff] [ 0.346334] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled. [ 0.346516] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled. [ 0.346653] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled. [ 0.346823] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled. [ 0.346980] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled. [ 0.347109] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled. [ 0.347240] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled. [ 0.347360] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled. [ 0.347465] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20190703/psargs-330) [ 0.347472] Initialized Local Variables for Method [_STA]: [ 0.347473] Local0: 000000004ea10f4c Integer 0000000000000000 [ 0.347476] No Arguments are initialized for method [_STA] [ 0.347478] ACPI Error: Aborting method \_SB.WLBU._STA due to previous error (AE_NOT_FOUND) (20190703/psparse-529) [ 0.348029] ACPI: EC: interrupt unblocked [ 0.348048] ACPI: EC: event unblocked [ 0.348056] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.348057] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions and events [ 0.348126] SCSI subsystem initialized [ 0.348126] libata version 3.00 loaded. [ 0.348126] pci 0000:04:00.0: vgaarb: setting as boot VGA device [ 0.348126] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.348126] pci 0000:04:00.0: vgaarb: bridge control possible [ 0.348126] vgaarb: loaded [ 0.348126] ACPI: bus type USB registered [ 0.348126] usbcore: registered new interface driver usbfs [ 0.348126] usbcore: registered new interface driver hub [ 0.348126] usbcore: registered new device driver usb [ 0.348126] pps_core: LinuxPPS API ver. 1 registered [ 0.348126] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.348126] PTP clock support registered [ 0.348126] EDAC MC: Ver: 3.0.0 [ 0.348126] Registered efivars operations [ 0.630415] PCI: Using ACPI for IRQ routing [ 0.638317] PCI: pci_cache_line_size set to 64 bytes [ 0.638396] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 0.638398] e820: reserve RAM buffer [mem 0x09c00000-0x0bffffff] [ 0.638398] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.638399] e820: reserve RAM buffer [mem 0xbb57f000-0xbbffffff] [ 0.638399] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.638400] e820: reserve RAM buffer [mem 0x22f340000-0x22fffffff] [ 0.638535] NetLabel: Initializing [ 0.638536] NetLabel: domain hash size = 128 [ 0.638536] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.638551] NetLabel: unlabeled traffic allowed by default [ 0.638570] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.638570] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.640043] clocksource: Switched to clocksource tsc-early [ 0.654959] VFS: Disk quotas dquot_6.6.0 [ 0.655004] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.655061] *** VALIDATE hugetlbfs *** [ 0.655178] AppArmor: AppArmor Filesystem Enabled [ 0.655212] pnp: PnP ACPI init [ 0.655484] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 0.655487] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.655488] system 00:00: [mem 0xfda00000-0xfdafffff] has been reserved [ 0.655493] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.656412] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.656438] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.656465] pnp 00:03: Plug and Play ACPI device, IDs SYN327b PNP0f13 (active) [ 0.656513] system 00:04: [io 0x0400-0x04cf] has been reserved [ 0.656514] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.656516] system 00:04: [io 0x04d6] has been reserved [ 0.656517] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.656518] system 00:04: [io 0x0c14] has been reserved [ 0.656519] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.656520] system 00:04: [io 0x0c6c] has been reserved [ 0.656522] system 00:04: [io 0x0c6f] has been reserved [ 0.656523] system 00:04: [io 0x0cd0-0x0cdb] has been reserved [ 0.656526] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.656608] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.656610] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.656613] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.722473] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20190703/psargs-330) [ 0.722484] Initialized Local Variables for Method [_STA]: [ 0.722485] Local0: 0000000098efdd28 Integer 0000000000000000 [ 0.722491] No Arguments are initialized for method [_STA] [ 0.722493] ACPI Error: Aborting method \_SB.WLBU._STA due to previous error (AE_NOT_FOUND) (20190703/psparse-529) [ 0.722842] pnp: PnP ACPI: found 6 devices [ 0.728548] thermal_sys: Registered thermal governor 'fair_share' [ 0.728549] thermal_sys: Registered thermal governor 'bang_bang' [ 0.728550] thermal_sys: Registered thermal governor 'step_wise' [ 0.728550] thermal_sys: Registered thermal governor 'user_space' [ 0.728551] thermal_sys: Registered thermal governor 'power_allocator' [ 0.733124] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.733157] pci 0000:00:01.1: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.733159] pci 0000:00:01.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.733161] pci 0000:00:01.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.733171] pci 0000:00:01.1: BAR 14: assigned [mem 0xe0900000-0xe0afffff] [ 0.733179] pci 0000:00:01.1: BAR 15: assigned [mem 0xe0b00000-0xe0cfffff 64bit pref] [ 0.733181] pci 0000:00:01.1: BAR 13: assigned [io 0x4000-0x4fff] [ 0.733183] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.733186] pci 0000:00:01.1: bridge window [io 0x4000-0x4fff] [ 0.733191] pci 0000:00:01.1: bridge window [mem 0xe0900000-0xe0afffff] [ 0.733195] pci 0000:00:01.1: bridge window [mem 0xe0b00000-0xe0cfffff 64bit pref] [ 0.733201] pci 0000:00:01.2: PCI bridge to [bus 02] [ 0.733203] pci 0000:00:01.2: bridge window [io 0x3000-0x3fff] [ 0.733208] pci 0000:00:01.2: bridge window [mem 0xe0800000-0xe08fffff] [ 0.733217] pci 0000:00:01.3: PCI bridge to [bus 03] [ 0.733219] pci 0000:00:01.3: bridge window [io 0x2000-0x2fff] [ 0.733224] pci 0000:00:01.3: bridge window [mem 0xe0700000-0xe07fffff] [ 0.733234] pci 0000:00:08.1: PCI bridge to [bus 04] [ 0.733236] pci 0000:00:08.1: bridge window [io 0x1000-0x1fff] [ 0.733241] pci 0000:00:08.1: bridge window [mem 0xe0300000-0xe06fffff] [ 0.733244] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.733251] pci 0000:00:08.2: PCI bridge to [bus 05] [ 0.733255] pci 0000:00:08.2: bridge window [mem 0xe0200000-0xe02fffff] [ 0.733265] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.733267] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.733268] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.733269] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.733270] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.733271] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.733272] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] [ 0.733273] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] [ 0.733274] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] [ 0.733275] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] [ 0.733276] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] [ 0.733277] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] [ 0.733278] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] [ 0.733279] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] [ 0.733280] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xefffffff window] [ 0.733281] pci_bus 0000:00: resource 19 [mem 0xf8000000-0xfed3ffff window] [ 0.733282] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.733283] pci_bus 0000:01: resource 1 [mem 0xe0900000-0xe0afffff] [ 0.733284] pci_bus 0000:01: resource 2 [mem 0xe0b00000-0xe0cfffff 64bit pref] [ 0.733285] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.733285] pci_bus 0000:02: resource 1 [mem 0xe0800000-0xe08fffff] [ 0.733287] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.733288] pci_bus 0000:03: resource 1 [mem 0xe0700000-0xe07fffff] [ 0.733289] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.733290] pci_bus 0000:04: resource 1 [mem 0xe0300000-0xe06fffff] [ 0.733291] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.733292] pci_bus 0000:05: resource 1 [mem 0xe0200000-0xe02fffff] [ 0.733508] NET: Registered protocol family 2 [ 0.733712] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.733770] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.733974] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.734083] TCP: Hash tables configured (established 65536 bind 65536) [ 0.734133] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.734158] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.734356] NET: Registered protocol family 1 [ 0.734361] NET: Registered protocol family 44 [ 0.734421] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.734429] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0 [ 0.781059] pci 0000:04:00.4: quirk_usb_early_handoff+0x0/0x662 took 41741 usecs [ 0.781074] PCI: CLS 64 bytes, default 64 [ 0.781115] Trying to unpack rootfs image as initramfs... [ 0.950720] Freeing initrd memory: 78516K [ 1.269642] pci 0000:00:00.2: AMD-Vi: Unable to write to IOMMU perf counter. [ 1.269753] pci 0000:00:00.2: can't derive routing for PCI INT A [ 1.269754] pci 0000:00:00.2: PCI INT A: not connected [ 1.270263] pci 0000:00:01.0: Adding to iommu group 0 [ 1.270471] pci 0000:00:01.1: Adding to iommu group 1 [ 1.270723] pci 0000:00:01.2: Adding to iommu group 2 [ 1.270922] pci 0000:00:01.3: Adding to iommu group 3 [ 1.271166] pci 0000:00:08.0: Adding to iommu group 4 [ 1.271193] pci 0000:00:08.1: Adding to iommu group 4 [ 1.271219] pci 0000:00:08.2: Adding to iommu group 4 [ 1.271445] pci 0000:00:14.0: Adding to iommu group 5 [ 1.271468] pci 0000:00:14.3: Adding to iommu group 5 [ 1.271674] pci 0000:00:18.0: Adding to iommu group 6 [ 1.271697] pci 0000:00:18.1: Adding to iommu group 6 [ 1.271718] pci 0000:00:18.2: Adding to iommu group 6 [ 1.271740] pci 0000:00:18.3: Adding to iommu group 6 [ 1.271762] pci 0000:00:18.4: Adding to iommu group 6 [ 1.271784] pci 0000:00:18.5: Adding to iommu group 6 [ 1.271805] pci 0000:00:18.6: Adding to iommu group 6 [ 1.271835] pci 0000:00:18.7: Adding to iommu group 6 [ 1.272070] pci 0000:02:00.0: Adding to iommu group 7 [ 1.272267] pci 0000:03:00.0: Adding to iommu group 8 [ 1.272354] pci 0000:04:00.0: Adding to iommu group 4 [ 1.272420] pci 0000:04:00.1: Adding to iommu group 4 [ 1.272486] pci 0000:04:00.2: Adding to iommu group 4 [ 1.272559] pci 0000:04:00.3: Adding to iommu group 4 [ 1.272626] pci 0000:04:00.4: Adding to iommu group 4 [ 1.272691] pci 0000:04:00.5: Adding to iommu group 4 [ 1.272757] pci 0000:04:00.6: Adding to iommu group 4 [ 1.272825] pci 0000:05:00.0: Adding to iommu group 4 [ 1.273139] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 1.273140] pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada): [ 1.273141] PPR NX GT IA GA PC GA_vAPIC [ 1.367603] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.368501] amd_uncore: AMD NB counters detected [ 1.368506] amd_uncore: AMD LLC counters detected [ 1.368672] check: Scanning for low memory corruption every 60 seconds [ 1.371080] Initialise system trusted keyrings [ 1.371188] Key type blacklist registered [ 1.371305] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.373637] zbud: loaded [ 1.374405] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.374852] fuse: init (API version 7.31) [ 1.375166] Platform Keyring initialized [ 1.380263] Key type asymmetric registered [ 1.380264] Asymmetric key parser 'x509' registered [ 1.380274] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.380363] io scheduler mq-deadline registered [ 1.381356] pcieport 0000:00:01.1: PME: Signaling with IRQ 26 [ 1.381452] pcieport 0000:00:01.1: AER: enabled with IRQ 26 [ 1.381505] pcieport 0000:00:01.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+ [ 1.381801] pcieport 0000:00:01.2: PME: Signaling with IRQ 27 [ 1.381920] pcieport 0000:00:01.2: AER: enabled with IRQ 27 [ 1.382103] pcieport 0000:00:01.3: PME: Signaling with IRQ 28 [ 1.382207] pcieport 0000:00:01.3: AER: enabled with IRQ 28 [ 1.382395] pcieport 0000:00:08.1: PME: Signaling with IRQ 29 [ 1.382623] pcieport 0000:00:08.2: PME: Signaling with IRQ 30 [ 1.382711] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.382786] efifb: probing for efifb [ 1.382813] efifb: framebuffer at 0xd0000000, using 4224k, total 4224k [ 1.382814] efifb: mode is 1366x768x32, linelength=5632, pages=1 [ 1.382815] efifb: scrolling: redraw [ 1.382816] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.382951] Console: switching to colour frame buffer device 170x48 [ 1.382971] fb0: EFI VGA frame buffer device [ 1.383644] ACPI: AC Adapter [ACAD] (off-line) [ 1.383709] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.383716] ACPI: Power Button [PWRB] [ 1.383761] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.383766] ACPI: Lid Switch [LID] [ 1.383821] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.383834] ACPI: Power Button [PWRF] [ 1.383884] Monitor-Mwait will be used to enter C-1 state [ 1.384879] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.384880] ACPI: Thermal Zone [TSZ0] (67 C) [ 1.385152] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.385153] ACPI: Thermal Zone [TSZ2] (20 C) [ 1.385361] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.387315] Linux agpgart interface v0.103 [ 1.391395] loop: module loaded [ 1.391757] libphy: Fixed MDIO Bus: probed [ 1.391758] tun: Universal TUN/TAP device driver, 1.6 [ 1.391793] PPP generic driver version 2.4.2 [ 1.391831] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.391835] ehci-pci: EHCI PCI platform driver [ 1.391861] ehci-platform: EHCI generic platform driver [ 1.391874] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.391876] ohci-pci: OHCI PCI platform driver [ 1.391884] ohci-platform: OHCI generic platform driver [ 1.391890] uhci_hcd: USB Universal Host Controller Interface driver [ 1.392123] xhci_hcd 0000:04:00.3: xHCI Host Controller [ 1.392131] xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 1 [ 1.392368] xhci_hcd 0000:04:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410 [ 1.392753] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.392755] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.392757] usb usb1: Product: xHCI Host Controller [ 1.392758] usb usb1: Manufacturer: Linux 5.3.0-19-generic xhci-hcd [ 1.392759] usb usb1: SerialNumber: 0000:04:00.3 [ 1.392894] hub 1-0:1.0: USB hub found [ 1.392911] hub 1-0:1.0: 4 ports detected [ 1.393192] xhci_hcd 0000:04:00.3: xHCI Host Controller [ 1.393195] xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 2 [ 1.393198] xhci_hcd 0000:04:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.393228] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.393272] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 1.393273] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.393274] usb usb2: Product: xHCI Host Controller [ 1.393275] usb usb2: Manufacturer: Linux 5.3.0-19-generic xhci-hcd [ 1.393276] usb usb2: SerialNumber: 0000:04:00.3 [ 1.393374] hub 2-0:1.0: USB hub found [ 1.393390] hub 2-0:1.0: 4 ports detected [ 1.394212] xhci_hcd 0000:04:00.4: xHCI Host Controller [ 1.394216] xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 3 [ 1.394399] xhci_hcd 0000:04:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410 [ 1.394691] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.394692] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.394693] usb usb3: Product: xHCI Host Controller [ 1.394694] usb usb3: Manufacturer: Linux 5.3.0-19-generic xhci-hcd [ 1.394695] usb usb3: SerialNumber: 0000:04:00.4 [ 1.394798] hub 3-0:1.0: USB hub found [ 1.394811] hub 3-0:1.0: 2 ports detected [ 1.395036] xhci_hcd 0000:04:00.4: xHCI Host Controller [ 1.395039] xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 4 [ 1.395041] xhci_hcd 0000:04:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 1.395068] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.395089] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 1.395090] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.395091] usb usb4: Product: xHCI Host Controller [ 1.395092] usb usb4: Manufacturer: Linux 5.3.0-19-generic xhci-hcd [ 1.395093] usb usb4: SerialNumber: 0000:04:00.4 [ 1.395192] hub 4-0:1.0: USB hub found [ 1.395203] hub 4-0:1.0: 1 port detected [ 1.395486] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.420238] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.420245] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.420435] mousedev: PS/2 mouse device common for all mice [ 1.420641] rtc_cmos 00:01: RTC can wake from S4 [ 1.420890] rtc_cmos 00:01: registered as rtc0 [ 1.420907] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.420914] i2c /dev entries driver [ 1.421010] device-mapper: uevent: version 1.0.3 [ 1.421102] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 1.421129] platform eisa.0: Probing EISA bus 0 [ 1.421144] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.421146] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.421147] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.421148] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.421150] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.421151] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.421152] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.421153] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.421154] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.421155] platform eisa.0: EISA: Detected 0 cards [ 1.421210] ledtrig-cpu: registered to indicate activity on CPUs [ 1.421215] EFI Variables Facility v0.08 2004-May-17 [ 1.431457] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.502649] battery: ACPI: Battery Slot [BAT1] (battery present) [ 1.725981] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.733975] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 1.799912] NET: Registered protocol family 10 [ 1.809117] Segment Routing with IPv6 [ 1.809165] NET: Registered protocol family 17 [ 1.809247] Key type dns_resolver registered [ 1.809745] RAS: Correctable Errors collector initialized. [ 1.809809] microcode: CPU0: patch_level=0x08101007 [ 1.809812] microcode: CPU1: patch_level=0x08101007 [ 1.809820] microcode: CPU2: patch_level=0x08101007 [ 1.809826] microcode: CPU3: patch_level=0x08101007 [ 1.809865] microcode: Microcode Update Driver: v2.2. [ 1.809918] sched_clock: Marking stable (1807595820, 2315924)->(1918662538, -108750794) [ 1.810100] registered taskstats version 1 [ 1.810115] Loading compiled-in X.509 certificates [ 1.812311] Loaded X.509 cert 'Build time autogenerated kernel key: 8b9a1a94c85156edc8bdd8557ee76ac2d955915c' [ 1.812366] zswap: loaded using pool lzo/zbud [ 1.819956] Key type big_key registered [ 1.823701] Key type encrypted registered [ 1.823705] AppArmor: AppArmor sha1 policy hashing enabled [ 1.830594] ima: No TPM chip found, activating TPM-bypass! [ 1.830643] ima: Allocated hash algorithm: sha1 [ 1.830655] No architecture policies found [ 1.830669] evm: Initialising EVM extended attributes: [ 1.830670] evm: security.selinux [ 1.830671] evm: security.SMACK64 [ 1.830671] evm: security.SMACK64EXEC [ 1.830671] evm: security.SMACK64TRANSMUTE [ 1.830672] evm: security.SMACK64MMAP [ 1.830672] evm: security.apparmor [ 1.830673] evm: security.ima [ 1.830673] evm: security.capability [ 1.830674] evm: HMAC attrs: 0x1 [ 1.831861] PM: Magic number: 11:127:38 [ 1.831890] bdi 7:3: hash matches [ 1.832096] rtc_cmos 00:01: setting system clock to 2019-11-03T18:01:29 UTC (1572804089) [ 1.832331] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.834571] Freeing unused decrypted memory: 2040K [ 1.835215] Freeing unused kernel image memory: 2668K [ 1.861960] Write protecting the kernel read-only data: 22528k [ 1.862812] Freeing unused kernel image memory: 2008K [ 1.863140] Freeing unused kernel image memory: 1416K [ 1.875180] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.875188] Run /init as init process [ 1.896271] usb 1-3: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=22.01 [ 1.896273] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.896275] usb 1-3: Product: USB Receiver [ 1.896276] usb 1-3: Manufacturer: Logitech [ 1.903996] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32 [ 1.904001] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.904005] usb 3-2: Product: USB2.0 Hub [ 1.936861] hidraw: raw HID events driver (C) Jiri Kosina [ 1.939539] hub 3-2:1.0: USB hub found [ 1.939952] hub 3-2:1.0: 4 ports detected [ 1.947426] usbcore: registered new interface driver usbhid [ 1.947428] usbhid: USB HID core driver [ 1.951089] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-3/1-3:1.0/0003:046D:C52F.0001/input/input5 [ 1.951236] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:04:00.3-3/input0 [ 1.951476] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/input/input6 [ 1.979502] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 1.980126] acpi device:0b: registered as cooling_device4 [ 1.980212] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input9 [ 1.997357] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found [ 2.004405] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.008445] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.008448] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 2.010251] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:04:00.3-3/input1 [ 2.021040] libphy: r8169: probed [ 2.021485] r8169 0000:02:00.0 eth0: RTL8168h/8111h, 10:62:e5:c5:fc:3c, XID 541, IRQ 44 [ 2.021488] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.038712] ahci 0000:05:00.0: version 3.0 [ 2.039086] ahci 0000:05:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.039090] ahci 0000:05:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 2.043121] cryptd: max_cpu_qlen set to 1000 [ 2.055085] scsi host0: ahci [ 2.056227] AVX2 version of gcm_enc/dec engaged. [ 2.056228] AES CTR mode by8 optimization enabled [ 2.060317] scsi host1: ahci [ 2.060547] ata1: SATA max UDMA/133 abar m2048@0xe0200000 port 0xe0200100 irq 46 [ 2.060551] ata2: SATA max UDMA/133 abar m2048@0xe0200000 port 0xe0200180 irq 46 [ 2.082365] logitech-djreceiver 0003:046D:C52F.0001: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:04:00.3-3/input0 [ 2.095867] r8169 0000:02:00.0 eno1: renamed from eth0 [ 2.186859] logitech-djreceiver 0003:046D:C52F.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:04:00.3-3/input1 [ 2.237953] usb 3-2.1: new high-speed USB device number 3 using xhci_hcd [ 2.249230] logitech-djreceiver 0003:046D:C52F.0002: device of type eQUAD step 4 DJ (0x04) connected on slot 1 [ 2.249818] input: Logitech Wireless Mouse PID:4008 Mouse as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input11 [ 2.250042] input: Logitech Wireless Mouse PID:4008 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input12 [ 2.250134] hid-generic 0003:046D:4008.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4008] on usb-0000:04:00.3-3/input1:1 [ 2.277499] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 2.347856] [drm] amdgpu kernel modesetting enabled. [ 2.348014] Parsing CRAT table with 1 nodes [ 2.348019] Creating topology SYSFS entries [ 2.348055] Topology: Add APU node [0x0:0x0] [ 2.348056] Finished initializing topology [ 2.348153] amdgpu 0000:04:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff [ 2.348155] amdgpu 0000:04:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xe0000000 -> 0xe01fffff [ 2.348156] amdgpu 0000:04:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xe0600000 -> 0xe067ffff [ 2.348158] checking generic (d0000000 420000) vs hw (d0000000 10000000) [ 2.348159] fb0: switching to amdgpudrmfb from EFI VGA [ 2.348283] Console: switching to colour dummy device 80x25 [ 2.348367] amdgpu 0000:04:00.0: vgaarb: deactivate vga console [ 2.348689] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x103C:0x84AE 0xC5). [ 2.349321] [drm] register mmio base: 0xE0600000 [ 2.349322] [drm] register mmio size: 524288 [ 2.349345] [drm] add ip block number 0 [ 2.349346] [drm] add ip block number 1 [ 2.349347] [drm] add ip block number 2 [ 2.349348] [drm] add ip block number 3 [ 2.349349] [drm] add ip block number 4 [ 2.349350] [drm] add ip block number 5 [ 2.349351] [drm] add ip block number 6 [ 2.349352] [drm] add ip block number 7 [ 2.349353] [drm] add ip block number 8 [ 2.369926] usb 3-2.1: New USB device found, idVendor=04f2, idProduct=b626, bcdDevice=26.46 [ 2.369928] usb 3-2.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.369932] usb 3-2.1: Product: HP TrueVision HD Camera [ 2.369933] usb 3-2.1: Manufacturer: Chicony Electronics Co.,Ltd. [ 2.369935] usb 3-2.1: SerialNumber: 0001 [ 2.387061] [drm] BIOS signature incorrect 0 0 [ 2.387073] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] [ 2.387081] caller pci_map_rom+0x71/0x18c mapping multiple BARs [ 2.391921] tsc: Refined TSC clocksource calibration: 2495.299 MHz [ 2.391932] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f7e0f86b9, max_idle_ns: 440795227344 ns [ 2.391961] clocksource: Switched to clocksource tsc [ 2.391967] ATOM BIOS: 113-RAVEN-103 [ 2.392017] [drm] VCN decode is enabled in VM mode [ 2.392018] [drm] VCN encode is enabled in VM mode [ 2.392018] [drm] VCN jpeg decode is enabled in VM mode [ 2.392069] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 2.392086] amdgpu 0000:04:00.0: VRAM: 256M 0x000000F400000000 - 0x000000F40FFFFFFF (256M used) [ 2.392088] amdgpu 0000:04:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 2.392089] amdgpu 0000:04:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 2.392095] [drm] Detected VRAM RAM=256M, BAR=256M [ 2.392097] [drm] RAM width 128bits DDR4 [ 2.392230] [TTM] Zone kernel: Available graphics memory: 3931328 KiB [ 2.392231] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 2.392232] [TTM] Initializing pool allocator [ 2.392246] [TTM] Initializing DMA pool allocator [ 2.392293] [drm] amdgpu: 256M of VRAM memory ready [ 2.392297] [drm] amdgpu: 3072M of GTT memory ready. [ 2.392323] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.392766] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). [ 2.395108] [drm] use_doorbell being set to: [true] [ 2.395208] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu [ 2.395371] [drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28 [ 2.395374] [drm] PSP loading VCN firmware [ 2.416782] [drm] reserve 0x400000 from 0xf400c00000 for PSP TMR [ 2.439433] input: Logitech M185/M225 as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input16 [ 2.439616] logitech-hidpp-device 0003:046D:4008.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech M185/M225] on usb-0000:04:00.3-3/input1:1 [ 2.505948] usb 3-2.3: new full-speed USB device number 4 using xhci_hcd [ 2.533938] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.533976] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.534311] ata2.00: supports DRM functions and may not be fully accessible [ 2.534394] ata2.00: ATA-11: KINGSTON SUV500M8240G, 003056RA, max UDMA/133 [ 2.534396] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.535169] ata2.00: Trusted Computing capability qword not valid! [ 2.535621] ata2.00: supports DRM functions and may not be fully accessible [ 2.536395] ata2.00: Trusted Computing capability qword not valid! [ 2.536398] ata2.00: configured for UDMA/133 [ 2.546803] ata1.00: ATA-8: ST500LT012-1DG142, 1003YAM1, max UDMA/133 [ 2.546805] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.568888] ata1.00: configured for UDMA/133 [ 2.569185] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 YAM1 PQ: 0 ANSI: 5 [ 2.569455] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.569529] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.569531] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.569546] sd 0:0:0:0: [sda] Write Protect is off [ 2.569550] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.569588] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.569702] scsi 1:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RA PQ: 0 ANSI: 5 [ 2.569945] scsi 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.570148] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.570150] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.570160] sd 1:0:0:0: [sdb] Write Protect is off [ 2.570162] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.570180] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.572613] sdb: sdb1 sdb2 [ 2.573240] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.627536] [drm] DM_PPLIB: values for F clock [ 2.627538] [drm] DM_PPLIB: 400000 in kHz, 3174 in mV [ 2.627538] [drm] DM_PPLIB: 933000 in kHz, 3724 in mV [ 2.627539] [drm] DM_PPLIB: 1067000 in kHz, 3924 in mV [ 2.627539] [drm] DM_PPLIB: 1200000 in kHz, 4074 in mV [ 2.627540] [drm] DM_PPLIB: values for DCF clock [ 2.627541] [drm] DM_PPLIB: 300000 in kHz, 3174 in mV [ 2.627542] [drm] DM_PPLIB: 600000 in kHz, 3724 in mV [ 2.627542] [drm] DM_PPLIB: 626000 in kHz, 3924 in mV [ 2.627542] [drm] DM_PPLIB: 654000 in kHz, 4074 in mV [ 2.637361] [drm] Display Core initialized with v3.2.35! [ 2.642257] usb 3-2.3: New USB device found, idVendor=0bda, idProduct=b009, bcdDevice= 2.00 [ 2.642259] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.642261] usb 3-2.3: Product: 802.11n WLAN Adapter [ 2.642262] usb 3-2.3: Manufacturer: Realtek [ 2.642263] usb 3-2.3: SerialNumber: 00e04c000001 [ 2.648149] [drm] SADs count is: -2, don't need to read it [ 2.649948] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.649949] [drm] Driver supports precise vblank timestamp query. [ 2.664292] [drm] VCN decode and encode initialized successfully(under SPG Mode). [ 2.666767] kfd kfd: Allocated 3969056 bytes on gart [ 2.668121] kfd kfd: Failed to resume IOMMU for device 1002:15dd [ 2.668335] kfd kfd: device 1002:15dd NOT added due to errors [ 2.668486] sda: sda1 sda2 sda3 [ 2.669286] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.670142] [drm] fb mappable at 0xC1000000 [ 2.670143] [drm] vram apper at 0xC0000000 [ 2.670144] [drm] size 4325376 [ 2.670145] [drm] fb depth is 24 [ 2.670145] [drm] pitch is 5632 [ 2.670233] fbcon: amdgpudrmfb (fb0) is primary device [ 2.670332] Console: switching to colour frame buffer device 170x48 [ 2.670358] amdgpu 0000:04:00.0: fb0: amdgpudrmfb frame buffer device [ 2.698150] amdgpu 0000:04:00.0: ring gfx uses VM inv eng 0 on hub 0 [ 2.698153] amdgpu 0000:04:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 2.698154] amdgpu 0000:04:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 2.698156] amdgpu 0000:04:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 2.698157] amdgpu 0000:04:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 2.698158] amdgpu 0000:04:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 2.698160] amdgpu 0000:04:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 2.698161] amdgpu 0000:04:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 2.698162] amdgpu 0000:04:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 2.698164] amdgpu 0000:04:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 2.698166] amdgpu 0000:04:00.0: ring sdma0 uses VM inv eng 0 on hub 1 [ 2.698167] amdgpu 0000:04:00.0: ring vcn_dec uses VM inv eng 1 on hub 1 [ 2.698169] amdgpu 0000:04:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1 [ 2.698170] amdgpu 0000:04:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1 [ 2.698171] amdgpu 0000:04:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1 [ 2.702247] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:04:00.0 on minor 0 [ 2.789274] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826] [ 2.818858] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..] [ 2.818866] psmouse serio1: synaptics: Your touchpad (PNP: SYN327b PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 2.877124] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.16, id: 0x1e2b1, caps: 0xf00323/0x840300/0x2e800/0x400000, board id: 3320, fw id: 2659795 [ 2.914174] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 3.253927] raid6: avx2x4 gen() 17014 MB/s [ 3.301925] raid6: avx2x4 xor() 8211 MB/s [ 3.349925] raid6: avx2x2 gen() 16400 MB/s [ 3.397924] raid6: avx2x2 xor() 10202 MB/s [ 3.445926] raid6: avx2x1 gen() 12539 MB/s [ 3.493926] raid6: avx2x1 xor() 9356 MB/s [ 3.541926] raid6: sse2x4 gen() 10974 MB/s [ 3.589924] raid6: sse2x4 xor() 6303 MB/s [ 3.637927] raid6: sse2x2 gen() 10776 MB/s [ 3.685923] raid6: sse2x2 xor() 7029 MB/s [ 3.733928] raid6: sse2x1 gen() 5244 MB/s [ 3.781928] raid6: sse2x1 xor() 5110 MB/s [ 3.781929] raid6: using algorithm avx2x4 gen() 17014 MB/s [ 3.781929] raid6: .... xor() 8211 MB/s, rmw enabled [ 3.781930] raid6: using avx2x2 recovery algorithm [ 3.782908] xor: automatically using best checksumming function avx [ 3.783875] async_tx: api initialized (async) [ 3.887455] Btrfs loaded, crc32c=crc32c-intel [ 4.576459] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 4.788626] systemd[1]: Inserted module 'autofs4' [ 5.194185] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 5.214351] systemd[1]: Detected architecture x86-64. [ 5.219972] systemd[1]: Set hostname to . [ 5.220671] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 5.328297] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 5.371390] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. [ 5.376223] systemd[1]: /lib/systemd/system/virtlockd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly. [ 5.376935] systemd[1]: /lib/systemd/system/virtlockd-admin.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock → /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly. [ 5.377340] systemd[1]: /lib/systemd/system/virtlogd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-sock → /run/libvirt/virtlogd-sock; please update the unit file accordingly. [ 5.378021] systemd[1]: /lib/systemd/system/virtlogd-admin.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-admin-sock → /run/libvirt/virtlogd-admin-sock; please update the unit file accordingly. [ 5.458201] RPC: Registered named UNIX socket transport module. [ 5.458203] RPC: Registered udp transport module. [ 5.458204] RPC: Registered tcp transport module. [ 5.458205] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.474308] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro [ 5.504532] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 5.518138] lp: driver loaded but no devices found [ 5.540267] ppdev: user-space parallel port driver [ 5.608819] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 6.073439] systemd-journald[438]: Received request to flush runtime journal from PID 1 [ 6.085623] systemd-journald[438]: File /var/log/journal/2d6355500900486c826a4bbf954b4607/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 6.123212] input: HP Wireless hotkeys as /devices/virtual/input/input17 [ 6.255783] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.257421] snd_pci_acp3x 0000:04:00.5: Invalid ACP audio mode : 1 [ 6.267435] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.332207] rtlwifi: loading out-of-tree module taints kernel. [ 6.347212] rtlwifi: module verification failed: signature and/or required key missing - tainting kernel [ 6.371794] mc: Linux media interface: v0.10 [ 6.424067] videodev: Linux video capture interface: v2.00 [ 6.441490] Bluetooth: Core ver 2.22 [ 6.441519] NET: Registered protocol family 31 [ 6.441520] Bluetooth: HCI device and connection manager initialized [ 6.441527] Bluetooth: HCI socket layer initialized [ 6.441531] Bluetooth: L2CAP socket layer initialized [ 6.441535] Bluetooth: SCO socket layer initialized [ 6.484947] usbcore: registered new interface driver btusb [ 6.486816] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client [ 6.490323] Bluetooth: hci0: RTL: rtl: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 6.493327] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 6.493332] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_fw.bin [ 6.501284] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_config.bin [ 6.502556] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266 [ 6.546464] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input19 [ 6.571961] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.571965] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.571967] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 6.571975] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 6.571977] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 6.571979] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 6.571981] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 6.581839] kvm: Nested Virtualization enabled [ 6.581868] kvm: Nested Paging enabled [ 6.581869] SVM: Virtual VMLOAD VMSAVE supported [ 6.581869] SVM: Virtual GIF supported [ 6.602792] MCE: In-kernel MCE decoding enabled. [ 6.605791] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.605794] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.606859] uvcvideo: Found UVC 1.00 device HP TrueVision HD Camera (04f2:b626) [ 6.608596] rtl8723de: Using firmware rtlwifi/rtl8723defw.bin [ 6.621098] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 6.621554] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input20 [ 6.621653] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input21 [ 6.621802] rtlwifi: rtlwifi: wireless switch is on [ 6.622712] uvcvideo 3-2.1:1.0: Entity type for entity Extension 4 was not initialized! [ 6.622715] uvcvideo 3-2.1:1.0: Entity type for entity Processing 2 was not initialized! [ 6.622718] uvcvideo 3-2.1:1.0: Entity type for entity Camera 1 was not initialized! [ 6.622834] input: HP TrueVision HD Camera: HP Tru as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-2/3-2.1/3-2.1:1.0/input/input22 [ 6.622954] usbcore: registered new interface driver uvcvideo [ 6.622955] USB Video Class driver (1.1.1) [ 6.654964] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.654967] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.699034] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.699038] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.758294] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.758297] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.788211] rtl8723de 0000:03:00.0 wlo1: renamed from wlan0 [ 7.090664] hp_wmi: query 0xd returned error 0x5 [ 7.090771] input: HP WMI hotkeys as /devices/virtual/input/input18 [ 7.597604] audit: type=1400 audit(1572804095.259:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=978 comm="apparmor_parser" [ 7.603066] audit: type=1400 audit(1572804095.267:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=981 comm="apparmor_parser" [ 7.603073] audit: type=1400 audit(1572804095.267:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=981 comm="apparmor_parser" [ 7.614400] audit: type=1400 audit(1572804095.279:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=979 comm="apparmor_parser" [ 7.614570] audit: type=1400 audit(1572804095.279:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=980 comm="apparmor_parser" [ 7.614573] audit: type=1400 audit(1572804095.279:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=980 comm="apparmor_parser" [ 7.614577] audit: type=1400 audit(1572804095.279:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=980 comm="apparmor_parser" [ 7.614580] audit: type=1400 audit(1572804095.279:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=980 comm="apparmor_parser" [ 7.615004] audit: type=1400 audit(1572804095.279:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=986 comm="apparmor_parser" [ 7.615333] audit: type=1400 audit(1572804095.279:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=987 comm="apparmor_parser" [ 8.404586] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.404588] Bluetooth: BNEP filters: protocol multicast [ 8.404596] Bluetooth: BNEP socket layer initialized [ 8.913994] Bluetooth: hci0: command 0xfc20 tx timeout [ 9.204325] aufs 4.x-rcN-20190805 [ 9.445234] Generic Realtek PHY r8169-200:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 9.559098] r8169 0000:02:00.0 eno1: Link is Down [ 9.656343] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 9.656570] NFSD: Using legacy client tracking operations. [ 9.656573] NFSD: starting 90-second grace period (net f0000098) [ 11.163124] r8169 0000:02:00.0 eno1: Link is Up - 100Mbps/Full - flow control off [ 11.218996] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 11.610251] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 11.611601] virbr0: port 1(virbr0-nic) entered blocking state [ 11.611605] virbr0: port 1(virbr0-nic) entered disabled state [ 11.611848] device virbr0-nic entered promiscuous mode [ 11.644551] bpfilter: Loaded bpfilter_umh pid 1398 [ 14.059328] virbr0: port 1(virbr0-nic) entered blocking state [ 14.059332] virbr0: port 1(virbr0-nic) entered listening state [ 14.172288] virbr0: port 1(virbr0-nic) entered disabled state [ 14.545125] wlo1: authenticate with 64:d1:54:9e:79:91 [ 14.555285] wlo1: send auth to 64:d1:54:9e:79:91 (try 1/3) [ 14.556753] wlo1: authenticated [ 14.561940] wlo1: associate with 64:d1:54:9e:79:91 (try 1/3) [ 14.564898] wlo1: RX AssocResp from 64:d1:54:9e:79:91 (capab=0x431 status=0 aid=2) [ 14.937855] wlo1: associated [ 15.642662] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 16.945978] Bluetooth: hci0: RTL: download fw command failed (-110) [ 19.074328] NET: Registered protocol family 24 [ 19.088133] l2tp_core: L2TP core driver, V2.0 [ 19.091621] l2tp_netlink: L2TP netlink interface [ 19.104729] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 19.120163] vboxdrv: Found 4 processor cores [ 19.122138] NET: Registered protocol family 15 [ 19.140940] vboxdrv: TSC mode is Invariant, tentative frequency 2495273484 Hz [ 19.140942] vboxdrv: Successfully loaded version 6.0.14_Ubuntu (interface 0x00290008) [ 19.167718] VBoxNetFlt: Successfully started. [ 19.196137] VBoxNetAdp: Successfully started. [ 19.214156] Initializing XFRM netlink socket [ 19.227690] VBoxPciLinuxInit [ 19.237013] vboxpci: IOMMU found [ 27.840791] r8169 0000:02:00.0 eno1: Link is Down [ 316.868956] PM: suspend entry (deep) [ 316.878912] Filesystems sync: 0.009 seconds [ 316.879400] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 316.881637] OOM killer disabled. [ 316.881637] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 316.882930] printk: Suspending console(s) (use no_console_suspend to debug) [ 316.883257] wlo1: deauthenticating from 64:d1:54:9e:79:91 by local choice (Reason: 3=DEAUTH_LEAVING) [ 316.910283] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 316.910318] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 316.911215] sd 1:0:0:0: [sdb] Stopping disk [ 316.913890] sd 0:0:0:0: [sda] Stopping disk [ 317.536662] ACPI: EC: interrupt blocked [ 317.574582] ACPI: Preparing to enter system sleep state S3 [ 317.576807] ACPI: EC: event blocked [ 317.576808] ACPI: EC: EC stopped [ 317.576809] PM: Saving platform NVS memory [ 317.577359] Disabling non-boot CPUs ... [ 317.578023] IRQ 52: no longer affine to CPU1 [ 317.579104] smpboot: CPU 1 is now offline [ 317.586039] IRQ 47: no longer affine to CPU2 [ 317.587240] smpboot: CPU 2 is now offline [ 317.594830] IRQ 27: no longer affine to CPU3 [ 317.594854] IRQ 32: no longer affine to CPU3 [ 317.594870] IRQ 33: no longer affine to CPU3 [ 317.594903] IRQ 38: no longer affine to CPU3 [ 317.595948] smpboot: CPU 3 is now offline [ 317.603620] ACPI: Low-level resume complete [ 317.603674] ACPI: EC: EC started [ 317.603675] PM: Restoring platform NVS memory [ 317.698970] Enabling non-boot CPUs ... [ 317.699019] x86: Booting SMP configuration: [ 317.699020] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 317.699248] microcode: CPU1: patch_level=0x08101007 [ 317.701694] CPU1 is up [ 317.701732] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 317.701984] microcode: CPU2: patch_level=0x08101007 [ 317.704513] CPU2 is up [ 317.704530] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 317.704749] microcode: CPU3: patch_level=0x08101007 [ 317.707272] CPU3 is up [ 317.707886] ACPI: Waking up from system sleep state S3 [ 317.709533] ACPI: EC: interrupt unblocked [ 317.767169] rtlwifi: rtlwifi: wireless switch is on [ 317.767180] ACPI: EC: event unblocked [ 317.768433] sd 0:0:0:0: [sda] Starting disk [ 317.768464] sd 1:0:0:0: [sdb] Starting disk [ 317.769156] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). [ 317.769213] [drm] PSP is resuming... [ 317.789085] [drm] reserve 0x400000 from 0xf400c00000 for PSP TMR [ 317.872363] ACPI: button: The lid device is not compliant to SW_LID. [ 317.999063] amdgpu: [powerplay] dpm has been enabled [ 318.015894] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 318.023958] usb 3-2.3: reset full-speed USB device number 4 using xhci_hcd [ 318.113906] [drm] VCN decode and encode initialized successfully(under SPG Mode). [ 318.113932] amdgpu 0000:04:00.0: ring gfx uses VM inv eng 0 on hub 0 [ 318.113934] amdgpu 0000:04:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 318.113936] amdgpu 0000:04:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 318.113938] amdgpu 0000:04:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 318.113940] amdgpu 0000:04:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 318.113942] amdgpu 0000:04:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 318.113944] amdgpu 0000:04:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 318.113945] amdgpu 0000:04:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 318.113947] amdgpu 0000:04:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 318.113949] amdgpu 0000:04:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 318.113951] amdgpu 0000:04:00.0: ring sdma0 uses VM inv eng 0 on hub 1 [ 318.113953] amdgpu 0000:04:00.0: ring vcn_dec uses VM inv eng 1 on hub 1 [ 318.113955] amdgpu 0000:04:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1 [ 318.113957] amdgpu 0000:04:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1 [ 318.113959] amdgpu 0000:04:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1 [ 318.450221] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 318.450568] ata2.00: supports DRM functions and may not be fully accessible [ 318.451415] ata2.00: Trusted Computing capability qword not valid! [ 318.451848] ata2.00: supports DRM functions and may not be fully accessible [ 318.452643] ata2.00: Trusted Computing capability qword not valid! [ 318.452646] ata2.00: configured for UDMA/133 [ 318.878517] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826] [ 318.907998] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..] [ 319.706259] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 319.737960] ata1.00: configured for UDMA/133 [ 319.855428] acpi LNXPOWER:01: Turning OFF [ 319.855475] OOM killer enabled. [ 319.855476] Restarting tasks ... [ 319.870177] Bluetooth: hci0: RTL: rtl: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 319.873160] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 319.873165] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_fw.bin [ 319.873194] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_config.bin [ 319.873227] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266 [ 319.875818] done. [ 319.946353] PM: suspend exit [ 321.882311] Generic Realtek PHY r8169-200:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 321.987385] r8169 0000:02:00.0 eno1: Link is Down [ 322.290230] Bluetooth: hci0: command 0xfc20 tx timeout [ 326.524533] wlo1: authenticate with 64:d1:54:9e:79:91 [ 326.534668] wlo1: send auth to 64:d1:54:9e:79:91 (try 1/3) [ 326.535872] wlo1: authenticated [ 326.538270] wlo1: associate with 64:d1:54:9e:79:91 (try 1/3) [ 326.541223] wlo1: RX AssocResp from 64:d1:54:9e:79:91 (capab=0x431 status=0 aid=2) [ 326.854655] wlo1: associated [ 327.547239] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 329.293925] logitech-hidpp-device 0003:046D:4008.0003: HID++ 2.0 device connected. [ 330.386237] Bluetooth: hci0: RTL: download fw command failed (-110) [ 342.181654] r8169 0000:02:00.0 eno1: Link is Up - 100Mbps/Half - flow control off [ 342.181673] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 382.406838] usb 1-1: new low-speed USB device number 3 using xhci_hcd [ 382.572274] usb 1-1: New USB device found, idVendor=2a7a, idProduct=6a18, bcdDevice= 0.01 [ 382.572278] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 382.572281] usb 1-1: Product: CASUE USB Keyboard [ 382.572283] usb 1-1: Manufacturer: CASUE [ 382.605762] input: CASUE CASUE USB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-1/1-1:1.0/0003:2A7A:6A18.0004/input/input23 [ 382.663759] hid-generic 0003:2A7A:6A18.0004: input,hidraw3: USB HID v1.10 Keyboard [CASUE CASUE USB Keyboard] on usb-0000:04:00.3-1/input0 [ 382.670806] input: CASUE CASUE USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-1/1-1:1.1/0003:2A7A:6A18.0005/input/input24 [ 382.727563] input: CASUE CASUE USB Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-1/1-1:1.1/0003:2A7A:6A18.0005/input/input25 [ 382.727704] hid-generic 0003:2A7A:6A18.0005: input,hidraw4: USB HID v1.10 Device [CASUE CASUE USB Keyboard] on usb-0000:04:00.3-1/input1 [ 400.738174] wlo1: deauthenticating from 64:d1:54:9e:79:91 by local choice (Reason: 3=DEAUTH_LEAVING) [ 402.483557] wlo1: authenticate with 64:d1:54:9e:79:91 [ 403.993673] wlo1: send auth to 64:d1:54:9e:79:91 (try 1/3) [ 403.994894] wlo1: authenticated [ 403.998376] wlo1: associate with 64:d1:54:9e:79:91 (try 1/3) [ 404.001318] wlo1: RX AssocResp from 64:d1:54:9e:79:91 (capab=0x431 status=0 aid=2) [ 404.315247] wlo1: associated [ 405.007337] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready