[ 0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.000000] Linux version 4.5.0-040500-generic (kernel@tangerine) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #201603140130 SMP Mon Mar 14 05:32:22 UTC 2016 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.5.0-040500-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000deb8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000deb90000-0x00000000debd0fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000debd1000-0x00000000dec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dec01000-0x00000000dec15fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000dec16000-0x00000000dee04fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dee05000-0x00000000dee8cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dee8d000-0x00000000df13ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df140000-0x00000000df384fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000df385000-0x00000000df392fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000df393000-0x00000000df3bffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000df3c0000-0x00000000df3c4fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000df3c5000-0x00000000df407fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000df408000-0x00000000df7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xdf385000 ACPI 2.0=0xdf385000 SMBIOS=0xdec28e98 MPS=0xfc9b0 [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH P67, BIOS 3602 11/01/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-DFFFF uncachable [ 0.000000] E0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FF0000000 write-back [ 0.000000] 2 base 410000000 mask FF8000000 write-back [ 0.000000] 3 base 418000000 mask FFC000000 write-back [ 0.000000] 4 base 41C000000 mask FFE000000 write-back [ 0.000000] 5 base 41E000000 mask FFF000000 write-back [ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 16GB, type WB [ 0.000000] reg 1, base: 16GB, range: 256MB, type WB [ 0.000000] reg 2, base: 16640MB, range: 128MB, type WB [ 0.000000] reg 3, base: 16768MB, range: 64MB, type WB [ 0.000000] reg 4, base: 16832MB, range: 32MB, type WB [ 0.000000] reg 5, base: 16864MB, range: 16MB, type WB [ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC [ 0.000000] total RAM covered: 16368M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 8GB, type WB [ 0.000000] reg 5, base: 16GB, range: 512MB, type WB [ 0.000000] reg 6, base: 16880MB, range: 16MB, type UC [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcdc0-0x000fcdcf] mapped at [ffff8800000fcdc0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] BRK [0x0f207000, 0x0f207fff] PGTABLE [ 0.000000] BRK [0x0f208000, 0x0f208fff] PGTABLE [ 0.000000] BRK [0x0f209000, 0x0f209fff] PGTABLE [ 0.000000] BRK [0x0f20a000, 0x0f20afff] PGTABLE [ 0.000000] BRK [0x0f20b000, 0x0f20bfff] PGTABLE [ 0.000000] BRK [0x0f20c000, 0x0f20cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33d4a000-0x35e9cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DF385000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DF385078 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DF390AB0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DF385170 00B93C (v02 ALASKA A M I 00000015 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DF3BEF80 000040 [ 0.000000] ACPI: APIC 0x00000000DF390BA8 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DF390C40 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DF390C80 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DF390CB8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000DF391028 0005CC (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DF3915F8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: BGRT 0x00000000DF3920E8 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x41efed000-0x41eff0fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000041effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000deb8ffff] [ 0.000000] node 0: [mem 0x00000000df408000-0x00000000df7fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff] [ 0.000000] On node 0 totalpages: 4185894 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 46 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14207 pages used for memmap [ 0.000000] DMA32 zone: 909192 pages, LIFO batch:31 [ 0.000000] Normal zone: 51136 pages used for memmap [ 0.000000] Normal zone: 3272704 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdeb90000-0xdebd0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdebd1000-0xdec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdec01000-0xdec15fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdec16000-0xdee04fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdee05000-0xdee8cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdee8d000-0xdf13ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf140000-0xdf384fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf385000-0xdf392fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf393000-0xdf3bffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf3c0000-0xdf3c4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf3c5000-0xdf407fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041ec00000 s97624 r8192 d29352 u262144 [ 0.000000] pcpu-alloc: s97624 r8192 d29352 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4120441 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.5.0-040500-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16175140K/16743576K available (8352K kernel code, 1299K rwdata, 4048K rodata, 1488K init, 1292K bss, 568436K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3399.977 MHz processor [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.95 BogoMIPS (lpj=13599908) [ 0.000027] pid_max: default: 32768 minimum: 301 [ 0.000031] ACPI: Core revision 20160108 [ 0.005417] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.015890] Security Framework initialized [ 0.015891] Yama: becoming mindful. [ 0.015896] AppArmor: AppArmor initialized [ 0.016606] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.018890] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.019876] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.019889] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.020087] CPU: Physical Processor ID: 0 [ 0.020087] CPU: Processor Core ID: 0 [ 0.020091] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.020092] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.020093] mce: CPU supports 9 MCE banks [ 0.020103] CPU0: Thermal monitoring enabled (TM1) [ 0.020107] process: using mwait in idle threads [ 0.020109] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.020110] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.020405] Freeing SMP alternatives memory: 32K (ffffffff820ba000 - ffffffff820c2000) [ 0.128280] ftrace: allocating 31937 entries in 125 pages [ 0.139971] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.179657] TSC deadline timer enabled [ 0.179659] smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.179683] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.179698] ... version: 3 [ 0.179699] ... bit width: 48 [ 0.179699] ... generic registers: 4 [ 0.179700] ... value mask: 0000ffffffffffff [ 0.179701] ... max period: 0000ffffffffffff [ 0.179701] ... fixed-purpose events: 3 [ 0.179702] ... event mask: 000000070000000f [ 0.180258] x86: Booting SMP configuration: [ 0.180260] .... node #0, CPUs: #1 [ 0.180841] microcode: CPU1 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.182981] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.183041] #2 [ 0.183665] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.185783] #3 [ 0.186299] microcode: CPU3 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.188416] #4 #5 #6 #7 [ 0.198057] x86: Booted up 1 node, 8 CPUs [ 0.198060] smpboot: Total of 8 processors activated (54399.63 BogoMIPS) [ 0.204556] devtmpfs: initialized [ 0.207033] evm: security.selinux [ 0.207034] evm: security.SMACK64 [ 0.207035] evm: security.SMACK64EXEC [ 0.207036] evm: security.SMACK64TRANSMUTE [ 0.207036] evm: security.SMACK64MMAP [ 0.207037] evm: security.ima [ 0.207038] evm: security.capability [ 0.207088] PM: Registering ACPI NVS region [mem 0xdee05000-0xdee8cfff] (557056 bytes) [ 0.207094] PM: Registering ACPI NVS region [mem 0xdf140000-0xdf384fff] (2379776 bytes) [ 0.207116] PM: Registering ACPI NVS region [mem 0xdf393000-0xdf3bffff] (184320 bytes) [ 0.207118] PM: Registering ACPI NVS region [mem 0xdf3c5000-0xdf407fff] (274432 bytes) [ 0.207185] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.207230] pinctrl core: initialized pinctrl subsystem [ 0.207317] RTC time: 17:16:17, date: 03/15/16 [ 0.207398] NET: Registered protocol family 16 [ 0.216411] cpuidle: using governor ladder [ 0.236411] cpuidle: using governor menu [ 0.236419] PCCT header not found. [ 0.236490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.236491] ACPI: bus type PCI registered [ 0.236493] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.236553] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.236555] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.236563] PCI: Using configuration type 1 for base access [ 0.236877] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.245845] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.246045] ACPI: Added _OSI(Module Device) [ 0.246046] ACPI: Added _OSI(Processor Device) [ 0.246047] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.246048] ACPI: Added _OSI(Processor Aggregator Device) [ 0.247059] ACPI: Executed 1 blocks of module-level executable AML code [ 0.248924] ACPI: Dynamic OEM Table Load: [ 0.248929] ACPI: SSDT 0xFFFF88040BC29000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.249303] ACPI: Dynamic OEM Table Load: [ 0.249306] ACPI: SSDT 0xFFFF88040C372800 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.249628] ACPI: Dynamic OEM Table Load: [ 0.249631] ACPI: SSDT 0xFFFF88040C381800 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.250648] ACPI : EC: EC started [ 0.250653] ACPI: Interpreter enabled [ 0.250667] ACPI: (supports S0 S1 S3 S4 S5) [ 0.250668] ACPI: Using IOAPIC for interrupt routing [ 0.250684] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.255288] ACPI: Power Resource [FN00] (off) [ 0.255348] ACPI: Power Resource [FN01] (off) [ 0.255405] ACPI: Power Resource [FN02] (off) [ 0.255461] ACPI: Power Resource [FN03] (off) [ 0.255518] ACPI: Power Resource [FN04] (off) [ 0.255946] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.255950] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.255996] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID [ 0.255997] _OSC request data: 1 1f 0 [ 0.256000] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.256328] PCI host bridge to bus 0000:00 [ 0.256330] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.256331] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.256332] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.256334] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.256335] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.256336] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] [ 0.256337] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.256342] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.256413] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.256439] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.256472] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.256526] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.256546] pci 0000:00:16.0: reg 0x10: [mem 0xf762c000-0xf762c00f 64bit] [ 0.256615] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.256681] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.256696] pci 0000:00:19.0: reg 0x10: [mem 0xf7600000-0xf761ffff] [ 0.256703] pci 0000:00:19.0: reg 0x14: [mem 0xf7629000-0xf7629fff] [ 0.256711] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f] [ 0.256766] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.256801] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.256831] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.256847] pci 0000:00:1a.0: reg 0x10: [mem 0xf7628000-0xf76283ff] [ 0.256925] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.256971] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.257002] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.257016] pci 0000:00:1b.0: reg 0x10: [mem 0xf7620000-0xf7623fff 64bit] [ 0.257074] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.257113] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.257143] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.257213] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.257251] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.257281] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.257351] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.257389] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.257419] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.257490] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.257530] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.257559] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.257629] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.257668] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.257698] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401 [ 0.257768] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.257807] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 0.257836] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 0.257906] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.257945] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 0.257975] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.257991] pci 0000:00:1d.0: reg 0x10: [mem 0xf7627000-0xf76273ff] [ 0.258069] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.258114] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.258145] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100 [ 0.258297] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.258310] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097] [ 0.258317] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083] [ 0.258324] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077] [ 0.258331] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063] [ 0.258338] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.258345] pci 0000:00:1f.2: reg 0x24: [mem 0xf7626000-0xf76267ff] [ 0.258381] pci 0000:00:1f.2: PME# supported from D3hot [ 0.258440] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.258453] pci 0000:00:1f.3: reg 0x10: [mem 0xf7625000-0xf76250ff 64bit] [ 0.258472] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.258572] pci 0000:01:00.0: [10de:13c2] type 00 class 0x030000 [ 0.258582] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.258592] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.258600] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.258607] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.258613] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.258690] pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300 [ 0.258699] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.264452] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.264454] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.264456] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.264458] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.264528] pci 0000:02:00.0: [10b5:8112] type 01 class 0x060400 [ 0.264699] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.272459] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.272462] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.272551] pci 0000:03:04.0: [13f6:8788] type 00 class 0x040100 [ 0.272579] pci 0000:03:04.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.272716] pci 0000:03:04.0: supports D1 D2 [ 0.272811] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.272817] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff] [ 0.272901] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.272929] pci 0000:04:00.0: reg 0x10: [mem 0xf7500000-0xf7501fff 64bit] [ 0.273070] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.273110] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.280465] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.280470] pci 0000:00:1c.1: bridge window [mem 0xf7500000-0xf75fffff] [ 0.280548] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185 [ 0.280586] pci 0000:05:00.0: reg 0x10: [io 0xc040-0xc047] [ 0.280601] pci 0000:05:00.0: reg 0x14: [io 0xc030-0xc033] [ 0.280617] pci 0000:05:00.0: reg 0x18: [io 0xc020-0xc027] [ 0.280632] pci 0000:05:00.0: reg 0x1c: [io 0xc010-0xc013] [ 0.280647] pci 0000:05:00.0: reg 0x20: [io 0xc000-0xc00f] [ 0.280663] pci 0000:05:00.0: reg 0x24: [mem 0xf7410000-0xf74101ff] [ 0.280679] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.280744] pci 0000:05:00.0: PME# supported from D3hot [ 0.280772] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.288468] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.288472] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.288475] pci 0000:00:1c.3: bridge window [mem 0xf7400000-0xf74fffff] [ 0.288544] pci 0000:06:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.288572] pci 0000:06:00.0: reg 0x10: [mem 0xf7300000-0xf7301fff 64bit] [ 0.288714] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.288752] pci 0000:06:00.0: System wakeup disabled by ACPI [ 0.296473] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.296478] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff] [ 0.296540] pci 0000:07:00.0: [1b21:1080] type 01 class 0x060401 [ 0.296653] pci 0000:07:00.0: System wakeup disabled by ACPI [ 0.296676] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractive decode) [ 0.296679] pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff] [ 0.296683] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff] [ 0.296689] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.296690] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.296691] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.296692] pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.296693] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.296694] pci 0000:00:1c.6: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode) [ 0.296748] pci 0000:08:01.0: [1106:3044] type 00 class 0x0c0010 [ 0.296776] pci 0000:08:01.0: reg 0x10: [mem 0xf7200000-0xf72007ff] [ 0.296794] pci 0000:08:01.0: reg 0x14: [io 0xb000-0xb07f] [ 0.296923] pci 0000:08:01.0: supports D2 [ 0.296925] pci 0000:08:01.0: PME# supported from D2 D3hot D3cold [ 0.297024] pci 0000:07:00.0: PCI bridge to [bus 08] (subtractive decode) [ 0.297034] pci 0000:07:00.0: bridge window [io 0xb000-0xbfff] [ 0.297039] pci 0000:07:00.0: bridge window [mem 0xf7200000-0xf72fffff] [ 0.297049] pci 0000:07:00.0: bridge window [io 0xb000-0xbfff] (subtractive decode) [ 0.297050] pci 0000:07:00.0: bridge window [mem 0xf7200000-0xf72fffff] (subtractive decode) [ 0.297051] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.297052] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.297053] pci 0000:07:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.297054] pci 0000:07:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.297056] pci 0000:07:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.297057] pci 0000:07:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode) [ 0.297126] pci 0000:09:00.0: [1b4b:9172] type 00 class 0x010601 [ 0.297146] pci 0000:09:00.0: reg 0x10: [io 0xa040-0xa047] [ 0.297158] pci 0000:09:00.0: reg 0x14: [io 0xa030-0xa033] [ 0.297170] pci 0000:09:00.0: reg 0x18: [io 0xa020-0xa027] [ 0.297182] pci 0000:09:00.0: reg 0x1c: [io 0xa010-0xa013] [ 0.297194] pci 0000:09:00.0: reg 0x20: [io 0xa000-0xa00f] [ 0.297206] pci 0000:09:00.0: reg 0x24: [mem 0xf7110000-0xf71101ff] [ 0.297218] pci 0000:09:00.0: reg 0x30: [mem 0xf7100000-0xf710ffff pref] [ 0.297277] pci 0000:09:00.0: PME# supported from D3hot [ 0.297305] pci 0000:09:00.0: System wakeup disabled by ACPI [ 0.304467] pci 0000:00:1c.7: PCI bridge to [bus 09] [ 0.304470] pci 0000:00:1c.7: bridge window [io 0xa000-0xafff] [ 0.304473] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff] [ 0.304898] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.304936] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.304973] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.305009] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.305045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.305081] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.305117] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.305153] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.305334] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.305347] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.305422] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.305423] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.305425] vgaarb: loaded [ 0.305426] vgaarb: bridge control possible 0000:01:00.0 [ 0.305587] SCSI subsystem initialized [ 0.305612] libata version 3.00 loaded. [ 0.305628] ACPI: bus type USB registered [ 0.305640] usbcore: registered new interface driver usbfs [ 0.305646] usbcore: registered new interface driver hub [ 0.305659] usbcore: registered new device driver usb [ 0.305792] PCI: Using ACPI for IRQ routing [ 0.307086] PCI: pci_cache_line_size set to 64 bytes [ 0.307159] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.307161] e820: reserve RAM buffer [mem 0xdeb90000-0xdfffffff] [ 0.307162] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff] [ 0.307163] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] [ 0.307246] NetLabel: Initializing [ 0.307247] NetLabel: domain hash size = 128 [ 0.307247] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.307257] NetLabel: unlabeled traffic allowed by default [ 0.307310] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.307314] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.310340] clocksource: Switched to clocksource hpet [ 0.314594] VFS: Disk quotas dquot_6.6.0 [ 0.314610] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.314682] AppArmor: AppArmor Filesystem Enabled [ 0.314726] pnp: PnP ACPI init [ 0.314799] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.314802] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.314868] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.314869] system 00:01: [io 0x0200-0x020f] has been reserved [ 0.314871] system 00:01: [io 0xffff] has been reserved [ 0.314872] system 00:01: [io 0xffff] has been reserved [ 0.314873] system 00:01: [io 0x0400-0x0453] could not be reserved [ 0.314874] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.314876] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.314877] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.314879] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.314897] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.314935] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.314938] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.314998] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.315000] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.315041] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.315043] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.315197] pnp 00:06: [dma 0 disabled] [ 0.315232] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.315391] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.315393] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.315394] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.315395] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.315397] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.315398] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.315399] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.315401] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.315402] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.315403] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.315405] system 00:07: [mem 0xf2000000-0xf2000fff] has been reserved [ 0.315407] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.315491] pnp: PnP ACPI: found 8 devices [ 0.321365] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.321433] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.321435] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.321437] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.321439] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.321442] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.321446] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff] [ 0.321469] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.321471] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.321482] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.321486] pci 0000:00:1c.1: bridge window [mem 0xf7500000-0xf75fffff] [ 0.321495] pci 0000:05:00.0: BAR 6: assigned [mem 0xf7400000-0xf740ffff pref] [ 0.321497] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.321499] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.321504] pci 0000:00:1c.3: bridge window [mem 0xf7400000-0xf74fffff] [ 0.321511] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.321515] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff] [ 0.321523] pci 0000:07:00.0: PCI bridge to [bus 08] [ 0.321526] pci 0000:07:00.0: bridge window [io 0xb000-0xbfff] [ 0.321534] pci 0000:07:00.0: bridge window [mem 0xf7200000-0xf72fffff] [ 0.321547] pci 0000:00:1c.6: PCI bridge to [bus 07-08] [ 0.321550] pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff] [ 0.321554] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff] [ 0.321562] pci 0000:00:1c.7: PCI bridge to [bus 09] [ 0.321564] pci 0000:00:1c.7: bridge window [io 0xa000-0xafff] [ 0.321568] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff] [ 0.321577] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.321578] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.321579] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.321580] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window] [ 0.321581] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window] [ 0.321582] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfeafffff window] [ 0.321584] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.321585] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.321586] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.321587] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.321588] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.321589] pci_bus 0000:04: resource 1 [mem 0xf7500000-0xf75fffff] [ 0.321591] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.321592] pci_bus 0000:05: resource 1 [mem 0xf7400000-0xf74fffff] [ 0.321593] pci_bus 0000:06: resource 1 [mem 0xf7300000-0xf73fffff] [ 0.321594] pci_bus 0000:07: resource 0 [io 0xb000-0xbfff] [ 0.321595] pci_bus 0000:07: resource 1 [mem 0xf7200000-0xf72fffff] [ 0.321596] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window] [ 0.321597] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window] [ 0.321598] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.321600] pci_bus 0000:07: resource 7 [mem 0x000d8000-0x000dbfff window] [ 0.321601] pci_bus 0000:07: resource 8 [mem 0x000dc000-0x000dffff window] [ 0.321602] pci_bus 0000:07: resource 9 [mem 0xe0000000-0xfeafffff window] [ 0.321603] pci_bus 0000:08: resource 0 [io 0xb000-0xbfff] [ 0.321604] pci_bus 0000:08: resource 1 [mem 0xf7200000-0xf72fffff] [ 0.321605] pci_bus 0000:08: resource 4 [io 0xb000-0xbfff] [ 0.321606] pci_bus 0000:08: resource 5 [mem 0xf7200000-0xf72fffff] [ 0.321607] pci_bus 0000:08: resource 6 [io 0x0000-0x0cf7 window] [ 0.321609] pci_bus 0000:08: resource 7 [io 0x0d00-0xffff window] [ 0.321610] pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.321611] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.321612] pci_bus 0000:08: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.321613] pci_bus 0000:08: resource 11 [mem 0xe0000000-0xfeafffff window] [ 0.321614] pci_bus 0000:09: resource 0 [io 0xa000-0xafff] [ 0.321615] pci_bus 0000:09: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.321637] NET: Registered protocol family 2 [ 0.321780] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.321954] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.322050] TCP: Hash tables configured (established 131072 bind 65536) [ 0.322074] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.322115] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.322173] NET: Registered protocol family 1 [ 0.574427] pci 0000:01:00.0: Video device with shadowed ROM [ 0.574669] PCI: CLS 64 bytes, default 64 [ 0.574706] Trying to unpack rootfs image as initramfs... [ 0.965061] Freeing initrd memory: 34124K (ffff880033d4a000 - ffff880035e9d000) [ 0.965100] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.965102] software IO TLB [mem 0xdab90000-0xdeb90000] (64MB) mapped at [ffff8800dab90000-ffff8800deb8ffff] [ 0.965165] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.965166] hw unit of domain pp0-core 2^-16 Joules [ 0.965167] hw unit of domain package 2^-16 Joules [ 0.965167] hw unit of domain pp1-gpu 2^-16 Joules [ 0.965293] Scanning for low memory corruption every 60 seconds [ 0.965568] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.965594] audit: initializing netlink subsys (disabled) [ 0.965603] audit: type=2000 audit(1458062176.860:1): initialized [ 0.965885] Initialise system trusted keyring [ 0.967158] zbud: loaded [ 0.967564] fuse init (API version 7.24) [ 0.967659] Key type big_key registered [ 0.967970] Key type asymmetric registered [ 0.967972] Asymmetric key parser 'x509' registered [ 0.967999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.968037] io scheduler noop registered [ 0.968040] io scheduler deadline registered (default) [ 0.968062] io scheduler cfq registered [ 0.968555] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.968559] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.968582] efifb: probing for efifb [ 0.968589] efifb: framebuffer at 0xf1000000, mapped to 0xffffc90001c00000, using 1920k, total 1920k [ 0.968590] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 0.968590] efifb: scrolling: redraw [ 0.968591] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.969413] Console: switching to colour frame buffer device 100x37 [ 0.970157] fb0: EFI VGA frame buffer device [ 0.970163] intel_idle: MWAIT substates: 0x1120 [ 0.970164] intel_idle: v0.4 model 0x2A [ 0.970165] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.970478] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.970482] ACPI: Power Button [PWRB] [ 0.970520] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.970522] ACPI: Power Button [PWRF] [ 0.971250] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.971251] ACPI: Thermal Zone [TZ00] (28 C) [ 0.971416] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.971418] ACPI: Thermal Zone [TZ01] (30 C) [ 0.971441] GHES: HEST is not enabled! [ 0.971511] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.991919] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.993376] Linux agpgart interface v0.103 [ 0.996023] brd: module loaded [ 0.997141] loop: module loaded [ 0.997301] libphy: Fixed MDIO Bus: probed [ 0.997303] tun: Universal TUN/TAP device driver, 1.6 [ 0.997304] tun: (C) 1999-2004 Max Krasnyansky [ 0.997332] PPP generic driver version 2.4.2 [ 0.997373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.997377] ehci-pci: EHCI PCI platform driver [ 0.997459] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.997464] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.997474] ehci-pci 0000:00:1a.0: debug port 2 [ 1.001373] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.001381] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7628000 [ 1.014389] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.014421] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.014422] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.014423] usb usb1: Product: EHCI Host Controller [ 1.014425] usb usb1: Manufacturer: Linux 4.5.0-040500-generic ehci_hcd [ 1.014426] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.014557] hub 1-0:1.0: USB hub found [ 1.014564] hub 1-0:1.0: 2 ports detected [ 1.014738] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.014742] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.014752] ehci-pci 0000:00:1d.0: debug port 2 [ 1.018647] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.018654] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7627000 [ 1.030384] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.030414] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.030416] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.030417] usb usb2: Product: EHCI Host Controller [ 1.030418] usb usb2: Manufacturer: Linux 4.5.0-040500-generic ehci_hcd [ 1.030419] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.030546] hub 2-0:1.0: USB hub found [ 1.030552] hub 2-0:1.0: 2 ports detected [ 1.030648] ehci-platform: EHCI generic platform driver [ 1.030657] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.030661] ohci-pci: OHCI PCI platform driver [ 1.030669] ohci-platform: OHCI generic platform driver [ 1.030675] uhci_hcd: USB Universal Host Controller Interface driver [ 1.030735] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.030739] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 1.030893] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 1.031051] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.031052] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.031053] usb usb3: Product: xHCI Host Controller [ 1.031055] usb usb3: Manufacturer: Linux 4.5.0-040500-generic xhci-hcd [ 1.031056] usb usb3: SerialNumber: 0000:04:00.0 [ 1.031175] hub 3-0:1.0: USB hub found [ 1.031185] hub 3-0:1.0: 2 ports detected [ 1.031254] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.031257] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 1.034324] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.034335] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.034336] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.034337] usb usb4: Product: xHCI Host Controller [ 1.034338] usb usb4: Manufacturer: Linux 4.5.0-040500-generic xhci-hcd [ 1.034339] usb usb4: SerialNumber: 0000:04:00.0 [ 1.034472] hub 4-0:1.0: USB hub found [ 1.034483] hub 4-0:1.0: 2 ports detected [ 1.034601] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 1.034605] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5 [ 1.034762] xhci_hcd 0000:06:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 1.034917] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.034919] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.034920] usb usb5: Product: xHCI Host Controller [ 1.034921] usb usb5: Manufacturer: Linux 4.5.0-040500-generic xhci-hcd [ 1.034922] usb usb5: SerialNumber: 0000:06:00.0 [ 1.035042] hub 5-0:1.0: USB hub found [ 1.035052] hub 5-0:1.0: 2 ports detected [ 1.035121] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 1.035124] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6 [ 1.038190] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.038201] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.038203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.038204] usb usb6: Product: xHCI Host Controller [ 1.038205] usb usb6: Manufacturer: Linux 4.5.0-040500-generic xhci-hcd [ 1.038206] usb usb6: SerialNumber: 0000:06:00.0 [ 1.038327] hub 6-0:1.0: USB hub found [ 1.038337] hub 6-0:1.0: 2 ports detected [ 1.038440] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.041115] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.041119] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.041275] mousedev: PS/2 mouse device common for all mice [ 1.041446] rtc_cmos 00:02: RTC can wake from S4 [ 1.041583] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.041608] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.041613] i2c /dev entries driver [ 1.041646] device-mapper: uevent: version 1.0.3 [ 1.041702] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.041713] Intel P-state driver initializing. [ 1.041999] ledtrig-cpu: registered to indicate activity on CPUs [ 1.042005] EFI Variables Facility v0.08 2004-May-17 [ 1.103689] NET: Registered protocol family 10 [ 1.103888] NET: Registered protocol family 17 [ 1.103895] Key type dns_resolver registered [ 1.104090] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29 [ 1.104110] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29 [ 1.104115] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29 [ 1.104152] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29 [ 1.104158] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x29 [ 1.104181] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x29 [ 1.104187] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x29 [ 1.104211] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x29 [ 1.104271] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.104455] registered taskstats version 1 [ 1.104466] Loading compiled-in X.509 certificates [ 1.104986] Loaded X.509 cert 'Build time autogenerated kernel key: e87c17e018f1352bf3cbc45e4c354f6fb3f9e5e9' [ 1.104999] zswap: loaded using pool lzo/zbud [ 1.106204] Key type trusted registered [ 1.108679] Key type encrypted registered [ 1.108683] AppArmor: AppArmor sha1 policy hashing enabled [ 1.108685] ima: No TPM chip found, activating TPM-bypass! [ 1.108697] evm: HMAC attrs: 0x1 [ 1.109043] Magic number: 8:630:289 [ 1.109059] tty tty22: hash matches [ 1.109152] rtc_cmos 00:02: setting system clock to 2016-03-15 17:16:17 UTC (1458062177) [ 1.109210] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.109211] EDD information not available. [ 1.109259] PM: Hibernation image not present or could not be loaded. [ 1.110029] Freeing unused kernel memory: 1488K (ffffffff81f46000 - ffffffff820ba000) [ 1.110029] Write protecting the kernel read-only data: 14336k [ 1.110407] Freeing unused kernel memory: 1876K (ffff88000e82b000 - ffff88000ea00000) [ 1.110500] Freeing unused kernel memory: 48K (ffff88000edf4000 - ffff88000ee00000) [ 1.116566] random: systemd-udevd urandom read with 2 bits of entropy available [ 1.134294] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.141102] pps_core: LinuxPPS API ver. 1 registered [ 1.141104] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.141937] PTP clock support registered [ 1.143746] ahci 0000:00:1f.2: version 3.0 [ 1.145396] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.145398] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.153976] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.153978] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 1.190922] scsi host0: ahci [ 1.191168] scsi host1: ahci [ 1.191413] scsi host2: ahci [ 1.191497] scsi host3: ahci [ 1.191574] scsi host4: ahci [ 1.191712] scsi host5: ahci [ 1.191754] ata1: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626100 irq 41 [ 1.191756] ata2: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626180 irq 41 [ 1.191757] ata3: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626200 irq 41 [ 1.191759] ata4: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626280 irq 41 [ 1.191761] ata5: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626300 irq 41 [ 1.191763] ata6: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626380 irq 41 [ 1.191961] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.191963] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.192021] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.192142] scsi host6: ahci [ 1.192202] scsi host7: ahci [ 1.192229] ata7: SATA max UDMA/133 abar m512@0xf7410000 port 0xf7410100 irq 19 [ 1.192232] ata8: SATA max UDMA/133 abar m512@0xf7410000 port 0xf7410180 irq 19 [ 1.192375] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.192376] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.192558] scsi host8: ahci [ 1.192623] scsi host9: ahci [ 1.192652] ata9: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110100 irq 43 [ 1.192655] ata10: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110180 irq 43 [ 1.206407] firewire_ohci 0000:08:01.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.326386] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.342384] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.346382] usb 5-1: new low-speed USB device number 2 using xhci_hcd [ 1.445715] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.445717] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f4:6d:04:96:a6:e2 [ 1.445718] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.445749] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 1.446207] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 1.458814] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.458816] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.459102] hub 1-1:1.0: USB hub found [ 1.459205] hub 1-1:1.0: 6 ports detected [ 1.474735] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.474737] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.474971] hub 2-1:1.0: USB hub found [ 1.475078] hub 2-1:1.0: 8 ports detected [ 1.500859] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.500934] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.500973] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.500975] ata7: SATA link down (SStatus 0 SControl 300) [ 1.501017] ata10: SATA link down (SStatus 0 SControl 300) [ 1.501074] ata5: SATA link down (SStatus 0 SControl 300) [ 1.501134] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.501174] ata8: SATA link down (SStatus 0 SControl 300) [ 1.501185] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.501545] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.501548] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88040e0c3fa0), AE_NOT_FOUND (20160108/psparse-542) [ 1.501740] ata1.00: supports DRM functions and may not be fully accessible [ 1.501775] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.501778] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040e0d90a0), AE_NOT_FOUND (20160108/psparse-542) [ 1.501892] ata1.00: ATA-9: ST2000DM001-1ER164, CC43, max UDMA/133 [ 1.501894] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.502049] ata3.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133 [ 1.502051] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.502465] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.502468] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88040e0c3fa0), AE_NOT_FOUND (20160108/psparse-542) [ 1.502554] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.502556] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040e0d90a0), AE_NOT_FOUND (20160108/psparse-542) [ 1.502570] ata1.00: supports DRM functions and may not be fully accessible [ 1.502696] ata1.00: configured for UDMA/133 [ 1.502776] ata3.00: configured for UDMA/133 [ 1.502861] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC43 PQ: 0 ANSI: 5 [ 1.506577] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.506580] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040e0d9208), AE_NOT_FOUND (20160108/psparse-542) [ 1.506704] ata6.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 1.506705] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.506798] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.506801] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff88040e0d9118), AE_NOT_FOUND (20160108/psparse-542) [ 1.506940] ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 1.506941] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.511889] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.511892] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff88040e0d9028), AE_NOT_FOUND (20160108/psparse-542) [ 1.512412] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.512415] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040e0d9208), AE_NOT_FOUND (20160108/psparse-542) [ 1.512533] ata6.00: configured for UDMA/133 [ 1.512619] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.512621] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff88040e0d9118), AE_NOT_FOUND (20160108/psparse-542) [ 1.512716] ata4.00: configured for UDMA/133 [ 1.512746] ata2.00: ATA-8: OCZ-AGILITY3, 2.25, max UDMA/133 [ 1.512757] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.521886] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.521888] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff88040e0d9028), AE_NOT_FOUND (20160108/psparse-542) [ 1.522740] ata2.00: configured for UDMA/133 [ 1.526537] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.526539] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.526559] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.526566] sd 0:0:0:0: [sda] Write Protect is off [ 1.526568] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.526577] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.526724] scsi 1:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.25 PQ: 0 ANSI: 5 [ 1.530285] usb 5-1: New USB device found, idVendor=046a, idProduct=0023 [ 1.530287] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.536522] hidraw: raw HID events driver (C) Jiri Kosina [ 1.562452] sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB) [ 1.562471] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.562490] sd 1:0:0:0: [sdb] Write Protect is off [ 1.562491] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.562497] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.562717] scsi 2:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5 [ 1.563340] sdb: sdb1 sdb2 sdb3 [ 1.563576] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.581070] sda: sda1 [ 1.581220] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.594308] usbcore: registered new interface driver usbhid [ 1.594309] usbhid: USB HID core driver [ 1.595448] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb5/5-1/5-1:1.0/0003:046A:0023.0001/input/input5 [ 1.598455] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.598456] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.598472] sd 2:0:0:0: [sdc] Write Protect is off [ 1.598473] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.598475] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.598480] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.598612] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 0001 PQ: 0 ANSI: 5 [ 1.604839] sdc: sdc1 [ 1.604983] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.630499] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.630520] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.630536] sd 3:0:0:0: [sdd] Write Protect is off [ 1.630539] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.630551] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.630718] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 0001 PQ: 0 ANSI: 5 [ 1.636826] sdd: sdd1 [ 1.636978] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.646418] usb 5-2: new full-speed USB device number 3 using xhci_hcd [ 1.650558] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:06:00.0-1/input0 [ 1.658426] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.660433] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb5/5-1/5-1:1.1/0003:046A:0023.0002/input/input6 [ 1.664332] ata9.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 1.664333] ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.670193] ata9.00: configured for UDMA/133 [ 1.670503] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.670518] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 1.670561] sd 5:0:0:0: [sde] Write Protect is off [ 1.670563] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.670582] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.670834] scsi 8:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 0001 PQ: 0 ANSI: 5 [ 1.702546] sd 8:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.702557] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 1.702717] sd 8:0:0:0: [sdf] Write Protect is off [ 1.702719] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.702793] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.703418] sde: sde1 [ 1.703547] sd 5:0:0:0: [sde] Attached SCSI disk [ 1.710013] sdf: sdf1 [ 1.710169] sd 8:0:0:0: [sdf] Attached SCSI removable disk [ 1.710434] firewire_core 0000:08:01.0: created device fw0: GUID 001e8c0000446dc5, S400 [ 1.714435] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:06:00.0-1/input1 [ 1.746379] usb 2-1.1: new full-speed USB device number 3 using ehci-pci [ 1.806298] usb 5-2: New USB device found, idVendor=1532, idProduct=000c [ 1.806300] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.806301] usb 5-2: Product: Razer Lachesis [ 1.806302] usb 5-2: Manufacturer: Razer [ 1.835239] input: Razer Razer Lachesis as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb5/5-2/5-2:1.0/0003:1532:000C.0003/input/input7 [ 1.835364] hid-generic 0003:1532:000C.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Lachesis] on usb-0000:06:00.0-2/input0 [ 1.835431] input: Razer Razer Lachesis as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb5/5-2/5-2:1.1/0003:1532:000C.0004/input/input8 [ 1.842051] usb 2-1.1: New USB device found, idVendor=0471, idProduct=083f [ 1.842052] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.842053] usb 2-1.1: Product: amBX (TM) device controller [ 1.842054] usb 2-1.1: Manufacturer: Philips [ 1.890483] hid-generic 0003:1532:000C.0004: input,hidraw3: USB HID v1.00 Keyboard [Razer Razer Lachesis] on usb-0000:06:00.0-2/input1 [ 1.918382] usb 2-1.2: new full-speed USB device number 4 using ehci-pci [ 1.949335] random: nonblocking pool is initialized [ 1.962373] tsc: Refined TSC clocksource calibration: 3400.023 MHz [ 1.962375] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31026473058, max_idle_ns: 440795314252 ns [ 2.014597] usb 2-1.2: New USB device found, idVendor=0471, idProduct=083f [ 2.014599] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.014600] usb 2-1.2: Product: amBX (TM) device controller [ 2.014601] usb 2-1.2: Manufacturer: Philips [ 2.086420] usb 2-1.4: new high-speed USB device number 5 using ehci-pci [ 2.180561] usb 2-1.4: New USB device found, idVendor=13fe, idProduct=5200 [ 2.180566] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.180576] usb 2-1.4: Product: USB DISK 3.0 [ 2.180577] usb 2-1.4: Manufacturer: [ 2.180578] usb 2-1.4: SerialNumber: 0703411A8E46EF53 [ 2.182849] usb-storage 2-1.4:1.0: USB Mass Storage device detected [ 2.182989] scsi host10: usb-storage 2-1.4:1.0 [ 2.183034] usbcore: registered new interface driver usb-storage [ 2.183924] usbcore: registered new interface driver uas [ 2.962433] clocksource: Switched to clocksource tsc [ 3.127984] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 3.183485] scsi 10:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 [ 3.183706] sd 10:0:0:0: Attached scsi generic sg6 type 0 [ 3.184328] sd 10:0:0:0: [sdg] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB) [ 3.184974] sd 10:0:0:0: [sdg] Write Protect is off [ 3.184986] sd 10:0:0:0: [sdg] Mode Sense: 2b 00 00 08 [ 3.185614] sd 10:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.313614] sdg: sdg1 [ 3.319953] sd 10:0:0:0: [sdg] Attached SCSI removable disk [ 3.578609] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 3.578764] systemd[1]: Detected architecture x86-64. [ 3.578997] systemd[1]: Set hostname to . [ 3.665882] systemd[1]: Reached target User and Group Name Lookups. [ 3.665922] systemd[1]: Listening on LVM2 poll daemon socket. [ 3.665989] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.666006] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.666026] systemd[1]: Listening on Journal Socket. [ 3.666041] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.666107] systemd[1]: Created slice User and Session Slice. [ 3.666143] systemd[1]: Listening on Journal Audit Socket. [ 3.666150] systemd[1]: Reached target Encrypted Volumes. [ 3.666201] systemd[1]: Created slice System Slice. [ 3.690478] systemd[1]: Starting Load Kernel Modules... [ 3.690800] systemd[1]: Mounting POSIX Message Queue File System... [ 3.691081] systemd[1]: Starting Uncomplicated firewall... [ 3.691130] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.691372] systemd[1]: Mounting Debug File System... [ 3.691631] systemd[1]: Started Read required files in advance. [ 3.691753] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.691895] systemd[1]: Created slice system-getty.slice. [ 3.692213] systemd[1]: Mounting Huge Pages File System... [ 3.692249] systemd[1]: Listening on udev Kernel Socket. [ 3.692281] systemd[1]: Listening on Syslog Socket. [ 3.692657] systemd[1]: Starting Journal Service... [ 3.693009] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 3.693024] systemd[1]: Reached target Remote File Systems (Pre). [ 3.693074] systemd[1]: Listening on udev Control Socket. [ 3.693103] systemd[1]: Reached target Remote File Systems. [ 3.693207] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.693414] systemd[1]: Listening on LVM2 metadata daemon socket. [ 3.693429] systemd[1]: Reached target Slices. [ 3.693793] systemd[1]: Starting Braille Device Support... [ 3.701507] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3.701748] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3.702645] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 3.704099] systemd[1]: Started Uncomplicated firewall. [ 3.715669] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.719783] systemd[1]: Mounted Huge Pages File System. [ 3.719847] systemd[1]: Mounted Debug File System. [ 3.719889] systemd[1]: Mounted POSIX Message Queue File System. [ 3.721648] lp: driver loaded but no devices found [ 3.723968] ppdev: user-space parallel port driver [ 3.729086] systemd[1]: Started Load Kernel Modules. [ 3.729511] systemd[1]: Starting Apply Kernel Variables... [ 3.729886] systemd[1]: Mounting FUSE Control File System... [ 3.731146] systemd[1]: Mounted FUSE Control File System. [ 3.743577] systemd[1]: Started Journal Service. [ 3.775472] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 3.786036] systemd-journald[372]: Received request to flush runtime journal from PID 1 [ 3.830276] wmi: Mapper loaded [ 3.856913] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.857780] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160108/utaddress-255) [ 3.857785] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.857788] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255) [ 3.857791] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160108/utaddress-255) [ 3.857794] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.857795] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255) [ 3.857798] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160108/utaddress-255) [ 3.857800] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.857801] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255) [ 3.857804] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160108/utaddress-255) [ 3.857807] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.857808] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.886834] [drm] Initialized drm 1.1.0 20060810 [ 3.909715] snd_virtuoso 0000:03:04.0: enabling device (0000 -> 0001) [ 3.913647] AVX version of gcm_enc/dec engaged. [ 3.913649] AES CTR mode by8 optimization enabled [ 3.920081] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 3.920245] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 3.920265] snd_hda_intel 0000:01:00.1: Disabling MSI [ 3.920269] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 3.941720] intel_rapl: Found RAPL domain package [ 3.941722] intel_rapl: Found RAPL domain core [ 3.941725] intel_rapl: RAPL package 0 domain package locked by BIOS [ 3.962870] asus_wmi: ASUS WMI generic driver loaded [ 3.964210] nvidia: module license 'NVIDIA' taints kernel. [ 3.964212] Disabling lock debugging due to kernel taint [ 3.964643] asus_wmi: Initialization: 0x0 [ 3.964668] asus_wmi: BIOS WMI version: 0.9 [ 3.964708] asus_wmi: SFUN value: 0x0 [ 3.964975] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9 [ 3.965066] asus_wmi: Number of fans: 1 [ 3.966879] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 3.969535] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 3.969581] nvidia-nvlink: Nvlink Core is being initialized, major device number 243 [ 3.969658] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 3.969660] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 361.28 Wed Feb 3 15:48:04 PST 2016 [ 3.983949] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 361.28 Wed Feb 3 15:15:17 PST 2016 [ 3.985420] Adding 16740348k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:16740348k SSFS [ 3.994290] nvidia-uvm: Loaded the UVM driver in lite mode, major device number 242 [ 4.418907] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10 [ 4.418948] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11 [ 4.418978] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12 [ 4.419009] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input13 [ 4.473010] EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem [ 4.493370] EXT4-fs (sdb2): mounting ext2 file system using the ext4 subsystem [ 4.494262] EXT4-fs (sdb2): mounted filesystem without journal. Opts: (null) [ 4.523204] EXT4-fs (sdd1): warning: mounting fs with errors, running e2fsck is recommended [ 4.551060] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 4.562333] audit: type=1400 audit(1458062180.945:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=830 comm="apparmor_parser" [ 4.562336] audit: type=1400 audit(1458062180.945:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=830 comm="apparmor_parser" [ 4.564126] audit: type=1400 audit(1458062180.949:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=830 comm="apparmor_parser" [ 4.564129] audit: type=1400 audit(1458062180.949:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=830 comm="apparmor_parser" [ 4.564132] audit: type=1400 audit(1458062180.949:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=830 comm="apparmor_parser" [ 4.564141] audit: type=1400 audit(1458062180.949:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=830 comm="apparmor_parser" [ 4.572703] audit: type=1400 audit(1458062180.957:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=830 comm="apparmor_parser" [ 4.572706] audit: type=1400 audit(1458062180.957:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=830 comm="apparmor_parser" [ 4.572709] audit: type=1400 audit(1458062180.957:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=830 comm="apparmor_parser" [ 4.586047] NVRM: Your system is not currently configured to drive a VGA console [ 4.586050] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 4.586052] NVRM: requires the use of a text-mode VGA console. Use of other console [ 4.586053] NVRM: drivers including, but not limited to, vesafb, may result in [ 4.586054] NVRM: corruption and stability problems, and is not supported. [ 4.711483] cgroup: new mount options do not match the existing superblock, will be ignored [ 4.943398] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 5.202552] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 6.942437] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000 [ 7.950473] snd_hda_intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x300f0000 [ 8.320373] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 8.320406] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 8.954469] snd_hda_intel 0000:00:1b.0: Codec #3 probe error; disabling it... [ 8.969820] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 8.969823] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.969825] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.969826] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 8.969827] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e [ 8.969828] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 8.969830] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 8.969832] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 8.969833] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 8.982890] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 8.982948] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 8.983002] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 8.983052] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 8.983104] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 8.983154] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 8.983205] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 8.983255] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 [ 9.811456] nvidia-modeset: Allocated GPU:0 (GPU-88a3b1f1-d2f8-d311-cb84-4fe4b641fbda) @ PCI:0000:01:00.0 [ 15.052517] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 16.020983] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm owncloud: deleted inode referenced: 48758820 [ 16.040632] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm owncloud: deleted inode referenced: 48758834 [ 16.048917] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm owncloud: deleted inode referenced: 48758838 [ 17.679216] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm owncloud: deleted inode referenced: 48758820 [ 17.696596] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm owncloud: deleted inode referenced: 48758834 [ 17.704853] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm owncloud: deleted inode referenced: 48758838 [ 305.220522] EXT4-fs (sdd1): error count since last fsck: 105 [ 305.220540] EXT4-fs (sdd1): initial error at time 1457974361: ext4_lookup:1602: inode 48758815 [ 305.220549] EXT4-fs (sdd1): last error at time 1458062194: ext4_lookup:1602: inode 48758815 [ 368.113744] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758837 [ 368.130634] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758819 [ 368.139220] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758831 [ 368.147191] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758820 [ 368.156747] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758817 [ 368.163613] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758834 [ 368.173876] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758832 [ 368.180771] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758838 [ 368.188427] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758833 [ 368.196846] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758818 [ 437.562554] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758837 [ 437.580015] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758819 [ 437.588971] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758831 [ 437.596618] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758820 [ 437.606852] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758817 [ 437.612905] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758834 [ 437.625026] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758832 [ 437.630207] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758838 [ 437.637739] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758833 [ 437.646127] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758818 [ 497.526245] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758837 [ 497.540678] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758819 [ 497.549185] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758831 [ 497.557267] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758820 [ 497.566874] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758817 [ 497.573710] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758834 [ 497.584001] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758832 [ 497.590946] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758838 [ 497.598557] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758833 [ 497.606957] EXT4-fs error (device sdd1): ext4_lookup:1602: inode #48758815: comm CSync_Neon_Thre: deleted inode referenced: 48758818 [ 794.531432] show_signal_msg: 39 callbacks suppressed [ 794.531436] Danganronpa[2861]: segfault at a40 ip 00007f740a5d4989 sp 00007f7402cf8ed8 error 4 in libGL.so.1.0.0[7f740a5c8000+32000]