[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-20-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #58-Ubuntu SMP Fri Mar 12 04:38:19 UTC 2010 (Ubuntu 2.6.31-20.58-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=41cd30dd-2003-4449-b294-6071c05ce744 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000057e90000 (usable) [ 0.000000] BIOS-e820: 0000000057e90000 - 0000000057e9c000 (ACPI data) [ 0.000000] BIOS-e820: 0000000057e9c000 - 0000000057f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000057f00000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x57e90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0058000000 mask FFF8000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000057e90000 (usable) [ 0.000000] modified: 0000000057e90000 - 0000000057e9c000 (ACPI data) [ 0.000000] modified: 0000000057e9c000 - 0000000057f00000 (ACPI NVS) [ 0.000000] modified: 0000000057f00000 - 0000000060000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000057e90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0057e00000 page 2M [ 0.000000] 0057e00000 - 0057e90000 page 4k [ 0.000000] kernel direct mapping tables up to 57e90000 @ 8000-c000 [ 0.000000] RAMDISK: 3786e000 - 37fef6f7 [ 0.000000] ACPI: RSDP 00000000000f8a20 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 0000000057e94c0d 0003C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 0000000057e9bc57 00074 (v01 ATI Bowfin 06040000 ATI 000F4240) [ 0.000000] ACPI: DSDT 0000000057e94c49 0700E (v01 ATI SB460 06040000 MSFT 02000002) [ 0.000000] ACPI: FACS 0000000057e9cfc0 00040 [ 0.000000] ACPI: SSDT 0000000057e9bccb 00115 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 0000000057e9bde0 00046 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: MCFG 0000000057e9be26 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 0000000057e9be62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 0000000057e9be8a 00176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000057e90000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000057e90000 [ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff] [ 0.000000] bootmap [000000000000f000 - 0000000000019fd7] pages b [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0057e90000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e8c8c] TEXT DATA BSS ==> [0001000000 - 00019e8c8c] [ 0.000000] #3 [003786e000 - 0037fef6f7] RAMDISK ==> [003786e000 - 0037fef6f7] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [00019e9000 - 00019e91ac] BRK ==> [00019e9000 - 00019e91ac] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000f8a50] f8a50 [ 0.000000] [ffffea0000000000-ffffea00013fffff] PMD -> [ffff880001e00000-ffff8800031fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00057e90 [ 0.000000] On node 0 totalpages: 359976 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3833 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4867 pages used for memmap [ 0.000000] DMA32 zone: 351117 pages, LIFO batch:31 [ 0.000000] SB4X0 revision 0x83 [ 0.000000] Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:80000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff8800019fa000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 354950 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=41cd30dd-2003-4449-b294-6071c05ce744 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ a9fe000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1401296k/1440320k available (5327k kernel code, 416k absent, 38608k reserved, 3014k data, 664k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.352 MHz processor. [ 0.000015] spurious 8259A interrupt: IRQ7. [ 0.000896] Console: colour VGA+ 80x25 [ 0.000900] console [tty0] enabled [ 0.010000] allocated 14417920 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.70 BogoMIPS (lpj=20003520) [ 0.010043] Security Framework initialized [ 0.010070] AppArmor: AppArmor initialized [ 0.010291] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012303] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.013279] Mount-cache hash table entries: 256 [ 0.013457] Initializing cgroup subsys ns [ 0.013462] Initializing cgroup subsys cpuacct [ 0.013466] Initializing cgroup subsys memory [ 0.013479] Initializing cgroup subsys freezer [ 0.013482] Initializing cgroup subsys net_cls [ 0.013495] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.013498] CPU: L2 Cache: 512K (64 bytes/line) [ 0.013501] CPU 0/0x0 -> Node 0 [ 0.013503] tseg: 0057f00000 [ 0.013506] mce: CPU supports 5 MCE banks [ 0.013519] using C1E aware idle routine [ 0.013520] Performance Counters: AMD PMU driver. [ 0.013525] ... version: 0 [ 0.013527] ... bit width: 48 [ 0.013529] ... generic counters: 4 [ 0.013531] ... value mask: 0000ffffffffffff [ 0.013532] ... max period: 00007fffffffffff [ 0.013534] ... fixed-purpose counters: 0 [ 0.013536] ... counter mask: 000000000000000f [ 0.013550] SMP alternatives: switching to UP code [ 0.023692] Freeing SMP alternatives: 40k freed [ 0.023740] ACPI: Core revision 20090521 [ 0.040080] Setting APIC routing to flat [ 0.040426] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.145865] CPU0: AMD Turion(tm) 64 Mobile Technology MK-36 stepping 02 [ 0.150000] Brought up 1 CPUs [ 0.150000] Total of 1 processors activated (4000.70 BogoMIPS). [ 0.150000] CPU0 attaching NULL sched-domain. [ 0.150000] Booting paravirtualized kernel on bare hardware [ 0.150000] regulator: core version 0.5 [ 0.150000] Time: 2:29:08 Date: 03/31/10 [ 0.150000] NET: Registered protocol family 16 [ 0.150000] node 0 link 0: io port [1000, fffff] [ 0.150000] TOM: 0000000060000000 aka 1536M [ 0.150000] node 0 link 0: mmio [d0000000, dfffffff] [ 0.150000] node 0 link 0: mmio [c8000000, cfffffff] [ 0.150000] node 0 link 0: mmio [a0000, bffff] [ 0.150000] node 0 link 0: mmio [f0000000, ffffffff] [ 0.150000] node 0 link 0: mmio [e0000000, efffffff] [ 0.150000] node 0 link 0: mmio [60000000, c7ffffff] [ 0.150000] bus: [00,ff] on node 0 link 0 [ 0.150000] bus: 00 index 0 io port: [0, ffff] [ 0.150000] bus: 00 index 1 mmio: [60000000, efffffff] [ 0.150000] bus: 00 index 2 mmio: [a0000, bffff] [ 0.150000] bus: 00 index 3 mmio: [f0000000, fcffffffff] [ 0.150000] ACPI: bus type pci registered [ 0.150000] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8 [ 0.150000] PCI: MCFG area at e0000000 reserved in E820 [ 0.150000] PCI: Using MMCONFIG at e0000000 - e08fffff [ 0.150000] PCI: Using configuration type 1 for base access [ 0.150000] bio: create slab at 0 [ 0.150000] ACPI: EC: Look up EC in DSDT [ 0.150000] ACPI: BIOS _OSI(Linux) query ignored [ 0.150000] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.190275] ACPI: Interpreter enabled [ 0.190275] ACPI: (supports S0 S3 S4 S5) [ 0.190275] ACPI: Using IOAPIC for interrupt routing [ 0.202696] ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62 [ 0.202699] ACPI: EC: driver started in interrupt mode [ 0.202899] ACPI: No dock devices found. [ 0.203868] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.203980] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.203983] pci 0000:00:04.0: PME# disabled [ 0.204015] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.204018] pci 0000:00:05.0: PME# disabled [ 0.204052] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.204055] pci 0000:00:06.0: PME# disabled [ 0.204086] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.204089] pci 0000:00:07.0: PME# disabled [ 0.204161] pci 0000:00:12.0: reg 10 io port: [0x8440-0x8447] [ 0.204170] pci 0000:00:12.0: reg 14 io port: [0x8434-0x8437] [ 0.204178] pci 0000:00:12.0: reg 18 io port: [0x8438-0x843f] [ 0.204187] pci 0000:00:12.0: reg 1c io port: [0x8430-0x8433] [ 0.204195] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f] [ 0.204204] pci 0000:00:12.0: reg 24 32bit mmio: [0xc0004000-0xc00041ff] [ 0.204213] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.204245] pci 0000:00:12.0: supports D1 D2 [ 0.204293] pci 0000:00:13.0: reg 10 32bit mmio: [0xc0005000-0xc0005fff] [ 0.204399] pci 0000:00:13.1: reg 10 32bit mmio: [0xc0006000-0xc0006fff] [ 0.204513] pci 0000:00:13.2: reg 10 32bit mmio: [0xc0007000-0xc0007fff] [ 0.204580] pci 0000:00:13.2: supports D1 D2 [ 0.204582] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.204588] pci 0000:00:13.2: PME# disabled [ 0.204641] pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f] [ 0.204649] pci 0000:00:14.0: reg 14 32bit mmio: [0xfed00000-0xfed003ff] [ 0.204685] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.204748] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7] [ 0.204756] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7] [ 0.204765] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.204773] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.204782] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f] [ 0.204880] pci 0000:00:14.2: reg 10 64bit mmio: [0xc0000000-0xc0003fff] [ 0.204942] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.204947] pci 0000:00:14.2: PME# disabled [ 0.205164] pci 0000:01:05.0: reg 10 32bit mmio: [0xc8000000-0xcfffffff] [ 0.205168] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff] [ 0.205172] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff] [ 0.205181] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.205189] pci 0000:01:05.0: supports D1 D2 [ 0.205206] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.205209] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff] [ 0.205213] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff] [ 0.205273] pci 0000:00:04.0: bridge io port: [0x00-0xfff] [ 0.205276] pci 0000:00:04.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.205335] pci 0000:00:05.0: bridge io port: [0x00-0xfff] [ 0.205338] pci 0000:00:05.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.205396] pci 0000:00:06.0: bridge io port: [0x00-0xfff] [ 0.205399] pci 0000:00:06.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.205458] pci 0000:00:07.0: bridge io port: [0x00-0xfff] [ 0.205461] pci 0000:00:07.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.205522] pci 0000:08:01.0: reg 10 32bit mmio: [0xc0210000-0xc0210fff] [ 0.205553] pci 0000:08:01.0: supports D1 D2 [ 0.205555] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.205561] pci 0000:08:01.0: PME# disabled [ 0.205617] pci 0000:08:01.1: reg 10 32bit mmio: [0xc0211000-0xc021107f] [ 0.205695] pci 0000:08:01.1: supports D1 D2 [ 0.205697] pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot [ 0.205703] pci 0000:08:01.1: PME# disabled [ 0.205758] pci 0000:08:01.2: reg 10 32bit mmio: [0xc0211400-0xc02114ff] [ 0.205837] pci 0000:08:01.2: supports D1 D2 [ 0.205839] pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot [ 0.205845] pci 0000:08:01.2: PME# disabled [ 0.205901] pci 0000:08:01.3: reg 10 32bit mmio: [0xc0211800-0xc021187f] [ 0.205979] pci 0000:08:01.3: supports D1 D2 [ 0.205981] pci 0000:08:01.3: PME# supported from D0 D1 D2 D3hot [ 0.205987] pci 0000:08:01.3: PME# disabled [ 0.206043] pci 0000:08:01.4: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.206120] pci 0000:08:01.4: supports D1 D2 [ 0.206122] pci 0000:08:01.4: PME# supported from D0 D1 D2 D3hot [ 0.206128] pci 0000:08:01.4: PME# disabled [ 0.206189] pci 0000:08:02.0: reg 10 io port: [0xa000-0xa0ff] [ 0.206199] pci 0000:08:02.0: reg 14 32bit mmio: [0xc0211c00-0xc0211cff] [ 0.206267] pci 0000:08:02.0: supports D1 D2 [ 0.206269] pci 0000:08:02.0: PME# supported from D1 D2 D3hot D3cold [ 0.206275] pci 0000:08:02.0: PME# disabled [ 0.206333] pci 0000:08:04.0: reg 10 32bit mmio: [0xc0200000-0xc020ffff] [ 0.206472] pci 0000:00:14.4: transparent bridge [ 0.206480] pci 0000:00:14.4: bridge io port: [0xa000-0xafff] [ 0.206485] pci 0000:00:14.4: bridge 32bit mmio: [0xc0200000-0xc02fffff] [ 0.206537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.206637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.206699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.206762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 0.206823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 0.206908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.206987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.210229] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 0.210338] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 0.210445] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.210552] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 0.210659] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 0.210767] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 0.210873] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.210980] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 0.211086] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 0.211279] SCSI subsystem initialized [ 0.211362] libata version 3.00 loaded. [ 0.211444] usbcore: registered new interface driver usbfs [ 0.211458] usbcore: registered new interface driver hub [ 0.211485] usbcore: registered new device driver usb [ 0.211667] ACPI: WMI: Mapper loaded [ 0.211669] PCI: Using ACPI for IRQ routing [ 0.211677] pci 0000:00:04.0: BAR 13: can't allocate resource [ 0.211679] pci 0000:00:04.0: BAR 14: can't allocate resource [ 0.211681] pci 0000:00:05.0: BAR 13: can't allocate resource [ 0.211684] pci 0000:00:05.0: BAR 14: can't allocate resource [ 0.211686] pci 0000:00:06.0: BAR 13: can't allocate resource [ 0.211688] pci 0000:00:06.0: BAR 14: can't allocate resource [ 0.211691] pci 0000:00:07.0: BAR 13: can't allocate resource [ 0.211693] pci 0000:00:07.0: BAR 14: can't allocate resource [ 0.211885] Bluetooth: Core ver 2.15 [ 0.211916] NET: Registered protocol family 31 [ 0.211918] Bluetooth: HCI device and connection manager initialized [ 0.211922] Bluetooth: HCI socket layer initialized [ 0.211924] NetLabel: Initializing [ 0.211925] NetLabel: domain hash size = 128 [ 0.211927] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.211942] NetLabel: unlabeled traffic allowed by default [ 0.214150] pnp: PnP ACPI init [ 0.214173] ACPI: bus type pnp registered [ 0.216529] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6 (0x0-0x7ffff), disabling [ 0.216540] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling [ 0.216625] pnp: PnP ACPI: found 10 devices [ 0.216627] ACPI: ACPI bus type pnp unregistered [ 0.216639] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.216642] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.216646] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.216654] system 00:08: ioport range 0x1080-0x1080 has been reserved [ 0.216657] system 00:08: ioport range 0x220-0x22f has been reserved [ 0.216660] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.216667] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.216671] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.216674] system 00:08: ioport range 0x530-0x537 has been reserved [ 0.216677] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.216680] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.216683] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 0.216686] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.216689] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.216693] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 0.216696] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.216699] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 0.216702] system 00:08: ioport range 0x8000-0x805f has been reserved [ 0.216705] system 00:08: ioport range 0xf40-0xf47 has been reserved [ 0.216709] system 00:08: ioport range 0x87f-0x87f has been reserved [ 0.216714] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.216718] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.221468] AppArmor: AppArmor Filesystem Enabled [ 0.221520] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.221523] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.221528] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff [ 0.221531] pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff [ 0.221536] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.221538] pci 0000:00:04.0: IO window: disabled [ 0.221540] pci 0000:00:04.0: MEM window: disabled [ 0.221543] pci 0000:00:04.0: PREFETCH window: disabled [ 0.221546] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03 [ 0.221548] pci 0000:00:05.0: IO window: disabled [ 0.221551] pci 0000:00:05.0: MEM window: disabled [ 0.221554] pci 0000:00:05.0: PREFETCH window: disabled [ 0.221557] pci 0000:00:06.0: PCI bridge, secondary bus 0000:06 [ 0.221559] pci 0000:00:06.0: IO window: disabled [ 0.221562] pci 0000:00:06.0: MEM window: disabled [ 0.221564] pci 0000:00:06.0: PREFETCH window: disabled [ 0.221567] pci 0000:00:07.0: PCI bridge, secondary bus 0000:07 [ 0.221569] pci 0000:00:07.0: IO window: disabled [ 0.221572] pci 0000:00:07.0: MEM window: disabled [ 0.221575] pci 0000:00:07.0: PREFETCH window: disabled [ 0.221588] pci 0000:08:01.0: CardBus bridge, secondary bus 0000:09 [ 0.221591] pci 0000:08:01.0: IO window: 0x00a400-0x00a4ff [ 0.221597] pci 0000:08:01.0: IO window: 0x00a800-0x00a8ff [ 0.221603] pci 0000:08:01.0: PREFETCH window: 0x60000000-0x63ffffff [ 0.221610] pci 0000:08:01.0: MEM window: 0x68000000-0x6bffffff [ 0.221616] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08 [ 0.221620] pci 0000:00:14.4: IO window: 0xa000-0xafff [ 0.221627] pci 0000:00:14.4: MEM window: 0xc0200000-0xc02fffff [ 0.221632] pci 0000:00:14.4: PREFETCH window: 0x60000000-0x63ffffff [ 0.221646] pci 0000:00:04.0: setting latency timer to 64 [ 0.221651] pci 0000:00:05.0: setting latency timer to 64 [ 0.221656] pci 0000:00:06.0: setting latency timer to 64 [ 0.221661] pci 0000:00:07.0: setting latency timer to 64 [ 0.221676] pci 0000:08:01.0: enabling device (0000 -> 0003) [ 0.221683] alloc irq_desc for 23 on node 0 [ 0.221686] alloc kstat_irqs on node 0 [ 0.221692] pci 0000:08:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.221702] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.221705] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.221708] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.221711] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff] [ 0.221713] pci_bus 0000:01: resource 2 pref mem [0xc8000000-0xcfffffff] [ 0.221716] pci_bus 0000:02: resource 0 mem: [0x0-0xfff] [ 0.221719] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff] [ 0.221721] pci_bus 0000:03: resource 0 mem: [0x0-0xfff] [ 0.221724] pci_bus 0000:03: resource 1 mem: [0x0-0xfffff] [ 0.221726] pci_bus 0000:06: resource 0 mem: [0x0-0xfff] [ 0.221729] pci_bus 0000:06: resource 1 mem: [0x0-0xfffff] [ 0.221731] pci_bus 0000:07: resource 0 mem: [0x0-0xfff] [ 0.221734] pci_bus 0000:07: resource 1 mem: [0x0-0xfffff] [ 0.221736] pci_bus 0000:08: resource 0 io: [0xa000-0xafff] [ 0.221739] pci_bus 0000:08: resource 1 mem: [0xc0200000-0xc02fffff] [ 0.221742] pci_bus 0000:08: resource 2 pref mem [0x60000000-0x63ffffff] [ 0.221744] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 0.221747] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.221750] pci_bus 0000:09: resource 0 io: [0xa400-0xa4ff] [ 0.221752] pci_bus 0000:09: resource 1 io: [0xa800-0xa8ff] [ 0.221755] pci_bus 0000:09: resource 2 pref mem [0x60000000-0x63ffffff] [ 0.221758] pci_bus 0000:09: resource 3 mem: [0x68000000-0x6bffffff] [ 0.221800] NET: Registered protocol family 2 [ 0.221939] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.222992] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.226874] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.227814] TCP: Hash tables configured (established 262144 bind 65536) [ 0.227818] TCP reno registered [ 0.227931] NET: Registered protocol family 1 [ 0.227998] Trying to unpack rootfs image as initramfs... [ 0.429929] Freeing initrd memory: 7685k freed [ 0.436241] Simple Boot Flag at 0x36 set to 0x1 [ 0.436393] Scanning for low memory corruption every 60 seconds [ 0.436554] audit: initializing netlink socket (disabled) [ 0.436573] type=2000 audit(1270002548.429:1): initialized [ 0.446015] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.447404] VFS: Disk quotas dquot_6.5.2 [ 0.447461] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.448081] fuse init (API version 7.12) [ 0.448166] msgmni has been set to 2752 [ 0.448376] alg: No test for stdrng (krng) [ 0.448389] io scheduler noop registered [ 0.448391] io scheduler anticipatory registered [ 0.448393] io scheduler deadline registered [ 0.448437] io scheduler cfq registered (default) [ 0.448447] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.448523] pci 0000:01:05.0: Boot video device [ 0.448681] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 0.448760] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 0.448834] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 0.448908] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 0.448972] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.448995] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.451340] ACPI: AC Adapter [ACAD] (off-line) [ 0.451406] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.451410] ACPI: Power Button [PWRF] [ 0.451459] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.451461] ACPI: Power Button [PWRB] [ 0.451515] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.454314] ACPI: Lid Switch [LID] [ 0.454361] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 0.454363] ACPI: Sleep Button [SLPB] [ 0.454569] processor LNXCPU:00: registered as cooling_device0 [ 0.461822] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.461829] ACPI: Thermal Zone [THRM] (35 C) [ 0.462934] Linux agpgart interface v0.103 [ 0.462943] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.464092] brd: module loaded [ 0.464517] loop: module loaded [ 0.464601] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.464982] ACPI: Battery Slot [BAT1] (battery absent) [ 0.465059] sata_sil 0000:00:12.0: version 2.4 [ 0.465101] sata_sil 0000:00:12.0: enabling device (0005 -> 0007) [ 0.465109] alloc irq_desc for 22 on node 0 [ 0.465111] alloc kstat_irqs on node 0 [ 0.465118] sata_sil 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.465210] scsi0 : sata_sil [ 0.465320] scsi1 : sata_sil [ 0.465674] ata1: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc0004080 irq 22 [ 0.465678] ata2: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc00040c0 irq 22 [ 0.465926] alloc irq_desc for 16 on node 0 [ 0.465928] alloc kstat_irqs on node 0 [ 0.465933] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.465998] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 0.466088] scsi2 : pata_atiixp [ 0.466150] scsi3 : pata_atiixp [ 0.466263] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14 [ 0.466266] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15 [ 0.466901] Fixed MDIO Bus: probed [ 0.466938] PPP generic driver version 2.4.2 [ 0.467047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.467101] alloc irq_desc for 19 on node 0 [ 0.467104] alloc kstat_irqs on node 0 [ 0.467110] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.467134] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.467173] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 0.467246] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0007000 [ 0.479997] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.480121] usb usb1: configuration #1 chosen from 1 choice [ 0.480150] hub 1-0:1.0: USB hub found [ 0.480160] hub 1-0:1.0: 8 ports detected [ 0.480263] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.480534] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.480557] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.480601] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.480626] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0005000 [ 0.540039] usb usb2: configuration #1 chosen from 1 choice [ 0.540066] hub 2-0:1.0: USB hub found [ 0.540079] hub 2-0:1.0: 4 ports detected [ 0.540178] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.540191] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.540223] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.540242] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0006000 [ 0.600022] usb usb3: configuration #1 chosen from 1 choice [ 0.600047] hub 3-0:1.0: USB hub found [ 0.600061] hub 3-0:1.0: 4 ports detected [ 0.600130] uhci_hcd: USB Universal Host Controller Interface driver [ 0.600257] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.602249] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.604239] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.604245] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.604249] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.604252] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.604255] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.604317] mice: PS/2 mouse device common for all mice [ 0.604451] rtc_cmos 00:04: RTC can wake from S4 [ 0.604495] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.604526] rtc0: alarms up to one month, 114 bytes nvram [ 0.604651] device-mapper: uevent: version 1.0.3 [ 0.604746] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.604835] device-mapper: multipath: version 1.1.0 loaded [ 0.604849] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.604974] cpuidle: using governor ladder [ 0.604976] cpuidle: using governor menu [ 0.605421] TCP cubic registered [ 0.605547] NET: Registered protocol family 10 [ 0.605988] lo: Disabled Privacy Extensions [ 0.606271] NET: Registered protocol family 17 [ 0.606294] Bluetooth: L2CAP ver 2.13 [ 0.606296] Bluetooth: L2CAP socket layer initialized [ 0.606299] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.606301] Bluetooth: SCO socket layer initialized [ 0.606337] Bluetooth: RFCOMM TTY layer initialized [ 0.606340] Bluetooth: RFCOMM socket layer initialized [ 0.606342] Bluetooth: RFCOMM ver 1.11 [ 0.606360] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-36 processors (1 cpu cores) (version 2.20.00) [ 0.606415] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x10 [ 0.606418] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12 [ 0.606420] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 [ 0.606422] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18 [ 0.606533] PM: Resume from disk failed. [ 0.606552] registered taskstats version 1 [ 0.606710] Magic number: 2:446:461 [ 0.606807] rtc_cmos 00:04: setting system clock to 2010-03-31 02:29:09 UTC (1270002549) [ 0.606811] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.606813] EDD information not available. [ 0.636619] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.640567] ata3.00: ATAPI: PIONEER DVD-RW DVR-K17RS, 1.00, max UDMA/33 [ 0.680977] ata3.00: configured for UDMA/33 [ 0.729921] Switched to high resolution mode on CPU 0 [ 0.800011] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 0.952558] usb 1-3: configuration #1 chosen from 1 choice [ 0.990039] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.010491] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 [ 1.010494] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.050510] ata1.00: configured for UDMA/100 [ 1.050620] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 [ 1.050738] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.050778] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.050821] sd 0:0:0:0: [sda] Write Protect is off [ 1.050823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.050845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.050968] sda: [ 1.400025] ata2: SATA link down (SStatus 0 SControl 310) [ 1.406591] scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17RS 1.00 PQ: 0 ANSI: 5 [ 1.424817] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.424820] Uniform CD-ROM driver Revision: 3.20 [ 1.424910] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.424952] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.444730] sda1 sda2 < sda5 > [ 1.467604] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.580089] Freeing unused kernel memory: 664k freed [ 1.580520] Write protecting the kernel read-only data: 7596k [ 1.882247] [drm] Initialized drm 1.1.0 20060810 [ 1.919665] [drm] radeon default to kernel modesetting DISABLED. [ 1.919822] alloc irq_desc for 17 on node 0 [ 1.919825] alloc kstat_irqs on node 0 [ 1.919834] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.919974] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0 [ 1.924322] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.924676] 8139cp 0000:08:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.927564] 8139too Fast Ethernet driver 0.9.28 [ 1.928316] alloc irq_desc for 20 on node 0 [ 1.928320] alloc kstat_irqs on node 0 [ 1.928328] 8139too 0000:08:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.929895] eth0: RealTek RTL8139 at 0xa000, 00:16:36:bf:cd:77, IRQ 20 [ 2.677212] PM: Starting manual resume from disk [ 2.677217] PM: Resume from partition 8:5 [ 2.677219] PM: Checking hibernation image. [ 2.677413] PM: Resume from disk failed. [ 2.707132] EXT4-fs (sda1): barriers enabled [ 2.727511] kjournald2 starting: pid 367, dev sda1:8, commit interval 5 seconds [ 2.727551] EXT4-fs (sda1): delayed allocation enabled [ 2.727554] EXT4-fs: file extents enabled [ 2.738044] EXT4-fs: mballoc enabled [ 2.738062] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.566968] type=1505 audit(1270002552.453:2): operation="profile_load" pid=391 name=/usr/share/gdm/guest-session/Xsession [ 3.569504] type=1505 audit(1270002552.453:3): operation="profile_load" pid=392 name=/sbin/dhclient3 [ 3.569805] type=1505 audit(1270002552.453:4): operation="profile_load" pid=392 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.569976] type=1505 audit(1270002552.453:5): operation="profile_load" pid=392 name=/usr/lib/connman/scripts/dhclient-script [ 3.622626] type=1505 audit(1270002552.513:6): operation="profile_load" pid=393 name=/usr/bin/evince [ 3.627720] type=1505 audit(1270002552.513:7): operation="profile_load" pid=393 name=/usr/bin/evince-previewer [ 3.630802] type=1505 audit(1270002552.523:8): operation="profile_load" pid=393 name=/usr/bin/evince-thumbnailer [ 3.652265] type=1505 audit(1270002552.543:9): operation="profile_load" pid=395 name=/usr/lib/cups/backend/cups-pdf [ 4.675873] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k [ 5.148357] EXT4-fs (sda1): internal journal on sda1:8 [ 5.891228] udev: starting version 147 [ 7.114941] acer-wmi: Acer Laptop ACPI-WMI Extras [ 7.457172] lp: driver loaded but no devices found [ 7.605154] Linux video capture interface: v2.00 [ 7.615748] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 7.646025] gspca: main v2.6.0 registered [ 7.707441] EDAC MC: Ver: 2.1.0 Mar 12 2010 [ 7.716256] EDAC amd64_edac: Ver: 3.2.0 Mar 12 2010 [ 7.716349] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 7.716353] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 7.716356] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 7.716358] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 7.716359] Might be a BIOS bug, if BIOS says ECC is enabled [ 7.716361] Use of the override can cause unknown side effects. [ 7.716390] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 7.802663] cfg80211: Calling CRDA to update world regulatory domain [ 7.808460] sdhci: Secure Digital Host Controller Interface driver [ 7.808463] sdhci: Copyright(c) Pierre Ossman [ 7.925891] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0 [ 7.945635] alloc irq_desc for 21 on node 0 [ 7.945638] alloc kstat_irqs on node 0 [ 7.945647] ath5k 0000:08:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 7.945711] ath5k 0000:08:04.0: registered as 'phy0' [ 8.604334] gspca: probing 0c45:6260 [ 8.663405] ath: EEPROM regdomain: 0x63 [ 8.663409] ath: EEPROM indicates we should expect a direct regpair map [ 8.663414] ath: Country alpha2 being used: 00 [ 8.663416] ath: Regpair used: 0x63 [ 8.750806] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.796173] phy0: Selected rate control algorithm 'minstrel' [ 8.796837] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) [ 8.797479] sdhci-pci 0000:08:01.2: SDHCI controller found [1524:0550] (rev 1) [ 8.797501] sdhci-pci 0000:08:01.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 8.797585] Registered led device: mmc0:: [ 8.797627] mmc0: SDHCI controller on PCI [0000:08:01.2] using PIO [ 8.797698] sdhci-pci 0000:08:01.4: SDHCI controller found [1524:0551] (rev 1) [ 8.797713] sdhci-pci 0000:08:01.4: enabling device (0000 -> 0002) [ 8.797719] sdhci-pci 0000:08:01.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 8.797760] Registered led device: mmc1:: [ 8.797791] mmc1: SDHCI controller on PCI [0000:08:01.4] using PIO [ 8.874801] sn9c20x: OV7670 sensor detected [ 8.874888] gspca: probe ok [ 8.874910] usbcore: registered new interface driver sn9c20x [ 8.874914] sn9c20x: registered [ 8.882157] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 8.925078] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 9.183128] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.269685] yenta_cardbus 0000:08:01.0: CardBus bridge found [1025:010f] [ 9.269717] yenta_cardbus 0000:08:01.0: Using CSCINT to route CSC interrupts to PCI [ 9.269720] yenta_cardbus 0000:08:01.0: Routing CardBus interrupts to PCI [ 9.269727] yenta_cardbus 0000:08:01.0: TI: mfunc 0x00001202, devctl 0x44 [ 9.483489] cfg80211: World regulatory domain updated: [ 9.483493] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.483497] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.483500] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.483503] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.483505] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.483508] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.510835] yenta_cardbus 0000:08:01.0: ISA IRQ mask 0x0cf8, PCI irq 23 [ 9.510841] yenta_cardbus 0000:08:01.0: Socket status: 30000006 [ 9.510845] pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c [ 9.510857] yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 9.510861] yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff [ 9.510865] yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff [ 10.087323] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.299028] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 10.299234] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7 [ 13.183136] __ratelimit: 6 callbacks suppressed [ 13.183140] type=1505 audit(1270002562.073:12): operation="profile_replace" pid=879 name=/usr/share/gdm/guest-session/Xsession [ 13.185194] type=1505 audit(1270002562.073:13): operation="profile_replace" pid=880 name=/sbin/dhclient3 [ 13.185507] type=1505 audit(1270002562.073:14): operation="profile_replace" pid=880 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 13.185688] type=1505 audit(1270002562.073:15): operation="profile_replace" pid=880 name=/usr/lib/connman/scripts/dhclient-script [ 13.194220] type=1505 audit(1270002562.083:16): operation="profile_replace" pid=881 name=/usr/bin/evince [ 13.199365] type=1505 audit(1270002562.083:17): operation="profile_replace" pid=881 name=/usr/bin/evince-previewer [ 13.202428] type=1505 audit(1270002562.093:18): operation="profile_replace" pid=881 name=/usr/bin/evince-thumbnailer [ 13.209643] type=1505 audit(1270002562.093:19): operation="profile_replace" pid=883 name=/usr/lib/cups/backend/cups-pdf [ 13.210060] type=1505 audit(1270002562.103:20): operation="profile_replace" pid=883 name=/usr/sbin/cupsd [ 13.213449] type=1505 audit(1270002562.103:21): operation="profile_replace" pid=884 name=/usr/sbin/tcpdump [ 14.004464] eth0: link down [ 14.004872] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.144824] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.726439] usplash:330 freeing invalid memtype ffffffffc8000000-ffffffffc9000000 [ 18.395355] ppdev: user-space parallel port driver [ 19.423323] [drm] Setting GART location based on new memory map [ 19.423822] [drm] Loading R300 Microcode [ 19.423844] [drm] Num pipes: 4 [ 19.423851] [drm] writeback test succeeded in 1 usecs [ 36.023283] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0 [ 65.909966] wlan0: Selected IBSS BSSID d2:8e:37:10:cc:bd based on configured SSID [ 65.937539] ath5k phy0: bf=ffff88004aa56d00 bf_skb=(null) [ 75.230024] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 75.451041] usb 3-1: configuration #1 chosen from 1 choice [ 75.509035] Initializing USB Mass Storage driver... [ 75.510271] scsi4 : SCSI emulation for USB Mass Storage devices [ 75.510400] usbcore: registered new interface driver usb-storage [ 75.510403] USB Mass Storage support registered. [ 75.518198] usb-storage: device found at 2 [ 75.518203] usb-storage: waiting for device to settle before scanning [ 75.540047] usb 3-1: USB disconnect, address 2 [ 76.850005] wlan0: no IPv6 routers present [ 77.130029] usb 3-1: new full speed USB device using ohci_hcd and address 3 [ 77.351103] usb 3-1: configuration #1 chosen from 1 choice [ 77.361058] scsi7 : SCSI emulation for USB Mass Storage devices [ 77.368692] usb-storage: device found at 3 [ 77.368696] usb-storage: waiting for device to settle before scanning [ 77.390179] usbcore: registered new interface driver usbserial [ 77.390196] USB Serial support registered for generic [ 77.390233] usbcore: registered new interface driver usbserial_generic [ 77.390236] usbserial: USB Serial Driver core [ 77.409017] USB Serial support registered for GSM modem (1-port) [ 77.409056] option 3-1:1.0: GSM modem (1-port) converter detected [ 77.409156] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 77.409168] option 3-1:1.1: GSM modem (1-port) converter detected [ 77.409218] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 77.409236] usbcore: registered new interface driver option [ 77.409238] option: v0.7.2:USB Driver for GSM modems [ 80.620207] Marking TSC unstable due to cpufreq changes [ 80.720040] Clocksource tsc unstable (delta = -68963361 ns) [ 82.360408] usb-storage: device scan complete [ 82.364353] scsi 7:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 82.399360] sr1: scsi-1 drive [ 82.399736] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 82.399904] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 87.839968] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 87.852368] ISOFS: changing to secondary root [ 123.487597] wlan0: Trigger new scan to find an IBSS to join [ 127.040061] wlan0: Trigger new scan to find an IBSS to join [ 131.047827] wlan0: Trigger new scan to find an IBSS to join [ 132.332475] wlan0: Creating new IBSS network, BSSID 26:45:f6:89:f4:46 [ 135.040060] wlan0: Trigger new scan to find an IBSS to join [ 140.040060] wlan0: Trigger new scan to find an IBSS to join [ 141.298139] wlan0: Creating new IBSS network, BSSID e2:03:65:d2:99:c3 [ 144.043867] wlan0: Trigger new scan to find an IBSS to join [ 149.040045] wlan0: Trigger new scan to find an IBSS to join [ 150.235828] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 150.267513] wlan0: Creating new IBSS network, BSSID 52:8a:75:25:3e:64 [ 151.114525] usb 3-1: USB disconnect, address 3 [ 151.115311] option: option_instat_callback: error -108 [ 151.115680] VFS: busy inodes on changed media or resized disk sr1 [ 151.116006] VFS: busy inodes on changed media or resized disk sr1 [ 151.118319] VFS: busy inodes on changed media or resized disk sr1 [ 151.121986] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 151.122022] option 3-1:1.0: device disconnected [ 151.122320] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 151.122362] option 3-1:1.1: device disconnected [ 151.148217] modem-manager[869]: segfault at 33 ip 00007fc39692e357 sp 00007fffd05dc518 error 6 in libdbus-1.so.3.4.0[7fc396908000+3d000] [ 151.328482] scsi 7:0:0:0: rejecting I/O to dead device [ 154.040105] wlan0: Trigger new scan to find an IBSS to join [ 159.040062] wlan0: Trigger new scan to find an IBSS to join [ 160.152429] wlan0: Creating new IBSS network, BSSID 6e:c1:8b:79:2f:63 [ 164.040075] wlan0: Trigger new scan to find an IBSS to join [ 167.490044] usb 3-1: new full speed USB device using ohci_hcd and address 4 [ 167.711293] usb 3-1: configuration #1 chosen from 1 choice [ 167.719491] scsi8 : SCSI emulation for USB Mass Storage devices [ 167.719836] usb 3-1: USB disconnect, address 4 [ 167.719943] usb-storage: device found at 4 [ 167.719948] usb-storage: waiting for device to settle before scanning [ 168.040105] wlan0: Creating new IBSS network, BSSID ea:f9:3d:65:25:00 [ 169.330050] usb 3-1: new full speed USB device using ohci_hcd and address 5 [ 169.551361] usb 3-1: configuration #1 chosen from 1 choice [ 169.559324] option 3-1:1.0: GSM modem (1-port) converter detected [ 169.559538] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 169.561185] option 3-1:1.1: GSM modem (1-port) converter detected [ 169.561327] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 169.562596] scsi11 : SCSI emulation for USB Mass Storage devices [ 169.616797] usb-storage: device found at 5 [ 169.616807] usb-storage: waiting for device to settle before scanning [ 170.040056] wlan0: Trigger new scan to find an IBSS to join [ 174.611252] usb-storage: device scan complete [ 174.615196] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 174.649169] sr1: scsi-1 drive [ 174.649484] sr 11:0:0:0: Attached scsi CD-ROM sr1 [ 174.649647] sr 11:0:0:0: Attached scsi generic sg2 type 5 [ 175.040056] wlan0: Trigger new scan to find an IBSS to join [ 176.136598] wlan0: Creating new IBSS network, BSSID 3a:10:50:98:bf:e6 [ 180.040056] wlan0: Trigger new scan to find an IBSS to join [ 181.744179] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 181.756208] ISOFS: changing to secondary root [ 185.040051] wlan0: Trigger new scan to find an IBSS to join [ 186.136154] wlan0: Creating new IBSS network, BSSID 5a:28:5f:8b:81:4d [ 186.439777] PPP BSD Compression module registered [ 186.459546] PPP Deflate Compression module registered [ 190.040066] wlan0: Trigger new scan to find an IBSS to join [ 195.046838] wlan0: Trigger new scan to find an IBSS to join [ 196.138296] wlan0: Creating new IBSS network, BSSID 1a:98:d7:d3:d7:9e [ 200.040061] wlan0: Trigger new scan to find an IBSS to join [ 205.040081] wlan0: Trigger new scan to find an IBSS to join [ 206.166281] wlan0: Creating new IBSS network, BSSID 9a:00:7d:18:22:28 [ 210.040041] wlan0: Trigger new scan to find an IBSS to join [ 215.040134] wlan0: Trigger new scan to find an IBSS to join [ 216.237896] wlan0: Creating new IBSS network, BSSID c6:0c:b1:ce:27:04 [ 220.040073] wlan0: Trigger new scan to find an IBSS to join [ 225.040065] wlan0: Trigger new scan to find an IBSS to join [ 226.146567] wlan0: Creating new IBSS network, BSSID 06:9d:a3:ed:94:d5 [ 230.040053] wlan0: Trigger new scan to find an IBSS to join [ 235.040039] wlan0: Trigger new scan to find an IBSS to join [ 236.144571] wlan0: Creating new IBSS network, BSSID 42:e2:17:c6:c0:8a [ 240.040061] wlan0: Trigger new scan to find an IBSS to join [ 245.040068] wlan0: Trigger new scan to find an IBSS to join [ 246.134625] wlan0: Creating new IBSS network, BSSID 12:73:3d:f6:c8:b3 [ 250.040078] wlan0: Trigger new scan to find an IBSS to join [ 255.040045] wlan0: Trigger new scan to find an IBSS to join [ 256.268145] wlan0: Creating new IBSS network, BSSID be:94:b7:39:3e:11 [ 260.040076] wlan0: Trigger new scan to find an IBSS to join [ 265.040061] wlan0: Trigger new scan to find an IBSS to join [ 266.161977] wlan0: Creating new IBSS network, BSSID 7a:ef:44:23:16:f9 [ 270.040071] wlan0: Trigger new scan to find an IBSS to join [ 275.047582] wlan0: Trigger new scan to find an IBSS to join [ 276.147279] wlan0: Creating new IBSS network, BSSID fe:6c:47:f5:9e:1b [ 280.050474] wlan0: Trigger new scan to find an IBSS to join [ 285.040046] wlan0: Trigger new scan to find an IBSS to join [ 286.145190] wlan0: Creating new IBSS network, BSSID 62:a6:5e:41:56:54 [ 290.040043] wlan0: Trigger new scan to find an IBSS to join [ 295.040046] wlan0: Trigger new scan to find an IBSS to join [ 296.158509] wlan0: Creating new IBSS network, BSSID 32:1f:88:79:8e:5e [ 300.040049] wlan0: Trigger new scan to find an IBSS to join [ 305.040045] wlan0: Trigger new scan to find an IBSS to join [ 306.146859] wlan0: Creating new IBSS network, BSSID 46:9d:9e:ab:79:ce [ 310.040051] wlan0: Trigger new scan to find an IBSS to join [ 315.040047] wlan0: Trigger new scan to find an IBSS to join [ 316.136332] wlan0: Creating new IBSS network, BSSID 7e:fa:c1:f0:1b:90 [ 320.040055] wlan0: Trigger new scan to find an IBSS to join [ 325.040047] wlan0: Trigger new scan to find an IBSS to join [ 326.158705] wlan0: Creating new IBSS network, BSSID 62:73:fa:56:aa:41 [ 330.040050] wlan0: Trigger new scan to find an IBSS to join [ 335.045331] wlan0: Trigger new scan to find an IBSS to join [ 336.170435] wlan0: Creating new IBSS network, BSSID 7a:29:7d:af:62:1e [ 340.040055] wlan0: Trigger new scan to find an IBSS to join [ 345.040062] wlan0: Trigger new scan to find an IBSS to join [ 346.146624] wlan0: Creating new IBSS network, BSSID 56:a9:15:db:83:4e [ 350.040067] wlan0: Trigger new scan to find an IBSS to join [ 355.040066] wlan0: Trigger new scan to find an IBSS to join [ 356.150063] wlan0: Creating new IBSS network, BSSID 66:16:fd:03:80:9a [ 360.040066] wlan0: Trigger new scan to find an IBSS to join [ 365.040056] wlan0: Trigger new scan to find an IBSS to join [ 366.190075] wlan0: Creating new IBSS network, BSSID ee:80:e7:13:fd:b6 [ 370.043761] wlan0: Trigger new scan to find an IBSS to join [ 375.040043] wlan0: Trigger new scan to find an IBSS to join [ 376.148833] wlan0: Creating new IBSS network, BSSID aa:dd:77:f1:54:ab [ 380.040053] wlan0: Trigger new scan to find an IBSS to join [ 385.040044] wlan0: Trigger new scan to find an IBSS to join [ 386.160193] wlan0: Creating new IBSS network, BSSID 0e:bb:18:e4:25:79 [ 390.040043] wlan0: Trigger new scan to find an IBSS to join [ 395.040046] wlan0: Trigger new scan to find an IBSS to join [ 396.209571] wlan0: Creating new IBSS network, BSSID 6e:93:00:0f:af:0e [ 400.040075] wlan0: Trigger new scan to find an IBSS to join [ 405.041138] wlan0: Trigger new scan to find an IBSS to join [ 406.155876] wlan0: Creating new IBSS network, BSSID 46:b8:5a:65:7e:bd [ 410.040043] wlan0: Trigger new scan to find an IBSS to join [ 415.040044] wlan0: Trigger new scan to find an IBSS to join [ 416.145372] wlan0: Creating new IBSS network, BSSID 26:cd:5f:7f:a6:06 [ 420.047444] wlan0: Trigger new scan to find an IBSS to join [ 425.045495] wlan0: Trigger new scan to find an IBSS to join [ 426.159022] wlan0: Creating new IBSS network, BSSID 5a:79:e6:8e:c6:0c [ 430.049331] wlan0: Trigger new scan to find an IBSS to join [ 435.040054] wlan0: Trigger new scan to find an IBSS to join [ 436.153005] wlan0: Creating new IBSS network, BSSID 2e:33:7f:7e:c9:5f [ 440.042608] wlan0: Trigger new scan to find an IBSS to join [ 445.040052] wlan0: Trigger new scan to find an IBSS to join [ 446.208082] wlan0: Creating new IBSS network, BSSID b6:47:b7:35:e7:98 [ 450.049146] wlan0: Trigger new scan to find an IBSS to join [ 455.040052] wlan0: Trigger new scan to find an IBSS to join [ 456.231085] wlan0: Creating new IBSS network, BSSID c6:c7:3b:6b:47:07 [ 460.040049] wlan0: Trigger new scan to find an IBSS to join [ 465.040040] wlan0: Trigger new scan to find an IBSS to join [ 466.150739] wlan0: Creating new IBSS network, BSSID 2e:35:9e:a8:8f:a7 [ 470.040049] wlan0: Trigger new scan to find an IBSS to join [ 475.040045] wlan0: Trigger new scan to find an IBSS to join [ 476.158600] wlan0: Creating new IBSS network, BSSID 96:f8:af:7f:69:86 [ 480.040054] wlan0: Trigger new scan to find an IBSS to join [ 485.043176] wlan0: Trigger new scan to find an IBSS to join [ 486.157483] wlan0: Creating new IBSS network, BSSID 72:40:42:ac:01:8c [ 490.040062] wlan0: Trigger new scan to find an IBSS to join [ 495.044240] wlan0: Trigger new scan to find an IBSS to join [ 496.247368] wlan0: Creating new IBSS network, BSSID 46:0b:68:d3:88:82 [ 500.040052] wlan0: Trigger new scan to find an IBSS to join [ 505.040047] wlan0: Trigger new scan to find an IBSS to join [ 506.207904] wlan0: Creating new IBSS network, BSSID c2:b9:eb:cf:ff:9c [ 510.040060] wlan0: Trigger new scan to find an IBSS to join [ 515.040051] wlan0: Trigger new scan to find an IBSS to join [ 516.168498] wlan0: Creating new IBSS network, BSSID 96:7c:b5:43:3a:25 [ 520.040074] wlan0: Trigger new scan to find an IBSS to join [ 525.040046] wlan0: Trigger new scan to find an IBSS to join [ 526.167905] wlan0: Creating new IBSS network, BSSID 16:09:fe:d1:c2:20 [ 530.040043] wlan0: Trigger new scan to find an IBSS to join [ 535.046004] wlan0: Trigger new scan to find an IBSS to join [ 536.259641] wlan0: Creating new IBSS network, BSSID 62:f2:44:a0:e5:4d [ 540.040980] wlan0: Trigger new scan to find an IBSS to join [ 545.040053] wlan0: Trigger new scan to find an IBSS to join [ 546.162705] wlan0: Creating new IBSS network, BSSID ca:01:1a:4b:67:e3 [ 550.048092] wlan0: Trigger new scan to find an IBSS to join [ 555.040045] wlan0: Trigger new scan to find an IBSS to join [ 556.166777] wlan0: Creating new IBSS network, BSSID 4e:f9:45:78:28:a5 [ 560.040040] wlan0: Trigger new scan to find an IBSS to join [ 565.040052] wlan0: Trigger new scan to find an IBSS to join [ 566.147655] wlan0: Creating new IBSS network, BSSID ae:62:7f:6f:7e:54 [ 570.043023] wlan0: Trigger new scan to find an IBSS to join [ 573.480075] usb 1-5: new high speed USB device using ehci_hcd and address 7 [ 573.635904] usb 1-5: configuration #1 chosen from 1 choice [ 573.639918] scsi12 : SCSI emulation for USB Mass Storage devices [ 573.640255] usb-storage: device found at 7 [ 573.640260] usb-storage: waiting for device to settle before scanning [ 575.046001] wlan0: Trigger new scan to find an IBSS to join [ 576.159456] wlan0: Creating new IBSS network, BSSID 8e:0a:f4:3b:88:d2 [ 578.640306] usb-storage: device scan complete [ 578.641016] scsi 12:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 578.642013] sd 12:0:0:0: Attached scsi generic sg3 type 0 [ 579.895910] sd 12:0:0:0: [sdb] 4014080 512-byte logical blocks: (2.05 GB/1.91 GiB) [ 579.896387] sd 12:0:0:0: [sdb] Write Protect is off [ 579.896395] sd 12:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 579.896403] sd 12:0:0:0: [sdb] Assuming drive cache: write through [ 579.902900] sd 12:0:0:0: [sdb] Assuming drive cache: write through [ 579.902913] sdb: sdb1 sdb2 [ 579.931414] sd 12:0:0:0: [sdb] Assuming drive cache: write through [ 579.931433] sd 12:0:0:0: [sdb] Attached SCSI removable disk [ 580.040085] wlan0: Trigger new scan to find an IBSS to join [ 585.044592] wlan0: Trigger new scan to find an IBSS to join [ 586.194236] wlan0: Creating new IBSS network, BSSID fe:b4:fe:8a:11:ab [ 590.040061] wlan0: Trigger new scan to find an IBSS to join [ 595.040077] wlan0: Trigger new scan to find an IBSS to join [ 596.161565] wlan0: Creating new IBSS network, BSSID ce:a8:b2:54:14:28 [ 600.040066] wlan0: Trigger new scan to find an IBSS to join [ 605.040070] wlan0: Trigger new scan to find an IBSS to join [ 606.189360] wlan0: Creating new IBSS network, BSSID 02:55:62:71:3a:78 [ 610.040056] wlan0: Trigger new scan to find an IBSS to join [ 615.040141] wlan0: Trigger new scan to find an IBSS to join [ 616.189782] wlan0: Creating new IBSS network, BSSID 12:94:2d:c0:52:17 [ 620.040051] wlan0: Trigger new scan to find an IBSS to join [ 624.040136] wlan0: Trigger new scan to find an IBSS to join [ 625.158075] wlan0: Creating new IBSS network, BSSID 7e:46:db:e1:77:02 [ 629.040070] wlan0: Trigger new scan to find an IBSS to join [ 634.040067] wlan0: Trigger new scan to find an IBSS to join [ 635.167652] wlan0: Creating new IBSS network, BSSID 6a:56:7e:04:a2:6e [ 639.043879] wlan0: Trigger new scan to find an IBSS to join [ 644.040065] wlan0: Trigger new scan to find an IBSS to join [ 645.165257] wlan0: Creating new IBSS network, BSSID 8a:6c:f4:05:8f:9b [ 649.040050] wlan0: Trigger new scan to find an IBSS to join [ 654.040046] wlan0: Trigger new scan to find an IBSS to join [ 655.159079] wlan0: Creating new IBSS network, BSSID 72:b2:4a:e2:b1:bb [ 659.045554] wlan0: Trigger new scan to find an IBSS to join [ 664.040076] wlan0: Trigger new scan to find an IBSS to join [ 665.174436] wlan0: Creating new IBSS network, BSSID 72:a5:24:0d:ce:ff [ 669.040058] wlan0: Trigger new scan to find an IBSS to join [ 674.040059] wlan0: Trigger new scan to find an IBSS to join [ 675.187821] wlan0: Creating new IBSS network, BSSID b2:98:aa:b8:b3:b0 [ 679.044937] wlan0: Trigger new scan to find an IBSS to join [ 684.049193] wlan0: Trigger new scan to find an IBSS to join [ 685.177817] wlan0: Creating new IBSS network, BSSID 8e:af:58:6c:1a:a2 [ 689.050959] wlan0: Trigger new scan to find an IBSS to join [ 694.040064] wlan0: Trigger new scan to find an IBSS to join [ 695.173225] wlan0: Creating new IBSS network, BSSID e6:b5:d1:bc:b1:ee [ 699.044900] wlan0: Trigger new scan to find an IBSS to join [ 704.048685] wlan0: Trigger new scan to find an IBSS to join [ 705.175135] wlan0: Creating new IBSS network, BSSID ea:d5:ff:1d:64:42 [ 709.045574] wlan0: Trigger new scan to find an IBSS to join [ 714.040052] wlan0: Trigger new scan to find an IBSS to join [ 715.172732] wlan0: Creating new IBSS network, BSSID be:f1:12:76:d3:c0 [ 719.040043] wlan0: Trigger new scan to find an IBSS to join [ 724.042626] wlan0: Trigger new scan to find an IBSS to join [ 725.147572] wlan0: Creating new IBSS network, BSSID 16:f4:19:68:e0:b8 [ 729.040930] wlan0: Trigger new scan to find an IBSS to join [ 734.040793] wlan0: Trigger new scan to find an IBSS to join [ 735.161025] wlan0: Creating new IBSS network, BSSID 1e:02:4f:94:4b:76 [ 739.040033] wlan0: Trigger new scan to find an IBSS to join [ 744.049316] wlan0: Trigger new scan to find an IBSS to join [ 745.190058] wlan0: Creating new IBSS network, BSSID ba:d8:03:fd:a1:31 [ 749.043100] wlan0: Trigger new scan to find an IBSS to join [ 754.050150] wlan0: Trigger new scan to find an IBSS to join [ 755.260212] wlan0: Creating new IBSS network, BSSID a6:63:ec:2c:ef:32 [ 759.040062] wlan0: Trigger new scan to find an IBSS to join [ 764.040042] wlan0: Trigger new scan to find an IBSS to join [ 765.147352] wlan0: Creating new IBSS network, BSSID ca:41:99:d9:f7:ac [ 769.040040] wlan0: Trigger new scan to find an IBSS to join [ 774.040048] wlan0: Trigger new scan to find an IBSS to join [ 775.195396] wlan0: Creating new IBSS network, BSSID fa:a9:a7:91:e7:c0 [ 779.053552] wlan0: Trigger new scan to find an IBSS to join [ 784.040059] wlan0: Trigger new scan to find an IBSS to join [ 785.176391] wlan0: Creating new IBSS network, BSSID b6:9a:96:db:d8:b0 [ 789.040079] wlan0: Trigger new scan to find an IBSS to join [ 794.040074] wlan0: Trigger new scan to find an IBSS to join [ 795.159113] wlan0: Creating new IBSS network, BSSID c2:31:8d:27:17:d8 [ 799.040074] wlan0: Trigger new scan to find an IBSS to join [ 804.045900] wlan0: Trigger new scan to find an IBSS to join [ 805.184714] wlan0: Creating new IBSS network, BSSID d6:7f:37:5f:c9:53 [ 809.040426] wlan0: Trigger new scan to find an IBSS to join [ 814.040061] wlan0: Trigger new scan to find an IBSS to join [ 815.159907] wlan0: Creating new IBSS network, BSSID 9a:ad:8c:01:a6:a3 [ 819.040048] wlan0: Trigger new scan to find an IBSS to join [ 824.042240] wlan0: Trigger new scan to find an IBSS to join [ 825.200263] wlan0: Creating new IBSS network, BSSID 16:3e:3c:4f:be:5f [ 829.040060] wlan0: Trigger new scan to find an IBSS to join [ 834.050235] wlan0: Trigger new scan to find an IBSS to join [ 835.180135] wlan0: Creating new IBSS network, BSSID 96:27:c7:14:c4:7d [ 839.040039] wlan0: Trigger new scan to find an IBSS to join [ 844.045193] wlan0: Trigger new scan to find an IBSS to join [ 845.137590] wlan0: Creating new IBSS network, BSSID c6:d0:64:d4:49:25 [ 849.046876] wlan0: Trigger new scan to find an IBSS to join [ 854.040399] wlan0: Trigger new scan to find an IBSS to join [ 855.182191] wlan0: Creating new IBSS network, BSSID 42:a8:5a:1a:e4:8e [ 859.050118] wlan0: Trigger new scan to find an IBSS to join