[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001dff0000 (usable) [ 0.000000] BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1dff0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001dff0000 (usable) [ 0.000000] modified: 000000001dff0000 - 000000001dffffc0 (ACPI data) [ 0.000000] modified: 000000001dffffc0 - 000000001e000000 (ACPI NVS) [ 0.000000] modified: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 1dff0000 @ 10000-16000 [ 0.000000] RAMDISK: 1d937000 - 1dfdf797 [ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00) [ 0.000000] ACPI: RSDT 1DFFCE90, 0030 (r1 INSYDE RSDT_000 1 _CSI 10103) [ 0.000000] ACPI: FACP 1DFFFB00, 0074 (r1 INSYDE FACP_000 100 _CSI 10103) [ 0.000000] ACPI: DSDT 1DFFCED0, 2C27 (r1 MTC___ winner__ 1004 INTL 2002025) [ 0.000000] ACPI: FACS 1DFFFFC0, 0040 [ 0.000000] ACPI: BOOT 1DFFFB90, 0028 (r1 INSYDE SYS_BOOT 100 _CSI 10103) [ 0.000000] ACPI: DBGP 1DFFFBC0, 0034 (r1 INSYDE DBGP_000 100 _CSI 10103) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 479MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1dff0000 [ 0.000000] low ram: 00000000 - 1dff0000 [ 0.000000] bootmap 00012000 - 00015c00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001dff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac] [ 0.000000] #4 [001d937000 - 001dfdf797] RAMDISK ==> [001d937000 - 001dfdf797] [ 0.000000] #5 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000] [ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001dff0 [ 0.000000] HighMem 0x0001dff0 -> 0x0001dff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0001dff0 [ 0.000000] On node 0 totalpages: 122741 [ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 [ 0.000000] Normal zone: 928 pages used for memmap [ 0.000000] Normal zone: 117840 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e1b80000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121781 [ 0.000000] Kernel command line: root=UUID=98f0c4eb-8548-4f98-87fe-f58dcec2aed3 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1296.734 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] allocated 2457280 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 469496k/491456k available (4115k kernel code, 21224k reserved, 2199k data, 532k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xde7f0000 - 0xff3fe000 ( 524 MB) [ 0.004000] lowmem : 0xc0000000 - 0xddff0000 ( 479 MB) [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) [ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB) [ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.46 BogoMIPS (lpj=5186936) [ 0.004037] Security Framework initialized [ 0.004047] SELinux: Disabled at boot. [ 0.004074] AppArmor: AppArmor initialized [ 0.004084] Mount-cache hash table entries: 512 [ 0.004253] Initializing cgroup subsys ns [ 0.004259] Initializing cgroup subsys cpuacct [ 0.004263] Initializing cgroup subsys memory [ 0.004268] Initializing cgroup subsys freezer [ 0.004286] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004290] CPU: L2 cache: 1024K [ 0.004305] Checking 'hlt' instruction... OK. [ 0.020883] SMP alternatives: switching to UP code [ 0.168646] Freeing SMP alternatives: 18k freed [ 0.168652] ACPI: Core revision 20080926 [ 0.172877] ACPI: Checking initramfs for custom DSDT [ 0.600846] ACPI: setting ELCR to 0200 (from 0ca8) [ 0.604075] weird, boot CPU (#0) not listedby the BIOS. [ 0.604079] SMP motherboard not detected. [ 0.604083] Local APIC not detected. Using dummy APIC emulation. [ 0.604086] SMP disabled [ 0.604408] Brought up 1 CPUs [ 0.604412] Total of 1 processors activated (2593.46 BogoMIPS). [ 0.604429] CPU0 attaching NULL sched-domain. [ 0.604796] net_namespace: 776 bytes [ 0.604814] Booting paravirtualized kernel on bare hardware [ 0.605110] Time: 20:04:34 Date: 08/23/09 [ 0.605117] regulator: core version 0.5 [ 0.605163] NET: Registered protocol family 16 [ 0.605338] EISA bus registered [ 0.605366] ACPI: bus type pci registered [ 0.605485] PCI: PCI BIOS revision 2.10 entry at 0xe9854, last bus=1 [ 0.605488] PCI: Using configuration type 1 for base access [ 0.607379] ACPI: EC: Look up EC in DSDT [ 0.608839] ACPI: Interpreter enabled [ 0.608847] ACPI: (supports S0 S3 S4 S5) [ 0.608872] ACPI: Using PIC for interrupt routing [ 0.610488] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.623105] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.623108] ACPI: EC: driver started in interrupt mode [ 0.623243] ACPI: No dock devices found. [ 0.623255] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.623402] pci 0000:00:02.0: reg 10 32bit mmio: [0xb0000000-0xb7ffffff] [ 0.623408] pci 0000:00:02.0: reg 14 32bit mmio: [0xf0000000-0xf007ffff] [ 0.623414] pci 0000:00:02.0: reg 18 io port: [0xe000-0xe007] [ 0.623432] pci 0000:00:02.0: supports D1 [ 0.623453] pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x7ffffff] [ 0.623459] pci 0000:00:02.1: reg 14 32bit mmio: [0x000000-0x07ffff] [ 0.623478] pci 0000:00:02.1: supports D1 [ 0.623548] pci 0000:00:1d.0: reg 20 io port: [0x1200-0x121f] [ 0.623596] pci 0000:00:1d.1: reg 20 io port: [0x1600-0x161f] [ 0.623653] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff000-0xfebff3ff] [ 0.623695] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.623701] pci 0000:00:1d.7: PME# disabled [ 0.624049] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.624057] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.624061] pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH4 GPIO [ 0.624082] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.624089] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.624097] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.624104] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.624112] pci 0000:00:1f.1: reg 20 io port: [0x1100-0x110f] [ 0.624119] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.624166] pci 0000:00:1f.3: reg 20 io port: [0x1400-0x141f] [ 0.624206] pci 0000:00:1f.5: reg 10 io port: [0xe100-0xe1ff] [ 0.624213] pci 0000:00:1f.5: reg 14 io port: [0xe200-0xe23f] [ 0.624221] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf0080400-0xf00805ff] [ 0.624229] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf0080600-0xf00806ff] [ 0.624250] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.624255] pci 0000:00:1f.5: PME# disabled [ 0.624283] pci 0000:00:1f.6: reg 10 io port: [0xe300-0xe3ff] [ 0.624290] pci 0000:00:1f.6: reg 14 io port: [0xe400-0xe47f] [ 0.624319] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.624324] pci 0000:00:1f.6: PME# disabled [ 0.624363] pci 0000:01:01.0: reg 10 32bit mmio: [0xe0002000-0xe0003fff] [ 0.624398] pci 0000:01:01.0: supports D1 D2 [ 0.624401] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.624406] pci 0000:01:01.0: PME# disabled [ 0.624435] pci 0000:01:02.0: reg 10 io port: [0xc100-0xc1ff] [ 0.624443] pci 0000:01:02.0: reg 14 32bit mmio: [0xe0000000-0xe00000ff] [ 0.624473] pci 0000:01:02.0: supports D1 D2 [ 0.624476] pci 0000:01:02.0: PME# supported from D1 D2 D3hot D3cold [ 0.624481] pci 0000:01:02.0: PME# disabled [ 0.624512] pci 0000:01:04.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.624522] pci 0000:01:04.0: supports D1 D2 [ 0.624525] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.624530] pci 0000:01:04.0: PME# disabled [ 0.624572] pci 0000:00:1e.0: transparent bridge [ 0.624578] pci 0000:00:1e.0: bridge io port: [0xc000-0xdfff] [ 0.624584] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xefffffff] [ 0.624590] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xa0000000-0xafffffff] [ 0.624614] bus 00 -> node 0 [ 0.624622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.624712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.627826] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *10 11) [ 0.627978] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 11) [ 0.628142] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 10 *11) [ 0.628290] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 10 *11) [ 0.628430] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 10 11) [ 0.628549] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 10 11) *0, disabled. [ 0.628668] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 10 11) *0, disabled. [ 0.628803] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 10 11) *7 [ 0.628962] ACPI: WMI: Mapper loaded [ 0.629188] SCSI subsystem initialized [ 0.629245] libata version 3.00 loaded. [ 0.629307] usbcore: registered new interface driver usbfs [ 0.629330] usbcore: registered new interface driver hub [ 0.629364] usbcore: registered new device driver usb [ 0.629515] PCI: Using ACPI for IRQ routing [ 0.629622] Bluetooth: Core ver 2.13 [ 0.629622] NET: Registered protocol family 31 [ 0.629622] Bluetooth: HCI device and connection manager initialized [ 0.629622] Bluetooth: HCI socket layer initialized [ 0.629622] NET: Registered protocol family 8 [ 0.629622] NET: Registered protocol family 20 [ 0.629622] NetLabel: Initializing [ 0.629622] NetLabel: domain hash size = 128 [ 0.629622] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.629622] NetLabel: unlabeled traffic allowed by default [ 0.629622] AppArmor: AppArmor Filesystem Enabled [ 0.629622] pnp: PnP ACPI init [ 0.629622] ACPI: bus type pnp registered [ 0.636691] pnp: PnP ACPI: found 10 devices [ 0.636694] ACPI: ACPI bus type pnp unregistered [ 0.636701] PnPBIOS: Disabled by ACPI PNP [ 0.636717] system 00:05: iomem range 0xfff80000-0xffffffff has been reserved [ 0.636726] system 00:07: ioport range 0x680-0x6ff has been reserved [ 0.636730] system 00:07: ioport range 0x200-0x20f has been reserved [ 0.636733] system 00:07: ioport range 0x290-0x297 has been reserved [ 0.636737] system 00:07: ioport range 0x1000-0x107f has been reserved [ 0.636741] system 00:07: ioport range 0x1300-0x133f has been reserved [ 0.636745] system 00:07: ioport range 0x77c-0x77f has been reserved [ 0.671503] pci 0000:01:04.0: CardBus bridge, secondary bus 0000:02 [ 0.671507] pci 0000:01:04.0: IO window: 0x00c000-0x00c0ff [ 0.671512] pci 0000:01:04.0: IO window: 0x00c400-0x00c4ff [ 0.671518] pci 0000:01:04.0: PREFETCH window: 0xa0000000-0xa3ffffff [ 0.671523] pci 0000:01:04.0: MEM window: 0xe4000000-0xe7ffffff [ 0.671529] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.671533] pci 0000:00:1e.0: IO window: 0xc000-0xdfff [ 0.671539] pci 0000:00:1e.0: MEM window: 0xe0000000-0xefffffff [ 0.671545] pci 0000:00:1e.0: PREFETCH window: 0x000000a0000000-0x000000afffffff [ 0.671560] pci 0000:00:1e.0: setting latency timer to 64 [ 0.671796] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 0.671800] PCI: setting IRQ 5 as level-triggered [ 0.671806] pci 0000:01:04.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 0.671813] bus: 00 index 0 io port: [0x00-0xffff] [ 0.671816] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.671820] bus: 01 index 0 io port: [0xc000-0xdfff] [ 0.671823] bus: 01 index 1 mmio: [0xe0000000-0xefffffff] [ 0.671826] bus: 01 index 2 mmio: [0xa0000000-0xafffffff] [ 0.671829] bus: 01 index 3 io port: [0x00-0xffff] [ 0.671833] bus: 01 index 4 mmio: [0x000000-0xffffffff] [ 0.671836] bus: 02 index 0 io port: [0xc000-0xc0ff] [ 0.671839] bus: 02 index 1 io port: [0xc400-0xc4ff] [ 0.671842] bus: 02 index 2 mmio: [0xa0000000-0xa3ffffff] [ 0.671845] bus: 02 index 3 mmio: [0xe4000000-0xe7ffffff] [ 0.671860] NET: Registered protocol family 2 [ 0.672026] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.672323] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.672451] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.672577] TCP: Hash tables configured (established 16384 bind 16384) [ 0.672580] TCP reno registered [ 0.672672] NET: Registered protocol family 1 [ 0.672839] checking if image is initramfs... it is [ 1.172067] Switched to high resolution mode on CPU 0 [ 1.553078] Freeing initrd memory: 6817k freed [ 1.553149] Simple Boot Flag at 0x37 set to 0x1 [ 1.553195] cpufreq: No nForce2 chipset. [ 1.553434] audit: initializing netlink socket (disabled) [ 1.553467] type=2000 audit(1251057875.552:1): initialized [ 1.564631] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.566481] VFS: Disk quotas dquot_6.5.1 [ 1.566562] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.567434] fuse init (API version 7.10) [ 1.567554] msgmni has been set to 930 [ 1.567818] alg: No test for stdrng (krng) [ 1.567835] io scheduler noop registered [ 1.567838] io scheduler anticipatory registered [ 1.567841] io scheduler deadline registered [ 1.567861] io scheduler cfq registered (default) [ 1.567885] pci 0000:00:02.0: Boot video device [ 1.580219] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.580233] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.704099] ACPI: AC Adapter [AC] (on-line) [ 1.709546] ACPI: Battery Slot [BAT0] (battery absent) [ 1.709639] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.709643] ACPI: Power Button (FF) [PWRF] [ 1.709706] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.709714] ACPI: Sleep Button (CM) [SBTN] [ 1.709772] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.715507] ACPI: Lid Switch [LID] [ 1.715723] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.715756] processor ACPI_CPU:00: registered as cooling_device0 [ 1.715761] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.722544] isapnp: Scanning for PnP cards... [ 2.076294] isapnp: No Plug & Play device found [ 2.077773] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.078258] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 2.078267] serial 0000:00:1f.6: PCI INT B disabled [ 2.079162] brd: module loaded [ 2.079588] loop: module loaded [ 2.079694] Fixed MDIO Bus: probed [ 2.079703] PPP generic driver version 2.4.2 [ 2.079785] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 2.079823] Driver 'sd' needs updating - please use bus_type methods [ 2.079835] Driver 'sr' needs updating - please use bus_type methods [ 2.079931] ata_piix 0000:00:1f.1: version 2.12 [ 2.079941] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 2.080232] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 2.080235] PCI: setting IRQ 11 as level-triggered [ 2.080241] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 2.080290] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.080394] scsi0 : ata_piix [ 2.080513] scsi1 : ata_piix [ 2.081863] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 2.081867] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 2.244461] ata1.00: ATA-7: FUJITSU MHV2040AT, 000000A0, max UDMA/100 [ 2.244466] ata1.00: 78140160 sectors, multi 16: LBA [ 2.260429] ata1.00: configured for UDMA/100 [ 2.432299] ata2.01: ATAPI: _NEC DVD+/-RW ND-6500A, 2.40, max UDMA/33 [ 2.480271] ata2.01: configured for UDMA/33 [ 2.497789] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2040A 0000 PQ: 0 ANSI: 5 [ 2.497919] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB) [ 2.497942] sd 0:0:0:0: [sda] Write Protect is off [ 2.497945] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.497980] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.498070] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB) [ 2.498090] sd 0:0:0:0: [sda] Write Protect is off [ 2.498093] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.498126] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.498131] sda: sda1 sda2 < sda5 sda6 > [ 2.615952] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.616041] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.651215] scsi 1:0:1:0: CD-ROM _NEC DVD+-RW ND-6500A 2.40 PQ: 0 ANSI: 5 [ 2.773492] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.773497] Uniform CD-ROM driver Revision: 3.20 [ 2.773617] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 2.773668] sr 1:0:1:0: Attached scsi generic sg1 type 5 [ 2.774470] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.972193] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 2.972197] PCI: setting IRQ 10 as level-triggered [ 2.972202] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 2.972235] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.972240] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.972327] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.976256] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.976264] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.976277] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xfebff000 [ 2.992027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.992137] usb usb1: configuration #1 chosen from 1 choice [ 2.992175] hub 1-0:1.0: USB hub found [ 2.992186] hub 1-0:1.0: 4 ports detected [ 2.992326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.992350] uhci_hcd: USB Universal Host Controller Interface driver [ 2.992620] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 2.992625] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 2.992633] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.992637] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.992696] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.992719] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 [ 2.992819] usb usb2: configuration #1 chosen from 1 choice [ 2.992859] hub 2-0:1.0: USB hub found [ 2.992868] hub 2-0:1.0: 2 ports detected [ 3.392198] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 3.392203] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 3.392211] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.392215] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.392277] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.392299] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001600 [ 3.392408] usb usb3: configuration #1 chosen from 1 choice [ 3.392442] hub 3-0:1.0: USB hub found [ 3.392451] hub 3-0:1.0: 2 ports detected [ 3.392637] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.402273] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.406892] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.406899] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.406903] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.406906] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.406910] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.407116] mice: PS/2 mouse device common for all mice [ 3.407319] rtc_cmos 00:03: RTC can wake from S4 [ 3.407365] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.407383] rtc0: alarms up to one month, 242 bytes nvram [ 3.407482] device-mapper: uevent: version 1.0.3 [ 3.407629] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.407691] device-mapper: multipath: version 1.0.5 loaded [ 3.407695] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.407798] EISA: Probing bus 0 at eisa.0 [ 3.407807] Cannot allocate resource for EISA slot 1 [ 3.407837] EISA: Detected 0 cards. [ 3.407921] cpuidle: using governor ladder [ 3.408004] cpuidle: using governor menu [ 3.408719] TCP cubic registered [ 3.408853] NET: Registered protocol family 10 [ 3.409411] lo: Disabled Privacy Extensions [ 3.409841] NET: Registered protocol family 17 [ 3.409865] Bluetooth: L2CAP ver 2.11 [ 3.409867] Bluetooth: L2CAP socket layer initialized [ 3.409871] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.409873] Bluetooth: SCO socket layer initialized [ 3.409916] Bluetooth: RFCOMM socket layer initialized [ 3.409925] Bluetooth: RFCOMM TTY layer initialized [ 3.409928] Bluetooth: RFCOMM ver 1.10 [ 3.409976] IO APIC resources could be not be allocated. [ 3.410027] Using IPI No-Shortcut mode [ 3.410137] registered taskstats version 1 [ 3.410272] Magic number: 5:376:94 [ 3.410368] rtc_cmos 00:03: setting system clock to 2009-08-23 20:04:37 UTC (1251057877) [ 3.410373] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.410376] EDD information not available. [ 3.410755] Freeing unused kernel memory: 532k freed [ 3.410915] Write protecting the kernel text: 4116k [ 3.410970] Write protecting the kernel read-only data: 1528k [ 3.417754] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.492084] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 3.531829] Linux agpgart interface v0.103 [ 3.536472] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 3.536855] agpgart-intel 0000:00:00.0: detected 32636K stolen memory [ 3.538328] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xb0000000 [ 3.555224] [drm] Initialized drm 1.1.0 20060810 [ 3.563003] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 3.563010] pci 0000:00:02.0: setting latency timer to 64 [ 3.563217] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 3.682777] usb 2-1: configuration #1 chosen from 1 choice [ 4.180995] usbcore: registered new interface driver hiddev [ 4.217981] input: HID 1241:1177 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5 [ 4.218756] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.218804] 8139cp 0000:01:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.244308] generic-usb 0003:1241:1177.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:1d.0-1/input0 [ 4.244346] usbcore: registered new interface driver usbhid [ 4.244351] usbhid: v2.6:USB HID core driver [ 4.259590] 8139too Fast Ethernet driver 0.9.28 [ 4.262600] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3 [ 4.262607] PCI: setting IRQ 3 as level-triggered [ 4.262614] 8139too 0000:01:02.0: PCI INT A -> Link[LNKE] -> GSI 3 (level, low) -> IRQ 3 [ 4.262628] 8139too 0000:01:02.0: setting latency timer to 64 [ 4.263744] eth0: RealTek RTL8139 at 0xc100, 00:40:d0:6c:09:e8, IRQ 3 [ 4.263748] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 4.428832] Marking TSC unstable due to TSC halts in idle [ 4.917462] PM: Starting manual resume from disk [ 4.917468] PM: Resume from partition 8:5 [ 4.917470] PM: Checking hibernation image. [ 4.917702] PM: Resume from disk failed. [ 4.953293] kjournald starting. Commit interval 5 seconds [ 4.953309] EXT3-fs: mounted filesystem with ordered data mode. [ 15.506554] udev: starting version 145 [ 16.311284] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.399593] acpi device:05: registered as cooling_device1 [ 16.399970] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/input/input6 [ 16.402273] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 17.022989] intel_rng: Firmware space is locked read-only. If you can't or [ 17.022992] intel_rng: don't want to disable this in firmware setup, and if [ 17.022994] intel_rng: you are certain that your system has a functional [ 17.022995] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 17.203821] yenta_cardbus 0000:01:04.0: CardBus bridge found [1734:1079] [ 17.203841] yenta_cardbus 0000:01:04.0: Using CSCINT to route CSC interrupts to PCI [ 17.203845] yenta_cardbus 0000:01:04.0: Routing CardBus interrupts to PCI [ 17.203851] yenta_cardbus 0000:01:04.0: TI: mfunc 0x010c1202, devctl 0x44 [ 17.347574] cfg80211: Calling CRDA to update world regulatory domain [ 17.374103] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 17.432992] yenta_cardbus 0000:01:04.0: ISA IRQ mask 0x0000, PCI irq 5 [ 17.432998] yenta_cardbus 0000:01:04.0: Socket status: 30000006 [ 17.433004] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05 [ 17.433017] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff [ 17.433022] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: clean. [ 17.433584] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff [ 17.433589] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge Memory window: 0xa0000000 - 0xafffffff [ 18.013204] cfg80211: World regulatory domain updated: [ 18.013210] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 18.013214] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.013218] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.013222] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.013226] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.013229] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.087653] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 18.089290] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 18.090007] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.090603] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.091394] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.141508] p54pci 0000:01:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 18.141674] p54pci 0000:01:01.0: firmware: requesting isl3886 [ 18.340990] 0000:01:01.0 (p54pci): cannot find firmware (isl3886) [ 18.341037] p54pci 0000:01:01.0: PCI INT A disabled [ 18.341046] p54pci: probe of 0000:01:01.0 failed with error -2 [ 18.365868] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb1, caps: 0xa04713/0x0 [ 18.420585] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input7 [ 19.929362] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 19.929442] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 20.756044] intel8x0_measure_ac97_clock: measured 55455 usecs [ 20.756048] intel8x0: clocking to 48000 [ 21.420079] lp: driver loaded but no devices found [ 21.729367] Adding 722884k swap on /dev/sda5. Priority:-1 extents:1 across:722884k [ 22.287082] EXT3 FS on sda6, internal journal [ 23.941901] type=1505 audit(1251050698.029:2): operation="profile_replace" info="failed to unpack profile" name="/usr/lib/cups/backend/cups-pdf" pid=1142 [ 24.085152] type=1505 audit(1251050698.173:3): operation="profile_replace" info="failed to unpack profile" name="/usr/sbin/mysqld-akonadi" pid=1143 [ 32.974928] type=1505 audit(1251050707.061:4): operation="profile_replace" info="failed to unpack profile" name="/usr/bin/evince" pid=1144 [ 33.200144] type=1505 audit(1251050707.289:5): operation="profile_replace" info="failed to unpack profile" name="/sbin/dhclient3" pid=1145 [ 33.317672] type=1505 audit(1251050707.405:6): operation="profile_replace" info="failed to unpack profile" name="/usr/sbin/tcpdump" pid=1146 [ 33.416340] type=1505 audit(1251050707.505:7): operation="profile_replace" info="failed to unpack profile" name="/usr/share/gdm/guest-session/Xsession" pid=1147 [ 40.022181] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 40.022225] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 40.200064] eth0: link down [ 40.200163] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.232254] ppdev: user-space parallel port driver [ 41.701265] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 41.701326] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 77.238942] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 77.238974] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 77.489753] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 77.489787] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 77.604047] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 77.604189] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 77.669146] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 77.669176] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 77.715688] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 77.715858] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 78.427867] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 78.427938] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 113.308052] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 113.472921] usb 3-1: configuration #1 chosen from 1 choice [ 113.648163] usbcore: registered new interface driver usbserial [ 113.648185] USB Serial support registered for generic [ 113.648234] usbcore: registered new interface driver usbserial_generic [ 113.648237] usbserial: USB Serial Driver core [ 113.891140] USB Serial support registered for GSM modem (1-port) [ 113.891202] option 3-1:1.0: GSM modem (1-port) converter detected [ 113.891334] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 113.891361] option 3-1:1.1: GSM modem (1-port) converter detected [ 113.891423] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 113.891447] option 3-1:1.2: GSM modem (1-port) converter detected [ 113.891505] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 113.891522] usbcore: registered new interface driver option [ 113.891525] option: v0.7.2:USB Driver for GSM modems [ 175.488075] usb 3-1: USB disconnect, address 2 [ 175.491454] option 3-1:1.0: device disconnected [ 175.491583] option 3-1:1.1: device disconnected [ 175.491708] option 3-1:1.2: device disconnected [ 175.561396] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 175.561534] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 175.561642] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 185.460047] usb 3-1: new full speed USB device using uhci_hcd and address 3 [ 185.625878] usb 3-1: configuration #1 chosen from 1 choice [ 185.629044] option 3-1:1.0: GSM modem (1-port) converter detected [ 185.629245] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 185.636534] option 3-1:1.1: GSM modem (1-port) converter detected [ 185.636692] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 185.645690] option 3-1:1.2: GSM modem (1-port) converter detected [ 185.645771] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 268.544096] PPP BSD Compression module registered [ 268.588485] PPP Deflate Compression module registered