[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-71-generic (buildd@lcy01-27) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #92-Ubuntu SMP Fri Mar 24 12:58:08 UTC 2017 (Ubuntu 4.4.0-71.92-generic 4.4.49) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ace3efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ace3f000-0x00000000acebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000acebf000-0x00000000acfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000acfbf000-0x00000000acffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cfdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion g6 Notebook PC /166F, BIOS F.63 03/22/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1cfe00 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0AD000000 mask FFF000000 uncachable [ 0.000000] 3 base 0AE000000 mask FFE000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 1CFE00000 mask FFFE00000 uncachable [ 0.000000] 8 base 1D0000000 mask FF0000000 uncachable [ 0.000000] 9 base 1E0000000 mask FE0000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x01d65000, 0x01d65fff] PGTABLE [ 0.000000] BRK [0x01d66000, 0x01d66fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33936000-0x35c92fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000ACFFE120 00007C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000ACFFC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 0x00000000ACFEC000 00C132 (v01 HP 166F 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 0x00000000ACF6C000 000040 [ 0.000000] ACPI: FACS 0x00000000ACF6C000 000040 [ 0.000000] ACPI: ASF! 0x00000000ACFFD000 0000A5 (v32 HP 166F 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 0x00000000ACFFB000 000038 (v01 HP 166F 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 0x00000000ACFFA000 00008C (v02 HP 166F 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 0x00000000ACFF9000 00003C (v01 HP 166F 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 0x00000000ACFEB000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000ACFEA000 000D52 (v01 HP 166F 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 0x00000000ACFE8000 000028 (v01 HP 166F 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 0x00000000ACFE5000 000034 (v07 HP 166F 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000ACFE4000 000804 (v01 HP 166F 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 0x00000000ACFE3000 000996 (v01 HP 166F 00003000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 6530MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff] [ 0.000000] HighMem [mem 0x0000000037bfe000-0x00000001cfdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ace3efff] [ 0.000000] node 0: [mem 0x00000000acfff000-0x00000000acffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001cfdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001cfdfffff] [ 0.000000] On node 0 totalpages: 1559516 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] Normal zone: 2190 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1331266 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 19 pages/cpu @f5d3f000 s47436 r0 d30388 u77824 [ 0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1557286 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-71-generic root=UUID=8b901faf-e9ba-4cce-ab45-732d9c04856a ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00037bfe:001cfe00) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 6119364K/6238064K available (7930K kernel code, 770K rwdata, 3160K rodata, 940K init, 800K bss, 118700K reserved, 0K cma-reserved, 5325060K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) .init : 0xc1b99000 - 0xc1c84000 ( 940 kB) .data : 0xc17bed0b - 0xc1b97a00 (3939 kB) .text : 0xc1000000 - 0xc17bed0b (7931 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:2304 nr_irqs:488 16 [ 0.000000] CPU 0 irqstacks, hard=f103a000 soft=f103c000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 6815744 bytes of page_ext [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.710 MHz processor [ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.42 BogoMIPS (lpj=9578840) [ 0.000038] pid_max: default: 32768 minimum: 301 [ 0.000045] ACPI: Core revision 20150930 [ 0.009990] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.010009] Security Framework initialized [ 0.010010] Yama: becoming mindful. [ 0.010027] AppArmor: AppArmor initialized [ 0.010060] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.010062] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.010244] Initializing cgroup subsys io [ 0.010248] Initializing cgroup subsys memory [ 0.010254] Initializing cgroup subsys devices [ 0.010256] Initializing cgroup subsys freezer [ 0.010259] Initializing cgroup subsys net_cls [ 0.010261] Initializing cgroup subsys perf_event [ 0.010263] Initializing cgroup subsys net_prio [ 0.010269] Initializing cgroup subsys hugetlb [ 0.010270] Initializing cgroup subsys pids [ 0.010292] CPU: Physical Processor ID: 0 [ 0.010293] CPU: Processor Core ID: 0 [ 0.010298] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.010299] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.010301] mce: CPU supports 7 MCE banks [ 0.010310] CPU0: Thermal monitoring handled by SMI [ 0.010317] process: using mwait in idle threads [ 0.010322] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.010324] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.010980] Freeing SMP alternatives memory: 28K (c1c84000 - c1c8b000) [ 0.025569] ftrace: allocating 31396 entries in 62 pages [ 0.068204] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.068211] smpboot: Max logical packages: 4 [ 0.068218] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.068710] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.108409] TSC deadline timer enabled [ 0.108417] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.108470] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.108529] ... version: 3 [ 0.108532] ... bit width: 48 [ 0.108534] ... generic registers: 4 [ 0.108537] ... value mask: 0000ffffffffffff [ 0.108540] ... max period: 00007fffffffffff [ 0.108543] ... fixed-purpose events: 3 [ 0.108546] ... event mask: 000000070000000f [ 0.111055] CPU 1 irqstacks, hard=f040e000 soft=f0418000 [ 0.111059] x86: Booting SMP configuration: [ 0.111063] .... node #0, CPUs: #1 [ 0.111791] Initializing CPU#1 [ 0.111877] CPU1: Thermal monitoring handled by SMI [ 0.114281] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.114521] CPU 2 irqstacks, hard=f0570000 soft=f0572000 [ 0.114525] #2 [ 0.116300] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.116303] Initializing CPU#2 [ 0.116378] CPU2: Thermal monitoring handled by SMI [ 0.118704] CPU 3 irqstacks, hard=f05d4000 soft=f05d6000 [ 0.118712] #3 [ 0.119399] Initializing CPU#3 [ 0.119470] CPU3: Thermal monitoring handled by SMI [ 0.121587] x86: Booted up 1 node, 4 CPUs [ 0.121596] smpboot: Total of 4 processors activated (19157.68 BogoMIPS) [ 0.130336] devtmpfs: initialized [ 0.131530] evm: security.selinux [ 0.131533] evm: security.SMACK64 [ 0.131536] evm: security.SMACK64EXEC [ 0.131539] evm: security.SMACK64TRANSMUTE [ 0.131542] evm: security.SMACK64MMAP [ 0.131544] evm: security.ima [ 0.131547] evm: security.capability [ 0.131821] PM: Registering ACPI NVS region [mem 0xacebf000-0xacfbefff] (1048576 bytes) [ 0.132167] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.132401] pinctrl core: initialized pinctrl subsystem [ 0.132691] RTC time: 21:14:48, date: 03/31/17 [ 0.133032] NET: Registered protocol family 16 [ 0.133603] EISA bus registered [ 0.141825] cpuidle: using governor ladder [ 0.153827] cpuidle: using governor menu [ 0.153836] PCCT header not found. [ 0.154077] Simple Boot Flag at 0x44 set to 0x1 [ 0.154189] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.154194] ACPI: bus type PCI registered [ 0.154199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.154427] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.154434] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.154437] PCI: Using MMCONFIG for extended config space [ 0.154440] PCI: Using configuration type 1 for base access [ 0.154646] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.170967] ACPI: Added _OSI(Module Device) [ 0.170973] ACPI: Added _OSI(Processor Device) [ 0.170977] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.170980] ACPI: Added _OSI(Processor Aggregator Device) [ 0.177928] ACPI: Executed 1 blocks of module-level executable AML code [ 0.184328] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.185465] ACPI: Dynamic OEM Table Load: [ 0.185486] ACPI: SSDT 0x00000000F1012000 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.187090] ACPI: Dynamic OEM Table Load: [ 0.187106] ACPI: SSDT 0x00000000F06B8C00 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.188455] ACPI: Dynamic OEM Table Load: [ 0.188468] ACPI: SSDT 0x00000000F065B200 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.190973] ACPI : EC: EC started [ 0.196042] ACPI: Interpreter enabled [ 0.196121] ACPI: (supports S0 S3 S4 S5) [ 0.196126] ACPI: Using IOAPIC for interrupt routing [ 0.196216] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.210240] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.210256] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.210360] \_SB_.PCI0:_OSC invalid UUID [ 0.210363] _OSC request data:1 1f 0 [ 0.210375] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.211466] PCI host bridge to bus 0000:00 [ 0.211474] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.211480] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.211486] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.211492] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window] [ 0.211498] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.211518] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.211754] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.211793] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.211810] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.211823] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.212096] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.212165] pci 0000:00:16.0: reg 0x10: [mem 0xc2604000-0xc260400f 64bit] [ 0.212302] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.212517] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.213007] pci 0000:00:1a.0: reg 0x10: [mem 0xc2609000-0xc26093ff] [ 0.215513] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.215818] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.215958] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.216028] pci 0000:00:1b.0: reg 0x10: [mem 0xc2600000-0xc2603fff 64bit] [ 0.216189] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.216292] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.216419] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.216596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.216692] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.216818] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.216993] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.217085] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.217210] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.217383] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.217475] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.217611] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.218083] pci 0000:00:1d.0: reg 0x10: [mem 0xc2608000-0xc26083ff] [ 0.220564] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.220858] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.220986] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.221360] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.221428] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.221449] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 0.221471] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.221492] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 0.221513] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.221534] pci 0000:00:1f.2: reg 0x24: [mem 0xc2607000-0xc26077ff] [ 0.221622] pci 0000:00:1f.2: PME# supported from D3hot [ 0.221817] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.221861] pci 0000:00:1f.3: reg 0x10: [mem 0xc2605000-0xc26050ff 64bit] [ 0.221915] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 0.222315] pci 0000:01:00.0: [1814:5390] type 00 class 0x028000 [ 0.222422] pci 0000:01:00.0: reg 0x10: [mem 0xc2500000-0xc250ffff] [ 0.230152] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.230168] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff] [ 0.230360] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000 [ 0.230444] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.230504] pci 0000:02:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 0.230542] pci 0000:02:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.230685] pci 0000:02:00.0: supports D1 D2 [ 0.230690] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.230814] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.238142] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.238153] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.238172] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.238368] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.238445] pci 0000:03:00.0: reg 0x10: [mem 0xc1500000-0xc1500fff] [ 0.238671] pci 0000:03:00.0: supports D1 D2 [ 0.238676] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.246149] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.246159] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.246169] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff] [ 0.246183] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.246227] pci_bus 0000:00: on NUMA node 0 [ 0.247423] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.247583] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.247735] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.247883] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.248031] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.248181] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.248330] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.248477] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.248756] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.248926] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.249234] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.249240] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.249248] vgaarb: loaded [ 0.249252] vgaarb: bridge control possible 0000:00:02.0 [ 0.249999] SCSI subsystem initialized [ 0.250135] libata version 3.00 loaded. [ 0.250217] ACPI: bus type USB registered [ 0.250273] usbcore: registered new interface driver usbfs [ 0.250302] usbcore: registered new interface driver hub [ 0.250366] usbcore: registered new device driver usb [ 0.250822] PCI: Using ACPI for IRQ routing [ 0.268328] PCI: pci_cache_line_size set to 64 bytes [ 0.268457] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.268463] e820: reserve RAM buffer [mem 0xace3f000-0xafffffff] [ 0.268468] e820: reserve RAM buffer [mem 0xad000000-0xafffffff] [ 0.268473] e820: reserve RAM buffer [mem 0x1cfe00000-0x1cfffffff] [ 0.268843] NetLabel: Initializing [ 0.268847] NetLabel: domain hash size = 128 [ 0.268850] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.268878] NetLabel: unlabeled traffic allowed by default [ 0.269212] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.269228] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.271268] amd_nb: Cannot enumerate AMD northbridges [ 0.271307] clocksource: Switched to clocksource hpet [ 0.292233] AppArmor: AppArmor Filesystem Enabled [ 0.292420] pnp: PnP ACPI init [ 0.293055] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.293063] system 00:00: [io 0x1004-0x1013] has been reserved [ 0.293072] system 00:00: [io 0xffff] has been reserved [ 0.293078] system 00:00: [io 0xffff] has been reserved [ 0.293085] system 00:00: [io 0x0400-0x0453] could not be reserved [ 0.293091] system 00:00: [io 0x0454-0x0457] has been reserved [ 0.293096] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.293102] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.293107] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.293113] system 00:00: [io 0x0380-0x0387] has been reserved [ 0.293124] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293212] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.293333] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.293449] pnp 00:03: Plug and Play ACPI device, IDs SYN1e3f SYN1e00 SYN0002 PNP0f13 (active) [ 0.293831] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.293838] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.293844] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.293850] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.293856] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved [ 0.293862] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.293867] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.293874] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.293880] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.293886] system 00:04: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.293894] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294438] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved [ 0.294444] system 00:05: [mem 0x40000000-0x401fffff] could not be reserved [ 0.294452] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.294496] pnp: PnP ACPI: found 6 devices [ 0.294508] PnPBIOS: Disabled by ACPI PNP [ 0.335442] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.335518] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.335533] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff] [ 0.335553] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.335560] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.335577] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.335592] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.335598] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.335610] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff] [ 0.335620] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.335638] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.335644] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.335649] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.335655] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window] [ 0.335660] pci_bus 0000:01: resource 1 [mem 0xc2500000-0xc25fffff] [ 0.335666] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.335671] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.335676] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.335681] pci_bus 0000:03: resource 1 [mem 0xc1500000-0xc24fffff] [ 0.335687] pci_bus 0000:03: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.335767] NET: Registered protocol family 2 [ 0.336197] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.336228] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.336267] TCP: Hash tables configured (established 8192 bind 8192) [ 0.336297] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.336309] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.336442] NET: Registered protocol family 1 [ 0.336483] pci 0000:00:02.0: Video device with shadowed ROM [ 0.367575] PCI: CLS 64 bytes, default 64 [ 0.367712] Unpacking initramfs... [ 2.283002] Freeing initrd memory: 36212K (f3936000 - f5c93000) [ 2.283322] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 2.283327] hw unit of domain pp0-core 2^-16 Joules [ 2.283330] hw unit of domain package 2^-16 Joules [ 2.283333] hw unit of domain pp1-gpu 2^-16 Joules [ 2.283536] Scanning for low memory corruption every 60 seconds [ 2.284714] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 2.284805] audit: initializing netlink subsys (disabled) [ 2.284836] audit: type=2000 audit(1490994890.244:1): initialized [ 2.285944] Initialise system trusted keyring [ 2.286251] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.291308] zbud: loaded [ 2.291580] VFS: Disk quotas dquot_6.6.0 [ 2.291696] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.292470] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.293195] fuse init (API version 7.23) [ 2.293679] Key type big_key registered [ 2.293717] Allocating IMA MOK and blacklist keyrings. [ 2.294657] Key type asymmetric registered [ 2.294665] Asymmetric key parser 'x509' registered [ 2.294716] bounce: pool size: 64 pages [ 2.294823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.294912] io scheduler noop registered [ 2.294922] io scheduler deadline registered (default) [ 2.295024] io scheduler cfq registered [ 2.296334] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.296360] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.296454] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 2.296457] vesafb: scrolling: redraw [ 2.296462] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.296483] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override. [ 2.296526] vesafb: framebuffer at 0xb0000000, mapped to 0xf8600000, using 4160k, total 4160k [ 2.296799] Console: switching to colour frame buffer device 170x48 [ 2.296885] fb0: VESA VGA frame buffer device [ 2.296939] intel_idle: MWAIT substates: 0x21120 [ 2.296942] intel_idle: v0.4.1 model 0x2A [ 2.296946] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.297839] ACPI: AC Adapter [ACAD] (on-line) [ 2.298022] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.298313] ACPI: Lid Switch [LID0] [ 2.298445] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.298453] ACPI: Power Button [PWRB] [ 2.298590] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.298596] ACPI: Power Button [PWRF] [ 2.300261] [Firmware Bug]: Invalid critical threshold (0) [ 2.302484] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.302489] ACPI: Thermal Zone [TZ01] (0 C) [ 2.302570] GHES: HEST is not enabled! [ 2.302752] isapnp: Scanning for PnP cards... [ 2.303308] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.310521] Linux agpgart interface v0.103 [ 2.317583] loop: module loaded [ 2.318387] libphy: Fixed MDIO Bus: probed [ 2.318398] tun: Universal TUN/TAP device driver, 1.6 [ 2.318402] tun: (C) 1999-2004 Max Krasnyansky [ 2.318536] PPP generic driver version 2.4.2 [ 2.318737] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.318753] ehci-pci: EHCI PCI platform driver [ 2.319096] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.319116] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.319145] ehci-pci 0000:00:1a.0: debug port 2 [ 2.323083] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.323122] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2609000 [ 2.331211] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.331353] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.331361] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.331368] usb usb1: Product: EHCI Host Controller [ 2.331375] usb usb1: Manufacturer: Linux 4.4.0-71-generic ehci_hcd [ 2.331382] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.331870] hub 1-0:1.0: USB hub found [ 2.331892] hub 1-0:1.0: 2 ports detected [ 2.332585] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.332603] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.332630] ehci-pci 0000:00:1d.0: debug port 2 [ 2.336570] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.336608] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc2608000 [ 2.347207] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.347331] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.347339] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.347346] usb usb2: Product: EHCI Host Controller [ 2.347353] usb usb2: Manufacturer: Linux 4.4.0-71-generic ehci_hcd [ 2.347359] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.347833] hub 2-0:1.0: USB hub found [ 2.347853] hub 2-0:1.0: 2 ports detected [ 2.348254] ehci-platform: EHCI generic platform driver [ 2.348295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.348310] ohci-pci: OHCI PCI platform driver [ 2.348351] ohci-platform: OHCI generic platform driver [ 2.348385] uhci_hcd: USB Universal Host Controller Interface driver [ 2.348629] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.359530] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.359594] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.360068] mousedev: PS/2 mouse device common for all mice [ 2.360635] rtc_cmos 00:01: RTC can wake from S4 [ 2.360884] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.360932] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.360959] i2c /dev entries driver [ 2.361126] device-mapper: uevent: version 1.0.3 [ 2.361331] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.361403] platform eisa.0: Probing EISA bus 0 [ 2.361409] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.361415] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.361420] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.361425] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.361429] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.361434] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.361439] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.361444] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.361448] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.361453] platform eisa.0: EISA: Detected 0 cards [ 2.361517] cpufreq-nforce2: No nForce2 chipset. [ 2.361538] Intel P-state driver initializing. [ 2.361840] ledtrig-cpu: registered to indicate activity on CPUs [ 2.362657] NET: Registered protocol family 10 [ 2.363374] NET: Registered protocol family 17 [ 2.363409] Key type dns_resolver registered [ 2.364162] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29 [ 2.364180] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29 [ 2.364195] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29 [ 2.364218] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29 [ 2.364333] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 2.364385] Using IPI No-Shortcut mode [ 2.364837] registered taskstats version 1 [ 2.364881] Loading compiled-in X.509 certificates [ 2.370233] ACPI: Battery Slot [BAT0] (battery present) [ 2.374477] Loaded X.509 cert 'Build time autogenerated kernel key: b89f1f18209e76b8bf56910550573538e1d09e29' [ 2.374545] zswap: loaded using pool lzo/zbud [ 2.380786] Key type trusted registered [ 2.381883] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.392616] Key type encrypted registered [ 2.392633] AppArmor: AppArmor sha1 policy hashing enabled [ 2.392642] ima: No TPM chip found, activating TPM-bypass! [ 2.392702] evm: HMAC attrs: 0x1 [ 2.393405] Magic number: 9:707:248 [ 2.393541] rtc_cmos 00:01: setting system clock to 2017-03-31 21:14:51 UTC (1490994891) [ 2.393713] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.393717] EDD information not available. [ 2.393944] PM: Hibernation image not present or could not be loaded. [ 2.613901] isapnp: No Plug & Play device found [ 2.614443] Freeing unused kernel memory: 940K (c1b99000 - c1c84000) [ 2.614626] Write protecting the kernel text: 7932k [ 2.614714] Write protecting the kernel read-only data: 3168k [ 2.614718] NX-protecting the kernel data: 6404k [ 2.647219] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.647888] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 2.648132] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 2.649403] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 2.649575] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 2.650470] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 2.650672] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 2.650862] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 2.651028] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 2.651284] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 2.651468] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 2.663198] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.747344] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 2.790291] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.790305] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.790963] hub 1-1:1.0: USB hub found [ 2.791167] hub 1-1:1.0: 6 ports detected [ 2.792565] wmi: Mapper loaded [ 2.806156] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.806170] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.807683] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 24 [ 2.808437] hub 2-1:1.0: USB hub found [ 2.808519] hub 2-1:1.0: 6 ports detected [ 2.827312] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.827341] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.828450] r8169 0000:02:00.0 eth0: RTL8105e at 0xf8470000, ec:9a:74:41:14:67, XID 00a00000 IRQ 25 [ 2.838397] [drm] Initialized drm 1.1.0 20060810 [ 2.852104] ahci 0000:00:1f.2: version 3.0 [ 2.867218] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode [ 2.867230] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 2.877665] scsi host0: ahci [ 2.878503] scsi host1: ahci [ 2.882376] scsi host2: ahci [ 2.882687] scsi host3: ahci [ 2.883642] scsi host4: ahci [ 2.890917] scsi host5: ahci [ 2.891122] ata1: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607100 irq 26 [ 2.891127] ata2: DUMMY [ 2.891131] ata3: DUMMY [ 2.891135] ata4: DUMMY [ 2.891171] ata5: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607300 irq 26 [ 2.891177] ata6: DUMMY [ 2.973287] r8169 0000:02:00.0 eno1: renamed from eth0 [ 3.050849] [drm] Memory usable by graphics device = 2048M [ 3.050861] checking generic (b0000000 410000) vs hw (b0000000 10000000) [ 3.050865] fb: switching to inteldrmfb from VESA VGA [ 3.050933] Console: switching to colour dummy device 80x25 [ 3.051215] [drm] Replacing VGA console driver [ 3.057556] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.057564] [drm] Driver supports precise vblank timestamp query. [ 3.059693] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.079199] usb 2-1.5: new high-speed USB device number 3 using ehci-pci [ 3.098242] fbcon: inteldrmfb (fb0) is primary device [ 3.098524] Console: switching to colour frame buffer device 170x48 [ 3.098638] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.099786] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.103330] acpi device:1e: registered as cooling_device4 [ 3.103571] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6 [ 3.103784] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 3.211251] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.211295] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.214600] ata5.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100 [ 3.216101] ata5.00: configured for UDMA/100 [ 3.219001] usb 2-1.5: New USB device found, idVendor=0c45, idProduct=6321 [ 3.219011] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3.219017] usb 2-1.5: Product: HP Webcam-101 [ 3.219022] usb 2-1.5: Manufacturer: DC01901LB1JJ4H [ 3.246490] ata1.00: ATA-8: ST9750423AS, 0001HPM1, max UDMA/133 [ 3.246500] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.264315] ata1.00: configured for UDMA/133 [ 3.264925] scsi 0:0:0:0: Direct-Access ATA ST9750423AS HPM1 PQ: 0 ANSI: 5 [ 3.265854] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 3.265863] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.265882] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.266080] sd 0:0:0:0: [sda] Write Protect is off [ 3.266091] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.266219] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.271290] scsi 4:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5 [ 3.283240] tsc: Refined TSC clocksource calibration: 2394.561 MHz [ 3.283252] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22842564e28, max_idle_ns: 440795246705 ns [ 3.297807] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.297816] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.298378] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.298688] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 3.379778] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 3.382002] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.720345] psmouse serio1: synaptics: queried max coordinates: x [..5634], y [..4598] [ 3.798685] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 706145 [ 3.848468] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 4.283541] clocksource: Switched to clocksource tsc [ 4.743935] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 5.193552] random: nonblocking pool is initialized [ 6.325605] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 6.326035] systemd[1]: Detected architecture x86. [ 6.344572] systemd[1]: Set hostname to . [ 7.987090] systemd[1]: [/lib/systemd/system/plexmediaserver.service:11] Invalid escape sequences in line, correcting: "/bin/sh -c 'LD_LIBRARY_PATH=/usr/lib/plexmediaserver /usr/lib/plexmediaserver/Plex\ Media\ Server'" [ 8.041850] systemd[1]: Listening on Journal Audit Socket. [ 8.042039] systemd[1]: Listening on Syslog Socket. [ 8.042079] systemd[1]: Reached target Remote File Systems (Pre). [ 8.042194] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.042270] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.042302] systemd[1]: Reached target Encrypted Volumes. [ 8.042567] systemd[1]: Created slice User and Session Slice. [ 8.042663] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.042738] systemd[1]: Listening on udev Kernel Socket. [ 8.042882] systemd[1]: Listening on Journal Socket. [ 8.042945] systemd[1]: Reached target Remote File Systems. [ 8.043040] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 8.043072] systemd[1]: Reached target User and Group Name Lookups. [ 8.043175] systemd[1]: Listening on udev Control Socket. [ 8.043384] systemd[1]: Created slice System Slice. [ 8.055337] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 8.056817] systemd[1]: Starting Journal Service... [ 8.058555] systemd[1]: Mounting POSIX Message Queue File System... [ 8.339114] systemd[1]: Starting Load Kernel Modules... [ 8.340469] systemd[1]: Mounting Huge Pages File System... [ 8.342262] systemd[1]: Mounting Debug File System... [ 8.343800] systemd[1]: Starting Set console keymap... [ 8.345543] systemd[1]: Started Braille Device Support. [ 8.348804] systemd[1]: Starting Uncomplicated firewall... [ 8.348895] systemd[1]: Reached target Slices. [ 8.350730] systemd[1]: Started Read required files in advance. [ 8.353317] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.655174] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 8.657016] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.843484] systemd[1]: Started Uncomplicated firewall. [ 9.055489] systemd[1]: Mounted Huge Pages File System. [ 9.055633] systemd[1]: Mounted Debug File System. [ 9.055727] systemd[1]: Mounted POSIX Message Queue File System. [ 9.099223] systemd[1]: Started Journal Service. [ 9.559048] lp: driver loaded but no devices found [ 9.574132] ppdev: user-space parallel port driver [ 10.592762] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 11.298081] systemd-journald[219]: Received request to flush runtime journal from PID 1 [ 13.093924] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.161396] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254) [ 13.161421] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.161434] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 13.161451] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.WMID.GPIO) (20150930/utaddress-254) [ 13.161468] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150930/utaddress-254) [ 13.161485] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.161491] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 13.161507] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.WMID.GPIO) (20150930/utaddress-254) [ 13.161523] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150930/utaddress-254) [ 13.161538] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.161544] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 13.161561] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.WMID.GPIO) (20150930/utaddress-254) [ 13.161577] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150930/utaddress-254) [ 13.161592] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.161598] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 13.635964] media: Linux media interface: v0.10 [ 13.696794] Linux video capture interface: v2.00 [ 14.491646] uvcvideo: Found UVC 1.00 device HP Webcam-101 (0c45:6321) [ 14.583561] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7 [ 14.587024] usbcore: registered new interface driver uvcvideo [ 14.587034] USB Video Class driver (1.1.1) [ 14.596452] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 14.596469] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.596479] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 14.596487] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 14.596494] snd_hda_codec_idt hdaudioC0D0: inputs: [ 14.596504] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 [ 14.596513] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 15.069891] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 15.074162] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected [ 15.162304] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 15.178897] intel_rapl: Found RAPL domain package [ 15.178908] intel_rapl: Found RAPL domain core [ 15.178914] intel_rapl: Found RAPL domain uncore [ 15.178928] intel_rapl: RAPL package 0 domain package locked by BIOS [ 15.388297] rt2800pci 0000:01:00.0 wlp1s0: renamed from wlan0 [ 15.628554] input: HP WMI hotkeys as /devices/virtual/input/input10 [ 15.791339] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 15.791969] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 15.792212] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 16.228675] cfg80211: World regulatory domain updated: [ 16.228685] cfg80211: DFS Master region: unset [ 16.228689] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 16.228696] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 16.228702] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 16.228707] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 16.228712] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 16.228718] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 16.228723] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 16.228728] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 16.228733] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 16.575274] audit: type=1400 audit(1490994905.678:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=669 comm="apparmor_parser" [ 16.771297] audit: type=1400 audit(1490994905.874:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=666 comm="apparmor_parser" [ 16.771321] audit: type=1400 audit(1490994905.874:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=666 comm="apparmor_parser" [ 16.771335] audit: type=1400 audit(1490994905.874:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=666 comm="apparmor_parser" [ 16.771349] audit: type=1400 audit(1490994905.874:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=666 comm="apparmor_parser" [ 16.773831] audit: type=1400 audit(1490994905.874:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=665 comm="apparmor_parser" [ 16.773865] audit: type=1400 audit(1490994905.874:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=665 comm="apparmor_parser" [ 16.784291] audit: type=1400 audit(1490994905.886:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=672 comm="apparmor_parser" [ 16.851849] audit: type=1400 audit(1490994905.954:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=670 comm="apparmor_parser" [ 16.851873] audit: type=1400 audit(1490994905.954:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=670 comm="apparmor_parser" [ 19.970619] Adding 6236156k swap on /dev/sda7. Priority:-1 extents:1 across:6236156k FS [ 30.302759] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 30.948461] r8169 0000:02:00.0 eno1: link down [ 30.948515] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 30.987069] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 30.987113] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 31.031574] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 [ 31.162257] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 32.701307] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 34.674392] audit_printk_skb: 51 callbacks suppressed [ 34.674395] audit: type=1400 audit(1490994923.778:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=1113 comm="apparmor_parser" [ 35.305879] audit: type=1400 audit(1490994924.410:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.remmina.remmina" pid=1116 comm="apparmor_parser" [ 35.335682] audit: type=1400 audit(1490994924.438:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.remmina.winpr-hash" pid=1118 comm="apparmor_parser" [ 35.339006] audit: type=1400 audit(1490994924.442:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.remmina.winpr-makecert" pid=1120 comm="apparmor_parser" [ 38.402971] wlp1s0: authenticate with 90:21:06:07:22:45 [ 38.413677] wlp1s0: send auth to 90:21:06:07:22:45 (try 1/3) [ 38.415195] wlp1s0: authenticated [ 38.416987] wlp1s0: associate with 90:21:06:07:22:45 (try 1/3) [ 38.421367] wlp1s0: RX AssocResp from 90:21:06:07:22:45 (capab=0x1411 status=0 aid=5) [ 38.421490] wlp1s0: associated [ 38.421526] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 38.424128] cfg80211: Regulatory domain changed to country: DE [ 38.424131] cfg80211: DFS Master region: ETSI [ 38.424132] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 38.424134] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 38.424135] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 38.424137] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 38.424138] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 38.424140] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 38.565592] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:21:06:07:22:45 [ 100.791870] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 163.727304] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 165.519193] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 343.859237] powercap intel-rapl:0: package locked by BIOS, monitoring only [ 2272.487679] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2272.534214] JFS: nTxBlock = 8192, nTxLock = 65536 [ 2272.575976] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 2272.641572] QNX4 filesystem 0.2.3 registered. [ 2272.758540] raid6: mmxx1 gen() 3716 MB/s [ 2272.826530] raid6: mmxx2 gen() 4332 MB/s [ 2272.894537] raid6: sse1x1 gen() 3416 MB/s [ 2272.962522] raid6: sse1x2 gen() 4339 MB/s [ 2273.030518] raid6: sse2x1 gen() 7123 MB/s [ 2273.098512] raid6: sse2x1 xor() 5504 MB/s [ 2273.166497] raid6: sse2x2 gen() 8829 MB/s [ 2273.234498] raid6: sse2x2 xor() 6121 MB/s [ 2273.234502] raid6: using algorithm sse2x2 gen() 8829 MB/s [ 2273.234504] raid6: .... xor() 6121 MB/s, rmw enabled [ 2273.234506] raid6: using ssse3x1 recovery algorithm [ 2273.253632] xor: automatically using best checksumming function: [ 2273.290489] avx : 19100.000 MB/sec [ 2273.371545] Btrfs loaded [ 2546.481358] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 2546.573875] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101 [ 2546.573880] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2546.573890] usb 1-1.1: Product: USB 2.0 Hub [ 2546.574185] hub 1-1.1:1.0: USB hub found [ 2546.574247] hub 1-1.1:1.0: 4 ports detected [ 2576.198388] hud-service[1501]: segfault at b772ba74 ip b772ba74 sp bfacd230 error 15 in ld-2.23.so[b772b000+1000] [ 2576.815784] wlp1s0: deauthenticating from 90:21:06:07:22:45 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2576.846411] cfg80211: World regulatory domain updated: [ 2576.846418] cfg80211: DFS Master region: unset [ 2576.846420] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 2576.846424] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2576.846426] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2576.846427] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 2576.846430] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 2576.846432] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 2576.846434] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 2576.846436] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 2576.846438] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 2595.486898] wlp1s0: authenticate with 90:21:06:07:22:45 [ 2595.502792] wlp1s0: send auth to 90:21:06:07:22:45 (try 1/3) [ 2595.504301] wlp1s0: authenticated [ 2595.506204] wlp1s0: associate with 90:21:06:07:22:45 (try 1/3) [ 2595.512172] wlp1s0: RX AssocResp from 90:21:06:07:22:45 (capab=0x1411 status=0 aid=5) [ 2595.512311] wlp1s0: associated [ 2595.517358] cfg80211: Regulatory domain changed to country: DE [ 2595.517362] cfg80211: DFS Master region: ETSI [ 2595.517364] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 2595.517368] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2595.517371] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 2595.517374] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 2595.517376] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 2595.517378] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 2595.612904] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:21:06:07:22:45 [ 2603.565648] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 2604.013623] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 2604.461604] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 2604.909561] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 2605.357530] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 2605.869487] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 2853.785637] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 2853.880396] usb 2-1.1: New USB device found, idVendor=0930, idProduct=6545 [ 2853.880407] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2853.880421] usb 2-1.1: Product: DataTraveler 2.0 [ 2853.880423] usb 2-1.1: Manufacturer: Kingston [ 2853.880425] usb 2-1.1: SerialNumber: 0014785FE5905B8A0E020078 [ 2853.996204] usb-storage 2-1.1:1.0: USB Mass Storage device detected [ 2853.996296] scsi host6: usb-storage 2-1.1:1.0 [ 2853.996401] usbcore: registered new interface driver usb-storage [ 2854.000029] usbcore: registered new interface driver uas [ 2854.994406] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 2854.995143] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2857.152482] sd 6:0:0:0: [sdb] 7936000 512-byte logical blocks: (4.06 GB/3.78 GiB) [ 2857.153097] sd 6:0:0:0: [sdb] Write Protect is off [ 2857.153100] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2857.153817] sd 6:0:0:0: [sdb] No Caching mode page found [ 2857.153820] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2857.203984] sdb: sdb1 [ 2857.206849] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 2859.337942] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 2919.861437] usb 1-1.1.4: new high-speed USB device number 4 using ehci-pci [ 2920.035252] usb 1-1.1.4: New USB device found, idVendor=0bc2, idProduct=231a [ 2920.035262] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2920.035267] usb 1-1.1.4: Product: Expansion [ 2920.035271] usb 1-1.1.4: Manufacturer: Seagate [ 2920.035276] usb 1-1.1.4: SerialNumber: NA82S7AF [ 2920.036576] scsi host7: uas [ 2920.038024] scsi 7:0:0:0: Direct-Access Seagate Expansion 0706 PQ: 0 ANSI: 6 [ 2920.040644] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 2922.421461] usb 1-1.1.4: stat urb: status -71 [ 2922.634548] usb 1-1.1.4: USB disconnect, device number 4 [ 2922.634725] sd 7:0:0:0: tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD [ 2922.634733] sd 7:0:0:0: tag#0 CDB: Test Unit Ready 00 00 00 00 00 00 [ 2922.757383] sd 7:0:0:0: [sdc] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 2922.757396] sd 7:0:0:0: [sdc] Sense not available. [ 2922.877386] sd 7:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 2922.877398] sd 7:0:0:0: [sdc] Sense not available. [ 2922.965350] sd 7:0:0:0: [sdc] Write Protect is off [ 2922.965361] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 2923.005238] sd 7:0:0:0: [sdc] Asking for cache data failed [ 2923.005248] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 2923.241293] sd 7:0:0:0: [sdc] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 2923.241303] sd 7:0:0:0: [sdc] Sense not available. [ 2923.361310] sd 7:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 2923.361322] sd 7:0:0:0: [sdc] Sense not available. [ 2923.449431] sd 7:0:0:0: [sdc] Write Protect is on [ 2923.449445] sd 7:0:0:0: [sdc] Mode Sense: 10 89 f3 e8 [ 2923.561233] sd 7:0:0:0: [sdc] Attached SCSI disk [ 2923.789229] usb 1-1.1.4: new high-speed USB device number 5 using ehci-pci [ 2923.962990] usb 1-1.1.4: New USB device found, idVendor=0bc2, idProduct=231a [ 2923.962999] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2923.963004] usb 1-1.1.4: Product: Expansion [ 2923.963008] usb 1-1.1.4: Manufacturer: Seagate [ 2923.963012] usb 1-1.1.4: SerialNumber: NA82S7AF [ 2923.964134] scsi host8: uas [ 2923.966866] scsi 8:0:0:0: Direct-Access Seagate Expansion 0706 PQ: 0 ANSI: 6 [ 2923.968769] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 2944.683839] usb 1-1.1.4: stat urb: status -71 [ 2944.903822] usb 1-1.1: USB disconnect, device number 3 [ 2944.903829] usb 1-1.1.4: USB disconnect, device number 5 [ 2944.903997] sd 8:0:0:0: tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD [ 2944.904004] sd 8:0:0:0: tag#0 CDB: Test Unit Ready 00 00 00 00 00 00 [ 2945.027928] sd 8:0:0:0: [sdc] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 2945.027939] sd 8:0:0:0: [sdc] Sense not available. [ 2945.147904] sd 8:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 2945.147915] sd 8:0:0:0: [sdc] Sense not available. [ 2945.235833] sd 8:0:0:0: [sdc] Write Protect is off [ 2945.235855] sd 8:0:0:0: [sdc] Mode Sense: 32 41 21 0b [ 2945.275919] sd 8:0:0:0: [sdc] Asking for cache data failed [ 2945.275936] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 2945.507858] sd 8:0:0:0: [sdc] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 2945.507880] sd 8:0:0:0: [sdc] Sense not available. [ 2945.627916] sd 8:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 2945.627929] sd 8:0:0:0: [sdc] Sense not available. [ 2945.827902] sd 8:0:0:0: [sdc] Attached SCSI disk [ 2955.835183] usb 1-1.1: new high-speed USB device number 6 using ehci-pci [ 2956.009439] usb 1-1.1: New USB device found, idVendor=0bc2, idProduct=231a [ 2956.009449] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2956.009454] usb 1-1.1: Product: Expansion [ 2956.009459] usb 1-1.1: Manufacturer: Seagate [ 2956.009463] usb 1-1.1: SerialNumber: NA82S7AF [ 2956.013901] scsi host9: uas [ 2956.015157] scsi 9:0:0:0: Direct-Access Seagate Expansion 0706 PQ: 0 ANSI: 6 [ 2956.017503] sd 9:0:0:0: Attached scsi generic sg3 type 0 [ 2958.895137] sd 9:0:0:0: [sdc] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2958.895148] sd 9:0:0:0: [sdc] 4096-byte physical blocks [ 2958.896430] sd 9:0:0:0: [sdc] Write Protect is off [ 2958.896438] sd 9:0:0:0: [sdc] Mode Sense: 53 00 00 08 [ 2958.897180] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2958.913480] sdc: sdc1 [ 2958.916806] sd 9:0:0:0: [sdc] Attached SCSI disk