System ----------------------- K3b Version: 0.12.17 KDE Version: 3.5.5 QT Version: 3.3.6 Kernel: 2.6.17-10-generic Devices ----------------------- HL-DT-ST DVDRAM GMA-4082N HA01 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] K3b ----------------------- Size of filesystem calculated: 8744 Used versions ----------------------- cdrecord: 2.1.1a03 cdrecord ----------------------- /usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.17-10-generic /usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer. /usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.33 /usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). SCSI buffer size: 64512 /usr/bin/X11/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. /usr/bin/X11/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support. Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to . The original author should not be bothered with problems of this version. TOC Type: 1 = CD-ROM Using libscg version 'debian-0.8debian2'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GMA-4082N' Revision : 'HA01' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x0012 Profile: 0x0011 Profile: 0x0015 Profile: 0x0014 Profile: 0x0013 Profile: 0x001A Profile: 0x001B Profile: 0x002B Profile: 0x0010 Profile: 0x0009 (current) Profile: 0x000A Profile: 0x0008 Profile: 0x0002 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB Drive DMA Speed: 13725 kB/s 77x CD 9x DVD FIFO size : 4194304 = 4096 KB Track 01: data 17 MB Total size: 19 MB (01:56.58) = 8744 sectors Lout start: 19 MB (01:58/44) = 8744 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12508 (97:15/17) ATIP start of lead out: 359845 (79:59/70) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 22 Manufacturer: Ritek Co. Blocks total: 359845 Blocks current: 359845 Blocks remaining: 351101 Starting to write CD/DVD at speed 24 in dummy SAO mode for single session. Last chance to quit, starting dummy write in 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Sending CUE sheet... /usr/bin/X11/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 /usr/bin/X11/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.016s timeout 200s /usr/bin/X11/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.016s timeout 200s /usr/bin/X11/cdrecord: A write error occured. /usr/bin/X11/cdrecord: Please properly read the error message above. Writing pregap for track 1 at -150 write track pad data: error after 0 bytes BFree: 1029 K BSize: 1029 K Starting new track at sector: 0 Track 01: 0 of 17 MB written. write track data: error after 0 bytes Writing time: 34.407s Average write speed 3.4x. Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.004s /usr/bin/X11/cdrecord: fifo had 64 puts and 1 gets. /usr/bin/X11/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=1,0,0 speed=24 -dao -dummy driveropts=burnfree -eject -data -tsize=8744s - mkisofs ----------------------- 8744 INFO: UTF-8 character encoding detected by locale settings. Assuming UTF-8 encoded filenames on source filesystem, use -input-charset to override. 5.84% done, estimate finish Sun Nov 5 18:25:24 2006 11.52% done, estimate finish Sun Nov 5 18:25:07 2006 17.19% done, estimate finish Sun Nov 5 18:25:01 2006 23.04% done, estimate finish Sun Nov 5 18:24:58 2006 mkisofs command: ----------------------- /usr/bin/X11/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-richard/k3bNaL4Cb.tmp -rational-rock -hide-list /tmp/kde-richard/k3bfTcbXa.tmp -joliet -hide-joliet-list /tmp/kde-richard/k3bLgjiic.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-richard/k3bXbMQna.tmp