>wodim --version Cdrecord-yelling-line-to-tell-frontends-to-use-it-like-version 2.01.01a03-dvd Wodim 1.1.10 Copyright (C) 2006 Cdrkit suite contributors Based on works from Joerg Schilling, Copyright (C) 1995-2006, J. Schilling >wodim -v -v timeout=600 speed=4 dev=/dev/sr1 ~/BigFiles/Angel.Season1.iso wodim: No write mode specified. wodim: Assuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. TOC Type: 1 = CD-ROM scsidev: '/dev/sr1' devname: '/dev/sr1' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.10 Using libusal version 'Cdrkit-1.1.10'. SCSI buffer size: 64512 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identification : 'DVDRW LH-20A1L ' Revision : 'BL06' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x002B (DVD+R/DL) Profile: 0x002B (DVD+R/DL) (current) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using Session At Once (SAO) for DVD mode. Drive current speed: 8 Drive default speed: 8 Drive max speed : 8 Selected speed : 4 Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1068032 = 1043 KB Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. FIFO size : 12582912 = 12288 KB Track 01: data 8137 MB track: 1 start: 0 pregap: 150 Total size: 9344 MB (925:49.01) = 4166176 sectors Lout start: 9345 MB (925:51/01) = 4166176 sectors Track 1 start 0 Track 2 start 4166176 Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: 7648 Speed set to 5540 KB/s Starting to write CD/DVD at speed 4.0 in real unknown mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 4075 of 8137 MB written (fifo 100%) [buf 99%] 4.1x.wodim: faio_wait_on_buffer for writer timed out. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 1F D7 E9 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00 Sense Key: 0x0 No Additional Sense, Segment 11 Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 601.680s timeout 600s write track data: error after 4273948672 bytes wodim: A write error occured. wodim: Please properly read the error message above. Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.483s timeout 600s Writing time: 1444.345s Average write speed 4.5x. Min drive buffer fill was 97% Fixating... Errno: 5 (Input/output error), flush cache scsi sendcmd: no error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.479s timeout 600s Trouble flushing the cache wodim: Cannot fixate disk. Fixating time: 0.479s wodim: fifo had 67510 puts and 67320 gets. wodim: fifo was 0 times empty and 38435 times full, min fill was 93%.