Devices ----------------------- HL-DT-ST DVDRAM GH24NS50 XP02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [TAO, Riscrittura limitata, Livello Jump] [%7] K3b::IsoImager ----------------------- mkisofs print size result: 34219 (70080512 bytes) System ----------------------- K3b Version: 2.0.2 KDE Version: 4.8.4 (4.8.4) QT Version: 4.8.1 Kernel: 3.2.0-23-lowlatency Used versions ----------------------- mkisofs: 1.1.11 cdrecord: 1.1.11 cdrecord ----------------------- scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.11 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 3 = CD-ROM XA mode 2 Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identification : 'DVDRAM GH24NS50 ' Revision : 'XP02' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x000A (CD-RW) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x001A (DVD+RW) Profile: 0x001B (DVD+R) Profile: 0x002B (DVD+R/DL) Profile: 0x0010 (DVD-ROM) Profile: 0x0009 (CD-R) Profile: 0x000A (CD-RW) (current) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB Drive DMA Speed: 16168 kB/s 91x CD 11x DVD FIFO size : 12582912 = 12288 KB Speed set to 2822 KB/s Track 01: data 66 MB Total size: 76 MB (07:36.28) = 34221 sectors Lout start: 77 MB (07:38/21) = 34221 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 6 Reference speed: 0 Is not unrestricted Is erasable Disk sub type: Ultra High speed Rewritable media (2) ATIP start of lead in: -11744 (97:25/31) ATIP start of lead out: 359848 (79:59/73) 1T speed low: 16 1T speed high: 16 2T speed low: 8 2T speed high: 24 power mult factor: 1 4 recommended erase/write power: 3 A1 values: 66 18 B8 A2 values: 38 80 00 A3 values: 04 CF 88 Disk type: Phase change Manuf. index: 40 Manufacturer: INFODISC Technology Co., Ltd. Blocks total: 359848 Blocks current: 359848 Blocks remaining: 325627 Starting to write CD/DVD at speed 16.0 in real TAO mode for multi session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 0 of 66 MB written. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 90 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 40s /usr/bin/wodim: A write error occured. /usr/bin/wodim: Please properly read the error message above. write track data: error after 0 bytes Writing time: 5.071s Average write speed 90.8x. Fixating... Errno: 5 (Input/output error), close track/session scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 5B 00 00 90 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 480s === last message repeated 2 times. === /usr/bin/wodim: Cannot fixate disk. Fixating time: 0.006s /usr/bin/wodim: fifo had 191 puts and 1 gets. /usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=16 -tao driveropts=burnfree -multi -xa -tsize=34219s - mkisofs ----------------------- 34219 I: -input-charset not specified, using utf-8 (detected in locale settings) 1.50% done, estimate finish Wed Jul 18 22:19:10 2012 2.95% done, estimate finish Wed Jul 18 22:17:31 2012 4.42% done, estimate finish Wed Jul 18 22:16:57 2012 5.87% done, estimate finish Wed Jul 18 22:16:41 2012 7.32% done, estimate finish Wed Jul 18 22:16:30 2012 8.77% done, estimate finish Wed Jul 18 22:16:24 2012 10.27% done, estimate finish Wed Jul 18 22:16:19 2012 11.72% done, estimate finish Wed Jul 18 22:16:15 2012 13.15% done, estimate finish Wed Jul 18 22:16:12 2012 14.65% done, estimate finish Wed Jul 18 22:16:10 2012 16.10% done, estimate finish Wed Jul 18 22:16:08 2012 mkisofs calculate size command: ----------------------- /usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Zero -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-enzo/k3bWr2606.tmp -rational-rock -hide-list /tmp/kde-enzo/k3bBz2606.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-enzo/k3bwD2606.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-enzo/k3bmN2606.tmp mkisofs command: ----------------------- /usr/bin/genisoimage -gui -graft-points -volid Zero -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-enzo/k3bYM2606.tmp -rational-rock -hide-list /tmp/kde-enzo/k3bll2606.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-enzo/k3brc2606.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-enzo/k3bHZ2606.tmp