[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-22-generic (buildd@allspice) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4) [ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- locale=pt_BR console-setup/layoutcode?=br console-setup/modelcode?=abnt2 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] modified: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] modified: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] modified: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 16000-19000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 18000-1a000 [ 0.000000] RAMDISK: 7f4c1000 - 80000000 [ 0.000000] ACPI: RSDP 00000000000fb4f0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff90100 00054 (v01 010710 XSDT1230 20100107 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 010710 FACP1230 20100107 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20100428/tbfadt-557) [ 0.000000] ACPI: DSDT 00000000cff90450 0D0E8 (v01 A1391 A1391001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cffa8000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 0007C (v01 010710 APIC1230 20100107 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 010710 OEMMCFG 20100107 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 010710 OEMB1230 20100107 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff9f450 00038 (v01 010710 OEMHPET 20100107 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9f490 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880100200000-ffff880103bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048350 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3926 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [19000 - 197ff] [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000 [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000 [ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u262144 [ 0.000000] pcpu-alloc: s91520 r8192 d23168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031326 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- locale=pt_BR console-setup/layoutcode?=br console-setup/modelcode?=abnt2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] early_res array is doubled to 128 at [19800 - 1a7ff] [ 0.000000] Subtract (59 early reservations) [ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS [ 0.000000] #2 [007f4c1000 - 0080000000] RAMDISK [ 0.000000] #3 [0001d18000 - 0001d18340] BRK [ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved [ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf [ 0.000000] #6 [000009ec00 - 00000e3bf0] BIOS reserved [ 0.000000] #7 [00000e3d74 - 00000ff780] BIOS reserved [ 0.000000] #8 [00000e3bf0 - 00000e3d74] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 0000018000] PGTABLE [ 0.000000] #12 [0000018000 - 0000019000] PGTABLE [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #14 [0001d18340 - 0001d19340] BOOTMEM [ 0.000000] #15 [0001d17140 - 0001d17440] BOOTMEM [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #18 [0100200000 - 0103c00000] MEMMAP 0 [ 0.000000] #19 [0001d17440 - 0001d175c0] BOOTMEM [ 0.000000] #20 [0001d19340 - 0001d31340] BOOTMEM [ 0.000000] #21 [0001d31340 - 0001d37340] BOOTMEM [ 0.000000] #22 [0001d38000 - 0001d39000] BOOTMEM [ 0.000000] #23 [0001d175c0 - 0001d17601] BOOTMEM [ 0.000000] #24 [0001d17640 - 0001d17683] BOOTMEM [ 0.000000] #25 [0001d176c0 - 0001d178f0] BOOTMEM [ 0.000000] #26 [0001d17900 - 0001d17968] BOOTMEM [ 0.000000] #27 [0001d17980 - 0001d179e8] BOOTMEM [ 0.000000] #28 [0001d17a00 - 0001d17a68] BOOTMEM [ 0.000000] #29 [0001d17a80 - 0001d17ae8] BOOTMEM [ 0.000000] #30 [0001d17b00 - 0001d17b68] BOOTMEM [ 0.000000] #31 [0001d17b80 - 0001d17be8] BOOTMEM [ 0.000000] #32 [0001d17c00 - 0001d17c68] BOOTMEM [ 0.000000] #33 [0001d17c80 - 0001d17ce8] BOOTMEM [ 0.000000] #34 [0001d17d00 - 0001d17d68] BOOTMEM [ 0.000000] #35 [0001d17d80 - 0001d17da0] BOOTMEM [ 0.000000] #36 [0001d17dc0 - 0001d17de0] BOOTMEM [ 0.000000] #37 [0001d17e00 - 0001d17e9e] BOOTMEM [ 0.000000] #38 [0001d17ec0 - 0001d17f5e] BOOTMEM [ 0.000000] #39 [0001e00000 - 0001e1e000] BOOTMEM [ 0.000000] #40 [0001e40000 - 0001e5e000] BOOTMEM [ 0.000000] #41 [0001e80000 - 0001e9e000] BOOTMEM [ 0.000000] #42 [0001ec0000 - 0001ede000] BOOTMEM [ 0.000000] #43 [0001f00000 - 0001f1e000] BOOTMEM [ 0.000000] #44 [0001f40000 - 0001f5e000] BOOTMEM [ 0.000000] #45 [0001d17f80 - 0001d17f88] BOOTMEM [ 0.000000] #46 [0001d17fc0 - 0001d17fc8] BOOTMEM [ 0.000000] #47 [0001d37340 - 0001d37358] BOOTMEM [ 0.000000] #48 [0001d37380 - 0001d373b0] BOOTMEM [ 0.000000] #49 [0001d373c0 - 0001d374e0] BOOTMEM [ 0.000000] #50 [0001d37500 - 0001d37548] BOOTMEM [ 0.000000] #51 [0001d37580 - 0001d375c8] BOOTMEM [ 0.000000] #52 [0001d39000 - 0001d41000] BOOTMEM [ 0.000000] #53 [0020000000 - 0024000000] BOOTMEM [ 0.000000] #54 [0001d37600 - 0001d37620] BOOTMEM [ 0.000000] #55 [0001f5e000 - 0005f5e000] BOOTMEM [ 0.000000] #56 [0001d41000 - 0001d61000] BOOTMEM [ 0.000000] #57 [0001d61000 - 0001da1000] BOOTMEM [ 0.000000] #58 [000001a800 - 0000022800] BOOTMEM [ 0.000000] Memory: 3976644k/4980736k available (5708k kernel code, 787336k absent, 216756k reserved, 5382k data, 908k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:728 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3012.813 MHz processor. [ 0.020007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6025.61 BogoMIPS (lpj=30128090) [ 0.020011] pid_max: default: 32768 minimum: 301 [ 0.020027] Security Framework initialized [ 0.020041] AppArmor: AppArmor initialized [ 0.020042] Yama: becoming mindful. [ 0.020376] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021451] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.021922] Mount-cache hash table entries: 256 [ 0.022009] Initializing cgroup subsys ns [ 0.022011] Initializing cgroup subsys cpuacct [ 0.022014] Initializing cgroup subsys memory [ 0.022021] Initializing cgroup subsys devices [ 0.022022] Initializing cgroup subsys freezer [ 0.022024] Initializing cgroup subsys net_cls [ 0.022042] tseg: 0000000000 [ 0.022052] CPU: Physical Processor ID: 0 [ 0.022053] CPU: Processor Core ID: 0 [ 0.022055] mce: CPU supports 6 MCE banks [ 0.022062] using C1E aware idle routine [ 0.022064] Performance Events: AMD PMU driver. [ 0.022067] ... version: 0 [ 0.022068] ... bit width: 48 [ 0.022069] ... generic registers: 4 [ 0.022070] ... value mask: 0000ffffffffffff [ 0.022071] ... max period: 00007fffffffffff [ 0.022072] ... fixed-purpose events: 0 [ 0.022073] ... event mask: 000000000000000f [ 0.023318] ACPI: Core revision 20100428 [ 0.040006] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040009] ftrace: allocating 22680 entries in 89 pages [ 0.044957] Setting APIC routing to flat [ 0.045251] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.148062] CPU0: AMD Phenom(tm) II X4 945 Processor stepping 03 [ 0.150000] Booting Node 0, Processors #1 [ 0.310016] System has AMD C1E enabled [ 0.310027] Switch to broadcast mode on CPU1 [ 0.310043] #2 [ 0.480018] Switch to broadcast mode on CPU2 [ 0.480051] #3 [ 0.650014] Brought up 4 CPUs [ 0.650016] Total of 4 processors activated (24106.27 BogoMIPS). [ 0.650017] Switch to broadcast mode on CPU3 [ 0.651756] Switch to broadcast mode on CPU0 [ 0.651756] devtmpfs: initialized [ 0.651756] regulator: core version 0.5 [ 0.651756] Time: 9:57:04 Date: 11/10/10 [ 0.651756] NET: Registered protocol family 16 [ 0.651756] node 0 link 0: io port [1000, ffffff] [ 0.651756] TOM: 00000000d0000000 aka 3328M [ 0.651756] Fam 10h mmconf [e0000000, efffffff] [ 0.651756] node 0 link 0: mmio [a0000, bffff] [ 0.651756] node 0 link 0: mmio [d0000000, dfffffff] [ 0.651756] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.651756] node 0 link 0: mmio [f0000000, ffefffff] [ 0.651756] TOM2: 0000000130000000 aka 4864M [ 0.651756] bus: [00, 07] on node 0 link 0 [ 0.651756] bus: 00 index 0 [io 0x0000-0xffff] [ 0.651756] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.651756] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] [ 0.651756] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.651756] bus: 00 index 4 [mem 0x130000000-0xfcffffffff] [ 0.651756] ACPI: bus type pci registered [ 0.651756] Trying to unpack rootfs image as initramfs... [ 0.651756] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.651756] PCI: not using MMCONFIG [ 0.651756] PCI: Using configuration type 1 for base access [ 0.651756] PCI: Using configuration type 1 for extended access [ 0.651756] bio: create slab at 0 [ 0.651756] ACPI: EC: Look up EC in DSDT [ 0.652829] ACPI: Executed 3 blocks of module-level executable AML code [ 0.732370] ACPI: Interpreter enabled [ 0.732373] ACPI: (supports S0 S1 S3 S4 S5) [ 0.732391] ACPI: Using IOAPIC for interrupt routing [ 0.732439] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.734862] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.758681] ACPI Warning: Incorrect checksum in table [OEMB] - 0xA8, should be 0xA3 (20100428/tbutils-314) [ 0.758782] ACPI: No dock devices found. [ 0.758784] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.758907] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.759156] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.759158] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.759160] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.759162] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.759164] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] [ 0.759166] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.759226] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.759228] pci 0000:00:02.0: PME# disabled [ 0.759264] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.759266] pci 0000:00:0a.0: PME# disabled [ 0.759303] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] [ 0.759309] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] [ 0.759314] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] [ 0.759320] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] [ 0.759326] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] [ 0.759332] pci 0000:00:11.0: reg 24: [mem 0xf9fffc00-0xf9ffffff] [ 0.759348] pci 0000:00:11.0: set SATA to AHCI mode [ 0.759387] pci 0000:00:12.0: reg 10: [mem 0xf9ffe000-0xf9ffefff] [ 0.759435] pci 0000:00:12.1: reg 10: [mem 0xf9ffd000-0xf9ffdfff] [ 0.759493] pci 0000:00:12.2: reg 10: [mem 0xf9fff800-0xf9fff8ff] [ 0.759540] pci 0000:00:12.2: supports D1 D2 [ 0.759541] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.759545] pci 0000:00:12.2: PME# disabled [ 0.759573] pci 0000:00:13.0: reg 10: [mem 0xf9ffc000-0xf9ffcfff] [ 0.759621] pci 0000:00:13.1: reg 10: [mem 0xf9ffb000-0xf9ffbfff] [ 0.759679] pci 0000:00:13.2: reg 10: [mem 0xf9fff400-0xf9fff4ff] [ 0.759726] pci 0000:00:13.2: supports D1 D2 [ 0.759727] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.759731] pci 0000:00:13.2: PME# disabled [ 0.759826] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.759832] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.759838] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.759843] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.759849] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.759904] pci 0000:00:14.2: reg 10: [mem 0xf9ff4000-0xf9ff7fff 64bit] [ 0.759942] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.759945] pci 0000:00:14.2: PME# disabled [ 0.760069] pci 0000:00:14.5: reg 10: [mem 0xf9ffa000-0xf9ffafff] [ 0.760196] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.760203] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.760210] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.760215] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f] [ 0.760219] pci 0000:01:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref] [ 0.780014] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.780018] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.780021] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfeafffff] [ 0.780024] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.780065] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.780078] pci 0000:02:00.0: reg 18: [mem 0xf8fff000-0xf8ffffff 64bit pref] [ 0.780088] pci 0000:02:00.0: reg 20: [mem 0xf8ff8000-0xf8ffbfff 64bit pref] [ 0.780093] pci 0000:02:00.0: reg 30: [mem 0xfebf0000-0xfebfffff pref] [ 0.780121] pci 0000:02:00.0: supports D1 D2 [ 0.780122] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.780126] pci 0000:02:00.0: PME# disabled [ 0.800016] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.800020] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.800022] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.800025] pci 0000:00:0a.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.800084] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.800088] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.800092] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.800096] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.800098] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.800099] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.800101] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.800103] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.800104] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 0.800106] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.800120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.800284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.800343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.800402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.803848] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) [ 0.803944] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.804036] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.804127] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.804219] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.804310] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.804402] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.804494] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.804528] HEST: Table is not found! [ 0.804575] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.804577] vgaarb: loaded [ 0.804660] SCSI subsystem initialized [ 0.804674] libata version 3.00 loaded. [ 0.804674] usbcore: registered new interface driver usbfs [ 0.804674] usbcore: registered new interface driver hub [ 0.804674] usbcore: registered new device driver usb [ 0.804674] ACPI: WMI: Mapper loaded [ 0.804674] PCI: Using ACPI for IRQ routing [ 0.804674] PCI: pci_cache_line_size set to 64 bytes [ 0.804674] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.804674] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff [ 0.804674] NetLabel: Initializing [ 0.804674] NetLabel: domain hash size = 128 [ 0.804674] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.804674] NetLabel: unlabeled traffic allowed by default [ 0.804674] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.804674] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.804674] Switching to clocksource tsc [ 1.899619] AppArmor: AppArmor Filesystem Enabled [ 1.899632] pnp: PnP ACPI init [ 1.899648] ACPI: bus type pnp registered [ 1.900000] pnp: PnP ACPI: found 15 devices [ 1.900000] ACPI: ACPI bus type pnp unregistered [ 1.900000] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.900000] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.900000] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 1.900000] system 00:0b: [io 0x040b] has been reserved [ 1.900000] system 00:0b: [io 0x04d6] has been reserved [ 1.900000] system 00:0b: [io 0x0c00-0x0c01] has been reserved [ 1.900000] system 00:0b: [io 0x0c14] has been reserved [ 1.900000] system 00:0b: [io 0x0c50-0x0c51] has been reserved [ 1.900000] system 00:0b: [io 0x0c52] has been reserved [ 1.900000] system 00:0b: [io 0x0c6c] has been reserved [ 1.900000] system 00:0b: [io 0x0c6f] has been reserved [ 1.900000] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved [ 1.900000] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved [ 1.900000] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved [ 1.900000] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved [ 1.900000] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved [ 1.900000] system 00:0b: [io 0x0b00-0x0b3f] has been reserved [ 1.900000] system 00:0b: [io 0x0800-0x089f] has been reserved [ 1.900000] system 00:0b: [io 0x0b00-0x0b0f] has been reserved [ 1.900000] system 00:0b: [io 0x0b20-0x0b3f] has been reserved [ 1.900000] system 00:0b: [io 0x0900-0x090f] has been reserved [ 1.900000] system 00:0b: [io 0x0910-0x091f] has been reserved [ 1.900000] system 00:0b: [io 0xfe00-0xfefe] has been reserved [ 1.900000] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved [ 1.900000] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved [ 1.900000] system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved [ 1.900000] system 00:0c: [io 0x0230-0x023f] has been reserved [ 1.900000] system 00:0c: [io 0x0290-0x029f] has been reserved [ 1.900000] system 00:0c: [io 0x0300-0x030f] has been reserved [ 1.900000] system 00:0c: [io 0x0a30-0x0a3f] has been reserved [ 1.900000] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 1.900000] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.900000] system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved [ 1.900000] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.900000] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved [ 1.900000] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.905351] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 1.905354] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 1.905356] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfeafffff] [ 1.905359] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.905362] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 1.905364] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.905366] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 1.905369] pci 0000:00:0a.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 1.905372] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 1.905373] pci 0000:00:14.4: bridge window [io disabled] [ 1.905377] pci 0000:00:14.4: bridge window [mem disabled] [ 1.905380] pci 0000:00:14.4: bridge window [mem pref disabled] [ 1.905393] alloc irq_desc for 18 on node 0 [ 1.905394] alloc kstat_irqs on node 0 [ 1.905402] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.905405] pci 0000:00:02.0: setting latency timer to 64 [ 1.905410] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.905412] pci 0000:00:0a.0: setting latency timer to 64 [ 1.905419] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.905421] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.905423] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.905424] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 1.905426] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff] [ 1.905427] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 1.905429] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.905431] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff] [ 1.905432] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.905434] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 1.905436] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] [ 1.905437] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 1.905439] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 1.905441] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 1.905442] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 1.905444] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 1.905445] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff] [ 1.905447] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] [ 1.905476] NET: Registered protocol family 2 [ 1.905599] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.906568] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.909124] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.909441] TCP: Hash tables configured (established 524288 bind 65536) [ 1.909443] TCP reno registered [ 1.909451] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.909484] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.909586] NET: Registered protocol family 1 [ 2.080060] pci 0000:01:00.0: Boot video device [ 2.080066] PCI: CLS 64 bytes, default 64 [ 2.080717] PCI-DMA: Disabling AGP. [ 2.080798] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 2.080799] PCI-DMA: using GART IOMMU. [ 2.080802] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 2.084007] Scanning for low memory corruption every 60 seconds [ 2.084094] audit: initializing netlink socket (disabled) [ 2.084107] type=2000 audit(1289383025.080:1): initialized [ 2.093253] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.094227] VFS: Disk quotas dquot_6.5.2 [ 2.094263] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.094670] fuse init (API version 7.14) [ 2.094720] msgmni has been set to 7895 [ 2.095141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.095143] io scheduler noop registered [ 2.095145] io scheduler deadline registered [ 2.095170] io scheduler cfq registered (default) [ 2.095252] pcieport 0000:00:02.0: setting latency timer to 64 [ 2.095270] alloc irq_desc for 40 on node 0 [ 2.095271] alloc kstat_irqs on node 0 [ 2.095278] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 2.095337] pcieport 0000:00:0a.0: setting latency timer to 64 [ 2.095351] alloc irq_desc for 41 on node 0 [ 2.095352] alloc kstat_irqs on node 0 [ 2.095356] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X [ 2.095407] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.095420] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.095528] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.095532] ACPI: Power Button [PWRB] [ 2.095559] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.095561] ACPI: Power Button [PWRF] [ 2.095783] ACPI: acpi_idle registered with cpuidle [ 2.098875] ERST: Table is not found! [ 2.099004] Linux agpgart interface v0.103 [ 2.099007] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.099105] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.099338] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.099988] brd: module loaded [ 2.100303] loop: module loaded [ 2.100467] alloc irq_desc for 16 on node 0 [ 2.100468] alloc kstat_irqs on node 0 [ 2.100473] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.100494] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 2.100706] Fixed MDIO Bus: probed [ 2.100726] PPP generic driver version 2.4.2 [ 2.100753] tun: Universal TUN/TAP device driver, 1.6 [ 2.100755] tun: (C) 1999-2004 Max Krasnyansky [ 2.100807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.100835] alloc irq_desc for 17 on node 0 [ 2.100837] alloc kstat_irqs on node 0 [ 2.100840] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.100855] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.100881] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.100909] ehci_hcd 0000:00:12.2: debug port 1 [ 2.100926] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9fff800 [ 2.120031] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.120115] hub 1-0:1.0: USB hub found [ 2.120118] hub 1-0:1.0: 6 ports detected [ 2.120210] alloc irq_desc for 19 on node 0 [ 2.120211] alloc kstat_irqs on node 0 [ 2.120216] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.120227] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.120250] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.120273] ehci_hcd 0000:00:13.2: debug port 1 [ 2.120291] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9fff400 [ 2.140031] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.140106] hub 2-0:1.0: USB hub found [ 2.140108] hub 2-0:1.0: 6 ports detected [ 2.140179] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.140214] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.140227] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.140249] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 2.140270] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9ffe000 [ 2.204106] hub 3-0:1.0: USB hub found [ 2.204112] hub 3-0:1.0: 3 ports detected [ 2.204205] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.204218] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 2.204241] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.204257] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9ffd000 [ 2.264106] hub 4-0:1.0: USB hub found [ 2.264111] hub 4-0:1.0: 3 ports detected [ 2.264204] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.264218] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.264240] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.264263] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9ffc000 [ 2.324109] hub 5-0:1.0: USB hub found [ 2.324115] hub 5-0:1.0: 3 ports detected [ 2.324208] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.324221] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.324244] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.324259] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9ffb000 [ 2.384104] hub 6-0:1.0: USB hub found [ 2.384110] hub 6-0:1.0: 3 ports detected [ 2.384202] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.384216] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.384240] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.384255] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ffa000 [ 2.444102] hub 7-0:1.0: USB hub found [ 2.444107] hub 7-0:1.0: 2 ports detected [ 2.444180] uhci_hcd: USB Universal Host Controller Interface driver [ 2.444262] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.444263] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.444384] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.444438] mice: PS/2 mouse device common for all mice [ 2.444501] rtc_cmos 00:03: RTC can wake from S4 [ 2.444528] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.444550] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.444609] device-mapper: uevent: version 1.0.3 [ 2.444702] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 2.444793] device-mapper: multipath: version 1.1.1 loaded [ 2.444795] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.444980] cpuidle: using governor ladder [ 2.444981] cpuidle: using governor menu [ 2.445162] TCP cubic registered [ 2.445242] NET: Registered protocol family 10 [ 2.445481] lo: Disabled Privacy Extensions [ 2.445608] NET: Registered protocol family 17 [ 2.445647] powernow-k8: Found 1 AMD Phenom(tm) II X4 945 Processor (4 cpu cores) (version 2.20.00) [ 2.445681] powernow-k8: 0 : pstate 0 (3000 MHz) [ 2.445683] powernow-k8: 1 : pstate 1 (2300 MHz) [ 2.445684] powernow-k8: 2 : pstate 2 (1800 MHz) [ 2.445685] powernow-k8: 3 : pstate 3 (800 MHz) [ 2.461548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.467987] PM: Resume from disk failed. [ 2.467995] registered taskstats version 1 [ 2.468166] Magic number: 2:178:980 [ 2.468240] rtc_cmos 00:03: setting system clock to 2010-11-10 09:57:06 UTC (1289383026) [ 2.468242] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.468243] EDD information not available. [ 2.476578] Freeing initrd memory: 11516k freed [ 2.479134] Freeing unused kernel memory: 908k freed [ 2.479314] Write protecting the kernel read-only data: 10240k [ 2.479433] Freeing unused kernel memory: 416k freed [ 2.479606] Freeing unused kernel memory: 1644k freed [ 2.493080] udev[138]: starting version 163 [ 2.510849] scsi0 : pata_atiixp [ 2.512208] scsi1 : pata_atiixp [ 2.513208] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.513210] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.522376] [drm] Initialized drm 1.1.0 20060810 [ 2.632625] usb 4-3: new low speed USB device using ohci_hcd and address 2 [ 2.696186] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.696204] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.696244] r8169 0000:02:00.0: setting latency timer to 64 [ 2.696272] alloc irq_desc for 42 on node 0 [ 2.696274] alloc kstat_irqs on node 0 [ 2.696284] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 2.696596] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc900006d2000, 48:5b:39:2e:b9:4a, XID 083000c0 IRQ 42 [ 2.741170] ahci 0000:00:11.0: version 3.0 [ 2.741179] alloc irq_desc for 22 on node 0 [ 2.741180] alloc kstat_irqs on node 0 [ 2.741184] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.741278] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.741281] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.741467] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.741470] nouveau 0000:01:00.0: setting latency timer to 64 [ 2.742847] scsi2 : ahci [ 2.742915] scsi3 : ahci [ 2.742966] scsi4 : ahci [ 2.743011] scsi5 : ahci [ 2.743098] ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 22 [ 2.743101] ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 22 [ 2.743104] ata5: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00 irq 22 [ 2.743107] ata6: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 22 [ 2.743805] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x098200a2) [ 2.746496] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 2.805835] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 2.805838] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 2.805840] [drm] nouveau 0000:01:00.0: Bios version 62.98.29.00 [ 2.805843] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 2.805845] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 2.805847] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04011310 00000028 [ 2.805849] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030 [ 2.805851] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02000300 00000028 [ 2.805852] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010223f1 00c0c080 [ 2.805855] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 2.805857] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 2.805858] [drm] nouveau 0000:01:00.0: 1: 0x00000200: type 0x00 idx 1 tag 0xff [ 2.805860] [drm] nouveau 0000:01:00.0: 2: 0x00000110: type 0x10 idx 2 tag 0xff [ 2.805862] [drm] nouveau 0000:01:00.0: 3: 0x00000111: type 0x11 idx 3 tag 0xff [ 2.805864] [drm] nouveau 0000:01:00.0: 4: 0x00000113: type 0x13 idx 4 tag 0xff [ 2.805871] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD40E [ 2.900224] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD785 [ 2.960120] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE02B [ 2.960129] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE11D [ 2.980193] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE2F9 [ 2.980195] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE35E [ 3.010128] [drm] nouveau 0000:01:00.0: 0xE35E: Condition still not met after 20ms, skipping following opcodes [ 3.010136] [drm] nouveau 0000:01:00.0: 0xC3D8: parsing output script 0 [ 3.010142] [drm] nouveau 0000:01:00.0: 0xAE2E: parsing output script 0 [ 3.010150] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM [ 3.090077] ata6: SATA link down (SStatus 0 SControl 300) [ 3.099959] [TTM] Zone kernel: Available graphics memory: 2028538 kiB. [ 3.099960] [TTM] Initializing pool allocator. [ 3.112212] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 3.114517] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 3.117276] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 3.117835] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 3.117837] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 3.117839] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 3.117840] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 3.117842] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 3.117880] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 3.117896] [drm] nouveau 0000:01:00.0: Detected a TV connector [ 3.117898] [drm] nouveau 0000:01:00.0: no encoders, ignoring [ 3.270053] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.270881] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.270911] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.271062] ata3.00: ATA-8: ST3250318AS, CC38, max UDMA/133 [ 3.271065] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.272244] ata3.00: configured for UDMA/133 [ 3.272325] ata5.00: ATA-8: MAXTOR STM31000340AS, MX15, max UDMA/133 [ 3.272327] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.273657] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100 [ 3.274233] ata5.00: configured for UDMA/133 [ 3.277383] ata4.00: configured for UDMA/100 [ 3.290170] scsi 2:0:0:0: Direct-Access ATA ST3250318AS CC38 PQ: 0 ANSI: 5 [ 3.290301] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.290309] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.290336] sd 2:0:0:0: [sda] Write Protect is off [ 3.290339] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.290358] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.290454] sda: [ 3.293226] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5 [ 3.294380] sda1 sda2 sda3 sda4 [ 3.315924] sdb1 [ 3.316128] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.317791] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.320560] usbcore: registered new interface driver hiddev [ 3.324410] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input3 [ 3.324464] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.1-3/input0 [ 3.324476] usbcore: registered new interface driver usbhid [ 3.324478] usbhid: USB HID core driver [ 3.353330] [drm] nouveau 0000:01:00.0: allocated 1600x900 fb: 0x40250000, bo ffff88012a9f3800 [ 3.354729] [drm] nouveau 0000:01:00.0: 0xC3F6: parsing output script 1 [ 3.354739] [drm] nouveau 0000:01:00.0: 0xC3F7: parsing output script 2 [ 3.354752] [drm] nouveau 0000:01:00.0: 0xC0E6: parsing clock script 0 [ 3.355604] Console: switching to colour frame buffer device 170x48 [ 3.356081] [drm] nouveau 0000:01:00.0: 0xBA22: parsing clock script 1 [ 3.357066] fb0: nouveaufb frame buffer device [ 3.357067] drm: registered panic notifier [ 3.357069] Slow work thread pool: Starting up [ 3.357143] Slow work thread pool: Ready [ 3.357147] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 3.373299] [drm] nouveau 0000:01:00.0: 0x11F1: parsing clock script 0 [ 4.415461] Btrfs loaded [ 4.418393] xor: automatically using best checksumming function: generic_sse [ 4.460832] generic_sse: 12370.800 MB/sec [ 4.460833] xor: using function: generic_sse (12370.800 MB/sec) [ 4.462488] device-mapper: dm-raid45: initialized v0.2594b [ 6.070135] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 6.109038] ISO 9660 Extensions: RRIP_1991A [ 6.283999] aufs 2-standalone.tree-35-rcN-20100705 [ 6.348065] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 43.429591] Adding 5237184k swap on /dev/sda3. Priority:-1 extents:1 across:5237184k [ 44.751918] udev[1430]: starting version 163 [ 48.633354] EDAC MC: Ver: 2.1.0 Sep 19 2010 [ 48.704056] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [??? 0x00000b00-0x00000b0f flags 0xffff88012906a098] [ 48.704059] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 48.799776] EDAC amd64_edac: Ver: 3.3.0 Sep 19 2010 [ 48.799828] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 48.799846] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 48.799847] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 48.799848] (Note that use of the override may cause unknown side effects.) [ 48.799856] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 50.776155] parport_pc 00:06: reported by Plug and Play ACPI [ 50.776207] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 51.112014] ppdev: user-space parallel port driver [ 52.265525] r8169 0000:02:00.0: eth0: link up [ 52.265533] r8169 0000:02:00.0: eth0: link up [ 53.027634] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 54.045458] lp0: using parport0 (interrupt-driven).