[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001eff0000 (usable) [ 0.000000] BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1eff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 010000000 mask FF8000000 write-back [ 0.000000] 2 base 018000000 mask FFC000000 write-back [ 0.000000] 3 base 01C000000 mask FFE000000 write-back [ 0.000000] 4 base 01E000000 mask FFF000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001eff0000 (usable) [ 0.000000] modified: 000000001eff0000 - 000000001effffc0 (ACPI data) [ 0.000000] modified: 000000001effffc0 - 000000001f000000 (ACPI NVS) [ 0.000000] modified: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001eff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001ec00000 page 2M [ 0.000000] 001ec00000 - 001eff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1eff0000 @ 7000-c000 [ 0.000000] RAMDISK: 1ea42000 - 1efbf098 [ 0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00) [ 0.000000] ACPI: RSDT 1effa9f0 00030 (v01 INSYDE RSDT_000 00000001 _CSI 00010101) [ 0.000000] ACPI: FACP 1efffb00 00074 (v01 COMPAL DCL51_00 00000100 _CSI 00010101) [ 0.000000] ACPI: DSDT 1effaa30 050C5 (v01 ACER TM290 00000006 MSFT 0100000E) [ 0.000000] ACPI: FACS 1effffc0 00040 [ 0.000000] ACPI: BOOT 1efffb90 00028 (v01 INSYDE BOOT_000 00000001 _CSI 00010101) [ 0.000000] ACPI: DBGP 1efffbc0 00034 (v01 INSYDE DBGP_000 00000001 _CSI 00010101) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 495MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1eff0000 [ 0.000000] low ram: 0 - 1eff0000 [ 0.000000] node 0 low ram: 00000000 - 1eff0000 [ 0.000000] node 0 bootmap 00008000 - 0000be00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001eff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [001ea42000 - 001efbf098] RAMDISK ==> [001ea42000 - 001efbf098] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac180] BRK ==> [00008a9000 - 00008ac180] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001eff0 [ 0.000000] HighMem 0x0001eff0 -> 0x0001eff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001eff0 [ 0.000000] On node 0 totalpages: 126859 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 960 pages used for memmap [ 0.000000] Normal zone: 121904 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 1f000000 (gap: 1f000000:e0b80000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c13e2000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125867 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr console-setup/layoutcode=fr console-setup/variantcode=oss [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2539200 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 486932k/507840k available (4565k kernel code, 20424k reserved, 2143k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xdf7f0000 - 0xff7fe000 ( 512 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdeff0000 ( 495 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1298.870 MHz processor. [ 0.001542] Console: colour VGA+ 80x25 [ 0.001548] console [tty0] enabled [ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 2597.74 BogoMIPS (lpj=5195480) [ 0.004040] Security Framework initialized [ 0.004076] AppArmor: AppArmor initialized [ 0.004087] Mount-cache hash table entries: 512 [ 0.004270] Initializing cgroup subsys ns [ 0.004277] Initializing cgroup subsys cpuacct [ 0.004284] Initializing cgroup subsys memory [ 0.004297] Initializing cgroup subsys freezer [ 0.004301] Initializing cgroup subsys net_cls [ 0.004323] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004328] CPU: L2 cache: 512K [ 0.004335] mce: CPU supports 5 MCE banks [ 0.004345] ------------[ cut here ]------------ [ 0.004359] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40() [ 0.004363] Hardware name: TravelMate 290 [ 0.004367] Modules linked in: [ 0.004373] Pid: 0, comm: swapper Not tainted 2.6.31-14-generic #48-Ubuntu [ 0.004377] Call Trace: [ 0.004389] [] warn_slowpath_common+0x6d/0xa0 [ 0.004396] [] ? native_apic_write_dummy+0x33/0x40 [ 0.004402] [] ? native_apic_write_dummy+0x33/0x40 [ 0.004409] [] warn_slowpath_null+0x15/0x20 [ 0.004415] [] native_apic_write_dummy+0x33/0x40 [ 0.004424] [] intel_init_thermal+0xac/0x1a0 [ 0.004431] [] mce_intel_feature_init+0xb/0x60 [ 0.004437] [] mce_cpu_features+0x10/0x40 [ 0.004446] [] mcheck_init+0x14a/0x188 [ 0.004452] [] ? init_hypervisor+0xb/0x2c [ 0.004457] [] identify_cpu+0x20e/0x21d [ 0.004467] [] identify_boot_cpu+0xd/0x23 [ 0.004472] [] check_bugs+0xb/0xe9 [ 0.004480] [] start_kernel+0x2dc/0x2ec [ 0.004486] [] ? unknown_bootoption+0x0/0x1ab [ 0.004493] [] i386_start_kernel+0x7c/0x83 [ 0.004505] ---[ end trace a7919e7f17c0a725 ]--- [ 0.004509] CPU0: Thermal monitoring enabled (TM1) [ 0.004522] Performance Counters: [ 0.004526] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004529] no hardware sampling interrupt available. [ 0.004532] p6 PMU driver. [ 0.004554] ... version: 0 [ 0.004557] ... bit width: 32 [ 0.004560] ... generic counters: 2 [ 0.004563] ... value mask: 00000000ffffffff [ 0.004566] ... max period: 000000007fffffff [ 0.004569] ... fixed-purpose counters: 0 [ 0.004572] ... counter mask: 0000000000000003 [ 0.004579] Checking 'hlt' instruction... OK. [ 0.021121] SMP alternatives: switching to UP code [ 0.028028] Freeing SMP alternatives: 19k freed [ 0.028046] ACPI: Core revision 20090521 [ 0.040441] ACPI: setting ELCR to 0200 (from 0c20) [ 0.044117] weird, boot CPU (#0) not listed by the BIOS. [ 0.044121] SMP motherboard not detected. [ 0.044125] Local APIC not detected. Using dummy APIC emulation. [ 0.044128] SMP disabled [ 0.044308] Brought up 1 CPUs [ 0.044314] Total of 1 processors activated (2597.74 BogoMIPS). [ 0.044333] CPU0 attaching NULL sched-domain. [ 0.044729] Booting paravirtualized kernel on bare hardware [ 0.045129] regulator: core version 0.5 [ 0.045157] Time: 13:46:14 Date: 11/11/09 [ 0.045243] NET: Registered protocol family 16 [ 0.045451] EISA bus registered [ 0.045478] ACPI: bus type pci registered [ 0.048175] PCI: PCI BIOS revision 2.10 entry at 0xe9824, last bus=1 [ 0.048179] PCI: Using configuration type 1 for base access [ 0.049796] bio: create slab at 0 [ 0.050687] ACPI: EC: Look up EC in DSDT [ 0.056141] ACPI: Interpreter enabled [ 0.056151] ACPI: (supports S0 S1 S3 S4 S5) [ 0.056181] ACPI: Using PIC for interrupt routing [ 0.056721] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.101412] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.101416] ACPI: EC: driver started in poll mode [ 0.101955] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.102754] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.102924] pci 0000:00:02.0: reg 10 32bit mmio: [0xb0000000-0xb7ffffff] [ 0.102933] pci 0000:00:02.0: reg 14 32bit mmio: [0xf0000000-0xf007ffff] [ 0.102940] pci 0000:00:02.0: reg 18 io port: [0xe000-0xe007] [ 0.102963] pci 0000:00:02.0: supports D1 [ 0.102985] pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x7ffffff] [ 0.102992] pci 0000:00:02.1: reg 14 32bit mmio: [0x000000-0x07ffff] [ 0.103017] pci 0000:00:02.1: supports D1 [ 0.103090] pci 0000:00:1d.0: reg 20 io port: [0x1200-0x121f] [ 0.103146] pci 0000:00:1d.1: reg 20 io port: [0x1600-0x161f] [ 0.103199] pci 0000:00:1d.2: reg 20 io port: [0x1700-0x171f] [ 0.103259] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0080000-0xf00803ff] [ 0.103316] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.103323] pci 0000:00:1d.7: PME# disabled [ 0.103411] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.103417] pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH4 GPIO [ 0.103442] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.103450] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.103459] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.103467] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.103475] pci 0000:00:1f.1: reg 20 io port: [0x1100-0x110f] [ 0.103484] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.103535] pci 0000:00:1f.3: reg 20 io port: [0x1400-0x141f] [ 0.103579] pci 0000:00:1f.5: reg 10 io port: [0xe100-0xe1ff] [ 0.103587] pci 0000:00:1f.5: reg 14 io port: [0xe200-0xe23f] [ 0.103595] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf0080400-0xf00805ff] [ 0.103604] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf0080600-0xf00806ff] [ 0.103633] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.103639] pci 0000:00:1f.5: PME# disabled [ 0.103671] pci 0000:00:1f.6: reg 10 io port: [0xe300-0xe3ff] [ 0.103679] pci 0000:00:1f.6: reg 14 io port: [0xe400-0xe47f] [ 0.103716] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.103721] pci 0000:00:1f.6: PME# disabled [ 0.103762] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0001800-0xe0001fff] [ 0.103771] pci 0000:01:00.0: reg 14 io port: [0xc100-0xc17f] [ 0.103810] pci 0000:01:00.0: supports D2 [ 0.103814] pci 0000:01:00.0: PME# supported from D2 D3hot D3cold [ 0.103819] pci 0000:01:00.0: PME# disabled [ 0.103851] pci 0000:01:01.0: reg 10 io port: [0xc000-0xc0ff] [ 0.103860] pci 0000:01:01.0: reg 14 32bit mmio: [0xe0001000-0xe00010ff] [ 0.103898] pci 0000:01:01.0: supports D1 D2 [ 0.103902] pci 0000:01:01.0: PME# supported from D1 D2 D3hot D3cold [ 0.103907] pci 0000:01:01.0: PME# disabled [ 0.103940] pci 0000:01:02.0: reg 10 32bit mmio: [0xe0000000-0xe0000fff] [ 0.103984] pci 0000:01:02.0: PME# supported from D0 D3hot D3cold [ 0.103990] pci 0000:01:02.0: PME# disabled [ 0.104035] pci 0000:01:04.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.104054] pci 0000:01:04.0: supports D1 D2 [ 0.104058] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.104064] pci 0000:01:04.0: PME# disabled [ 0.104099] pci 0000:00:1e.0: transparent bridge [ 0.104106] pci 0000:00:1e.0: bridge io port: [0xc000-0xdfff] [ 0.104112] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xefffffff] [ 0.104118] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xa0000000-0xafffffff] [ 0.104145] pci_bus 0000:00: on NUMA node 0 [ 0.104152] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.104384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.111632] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11 [ 0.111758] ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *5 [ 0.111880] ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled. [ 0.112016] ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled. [ 0.112150] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11 [ 0.112281] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *11 [ 0.112411] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *11 [ 0.112541] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 0.112838] SCSI subsystem initialized [ 0.112942] libata version 3.00 loaded. [ 0.113061] usbcore: registered new interface driver usbfs [ 0.113092] usbcore: registered new interface driver hub [ 0.113129] usbcore: registered new device driver usb [ 0.113327] ACPI: WMI: Mapper loaded [ 0.113330] PCI: Using ACPI for IRQ routing [ 0.113547] Bluetooth: Core ver 2.15 [ 0.113592] NET: Registered protocol family 31 [ 0.113595] Bluetooth: HCI device and connection manager initialized [ 0.113600] Bluetooth: HCI socket layer initialized [ 0.113603] NetLabel: Initializing [ 0.113606] NetLabel: domain hash size = 128 [ 0.113608] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.113631] NetLabel: unlabeled traffic allowed by default [ 0.116500] pnp: PnP ACPI init [ 0.116544] ACPI: bus type pnp registered [ 0.140133] pnp: PnP ACPI: found 10 devices [ 0.140138] ACPI: ACPI bus type pnp unregistered [ 0.140145] PnPBIOS: Disabled by ACPI PNP [ 0.140168] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.140173] system 00:01: ioport range 0x1300-0x133f has been reserved [ 0.140178] system 00:01: ioport range 0x200-0x20f has been reserved [ 0.140183] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.140188] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 0.174949] AppArmor: AppArmor Filesystem Enabled [ 0.175015] pci 0000:01:04.0: CardBus bridge, secondary bus 0000:02 [ 0.175019] pci 0000:01:04.0: IO window: 0x00c400-0x00c4ff [ 0.175026] pci 0000:01:04.0: IO window: 0x00c800-0x00c8ff [ 0.175032] pci 0000:01:04.0: PREFETCH window: 0xa0000000-0xa3ffffff [ 0.175039] pci 0000:01:04.0: MEM window: 0xe4000000-0xe7ffffff [ 0.175045] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.175050] pci 0000:00:1e.0: IO window: 0xc000-0xdfff [ 0.175058] pci 0000:00:1e.0: MEM window: 0xe0000000-0xefffffff [ 0.175064] pci 0000:00:1e.0: PREFETCH window: 0xa0000000-0xafffffff [ 0.175080] pci 0000:00:1e.0: setting latency timer to 64 [ 0.175317] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.175321] PCI: setting IRQ 10 as level-triggered [ 0.175329] pci 0000:01:04.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 0.175339] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.175343] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.175348] pci_bus 0000:01: resource 0 io: [0xc000-0xdfff] [ 0.175353] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xefffffff] [ 0.175357] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xafffffff] [ 0.175362] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.175366] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.175370] pci_bus 0000:02: resource 0 io: [0xc400-0xc4ff] [ 0.175375] pci_bus 0000:02: resource 1 io: [0xc800-0xc8ff] [ 0.175379] pci_bus 0000:02: resource 2 pref mem [0xa0000000-0xa3ffffff] [ 0.175384] pci_bus 0000:02: resource 3 mem: [0xe4000000-0xe7ffffff] [ 0.175447] NET: Registered protocol family 2 [ 0.175611] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.176100] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.176241] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.176382] TCP: Hash tables configured (established 16384 bind 16384) [ 0.176386] TCP reno registered [ 0.176511] NET: Registered protocol family 1 [ 0.176622] Trying to unpack rootfs image as initramfs... [ 0.676059] Switched to high resolution mode on CPU 0 [ 2.841787] Freeing initrd memory: 5620k freed [ 2.847465] Simple Boot Flag at 0x37 set to 0x1 [ 2.847595] cpufreq-nforce2: No nForce2 chipset. [ 2.847635] Scanning for low memory corruption every 60 seconds [ 2.847852] audit: initializing netlink socket (disabled) [ 2.847896] type=2000 audit(1257947175.844:1): initialized [ 2.862001] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.864537] VFS: Disk quotas dquot_6.5.2 [ 2.864643] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.865640] fuse init (API version 7.12) [ 2.865785] msgmni has been set to 962 [ 2.866121] alg: No test for stdrng (krng) [ 2.866140] io scheduler noop registered [ 2.866143] io scheduler anticipatory registered [ 2.866147] io scheduler deadline registered [ 2.866237] io scheduler cfq registered (default) [ 2.866262] pci 0000:00:02.0: Boot video device [ 2.866481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.866518] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.866776] ACPI: AC Adapter [ACAD] (on-line) [ 2.866902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.866909] ACPI: Power Button [PWRF] [ 2.866981] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 2.867032] ACPI: Lid Switch [LID] [ 2.867104] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 2.867109] ACPI: Power Button [PWRB] [ 2.867179] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 2.867183] ACPI: Sleep Button [SLPB] [ 2.867405] Marking TSC unstable due to TSC halts in idle [ 2.867431] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.867468] processor LNXCPU:00: registered as cooling_device0 [ 2.867474] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.888666] isapnp: Scanning for PnP cards... [ 2.982120] ACPI: Battery Slot [BAT1] (battery present) [ 3.243349] isapnp: No Plug & Play device found [ 3.245189] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.245306] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.246007] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 3.246014] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 3.246024] serial 0000:00:1f.6: PCI INT B disabled [ 3.247481] brd: module loaded [ 3.248231] loop: module loaded [ 3.248374] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 3.248557] ata_piix 0000:00:1f.1: version 2.13 [ 3.248571] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 3.248813] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 3.248819] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 3.248876] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 3.249012] scsi0 : ata_piix [ 3.249184] scsi1 : ata_piix [ 3.250629] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 3.250635] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 3.251980] Fixed MDIO Bus: probed [ 3.252369] PPP generic driver version 2.4.2 [ 3.252538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.252814] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 3.252821] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 3.252844] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.252850] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.252945] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.256857] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.256865] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.256879] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf0080000 [ 3.272040] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.272161] usb usb1: configuration #1 chosen from 1 choice [ 3.272208] hub 1-0:1.0: USB hub found [ 3.272221] hub 1-0:1.0: 6 ports detected [ 3.272320] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.272354] uhci_hcd: USB Universal Host Controller Interface driver [ 3.272425] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 3.272435] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.272440] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.272486] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.272510] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 [ 3.272645] usb usb2: configuration #1 chosen from 1 choice [ 3.272686] hub 2-0:1.0: USB hub found [ 3.272696] hub 2-0:1.0: 2 ports detected [ 3.272993] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 [ 3.272999] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 [ 3.273008] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.273012] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.273071] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.273096] uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001600 [ 3.273239] usb usb3: configuration #1 chosen from 1 choice [ 3.273288] hub 3-0:1.0: USB hub found [ 3.273298] hub 3-0:1.0: 2 ports detected [ 3.273363] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 3.273372] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.273376] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.273420] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.273444] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001700 [ 3.273569] usb usb4: configuration #1 chosen from 1 choice [ 3.273615] hub 4-0:1.0: USB hub found [ 3.273624] hub 4-0:1.0: 2 ports detected [ 3.273762] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 3.283851] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.291435] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.291444] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.291449] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.291453] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.291458] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.291554] mice: PS/2 mouse device common for all mice [ 3.291732] rtc_cmos 00:04: RTC can wake from S4 [ 3.291786] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 3.291805] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 3.292030] device-mapper: uevent: version 1.0.3 [ 3.292245] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 3.292322] device-mapper: multipath: version 1.1.0 loaded [ 3.292327] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.292538] EISA: Probing bus 0 at eisa.0 [ 3.292548] Cannot allocate resource for EISA slot 1 [ 3.292578] EISA: Detected 0 cards. [ 3.292708] cpuidle: using governor ladder [ 3.292800] cpuidle: using governor menu [ 3.293680] TCP cubic registered [ 3.293961] NET: Registered protocol family 10 [ 3.294725] lo: Disabled Privacy Extensions [ 3.295262] NET: Registered protocol family 17 [ 3.295293] Bluetooth: L2CAP ver 2.13 [ 3.295296] Bluetooth: L2CAP socket layer initialized [ 3.295300] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.295303] Bluetooth: SCO socket layer initialized [ 3.295357] Bluetooth: RFCOMM TTY layer initialized [ 3.295362] Bluetooth: RFCOMM socket layer initialized [ 3.295365] Bluetooth: RFCOMM ver 1.11 [ 3.295413] Using IPI No-Shortcut mode [ 3.295524] PM: Resume from disk failed. [ 3.295543] registered taskstats version 1 [ 3.295734] Magic number: 1:471:786 [ 3.295862] rtc_cmos 00:04: setting system clock to 2009-11-11 13:46:17 UTC (1257947177) [ 3.295867] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.295870] EDD information not available. [ 3.316219] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 3.416561] ata2.00: ATAPI: Slimtype COMBO LSC-24082K, JCK1, max UDMA/33 [ 3.418583] ata1.00: ATA-8: SAMSUNG HM121HC, LS100-10, max UDMA/100 [ 3.418588] ata1.00: 234441648 sectors, multi 16: LBA48 [ 3.432359] ata2.00: configured for UDMA/33 [ 3.434293] ata1.00: configured for UDMA/100 [ 3.434485] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM121HC LS10 PQ: 0 ANSI: 5 [ 3.434676] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.434738] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 3.434806] sd 0:0:0:0: [sda] Write Protect is off [ 3.434811] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.434846] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.435044] sda: [ 3.435831] scsi 1:0:0:0: CD-ROM Slimtype COMBO LSC-24082K JCK1 PQ: 0 ANSI: 5 [ 3.436773] sr0: scsi3-mmc drive: 20x/24x writer cd/rw xa/form2 cdda tray [ 3.436779] Uniform CD-ROM driver Revision: 3.20 [ 3.436923] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.437002] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.511002] sda1 sda2 sda3 sda4 [ 3.528505] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.528529] Freeing unused kernel memory: 540k freed [ 3.529013] Write protecting the kernel text: 4568k [ 3.529075] Write protecting the kernel read-only data: 1836k [ 3.693762] ramzswap: disk size set to 123296 kB [ 3.771169] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 3.771433] acpi device:06: registered as cooling_device1 [ 3.771589] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/input/input6 [ 3.771655] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [ 3.868170] Linux agpgart interface v0.103 [ 3.956517] Adding 123292k swap on /dev/ramzswap0. Priority:100 extents:1 across:123292k SSD [ 3.964262] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 3.964526] agpgart-intel 0000:00:00.0: detected 16252K stolen memory [ 3.966158] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xb0000000 [ 4.065471] [drm] Initialized drm 1.1.0 20060810 [ 4.100045] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 4.100053] i915 0000:00:02.0: setting latency timer to 64 [ 4.154345] i2c-adapter i2c-1: unable to read EDID block. [ 4.154353] i915 0000:00:02.0: LVDS-1: no EDID data [ 4.434428] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [ 4.434437] ohci1394 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 4.445873] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.517924] [drm] DAC-6: set mode 640x480 0 [ 4.520946] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0001800-e0001fff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.526468] 8139cp 0000:01:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.534316] 8139too Fast Ethernet driver 0.9.28 [ 4.534664] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 [ 4.534671] 8139too 0000:01:01.0: PCI INT A -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10 [ 4.535985] eth0: RealTek RTL8139 at 0xc000, 00:02:3f:1a:12:d9, IRQ 10 [ 4.987040] i2c-adapter i2c-1: unable to read EDID block. [ 4.987048] i915 0000:00:02.0: LVDS-1: no EDID data [ 5.010333] [drm] fb0: inteldrmfb frame buffer device [ 5.010349] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.103238] render error detected, EIR: 0x00000010 [ 5.103245] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking [ 5.103265] render error detected, EIR: 0x00000010 [ 5.114913] [drm] LVDS-8: set mode 1024x768 f [ 5.164988] Console: switching to colour frame buffer device 128x48 [ 5.394524] xor: automatically using best checksumming function: pIII_sse [ 5.412022] pIII_sse : 3385.000 MB/sec [ 5.412026] xor: using function: pIII_sse (3385.000 MB/sec) [ 5.419536] device-mapper: dm-raid45: initialized v0.2594b [ 5.796266] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f4744003135] [ 5.965145] EXT4-fs (sda4): barriers enabled [ 5.980758] kjournald2 starting: pid 430, dev sda4:8, commit interval 5 seconds [ 5.980781] EXT4-fs (sda4): delayed allocation enabled [ 5.980786] EXT4-fs: file extents enabled [ 5.984877] EXT4-fs: mballoc enabled [ 5.984905] EXT4-fs (sda4): mounted filesystem with ordered data mode [ 6.000156] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success) [ 6.000163] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost [ 6.000166] EXT4-fs: mballoc: 0 generated and it took 0 [ 6.000170] EXT4-fs: mballoc: 0 preallocated, 0 discarded [ 7.149108] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 7.202482] ISO 9660 Extensions: RRIP_1991A [ 7.433778] aufs 2-standalone.tree-30-20090727 [ 7.631049] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 78.335249] Adding 530136k swap on /dev/sda3. Priority:-1 extents:1 across:530136k [ 80.597181] udev: starting version 147 [ 80.736322] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 80.745330] ACPI: EC: GPE storm detected, transactions will use polling mode [ 83.829485] intel_rng: Firmware space is locked read-only. If you can't or [ 83.829488] intel_rng: don't want to disable this in firmware setup, and if [ 83.829490] intel_rng: you are certain that your system has a functional [ 83.829492] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 85.138670] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 85.566795] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7 [ 85.587847] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8 [ 85.922413] irda_init() [ 85.922434] NET: Registered protocol family 23 [ 86.439284] acer-wmi: Acer Laptop ACPI-WMI Extras [ 86.439317] acer-wmi: No or unsupported WMI interface, unable to load [ 87.026142] lib80211: common routines for IEEE802.11 drivers [ 87.026147] lib80211_crypt: registered algorithm 'NULL' [ 87.204325] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227 [ 87.204343] smsc_superio_flat(): fir: 0x230, sir: 0x3f8, dma: 03, irq: 4, mode: 0x0e [ 87.204351] smsc_ircc_present: can't get sir_base of 0x3f8 [ 87.681470] ip_tables: (C) 2000-2006 Netfilter Core Team [ 87.693296] parport_pc 00:09: reported by Plug and Play ACPI [ 87.693348] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 87.794101] yenta_cardbus 0000:01:04.0: CardBus bridge found [1025:003d] [ 87.794122] yenta_cardbus 0000:01:04.0: Using CSCINT to route CSC interrupts to PCI [ 87.794127] yenta_cardbus 0000:01:04.0: Routing CardBus interrupts to PCI [ 87.794133] yenta_cardbus 0000:01:04.0: TI: mfunc 0x00111c12, devctl 0x46 [ 87.888728] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 87.888733] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 88.024566] yenta_cardbus 0000:01:04.0: ISA IRQ mask 0x0030, PCI irq 10 [ 88.024573] yenta_cardbus 0000:01:04.0: Socket status: 30000006 [ 88.024580] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05 [ 88.024596] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff [ 88.024602] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: clean. [ 88.025201] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff [ 88.025206] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge Memory window: 0xa0000000 - 0xafffffff [ 88.536590] ppdev: user-space parallel port driver [ 88.780758] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 88.780763] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 88.781160] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 [ 88.781168] ipw2200 0000:01:02.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 [ 88.781315] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 88.781388] ipw2200 0000:01:02.0: firmware: requesting ipw2200-bss.fw [ 89.453733] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 89.619733] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x230-0x237 [ 89.621395] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 89.622096] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 89.622698] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 89.623540] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 91.567394] eth0: link down [ 91.572207] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 93.906479] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 93.906555] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 94.744041] intel8x0_measure_ac97_clock: measured 54359 usecs (2619 samples) [ 94.744047] intel8x0: clocking to 48000 [ 101.392482] [drm] DAC-6: set mode 640x480 0 [ 101.640023] eth1: no IPv6 routers present [ 101.986762] [drm] DAC-6: set mode 640x480 0 [ 102.483682] i2c-adapter i2c-1: unable to read EDID block. [ 102.483689] i915 0000:00:02.0: LVDS-1: no EDID data [ 102.590949] [drm] DAC-6: set mode 640x480 0 [ 103.118702] [drm] DAC-6: set mode 640x480 0 [ 103.549771] i2c-adapter i2c-1: unable to read EDID block. [ 103.549783] i915 0000:00:02.0: LVDS-1: no EDID data