Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31-105-imx51 (buildd@huito) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu7) ) #14-Ubuntu Tue Oct 13 21:13:53 UTC 2009 (Ubuntu 2.6.31-105.14-imx51)
CPU: ARMv7 Processor [412fc081] revision 1 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Freescale MX51 Babbage Board
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 122880
free_area_init_node: node 0, pgdat c06024dc, node_mem_map c0675000
  DMA zone: 128 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 16256 pages, LIFO batch:3
  Normal zone: 832 pages used for memmap
  Normal zone: 105664 pages, LIFO batch:31
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 121920
Kernel command line: console=ttymxc0,115200 console=tty0 file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
PID hash table entries: 2048 (order: 11, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 2457600 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 480MB = 480MB total
Memory: 468608KB available (5700K code, 680K data, 176K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:272
MXC IRQ initialized
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
CPU is i.MX51 Revision 2.0
MXC GPIO hardware
iomux_config_mux: Warning: iomux pin config changed, pin=-83197644,  prev=0x1 new=0x3
IRAM READY
Using SDMA I.API
MXC DMA API initialized
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
CSPI: mxc_spi-0 probed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
MXC I2C driver
MXC I2C driver
MXC HS I2C driver
PMIC Light driver loading...
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
mc13892 Rev 2.0 FinVer 0 detected
Initializing regulators for Babbage.
regulator: SW1: 600 <--> 1375 mV 
regulator: SW2: 900 <--> 1850 mV 
regulator: SW3: 1100 <--> 1850 mV 
regulator: SW4: 1100 <--> 1850 mV 
regulator: SWBST: 0 mV 
regulator: VIOHI: 0 mV 
regulator: VPLL: 1050 <--> 1800 mV 
regulator: VDIG: 1050 <--> 1800 mV 
regulator: VSD: 1800 <--> 3150 mV 
regulator: VUSB2: 2400 <--> 2775 mV 
regulator: VVIDEO: 2775 mV 
regulator: VAUDIO: 2300 <--> 3000 mV 
regulator: VCAM: 2500 <--> 3000 mV fast normal 
regulator: VGEN1: 1200 <--> 3150 mV 
regulator: VGEN2: 1200 <--> 3150 mV 
regulator: VGEN3: 1800 <--> 2900 mV 
regulator: VUSB: 0 mV 
regulator: GPO1: 0 mV 
regulator: GPO2: 0 mV 
regulator: GPO3: 0 mV 
regulator: GPO4: 0 mV 
PMIC ADC start probe
PMIC Light successfully loaded
Device spi1.0 probed
Switched to high resolution mode on CPU 0
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 9472K
LPMode driver module loaded
Static Power Management for Freescale i.MX51
PM driver module loaded
Bus freq driver module loaded
DVI monitor is primary
usb: Host 1 host (isp1504) registered
usb: DR host (utmi) registered
usb: DR gadget (utmi) registered
mxc_dvfs_core_probe
mxc_dvfs_core_probe: failed to get gp regulator
DVFS driver module loaded
i.MXC CPU frequency driver
mxc_cpufreq_driver_init: failed to get gp regulator
audit: initializing netlink socket (disabled)
type=2000 audit(3.170:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.12)
msgmni has been set to 934
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
fbcvt: 1024x768@60: CVT Name - .786M3
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
Console: switching to colour frame buffer device 128x48
mxc_sdc_fb mxc_sdc_fb.0: fb registered, using mode <NULL>
fbcvt: 1024x768@60: CVT Name - .786M3
mxc_sdc_fb mxc_sdc_fb.1: fb registered, using mode <NULL>
mxc_sdc_fb mxc_sdc_fb.2: fb registered, using mode <NULL>
regulator: get() with no identifier
regulator: get() with no identifier
regulator: get() with no identifier
mxci2c_wait_writefifo:wait error
Serial: MXC Internal UART driver
mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale MXC
console [ttymxc0] enabled
mxcintuart.1: ttymxc1 at MMIO 0x73fc0000 (irq = 32) is a Freescale MXC
mxcintuart.2: ttymxc2 at MMIO 0x7000c000 (irq = 33) is a Freescale MXC
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
FEC ENET Version 0.2
fec: PHY @ 0x0, ID 0x0007c0c4 -- LAN8700
eth0: ethernet 00:04:9f:00:cd:13
PPP generic driver version 2.4.2
MXC MTD nand Driver 2.5
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
MXC keypad loaded
clk: Unable to get requested clock: kpp_clk
input: mxckpd as /devices/virtual/input/input0
mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
i2c /dev entries driver
APM Battery Driver
MXC WatchDog Driver 2.0
clk: Unable to get requested clock: wdog_clk
MXC Watchdog # 0 Timer: initial timeout 60 sec
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
pmic_battery: probe of pmic_battery.1 failed with error -1
clk: Unable to get requested clock: scc_clk
SCC2: Driver Status is OK
Sahara HW Version is 0x27000410
ioctl pointer: c033ce94.  mmap pointer: c033d360
In fsh_shw_smalloc (km): partition_base:de91c000 partition_base_phys: 1fffc000
writing UMID and MAP to secure the partition
VPU initialized
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver. 
mmc0: SDHCI detect irq 128 irq 1 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver. 
mmc1: SDHCI detect irq 132 irq 2 INTERNAL DMA
Registered led device: pmic_ledsr
Registered led device: pmic_ledsg
Registered led device: pmic_ledsb
Advanced Linux Sound Architecture Driver Version 1.0.20.
sgtl5000-i2c 1-000a: SGTL5000 revision 17
DMA Sound Buffers Allocated:UseIram=1 buf->addr=1ffef000 buf->area=de858000 size=24576
DMA Sound Buffers Allocated:UseIram=1 buf->addr=ac1e0000 buf->area=fbe03000 size=24576
asoc: SGTL5000 <-> imx-ssi-3 mapping ok
mmc0: new high speed SDHC card at address 8fe4
mmcblk0: mmc0:8fe4 SD08G 7.60 GiB 
 mmcblk0: p1 p2
ALSA device list:
  #0: imx-3stack (SGTL5000)
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 14, io mem 0x73f80200
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
mmc1: new high speed SDHC card at address 8fe4
mmcblk1: mmc1:8fe4 SD08G 7.60 GiB 
 mmcblk1: p1 p2 p3
fsl-ehci fsl-ehci.1: irq 18, io mem 0x73f80000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ARC USBOTG Device Controller driver (1 August 2005)
udc: request mem region for fsl-usb2-udc failed 
fsl-usb2-udc: probe of fsl-usb2-udc failed with error -16
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
registered taskstats version 1
regulator_init_complete: incomplete constraints, leaving GPO4 on
regulator_init_complete: incomplete constraints, leaving GPO3 on
regulator_init_complete: incomplete constraints, leaving GPO2 on
regulator_init_complete: incomplete constraints, leaving GPO1 on
regulator_init_complete: incomplete constraints, leaving VUSB on
regulator_init_complete: incomplete constraints, leaving VGEN3 on
regulator_init_complete: incomplete constraints, leaving VGEN2 on
regulator_init_complete: incomplete constraints, leaving VGEN1 on
regulator_init_complete: incomplete constraints, leaving VCAM on
regulator_init_complete: incomplete constraints, leaving VAUDIO on
regulator_init_complete: incomplete constraints, leaving VUSB2 on
regulator_init_complete: incomplete constraints, leaving VSD on
regulator_init_complete: incomplete constraints, leaving VDIG on
regulator_init_complete: incomplete constraints, leaving VPLL on
regulator_init_complete: incomplete constraints, leaving VIOHI on
regulator_init_complete: incomplete constraints, leaving SWBST on
input: mxc_ts as /devices/virtual/input/input1
mxc input touchscreen loaded
mxc_rtc mxc_rtc.0: setting system clock to 2009-10-27 13:01:30 UTC (1256648490)
Freeing init memory: 176K
usb 1-1: new high speed USB device using fsl-ehci and address 2
ramzswap: disk size set to 119612 kB
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 7 ports detected
usb 1-1.2: new low speed USB device using fsl-ehci and address 3
usb 1-1.2: configuration #1 chosen from 1 choice
Adding 119608k swap on /dev/ramzswap0.  Priority:100 extents:1 across:119608k SSD
usbcore: registered new interface driver hiddev
input: USB keyboard as /devices/platform/fsl-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
generic-usb 0003:0DC6:3412.0001: input,hidraw0: USB HID v1.00 Keyboard [USB keyboard] on usb-fsl-ehci.0-1.2/input0
input: USB keyboard as /devices/platform/fsl-ehci.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input3
generic-usb 0003:0DC6:3412.0002: input,hidraw1: USB HID v1.00 Mouse [USB keyboard] on usb-fsl-ehci.0-1.2/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
xor: measuring software checksum speed
   arm4regs  :  1024.800 MB/sec
   8regs     :   948.800 MB/sec
   32regs    :  1024.800 MB/sec
xor: using function: 32regs (1024.800 MB/sec)
device-mapper: dm-raid45: initialized v0.2594b
aufs 2-standalone.tree-30-20090727
squashfs: version 4.0 (2009/01/31) Phillip Lougher
udev: starting version 147
eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
ip_tables: (C) 2000-2006 Netfilter Core Team