[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-79-generic (buildd@comet) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #115-Ubuntu SMP Thu Mar 12 14:21:14 UTC 2015 (Ubuntu 3.2.0-79.115-generic 3.2.67) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fec0000 (usable) [ 0.000000] BIOS-e820: 000000001fec0000 - 000000001fef8000 (ACPI data) [ 0.000000] BIOS-e820: 000000001fef8000 - 000000001ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] Legacy DMI 2.3 present. [ 0.000000] DMI: Gateway /WL810E , BIOS WL81020A.15A.0007.P06.0010031249 10/03/2000 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x1fec0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 01FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 512MB, type WB [ 0.000000] reg 1, base: 511MB, range: 1MB, type UC [ 0.000000] total RAM covered: 511M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 512MB, type WB [ 0.000000] reg 1, base: 511MB, range: 1MB, type UC [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fec0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fec0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fec0000 @ 1bf8000-1c00000 [ 0.000000] RAMDISK: 1e575000 - 1f385000 [ 0.000000] ACPI: RSDP 000ff980 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 1fef0000 00028 (v01 GATEWA N9CPP041 20001003 MSFT 00000097) [ 0.000000] ACPI: FACP 1fef1000 00074 (v01 GATEWA N9CPP041 20001003 MSFT 00000097) [ 0.000000] ACPI: DSDT 1fee0000 028BC (v01 GATEWA N9CPP041 00000012 MSFT 0100000B) [ 0.000000] ACPI: FACS 1fef8000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 510MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fec0000 [ 0.000000] low ram: 0 - 1fec0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fec0 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001fec0 [ 0.000000] On node 0 totalpages: 130639 [ 0.000000] free_area_init_node: node 0, pgdat c1831fc0, node_mem_map dfabf200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125666 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 1ff00000 (gap: 1ff00000:dfc80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @dfaae000 s31680 r0 d21568 u53248 [ 0.000000] pcpu-alloc: s31680 r0 d21568 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129617 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-79-generic root=/dev/mapper/stephen-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2091776 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 491460k/523008k available (5654k kernel code, 31096k reserved, 2787k data, 720k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe06c0000 - 0xff7fe000 ( 497 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfec0000 ( 510 MB) [ 0.000000] .init : 0xc183f000 - 0xc18f3000 ( 720 kB) [ 0.000000] .data : 0xc1585804 - 0xc183e700 (2787 kB) [ 0.000000] .text : 0xc1000000 - 0xc1585804 (5654 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=df408000 soft=df40a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 730.996 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1461.99 BogoMIPS (lpj=2923984) [ 0.004032] pid_max: default: 32768 minimum: 301 [ 0.004151] Security Framework initialized [ 0.004276] AppArmor: AppArmor initialized [ 0.004285] Yama: becoming mindful. [ 0.004547] Mount-cache hash table entries: 512 [ 0.005174] Initializing cgroup subsys cpuacct [ 0.005210] Initializing cgroup subsys memory [ 0.005249] Initializing cgroup subsys devices [ 0.005260] Initializing cgroup subsys freezer [ 0.005270] Initializing cgroup subsys blkio [ 0.005300] Initializing cgroup subsys perf_event [ 0.005438] mce: CPU supports 5 MCE banks [ 0.008273] SMP alternatives: switching to UP code [ 0.027111] Freeing SMP alternatives: 24k freed [ 0.027234] ACPI: Core revision 20110623 [ 0.033114] ACPI: setting ELCR to 0200 (from 0e08) [ 0.033538] ftrace: allocating 25554 entries in 51 pages [ 0.044387] weird, boot CPU (#0) not listed by the BIOS. [ 0.044408] SMP motherboard not detected. [ 0.044417] Local APIC not detected. Using dummy APIC emulation. [ 0.044424] SMP disabled [ 0.044432] Performance Events: [ 0.044441] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.044449] no hardware sampling interrupt available. [ 0.044461] p6 PMU driver. [ 0.044480] ... version: 0 [ 0.044486] ... bit width: 32 [ 0.044493] ... generic registers: 2 [ 0.044501] ... value mask: 00000000ffffffff [ 0.044508] ... max period: 000000007fffffff [ 0.044515] ... fixed-purpose events: 0 [ 0.044522] ... event mask: 0000000000000003 [ 0.045961] NMI watchdog disabled (cpu0): not supported (no LAPIC?) [ 0.046355] Brought up 1 CPUs [ 0.046371] Total of 1 processors activated (1461.99 BogoMIPS). [ 0.047618] devtmpfs: initialized [ 0.048244] EVM: security.selinux [ 0.048254] EVM: security.SMACK64 [ 0.048260] EVM: security.capability [ 0.048570] PM: Registering ACPI NVS region at 1fef8000 (32768 bytes) [ 0.054822] print_constraints: dummy: [ 0.054914] RTC time: 14:19:18, date: 04/07/15 [ 0.055129] NET: Registered protocol family 16 [ 0.055716] EISA bus registered [ 0.055905] ACPI: bus type pci registered [ 0.057280] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=1 [ 0.057297] PCI: Using configuration type 1 for base access [ 0.063315] bio: create slab at 0 [ 0.064150] ACPI: Added _OSI(Module Device) [ 0.064166] ACPI: Added _OSI(Processor Device) [ 0.064176] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064187] ACPI: Added _OSI(Processor Aggregator Device) [ 0.066000] ACPI: EC: Look up EC in DSDT [ 0.076774] ACPI: Interpreter enabled [ 0.076847] ACPI: (supports S0 S1 S4 S5) [ 0.076932] ACPI: Using PIC for interrupt routing [ 0.084489] ACPI: Power Resource [URP1] (off) [ 0.084735] ACPI: Power Resource [URP2] (off) [ 0.084996] ACPI: Power Resource [FDDP] (off) [ 0.085244] ACPI: Power Resource [LPTP] (off) [ 0.091373] ACPI: No dock devices found. [ 0.091392] HEST: Table not found. [ 0.091418] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.092508] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.094261] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.094279] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.094291] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.094302] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000cffff] (ignored) [ 0.094314] pci_root PNP0A03:00: host bridge window [mem 0x1ff00000-0xffefffff] (ignored) [ 0.094360] pci 0000:00:00.0: [8086:7124] type 0 class 0x000600 [ 0.094485] pci 0000:00:01.0: [8086:7125] type 0 class 0x000300 [ 0.094518] pci 0000:00:01.0: reg 10: [mem 0xf8000000-0xfbffffff pref] [ 0.094539] pci 0000:00:01.0: reg 14: [mem 0xffa80000-0xffafffff] [ 0.094714] pci 0000:00:1e.0: [8086:2418] type 1 class 0x000604 [ 0.094806] pci 0000:00:1f.0: [8086:2410] type 0 class 0x000601 [ 0.094958] pci 0000:00:1f.1: [8086:2411] type 0 class 0x000101 [ 0.095036] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.095114] pci 0000:00:1f.2: [8086:2412] type 0 class 0x000c03 [ 0.095194] pci 0000:00:1f.2: reg 20: [io 0xef80-0xef9f] [ 0.095288] pci 0000:00:1f.3: [8086:2413] type 0 class 0x000c05 [ 0.095368] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefaf] [ 0.095446] pci 0000:00:1f.5: [8086:2415] type 0 class 0x000401 [ 0.095476] pci 0000:00:1f.5: reg 10: [io 0xe800-0xe8ff] [ 0.095499] pci 0000:00:1f.5: reg 14: [io 0xef00-0xef3f] [ 0.095666] pci 0000:01:0a.0: [17fe:2120] type 0 class 0x000200 [ 0.095701] pci 0000:01:0a.0: reg 10: [mem 0xff8fe800-0xff8fefff] [ 0.095858] pci 0000:01:0b.0: [100b:0020] type 0 class 0x000200 [ 0.095893] pci 0000:01:0b.0: reg 10: [io 0xd800-0xd8ff] [ 0.095915] pci 0000:01:0b.0: reg 14: [mem 0xff8ff000-0xff8fffff] [ 0.096068] pci 0000:01:0b.0: reg 30: [mem 0xff8e0000-0xff8effff pref] [ 0.096123] pci 0000:01:0b.0: supports D1 D2 [ 0.096133] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096150] pci 0000:01:0b.0: PME# disabled [ 0.096208] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.096224] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.096239] pci 0000:00:1e.0: bridge window [mem 0xff800000-0xff8fffff] [ 0.096253] pci 0000:00:1e.0: bridge window [mem 0xf6a00000-0xf6afffff pref] [ 0.096266] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.096277] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.096304] pci_bus 0000:00: on NUMA node 0 [ 0.096329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.096603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.097211] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.101446] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.101687] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.101910] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.102134] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.102775] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.102808] vgaarb: loaded [ 0.102815] vgaarb: bridge control possible 0000:00:01.0 [ 0.103368] i2c-core: driver [aat2870] using legacy suspend method [ 0.103381] i2c-core: driver [aat2870] using legacy resume method [ 0.103895] SCSI subsystem initialized [ 0.104363] libata version 3.00 loaded. [ 0.104685] usbcore: registered new interface driver usbfs [ 0.104746] usbcore: registered new interface driver hub [ 0.105009] usbcore: registered new device driver usb [ 0.105688] PCI: Using ACPI for IRQ routing [ 0.105714] PCI: pci_cache_line_size set to 32 bytes [ 0.105846] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.105859] reserve RAM buffer: 000000001fec0000 - 000000001fffffff [ 0.106431] NetLabel: Initializing [ 0.106446] NetLabel: domain hash size = 128 [ 0.106453] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.106509] NetLabel: unlabeled traffic allowed by default [ 0.106994] Switching to clocksource pit [ 0.145275] AppArmor: AppArmor Filesystem Enabled [ 0.145472] pnp: PnP ACPI init [ 0.145569] ACPI: bus type pnp registered [ 0.146621] pnp 00:00: [bus 00-ff] [ 0.146640] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.146651] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.146661] pnp 00:00: [io 0x0d00-0xffff window] [ 0.146672] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.146683] pnp 00:00: [mem 0x000c0000-0x000cffff window] [ 0.146693] pnp 00:00: [mem 0x1ff00000-0xffefffff window] [ 0.146973] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.147214] pnp 00:01: [dma 4] [ 0.147226] pnp 00:01: [io 0x0000-0x000f] [ 0.147235] pnp 00:01: [io 0x0081-0x0083] [ 0.147244] pnp 00:01: [io 0x0087] [ 0.147253] pnp 00:01: [io 0x0089-0x008b] [ 0.147262] pnp 00:01: [io 0x008f] [ 0.147271] pnp 00:01: [io 0x00c0-0x00df] [ 0.147452] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.147517] pnp 00:02: [io 0x0070-0x0071] [ 0.147537] pnp 00:02: [irq 8] [ 0.147668] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.147720] pnp 00:03: [io 0x0061] [ 0.147844] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.147898] pnp 00:04: [io 0x00f0-0x00ff] [ 0.147912] pnp 00:04: [irq 13] [ 0.148058] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.148240] pnp 00:05: [irq 12] [ 0.148442] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.148581] pnp 00:06: [io 0x0060] [ 0.148594] pnp 00:06: [io 0x0064] [ 0.148607] pnp 00:06: [irq 1] [ 0.148810] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.149334] pnp 00:07: [io 0x03f0-0x03f1] [ 0.149347] pnp 00:07: [io 0x03f2-0x03f3] [ 0.149357] pnp 00:07: [io 0x03f4-0x03f5] [ 0.149366] pnp 00:07: [io 0x03f7] [ 0.149381] pnp 00:07: [irq 6] [ 0.149390] pnp 00:07: [dma 2] [ 0.149688] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.150467] pnp 00:08: [io 0x03f8-0x03ff] [ 0.150486] pnp 00:08: [irq 4] [ 0.150861] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.152149] pnp 00:09: [io 0x0378-0x037f] [ 0.152163] pnp 00:09: [io 0x0778-0x077f] [ 0.152177] pnp 00:09: [irq 7] [ 0.152187] pnp 00:09: [dma 3] [ 0.152655] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.153445] pnp 00:0a: [io 0x0201] [ 0.153750] pnp 00:0a: Plug and Play ACPI device, IDs PNPb02f (active) [ 0.154542] pnp 00:0b: [io 0x0330-0x0331] [ 0.154561] pnp 00:0b: [irq 5] [ 0.154911] pnp 00:0b: Plug and Play ACPI device, IDs PNPb006 (active) [ 0.155071] pnp 00:0c: [mem 0xfff00000-0xffffffff] [ 0.155083] pnp 00:0c: [mem 0xffb00000-0xffbfffff] [ 0.155273] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active) [ 0.156265] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.156279] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.156289] pnp 00:0d: [mem 0x00100000-0x1fefffff] [ 0.156299] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.156310] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.156658] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.156679] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.156692] system 00:0d: [mem 0x00100000-0x1fefffff] could not be reserved [ 0.156709] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.156744] pnp: PnP ACPI: found 14 devices [ 0.156752] ACPI: ACPI bus type pnp unregistered [ 0.156769] PnPBIOS: Disabled by ACPI PNP [ 0.204392] Switching to clocksource acpi_pm [ 0.204513] PCI: max bus depth: 1 pci_try_num: 2 [ 0.204569] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 0.204585] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.204604] pci 0000:00:1e.0: bridge window [mem 0xff800000-0xff8fffff] [ 0.204619] pci 0000:00:1e.0: bridge window [mem 0xf6a00000-0xf6afffff pref] [ 0.204668] pci 0000:00:1e.0: setting latency timer to 64 [ 0.204685] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.204696] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.204707] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.204718] pci_bus 0000:01: resource 1 [mem 0xff800000-0xff8fffff] [ 0.204729] pci_bus 0000:01: resource 2 [mem 0xf6a00000-0xf6afffff pref] [ 0.204740] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.204750] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff] [ 0.205084] NET: Registered protocol family 2 [ 0.214635] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.215650] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.216442] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.217271] TCP: Hash tables configured (established 16384 bind 16384) [ 0.217287] TCP reno registered [ 0.217316] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.217388] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.217955] NET: Registered protocol family 1 [ 0.218070] pci 0000:00:01.0: Boot video device [ 0.218622] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 0.218639] PCI: setting IRQ 9 as level-triggered [ 0.218658] pci 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 0.218703] pci 0000:00:1f.2: PCI INT D disabled [ 0.218748] PCI: CLS 0 bytes, default 32 [ 0.220710] audit: initializing netlink socket (disabled) [ 0.220773] type=2000 audit(1428416357.216:1): initialized [ 0.306975] Trying to unpack rootfs image as initramfs... [ 0.402606] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.420804] VFS: Disk quotas dquot_6.5.2 [ 0.421109] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.424209] fuse init (API version 7.17) [ 0.424863] msgmni has been set to 959 [ 0.444935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.445315] io scheduler noop registered [ 0.445328] io scheduler deadline registered [ 0.445403] io scheduler cfq registered (default) [ 0.446103] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.446201] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.446638] efifb: probing for efifb [ 0.446658] efifb: cannot reserve video memory at 0xa0000 [ 0.446687] efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 56k, total 64k [ 0.446698] efifb: mode is 640x350x1, linelength=80, pages=1 [ 0.446706] efifb: scrolling: redraw [ 0.446718] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.447406] Console: switching to colour frame buffer device 80x43 [ 0.447503] fb0: EFI VGA frame buffer device [ 0.447970] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.448003] ACPI: Power Button [PWRF] [ 0.457688] ERST: Table is not found! [ 0.457707] GHES: HEST is not enabled! [ 0.458588] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.479293] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.479486] isapnp: Scanning for PnP cards... [ 0.628220] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.650599] Linux agpgart interface v0.103 [ 0.650855] agpgart-intel 0000:00:00.0: Intel i810 Chipset [ 0.650918] agpgart-intel 0000:00:00.0: detected gtt size: 65536K total, 65536K mappable [ 0.651630] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 0.666663] brd: module loaded [ 0.722326] loop: module loaded [ 0.723094] ata_piix 0000:00:1f.1: version 2.13 [ 0.723352] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.728457] scsi0 : ata_piix [ 0.729185] scsi1 : ata_piix [ 0.737488] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.737511] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.739663] Fixed MDIO Bus: probed [ 0.739774] tun: Universal TUN/TAP device driver, 1.6 [ 0.739785] tun: (C) 1999-2004 Max Krasnyansky [ 0.740840] PPP generic driver version 2.4.2 [ 0.744993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.745169] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.745243] uhci_hcd: USB Universal Host Controller Interface driver [ 0.745414] uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 0.745465] uhci_hcd 0000:00:1f.2: setting latency timer to 64 [ 0.745479] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 0.745868] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 0.745960] uhci_hcd 0000:00:1f.2: irq 9, io base 0x0000ef80 [ 0.746890] hub 1-0:1.0: USB hub found [ 0.746921] hub 1-0:1.0: 2 ports detected [ 0.747476] usbcore: registered new interface driver libusual [ 0.747732] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.757596] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.757680] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.758755] mousedev: PS/2 mouse device common for all mice [ 0.759913] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.759982] rtc0: alarms up to one month, 114 bytes nvram [ 0.760598] device-mapper: uevent: version 1.0.3 [ 0.761119] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.761277] EISA: Probing bus 0 at eisa.0 [ 0.761355] EISA: Detected 0 cards. [ 0.761403] cpufreq-nforce2: No nForce2 chipset. [ 0.761415] cpuidle: using governor ladder [ 0.761423] cpuidle: using governor menu [ 0.761432] EFI Variables Facility v0.08 2004-May-17 [ 0.762546] TCP cubic registered [ 0.763245] NET: Registered protocol family 10 [ 0.770909] NET: Registered protocol family 17 [ 0.770963] Registering the dns_resolver key type [ 0.771104] Using IPI No-Shortcut mode [ 0.776806] PM: Hibernation image not present or could not be loaded. [ 0.776881] registered taskstats version 1 [ 1.052908] ata1.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100 [ 1.052931] ata1.00: 156301488 sectors, multi 16: LBA [ 1.100702] isapnp: No Plug & Play device found [ 1.100825] usb 1-1: new low-speed USB device number 2 using uhci_hcd [ 1.108302] ata2.00: ATAPI: SONY CD-RW CRX217E, 1DS1, max UDMA/33 [ 1.117538] ata1.00: configured for UDMA/66 [ 1.118406] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5 [ 1.119993] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.120403] ata2.00: configured for UDMA/33 [ 1.121689] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.122467] sd 0:0:0:0: [sda] Write Protect is off [ 1.122487] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.122672] scsi 1:0:0:0: CD-ROM SONY CD-RW CRX217E 1DS1 PQ: 0 ANSI: 5 [ 1.123531] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.125634] sr0: scsi3-mmc drive: 255x/48x writer cd/rw xa/form2 cdda tray [ 1.125656] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.126353] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.127248] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.167922] sda: sda1 sda2 < sda5 > [ 1.170430] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.304251] Refined TSC clocksource calibration: 730.961 MHz. [ 1.304288] Switching to clocksource tsc [ 1.388312] usb 1-2: new low-speed USB device number 3 using uhci_hcd [ 2.498942] Freeing initrd memory: 14400k freed [ 2.637187] Magic number: 11:268:333 [ 2.637356] tty tty54: hash matches [ 2.637539] rtc_cmos 00:02: setting system clock to 2015-04-07 14:19:20 UTC (1428416360) [ 2.637642] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.637651] EDD information not available. [ 2.638552] Freeing unused kernel memory: 720k freed [ 2.643473] Write protecting the kernel text: 5656k [ 2.643635] Write protecting the kernel read-only data: 2340k [ 2.781819] udevd[85]: starting version 175 [ 3.376354] usb 1-1: USB disconnect, device number 2 [ 3.799272] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 3.799284] originally by Donald Becker [ 3.799289] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 3.799444] natsemi 0000:01:0b.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 3.874469] natsemi eth0: NatSemi DP8381[56] at 0xff8ff000 (0000:01:0b.0), 00:40:f4:3c:57:17, IRQ 9, port TP. [ 3.899941] Floppy drive(s): fd0 is 1.44M [ 3.973047] FDC 0 is a post-1991 82077 [ 4.300826] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2:1.0/input/input1 [ 4.305046] generic-usb 0003:1A2C:0021.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1f.2-2/input0 [ 4.856223] usb 1-1: new low-speed USB device number 4 using uhci_hcd [ 5.711169] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.325913] generic-usb 0003:1A2C:0021.0002: usb_submit_urb(ctrl) failed [ 14.325963] generic-usb 0003:1A2C:0021.0002: timeout initializing reports [ 14.326587] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2:1.1/input/input2 [ 14.327952] generic-usb 0003:1A2C:0021.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1f.2-2/input1 [ 14.344841] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/input/input3 [ 14.346471] generic-usb 0003:1C4F:0003.0003: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1f.2-1/input0 [ 14.346786] usbcore: registered new interface driver usbhid [ 14.346801] usbhid: USB HID core driver [ 25.999806] Adding 524284k swap on /dev/mapper/stephen-swap_1. Priority:-1 extents:1 across:524284k [ 26.134551] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.212966] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 26.217726] udevd[358]: starting version 175 [ 26.611052] lp: driver loaded but no devices found [ 28.078133] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 28.095572] intel_rng: Firmware space is locked read-only. If you can't or [ 28.095585] intel_rng: don't want to disable this in firmware setup, and if [ 28.095590] intel_rng: you are certain that your system has a functional [ 28.095595] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 28.659834] ppdev: user-space parallel port driver [ 28.751838] Bluetooth: Core ver 2.16 [ 28.752423] NET: Registered protocol family 31 [ 28.752442] Bluetooth: HCI device and connection manager initialized [ 28.752457] Bluetooth: HCI socket layer initialized [ 28.752466] Bluetooth: L2CAP socket layer initialized [ 28.752514] Bluetooth: SCO socket layer initialized [ 28.755958] parport_pc 00:09: reported by Plug and Play ACPI [ 28.756179] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 28.845482] lp0: using parport0 (interrupt-driven). [ 28.853958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.853978] Bluetooth: BNEP filters: protocol multicast [ 28.882506] Bluetooth: RFCOMM TTY layer initialized [ 28.882535] Bluetooth: RFCOMM socket layer initialized [ 28.882544] Bluetooth: RFCOMM ver 1.11 [ 29.218214] type=1400 audit(1428416387.076:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=552 comm="apparmor_parser" [ 29.252571] type=1400 audit(1428416387.112:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=552 comm="apparmor_parser" [ 29.699989] udevd[403]: renamed network interface eth0 to eth1 [ 29.965011] type=1400 audit(1428416387.824:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=580 comm="apparmor_parser" [ 29.967359] type=1400 audit(1428416387.824:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=580 comm="apparmor_parser" [ 29.980931] type=1400 audit(1428416387.840:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=580 comm="apparmor_parser" [ 30.828889] gameport gameport0: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 764kHz [ 34.075750] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 34.075771] PCI: setting IRQ 10 as level-triggered [ 34.075792] snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 34.075864] snd_intel8x0 0000:00:1f.5: setting latency timer to 64 [ 34.859248] init: failsafe main process (769) killed by TERM signal [ 35.227999] intel8x0_measure_ac97_clock: measured 68559 usecs (3294 samples) [ 35.228192] intel8x0: clocking to 48000 [ 36.243212] type=1400 audit(1428416394.100:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=872 comm="apparmor_parser" [ 36.252615] type=1400 audit(1428416394.112:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=872 comm="apparmor_parser" [ 36.334563] type=1400 audit(1428416394.192:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=875 comm="apparmor_parser" [ 36.353121] type=1400 audit(1428416394.212:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=875 comm="apparmor_parser" [ 36.354496] type=1400 audit(1428416394.212:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=875 comm="apparmor_parser" [ 36.482205] eth1: DSPCFG accepted after 0 usec. [ 36.482232] eth1: link up. [ 36.482297] eth1: Setting full-duplex based on negotiated link capability. [ 36.767926] type=1400 audit(1428416394.624:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=877 comm="apparmor_parser" [ 36.901578] type=1400 audit(1428416394.760:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=877 comm="apparmor_parser" [ 36.939337] type=1400 audit(1428416394.796:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=877 comm="apparmor_parser" [ 37.001340] type=1400 audit(1428416394.860:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=877 comm="apparmor_parser" [ 37.053657] type=1400 audit(1428416394.912:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=877 comm="apparmor_parser" [ 41.971707] [drm] Initialized drm 1.1.0 20060810 [ 45.563859] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 45.563880] PCI: setting IRQ 11 as level-triggered [ 45.563902] pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 45.563924] pci 0000:00:01.0: setting latency timer to 64 [ 45.568215] [drm] Initialized i810 1.4.0 20030605 for 0000:00:01.0 on minor 0 [ 45.576898] mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary [ 45.768512] [drm] Using v1.4 init. [ 45.785298] mtrr: base(0xf8000000) is not aligned on a size(0x3000000) boundary [ 48.888051] [drm:drm_reclaim_locked_buffers] *ERROR* reclaim_buffers_locked() deadlock. Please rework this [ 48.888065] driver to use reclaim_buffers_idlelocked() instead. [ 48.888070] I will go on reclaiming the buffers anyway. [ 51.888045] [drm:drm_reclaim_locked_buffers] *ERROR* reclaim_buffers_locked() deadlock. Please rework this [ 51.888059] driver to use reclaim_buffers_idlelocked() instead. [ 51.888064] I will go on reclaiming the buffers anyway. [ 1658.778530] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1658.778552] ata1.00: BMDMA stat 0x25 [ 1658.778568] ata1.00: failed command: READ DMA [ 1658.778594] ata1.00: cmd c8/00:38:38:f4:cd/00:00:00:00:00/e2 tag 0 dma 28672 in [ 1658.778599] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1658.778612] ata1.00: status: { DRDY ERR } [ 1658.792484] ata1.00: configured for UDMA/66 [ 1658.792557] ata1: EH complete [ 1660.707691] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1660.707713] ata1.00: BMDMA stat 0x25 [ 1660.707729] ata1.00: failed command: READ DMA [ 1660.707755] ata1.00: cmd c8/00:38:38:f4:cd/00:00:00:00:00/e2 tag 0 dma 28672 in [ 1660.707760] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1660.707773] ata1.00: status: { DRDY ERR } [ 1660.720419] ata1.00: configured for UDMA/66 [ 1660.720488] ata1: EH complete [ 1662.558431] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1662.558454] ata1.00: BMDMA stat 0x25 [ 1662.558469] ata1.00: failed command: READ DMA [ 1662.558496] ata1.00: cmd c8/00:38:38:f4:cd/00:00:00:00:00/e2 tag 0 dma 28672 in [ 1662.558501] res 51/40:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x9 (media error) [ 1662.558514] ata1.00: status: { DRDY ERR } [ 1662.558524] ata1.00: error: { UNC } [ 1662.572420] ata1.00: configured for UDMA/66 [ 1662.572487] ata1: EH complete [ 1664.405429] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1664.405451] ata1.00: BMDMA stat 0x25 [ 1664.405466] ata1.00: failed command: READ DMA [ 1664.405493] ata1.00: cmd c8/00:38:38:f4:cd/00:00:00:00:00/e2 tag 0 dma 28672 in [ 1664.405498] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1664.405512] ata1.00: status: { DRDY ERR } [ 1664.420435] ata1.00: configured for UDMA/66 [ 1664.420501] ata1: EH complete [ 1666.259929] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1666.259951] ata1.00: BMDMA stat 0x25 [ 1666.259967] ata1.00: failed command: READ DMA [ 1666.259993] ata1.00: cmd c8/00:38:38:f4:cd/00:00:00:00:00/e2 tag 0 dma 28672 in [ 1666.259998] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1666.260069] ata1.00: status: { DRDY ERR } [ 1666.276421] ata1.00: configured for UDMA/66 [ 1666.276488] ata1: EH complete [ 1668.106899] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1668.106921] ata1.00: BMDMA stat 0x25 [ 1668.106937] ata1.00: failed command: READ DMA [ 1668.106962] ata1.00: cmd c8/00:38:38:f4:cd/00:00:00:00:00/e2 tag 0 dma 28672 in [ 1668.106968] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1668.106981] ata1.00: status: { DRDY ERR } [ 1668.120421] ata1.00: configured for UDMA/66 [ 1668.120506] sd 0:0:0:0: [sda] Unhandled sense code [ 1668.120516] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1668.120531] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 1668.120548] Descriptor sense data with sense descriptors (in hex): [ 1668.120557] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1668.120590] 02 cd f4 56 [ 1668.120605] sd 0:0:0:0: [sda] Add. Sense: Address mark not found for data field [ 1668.120629] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 02 cd f4 38 00 00 38 00 [ 1668.120663] end_request: I/O error, dev sda, sector 47051862 [ 1668.120779] ata1: EH complete [ 1670.198318] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1670.198340] ata1.00: BMDMA stat 0x25 [ 1670.198356] ata1.00: failed command: READ DMA [ 1670.198382] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1670.198388] res 51/40:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x9 (media error) [ 1670.198401] ata1.00: status: { DRDY ERR } [ 1670.198411] ata1.00: error: { UNC } [ 1670.212431] ata1.00: configured for UDMA/66 [ 1670.212503] ata1: EH complete [ 1672.127509] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1672.127530] ata1.00: BMDMA stat 0x25 [ 1672.127546] ata1.00: failed command: READ DMA [ 1672.127573] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1672.127578] res 51/40:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x9 (media error) [ 1672.127591] ata1.00: status: { DRDY ERR } [ 1672.127601] ata1.00: error: { UNC } [ 1672.140425] ata1.00: configured for UDMA/66 [ 1672.140496] ata1: EH complete [ 1673.974525] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1673.974546] ata1.00: BMDMA stat 0x25 [ 1673.974561] ata1.00: failed command: READ DMA [ 1673.974587] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1673.974593] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1673.974606] ata1.00: status: { DRDY ERR } [ 1673.988429] ata1.00: configured for UDMA/66 [ 1673.988502] ata1: EH complete [ 1675.833591] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1675.833613] ata1.00: BMDMA stat 0x25 [ 1675.833628] ata1.00: failed command: READ DMA [ 1675.833655] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1675.833660] res 51/40:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x9 (media error) [ 1675.833674] ata1.00: status: { DRDY ERR } [ 1675.833683] ata1.00: error: { UNC } [ 1675.848428] ata1.00: configured for UDMA/66 [ 1675.848501] ata1: EH complete [ 1677.696330] ata1.00: limiting speed to UDMA/44:PIO4 [ 1677.696356] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1677.696369] ata1.00: BMDMA stat 0x25 [ 1677.696384] ata1.00: failed command: READ DMA [ 1677.696410] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1677.696415] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1677.696428] ata1.00: status: { DRDY ERR } [ 1677.696510] ata1: soft resetting link [ 1677.884393] ata1.00: configured for UDMA/44 [ 1677.884461] ata1: EH complete [ 1680.032995] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1680.033015] ata1.00: BMDMA stat 0x25 [ 1680.033030] ata1.00: failed command: READ DMA [ 1680.033056] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1680.033061] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1680.033074] ata1.00: status: { DRDY ERR } [ 1680.048402] ata1.00: configured for UDMA/44 [ 1680.048491] sd 0:0:0:0: [sda] Unhandled sense code [ 1680.048502] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1680.048517] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 1680.048533] Descriptor sense data with sense descriptors (in hex): [ 1680.048541] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1680.048575] 02 cd f4 56 [ 1680.048590] sd 0:0:0:0: [sda] Add. Sense: Address mark not found for data field [ 1680.048615] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 02 cd f4 50 00 00 08 00 [ 1680.048648] end_request: I/O error, dev sda, sector 47051862 [ 1680.048788] ata1: EH complete [ 1682.049707] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1682.049728] ata1.00: BMDMA stat 0x25 [ 1682.049743] ata1.00: failed command: READ DMA [ 1682.049769] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1682.049774] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1682.049787] ata1.00: status: { DRDY ERR } [ 1682.064413] ata1.00: configured for UDMA/44 [ 1682.064485] ata1: EH complete [ 1683.900459] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1683.900480] ata1.00: BMDMA stat 0x25 [ 1683.900496] ata1.00: failed command: READ DMA [ 1683.900522] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1683.900527] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1683.900541] ata1.00: status: { DRDY ERR } [ 1683.916415] ata1.00: configured for UDMA/44 [ 1683.916482] ata1: EH complete [ 1685.821342] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1685.821363] ata1.00: BMDMA stat 0x25 [ 1685.821379] ata1.00: failed command: READ DMA [ 1685.821405] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1685.821410] res 51/40:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x9 (media error) [ 1685.821424] ata1.00: status: { DRDY ERR } [ 1685.821433] ata1.00: error: { UNC } [ 1685.836429] ata1.00: configured for UDMA/44 [ 1685.836496] ata1: EH complete [ 1687.820663] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1687.820685] ata1.00: BMDMA stat 0x25 [ 1687.820701] ata1.00: failed command: READ DMA [ 1687.820727] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1687.820733] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1687.820746] ata1.00: status: { DRDY ERR } [ 1687.836402] ata1.00: configured for UDMA/44 [ 1687.836470] ata1: EH complete [ 1689.820733] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1689.820756] ata1.00: BMDMA stat 0x25 [ 1689.820772] ata1.00: failed command: READ DMA [ 1689.820798] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1689.820804] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1689.820817] ata1.00: status: { DRDY ERR } [ 1689.836422] ata1.00: configured for UDMA/44 [ 1689.836489] ata1: EH complete [ 1691.668595] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1691.668616] ata1.00: BMDMA stat 0x25 [ 1691.668633] ata1.00: failed command: READ DMA [ 1691.668658] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 1691.668664] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 1691.668677] ata1.00: status: { DRDY ERR } [ 1691.684425] ata1.00: configured for UDMA/44 [ 1691.684509] sd 0:0:0:0: [sda] Unhandled sense code [ 1691.684519] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1691.684534] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 1691.684551] Descriptor sense data with sense descriptors (in hex): [ 1691.684560] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1691.684593] 02 cd f4 56 [ 1691.684608] sd 0:0:0:0: [sda] Add. Sense: Address mark not found for data field [ 1691.684632] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 02 cd f4 50 00 00 08 00 [ 1691.684666] end_request: I/O error, dev sda, sector 47051862 [ 1691.684789] ata1: EH complete [ 2370.353717] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2370.353739] ata1.00: BMDMA stat 0x25 [ 2370.353755] ata1.00: failed command: READ DMA [ 2370.353781] ata1.00: cmd c8/00:58:18:f4:cd/00:00:00:00:00/e2 tag 0 dma 45056 in [ 2370.353786] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2370.353799] ata1.00: status: { DRDY ERR } [ 2370.368447] ata1.00: configured for UDMA/44 [ 2370.368513] ata1: EH complete [ 2372.350886] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2372.350909] ata1.00: BMDMA stat 0x25 [ 2372.350925] ata1.00: failed command: READ DMA [ 2372.350951] ata1.00: cmd c8/00:58:18:f4:cd/00:00:00:00:00/e2 tag 0 dma 45056 in [ 2372.350956] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2372.350969] ata1.00: status: { DRDY ERR } [ 2372.364775] ata1.00: configured for UDMA/44 [ 2372.364846] ata1: EH complete [ 2374.362198] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2374.362220] ata1.00: BMDMA stat 0x25 [ 2374.362234] ata1.00: failed command: READ DMA [ 2374.362261] ata1.00: cmd c8/00:58:18:f4:cd/00:00:00:00:00/e2 tag 0 dma 45056 in [ 2374.362266] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2374.362279] ata1.00: status: { DRDY ERR } [ 2374.392413] ata1.00: configured for UDMA/44 [ 2374.392476] ata1: EH complete [ 2376.230296] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2376.230317] ata1.00: BMDMA stat 0x25 [ 2376.230331] ata1.00: failed command: READ DMA [ 2376.230358] ata1.00: cmd c8/00:58:18:f4:cd/00:00:00:00:00/e2 tag 0 dma 45056 in [ 2376.230363] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2376.230376] ata1.00: status: { DRDY ERR } [ 2376.244415] ata1.00: configured for UDMA/44 [ 2376.244477] ata1: EH complete [ 2378.077232] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2378.077252] ata1.00: BMDMA stat 0x25 [ 2378.077267] ata1.00: failed command: READ DMA [ 2378.077294] ata1.00: cmd c8/00:58:18:f4:cd/00:00:00:00:00/e2 tag 0 dma 45056 in [ 2378.077299] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2378.077312] ata1.00: status: { DRDY ERR } [ 2378.092417] ata1.00: configured for UDMA/44 [ 2378.092479] ata1: EH complete [ 2380.085577] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2380.085598] ata1.00: BMDMA stat 0x25 [ 2380.085613] ata1.00: failed command: READ DMA [ 2380.085639] ata1.00: cmd c8/00:58:18:f4:cd/00:00:00:00:00/e2 tag 0 dma 45056 in [ 2380.085644] res 51/01:1a:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2380.085657] ata1.00: status: { DRDY ERR } [ 2380.116415] ata1.00: configured for UDMA/44 [ 2380.116496] sd 0:0:0:0: [sda] Unhandled sense code [ 2380.116506] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2380.116521] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 2380.116538] Descriptor sense data with sense descriptors (in hex): [ 2380.116546] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 2380.116580] 02 cd f4 56 [ 2380.116595] sd 0:0:0:0: [sda] Add. Sense: Address mark not found for data field [ 2380.116620] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 02 cd f4 18 00 00 58 00 [ 2380.116653] end_request: I/O error, dev sda, sector 47051862 [ 2380.116805] ata1: EH complete [ 2382.262029] ata1.00: limiting speed to UDMA/33:PIO4 [ 2382.262056] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2382.262069] ata1.00: BMDMA stat 0x25 [ 2382.262084] ata1.00: failed command: READ DMA [ 2382.262110] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 2382.262116] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2382.262129] ata1.00: status: { DRDY ERR } [ 2382.262211] ata1: soft resetting link [ 2382.432450] ata1.00: configured for UDMA/33 [ 2382.432515] ata1: EH complete [ 2384.280340] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2384.280362] ata1.00: BMDMA stat 0x25 [ 2384.280377] ata1.00: failed command: READ DMA [ 2384.280403] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 2384.280408] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2384.280421] ata1.00: status: { DRDY ERR } [ 2384.296397] ata1.00: configured for UDMA/33 [ 2384.296458] ata1: EH complete [ 2386.345950] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2386.345971] ata1.00: BMDMA stat 0x25 [ 2386.345987] ata1.00: failed command: READ DMA [ 2386.346013] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 2386.346019] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2386.346032] ata1.00: status: { DRDY ERR } [ 2386.376413] ata1.00: configured for UDMA/33 [ 2386.376475] ata1: EH complete [ 2388.362607] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2388.362629] ata1.00: BMDMA stat 0x25 [ 2388.362645] ata1.00: failed command: READ DMA [ 2388.362671] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 2388.362676] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2388.362689] ata1.00: status: { DRDY ERR } [ 2388.376423] ata1.00: configured for UDMA/33 [ 2388.376491] ata1: EH complete [ 2390.210394] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2390.210416] ata1.00: BMDMA stat 0x25 [ 2390.210432] ata1.00: failed command: READ DMA [ 2390.210457] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 2390.210463] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2390.210476] ata1.00: status: { DRDY ERR } [ 2390.224413] ata1.00: configured for UDMA/33 [ 2390.224474] ata1: EH complete [ 2392.073122] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2392.073143] ata1.00: BMDMA stat 0x25 [ 2392.073158] ata1.00: failed command: READ DMA [ 2392.073184] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 2392.073190] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2392.073202] ata1.00: status: { DRDY ERR } [ 2392.088417] ata1.00: configured for UDMA/33 [ 2392.088491] sd 0:0:0:0: [sda] Unhandled sense code [ 2392.088501] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2392.088516] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 2392.088533] Descriptor sense data with sense descriptors (in hex): [ 2392.088541] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 2392.088574] 02 cd f4 56 [ 2392.088589] sd 0:0:0:0: [sda] Add. Sense: Address mark not found for data field [ 2392.088614] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 02 cd f4 50 00 00 08 00 [ 2392.088647] end_request: I/O error, dev sda, sector 47051862 [ 2392.088791] ata1: EH complete [ 2394.127555] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2394.127578] ata1.00: BMDMA stat 0x25 [ 2394.127594] ata1.00: failed command: READ DMA [ 2394.127620] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 2394.127626] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2394.127639] ata1.00: status: { DRDY ERR } [ 2394.140443] ata1.00: configured for UDMA/33 [ 2394.140514] ata1: EH complete [ 2395.969913] ata1.00: limiting speed to PIO4 [ 2395.969942] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2395.969955] ata1.00: BMDMA stat 0x25 [ 2395.969970] ata1.00: failed command: READ DMA [ 2395.969997] ata1.00: cmd c8/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 dma 4096 in [ 2395.970002] res 51/01:02:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2395.970015] ata1.00: status: { DRDY ERR } [ 2395.970097] ata1: soft resetting link [ 2396.140422] ata1.00: configured for PIO4 [ 2396.140491] ata1: EH complete [ 2397.920784] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2397.920813] ata1.00: failed command: READ MULTIPLE [ 2397.920840] ata1.00: cmd c4/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 pio 4096 in [ 2397.920846] res 51/01:08:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2397.920859] ata1.00: status: { DRDY ERR } [ 2397.936418] ata1.00: configured for PIO4 [ 2397.936489] ata1: EH complete [ 2399.775213] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2399.775243] ata1.00: failed command: READ MULTIPLE [ 2399.775270] ata1.00: cmd c4/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 pio 4096 in [ 2399.775275] res 51/01:08:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2399.775288] ata1.00: status: { DRDY ERR } [ 2399.788419] ata1.00: configured for PIO4 [ 2399.788490] ata1: EH complete [ 2401.692306] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2401.692335] ata1.00: failed command: READ MULTIPLE [ 2401.692362] ata1.00: cmd c4/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 pio 4096 in [ 2401.692368] res 51/01:08:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2401.692381] ata1.00: status: { DRDY ERR } [ 2401.708427] ata1.00: configured for PIO4 [ 2401.708496] ata1: EH complete [ 2403.907273] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2403.907304] ata1.00: failed command: READ MULTIPLE [ 2403.907331] ata1.00: cmd c4/00:08:50:f4:cd/00:00:00:00:00/e2 tag 0 pio 4096 in [ 2403.907337] res 51/01:08:56:f4:cd/00:00:00:00:00/e2 Emask 0x1 (device error) [ 2403.907350] ata1.00: status: { DRDY ERR } [ 2403.920418] ata1.00: configured for PIO4 [ 2403.920508] sd 0:0:0:0: [sda] Unhandled sense code [ 2403.920518] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2403.920534] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 2403.920551] Descriptor sense data with sense descriptors (in hex): [ 2403.920559] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 2403.920593] 02 cd f4 56 [ 2403.920608] sd 0:0:0:0: [sda] Add. Sense: Address mark not found for data field [ 2403.920632] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 02 cd f4 50 00 00 08 00 [ 2403.920665] end_request: I/O error, dev sda, sector 47051862 [ 2403.920812] ata1: EH complete