[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-30-generic (buildd@aatxe) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 (Ubuntu 3.2.0-30.48-generic 3.2.27) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfa0000 (usable) [ 0.000000] BIOS-e820: 000000003bfa0000 - 000000003bfae000 (ACPI data) [ 0.000000] BIOS-e820: 000000003bfae000 - 000000003bfe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: System manufacturer System Product Name/P5VD2-MX SE, BIOS 0701 10/17/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3bfa0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03C000000 mask FFC000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB [ 0.000000] reg 1, base: 960MB, range: 64MB, type UC [ 0.000000] total RAM covered: 960M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 2 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB [ 0.000000] reg 1, base: 960MB, range: 64MB, type UC [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 35a50000 - 36d20000 [ 0.000000] ACPI: RSDP 000fab00 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 3bfa0000 00034 (v01 A_M_I_ OEMRSDT 10000717 MSFT 00000097) [ 0.000000] ACPI: FACP 3bfa0200 00084 (v02 A_M_I_ OEMFACP 10000717 MSFT 00000097) [ 0.000000] ACPI: DSDT 3bfa0450 048F5 (v01 A0733 A0733000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 3bfae000 00040 [ 0.000000] ACPI: APIC 3bfa0390 00078 (v01 A_M_I_ OEMAPIC 10000717 MSFT 00000097) [ 0.000000] ACPI: MCFG 3bfa0410 0003C (v01 A_M_I_ OEMMCFG 10000717 MSFT 00000097) [ 0.000000] ACPI: OEMB 3bfae040 00046 (v01 A_M_I_ AMI_OEM 10000717 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 71MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003bfa0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003bfa0 [ 0.000000] On node 0 totalpages: 245551 [ 0.000000] free_area_init_node: node 0, pgdat c1822ec0, node_mem_map f707d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 144 pages used for memmap [ 0.000000] HighMem zone: 18194 pages, LIFO batch:3 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3c000000 (gap: 3c000000:c2c00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f7043000 s31616 r0 d21632 u53248 [ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243631 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-30-generic root=UUID=d7805323-e437-463f-afdf-95f347657c56 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3930368 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003bfa0) [ 0.000000] Memory: 940368k/982656k available (5618k kernel code, 41836k reserved, 2762k data, 712k init, 73352k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1830000 - 0xc18e2000 ( 712 kB) [ 0.000000] .data : 0xc157cac4 - 0xc182f5c0 (2762 kB) [ 0.000000] .text : 0xc1000000 - 0xc157cac4 (5618 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:1024 16 [ 0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1599.916 MHz processor. [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.83 BogoMIPS (lpj=6399664) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004039] Security Framework initialized [ 0.004063] AppArmor: AppArmor initialized [ 0.004066] Yama: becoming mindful. [ 0.004140] Mount-cache hash table entries: 512 [ 0.004331] Initializing cgroup subsys cpuacct [ 0.004340] Initializing cgroup subsys memory [ 0.004351] Initializing cgroup subsys devices [ 0.004354] Initializing cgroup subsys freezer [ 0.004357] Initializing cgroup subsys blkio [ 0.004366] Initializing cgroup subsys perf_event [ 0.004401] CPU: Physical Processor ID: 0 [ 0.004403] CPU: Processor Core ID: 0 [ 0.004408] mce: CPU supports 6 MCE banks [ 0.004419] CPU0: Thermal monitoring enabled (TM2) [ 0.004425] using mwait in idle threads. [ 0.009518] ACPI: Core revision 20110623 [ 0.016017] ftrace: allocating 25901 entries in 51 pages [ 0.024081] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.024708] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068800] CPU0: Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02 [ 0.072003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.072003] PEBS disabled due to CPU errata. [ 0.072003] ... version: 2 [ 0.072003] ... bit width: 40 [ 0.072003] ... generic registers: 2 [ 0.072003] ... value mask: 000000ffffffffff [ 0.072003] ... max period: 000000007fffffff [ 0.072003] ... fixed-purpose events: 3 [ 0.072003] ... event mask: 0000000700000003 [ 0.072003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.072003] CPU 1 irqstacks, hard=f50f2000 soft=f50f4000 [ 0.072003] Booting Node 0, Processors #1 [ 0.072003] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.160053] NMI watchdog enabled, takes one hw-pmu counter. [ 0.160108] Brought up 2 CPUs [ 0.160112] Total of 2 processors activated (6400.02 BogoMIPS). [ 0.161307] devtmpfs: initialized [ 0.161307] EVM: security.selinux [ 0.161307] EVM: security.SMACK64 [ 0.161307] EVM: security.capability [ 0.161307] PM: Registering ACPI NVS region at 3bfae000 (204800 bytes) [ 0.161542] print_constraints: dummy: [ 0.161593] RTC time: 19:21:28, date: 09/17/12 [ 0.161652] NET: Registered protocol family 16 [ 0.161699] Trying to unpack rootfs image as initramfs... [ 0.161856] EISA bus registered [ 0.161900] ACPI: bus type pci registered [ 0.161998] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.162002] PCI: not using MMCONFIG [ 0.164017] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 0.164020] PCI: Using configuration type 1 for base access [ 0.176241] bio: create slab at 0 [ 0.176383] ACPI: Added _OSI(Module Device) [ 0.176388] ACPI: Added _OSI(Processor Device) [ 0.176391] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.176395] ACPI: Added _OSI(Processor Aggregator Device) [ 0.177975] ACPI: EC: Look up EC in DSDT [ 0.179921] ACPI: Executed 1 blocks of module-level executable AML code [ 0.183472] ACPI: Interpreter enabled [ 0.183494] ACPI: (supports S0 S1 S3 S4 S5) [ 0.183530] ACPI: Using IOAPIC for interrupt routing [ 0.183575] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.185098] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.185102] PCI: Using MMCONFIG for extended config space [ 0.193299] ACPI: No dock devices found. [ 0.193303] HEST: Table not found. [ 0.193312] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.193415] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.193634] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.193638] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.193642] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.193647] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.193651] pci_root PNP0A03:00: host bridge window [mem 0x3c000000-0xff77ffff] (ignored) [ 0.193680] pci 0000:00:00.0: [1106:0327] type 0 class 0x000600 [ 0.193702] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.193818] pci 0000:00:00.1: [1106:1327] type 0 class 0x000600 [ 0.193891] pci 0000:00:00.2: [1106:2327] type 0 class 0x000600 [ 0.193963] pci 0000:00:00.3: [1106:3327] type 0 class 0x000600 [ 0.194036] pci 0000:00:00.4: [1106:4327] type 0 class 0x000600 [ 0.194110] pci 0000:00:00.5: [1106:5327] type 0 class 0x000800 [ 0.194224] pci 0000:00:00.6: [1106:6327] type 0 class 0x000600 [ 0.194297] pci 0000:00:00.7: [1106:7327] type 0 class 0x000600 [ 0.194373] pci 0000:00:01.0: [1106:b198] type 1 class 0x000604 [ 0.194465] pci 0000:00:02.0: [1106:a327] type 1 class 0x000604 [ 0.194591] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.194598] pci 0000:00:02.0: PME# disabled [ 0.194636] pci 0000:00:03.0: [1106:c327] type 1 class 0x000604 [ 0.194768] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.194774] pci 0000:00:03.0: PME# disabled [ 0.194836] pci 0000:00:0a.0: [10ec:8185] type 0 class 0x000200 [ 0.194859] pci 0000:00:0a.0: reg 10: [io 0xe800-0xe8ff] [ 0.194874] pci 0000:00:0a.0: reg 14: [mem 0xf9fffc00-0xf9ffffff] [ 0.194967] pci 0000:00:0a.0: supports D1 D2 [ 0.194970] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold [ 0.194977] pci 0000:00:0a.0: PME# disabled [ 0.195008] pci 0000:00:0f.0: [1106:0591] type 0 class 0x000101 [ 0.195032] pci 0000:00:0f.0: reg 10: [io 0xec00-0xec07] [ 0.195046] pci 0000:00:0f.0: reg 14: [io 0xe480-0xe483] [ 0.195060] pci 0000:00:0f.0: reg 18: [io 0xe400-0xe407] [ 0.195074] pci 0000:00:0f.0: reg 1c: [io 0xe080-0xe083] [ 0.195088] pci 0000:00:0f.0: reg 20: [io 0xe000-0xe00f] [ 0.195102] pci 0000:00:0f.0: reg 24: [io 0xd800-0xd8ff] [ 0.195174] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101 [ 0.195240] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f] [ 0.195335] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03 [ 0.195417] pci 0000:00:10.0: reg 20: [io 0xdc00-0xdc1f] [ 0.195475] pci 0000:00:10.0: supports D1 D2 [ 0.195478] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195485] pci 0000:00:10.0: PME# disabled [ 0.195508] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03 [ 0.195572] pci 0000:00:10.1: reg 20: [io 0xd480-0xd49f] [ 0.195630] pci 0000:00:10.1: supports D1 D2 [ 0.195634] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195640] pci 0000:00:10.1: PME# disabled [ 0.195663] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03 [ 0.195727] pci 0000:00:10.2: reg 20: [io 0xd400-0xd41f] [ 0.195797] pci 0000:00:10.2: supports D1 D2 [ 0.195800] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195807] pci 0000:00:10.2: PME# disabled [ 0.195829] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03 [ 0.195895] pci 0000:00:10.3: reg 20: [io 0xd080-0xd09f] [ 0.195957] pci 0000:00:10.3: supports D1 D2 [ 0.195961] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195967] pci 0000:00:10.3: PME# disabled [ 0.195989] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03 [ 0.196023] pci 0000:00:10.4: reg 10: [mem 0xf9fff800-0xf9fff8ff] [ 0.196130] pci 0000:00:10.4: supports D1 D2 [ 0.196133] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196141] pci 0000:00:10.4: PME# disabled [ 0.196171] pci 0000:00:11.0: [1106:3337] type 0 class 0x000601 [ 0.196323] pci 0000:00:11.7: [1106:287e] type 0 class 0x000600 [ 0.196417] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200 [ 0.196440] pci 0000:00:12.0: reg 10: [io 0xc800-0xc8ff] [ 0.196455] pci 0000:00:12.0: reg 14: [mem 0xf9fff400-0xf9fff4ff] [ 0.196555] pci 0000:00:12.0: supports D1 D2 [ 0.196559] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196565] pci 0000:00:12.0: PME# disabled [ 0.196590] pci 0000:00:13.0: [1106:337b] type 1 class 0x000604 [ 0.196771] pci 0000:01:00.0: [1106:3343] type 0 class 0x000300 [ 0.196794] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xbfffffff pref] [ 0.196806] pci 0000:01:00.0: reg 14: [mem 0xfa000000-0xfaffffff] [ 0.196853] pci 0000:01:00.0: reg 30: [mem 0xfbef0000-0xfbefffff pref] [ 0.196905] pci 0000:01:00.0: supports D1 D2 [ 0.196960] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.196970] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff] [ 0.196976] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref] [ 0.197045] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.197132] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.197209] pci 0000:04:01.0: [1106:3288] type 0 class 0x000403 [ 0.197232] pci 0000:04:01.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit] [ 0.197338] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold [ 0.197344] pci 0000:04:01.0: PME# disabled [ 0.197361] pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.197416] pci 0000:00:13.0: PCI bridge to [bus 04-04] [ 0.197425] pci 0000:00:13.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.197459] pci_bus 0000:00: on NUMA node 0 [ 0.197466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.197748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.197784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] [ 0.197848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] [ 0.197948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.198009] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.198014] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.198017] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.211590] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.211669] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.211743] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.211816] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.211892] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.211966] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.212050] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.212124] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.212378] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.212383] vgaarb: loaded [ 0.212386] vgaarb: bridge control possible 0000:01:00.0 [ 0.212583] i2c-core: driver [aat2870] using legacy suspend method [ 0.212586] i2c-core: driver [aat2870] using legacy resume method [ 0.212734] SCSI subsystem initialized [ 0.212831] libata version 3.00 loaded. [ 0.212923] usbcore: registered new interface driver usbfs [ 0.212941] usbcore: registered new interface driver hub [ 0.212983] usbcore: registered new device driver usb [ 0.213128] PCI: Using ACPI for IRQ routing [ 0.213134] PCI: pci_cache_line_size set to 64 bytes [ 0.213275] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.213279] reserve RAM buffer: 000000003bfa0000 - 000000003bffffff [ 0.213444] NetLabel: Initializing [ 0.213448] NetLabel: domain hash size = 128 [ 0.213450] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.213468] NetLabel: unlabeled traffic allowed by default [ 0.227563] AppArmor: AppArmor Filesystem Enabled [ 0.227645] pnp: PnP ACPI init [ 0.227694] ACPI: bus type pnp registered [ 0.227862] pnp 00:00: [bus 00-ff] [ 0.227867] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.227870] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.227874] pnp 00:00: [io 0x0d00-0xffff window] [ 0.227877] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.227881] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.227885] pnp 00:00: [mem 0x3c000000-0xff77ffff window] [ 0.227992] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.228162] pnp 00:01: [dma 4] [ 0.228166] pnp 00:01: [io 0x0000-0x000f] [ 0.228169] pnp 00:01: [io 0x0081-0x0083] [ 0.228173] pnp 00:01: [io 0x0087] [ 0.228176] pnp 00:01: [io 0x0089-0x008b] [ 0.228179] pnp 00:01: [io 0x008f] [ 0.228182] pnp 00:01: [io 0x00c0-0x00df] [ 0.228252] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.228271] pnp 00:02: [io 0x0070-0x0071] [ 0.228287] pnp 00:02: [irq 8] [ 0.228349] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.228363] pnp 00:03: [io 0x0061] [ 0.228417] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.228430] pnp 00:04: [io 0x00f0-0x00ff] [ 0.228438] pnp 00:04: [irq 13] [ 0.228492] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.229208] pnp 00:05: [irq 7] [ 0.229212] pnp 00:05: [dma 3] [ 0.229216] pnp 00:05: [io 0x0378-0x037f] [ 0.229219] pnp 00:05: [io 0x0778-0x077f] [ 0.229459] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.229571] pnp 00:06: [io 0x0010-0x001f] [ 0.229575] pnp 00:06: [io 0x0022-0x003f] [ 0.229578] pnp 00:06: [io 0x0044-0x005f] [ 0.229581] pnp 00:06: [io 0x0062-0x0063] [ 0.229584] pnp 00:06: [io 0x0065-0x006f] [ 0.229587] pnp 00:06: [io 0x0072-0x007f] [ 0.229590] pnp 00:06: [io 0x0080] [ 0.229593] pnp 00:06: [io 0x0084-0x0086] [ 0.229596] pnp 00:06: [io 0x0088] [ 0.229599] pnp 00:06: [io 0x008c-0x008e] [ 0.229602] pnp 00:06: [io 0x0090-0x009f] [ 0.229605] pnp 00:06: [io 0x00a2-0x00bf] [ 0.229608] pnp 00:06: [io 0x00e0-0x00ef] [ 0.229611] pnp 00:06: [io 0x03e0-0x03e7] [ 0.229614] pnp 00:06: [io 0x04d0-0x04d1] [ 0.229617] pnp 00:06: [io 0x0800-0x087f] [ 0.229620] pnp 00:06: [io 0x0400-0x041f] [ 0.229624] pnp 00:06: [io 0x0000-0xffffffff disabled] [ 0.229745] system 00:06: [io 0x03e0-0x03e7] has been reserved [ 0.229750] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.229754] system 00:06: [io 0x0800-0x087f] has been reserved [ 0.229758] system 00:06: [io 0x0400-0x041f] has been reserved [ 0.229763] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.229820] pnp 00:07: [io 0x0000-0xffffffff disabled] [ 0.229824] pnp 00:07: [io 0x0000-0xffffffff disabled] [ 0.229828] pnp 00:07: [io 0x0290-0x0297] [ 0.229922] system 00:07: [io 0x0290-0x0297] has been reserved [ 0.229928] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.229972] pnp 00:08: [io 0x0060] [ 0.229975] pnp 00:08: [io 0x0064] [ 0.229983] pnp 00:08: [irq 1] [ 0.230052] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.230436] pnp 00:09: [irq 4] [ 0.230440] pnp 00:09: [dma 0 disabled] [ 0.230443] pnp 00:09: [io 0x03f8-0x03ff] [ 0.230577] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.230648] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.230652] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.230747] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.230752] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.230757] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.230806] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 0.230896] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.230902] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.231081] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.231085] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.231089] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.231092] pnp 00:0c: [mem 0x00100000-0x3bffffff] [ 0.231095] pnp 00:0c: [mem 0xff780000-0xffffffff] [ 0.231201] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.231206] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.231210] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.231215] system 00:0c: [mem 0x00100000-0x3bffffff] could not be reserved [ 0.231219] system 00:0c: [mem 0xff780000-0xffffffff] has been reserved [ 0.231224] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.231421] pnp: PnP ACPI: found 13 devices [ 0.231424] ACPI: ACPI bus type pnp unregistered [ 0.231429] PnPBIOS: Disabled by ACPI PNP [ 0.268891] Switching to clocksource acpi_pm [ 0.269100] PCI: max bus depth: 1 pci_try_num: 2 [ 0.269163] pci 0000:00:03.0: BAR 14: assigned [mem 0x3c000000-0x3c1fffff] [ 0.269169] pci 0000:00:03.0: BAR 15: assigned [mem 0x3c200000-0x3c3fffff 64bit pref] [ 0.269174] pci 0000:00:03.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.269179] pci 0000:00:02.0: BAR 14: assigned [mem 0x3c400000-0x3c5fffff] [ 0.269183] pci 0000:00:02.0: BAR 15: assigned [mem 0x3c600000-0x3c7fffff 64bit pref] [ 0.269188] pci 0000:00:02.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.269193] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.269200] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff] [ 0.269207] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref] [ 0.269216] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.269220] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] [ 0.269228] pci 0000:00:02.0: bridge window [mem 0x3c400000-0x3c5fffff] [ 0.269234] pci 0000:00:02.0: bridge window [mem 0x3c600000-0x3c7fffff 64bit pref] [ 0.269243] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.269248] pci 0000:00:03.0: bridge window [io 0x1000-0x1fff] [ 0.269256] pci 0000:00:03.0: bridge window [mem 0x3c000000-0x3c1fffff] [ 0.269263] pci 0000:00:03.0: bridge window [mem 0x3c200000-0x3c3fffff 64bit pref] [ 0.269273] pci 0000:00:13.0: PCI bridge to [bus 04-04] [ 0.269281] pci 0000:00:13.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.269308] pci 0000:00:01.0: setting latency timer to 64 [ 0.269317] pci 0000:00:02.0: enabling device (0104 -> 0107) [ 0.269341] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 [ 0.269348] pci 0000:00:02.0: setting latency timer to 64 [ 0.269357] pci 0000:00:03.0: enabling device (0104 -> 0107) [ 0.269368] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 [ 0.269375] pci 0000:00:03.0: setting latency timer to 64 [ 0.269386] pci 0000:00:13.0: setting latency timer to 64 [ 0.269391] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.269395] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.269399] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbefffff] [ 0.269403] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff pref] [ 0.269407] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.269411] pci_bus 0000:02: resource 1 [mem 0x3c400000-0x3c5fffff] [ 0.269415] pci_bus 0000:02: resource 2 [mem 0x3c600000-0x3c7fffff 64bit pref] [ 0.269419] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.269423] pci_bus 0000:03: resource 1 [mem 0x3c000000-0x3c1fffff] [ 0.269427] pci_bus 0000:03: resource 2 [mem 0x3c200000-0x3c3fffff 64bit pref] [ 0.269431] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.269507] NET: Registered protocol family 2 [ 0.269627] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.269986] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.271358] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.271358] TCP: Hash tables configured (established 131072 bind 65536) [ 0.271358] TCP reno registered [ 0.271358] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.271358] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.271528] NET: Registered protocol family 1 [ 0.271580] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.271641] pci 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.271669] pci 0000:00:10.0: PCI INT A disabled [ 0.271701] pci 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.271724] pci 0000:00:10.1: PCI INT B disabled [ 0.271745] pci 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.271766] pci 0000:00:10.2: PCI INT C disabled [ 0.271783] pci 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.271805] pci 0000:00:10.3: PCI INT D disabled [ 0.271821] pci 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.271861] pci 0000:00:10.4: PCI INT C disabled [ 0.271883] pci 0000:01:00.0: Boot video device [ 0.271891] PCI: CLS 32 bytes, default 64 [ 0.272600] audit: initializing netlink socket (disabled) [ 0.272616] type=2000 audit(1347909688.268:1): initialized [ 0.302176] highmem bounce pool size: 64 pages [ 0.302186] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.305367] VFS: Disk quotas dquot_6.5.2 [ 0.305488] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.306386] fuse init (API version 7.17) [ 0.306537] msgmni has been set to 1693 [ 0.307069] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.307107] io scheduler noop registered [ 0.307110] io scheduler deadline registered [ 0.307122] io scheduler cfq registered (default) [ 0.307374] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.307465] pcieport 0000:00:02.0: irq 64 for MSI/MSI-X [ 0.307570] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.307654] pcieport 0000:00:03.0: irq 65 for MSI/MSI-X [ 0.307803] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.307842] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.307977] intel_idle: MWAIT substates: 0x20 [ 0.307980] intel_idle: does not run on family 6 model 15 [ 0.308166] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.308176] ACPI: Power Button [PWRB] [ 0.308254] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.308259] ACPI: Power Button [PWRF] [ 0.311031] ERST: Table is not found! [ 0.311035] GHES: HEST is not enabled! [ 0.311259] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.320437] isapnp: Scanning for PnP cards... [ 0.331716] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.674657] isapnp: No Plug & Play device found [ 0.774768] Freeing initrd memory: 19264k freed [ 0.872752] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.888452] Linux agpgart interface v0.103 [ 0.888584] agpgart: Detected VIA P4M890 chipset [ 0.900629] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.903011] brd: module loaded [ 0.904294] loop: module loaded [ 0.904604] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.904653] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.905243] Fixed MDIO Bus: probed [ 0.905275] tun: Universal TUN/TAP device driver, 1.6 [ 0.905278] tun: (C) 1999-2004 Max Krasnyansky [ 0.905361] PPP generic driver version 2.4.2 [ 0.905535] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.905561] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.905582] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.905655] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.905715] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9fff800 [ 0.916043] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.916294] hub 1-0:1.0: USB hub found [ 0.916301] hub 1-0:1.0: 8 ports detected [ 0.916424] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.916446] uhci_hcd: USB Universal Host Controller Interface driver [ 0.916480] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.916490] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.916562] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.916602] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000dc00 [ 0.916795] hub 2-0:1.0: USB hub found [ 0.916802] hub 2-0:1.0: 2 ports detected [ 0.916905] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.916915] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.916983] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.917021] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d480 [ 0.917211] hub 3-0:1.0: USB hub found [ 0.917217] hub 3-0:1.0: 2 ports detected [ 0.917319] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.917329] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.917401] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.917427] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400 [ 0.917615] hub 4-0:1.0: USB hub found [ 0.917621] hub 4-0:1.0: 2 ports detected [ 0.917732] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.917744] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.917814] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.917853] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d080 [ 0.918038] hub 5-0:1.0: USB hub found [ 0.918044] hub 5-0:1.0: 2 ports detected [ 0.918217] usbcore: registered new interface driver libusual [ 0.918294] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.918297] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.918512] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.918696] mousedev: PS/2 mouse device common for all mice [ 0.918931] rtc_cmos 00:02: RTC can wake from S4 [ 0.919117] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.919154] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.919269] device-mapper: uevent: version 1.0.3 [ 0.919386] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.919445] EISA: Probing bus 0 at eisa.0 [ 0.919453] Cannot allocate resource for EISA slot 1 [ 0.919457] Cannot allocate resource for EISA slot 2 [ 0.919487] EISA: Detected 0 cards. [ 0.919502] cpufreq-nforce2: No nForce2 chipset. [ 0.919505] cpuidle: using governor ladder [ 0.919508] cpuidle: using governor menu [ 0.919511] EFI Variables Facility v0.08 2004-May-17 [ 0.919921] TCP cubic registered [ 0.920125] NET: Registered protocol family 10 [ 0.921050] NET: Registered protocol family 17 [ 0.921058] Registering the dns_resolver key type [ 0.921088] Using IPI No-Shortcut mode [ 0.921269] PM: Hibernation image not present or could not be loaded. [ 0.921287] registered taskstats version 1 [ 0.931234] Magic number: 12:135:395 [ 0.931375] rtc_cmos 00:02: setting system clock to 2012-09-17 19:21:29 UTC (1347909689) [ 0.931407] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.931409] EDD information not available. [ 0.931592] Freeing unused kernel memory: 712k freed [ 0.931911] Write protecting the kernel text: 5620k [ 0.931984] Write protecting the kernel read-only data: 2324k [ 0.933172] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.960708] udevd[87]: starting version 175 [ 1.072506] sata_via 0000:00:0f.0: version 2.6 [ 1.072533] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.072580] sata_via 0000:00:0f.0: routed to hard irq line 3 [ 1.074718] scsi0 : sata_via [ 1.078739] scsi1 : sata_via [ 1.081568] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 21 [ 1.081574] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 21 [ 1.081664] pata_via 0000:00:0f.1: version 0.3.4 [ 1.084378] scsi2 : pata_via [ 1.086369] scsi3 : pata_via [ 1.088503] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.088508] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.090020] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker [ 1.090088] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.095095] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xf9fff400, 00:1b:fc:39:17:1d, IRQ 23 [ 1.095809] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7869 advertising 01e1 Link 45e1 [ 1.228046] usb 1-2: new high-speed USB device number 2 using ehci_hcd [ 1.252432] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H44N, RB01, max UDMA/66 [ 1.268302] ata3.00: configured for UDMA/66 [ 1.284049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.300068] Refined TSC clocksource calibration: 1599.979 MHz. [ 1.300076] Switching to clocksource tsc [ 1.448383] ata1.00: ATA-8: SAMSUNG HD161HJ, JF100-14, max UDMA7 [ 1.448391] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.456412] ata1.00: configured for UDMA/133 [ 1.456648] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5 [ 1.457025] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.457037] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.457177] sd 0:0:0:0: [sda] Write Protect is off [ 1.457182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.457228] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.501205] sda: sda1 sda2 < sda5 sda6 > [ 1.501837] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.660066] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.674252] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H44N RB01 PQ: 0 ANSI: 5 [ 1.679985] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.679991] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.680249] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.680450] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.880080] usb 4-2: new full-speed USB device number 2 using uhci_hcd [ 2.076239] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.0/input/input3 [ 2.076463] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.2-2/input0 [ 2.081742] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.1/input/input4 [ 2.082455] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.2-2/input1 [ 2.082737] usbcore: registered new interface driver usbhid [ 2.082742] usbhid: USB HID core driver [ 3.151517] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 3.151522] vesafb: scrolling: redraw [ 3.151526] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 3.152791] vesafb: framebuffer at 0xa0000000, mapped to 0xf8080000, using 3072k, total 3072k [ 3.153065] Console: switching to colour frame buffer device 128x48 [ 3.153099] fb0: VESA VGA frame buffer device [ 3.489675] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 22.852147] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.427542] udevd[347]: starting version 175 [ 23.481764] lp: driver loaded but no devices found [ 23.505846] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr [ 23.619174] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.704310] cfg80211: Calling CRDA to update world regulatory domain [ 23.820140] ppdev: user-space parallel port driver [ 23.823002] parport_pc 00:05: reported by Plug and Play ACPI [ 23.823122] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 23.825221] Bluetooth: Core ver 2.16 [ 23.825260] NET: Registered protocol family 31 [ 23.825264] Bluetooth: HCI device and connection manager initialized [ 23.825269] Bluetooth: HCI socket layer initialized [ 23.825272] Bluetooth: L2CAP socket layer initialized [ 23.825281] Bluetooth: SCO socket layer initialized [ 23.839058] Bluetooth: RFCOMM TTY layer initialized [ 23.839068] Bluetooth: RFCOMM socket layer initialized [ 23.839071] Bluetooth: RFCOMM ver 1.11 [ 23.904572] rtl8180 0000:00:0a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 23.921223] lp0: using parport0 (interrupt-driven). [ 23.944441] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.944446] Bluetooth: BNEP filters: protocol multicast [ 24.011290] type=1400 audit(1347920512.574:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=608 comm="apparmor_parser" [ 24.012477] type=1400 audit(1347920512.578:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=608 comm="apparmor_parser" [ 24.017120] type=1400 audit(1347920512.582:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=628 comm="apparmor_parser" [ 24.036980] type=1400 audit(1347920512.602:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=628 comm="apparmor_parser" [ 24.037337] type=1400 audit(1347920512.602:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=628 comm="apparmor_parser" [ 24.052848] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 24.052855] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052859] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 24.052864] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052868] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 24.052872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052875] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 24.052879] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052883] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 24.052887] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052890] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 24.052894] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052898] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 24.052902] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052905] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 24.052909] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052913] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 24.052917] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052920] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 24.052924] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052928] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 24.052932] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.052935] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 24.052940] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 24.052943] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 24.052947] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 24.052951] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 24.052955] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 24.074378] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 24.076440] ieee80211 phy0: hwaddr 0018e761322c, RTL8185vD + rtl8225z2 [ 24.195176] snd_hda_intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 24.195184] hda_intel: position_fix set to 1 for device 1043:81e7 [ 24.195257] snd_hda_intel 0000:04:01.0: irq 66 for MSI/MSI-X [ 24.195301] snd_hda_intel 0000:04:01.0: setting latency timer to 64 [ 24.195308] snd_hda_intel 0000:04:01.0: PCI: Disallowing DAC for device [ 24.318855] input: HDA VIA VT82xx Line as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input5 [ 24.320397] input: HDA VIA VT82xx Front Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input6 [ 24.320676] input: HDA VIA VT82xx Rear Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input7 [ 24.320905] input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input8 [ 24.321138] input: HDA VIA VT82xx Line-Out as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input9 [ 24.328698] Linux video capture interface: v2.00 [ 24.329866] uvcvideo: Found UVC 1.00 device FaceCam 1320 (0458:707b) [ 24.337283] input: FaceCam 1320 as /devices/pci0000:00/0000:00:10.4/usb1/1-2/1-2:1.0/input/input10 [ 24.337496] usbcore: registered new interface driver uvcvideo [ 24.337500] USB Video Class driver (1.1.1) [ 24.555688] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.609019] nf_conntrack version 0.5.0 (15005 buckets, 60020 max) [ 24.613934] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 24.613943] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.613947] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 24.613951] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.613955] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 24.613959] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.613963] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 24.613967] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.613970] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 24.613974] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.613978] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 24.613982] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.613985] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 24.613989] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.613993] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 24.613997] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.614000] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 24.614004] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.614008] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 24.614012] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.614015] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 24.614019] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.614023] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 24.614027] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.614030] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 24.614034] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.614038] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 24.614042] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.614047] cfg80211: World regulatory domain updated: [ 24.614050] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.614055] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.614059] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.614063] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.614067] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.614071] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.767998] init: failsafe main process (729) killed by TERM signal [ 24.863416] type=1400 audit(1347920513.426:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=968 comm="apparmor_parser" [ 24.865930] type=1400 audit(1347920513.430:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=967 comm="apparmor_parser" [ 24.867570] type=1400 audit(1347920513.430:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=969 comm="apparmor_parser" [ 24.868345] type=1400 audit(1347920513.434:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=969 comm="apparmor_parser" [ 24.868697] type=1400 audit(1347920513.434:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=969 comm="apparmor_parser" [ 24.922773] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.952752] via-rhine 0000:00:12.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 25.523461] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 25.523902] zram: Creating 2 devices ... [ 25.538807] init: isc-dhcp-server pre-start process (1125) terminated with status 127 [ 25.543223] init: isc-dhcp-server6 pre-start process (1139) terminated with status 127 [ 25.590773] Adding 240084k swap on /dev/zram0. Priority:5 extents:1 across:240084k SS [ 25.635358] init: zram-config pre-start process (1136) terminated with status 1 [ 25.672098] init: gdm main process (1236) killed by TERM signal [ 25.950737] [drm] Initialized drm 1.1.0 20060810 [ 25.952652] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.955334] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 25.955340] [drm] No driver support for vblank timestamp query. [ 25.955346] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 [ 25.958476] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 25.958515] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 25.958681] pci 0000:01:00.0: putting AGP V3 device into 8x mode [ 30.892491] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.242947] init: plymouth-stop pre-start process (2103) terminated with status 1 [ 35.416014] eth0: no IPv6 routers present [ 1389.588105] wlan0: Trigger new scan to find an IBSS to join [ 1390.834447] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 1395.004063] wlan0: Trigger new scan to find an IBSS to join [ 1399.008428] wlan0: Trigger new scan to find an IBSS to join [ 1400.504117] wlan0: Creating new IBSS network, BSSID 7a:d2:a5:24:d6:63 [ 1411.552027] wlan0: no IPv6 routers present [ 1449.056070] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1495.615537] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1549.024048] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1581.024033] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1629.024061] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1684.064051] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1729.056128] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1760.992056] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1793.056058] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1861.088068] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1893.088056] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1912.248225] init: isc-dhcp-server pre-start process (4443) terminated with status 127 [ 1925.088043] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1939.548711] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 1939.548887] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 1969.056099] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1969.579921] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 1969.580126] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 1999.611322] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 1999.611491] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2001.056052] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2029.642176] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2029.642343] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2033.056065] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2059.671322] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2059.671496] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2089.056032] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2089.699306] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2089.699464] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2119.726870] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2119.727038] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2140.000062] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2149.758039] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2149.758205] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2172.064103] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2179.788001] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2179.788231] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2208.992102] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2209.816970] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2209.817140] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2239.844054] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2239.844231] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2240.992120] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2269.874831] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2269.874992] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2272.688051] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2299.904230] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2299.904402] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2329.930842] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2329.931009] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2333.024054] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2359.963916] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2359.964127] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2365.024048] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2389.996865] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2389.997038] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2397.024087] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2420.023009] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2420.023177] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2449.056103] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2450.053562] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2450.053721] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2480.077773] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2480.077930] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2480.838231] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2510.110365] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2510.110536] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2513.056094] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2540.139004] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2540.139163] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2569.056080] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2570.169782] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2570.169954] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2600.200742] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2600.200906] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2601.056057] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2630.228616] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2630.228772] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2633.056053] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2660.257271] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2660.257430] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2688.992079] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2690.288960] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2690.289130] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2720.319942] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2720.320155] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2721.056065] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2750.351706] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2750.351886] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2752.992228] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2759.063240] init: isc-dhcp-server pre-start process (6400) terminated with status 127 [ 2766.562437] init: isc-dhcp-server pre-start process (6619) terminated with status 127 [ 2780.381219] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2780.381383] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2809.056028] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2810.410430] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2810.410719] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2840.451022] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2840.451357] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2859.104034] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2870.481126] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2870.481292] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2891.104052] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2900.507231] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2900.507413] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2929.056156] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2930.538987] Inbound IN=eth0 OUT= MAC= SRC=10.0.0.9 DST=10.255.255.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2930.539149] Unknown InputIN=wlan0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=162 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17500 DPT=17500 LEN=142 [ 2943.208069] wlan0: Trigger new scan to find an IBSS to join [ 2947.008059] wlan0: Trigger new scan to find an IBSS to join [ 2951.008062] wlan0: Trigger new scan to find an IBSS to join [ 2952.504082] wlan0: Creating new IBSS network, BSSID 2a:ff:d4:9e:ca:b4 [ 2962.792034] wlan0: no IPv6 routers present [ 2983.008115] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3049.056029] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3088.561399] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3149.024067] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3229.024069] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3287.008062] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3329.056059] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)