[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 7fa3e000 - 7ffbfbf2 [ 0.000000] Allocated new RAMDISK: 008de000 - 00e5fbf2 [ 0.000000] Move RAMDISK from 000000007fa3e000 - 000000007ffbfbf1 to 008de000 - 00e5fbf1 [ 0.000000] ACPI: RSDP 000f73d0 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 7fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 7fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 7fff30c0 046F8 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7fff0000 00040 [ 0.000000] ACPI: APIC 7fff77c0 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd08a] BRK ==> [00008da000 - 00008dd08a] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 0000e5fbf2] NEW RAMDISK ==> [00008de000 - 0000e5fbf2] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524160 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u4194304 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520064 [ 0.000000] Kernel command line: BOOT_IMAGE=/install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10485120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0) [ 0.000000] Memory: 2054420k/2097088k available (4673k kernel code, 41240k reserved, 2122k data, 656k init, 1187784k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1830.139 MHz processor. [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3660.27 BogoMIPS (lpj=7320556) [ 0.008035] Security Framework initialized [ 0.008071] AppArmor: AppArmor initialized [ 0.008082] Mount-cache hash table entries: 512 [ 0.008264] Initializing cgroup subsys ns [ 0.008270] Initializing cgroup subsys cpuacct [ 0.008275] Initializing cgroup subsys memory [ 0.008288] Initializing cgroup subsys devices [ 0.008292] Initializing cgroup subsys freezer [ 0.008295] Initializing cgroup subsys net_cls [ 0.008322] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008326] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008331] mce: CPU supports 4 MCE banks [ 0.008355] Performance Events: AMD PMU driver. [ 0.008363] ... version: 0 [ 0.008366] ... bit width: 48 [ 0.008368] ... generic registers: 4 [ 0.008370] ... value mask: 0000ffffffffffff [ 0.008373] ... max period: 00007fffffffffff [ 0.008376] ... fixed-purpose events: 0 [ 0.008378] ... event mask: 000000000000000f [ 0.008383] Checking 'hlt' instruction... OK. [ 0.024629] SMP alternatives: switching to UP code [ 0.031161] Freeing SMP alternatives: 19k freed [ 0.031190] ACPI: Core revision 20090903 [ 0.040024] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040033] ftrace: allocating 21771 entries in 43 pages [ 0.044148] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044541] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.087224] CPU0: AMD Athlon(tm) XP 2500+ stepping 00 [ 0.088001] Brought up 1 CPUs [ 0.088001] Total of 1 processors activated (3660.27 BogoMIPS). [ 0.088001] CPU0 attaching NULL sched-domain. [ 0.088001] devtmpfs: initialized [ 0.088001] regulator: core version 0.5 [ 0.088001] Time: 13:03:08 Date: 10/07/11 [ 0.088001] NET: Registered protocol family 16 [ 0.088001] EISA bus registered [ 0.088001] ACPI: bus type pci registered [ 0.117424] PCI: PCI BIOS revision 2.10 entry at 0xfbbb0, last bus=3 [ 0.117427] PCI: Using configuration type 1 for base access [ 0.118599] bio: create slab at 0 [ 0.119626] ACPI: EC: Look up EC in DSDT [ 0.126893] ACPI: Interpreter enabled [ 0.126901] ACPI: (supports S0 S1 S4 S5) [ 0.126931] ACPI: Using IOAPIC for interrupt routing [ 0.135713] ACPI: No dock devices found. [ 0.135834] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.135888] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff] [ 0.136137] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f] [ 0.136175] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.136180] pci 0000:00:01.1: PME# disabled [ 0.136214] pci 0000:00:02.0: reg 10 32bit mmio: [0xe8087000-0xe8087fff] [ 0.136251] pci 0000:00:02.0: supports D1 D2 [ 0.136254] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136259] pci 0000:00:02.0: PME# disabled [ 0.136287] pci 0000:00:02.1: reg 10 32bit mmio: [0xe8082000-0xe8082fff] [ 0.136324] pci 0000:00:02.1: supports D1 D2 [ 0.136327] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136331] pci 0000:00:02.1: PME# disabled [ 0.136366] pci 0000:00:02.2: reg 10 32bit mmio: [0xe8083000-0xe80830ff] [ 0.136409] pci 0000:00:02.2: supports D1 D2 [ 0.136412] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136417] pci 0000:00:02.2: PME# disabled [ 0.136453] pci 0000:00:04.0: reg 10 32bit mmio: [0xe8086000-0xe8086fff] [ 0.136460] pci 0000:00:04.0: reg 14 io port: [0xe000-0xe007] [ 0.136493] pci 0000:00:04.0: supports D1 D2 [ 0.136496] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136501] pci 0000:00:04.0: PME# disabled [ 0.136529] pci 0000:00:05.0: reg 10 32bit mmio: [0xe8000000-0xe807ffff] [ 0.136566] pci 0000:00:05.0: supports D1 D2 [ 0.136594] pci 0000:00:06.0: reg 10 io port: [0xe400-0xe4ff] [ 0.136601] pci 0000:00:06.0: reg 14 io port: [0xd000-0xd07f] [ 0.136608] pci 0000:00:06.0: reg 18 32bit mmio: [0xe8080000-0xe8080fff] [ 0.136637] pci 0000:00:06.0: supports D1 D2 [ 0.136708] pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f] [ 0.136760] pci 0000:00:0d.0: reg 10 32bit mmio: [0xe8084000-0xe80847ff] [ 0.136767] pci 0000:00:0d.0: reg 14 32bit mmio: [0xe8085000-0xe808503f] [ 0.136801] pci 0000:00:0d.0: supports D1 D2 [ 0.136803] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136808] pci 0000:00:0d.0: PME# disabled [ 0.136905] pci 0000:01:0b.0: reg 10 io port: [0xa000-0xa03f] [ 0.136914] pci 0000:01:0b.0: reg 14 io port: [0xa400-0xa40f] [ 0.136923] pci 0000:01:0b.0: reg 18 io port: [0xa800-0xa87f] [ 0.136931] pci 0000:01:0b.0: reg 1c 32bit mmio: [0xe7020000-0xe7020fff] [ 0.136940] pci 0000:01:0b.0: reg 20 32bit mmio: [0xe7000000-0xe701ffff] [ 0.136973] pci 0000:01:0b.0: supports D1 [ 0.137010] pci 0000:00:08.0: bridge io port: [0xa000-0xafff] [ 0.137015] pci 0000:00:08.0: bridge 32bit mmio: [0xe7000000-0xe7ffffff] [ 0.137054] pci 0000:03:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.137062] pci 0000:03:00.0: reg 14 io port: [0xc000-0xc0ff] [ 0.137069] pci 0000:03:00.0: reg 18 32bit mmio: [0xe6000000-0xe600ffff] [ 0.137087] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.137109] pci 0000:03:00.0: supports D1 D2 [ 0.137139] pci 0000:03:00.1: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.137146] pci 0000:03:00.1: reg 14 32bit mmio: [0xe6010000-0xe601ffff] [ 0.137181] pci 0000:03:00.1: supports D1 D2 [ 0.137223] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.137228] pci 0000:00:1e.0: bridge 32bit mmio: [0xe5000000-0xe6ffffff] [ 0.137233] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.137244] pci_bus 0000:00: on NUMA node 0 [ 0.137251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.137409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.137640] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.198686] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.198862] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.199037] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.199210] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 0.199381] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.199555] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.199728] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.199901] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.200085] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.200278] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.200456] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.200632] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.200805] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 0.200984] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.201161] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.201334] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.201491] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 0.201630] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 0.201768] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 0.201906] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 0.202043] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.202244] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 0.202446] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 0.202647] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 0.202848] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 [ 0.203049] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 0.203250] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 0.203391] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 0.203589] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 0.203790] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 [ 0.203991] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 0.204211] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.204388] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.204392] vgaarb: loaded [ 0.204559] SCSI subsystem initialized [ 0.204673] libata version 3.00 loaded. [ 0.204788] usbcore: registered new interface driver usbfs [ 0.204805] usbcore: registered new interface driver hub [ 0.204843] usbcore: registered new device driver usb [ 0.205021] ACPI: WMI: Mapper loaded [ 0.205024] PCI: Using ACPI for IRQ routing [ 0.205234] NetLabel: Initializing [ 0.205237] NetLabel: domain hash size = 128 [ 0.205239] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.205258] NetLabel: unlabeled traffic allowed by default [ 0.205298] Switching to clocksource tsc [ 0.208001] AppArmor: AppArmor Filesystem Enabled [ 0.208001] pnp: PnP ACPI init [ 0.208001] ACPI: bus type pnp registered [ 0.212162] pnp: PnP ACPI: found 13 devices [ 0.212166] ACPI: ACPI bus type pnp unregistered [ 0.212171] PnPBIOS: Disabled by ACPI PNP [ 0.212194] system 00:00: ioport range 0x4000-0x407f has been reserved [ 0.212198] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 0.212202] system 00:00: ioport range 0x4400-0x447f has been reserved [ 0.212206] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 0.212209] system 00:00: ioport range 0x4200-0x427f has been reserved [ 0.212213] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 0.212221] system 00:01: ioport range 0x5000-0x503f has been reserved [ 0.212224] system 00:01: ioport range 0x5040-0x507f has been reserved [ 0.212233] system 00:02: iomem range 0xd5800-0xd7fff has been reserved [ 0.212237] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved [ 0.212241] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 0.212245] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 0.212249] system 00:02: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.212253] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved [ 0.212258] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 0.212262] system 00:02: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.212266] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.212270] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.212278] system 00:04: ioport range 0xb78-0xb7b has been reserved [ 0.212281] system 00:04: ioport range 0xf78-0xf7b has been reserved [ 0.212285] system 00:04: ioport range 0xa78-0xa7b has been reserved [ 0.212289] system 00:04: ioport range 0xe78-0xe7b has been reserved [ 0.212293] system 00:04: ioport range 0xbbc-0xbbf has been reserved [ 0.212296] system 00:04: ioport range 0xfbc-0xfbf has been reserved [ 0.212300] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.212304] system 00:04: ioport range 0x294-0x297 has been reserved [ 0.247071] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.247075] pci 0000:00:08.0: IO window: 0xa000-0xafff [ 0.247083] pci 0000:00:08.0: MEM window: 0xe7000000-0xe7ffffff [ 0.247087] pci 0000:00:08.0: PREFETCH window: disabled [ 0.247099] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.247103] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.247108] pci 0000:00:1e.0: MEM window: 0xe5000000-0xe6ffffff [ 0.247113] pci 0000:00:1e.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.247128] pci 0000:00:08.0: setting latency timer to 64 [ 0.247138] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.247141] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.247145] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.247149] pci_bus 0000:01: resource 1 mem: [0xe7000000-0xe7ffffff] [ 0.247153] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.247156] pci_bus 0000:03: resource 1 mem: [0xe5000000-0xe6ffffff] [ 0.247159] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.247206] NET: Registered protocol family 2 [ 0.247321] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.247794] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.249181] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.249852] TCP: Hash tables configured (established 131072 bind 65536) [ 0.249856] TCP reno registered [ 0.249988] NET: Registered protocol family 1 [ 0.302710] pci 0000:03:00.0: Boot video device [ 0.302970] cpufreq-nforce2: Detected nForce2 chipset revision C1 [ 0.302973] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss. [ 0.302984] cpufreq-nforce2: FSB currently at 166 MHz, FID 11.0 [ 0.303011] Marking TSC unstable due to cpufreq changes [ 0.304073] Scanning for low memory corruption every 60 seconds [ 0.304204] audit: initializing netlink socket (disabled) [ 0.304219] type=2000 audit(1317992588.302:1): initialized [ 0.314837] Switching to clocksource acpi_pm [ 0.314952] Trying to unpack rootfs image as initramfs... [ 0.328561] highmem bounce pool size: 64 pages [ 0.328570] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.336082] VFS: Disk quotas dquot_6.5.2 [ 0.336222] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.336990] fuse init (API version 7.13) [ 0.337101] msgmni has been set to 1694 [ 0.337383] alg: No test for stdrng (krng) [ 0.337425] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.337429] io scheduler noop registered [ 0.337432] io scheduler anticipatory registered [ 0.337435] io scheduler deadline registered [ 0.337487] io scheduler cfq registered (default) [ 0.337652] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.337681] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.337810] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.337817] ACPI: Power Button [PWRB] [ 0.337898] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.337902] ACPI: Power Button [PWRF] [ 0.337963] fan PNP0C0B:00: registered as cooling_device0 [ 0.337970] ACPI: Fan [FAN] (on) [ 0.338573] processor LNXCPU:00: registered as cooling_device1 [ 0.343338] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.343347] ACPI: Thermal Zone [THRM] (41 C) [ 0.348378] isapnp: Scanning for PnP cards... [ 0.355816] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.355941] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.356109] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.356474] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.356625] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.357992] brd: module loaded [ 0.358609] loop: module loaded [ 0.358731] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.358973] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 0.359369] Fixed MDIO Bus: probed [ 0.359414] PPP generic driver version 2.4.2 [ 0.359462] tun: Universal TUN/TAP device driver, 1.6 [ 0.359465] tun: (C) 1999-2004 Max Krasnyansky [ 0.359567] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.359968] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.360029] alloc irq_desc for 22 on node -1 [ 0.360032] alloc kstat_irqs on node -1 [ 0.360042] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22 [ 0.412337] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 0.412344] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 0.412472] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 0.412510] ehci_hcd 0000:00:02.2: debug port 1 [ 0.412516] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable [ 0.412523] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported [ 0.412555] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe8083000 [ 0.424081] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 0.424282] usb usb1: configuration #1 chosen from 1 choice [ 0.424329] hub 1-0:1.0: USB hub found [ 0.424347] hub 1-0:1.0: 6 ports detected [ 0.424442] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.424855] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.424863] alloc irq_desc for 21 on node -1 [ 0.424866] alloc kstat_irqs on node -1 [ 0.424876] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21 [ 0.424900] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.424905] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.424962] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.424999] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe8087000 [ 0.498299] usb usb2: configuration #1 chosen from 1 choice [ 0.498347] hub 2-0:1.0: USB hub found [ 0.498362] hub 2-0:1.0: 3 ports detected [ 0.498827] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 0.498835] alloc irq_desc for 20 on node -1 [ 0.498839] alloc kstat_irqs on node -1 [ 0.498849] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20 [ 0.498873] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.498878] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 0.498933] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 0.498970] ohci_hcd 0000:00:02.1: irq 20, io mem 0xe8082000 [ 0.590318] usb usb3: configuration #1 chosen from 1 choice [ 0.590363] hub 3-0:1.0: USB hub found [ 0.590382] hub 3-0:1.0: 3 ports detected [ 0.590462] uhci_hcd: USB Universal Host Controller Interface driver [ 0.590596] PNP: No PS/2 controller found. Probing ports directly. [ 0.714647] Freeing initrd memory: 5638k freed [ 0.765208] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 0.853149] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.853375] mice: PS/2 mouse device common for all mice [ 0.853517] rtc_cmos 00:06: RTC can wake from S4 [ 0.853585] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.853619] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.853754] device-mapper: uevent: version 1.0.3 [ 0.853957] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.854033] device-mapper: multipath: version 1.1.0 loaded [ 0.854037] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.854198] EISA: Probing bus 0 at eisa.0 [ 0.854221] Cannot allocate resource for EISA slot 4 [ 0.854224] Cannot allocate resource for EISA slot 5 [ 0.854240] EISA: Detected 0 cards. [ 0.854332] cpuidle: using governor ladder [ 0.854334] cpuidle: using governor menu [ 0.854848] TCP cubic registered [ 0.855049] NET: Registered protocol family 10 [ 0.855580] lo: Disabled Privacy Extensions [ 0.855944] NET: Registered protocol family 17 [ 0.856039] powernow-k8: Processor cpuid 6a0 not supported [ 0.856063] Using IPI No-Shortcut mode [ 0.856158] PM: Resume from disk failed. [ 0.856179] registered taskstats version 1 [ 0.856487] Magic number: 15:440:78 [ 0.856615] rtc_cmos 00:06: setting system clock to 2011-10-07 13:03:09 UTC (1317992589) [ 0.856620] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.856622] EDD information not available. [ 0.900542] isapnp: No Plug & Play device found [ 0.900793] Freeing unused kernel memory: 656k freed [ 0.901622] Write protecting the kernel text: 4676k [ 0.901660] Write protecting the kernel read-only data: 1840k [ 0.977575] usb 1-3: configuration #1 chosen from 1 choice [ 0.977826] hub 1-3:1.0: USB hub found [ 0.978164] hub 1-3:1.0: 4 ports detected [ 1.224064] pata_amd 0000:00:09.0: version 0.4.1 [ 1.224138] pata_amd 0000:00:09.0: setting latency timer to 64 [ 1.256647] scsi0 : pata_amd [ 1.260512] FDC 0 is a post-1991 82077 [ 1.327716] scsi1 : pata_amd [ 1.328818] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.328823] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.332073] usb 2-3: new low speed USB device using ohci_hcd and address 2 [ 1.370092] sata_promise 0000:01:0b.0: version 2.12 [ 1.370345] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 1.370354] alloc irq_desc for 18 on node -1 [ 1.370357] alloc kstat_irqs on node -1 [ 1.370367] sata_promise 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18 [ 1.384128] scsi2 : sata_promise [ 1.384299] scsi3 : sata_promise [ 1.384432] scsi4 : sata_promise [ 1.384494] ata3: SATA max UDMA/133 mmio m4096@0xe7020000 ata 0xe7020200 irq 18 [ 1.384499] ata4: SATA max UDMA/133 mmio m4096@0xe7020000 ata 0xe7020280 irq 18 [ 1.384503] ata5: PATA max UDMA/133 mmio m4096@0xe7020000 ata 0xe7020300 irq 18 [ 1.492493] ata1.00: ATA-6: WDC WD400JB-00JJC0, 05.01C05, max UDMA/100 [ 1.492498] ata1.00: 78165360 sectors, multi 16: LBA [ 1.492529] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc60000c5) ACPI=0x3f01f (20:600:0x13) [ 1.500405] ata1.00: configured for UDMA/100 [ 1.500564] scsi 0:0:0:0: Direct-Access ATA WDC WD400JB-00JJ 05.0 PQ: 0 ANSI: 5 [ 1.500782] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.501201] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.501270] sd 0:0:0:0: [sda] Write Protect is off [ 1.501274] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.501310] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.501508] sda: sda1 [ 1.512656] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.546420] usb 2-3: configuration #1 chosen from 1 choice [ 1.620295] usb 1-3.1: new low speed USB device using ehci_hcd and address 4 [ 1.704053] ata3: SATA link down (SStatus 0 SControl 300) [ 1.719929] usb 1-3.1: configuration #1 chosen from 1 choice [ 1.738245] usbcore: registered new interface driver hiddev [ 1.744797] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input3 [ 1.745019] generic-usb 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:02.0-3/input0 [ 1.748229] input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7 as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.1/1-3.1:1.0/input/input4 [ 1.748436] generic-usb 0003:0B39:0D04.0002: input,hidraw1: USB HID v1.10 Keyboard [USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7] on usb-0000:00:02.2-3.1/input0 [ 1.754752] input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7 as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.1/1-3.1:1.1/input/input5 [ 1.755358] generic-usb 0003:0B39:0D04.0003: input,hidraw2: USB HID v1.10 Mouse [USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7] on usb-0000:00:02.2-3.1/input1 [ 1.755403] usbcore: registered new interface driver usbhid [ 1.755523] usbhid: v2.6:USB HID core driver [ 1.792335] usb 1-3.3: new low speed USB device using ehci_hcd and address 5 [ 1.856363] ata2.01: ATAPI: LITE-ON DVDRW LH-18A1P, GL0F, max UDMA/66 [ 1.856395] ata2: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc60000c5) ACPI=0x1f01f (600:30:0x1c) [ 1.856400] ata2.01: limited to UDMA/33 due to 40-wire cable [ 1.888297] ata2.01: configured for UDMA/33 [ 1.889103] usb 1-3.3: configuration #1 chosen from 1 choice [ 1.890926] scsi 1:0:1:0: CD-ROM LITE-ON DVDRW LH-18A1P GL0F PQ: 0 ANSI: 5 [ 1.892760] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.3/1-3.3:1.0/input/input6 [ 1.893062] generic-usb 0003:413C:3016.0004: input,hidraw3: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:02.2-3.3/input0 [ 1.895218] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.895226] Uniform CD-ROM driver Revision: 3.20 [ 1.895414] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 1.895515] sr 1:0:1:0: Attached scsi generic sg1 type 5 [ 1.964342] usb 1-3.4: new high speed USB device using ehci_hcd and address 6 [ 2.056742] usb 1-3.4: configuration #1 chosen from 1 choice [ 2.057181] hub 1-3.4:1.0: USB hub found [ 2.057349] hub 1-3.4:1.0: 7 ports detected [ 2.216064] ata4: SATA link down (SStatus 0 SControl 300) [ 2.328157] usb 1-3.4.3: new low speed USB device using ehci_hcd and address 7 [ 2.379400] vga16fb: initializing [ 2.379407] vga16fb: mapped to 0xc00a0000 [ 2.379509] fb0: VGA16 VGA frame buffer device [ 2.385451] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22 [ 2.385461] ohci1394 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 22 (level, high) -> IRQ 22 [ 2.385468] ohci1394 0000:00:0d.0: setting latency timer to 64 [ 2.494677] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[e8084000-e80847ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.510223] usb 1-3.4.3: configuration #1 chosen from 1 choice [ 2.516357] input: Compaq Compaq Numeric Keypad as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.0/input/input7 [ 2.516506] generic-usb 0003:049F:0024.0005: input,hidraw4: USB HID v1.00 Keyboard [Compaq Compaq Numeric Keypad] on usb-0000:00:02.2-3.4.3/input0 [ 2.587377] Console: switching to colour frame buffer device 80x30 [ 2.636092] usb 1-3.4.4: new full speed USB device using ehci_hcd and address 8 [ 2.729367] usb 1-3.4.4: configuration #1 chosen from 1 choice [ 2.729922] hub 1-3.4.4:1.0: USB hub found [ 2.730077] hub 1-3.4.4:1.0: 4 ports detected [ 2.800113] usb 1-3.4.6: new high speed USB device using ehci_hcd and address 9 [ 2.900149] usb 1-3.4.6: configuration #1 chosen from 1 choice [ 2.940306] Initializing USB Mass Storage driver... [ 2.941377] scsi5 : SCSI emulation for USB Mass Storage devices [ 2.941653] usbcore: registered new interface driver usb-storage [ 2.941658] USB Mass Storage support registered. [ 2.942481] usb-storage: device found at 9 [ 2.942485] usb-storage: waiting for device to settle before scanning [ 3.000261] usb 1-3.4.4.1: new full speed USB device using ehci_hcd and address 10 [ 3.094430] usb 1-3.4.4.1: configuration #1 chosen from 1 choice [ 3.164196] usb 1-3.4.4.4: new low speed USB device using ehci_hcd and address 11 [ 3.265579] usb 1-3.4.4.4: configuration #1 chosen from 1 choice [ 3.273118] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.4/1-3.4.4.4/1-3.4.4.4:1.0/input/input8 [ 3.273674] generic-usb 0003:0A81:0205.0008: input,hidraw5: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:02.2-3.4.4.4/input0 [ 3.282676] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.4/1-3.4.4.4/1-3.4.4.4:1.1/input/input9 [ 3.283285] generic-usb 0003:0A81:0205.0009: input,hidraw6: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:02.2-3.4.4.4/input1 [ 3.634334] ohci1394: fw-host0: SelfID received outside of bus reset sequence [ 3.904209] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000031f932] [ 7.940355] usb-storage: device scan complete [ 7.942956] scsi 5:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2 [ 7.944565] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 7.951323] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 27.894948] Intel ISA PCIC probe: not found. [ 29.902878] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 29.980162] ISO 9660 Extensions: RRIP_1991A [ 69.893634] parport_pc 00:0c: reported by Plug and Play ACPI [ 69.893696] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 69.895034] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 69.895427] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 69.895435] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 21 (level, high) -> IRQ 21 [ 69.895442] forcedeth 0000:00:04.0: setting latency timer to 64 [ 69.895506] nv_probe: set workaround bit for reversed mac addr [ 70.412966] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x57d @ 1, addr 00:0c:76:3d:cc:8a [ 70.412972] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 72.237312] eth0: no link during initialization. [ 72.237836] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 130.056809] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 130.090919] JFS: nTxBlock = 8192, nTxLock = 65536 [ 130.145098] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 130.146508] SGI XFS Quota Management subsystem [ 210.074795] Adding 1642488k swap on /dev/mapper/stanwinchester-swap_1. Priority:-1 extents:1 across:1642488k [ 226.506256] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 322.472033] ata1: lost interrupt (Status 0x58) [ 322.472063] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 322.472070] ata1.00: failed command: WRITE DMA [ 322.472079] ata1.00: cmd ca/00:7b:68:32:8c/00:00:00:00:00/e0 tag 0 dma 62976 out [ 322.472081] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 322.472084] ata1.00: status: { DRDY } [ 322.472116] ata1: soft resetting link [ 322.652518] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc60000c5) ACPI=0x3f01f (20:600:0x13) [ 322.660422] ata1.00: configured for UDMA/100 [ 322.660428] ata1.00: device reported invalid CHS sector 0 [ 322.660437] ata1: EH complete [ 353.000024] ata1: lost interrupt (Status 0x58) [ 353.000043] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 353.000048] ata1.00: failed command: WRITE DMA [ 353.000055] ata1.00: cmd ca/00:7b:68:32:8c/00:00:00:00:00/e0 tag 0 dma 62976 out [ 353.000057] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 353.000060] ata1.00: status: { DRDY } [ 353.000082] ata1: soft resetting link [ 353.164556] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc60000c5) ACPI=0x3f01f (20:600:0x13) [ 353.172406] ata1.00: configured for UDMA/100 [ 353.172411] ata1.00: device reported invalid CHS sector 0 [ 353.172418] ata1: EH complete [ 384.000027] ata1: lost interrupt (Status 0x58) [ 384.000046] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 384.000050] ata1.00: failed command: WRITE DMA [ 384.000058] ata1.00: cmd ca/00:7b:68:32:8c/00:00:00:00:00/e0 tag 0 dma 62976 out [ 384.000060] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 384.000063] ata1.00: status: { DRDY } [ 384.000085] ata1: soft resetting link [ 384.164572] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc60000c5) ACPI=0x3f01f (20:600:0x13) [ 384.172396] ata1.00: configured for UDMA/100 [ 384.172401] ata1.00: device reported invalid CHS sector 0 [ 384.172408] ata1: EH complete [ 415.000025] ata1: lost interrupt (Status 0x58) [ 415.000043] ata1.00: limiting speed to UDMA/66:PIO4 [ 415.000047] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 415.000052] ata1.00: failed command: WRITE DMA [ 415.000059] ata1.00: cmd ca/00:7b:68:32:8c/00:00:00:00:00/e0 tag 0 dma 62976 out [ 415.000061] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 415.000064] ata1.00: status: { DRDY } [ 415.000086] ata1: soft resetting link [ 415.164540] ata1: nv_mode_filter: 0x1f39f&0x3f39f->0x1f39f, BIOS=0x3f000 (0xc60000c5) ACPI=0x3f01f (20:600:0x13) [ 415.172406] ata1.00: configured for UDMA/66 [ 415.172411] ata1.00: device reported invalid CHS sector 0 [ 415.172418] ata1: EH complete [ 446.000025] ata1: lost interrupt (Status 0x58) [ 446.000042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 446.000047] ata1.00: failed command: WRITE DMA [ 446.000054] ata1.00: cmd ca/00:7b:68:32:8c/00:00:00:00:00/e0 tag 0 dma 62976 out [ 446.000056] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 446.000059] ata1.00: status: { DRDY } [ 446.000080] ata1: soft resetting link [ 446.164553] ata1: nv_mode_filter: 0x1f39f&0x3f39f->0x1f39f, BIOS=0x3f000 (0xc60000c5) ACPI=0x3f01f (20:600:0x13) [ 446.172399] ata1.00: configured for UDMA/66 [ 446.172404] ata1.00: device reported invalid CHS sector 0 [ 446.172411] ata1: EH complete [ 477.000025] ata1: lost interrupt (Status 0x58) [ 477.000042] ata1.00: limiting speed to UDMA/33:PIO4 [ 477.000046] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 477.000051] ata1.00: failed command: WRITE DMA [ 477.000058] ata1.00: cmd ca/00:7b:68:32:8c/00:00:00:00:00/e0 tag 0 dma 62976 out [ 477.000060] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 477.000063] ata1.00: status: { DRDY } [ 477.000084] ata1: soft resetting link [ 477.164556] ata1: nv_mode_filter: 0x739f&0x3f39f->0x739f, BIOS=0x3f000 (0xc60000c5) ACPI=0x3f01f (20:600:0x13) [ 477.180409] ata1.00: configured for UDMA/33 [ 477.180414] ata1.00: device reported invalid CHS sector 0 [ 477.180428] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 477.180433] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 477.180439] Descriptor sense data with sense descriptors (in hex): [ 477.180442] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 477.180452] 00 00 00 00 [ 477.180456] sd 0:0:0:0: [sda] Add. Sense: No additional sense information [ 477.180461] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 8c 32 68 00 00 7b 00 [ 477.180471] end_request: I/O error, dev sda, sector 9187944 [ 477.180482] Buffer I/O error on device dm-0, logical block 1085725 [ 477.180485] lost page write due to I/O error on dm-0 [ 477.180506] ata1: EH complete [ 477.324516] JBD2: Detected IO errors while flushing file data on dm-0-8 [ 2007.646326] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:02.2-3.4.3/input0, status -71 [ 2007.650318] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:02.2-3.4.4.4/input0, status -71 [ 2007.774833] usb 1-3.3: USB disconnect, address 5 [ 2007.905109] usb 1-3.4: USB disconnect, address 6 [ 2007.905115] usb 1-3.4.3: USB disconnect, address 7 [ 2012.648026] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:02.2-3.4.4.4/input1, status -110 [ 2012.648033] usb 1-3.4: clear tt 3 (0070) error -19 [ 2012.648037] usb 1-3.4: clear tt 4 (00b0) error -19 [ 2012.650048] usb 1-3.4.4: USB disconnect, address 8 [ 2012.650053] usb 1-3.4.4.1: USB disconnect, address 10 [ 2012.651233] usb 1-3.4.4.4: USB disconnect, address 11 [ 2012.655738] usb 1-3.4.6: USB disconnect, address 9 [ 3904.724306] usb 1-3.3: new low speed USB device using ehci_hcd and address 12 [ 3904.821223] usb 1-3.3: configuration #1 chosen from 1 choice [ 3904.825225] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.3/1-3.3:1.0/input/input10 [ 3904.825833] generic-usb 0003:413C:3016.000A: input,hidraw3: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:02.2-3.3/input0 [ 3905.024354] usb 1-3.4: new high speed USB device using ehci_hcd and address 13 [ 3905.116747] usb 1-3.4: configuration #1 chosen from 1 choice [ 3905.117197] hub 1-3.4:1.0: USB hub found [ 3905.117351] hub 1-3.4:1.0: 7 ports detected [ 3905.388161] usb 1-3.4.3: new low speed USB device using ehci_hcd and address 14 [ 3905.485549] usb 1-3.4.3: configuration #1 chosen from 1 choice [ 3905.491497] input: Compaq Compaq Numeric Keypad as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.0/input/input11 [ 3905.492223] generic-usb 0003:049F:0024.000B: input,hidraw4: USB HID v1.00 Keyboard [Compaq Compaq Numeric Keypad] on usb-0000:00:02.2-3.4.3/input0 [ 3905.564179] usb 1-3.4.4: new full speed USB device using ehci_hcd and address 15 [ 3905.657213] usb 1-3.4.4: configuration #1 chosen from 1 choice [ 3905.657362] hub 1-3.4.4:1.0: USB hub found [ 3905.657725] hub 1-3.4.4:1.0: 4 ports detected [ 3905.728096] usb 1-3.4.6: new high speed USB device using ehci_hcd and address 16 [ 3905.828130] usb 1-3.4.6: configuration #1 chosen from 1 choice [ 3905.836273] scsi6 : SCSI emulation for USB Mass Storage devices [ 3905.836902] usb-storage: device found at 16 [ 3905.836905] usb-storage: waiting for device to settle before scanning [ 3905.928124] usb 1-3.4.4.1: new full speed USB device using ehci_hcd and address 17 [ 3906.022262] usb 1-3.4.4.1: configuration #1 chosen from 1 choice [ 3906.092142] usb 1-3.4.4.4: new low speed USB device using ehci_hcd and address 18 [ 3906.193317] usb 1-3.4.4.4: configuration #1 chosen from 1 choice [ 3906.200670] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.4/1-3.4.4.4/1-3.4.4.4:1.0/input/input12 [ 3906.201239] generic-usb 0003:0A81:0205.000E: input,hidraw5: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:02.2-3.4.4.4/input0 [ 3906.210127] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.4/1-3.4.4.4/1-3.4.4.4:1.1/input/input13 [ 3906.210850] generic-usb 0003:0A81:0205.000F: input,hidraw6: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:02.2-3.4.4.4/input1 [ 3910.836322] usb-storage: device scan complete [ 3910.839057] scsi 6:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2 [ 3910.840590] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3910.848566] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 4052.033567] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:02.2-3.4.3/input0, status -71 [ 4052.037556] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:02.2-3.4.4.4/input0, status -71 [ 4052.261089] usb 1-3.3: USB disconnect, address 12 [ 4052.389240] usb 1-3.4: USB disconnect, address 13 [ 4052.389245] usb 1-3.4.3: USB disconnect, address 14 [ 4057.036040] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:02.2-3.4.4.4/input1, status -110 [ 4057.036050] usb 1-3.4: clear tt 3 (00e0) error -19 [ 4057.036055] usb 1-3.4: clear tt 4 (0120) error -19 [ 4057.036533] usb 1-3.4.4: USB disconnect, address 15 [ 4057.036536] usb 1-3.4.4.1: USB disconnect, address 17 [ 4057.036803] usb 1-3.4.4.4: USB disconnect, address 18 [ 4057.037554] usb 1-3.4.6: USB disconnect, address 16 [ 4062.444354] usb 1-3.3: new low speed USB device using ehci_hcd and address 19 [ 4062.540905] usb 1-3.3: configuration #1 chosen from 1 choice [ 4062.545040] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.3/1-3.3:1.0/input/input14 [ 4062.545677] generic-usb 0003:413C:3016.0010: input,hidraw3: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:02.2-3.3/input0 [ 4062.744277] usb 1-3.4: new high speed USB device using ehci_hcd and address 20 [ 4062.836805] usb 1-3.4: configuration #1 chosen from 1 choice [ 4062.837346] hub 1-3.4:1.0: USB hub found [ 4062.837524] hub 1-3.4:1.0: 7 ports detected [ 4063.108210] usb 1-3.4.3: new low speed USB device using ehci_hcd and address 21 [ 4063.205745] usb 1-3.4.3: configuration #1 chosen from 1 choice [ 4063.212102] input: Compaq Compaq Numeric Keypad as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.0/input/input15 [ 4063.212664] generic-usb 0003:049F:0024.0011: input,hidraw4: USB HID v1.00 Keyboard [Compaq Compaq Numeric Keypad] on usb-0000:00:02.2-3.4.3/input0 [ 4063.284100] usb 1-3.4.4: new full speed USB device using ehci_hcd and address 22 [ 4063.377281] usb 1-3.4.4: configuration #1 chosen from 1 choice [ 4063.377476] hub 1-3.4.4:1.0: USB hub found [ 4063.377883] hub 1-3.4.4:1.0: 4 ports detected [ 4063.449598] usb 1-3.4.6: new high speed USB device using ehci_hcd and address 23 [ 4063.548088] usb 1-3.4.6: configuration #1 chosen from 1 choice [ 4063.559608] scsi7 : SCSI emulation for USB Mass Storage devices [ 4063.560513] usb-storage: device found at 23 [ 4063.560516] usb-storage: waiting for device to settle before scanning [ 4063.648183] usb 1-3.4.4.1: new full speed USB device using ehci_hcd and address 24 [ 4063.742335] usb 1-3.4.4.1: configuration #1 chosen from 1 choice [ 4063.812188] usb 1-3.4.4.4: new low speed USB device using ehci_hcd and address 25 [ 4063.913497] usb 1-3.4.4.4: configuration #1 chosen from 1 choice [ 4063.920713] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.4/1-3.4.4.4/1-3.4.4.4:1.0/input/input16 [ 4063.921298] generic-usb 0003:0A81:0205.0014: input,hidraw5: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:02.2-3.4.4.4/input0 [ 4063.930538] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.4/1-3.4.4.4/1-3.4.4.4:1.1/input/input17 [ 4063.931255] generic-usb 0003:0A81:0205.0015: input,hidraw6: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:02.2-3.4.4.4/input1 [ 4068.560405] usb-storage: device scan complete [ 4068.562969] scsi 7:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2 [ 4068.564970] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 4068.571836] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 4347.983768] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:02.2-3.4.4.4/input0, status -71 [ 4347.988276] usb 1-3.3: USB disconnect, address 19 [ 4348.117060] usb 1-3.4: USB disconnect, address 20 [ 4348.117066] usb 1-3.4.3: USB disconnect, address 21 [ 4348.117523] usb 1-3.4.4: USB disconnect, address 22 [ 4348.117526] usb 1-3.4.4.1: USB disconnect, address 24 [ 4348.117797] usb 1-3.4.4.4: USB disconnect, address 25 [ 4348.118662] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:02.2-3.4.4.4/input1, status -108 [ 4348.118671] usb 1-3.4: clear tt 4 (0190) error -19 [ 4348.124665] usb 1-3.4.6: USB disconnect, address 23 [ 4449.068317] usb 1-3.3: new low speed USB device using ehci_hcd and address 26 [ 4449.165222] usb 1-3.3: configuration #1 chosen from 1 choice [ 4449.172183] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.3/1-3.3:1.0/input/input18 [ 4449.172479] generic-usb 0003:413C:3016.0016: input,hidraw3: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:02.2-3.3/input0 [ 4449.372352] usb 1-3.4: new high speed USB device using ehci_hcd and address 27 [ 4449.464756] usb 1-3.4: configuration #1 chosen from 1 choice [ 4449.465309] hub 1-3.4:1.0: USB hub found [ 4449.465470] hub 1-3.4:1.0: 7 ports detected [ 4449.736189] usb 1-3.4.3: new low speed USB device using ehci_hcd and address 28 [ 4449.838068] usb 1-3.4.3: configuration #1 chosen from 1 choice [ 4449.844279] input: Compaq Compaq Numeric Keypad as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.0/input/input19 [ 4449.844529] generic-usb 0003:049F:0024.0017: input,hidraw4: USB HID v1.00 Keyboard [Compaq Compaq Numeric Keypad] on usb-0000:00:02.2-3.4.3/input0 [ 4449.916179] usb 1-3.4.4: new full speed USB device using ehci_hcd and address 29 [ 4450.009364] usb 1-3.4.4: configuration #1 chosen from 1 choice [ 4450.009932] hub 1-3.4.4:1.0: USB hub found [ 4450.010057] hub 1-3.4.4:1.0: 4 ports detected [ 4450.080224] usb 1-3.4.6: new high speed USB device using ehci_hcd and address 30 [ 4450.180250] usb 1-3.4.6: configuration #1 chosen from 1 choice [ 4450.188282] scsi8 : SCSI emulation for USB Mass Storage devices [ 4450.188903] usb-storage: device found at 30 [ 4450.188906] usb-storage: waiting for device to settle before scanning [ 4450.280125] usb 1-3.4.4.1: new full speed USB device using ehci_hcd and address 31 [ 4450.374422] usb 1-3.4.4.1: configuration #1 chosen from 1 choice [ 4450.444152] usb 1-3.4.4.4: new low speed USB device using ehci_hcd and address 32 [ 4450.545436] usb 1-3.4.4.4: configuration #1 chosen from 1 choice [ 4450.552727] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.4/1-3.4.4.4/1-3.4.4.4:1.0/input/input20 [ 4450.553286] generic-usb 0003:0A81:0205.001A: input,hidraw5: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:02.2-3.4.4.4/input0 [ 4450.562096] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4.4/1-3.4.4.4/1-3.4.4.4:1.1/input/input21 [ 4450.562770] generic-usb 0003:0A81:0205.001B: input,hidraw6: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:02.2-3.4.4.4/input1 [ 4455.188357] usb-storage: device scan complete [ 4455.190919] scsi 8:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2 [ 4455.192565] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 4455.200559] sd 8:0:0:0: [sdb] Attached SCSI removable disk