[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-46-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #75-Ubuntu SMP Tue Feb 10 15:24:04 UTC 2015 (Ubuntu 3.13.0-46.75-generic 3.13.11-ckt15) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-46-generic.efi.signed root=UUID=572eb147-3d44-459e-9499-0298d71a596a ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b7d55fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7d56000-0x00000000b7d85fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b7d86000-0x00000000b7ed2fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7ed3000-0x00000000b83c7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b83c8000-0x00000000b8b5cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8b5d000-0x00000000b8bbdfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000b8bbe000-0x00000000b8d76fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b8d77000-0x00000000b8ff9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8ffa000-0x00000000b8ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xb835a000 ACPI 2.0=0xb835a000 SMBIOS=0xb8aa7e18 [ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB) [ 0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB) [ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001503000) (20MB) [ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001503000-0x0000000002000000) (10MB) [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003403000) (20MB) [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000003403000-0x0000000020000000) (459MB) [ 0.000000] efi: mem08: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB) [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000020100000-0x0000000035b08000) (346MB) [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000035b08000-0x0000000036d7c000) (18MB) [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000036d7c000-0x000000006e8c8000) (891MB) [ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000006e8c8000-0x0000000099000000) (679MB) [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000099000000-0x0000000099020000) (0MB) [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000099020000-0x00000000a9a20000) (266MB) [ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x00000000a9a20000-0x00000000a9b0a000) (0MB) [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000a9b0a000-0x00000000b7756000) (220MB) [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000b7756000-0x00000000b7af0000) (3MB) [ 0.000000] efi: mem18: type=3, attr=0xf, range=[0x00000000b7af0000-0x00000000b7d56000) (2MB) [ 0.000000] efi: mem19: type=0, attr=0xf, range=[0x00000000b7d56000-0x00000000b7d86000) (0MB) [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000b7d86000-0x00000000b7ec9000) (1MB) [ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x00000000b7ec9000-0x00000000b7ed3000) (0MB) [ 0.000000] efi: mem22: type=10, attr=0xf, range=[0x00000000b7ed3000-0x00000000b83c8000) (4MB) [ 0.000000] efi: mem23: type=6, attr=0x800000000000000f, range=[0x00000000b83c8000-0x00000000b8b5d000) (7MB) [ 0.000000] efi: mem24: type=5, attr=0x800000000000000f, range=[0x00000000b8b5d000-0x00000000b8bbe000) (0MB) [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000b8bbe000-0x00000000b8d77000) (1MB) [ 0.000000] efi: mem26: type=6, attr=0x800000000000000f, range=[0x00000000b8d77000-0x00000000b8ffa000) (2MB) [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000b8ffa000-0x00000000b9000000) (0MB) [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000100000000-0x0000000140000000) (1024MB) [ 0.000000] efi: mem29: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) [ 0.000000] efi: mem30: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB) [ 0.000000] efi: mem31: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. X551MA/X551MA, BIOS X551MA.402 02/08/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0B9000000 mask FFF000000 uncachable [ 0.000000] 3 base 0BA000000 mask FFE000000 uncachable [ 0.000000] 4 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 2960MB, range: 16MB, type UC [ 0.000000] reg 3, base: 2976MB, range: 32MB, type UC [ 0.000000] reg 4, base: 3008MB, range: 64MB, type UC [ 0.000000] reg 5, base: 4GB, range: 1GB, type WB [ 0.000000] total RAM covered: 3984M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 512MB, type WB [ 0.000000] reg 2, base: 2560MB, range: 256MB, type WB [ 0.000000] reg 3, base: 2816MB, range: 128MB, type WB [ 0.000000] reg 4, base: 2944MB, range: 16MB, type WB [ 0.000000] reg 5, base: 4GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xb9000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xb9000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02fe1000, 0x02fe1fff] PGTABLE [ 0.000000] BRK [0x02fe2000, 0x02fe2fff] PGTABLE [ 0.000000] BRK [0x02fe3000, 0x02fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M [ 0.000000] BRK [0x02fe4000, 0x02fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20100000-0xb7d55fff] [ 0.000000] [mem 0x20100000-0x201fffff] page 4k [ 0.000000] [mem 0x20200000-0xb7bfffff] page 2M [ 0.000000] [mem 0xb7c00000-0xb7d55fff] page 4k [ 0.000000] BRK [0x02fe5000, 0x02fe5fff] PGTABLE [ 0.000000] BRK [0x02fe6000, 0x02fe6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xb7d86000-0xb7ed2fff] [ 0.000000] [mem 0xb7d86000-0xb7ed2fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb8bbe000-0xb8d76fff] [ 0.000000] [mem 0xb8bbe000-0xb8d76fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb8ffa000-0xb8ffffff] [ 0.000000] [mem 0xb8ffa000-0xb8ffffff] page 4k [ 0.000000] RAMDISK: [mem 0x35b08000-0x36d7bfff] [ 0.000000] ACPI: RSDP 00000000b835a000 000024 (v02 _ASUS_) [ 0.000000] ACPI: XSDT 00000000b835a080 00008C (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000b836c9c0 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000b835a1a0 01281D (v02 _ASUS_ Notebook 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 00000000b83c7f80 000040 [ 0.000000] ACPI: APIC 00000000b836cad0 000068 (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000b836cb38 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000b836cb80 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) [ 0.000000] ACPI: LPIT 00000000b836cbc0 000104 (v01 _ASUS_ Notebook 00000003 VLV2 0100000D) [ 0.000000] ACPI: ECDT 00000000b836ccc8 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.000000] ACPI: HPET 00000000b836cd90 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000b836cdc8 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b836d530 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b836d7c0 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000b836d940 000042 (v01 _ASUS_ Notebook 00000000 00000000) [ 0.000000] ACPI: BGRT 00000000b836d988 000038 (v00 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: MSDM 00000000b7d83f98 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] [ 0.000000] NODE_DATA [mem 0x13fff5000-0x13fff9fff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008efff] [ 0.000000] node 0: [mem 0x00090000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20100000-0xb7d55fff] [ 0.000000] node 0: [mem 0xb7d86000-0xb7ed2fff] [ 0.000000] node 0: [mem 0xb8bbe000-0xb8d76fff] [ 0.000000] node 0: [mem 0xb8ffa000-0xb8ffffff] [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] [ 0.000000] On node 0 totalpages: 1015550 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11710 pages used for memmap [ 0.000000] DMA32 zone: 749410 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] low edge lint[0xa3]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x7c]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 103 [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7d56000-0xb7d85fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7ed3000-0xb83c7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb83c8000-0xb8b5cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8b5d000-0xb8bbdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8d77000-0xb8ff9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9000000-0xbaffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82368 r8192 d24128 u1048576 [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999658 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-46-generic.efi.signed root=UUID=572eb147-3d44-459e-9499-0298d71a596a ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3664868K/4062200K available (7384K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 397332K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-1. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1866.744 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.48 BogoMIPS (lpj=7466976) [ 0.000010] pid_max: default: 32768 minimum: 301 [ 0.001949] Security Framework initialized [ 0.001977] AppArmor: AppArmor initialized [ 0.001981] Yama: becoming mindful. [ 0.002572] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004589] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005510] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.005524] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.005915] Initializing cgroup subsys memory [ 0.005930] Initializing cgroup subsys devices [ 0.005934] Initializing cgroup subsys freezer [ 0.005938] Initializing cgroup subsys blkio [ 0.005941] Initializing cgroup subsys perf_event [ 0.005947] Initializing cgroup subsys hugetlb [ 0.005978] CPU: Physical Processor ID: 0 [ 0.005981] CPU: Processor Core ID: 0 [ 0.005988] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.005988] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.011907] mce: CPU supports 6 MCE banks [ 0.011919] CPU0: Thermal monitoring enabled (TM1) [ 0.011930] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.011930] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0 [ 0.011930] tlb_flushall_shift: 6 [ 0.012088] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.013534] ACPI: Core revision 20131115 [ 0.034079] ACPI: All ACPI Tables successfully acquired [ 0.049242] ftrace: allocating 28563 entries in 112 pages [ 0.067280] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.107003] smpboot: CPU0: Intel(R) Celeron(R) CPU N2815 @ 1.86GHz (fam: 06, model: 37, stepping: 03) [ 0.107018] TSC deadline timer enabled [ 0.107037] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.107049] ... version: 3 [ 0.107052] ... bit width: 40 [ 0.107054] ... generic registers: 2 [ 0.107057] ... value mask: 000000ffffffffff [ 0.107059] ... max period: 000000ffffffffff [ 0.107061] ... fixed-purpose events: 3 [ 0.107063] ... event mask: 0000000700000003 [ 0.110286] x86: Booting SMP configuration: [ 0.110293] .... node #0, CPUs: #1 [ 0.129293] x86: Booted up 1 node, 2 CPUs [ 0.129300] smpboot: Total of 2 processors activated (7466.97 BogoMIPS) [ 0.129412] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.130116] devtmpfs: initialized [ 0.137094] EVM: security.selinux [ 0.137098] EVM: security.SMACK64 [ 0.137100] EVM: security.ima [ 0.137102] EVM: security.capability [ 0.137210] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.137214] PM: Registering ACPI NVS region [mem 0xb7ed3000-0xb83c7fff] (5197824 bytes) [ 0.139231] pinctrl core: initialized pinctrl subsystem [ 0.139381] regulator-dummy: no parameters [ 0.139422] RTC time: 2:50:46, date: 03/01/15 [ 0.139501] NET: Registered protocol family 16 [ 0.139746] cpuidle: using governor ladder [ 0.139750] cpuidle: using governor menu [ 0.139860] ACPI: bus type PCI registered [ 0.139865] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.139972] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.139977] PCI: not using MMCONFIG [ 0.139980] PCI: Using configuration type 1 for base access [ 0.141988] bio: create slab at 0 [ 0.142350] ACPI: Added _OSI(Module Device) [ 0.142354] ACPI: Added _OSI(Processor Device) [ 0.142357] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.142360] ACPI: Added _OSI(Processor Aggregator Device) [ 0.147198] ACPI : EC: EC description table is found, configuring boot EC [ 0.163550] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.174585] ACPI: SSDT 00000000b7d7da18 00045B (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.175787] ACPI: Dynamic OEM Table Load: [ 0.175792] ACPI: SSDT (null) 00045B (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.176015] ACPI: SSDT 00000000b7d7c918 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.177190] ACPI: Dynamic OEM Table Load: [ 0.177195] ACPI: SSDT (null) 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.183707] ACPI: SSDT 00000000b7d7ee18 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.184927] ACPI: Dynamic OEM Table Load: [ 0.184932] ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.187375] ACPI: SSDT 00000000b7d7ff18 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.188556] ACPI: Dynamic OEM Table Load: [ 0.188561] ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.192043] ACPI: Interpreter enabled [ 0.192058] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.192068] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.192096] ACPI: (supports S0 S3 S4 S5) [ 0.192100] ACPI: Using IOAPIC for interrupt routing [ 0.192148] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.193231] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.225888] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.226392] ACPI: No dock devices found. [ 0.241466] ACPI: Power Resource [USBC] (on) [ 0.248547] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.248559] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.248650] \_SB_.PCI0:_OSC invalid UUID [ 0.248654] _OSC request data:1 1f 0 [ 0.248662] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.249662] PCI host bridge to bus 0000:00 [ 0.249669] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.249674] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.249678] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.249682] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.249686] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.249690] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.249695] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.249699] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0815ffe] [ 0.249712] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.249906] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.249925] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff] [ 0.249939] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref] [ 0.249953] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087] [ 0.250165] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.250190] pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077] [ 0.250202] pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063] [ 0.250214] pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057] [ 0.250226] pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043] [ 0.250238] pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f] [ 0.250250] pci 0000:00:13.0: reg 0x24: [mem 0xd0815000-0xd08157ff] [ 0.250303] pci 0000:00:13.0: PME# supported from D3hot [ 0.250470] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.250494] pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit] [ 0.250562] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.250704] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.250781] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.250812] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff] [ 0.250828] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff] [ 0.250940] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.251110] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.251138] pci 0000:00:1b.0: reg 0x10: [mem 0xd0810000-0xd0813fff 64bit] [ 0.251218] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.251391] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.251462] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.251580] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.251639] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.251709] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.251826] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.251890] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.251960] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.252081] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.252147] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.252386] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.252426] pci 0000:00:1f.3: reg 0x10: [mem 0xd0814000-0xd081401f] [ 0.252502] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.252843] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.252992] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000 [ 0.253021] pci 0000:02:00.0: reg 0x10: [mem 0xd0700000-0xd077ffff 64bit] [ 0.253077] pci 0000:02:00.0: reg 0x30: [mem 0xd0780000-0xd078ffff pref] [ 0.253137] pci 0000:02:00.0: supports D1 D2 [ 0.253141] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.253194] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.259366] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.259376] pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd07fffff] [ 0.259523] pci 0000:03:00.0: [10ec:5286] type 00 class 0xff0000 [ 0.259545] pci 0000:03:00.0: reg 0x10: [mem 0xd0600000-0xd060ffff] [ 0.259677] pci 0000:03:00.0: supports D1 D2 [ 0.259681] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.259742] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.259815] pci 0000:03:00.2: [10ec:8136] type 00 class 0x020000 [ 0.259837] pci 0000:03:00.2: reg 0x10: [io 0xe000-0xe0ff] [ 0.259869] pci 0000:03:00.2: reg 0x18: [mem 0xd0614000-0xd0614fff 64bit pref] [ 0.259890] pci 0000:03:00.2: reg 0x20: [mem 0xd0610000-0xd0613fff 64bit pref] [ 0.259970] pci 0000:03:00.2: supports D1 D2 [ 0.259974] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.267384] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.267392] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.267398] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff] [ 0.268668] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.268808] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.268943] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.269083] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.269218] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.269353] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.269489] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.269624] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.272574] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.272590] ACPI: \_SB_.PCI0: notify handler is installed [ 0.272745] Found 1 acpi root devices [ 0.272917] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.273146] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.273151] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.273157] vgaarb: loaded [ 0.273159] vgaarb: bridge control possible 0000:00:02.0 [ 0.273520] SCSI subsystem initialized [ 0.273623] libata version 3.00 loaded. [ 0.273663] ACPI: bus type USB registered [ 0.273704] usbcore: registered new interface driver usbfs [ 0.273722] usbcore: registered new interface driver hub [ 0.273783] usbcore: registered new device driver usb [ 0.274036] PCI: Using ACPI for IRQ routing [ 0.280635] PCI: pci_cache_line_size set to 64 bytes [ 0.280691] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.280695] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.280698] e820: reserve RAM buffer [mem 0xb7d56000-0xb7ffffff] [ 0.280701] e820: reserve RAM buffer [mem 0xb7ed3000-0xb7ffffff] [ 0.280704] e820: reserve RAM buffer [mem 0xb8d77000-0xbbffffff] [ 0.280707] e820: reserve RAM buffer [mem 0xb9000000-0xbbffffff] [ 0.280865] NetLabel: Initializing [ 0.280869] NetLabel: domain hash size = 128 [ 0.280871] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.280893] NetLabel: unlabeled traffic allowed by default [ 0.281017] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.281025] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.283089] Switched to clocksource hpet [ 0.292682] AppArmor: AppArmor Filesystem Enabled [ 0.292740] pnp: PnP ACPI init [ 0.292764] ACPI: bus type PNP registered [ 0.292865] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.292984] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.293196] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.293300] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.293306] system 00:03: [io 0x0400-0x047f] has been reserved [ 0.293311] system 00:03: [io 0x0500-0x05fe] has been reserved [ 0.293316] system 00:03: [io 0x0600-0x061f] has been reserved [ 0.293320] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.293327] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293451] system 00:04: [io 0x03f8-0x0411] could not be reserved [ 0.293459] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293611] pnp 00:05: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) [ 0.293706] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active) [ 0.294167] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.294173] system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.294178] system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.294183] system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.294188] system 00:07: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.294192] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.294197] system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.294202] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.294206] system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.294213] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.296625] pnp 00:08: Plug and Play ACPI device, IDs INT33bd (active) [ 0.296731] pnp: PnP ACPI: found 9 devices [ 0.296735] ACPI: bus type PNP unregistered [ 0.305459] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.305469] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.305474] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.305485] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.305491] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.305503] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.305515] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.305520] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.305525] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.305530] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.305534] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.305539] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.305548] pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000) [ 0.305559] pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000) [ 0.305566] pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000) [ 0.305572] pci 0000:00:1c.3: BAR 15: can't assign mem pref (size 0x200000) [ 0.305579] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.305585] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 0.305593] pci 0000:00:1c.3: BAR 15: can't assign mem pref (size 0x200000) [ 0.305600] pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000) [ 0.305606] pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000) [ 0.305612] pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000) [ 0.305617] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.305622] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.305635] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.305640] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.305647] pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd07fffff] [ 0.305657] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.305662] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.305668] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff] [ 0.305679] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 0.305683] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 0.305687] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 0.305691] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.305696] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 0.305700] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 0.305704] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd0815ffe] [ 0.305709] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.305713] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.305717] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff] [ 0.305721] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.305726] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff] [ 0.305783] NET: Registered protocol family 2 [ 0.306203] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.306365] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.306535] TCP: Hash tables configured (established 32768 bind 32768) [ 0.306591] TCP: reno registered [ 0.306609] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.306654] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.306809] NET: Registered protocol family 1 [ 0.306838] pci 0000:00:02.0: Video device with shadowed ROM [ 0.307222] PCI: CLS 64 bytes, default 64 [ 0.307365] Trying to unpack rootfs image as initramfs... [ 0.839586] Freeing initrd memory: 18896K (ffff880035b08000 - ffff880036d7c000) [ 0.839597] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.839602] software IO TLB [mem 0xa5b0a000-0xa9b0a000] (64MB) mapped at [ffff8800a5b0a000-ffff8800a9b09fff] [ 0.839923] microcode: CPU0 sig=0x30673, pf=0x8, revision=0x31e [ 0.839945] microcode: CPU1 sig=0x30673, pf=0x8, revision=0x31e [ 0.840051] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.840055] Scanning for low memory corruption every 60 seconds [ 0.840533] Initialise system trusted keyring [ 0.840621] audit: initializing netlink socket (disabled) [ 0.840640] type=2000 audit(1425178246.840:1): initialized [ 0.889222] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.891641] zbud: loaded [ 0.891898] VFS: Disk quotas dquot_6.5.2 [ 0.891985] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.892927] fuse init (API version 7.22) [ 0.893078] msgmni has been set to 7644 [ 0.893183] Key type big_key registered [ 0.893893] Key type asymmetric registered [ 0.893897] Asymmetric key parser 'x509' registered [ 0.893962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.894033] io scheduler noop registered [ 0.894038] io scheduler deadline registered (default) [ 0.894093] io scheduler cfq registered [ 0.894757] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.894786] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.894871] efifb: probing for efifb [ 0.895195] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 1920k, total 1920k [ 0.895199] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 0.895201] efifb: scrolling: redraw [ 0.895205] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.898683] Console: switching to colour frame buffer device 100x37 [ 0.901986] fb0: EFI VGA frame buffer device [ 0.902026] intel_idle: does not run on family 6 model 55 [ 0.902040] ipmi message handler version 39.2 [ 0.907664] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.907764] ACPI: AC Adapter [AC0] (on-line) [ 0.907961] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.907970] ACPI: Power Button [PWRB] [ 0.908047] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.909079] ACPI: Lid Switch [LID] [ 0.909150] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.909158] ACPI: Sleep Button [SLPB] [ 0.909223] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.909229] ACPI: Power Button [PWRF] [ 0.911707] Monitor-Mwait will be used to enter C-1 state [ 0.911718] Monitor-Mwait will be used to enter C-2 state [ 0.911746] ACPI: acpi_idle registered with cpuidle [ 0.914183] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.914188] ACPI: Thermal Zone [THRM] (0 C) [ 0.914239] GHES: HEST is not enabled! [ 0.914727] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.935184] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.940204] Linux agpgart interface v0.103 [ 0.945637] brd: module loaded [ 0.948509] loop: module loaded [ 0.949861] libphy: Fixed MDIO Bus: probed [ 0.950256] tun: Universal TUN/TAP device driver, 1.6 [ 0.950269] tun: (C) 1999-2004 Max Krasnyansky [ 0.950469] PPP generic driver version 2.4.2 [ 0.950683] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.950710] ehci-pci: EHCI PCI platform driver [ 0.950735] ehci-platform: EHCI generic platform driver [ 0.950752] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.950756] ohci-pci: OHCI PCI platform driver [ 0.950771] ohci-platform: OHCI generic platform driver [ 0.950844] uhci_hcd: USB Universal Host Controller Interface driver [ 0.951438] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.951450] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.951796] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.951881] xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X [ 0.952178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.952183] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.952187] usb usb1: Product: xHCI Host Controller [ 0.952191] usb usb1: Manufacturer: Linux 3.13.0-46-generic xhci_hcd [ 0.952195] usb usb1: SerialNumber: 0000:00:14.0 [ 0.952556] hub 1-0:1.0: USB hub found [ 0.952576] hub 1-0:1.0: 6 ports detected [ 0.954610] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.954623] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.954700] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.954705] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.954709] usb usb2: Product: xHCI Host Controller [ 0.954713] usb usb2: Manufacturer: Linux 3.13.0-46-generic xhci_hcd [ 0.954717] usb usb2: SerialNumber: 0000:00:14.0 [ 0.954904] hub 2-0:1.0: USB hub found [ 0.954921] hub 2-0:1.0: 1 port detected [ 0.963765] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.971843] i8042: Detected active multiplexing controller, rev 1.1 [ 1.003434] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.003447] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.003501] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.003541] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.003584] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.004676] mousedev: PS/2 mouse device common for all mice [ 1.005899] rtc_cmos 00:00: RTC can wake from S4 [ 1.006059] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.006095] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.006235] device-mapper: uevent: version 1.0.3 [ 1.006358] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.006369] ledtrig-cpu: registered to indicate activity on CPUs [ 1.006373] EFI Variables Facility v0.08 2004-May-17 [ 1.006824] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.006835] ACPI: Battery Slot [BAT0] (battery present) [ 1.007031] efivars: duplicate variable: AcpiGlobalVariable-c020489e-6db2-4ef2-9aa5-ca06fc11d36a [ 1.007211] TCP: cubic registered [ 1.007391] NET: Registered protocol family 10 [ 1.007757] NET: Registered protocol family 17 [ 1.007782] Key type dns_resolver registered [ 1.008210] Loading compiled-in X.509 certificates [ 1.010244] Loaded X.509 cert 'Magrathea: Glacier signing key: 033857537cde7bd54c0be6290c13efad5b068cdc' [ 1.010268] registered taskstats version 1 [ 1.014954] Key type trusted registered [ 1.023229] Key type encrypted registered [ 1.023239] AppArmor: AppArmor sha1 policy hashing enabled [ 1.023243] IMA: No TPM chip found, activating TPM-bypass! [ 1.023614] regulator-dummy: disabling [ 1.023711] Magic number: 7:52:813 [ 1.023768] pci 0000:00:1a.0: hash matches [ 1.023844] rtc_cmos 00:00: setting system clock to 2015-03-01 02:50:47 UTC (1425178247) [ 1.024697] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.024701] EDD information not available. [ 1.024782] PM: Hibernation image not present or could not be loaded. [ 1.026757] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 1.026763] Write protecting the kernel read-only data: 12288k [ 1.031005] Freeing unused kernel memory: 796K (ffff880002739000 - ffff880002800000) [ 1.034440] Freeing unused kernel memory: 688K (ffff880002b54000 - ffff880002c00000) [ 1.047611] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.055715] systemd-udevd[99]: starting version 204 [ 1.103443] ahci 0000:00:13.0: version 3.0 [ 1.103667] ahci 0000:00:13.0: irq 104 for MSI/MSI-X [ 1.115790] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.115799] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds [ 1.116811] scsi0 : ahci [ 1.116962] scsi1 : ahci [ 1.117038] ata1: SATA max UDMA/133 abar m2048@0xd0815000 port 0xd0815100 irq 104 [ 1.117043] ata2: SATA max UDMA/133 abar m2048@0xd0815000 port 0xd0815180 irq 104 [ 1.123589] rtsx_pci 0000:03:00.0: irq 105 for MSI/MSI-X [ 1.123610] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 105 [ 1.126139] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.126160] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control [ 1.126462] r8169 0000:03:00.2: irq 106 for MSI/MSI-X [ 1.126754] r8169 0000:03:00.2 eth0: RTL8402 at 0xffffc90000638000, 40:16:7e:48:46:31, XID 04000800 IRQ 106 [ 1.163974] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.180699] usb 2-1: New USB device found, idVendor=1058, idProduct=10b8 [ 1.180706] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 1.180710] usb 2-1: Product: Elements 10B8 [ 1.180713] usb 2-1: Manufacturer: Western Digital [ 1.180716] usb 2-1: SerialNumber: 575835314142333030393735 [ 1.206025] usb-storage 2-1:1.0: USB Mass Storage device detected [ 1.206169] scsi2 : usb-storage 2-1:1.0 [ 1.206611] usbcore: registered new interface driver usb-storage [ 1.348781] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 1.397127] usb 1-4: New USB device found, idVendor=04f2, idProduct=b404 [ 1.397133] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.397137] usb 1-4: Product: USB2.0 HD UVC WebCam [ 1.397141] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd. [ 1.397145] usb 1-4: SerialNumber: 0x0001 [ 1.444023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.448114] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8E1, 1.00, max UDMA/100 [ 1.453757] ata2.00: configured for UDMA/100 [ 1.660332] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.660617] ata1.00: ATA-8: OCZ-VERTEX450, 1.0, max UDMA/133 [ 1.660622] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.664946] ata1.00: configured for UDMA/133 [ 1.665337] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX450 1.0 PQ: 0 ANSI: 5 [ 1.665623] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.666021] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.666465] sd 0:0:0:0: [sda] Write Protect is off [ 1.666472] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.666608] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.667811] sda: sda1 sda2 sda3 sda4 < sda5 > [ 1.668085] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8E1 1.00 PQ: 0 ANSI: 5 [ 1.668674] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.674751] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.674755] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.674937] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.675043] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.784877] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381f05) [ 1.799033] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e. [ 1.840336] tsc: Refined TSC clocksource calibration: 1866.666 MHz [ 1.875766] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12 [ 2.205220] scsi 2:0:0:0: Direct-Access WD Elements 10B8 1007 PQ: 0 ANSI: 6 [ 2.205827] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.205869] sd 2:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.206200] sd 2:0:0:0: [sdb] Write Protect is off [ 2.206206] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 2.206582] sd 2:0:0:0: [sdb] No Caching mode page found [ 2.206588] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 2.208211] sd 2:0:0:0: [sdb] No Caching mode page found [ 2.208217] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 2.208461] sdb: sdb1 [ 2.211995] sd 2:0:0:0: [sdb] No Caching mode page found [ 2.212002] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 2.212007] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.841649] Switched to clocksource tsc [ 3.449573] mmc0: error -110 whilst initialising SD card [ 5.795406] mmc0: error -110 whilst initialising SD card [ 6.723375] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 6.723382] EXT4-fs (sda1): write access will be enabled during recovery [ 6.998261] EXT4-fs (sda1): orphan cleanup on readonly fs [ 6.998699] EXT4-fs (sda1): 15 orphan inodes deleted [ 6.998703] EXT4-fs (sda1): recovery complete [ 7.026897] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.138796] random: init urandom read with 123 bits of entropy available [ 7.227577] random: nonblocking pool is initialized [ 7.421975] efivars: duplicate variable: AcpiGlobalVariable-c020489e-6db2-4ef2-9aa5-ca06fc11d36a [ 7.495695] Adding 8181756k swap on /dev/sda5. Priority:-1 extents:1 across:8181756k SSFS [ 7.558317] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.737617] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 7.742000] systemd-udevd[297]: starting version 204 [ 7.942699] lp: driver loaded but no devices found [ 8.003712] ppdev: user-space parallel port driver [ 8.156324] mmc0: error -110 whilst initialising SD card [ 8.454380] [drm] Initialized drm 1.1.0 20060810 [ 8.461830] wmi: Mapper loaded [ 8.485068] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.583368] systemd-udevd[359]: renamed network interface eth0 to eth1 [ 8.610910] cfg80211: Calling CRDA to update world regulatory domain [ 8.701013] [drm] Memory usable by graphics device = 2048M [ 8.701023] checking generic (c0000000 1e0000) vs hw (c0000000 10000000) [ 8.701027] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver [ 8.701057] Console: switching to colour dummy device 80x25 [ 8.825299] ath: phy0: Disable PLL PowerSave [ 8.829330] i915 0000:00:02.0: irq 107 for MSI/MSI-X [ 8.829347] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.829350] [drm] Driver supports precise vblank timestamp query. [ 8.836785] ath: phy0: Enable LNA combining [ 8.837904] ath: phy0: ASPM enabled: 0x42 [ 8.837909] ath: EEPROM regdomain: 0x60 [ 8.837911] ath: EEPROM indicates we should expect a direct regpair map [ 8.837915] ath: Country alpha2 being used: 00 [ 8.837917] ath: Regpair used: 0x60 [ 8.868632] type=1400 audit(1425178255.333:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=445 comm="apparmor_parser" [ 8.868648] type=1400 audit(1425178255.333:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=445 comm="apparmor_parser" [ 8.868657] type=1400 audit(1425178255.333:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=445 comm="apparmor_parser" [ 8.869736] type=1400 audit(1425178255.333:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=445 comm="apparmor_parser" [ 8.869752] type=1400 audit(1425178255.333:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=445 comm="apparmor_parser" [ 8.876543] type=1400 audit(1425178255.341:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=445 comm="apparmor_parser" [ 8.922861] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.923478] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010800000, irq=17 [ 9.235619] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.364320] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 10.208779] init: Failed to spawn connman main process: unable to execute: No such file or directory [ 10.227906] init: samba-ad-dc main process (618) terminated with status 1 [ 10.277842] asus_wmi: ASUS WMI generic driver loaded [ 10.307289] asus_wmi: Initialization: 0x1 [ 10.307369] asus_wmi: BIOS WMI version: 7.9 [ 10.307461] asus_wmi: SFUN value: 0x4a0877 [ 10.351454] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input13 [ 10.420802] asus_wmi: Backlight controlled by ACPI video driver [ 10.467466] systemd-udevd[342]: renamed network interface wlan0 to wlan1 [ 10.469313] cfg80211: World regulatory domain updated: [ 10.469321] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.469324] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.469327] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.469330] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.469333] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.469336] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.493590] init: failsafe main process (570) killed by TERM signal [ 10.571642] Bluetooth: Core ver 2.17 [ 10.571710] NET: Registered protocol family 31 [ 10.571714] Bluetooth: HCI device and connection manager initialized [ 10.571727] Bluetooth: HCI socket layer initialized [ 10.571732] Bluetooth: L2CAP socket layer initialized [ 10.571741] Bluetooth: SCO socket layer initialized [ 10.600082] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.600088] Bluetooth: BNEP filters: protocol multicast [ 10.600102] Bluetooth: BNEP socket layer initialized [ 10.781126] Linux video capture interface: v2.00 [ 10.899646] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b404) [ 10.900879] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input14 [ 10.901270] usbcore: registered new interface driver uvcvideo [ 10.901276] USB Video Class driver (1.1.1) [ 10.992327] Bluetooth: RFCOMM TTY layer initialized [ 10.992349] Bluetooth: RFCOMM socket layer initialized [ 10.992365] Bluetooth: RFCOMM ver 1.11 [ 11.235602] type=1400 audit(1425178257.697:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=788 comm="apparmor_parser" [ 11.235619] type=1400 audit(1425178257.697:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=788 comm="apparmor_parser" [ 11.240832] type=1400 audit(1425178257.705:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=788 comm="apparmor_parser" [ 11.575823] init: cups main process (792) killed by HUP signal [ 11.575850] init: cups main process ended, respawning [ 12.002692] type=1400 audit(1425178258.465:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=862 comm="apparmor_parser" [ 12.732417] fbcon: inteldrmfb (fb0) is primary device [ 12.816947] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 12.980489] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 12.984178] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 13.079331] r8169 0000:03:00.2 eth1: link down [ 13.079442] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.080739] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.507217] Console: switching to colour frame buffer device 170x48 [ 15.513842] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 15.513844] i915 0000:00:02.0: registered panic notifier [ 15.525493] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 15.536436] acpi device:0a: registered as cooling_device2 [ 15.555116] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15 [ 15.562080] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 15.562363] snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X [ 15.742385] SKU: Nid=0x1d sku_cfg=0x40479a2d [ 15.742390] SKU: port_connectivity=0x1 [ 15.742393] SKU: enable_pcbeep=0x0 [ 15.742395] SKU: check_sum=0x00000007 [ 15.742397] SKU: customization=0x0000009a [ 15.742398] SKU: external_amp=0x5 [ 15.742400] SKU: platform_type=0x1 [ 15.742402] SKU: swap=0x0 [ 15.742404] SKU: override=0x1 [ 15.742995] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.742998] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.743001] hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 15.743003] mono: mono_out=0x0 [ 15.743004] inputs: [ 15.743007] Mic=0x19 [ 15.743010] realtek: No valid SSID, checking pincfg 0x40479a2d for NID 0x1d [ 15.743012] realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0270 [ 15.821767] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 15.822853] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 16.720018] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 17.581389] audit_printk_skb: 153 callbacks suppressed [ 17.581397] type=1400 audit(1425178264.041:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1261 comm="apparmor_parser" [ 17.726119] type=1400 audit(1425178264.185:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/mysqld" pid=1270 comm="apparmor_parser" [ 17.748965] init: mdm main process (1144) killed by TERM signal [ 17.753350] init: gdm main process (1234) killed by TERM signal [ 18.140008] Non-volatile memory driver v1.3 [ 18.300871] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 18.307759] vboxdrv: Found 2 processor cores. [ 18.313280] vboxdrv: fAsync=0 offMin=0x310 offMax=0x1696 [ 18.313438] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 18.313438] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). [ 18.351300] vboxpci: IOMMU not found (not registered) [ 19.842563] init: plymouth-upstart-bridge main process ended, respawning [ 19.860413] init: plymouth-upstart-bridge main process (1744) terminated with status 1 [ 19.860444] init: plymouth-upstart-bridge main process ended, respawning [ 20.783173] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 20.783210] usb 1-2: Device not responding to set address. [ 20.983282] [drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit [ 20.987332] usb 1-2: Device not responding to set address. [ 21.191462] usb 1-2: device not accepting address 3, error -71 [ 41.789895] type=1400 audit(1425178288.229:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2227 comm="apparmor_parser" [ 41.789914] type=1400 audit(1425178288.229:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2227 comm="apparmor_parser" [ 41.791172] type=1400 audit(1425178288.229:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2227 comm="apparmor_parser" [ 57.452313] usb 1-2: new high-speed USB device number 46 using xhci_hcd [ 57.452449] usb 1-2: Device not responding to set address. [ 57.656465] usb 1-2: Device not responding to set address. [ 57.860535] usb 1-2: device not accepting address 46, error -71 [ 73.800808] usb 1-2: new high-speed USB device number 120 using xhci_hcd [ 73.800846] usb 1-2: Device not responding to set address. [ 74.005346] usb 1-2: Device not responding to set address. [ 74.208953] usb 1-2: device not accepting address 120, error -71 [ 85.033272] [drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit [ 98.684244] systemd-hostnamed[3011]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 182.345254] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 183.469622] ip_tables: (C) 2000-2006 Netfilter Core Team [ 183.484538] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 907.503852] usb 2-1: USB disconnect, device number 2 [ 911.006395] hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 1875.023526] type=1400 audit(1425180120.033:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=19059 comm="apparmor_parser" [ 1875.023545] type=1400 audit(1425180120.033:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=19059 comm="apparmor_parser" [ 1875.024651] type=1400 audit(1425180120.033:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=19059 comm="apparmor_parser" [ 3751.690888] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd [ 3751.707412] usb 2-1: New USB device found, idVendor=1058, idProduct=10b8 [ 3751.707435] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 3751.707450] usb 2-1: Product: Elements 10B8 [ 3751.707464] usb 2-1: Manufacturer: Western Digital [ 3751.707478] usb 2-1: SerialNumber: 575835314142333030393735 [ 3751.712449] usb-storage 2-1:1.0: USB Mass Storage device detected [ 3751.712762] scsi3 : usb-storage 2-1:1.0 [ 3752.711860] scsi 3:0:0:0: Direct-Access WD Elements 10B8 1007 PQ: 0 ANSI: 6 [ 3752.713612] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 3752.716772] sd 3:0:0:0: [sdb] Spinning up disk... [ 3753.719940] ......ready [ 3758.748168] sd 3:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [ 3758.748593] sd 3:0:0:0: [sdb] Write Protect is off [ 3758.748615] sd 3:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 3758.749016] sd 3:0:0:0: [sdb] No Caching mode page found [ 3758.749036] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 3758.750826] sd 3:0:0:0: [sdb] No Caching mode page found [ 3758.750851] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 3758.814752] sdb: sdb1 [ 3758.816491] sd 3:0:0:0: [sdb] No Caching mode page found [ 3758.816499] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 3758.816505] sd 3:0:0:0: [sdb] Attached SCSI disk [ 8309.078519] usb 2-1: USB disconnect, device number 3 [ 8309.334195] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd [ 8309.350925] usb 2-1: New USB device found, idVendor=1058, idProduct=10b8 [ 8309.350932] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 8309.350936] usb 2-1: Product: Elements 10B8 [ 8309.350939] usb 2-1: Manufacturer: Western Digital [ 8309.350943] usb 2-1: SerialNumber: 575835314142333030393735 [ 8309.352466] usb-storage 2-1:1.0: USB Mass Storage device detected [ 8309.354379] scsi4 : usb-storage 2-1:1.0 [ 8310.355979] scsi 4:0:0:0: Direct-Access WD Elements 10B8 1007 PQ: 0 ANSI: 6 [ 8310.357672] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 8310.361727] sd 4:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [ 8310.362047] sd 4:0:0:0: [sdb] Write Protect is off [ 8310.362060] sd 4:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 8310.362352] sd 4:0:0:0: [sdb] No Caching mode page found [ 8310.362364] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8310.363963] sd 4:0:0:0: [sdb] No Caching mode page found [ 8310.363977] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8310.834396] sdb: sdb1 [ 8310.865333] sd 4:0:0:0: [sdb] No Caching mode page found [ 8310.865342] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8310.865348] sd 4:0:0:0: [sdb] Attached SCSI disk [ 8390.638238] usb 2-1: USB disconnect, device number 4 [ 8390.889816] usb 2-1: new SuperSpeed USB device number 5 using xhci_hcd [ 8390.906538] usb 2-1: New USB device found, idVendor=1058, idProduct=10b8 [ 8390.906545] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 8390.906549] usb 2-1: Product: Elements 10B8 [ 8390.906552] usb 2-1: Manufacturer: Western Digital [ 8390.906556] usb 2-1: SerialNumber: 575835314142333030393735 [ 8390.907683] usb-storage 2-1:1.0: USB Mass Storage device detected [ 8390.907796] scsi5 : usb-storage 2-1:1.0 [ 8391.907483] scsi 5:0:0:0: Direct-Access WD Elements 10B8 1007 PQ: 0 ANSI: 6 [ 8391.909014] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 8391.909891] sd 5:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [ 8391.910276] sd 5:0:0:0: [sdb] Write Protect is off [ 8391.910298] sd 5:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 8391.910752] sd 5:0:0:0: [sdb] No Caching mode page found [ 8391.910778] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 8391.912590] sd 5:0:0:0: [sdb] No Caching mode page found [ 8391.912612] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 8391.913102] sdb: sdb1 [ 8391.915020] sd 5:0:0:0: [sdb] No Caching mode page found [ 8391.915031] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 8391.915039] sd 5:0:0:0: [sdb] Attached SCSI disk [ 8515.631417] usb 2-1: USB disconnect, device number 5 [ 8515.883501] usb 2-1: new SuperSpeed USB device number 6 using xhci_hcd [ 8515.900097] usb 2-1: New USB device found, idVendor=1058, idProduct=10b8 [ 8515.900106] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 8515.900111] usb 2-1: Product: Elements 10B8 [ 8515.900115] usb 2-1: Manufacturer: Western Digital [ 8515.900119] usb 2-1: SerialNumber: 575835314142333030393735 [ 8515.901938] usb-storage 2-1:1.0: USB Mass Storage device detected [ 8515.902069] scsi6 : usb-storage 2-1:1.0 [ 8516.900958] scsi 6:0:0:0: Direct-Access WD Elements 10B8 1007 PQ: 0 ANSI: 6 [ 8516.903036] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 8516.905275] sd 6:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [ 8516.905663] sd 6:0:0:0: [sdb] Write Protect is off [ 8516.905685] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 8516.906058] sd 6:0:0:0: [sdb] No Caching mode page found [ 8516.906078] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 8516.908436] sd 6:0:0:0: [sdb] No Caching mode page found [ 8516.908448] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 8516.909765] sdb: sdb1 [ 8516.910867] sd 6:0:0:0: [sdb] No Caching mode page found [ 8516.910876] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 8516.910882] sd 6:0:0:0: [sdb] Attached SCSI disk [ 9015.188965] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [ 9015.311826] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 9017.959182] usb 2-1: USB disconnect, device number 6 [ 9018.207302] usb 2-1: new SuperSpeed USB device number 7 using xhci_hcd [ 9018.227427] usb 2-1: New USB device found, idVendor=1058, idProduct=10b8 [ 9018.227434] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 9018.227439] usb 2-1: Product: Elements 10B8 [ 9018.227442] usb 2-1: Manufacturer: Western Digital [ 9018.227446] usb 2-1: SerialNumber: 575835314142333030393735 [ 9018.229269] usb-storage 2-1:1.0: USB Mass Storage device detected [ 9018.235215] scsi7 : usb-storage 2-1:1.0 [ 9018.943793] usb 2-1: USB disconnect, device number 7 [ 9019.192204] usb 2-1: new SuperSpeed USB device number 8 using xhci_hcd [ 9019.209067] usb 2-1: New USB device found, idVendor=1058, idProduct=10b8 [ 9019.209075] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 9019.209079] usb 2-1: Product: Elements 10B8 [ 9019.209082] usb 2-1: Manufacturer: Western Digital [ 9019.209085] usb 2-1: SerialNumber: 575835314142333030393735 [ 9019.214595] usb 2-1: Disable of device-initiated U1 failed. [ 9019.214714] usb-storage 2-1:1.0: USB Mass Storage device detected [ 9019.215203] scsi8 : usb-storage 2-1:1.0 [ 9019.564296] usb 2-1: USB disconnect, device number 8 [ 9019.804599] usb 2-1: new SuperSpeed USB device number 9 using xhci_hcd [ 9019.826267] usb 2-1: New USB device found, idVendor=1058, idProduct=10b8 [ 9019.826276] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 9019.826280] usb 2-1: Product: Elements 10B8 [ 9019.826283] usb 2-1: Manufacturer: Western Digital [ 9019.826286] usb 2-1: SerialNumber: 575835314142333030393735 [ 9019.827625] usb-storage 2-1:1.0: USB Mass Storage device detected [ 9019.832502] scsi9 : usb-storage 2-1:1.0 [ 9020.630803] init: anacron main process (22977) killed by TERM signal [ 9020.701232] usb 2-1: USB disconnect, device number 9 [ 9020.863064] PM: Syncing filesystems ... done. [ 9020.920205] PM: Preparing system for mem sleep [ 9020.945656] usb 2-1: new SuperSpeed USB device number 10 using xhci_hcd [ 9020.962967] usb 2-1: New USB device found, idVendor=1058, idProduct=10b8 [ 9020.962973] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 9020.962978] usb 2-1: Product: Elements 10B8 [ 9020.962981] usb 2-1: Manufacturer: Western Digital [ 9020.962985] usb 2-1: SerialNumber: 575835314142333030393735 [ 9020.964410] usb-storage 2-1:1.0: USB Mass Storage device detected [ 9020.964541] scsi10 : usb-storage 2-1:1.0 [ 9021.962957] scsi 10:0:0:0: Direct-Access WD Elements 10B8 1007 PQ: 0 ANSI: 6 [ 9021.963415] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 9021.963756] sd 10:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [ 9021.964040] sd 10:0:0:0: [sdb] Write Protect is off [ 9021.964047] sd 10:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 9021.964291] sd 10:0:0:0: [sdb] No Caching mode page found [ 9021.964298] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 9021.965233] sd 10:0:0:0: [sdb] No Caching mode page found [ 9021.965238] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 9021.965474] sdb: sdb1 [ 9021.966500] sd 10:0:0:0: [sdb] No Caching mode page found [ 9021.966505] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 9021.966510] sd 10:0:0:0: [sdb] Attached SCSI disk [ 9020.920410] Freezing user space processes ... (elapsed 1.147 seconds) done. [ 9022.068499] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9022.069950] PM: Entering mem sleep [ 9022.070480] Suspending console(s) (use no_console_suspend to debug) [ 9022.070904] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9022.075168] sd 0:0:0:0: [sda] Stopping disk [ 9022.602836] PM: suspend of devices complete after 531.691 msecs [ 9022.618810] PM: late suspend of devices complete after 15.956 msecs [ 9022.650998] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 9022.666659] PM: noirq suspend of devices complete after 47.807 msecs [ 9022.666702] ACPI: Preparing to enter system sleep state S3 [ 9022.669192] PM: Saving platform NVS memory [ 9022.676952] Disabling non-boot CPUs ... [ 9022.678407] kvm: disabling virtualization on CPU1 [ 9022.778727] smpboot: CPU 1 is now offline [ 9022.779764] ACPI: Low-level resume complete [ 9022.779837] PM: Restoring platform NVS memory [ 9022.783234] Enabling non-boot CPUs ... [ 9022.783304] x86: Booting SMP configuration: [ 9022.783306] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 9022.800138] kvm: enabling virtualization on CPU1 [ 9022.802779] CPU1 is up [ 9022.804797] ACPI: Waking up from system sleep state S3 [ 9023.018914] acpi LNXPOWER:00: Turning OFF [ 9023.067284] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 9023.131461] PM: noirq resume of devices complete after 112.442 msecs [ 9023.171451] PM: early resume of devices complete after 39.920 msecs [ 9023.171720] ath: phy0: ASPM enabled: 0x42 [ 9023.172410] snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X [ 9023.387616] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [ 9023.433337] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880036bf35c0 [ 9023.531653] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9023.605094] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [ 9023.799411] psmouse serio4: elantech: retrying ps2 command 0xf8 (2). [ 9023.949929] ata2.00: configured for UDMA/100 [ 9024.852569] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 9025.048717] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9025.052492] ata1.00: configured for UDMA/133 [ 9025.068322] sd 0:0:0:0: [sda] Starting disk [ 9026.276541] PM: resume of devices complete after 3102.660 msecs [ 9026.276958] PM: Finishing wakeup. [ 9026.276962] Restarting tasks ... done. [ 9026.309360] usb 2-1: USB disconnect, device number 10 [ 9026.424082] video LNXVIDEO:00: Restoring backlight state [ 9027.196713] init: anacron main process (23274) killed by TERM signal [ 9027.316532] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 9027.420440] r8169 0000:03:00.2 eth1: link down [ 9027.420579] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9028.679083] mmc0: error -110 whilst initialising SD card [ 9029.405542] wlan1: authenticate with 00:30:4f:4f:11:10 [ 9029.428512] wlan1: send auth to 00:30:4f:4f:11:10 (try 1/3) [ 9029.431451] wlan1: authenticated [ 9029.431775] ath9k 0000:02:00.0 wlan1: disabling HT as WMM/QoS is not supported by the AP [ 9029.431780] ath9k 0000:02:00.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP [ 9029.435670] wlan1: associate with 00:30:4f:4f:11:10 (try 1/3) [ 9029.438314] wlan1: RX AssocResp from 00:30:4f:4f:11:10 (capab=0x411 status=0 aid=2) [ 9029.439290] wlan1: associated [ 9029.439367] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 9029.832663] wlan1: deauthenticating from 00:30:4f:4f:11:10 by local choice (reason=2) [ 9029.835017] wlan1: authenticate with 00:30:4f:4f:11:10 [ 9029.845757] wlan1: send auth to 00:30:4f:4f:11:10 (try 1/3) [ 9029.845966] cfg80211: Calling CRDA to update world regulatory domain [ 9029.847795] wlan1: authenticated [ 9029.848112] ath9k 0000:02:00.0 wlan1: disabling HT as WMM/QoS is not supported by the AP [ 9029.848119] ath9k 0000:02:00.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP [ 9029.852016] wlan1: associate with 00:30:4f:4f:11:10 (try 1/3) [ 9029.854615] wlan1: RX AssocResp from 00:30:4f:4f:11:10 (capab=0x411 status=0 aid=2) [ 9029.855283] wlan1: associated [ 9029.859361] cfg80211: World regulatory domain updated: [ 9029.859371] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9029.859376] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9029.859380] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9029.859384] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9029.859389] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9029.859393] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9031.040964] mmc0: error -110 whilst initialising SD card [ 9033.394778] mmc0: error -110 whilst initialising SD card [10389.024376] cfg80211: Calling CRDA to update world regulatory domain [10389.061240] cfg80211: World regulatory domain updated: [10389.061248] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [10389.061252] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10389.061255] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10389.061258] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [10389.061261] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10389.061264] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10404.345088] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [10432.220394] wlan1: authenticate with 00:30:4f:4f:11:10 [10432.231811] wlan1: send auth to 00:30:4f:4f:11:10 (try 1/3) [10432.233955] wlan1: authenticated [10432.236303] ath9k 0000:02:00.0 wlan1: disabling HT as WMM/QoS is not supported by the AP [10432.236313] ath9k 0000:02:00.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP [10432.238421] wlan1: associate with 00:30:4f:4f:11:10 (try 1/3) [10432.241015] wlan1: RX AssocResp from 00:30:4f:4f:11:10 (capab=0x411 status=0 aid=2) [10432.241608] wlan1: associated [10432.241656] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [10947.704819] usb 1-1: new high-speed USB device number 41 using xhci_hcd [10947.704903] usb 1-1: Device not responding to set address. [10947.908790] usb 1-1: Device not responding to set address. [10948.112716] usb 1-1: device not accepting address 41, error -71 [13787.156838] init: anacron main process (29539) killed by TERM signal [13789.674296] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen [13789.674305] ata2.00: irq_stat 0x00400000, PHY RDY changed [13789.674309] ata2: SError: { PHYRdyChg CommWake } [13789.674317] sr 1:0:0:0: CDB: [13789.674320] Get event status notification: 4a 01 00 00 10 00 00 00 08 00 [13789.674336] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 11 pio 16392 in [13789.674336] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [13789.674341] ata2.00: status: { DRDY } [13789.674348] ata2: hard resetting link [13790.406359] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [13790.415851] ata2.00: configured for UDMA/100 [13790.430429] ata2: EH complete [14091.564391] type=1400 audit(1425230585.820:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=30291 comm="apparmor_parser" [14091.564408] type=1400 audit(1425230585.820:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=30291 comm="apparmor_parser" [14091.570175] type=1400 audit(1425230585.828:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=30291 comm="apparmor_parser" [16802.092989] plugin_host[1424]: segfault at 0 ip 00007feac5237490 sp 00007fff52f0a338 error 4 in libpthread-2.19.so[7feac5229000+19000]