Press any key to continue. Press any key to continue. Press any key to continue. Press `ESC' to enter the menu... 29 Press `ESC' to enter the menu... 28 Press `ESC' to enter the menu... 27 +-------------------------------------------------------------------------+||||||||||||||||||||||||+-------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line.  Ubuntu, kernel 2.6.20-16-386  Ubuntu, kernel 2.6.20-16-386 (recovery mode)  Ubuntu, kernel 2.6.20-16-generic  Ubuntu, kernel 2.6.20-16-generic (recovery mode)  Ubuntu, kernel 2.6.20-15-generic  Ubuntu, kernel 2.6.20-15-generic (recovery mode)  Ubuntu, memtest86+        Ubuntu, kernel 2.6.20-16-386  Ubuntu, kernel 2.6.20-16-386 (recovery mode)  Ubuntu, kernel 2.6.20-16-386 (recovery mode)  Ubuntu, kernel 2.6.20-16-386 Starting up ... [12567.524874] Restarting system. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press `ESC' to enter the menu... 29 Press `ESC' to enter the menu... 28 +-------------------------------------------------------------------------+||||||||||||||||||||||||+-------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line.  Ubuntu, kernel 2.6.20-16-386  Ubuntu, kernel 2.6.20-16-386 (recovery mode)  Ubuntu, kernel 2.6.20-16-generic  Ubuntu, kernel 2.6.20-16-generic (recovery mode)  Ubuntu, kernel 2.6.20-15-generic  Ubuntu, kernel 2.6.20-15-generic (recovery mode)  Ubuntu, memtest86+       Starting up ... [ 0.000000] Linux version 2.6.20-16-386 (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Thu Jun 7 20:16:13 UTC 2007 (Ubuntu 2.6.20-16.29-386) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000f1ec2 size: 000000000000e13e end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 0000000007f00000 end: 0000000008000000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 00000000ffff1ec2 size: 000000000000e13e end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f1ec2 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000008000000 (usable) [ 0.000000] BIOS-e820: 00000000ffff1ec2 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 128MB LOWMEM available. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 32768 [ 0.000000] HighMem 32768 -> 32768 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 32768 [ 0.000000] DMI not present or invalid. [ 0.000000] ACPI: Unable to locate RSDP [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 08000000:f7ff1ec2) [ 0.000000] Detected 332.923 MHz processor. [12596.894023] Built 1 zonelists. Total pages: 32512 [12596.894040] Kernel command line: root=UUID=6056db19-96d6-408b-8649-a372689d8e39 ro pnpbios=off console=tty0 console=ttyS0,57600n8 acpi=force [12596.895632] No local APIC present or hardware disabled [12596.895794] Initializing CPU#0 [12596.896172] PID hash table entries: 512 (order: 9, 2048 bytes) [12596.901115] Console: colour VGA+ 80x25 [12597.301169] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [12597.317080] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [12597.364251] Memory: 119140k/131072k available (1917k kernel code, 11396k reserved, 868k data, 328k init, 0k highmem) [12597.385494] virtual kernel memory layout: [12597.385503] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB) [12597.385513] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [12597.385523] vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB) [12597.385533] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [12597.385542] .init : 0xc03bc000 - 0xc040e000 ( 328 kB) [12597.385552] .data : 0xc02df423 - 0xc03b8434 ( 868 kB) [12597.385562] .text : 0xc0100000 - 0xc02df423 (1917 kB) [12597.474422] Checking if this processor honours the WP bit even in supervisor mode... Ok. [12597.567992] Calibrating delay using timer specific routine.. 666.74 BogoMIPS (lpj=1333496) [12597.585129] Security Framework v1.0.0 initialized [12597.594719] SELinux: Disabled at boot. [12597.602667] Mount-cache hash table entries: 512 [12597.613303] CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) [12597.627875] Compat vDSO mapped to ffffe000. [12597.636385] Remapping vsyscall page to ffffe000 [12597.645570] CPU: AMD-K6(tm) 3D processor stepping 0c [12597.655800] Checking 'hlt' instruction... OK. [12597.680252] Early unpacking initramfs... done [12600.387701] Booting paravirtualized kernel on bare hardware [12600.399680] Time: 0:39:44 Date: 06/28/107 [12600.408602] NET: Registered protocol family 16 [12600.418958] EISA bus registered [12600.428146] PCI: PCI BIOS revision 2.10 entry at 0xf6e3a, last bus=0 [12600.440984] PCI: Using configuration type 1 [12600.449452] Setting up standard PCI resources [12600.475817] ACPI: Interpreter disabled. [12600.483887] Linux Plug and Play Support v0.97 (c) Adam Belay [12600.495427] pnp: PnP ACPI: disabled [12600.502530] PnPBIOS: Disabled [12600.509316] PCI: Probing PCI hardware [12600.523022] PCI: Using IRQ router ITE [1283/e886] at 0000:00:12.0 [12600.541552] NET: Registered protocol family 8 [12600.550435] NET: Registered protocol family 20 [12600.566606] NET: Registered protocol family 2 [12600.615682] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [12600.630403] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [12600.644929] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [12600.657915] TCP: Hash tables configured (established 4096 bind 2048) [12600.670739] TCP reno registered [12600.688226] checking if image is initramfs... it is [12605.485821] Freeing initrd memory: 6747k freed [12605.499784] audit: initializing netlink socket (disabled) [12605.510893] audit(1185583189.096:1): initialized [12605.521895] VFS: Disk quotas dquot_6.5.1 [12605.530291] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [12605.544391] io scheduler noop registered [12605.552648] io scheduler anticipatory registered [12605.562390] io scheduler deadline registered [12605.571413] io scheduler cfq registered (default) [12605.583495] isapnp: Scanning for PnP cards... [12605.714315] isapnp: Card 'ESS ES1868 Plug and Play AudioDrive' [12605.726218] isapnp: 1 Plug & Play card detected total [12606.445438] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [12606.462250] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [12606.485327] mice: PS/2 mouse device common for all mice [12606.508043] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [12606.525663] input: Macintosh mouse button emulation as /class/input/input0 [12606.540630] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [12606.553557] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [12606.572540] PNP: No PS/2 controller found. Probing ports directly. [12606.837791] serio: i8042 KBD port at 0x60,0x64 irq 1 [12606.850055] EISA: Probing bus 0 at eisa.0 [12606.858441] EISA: Detected 0 cards. [12606.866326] TCP cubic registered [12606.873072] NET: Registered protocol family 1 [12606.882163] Using IPI Shortcut mode [12606.889439] Time: tsc clocksource has been installed. [12606.899734] Magic number: 15:239:659 [12606.907595] hash matches device ptyea [12606.922501] Freeing unused kernel memory: 328k freed Loading, please wait... [12606.951439] input: AT Translated Set 2 keyboard as /class/input/input1 Begin: Loading essential drivers... ... [12609.241497] Capability LSM initialized Done. Begin: Running /scripts/init-premount ... [12609.916786] thermal: Unknown symbol acpi_processor_set_thermal_limit Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. Begin: Waiting for root file system... ... [12617.667703] 8139too Fast Ethernet driver 0.9.28 [12617.677300] PCI: Found IRQ 11 for device 0000:00:0e.0 [12617.688376] eth0: RealTek RTL8139 at 0xc8828c00, 00:c0:6c:08:21:07, IRQ 9 [12617.732129] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [12618.137869] SCSI subsystem initialized [12618.467592] usbcore: registered new interface driver usbfs [12618.479074] usbcore: registered new interface driver hub [12618.490403] usbcore: registered new device driver usb [12618.514731] PCI: Found IRQ 9 for device 0000:00:12.2 [12618.524932] ohci_hcd 0000:00:12.2: OHCI Host Controller [12618.536961] ohci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [12618.552061] ohci_hcd 0000:00:12.2: irq 11, io mem 0xfedfe000 [12618.736589] usb usb1: configuration #1 chosen from 1 choice [12618.748383] hub 1-0:1.0: USB hub found [12618.756197] hub 1-0:1.0: 2 ports detected [12619.170261] usb 1-1: new low speed USB device using ohci_hcd and address 2 [12619.400205] usb 1-1: configuration #1 chosen from 1 choice [12619.637031] usbcore: registered new interface driver hiddev [12619.692745] input: Contour Design UniMouse, USB as /class/input/input2 [12619.707972] input: USB HID v1.00 Mouse [Contour Design UniMouse, USB] on usb-0000:00:12.2-1 [12619.725307] usbcore: registered new interface driver usbhid [12619.736612] drivers/usb/input/hid-core.c: v2.6:USB HID core driver Done. Check root= bootarg cat /proc/cmdline or missing modules, devices: cat /proc/modules ls /dev ALERT! /dev/disk/by-uuid/6056db19-96d6-408b-8649-a372689d8e39 does not exist. Dropping to a shell! BusyBox v1.1.3 (Debian 1:1.1.3-3ubuntu3) Built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off (initramfs) modprobe ide-generic [13800.134056] hda: FUJITSU MHK2060AT, ATA DISK drive [13801.677655] hdc: DVD-RW IDE1004, ATAPI CD/DVD-ROM drive [13802.357518] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [13802.367015] ide1 at 0x170-0x177,0x376 on irq 15 (initramfs) [13802.494130] hda: max request size: 128KiB [13802.587066] hda: 11733120 sectors (6007 MB) w/512KiB Cache, CHS=12416/15/63 [13802.601380] hda: cache flushes not supported [13802.610324] hda: hda1 hda2 hda3 [13802.771169] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [13802.784445] Uniform CD-ROM driver Revision: 3.20 (initramfs) Begin: Running /scripts/local-premount ... kinit: name_to_d[13849.914390] Attempting manual resume ev_t(/dev/hda2) = hda2(3,2) kinit: trying to resume from /dev/hda2 kinit: No resume image, doing normal boot... Done. [13850.334617] kjournald starting. Commit interval 5 seconds [13850.345875] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. * Reading files needed to boot...  [ OK ] * Setting preliminary keymap...  [ OK ] * Preparing restricted drivers...  [ OK ] * Starting basic networking...  [ OK ] * Starting kernel event manager...  [ OK ] * Loading hardware drivers...  [13887.132193] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [13889.130632] NET: Registered protocol family 17 [ OK ] * Loading kernel modules...  * Loading manual drivers...  [13904.609404] lp: driver loaded but no devices found [13904.842579] fuse init (API version 7.8) [ OK ] * Activating swap...  [ OK ] * Checking root file system...  fsck 1.40-WIP (14-Nov-2006) /dev/hda1: clean, 112602/366528 files, 497699/732957 blocks [ OK ] * Checking file systems...  fsck 1.40-WIP (14-Nov-2006) /dev/hda3: clean, 145/336000 files, 30077/670713 blocks [ OK ] * Mounting local filesystems...  [ OK ] * Activating swapfile swap...  [ OK ] * Configuring network interfaces...  [ OK ] * Setting sensors limits...  [fail] Ubuntu 7.04 sbctest1 ttyS0 sbctest1 login: * Starting system log daemon...  [ OK ] * Doing Wacom setup...  [ OK ] * Starting kernel log...  [ OK ] * Starting system message bus dbus  [ OK ] * Starting Hardware abstraction layer hald  [ OK ] * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon  [ OK ] * Starting System Tools Backends system-tools-backends  [ OK ] * Starting GNOME Display Manager...  [ OK ] * Starting Common Unix Printing System: cupsd  [ OK ] * Starting HP Linux Printing and Imaging System  [ OK ] * Starting Advanced Power Management daemon...  [ OK ] * Starting powernowd...  /etc/rc2.d/S20powernowd: 156: cannot create /sys/devices/system/cpu/cpu0//cpufreq/scaling_governor: Directory nonexistent * CPU frequency scaling not supported [ OK ] * Starting Samba daemons...  [ OK ] * Starting anac(h)ronistic cron anacron  [ OK ] * Starting deferred execution scheduler atd  [ OK ] * Starting periodic command scheduler crond  [ OK ] * Checking battery state...  [ OK ] * Running local boot scripts (/etc/rc.local)  [ OK ] Ubuntu 7.04 sbctest1 ttyS0 sbctest1 login: