[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-33-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #70-Ubuntu SMP Thu Jul 7 21:09:46 UTC 2011 (Ubuntu 2.6.32-33.70-generic 2.6.32.41+drm33.18) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000008ffec000 (usable) [ 0.000000] BIOS-e820: 000000008ffec000 - 000000008ffef000 (ACPI data) [ 0.000000] BIOS-e820: 000000008ffef000 - 000000008ffff000 (reserved) [ 0.000000] BIOS-e820: 000000008ffff000 - 0000000090000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x8ffec max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FF0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 base 0F8000000 mask FFC000000 write-combining [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000008ffec000 (usable) [ 0.000000] modified: 000000008ffec000 - 000000008ffef000 (ACPI data) [ 0.000000] modified: 000000008ffef000 - 000000008ffff000 (reserved) [ 0.000000] modified: 000000008ffff000 - 0000000090000000 (ACPI NVS) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3784f000 - 37fefb51 [ 0.000000] Allocated new RAMDISK: 008e5000 - 01085b51 [ 0.000000] Move RAMDISK from 000000003784f000 - 0000000037fefb50 to 008e5000 - 01085b50 [ 0.000000] ACPI: RSDP 000f6d70 00014 (v00 ASUS ) [ 0.000000] ACPI: RSDT 8ffec000 0002C (v01 ASUS A7V266-E 30303031 MSFT 31313031) [ 0.000000] ACPI: FACP 8ffec080 00074 (v01 ASUS A7V266-E 30303031 MSFT 31313031) [ 0.000000] ACPI: DSDT 8ffec100 026F3 (v01 ASUS A7V266-E 00001000 MSFT 0100000B) [ 0.000000] ACPI: FACS 8ffff000 00040 [ 0.000000] ACPI: BOOT 8ffec040 00028 (v01 ASUS A7V266-E 30303031 MSFT 31313031) [ 0.000000] 1415MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e0ef8] TEXT DATA BSS ==> [0000100000 - 00008e0ef8] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008e1000 - 00008e4119] BRK ==> [00008e1000 - 00008e4119] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e5000 - 0001085b51] NEW RAMDISK ==> [00008e5000 - 0001085b51] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0008ffec [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0008ffec [ 0.000000] On node 0 totalpages: 589703 [ 0.000000] free_area_init_node: node 0, pgdat c079a7c0, node_mem_map c1087000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2832 pages used for memmap [ 0.000000] HighMem zone: 359646 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:6fff0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36312 r0 d21032 u4194304 [ 0.000000] pcpu-alloc: s36312 r0 d21032 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 585095 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-33-generic root=UUID=8296e637-a8c7-4a76-b467-b8a823cb2031 ro splash quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 11796080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0008ffec) [ 0.000000] Memory: 2311088k/2359216k available (4675k kernel code, 46772k reserved, 2127k data, 668k init, 1449912k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084c000 ( 668 kB) [ 0.000000] .data : 0xc0590dc7 - 0xc07a4d88 (2127 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590dc7 (4675 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1533.417 MHz processor. [ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3066.83 BogoMIPS (lpj=6133668) [ 0.004053] Security Framework initialized [ 0.004120] AppArmor: AppArmor initialized [ 0.004135] Mount-cache hash table entries: 512 [ 0.004415] Initializing cgroup subsys ns [ 0.004424] Initializing cgroup subsys cpuacct [ 0.004432] Initializing cgroup subsys memory [ 0.004451] Initializing cgroup subsys devices [ 0.004456] Initializing cgroup subsys freezer [ 0.004460] Initializing cgroup subsys net_cls [ 0.004501] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004506] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004516] mce: CPU supports 4 MCE banks [ 0.004557] Performance Events: AMD PMU driver. [ 0.004569] ... version: 0 [ 0.004572] ... bit width: 48 [ 0.004575] ... generic registers: 4 [ 0.004578] ... value mask: 0000ffffffffffff [ 0.004581] ... max period: 00007fffffffffff [ 0.004585] ... fixed-purpose events: 0 [ 0.004587] ... event mask: 000000000000000f [ 0.004596] Checking 'hlt' instruction... OK. [ 0.020901] SMP alternatives: switching to UP code [ 0.030141] Freeing SMP alternatives: 19k freed [ 0.030204] ACPI: Core revision 20090903 [ 0.037057] ACPI: setting ELCR to 0200 (from 0e20) [ 0.040027] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040042] ftrace: allocating 21725 entries in 43 pages [ 0.048087] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.048097] weird, boot CPU (#0) not listed by the BIOS. [ 0.048100] SMP motherboard not detected. [ 0.048106] Local APIC not detected. Using dummy APIC emulation. [ 0.048109] SMP disabled [ 0.048642] Brought up 1 CPUs [ 0.048647] Total of 1 processors activated (3066.83 BogoMIPS). [ 0.048678] CPU0 attaching NULL sched-domain. [ 0.048962] devtmpfs: initialized [ 0.049531] regulator: core version 0.5 [ 0.049570] Time: 4:32:37 Date: 07/15/11 [ 0.049673] NET: Registered protocol family 16 [ 0.049910] EISA bus registered [ 0.049936] ACPI: bus type pci registered [ 0.051961] PCI: PCI BIOS revision 2.10 entry at 0xf0e60, last bus=1 [ 0.051965] PCI: Using configuration type 1 for base access [ 0.053464] bio: create slab at 0 [ 0.054109] ACPI: EC: Look up EC in DSDT [ 0.059001] ACPI: Interpreter enabled [ 0.059009] ACPI: (supports S0 S1 S3 S4 S5) [ 0.059045] ACPI: Using PIC for interrupt routing [ 0.065294] ACPI: No dock devices found. [ 0.065472] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.065551] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff] [ 0.065655] pci 0000:00:01.0: supports D1 [ 0.065695] pci 0000:00:05.0: reg 10 io port: [0xd800-0xd8ff] [ 0.065738] pci 0000:00:05.0: supports D1 D2 [ 0.065782] pci 0000:00:0d.0: reg 10 32bit mmio: [0xdd800000-0xdd800fff] [ 0.065822] pci 0000:00:0d.0: supports D1 D2 [ 0.065826] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot [ 0.065832] pci 0000:00:0d.0: PME# disabled [ 0.065867] pci 0000:00:0d.1: reg 10 32bit mmio: [0xdd000000-0xdd000fff] [ 0.065908] pci 0000:00:0d.1: supports D1 D2 [ 0.065911] pci 0000:00:0d.1: PME# supported from D0 D1 D2 D3hot [ 0.065916] pci 0000:00:0d.1: PME# disabled [ 0.065951] pci 0000:00:0d.2: reg 10 32bit mmio: [0xdc800000-0xdc8000ff] [ 0.065992] pci 0000:00:0d.2: supports D1 D2 [ 0.065995] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot [ 0.066000] pci 0000:00:0d.2: PME# disabled [ 0.066045] pci 0000:00:0e.0: reg 10 32bit mmio: [0xdc000000-0xdc0007ff] [ 0.066087] pci 0000:00:0e.0: supports D1 D2 [ 0.066123] pci 0000:00:0f.0: reg 10 io port: [0xd400-0xd4ff] [ 0.066131] pci 0000:00:0f.0: reg 14 32bit mmio: [0xdb800000-0xdb8000ff] [ 0.066169] pci 0000:00:0f.0: supports D1 D2 [ 0.066173] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold [ 0.066178] pci 0000:00:0f.0: PME# disabled [ 0.066214] pci 0000:00:10.0: reg 10 32bit mmio: [0xdb000000-0xdb007fff] [ 0.066377] pci 0000:00:11.1: reg 20 io port: [0xd000-0xd00f] [ 0.066453] pci 0000:00:11.2: reg 20 io port: [0xb800-0xb81f] [ 0.066526] pci 0000:00:11.3: reg 20 io port: [0xb400-0xb41f] [ 0.066599] pci 0000:00:11.4: reg 20 io port: [0xb000-0xb01f] [ 0.066685] pci 0000:01:00.0: reg 10 32bit mmio: [0xde000000-0xdeffffff] [ 0.066693] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.066712] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdffe0000-0xdfffffff] [ 0.066765] pci 0000:00:01.0: bridge 32bit mmio: [0xde000000-0xdfefffff] [ 0.066771] pci 0000:00:01.0: bridge 32bit mmio pref: [0xdff00000-0xf7ffffff] [ 0.066781] pci_bus 0000:00: on NUMA node 0 [ 0.066788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.067070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.074014] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.074154] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.074290] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.074424] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.074635] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.074640] vgaarb: loaded [ 0.074884] SCSI subsystem initialized [ 0.075081] libata version 3.00 loaded. [ 0.075229] usbcore: registered new interface driver usbfs [ 0.075251] usbcore: registered new interface driver hub [ 0.075309] usbcore: registered new device driver usb [ 0.075548] ACPI: WMI: Mapper loaded [ 0.075552] PCI: Using ACPI for IRQ routing [ 0.075789] NetLabel: Initializing [ 0.075793] NetLabel: domain hash size = 128 [ 0.075795] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.075822] NetLabel: unlabeled traffic allowed by default [ 0.075903] Switching to clocksource tsc [ 0.076001] AppArmor: AppArmor Filesystem Enabled [ 0.076001] pnp: PnP ACPI init [ 0.076001] ACPI: bus type pnp registered [ 0.080573] pnp: PnP ACPI: found 14 devices [ 0.080577] ACPI: ACPI bus type pnp unregistered [ 0.080584] PnPBIOS: Disabled by ACPI PNP [ 0.080608] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.080614] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.080619] system 00:00: iomem range 0x100000-0x8fffffff could not be reserved [ 0.080624] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.080628] system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.080640] system 00:02: ioport range 0x3f0-0x3f1 has been reserved [ 0.080645] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.080653] system 00:03: ioport range 0xe400-0xe47f has been reserved [ 0.080657] system 00:03: ioport range 0xe800-0xe80f has been reserved [ 0.080662] system 00:03: ioport range 0x290-0x291 has been reserved [ 0.080666] system 00:03: ioport range 0x370-0x373 has been reserved [ 0.115507] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.115511] pci 0000:00:01.0: IO window: disabled [ 0.115519] pci 0000:00:01.0: MEM window: 0xde000000-0xdfefffff [ 0.115525] pci 0000:00:01.0: PREFETCH window: 0xdff00000-0xf7ffffff [ 0.115547] pci 0000:00:01.0: setting latency timer to 64 [ 0.115557] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.115561] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.115566] pci_bus 0000:01: resource 1 mem: [0xde000000-0xdfefffff] [ 0.115570] pci_bus 0000:01: resource 2 pref mem [0xdff00000-0xf7ffffff] [ 0.115641] NET: Registered protocol family 2 [ 0.115804] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.116533] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.119416] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.120939] TCP: Hash tables configured (established 131072 bind 65536) [ 0.120946] TCP reno registered [ 0.121157] NET: Registered protocol family 1 [ 0.121190] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.121316] pci 0000:01:00.0: Boot video device [ 0.121556] Simple Boot Flag at 0x3a set to 0x1 [ 0.121773] cpufreq-nforce2: No nForce2 chipset. [ 0.121816] Scanning for low memory corruption every 60 seconds [ 0.122050] audit: initializing netlink socket (disabled) [ 0.122072] type=2000 audit(1310704357.120:1): initialized [ 0.135010] Trying to unpack rootfs image as initramfs... [ 0.148600] highmem bounce pool size: 64 pages [ 0.148615] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.154636] VFS: Disk quotas dquot_6.5.2 [ 0.154762] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.155762] fuse init (API version 7.13) [ 0.155895] msgmni has been set to 1683 [ 0.160885] alg: No test for stdrng (krng) [ 0.161028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.161035] io scheduler noop registered [ 0.161038] io scheduler anticipatory registered [ 0.161042] io scheduler deadline registered [ 0.161120] io scheduler cfq registered (default) [ 0.161317] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.161364] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.161566] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.161575] ACPI: Power Button [PWRB] [ 0.161670] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.161674] ACPI: Power Button [PWRF] [ 0.161921] processor LNXCPU:00: registered as cooling_device0 [ 0.170371] isapnp: Scanning for PnP cards... [ 0.176346] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.176489] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.176595] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.177009] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.177158] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.178894] brd: module loaded [ 0.179677] loop: module loaded [ 0.179902] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.184967] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.184976] PCI: setting IRQ 11 as level-triggered [ 0.184985] pata_acpi 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.184993] pata_acpi 0000:00:11.1: VIA VLink IRQ fixup, from 0 to 11 [ 0.185138] pata_acpi 0000:00:11.1: PCI INT A disabled [ 0.185625] Fixed MDIO Bus: probed [ 0.185682] PPP generic driver version 2.4.2 [ 0.185836] tun: Universal TUN/TAP device driver, 1.6 [ 0.185840] tun: (C) 1999-2004 Max Krasnyansky [ 0.186011] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.186403] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 0.186407] PCI: setting IRQ 5 as level-triggered [ 0.186415] ehci_hcd 0000:00:0d.2: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 0.186451] ehci_hcd 0000:00:0d.2: EHCI Host Controller [ 0.186517] ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1 [ 0.232465] ehci_hcd 0000:00:0d.2: irq 5, io mem 0xdc800000 [ 0.244274] ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI 1.00 [ 0.244551] usb usb1: configuration #1 chosen from 1 choice [ 0.244610] hub 1-0:1.0: USB hub found [ 0.244638] hub 1-0:1.0: 5 ports detected [ 0.244762] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.244814] ohci_hcd 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.244852] ohci_hcd 0000:00:0d.0: OHCI Host Controller [ 0.244921] ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 [ 0.244965] ohci_hcd 0000:00:0d.0: irq 11, io mem 0xdd800000 [ 0.380652] usb usb2: configuration #1 chosen from 1 choice [ 0.380714] hub 2-0:1.0: USB hub found [ 0.380742] hub 2-0:1.0: 3 ports detected [ 0.381399] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 0.381405] PCI: setting IRQ 10 as level-triggered [ 0.381414] ohci_hcd 0000:00:0d.1: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 0.381450] ohci_hcd 0000:00:0d.1: OHCI Host Controller [ 0.381533] ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 3 [ 0.381580] ohci_hcd 0000:00:0d.1: irq 10, io mem 0xdd000000 [ 0.500622] usb usb3: configuration #1 chosen from 1 choice [ 0.500697] hub 3-0:1.0: USB hub found [ 0.500725] hub 3-0:1.0: 2 ports detected [ 0.500834] uhci_hcd: USB Universal Host Controller Interface driver [ 0.501490] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 0.501496] PCI: setting IRQ 9 as level-triggered [ 0.501503] uhci_hcd 0000:00:11.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 0.501521] uhci_hcd 0000:00:11.2: UHCI Host Controller [ 0.501613] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4 [ 0.501654] uhci_hcd 0000:00:11.2: irq 9, io base 0x0000b800 [ 0.501860] usb usb4: configuration #1 chosen from 1 choice [ 0.501902] hub 4-0:1.0: USB hub found [ 0.501922] hub 4-0:1.0: 2 ports detected [ 0.501996] uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 0.502007] uhci_hcd 0000:00:11.3: UHCI Host Controller [ 0.502058] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5 [ 0.502083] uhci_hcd 0000:00:11.3: irq 9, io base 0x0000b400 [ 0.502239] usb usb5: configuration #1 chosen from 1 choice [ 0.502279] hub 5-0:1.0: USB hub found [ 0.502295] hub 5-0:1.0: 2 ports detected [ 0.502359] uhci_hcd 0000:00:11.4: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 0.502371] uhci_hcd 0000:00:11.4: UHCI Host Controller [ 0.502419] uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 6 [ 0.502444] uhci_hcd 0000:00:11.4: irq 9, io base 0x0000b000 [ 0.502607] usb usb6: configuration #1 chosen from 1 choice [ 0.502647] hub 6-0:1.0: USB hub found [ 0.502663] hub 6-0:1.0: 2 ports detected [ 0.502815] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.510378] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.510394] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.510724] mice: PS/2 mouse device common for all mice [ 0.510971] rtc_cmos 00:05: RTC can wake from S4 [ 0.511062] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.511093] rtc0: alarms up to one year, 242 bytes nvram [ 0.511269] device-mapper: uevent: version 1.0.3 [ 0.514245] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.515156] device-mapper: multipath: version 1.1.0 loaded [ 0.515173] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.516902] EISA: Probing bus 0 at eisa.0 [ 0.516946] EISA: Detected 0 cards. [ 0.563579] cpuidle: using governor ladder [ 0.563587] cpuidle: using governor menu [ 0.564329] TCP cubic registered [ 0.564595] NET: Registered protocol family 10 [ 0.565723] NET: Registered protocol family 17 [ 0.565803] powernow-k8: Processor cpuid 662 not supported [ 0.565848] Using IPI No-Shortcut mode [ 0.566082] PM: Resume from disk failed. [ 0.566108] registered taskstats version 1 [ 0.566530] Magic number: 3:33:515 [ 0.566719] rtc_cmos 00:05: setting system clock to 2011-07-15 04:32:37 UTC (1310704357) [ 0.566725] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.566728] EDD information not available. [ 0.572844] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.915645] isapnp: No Plug & Play device found [ 0.915699] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 0.918468] Freeing initrd memory: 7810k freed [ 0.937735] Freeing unused kernel memory: 668k freed [ 0.939561] Write protecting the kernel text: 4676k [ 0.939609] Write protecting the kernel read-only data: 1848k [ 0.986589] udev: starting version 151 [ 1.109871] usb 4-1: configuration #1 chosen from 1 choice [ 1.232150] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 1.344414] Floppy drive(s): fd0 is 1.44M [ 1.365789] pata_via 0000:00:11.1: version 0.3.4 [ 1.365832] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.365840] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 0 to 11 [ 1.369263] FDC 0 is a post-1991 82077 [ 1.377094] scsi0 : pata_via [ 1.378035] usb 5-2: not running at top speed; connect to a high speed hub [ 1.391283] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.393320] scsi1 : pata_via [ 1.394435] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 [ 1.394441] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 [ 1.395161] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.412537] usb 5-2: configuration #1 chosen from 1 choice [ 1.417545] usbcore: registered new interface driver hiddev [ 1.437784] input: Cypress Semi. Cypress Ultra Mouse as /devices/pci0000:00/0000:00:11.2/usb4/4-1/4-1:1.0/input/input4 [ 1.438192] generic-usb 0003:05FE:0011.0001: input,hidraw0: USB HID v1.10 Mouse [Cypress Semi. Cypress Ultra Mouse] on usb-0000:00:11.2-1/input0 [ 1.438264] usbcore: registered new interface driver usbhid [ 1.438525] usbhid: v2.6:USB HID core driver [ 1.438841] Initializing USB Mass Storage driver... [ 1.439112] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.439388] usbcore: registered new interface driver usb-storage [ 1.439394] USB Mass Storage support registered. [ 1.439591] usb-storage: device found at 2 [ 1.439594] usb-storage: waiting for device to settle before scanning [ 1.556638] ata1.00: ATA-6: ST340810A, 3.39, max UDMA/100 [ 1.556643] ata1.00: 78165360 sectors, multi 16: LBA [ 1.572499] ata1.00: configured for UDMA/100 [ 1.572772] scsi 0:0:0:0: Direct-Access ATA ST340810A 3.39 PQ: 0 ANSI: 5 [ 1.573120] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.573799] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.573895] sd 0:0:0:0: [sda] Write Protect is off [ 1.573900] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.573949] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.574247] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3 [ 1.681203] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.744403] ata2.00: ATAPI: CD-RW 5232IA, VER 000F, max UDMA/66 [ 1.744446] ata2.01: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66 [ 1.744480] ata2.00: limited to UDMA/33 due to 40-wire cable [ 1.744485] ata2.01: limited to UDMA/33 due to 40-wire cable [ 1.760280] ata2.00: configured for UDMA/33 [ 1.776345] ata2.01: configured for UDMA/33 [ 1.777948] scsi 1:0:0:0: CD-ROM CD-RW 5232IA 000F PQ: 0 ANSI: 5 [ 1.780939] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 1.780949] Uniform CD-ROM driver Revision: 3.20 [ 1.781222] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.781362] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.783155] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI: 5 [ 1.786805] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.787380] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.787622] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 1.804229] 8139too Fast Ethernet driver 0.9.28 [ 1.804333] 8139too 0000:00:0f.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 1.805833] eth0: RealTek RTL8139 at 0xd400, 00:50:ba:5f:44:27, IRQ 5 [ 3.013302] kjournald starting. Commit interval 5 seconds [ 3.013327] EXT3-fs: mounted filesystem with ordered data mode. [ 6.438184] usb-storage: device scan complete [ 6.441126] scsi 2:0:0:0: Direct-Access Hitachi HTS543232L9A300 PQ: 0 ANSI: 2 CCS [ 6.441990] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 6.447068] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 6.452079] sd 2:0:0:0: [sdb] Write Protect is off [ 6.452086] sd 2:0:0:0: [sdb] Mode Sense: 34 00 00 00 [ 6.452091] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.462064] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.462075] sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 > [ 6.559055] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.559065] sd 2:0:0:0: [sdb] Attached SCSI disk [ 6.979836] Adding 979924k swap on /dev/sda9. Priority:-1 extents:1 across:979924k [ 7.889421] udev: starting version 151 [ 9.344949] cfg80211: Calling CRDA to update world regulatory domain [ 9.354564] Linux agpgart interface v0.103 [ 9.370334] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.381037] lp: driver loaded but no devices found [ 9.485642] irda_init() [ 9.485690] NET: Registered protocol family 23 [ 9.998842] parport_pc 00:09: reported by Plug and Play ACPI [ 9.998902] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 10.096383] lp0: using parport0 (interrupt-driven). [ 10.438751] cfg80211: World regulatory domain updated: [ 10.438761] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.438767] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.438771] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.438775] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.438779] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.438783] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.850150] ppdev: user-space parallel port driver [ 10.851798] agpgart: Detected VIA KT266/KY266x/KT333 chipset [ 10.868186] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 10.892731] vga16fb: initializing [ 10.892748] vga16fb: mapped to 0xc00a0000 [ 10.893283] fb0: VGA16 VGA frame buffer device [ 11.066981] psmouse serio1: ID: 10 00 64 [ 11.674705] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 12.710155] nvidia: module license 'NVIDIA' taints kernel. [ 12.710166] Disabling lock debugging due to kernel taint [ 13.739816] nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 13.742872] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 13.874723] Linux video capture interface: v2.00 [ 14.096536] rt61pci 0000:00:10.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 14.174608] Console: switching to colour frame buffer device 80x30 [ 14.305920] type=1505 audit(1310704371.238:2): operation="profile_load" pid=486 name="/sbin/dhclient3" [ 14.306414] type=1505 audit(1310704371.238:3): operation="profile_load" pid=486 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.306696] type=1505 audit(1310704371.238:4): operation="profile_load" pid=486 name="/usr/lib/connman/scripts/dhclient-script" [ 14.307577] type=1505 audit(1310704371.238:5): operation="profile_replace" pid=487 name="/sbin/dhclient3" [ 14.308166] type=1505 audit(1310704371.241:6): operation="profile_replace" pid=487 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.308465] type=1505 audit(1310704371.241:7): operation="profile_replace" pid=487 name="/usr/lib/connman/scripts/dhclient-script" [ 14.612739] saa7130/34: v4l2 driver version 0.2.15 loaded [ 14.740414] phy0: Selected rate control algorithm 'minstrel' [ 14.741639] Registered led device: rt61pci-phy0::radio [ 14.741668] Registered led device: rt61pci-phy0::assoc [ 14.742604] saa7134 0000:00:0e.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 14.742617] saa7133[0]: found at 0000:00:0e.0, rev: 209, irq: 10, latency: 32, mmio: 0xdc000000 [ 14.742629] saa7133[0]: subsystem: 16be:0010, board: Medion/Creatix CTX953 Hybrid [card=134,autodetected] [ 14.742693] saa7133[0]: board init: gpio is 0 [ 14.742723] IRQ 10/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 14.892038] saa7133[0]: i2c eeprom 00: be 16 10 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 14.892055] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50 [ 14.892068] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 2c 02 51 96 2b [ 14.892081] saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c [ 14.892093] saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 22 15 00 fd 79 44 9f c2 8f [ 14.892105] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892117] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892129] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892141] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892153] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892165] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892177] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892189] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892202] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892214] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892226] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.892243] i2c i2c-1: Invalid 7-bit address 0x7a [ 15.816418] tuner 1-004b: chip found @ 0x96 (saa7133[0]) [ 15.896131] tda829x 1-004b: setting tuner address to 60 [ 16.504044] tda829x 1-004b: type set to tda8290+75a [ 18.469558] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.994531] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 18.999389] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 18.999402] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 18.999406] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 19.450206] EXT3 FS on sda7, internal journal [ 20.404559] saa7133[0]: registered device video0 [v4l2] [ 20.404788] saa7133[0]: registered device vbi0 [ 20.404898] C-Media PCI 0000:00:05.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 20.707190] saa7134 ALSA driver for DMA sound loaded [ 20.707228] IRQ 10/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 20.707271] saa7133[0]/alsa: saa7133[0] at 0xdc000000 irq 10 registered as card -2 [ 21.238408] dvb_init() allocating 1 frontend [ 21.336189] DVB: registering new adapter (saa7133[0]) [ 21.336205] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 21.500139] tda1004x: setting up plls for 48MHz sampling clock [ 22.532206] kjournald starting. Commit interval 5 seconds [ 22.532678] EXT3 FS on sda8, internal journal [ 22.532689] EXT3-fs: mounted filesystem with ordered data mode. [ 23.500081] tda1004x: found firmware revision 26 -- ok [ 25.742755] type=1505 audit(1310704382.675:8): operation="profile_load" pid=871 name="/usr/share/gdm/guest-session/Xsession" [ 25.749025] type=1505 audit(1310704382.681:9): operation="profile_replace" pid=872 name="/sbin/dhclient3" [ 25.749574] type=1505 audit(1310704382.681:10): operation="profile_replace" pid=872 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 25.749884] type=1505 audit(1310704382.681:11): operation="profile_replace" pid=872 name="/usr/lib/connman/scripts/dhclient-script" [ 26.848890] type=1505 audit(1310704383.781:12): operation="profile_load" pid=873 name="/usr/bin/evince" [ 26.856089] type=1505 audit(1310704383.789:13): operation="profile_load" pid=873 name="/usr/bin/evince-previewer" [ 26.862580] type=1505 audit(1310704383.793:14): operation="profile_load" pid=873 name="/usr/bin/evince-thumbnailer" [ 27.135436] type=1505 audit(1310704384.065:15): operation="profile_load" pid=878 name="/usr/bin/freshclam" [ 27.378392] eth0: link down [ 27.378872] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.385552] rt61pci 0000:00:10.0: firmware: requesting rt2561s.bin [ 27.713203] type=1505 audit(1310704384.645:16): operation="profile_load" pid=879 name="/usr/lib/cups/backend/cups-pdf" [ 27.713811] type=1505 audit(1310704384.645:17): operation="profile_load" pid=879 name="/usr/sbin/cupsd" [ 27.722040] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.900588] wlan0: direct probe to AP 00:c0:02:0b:e2:1e (try 1) [ 35.900646] wlan0: deauthenticating from 00:c0:02:0b:e2:1e by local choice (reason=3) [ 35.900690] wlan0: direct probe to AP 00:c0:02:0b:e2:1e (try 1) [ 35.906980] wlan0: direct probe responded [ 35.906997] wlan0: authenticate with AP 00:c0:02:0b:e2:1e (try 1) [ 35.908523] wlan0: authenticated [ 35.908581] wlan0: associate with AP 00:c0:02:0b:e2:1e (try 1) [ 35.911384] wlan0: RX AssocResp from 00:c0:02:0b:e2:1e (capab=0x471 status=0 aid=1) [ 35.911394] wlan0: associated [ 35.912447] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.566107] padlock: VIA PadLock not detected. [ 36.576484] RPC: Registered udp transport module. [ 36.576493] RPC: Registered tcp transport module. [ 36.576496] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 36.733085] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 36.733111] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 36.733185] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode [ 37.502322] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 37.911322] svc: failed to register lockdv1 RPC service (errno 97). [ 37.914266] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 37.935089] NFSD: starting 90-second grace period [ 41.815041] __ratelimit: 3 callbacks suppressed [ 41.815050] [webcamstudio_init] : WebcamStudio driver v1.4-trunk [ 41.818096] [webcamstudio_init] : WebcamStudio 0 registered, input: video2, output: video3 [ 41.818106] [webcamstudio_init] : WebcamStudio 0 , Using 2 buffers [ 46.740032] wlan0: no IPv6 routers present [ 50.550962] Outbound IN= OUT=wlan0 SRC=192.168.0.2 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 [ 51.550626] Outbound IN= OUT=wlan0 SRC=192.168.0.2 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 [ 52.550627] Outbound IN= OUT=wlan0 SRC=192.168.0.2 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 [ 53.550633] Outbound IN= OUT=wlan0 SRC=192.168.0.2 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56