[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 (Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005bef0000 (usable) [ 0.000000] BIOS-e820: 000000005bef0000 - 000000005befc000 (ACPI data) [ 0.000000] BIOS-e820: 000000005befc000 - 000000005bf00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005bf00000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x5bef0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-D7FFF uncachable [ 0.000000] D8000-DBFFF write-protect [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 05C000000 mask FFC000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] modified: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000005bef0000 (usable) [ 0.000000] modified: 000000005bef0000 - 000000005befc000 (ACPI data) [ 0.000000] modified: 000000005befc000 - 000000005bf00000 (ACPI NVS) [ 0.000000] modified: 000000005bf00000 - 0000000060000000 (reserved) [ 0.000000] modified: 00000000fffe0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3737c000 - 37fefe94 [ 0.000000] Allocated new RAMDISK: 008e1000 - 01554e94 [ 0.000000] Move RAMDISK from 000000003737c000 - 0000000037fefe93 to 008e1000 - 01554e93 [ 0.000000] ACPI: RSDP 000f68e0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 5bef6c02 0002C (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 5befbe95 00074 (v01 KN400 PTLTW 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 5bef6c2e 05267 (v01 VIA PTL_ACPI 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 5befcfc0 00040 [ 0.000000] ACPI: SSDT 5befbf09 000F7 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] 582MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008dd000 - 00008e0134] BRK ==> [00008dd000 - 00008e0134] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e1000 - 0001554e94] NEW RAMDISK ==> [00008e1000 - 0001554e94] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005bef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005bef0 [ 0.000000] On node 0 totalpages: 376459 [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1556000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1166 pages used for memmap [ 0.000000] HighMem zone: 148068 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ffe0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 373517 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-25-generic root=/dev/sda3 ro vga=769 quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7531200 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0005bef0) [ 0.000000] Memory: 1464104k/1506240k available (4680k kernel code, 40864k reserved, 2122k data, 656k init, 596936k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB) [ 0.000000] .data : 0xc05922c7 - 0xc07a4e68 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc05922c7 (4680 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1658.602 MHz processor. [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3317.20 BogoMIPS (lpj=6634408) [ 0.004044] Security Framework initialized [ 0.004099] AppArmor: AppArmor initialized [ 0.004113] Mount-cache hash table entries: 512 [ 0.004348] Initializing cgroup subsys ns [ 0.004356] Initializing cgroup subsys cpuacct [ 0.004362] Initializing cgroup subsys memory [ 0.004379] Initializing cgroup subsys devices [ 0.004383] Initializing cgroup subsys freezer [ 0.004387] Initializing cgroup subsys net_cls [ 0.004418] CPU: CLK_CTL MSR was 60071263. Reprogramming to 20071263 [ 0.004424] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004428] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004435] mce: CPU supports 4 MCE banks [ 0.004468] Performance Events: AMD PMU driver. [ 0.004479] ... version: 0 [ 0.004482] ... bit width: 48 [ 0.004484] ... generic registers: 4 [ 0.004487] ... value mask: 0000ffffffffffff [ 0.004490] ... max period: 00007fffffffffff [ 0.004493] ... fixed-purpose events: 0 [ 0.004496] ... event mask: 000000000000000f [ 0.004502] Checking 'hlt' instruction... OK. [ 0.020746] SMP alternatives: switching to UP code [ 0.028783] Freeing SMP alternatives: 19k freed [ 0.028836] ACPI: Core revision 20090903 [ 0.040142] ACPI: setting ELCR to 0400 (from 0a30) [ 0.044013] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044025] ftrace: allocating 21789 entries in 43 pages [ 0.048195] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.048202] weird, boot CPU (#0) not listed by the BIOS. [ 0.048205] SMP motherboard not detected. [ 0.048210] Local APIC not detected. Using dummy APIC emulation. [ 0.048213] SMP disabled [ 0.048649] Brought up 1 CPUs [ 0.048653] Total of 1 processors activated (3317.20 BogoMIPS). [ 0.049075] CPU0 attaching NULL sched-domain. [ 0.049381] devtmpfs: initialized [ 0.052255] regulator: core version 0.5 [ 0.052292] Time: 10:28:40 Date: 10/07/10 [ 0.052366] NET: Registered protocol family 16 [ 0.052557] EISA bus registered [ 0.052576] ACPI: bus type pci registered [ 0.052881] PCI: PCI BIOS revision 2.10 entry at 0xfd65c, last bus=1 [ 0.052884] PCI: Using configuration type 1 for base access [ 0.054303] bio: create slab at 0 [ 0.055034] ACPI: EC: Look up EC in DSDT [ 0.059884] ACPI: Interpreter enabled [ 0.059890] ACPI: (supports S0 S3 S4 S5) [ 0.059916] ACPI: Using PIC for interrupt routing [ 0.068862] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62 [ 0.069059] ACPI: No dock devices found. [ 0.070285] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.070353] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.070453] pci 0000:00:01.0: supports D1 [ 0.070496] pci 0000:00:07.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.070515] pci 0000:00:07.0: supports D1 D2 [ 0.070519] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070524] pci 0000:00:07.0: PME# disabled [ 0.070560] pci 0000:00:08.0: reg 10 32bit mmio: [0xd0004000-0xd00047ff] [ 0.070568] pci 0000:00:08.0: reg 14 32bit mmio: [0xd0000000-0xd0003fff] [ 0.070608] pci 0000:00:08.0: supports D1 D2 [ 0.070611] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot [ 0.070616] pci 0000:00:08.0: PME# disabled [ 0.070674] pci 0000:00:10.0: reg 20 io port: [0x1c00-0x1c1f] [ 0.070700] pci 0000:00:10.0: supports D1 D2 [ 0.070703] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070708] pci 0000:00:10.0: PME# disabled [ 0.070758] pci 0000:00:10.1: reg 20 io port: [0x1c20-0x1c3f] [ 0.070784] pci 0000:00:10.1: supports D1 D2 [ 0.070787] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070792] pci 0000:00:10.1: PME# disabled [ 0.070845] pci 0000:00:10.2: reg 20 io port: [0x1c40-0x1c5f] [ 0.070871] pci 0000:00:10.2: supports D1 D2 [ 0.070874] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070879] pci 0000:00:10.2: PME# disabled [ 0.070913] pci 0000:00:10.3: reg 10 32bit mmio: [0xd0004800-0xd00048ff] [ 0.070956] pci 0000:00:10.3: supports D1 D2 [ 0.070959] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070963] pci 0000:00:10.3: PME# disabled [ 0.071030] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.071039] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM [ 0.071044] pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB [ 0.071110] pci 0000:00:11.1: reg 20 io port: [0x1c60-0x1c6f] [ 0.071175] pci 0000:00:11.5: reg 10 io port: [0x1000-0x10ff] [ 0.071219] pci 0000:00:11.5: supports D1 D2 [ 0.071255] pci 0000:00:11.6: reg 10 io port: [0x1400-0x14ff] [ 0.071299] pci 0000:00:11.6: supports D1 D2 [ 0.071335] pci 0000:00:12.0: reg 10 io port: [0x1800-0x18ff] [ 0.071343] pci 0000:00:12.0: reg 14 32bit mmio: [0xd0004c00-0xd0004cff] [ 0.071382] pci 0000:00:12.0: supports D1 D2 [ 0.071385] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.071390] pci 0000:00:12.0: PME# disabled [ 0.071447] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf3ffffff] [ 0.071454] pci 0000:01:00.0: reg 14 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.071473] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.071491] pci 0000:01:00.0: supports D1 D2 [ 0.071530] pci 0000:00:01.0: bridge 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.071536] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf3ffffff] [ 0.071561] pci_bus 0000:00: on NUMA node 0 [ 0.071567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.078339] ACPI: PCI Interrupt Link [LNKA] (IRQs *4) [ 0.078506] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.078676] ACPI: PCI Interrupt Link [LNKC] (IRQs *9) [ 0.078847] ACPI: PCI Interrupt Link [LNKD] (IRQs *11) [ 0.079037] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.079041] vgaarb: loaded [ 0.079249] SCSI subsystem initialized [ 0.079406] libata version 3.00 loaded. [ 0.079538] usbcore: registered new interface driver usbfs [ 0.079556] usbcore: registered new interface driver hub [ 0.079603] usbcore: registered new device driver usb [ 0.079819] ACPI: WMI: Mapper loaded [ 0.079822] PCI: Using ACPI for IRQ routing [ 0.079889] Expanded resource reserved due to conflict with Adapter ROM [ 0.080055] NetLabel: Initializing [ 0.080058] NetLabel: domain hash size = 128 [ 0.080060] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.080083] NetLabel: unlabeled traffic allowed by default [ 0.080158] Switching to clocksource tsc [ 0.083392] AppArmor: AppArmor Filesystem Enabled [ 0.083435] pnp: PnP ACPI init [ 0.083474] ACPI: bus type pnp registered [ 0.089592] pnp: PnP ACPI: found 12 devices [ 0.089596] ACPI: ACPI bus type pnp unregistered [ 0.089602] PnPBIOS: Disabled by ACPI PNP [ 0.089625] system 00:05: iomem range 0x0-0x9ffff could not be reserved [ 0.089630] system 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 0.089635] system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.089640] system 00:05: iomem range 0xffee0000-0xffefffff has been reserved [ 0.089645] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.089649] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.089654] system 00:05: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.089663] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.089667] system 00:06: ioport range 0xfe10-0xfe11 has been reserved [ 0.089671] system 00:06: ioport range 0x600-0x60f has been reserved [ 0.089675] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 0.089680] system 00:06: ioport range 0x4000-0x407f has been reserved [ 0.089684] system 00:06: ioport range 0x8100-0x811f could not be reserved [ 0.124501] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf4000000-0xf3ffffff] [ 0.124506] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.124510] pci 0000:00:01.0: IO window: disabled [ 0.124516] pci 0000:00:01.0: MEM window: 0xd1000000-0xd1ffffff [ 0.124522] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf3ffffff [ 0.124530] pci 0000:00:07.0: CardBus bridge, secondary bus 0000:02 [ 0.124533] pci 0000:00:07.0: IO window: 0x002000-0x0020ff [ 0.124539] pci 0000:00:07.0: IO window: 0x002400-0x0024ff [ 0.124544] pci 0000:00:07.0: PREFETCH window: 0x60000000-0x63ffffff [ 0.124550] pci 0000:00:07.0: MEM window: 0x64000000-0x67ffffff [ 0.124567] pci 0000:00:01.0: setting latency timer to 64 [ 0.124842] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 0.124847] PCI: setting IRQ 5 as level-triggered [ 0.124855] pci 0000:00:07.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 0.124861] pci 0000:00:07.0: setting latency timer to 64 [ 0.124868] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.124871] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.124876] pci_bus 0000:01: resource 1 mem: [0xd1000000-0xd1ffffff] [ 0.124879] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf3ffffff] [ 0.124884] pci_bus 0000:02: resource 0 io: [0x2000-0x20ff] [ 0.124888] pci_bus 0000:02: resource 1 io: [0x2400-0x24ff] [ 0.124891] pci_bus 0000:02: resource 2 pref mem [0x60000000-0x63ffffff] [ 0.124895] pci_bus 0000:02: resource 3 mem: [0x64000000-0x67ffffff] [ 0.124957] NET: Registered protocol family 2 [ 0.125097] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.125691] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.128449] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.129618] TCP: Hash tables configured (established 131072 bind 65536) [ 0.129624] TCP reno registered [ 0.129804] NET: Registered protocol family 1 [ 0.129834] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.129935] pci 0000:01:00.0: Boot video device [ 0.130288] cpufreq-nforce2: No nForce2 chipset. [ 0.130340] Scanning for low memory corruption every 60 seconds [ 0.130545] audit: initializing netlink socket (disabled) [ 0.130563] type=2000 audit(1286447320.127:1): initialized [ 0.142486] Trying to unpack rootfs image as initramfs... [ 0.156219] highmem bounce pool size: 64 pages [ 0.156231] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.164214] VFS: Disk quotas dquot_6.5.2 [ 0.164384] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.165301] fuse init (API version 7.13) [ 0.165428] msgmni has been set to 1695 [ 0.165797] alg: No test for stdrng (krng) [ 0.165849] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.165854] io scheduler noop registered [ 0.165857] io scheduler anticipatory registered [ 0.165860] io scheduler deadline registered [ 0.165923] io scheduler cfq registered (default) [ 0.166094] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.166128] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.166772] ACPI: AC Adapter [ACAD] (on-line) [ 0.166906] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.166913] ACPI: Power Button [PWRB] [ 0.166975] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.166979] ACPI: Sleep Button [SLPB] [ 0.167043] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.167100] ACPI: Lid Switch [LID] [ 0.167171] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.167175] ACPI: Power Button [PWRF] [ 0.167398] Marking TSC unstable due to TSC halts in idle [ 0.167451] processor LNXCPU:00: registered as cooling_device0 [ 0.176101] Switching to clocksource acpi_pm [ 0.177564] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.177581] ACPI: Thermal Zone [THRM] (35 C) [ 0.180138] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.180260] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 0.182090] brd: module loaded [ 0.182826] loop: module loaded [ 0.183006] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.183402] pata_acpi 0000:00:11.1: power state changed by ACPI to D0 [ 0.183446] pata_acpi 0000:00:11.1: power state changed by ACPI to D0 [ 0.183754] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 4 [ 0.183759] PCI: setting IRQ 4 as level-triggered [ 0.183768] pata_acpi 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 4 (level, low) -> IRQ 4 [ 0.183775] pata_acpi 0000:00:11.1: VIA VLink IRQ fixup, from 0 to 4 [ 0.183902] pata_acpi 0000:00:11.1: PCI INT A disabled [ 0.188635] ACPI: Battery Slot [BAT1] (battery absent) [ 0.188680] isapnp: Scanning for PnP cards... [ 0.194597] Fixed MDIO Bus: probed [ 0.194655] PPP generic driver version 2.4.2 [ 0.194781] tun: Universal TUN/TAP device driver, 1.6 [ 0.194784] tun: (C) 1999-2004 Max Krasnyansky [ 0.194932] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.195291] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.195297] PCI: setting IRQ 11 as level-triggered [ 0.195305] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.195339] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 0.195402] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 0.195472] ehci_hcd 0000:00:10.3: irq 11, io mem 0xd0004800 [ 0.244063] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 0.244327] usb usb1: configuration #1 chosen from 1 choice [ 0.244373] hub 1-0:1.0: USB hub found [ 0.244393] hub 1-0:1.0: 6 ports detected [ 0.244493] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.244520] uhci_hcd: USB Universal Host Controller Interface driver [ 0.244622] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 4 (level, low) -> IRQ 4 [ 0.244635] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.244695] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.244729] uhci_hcd 0000:00:10.0: irq 4, io base 0x00001c00 [ 0.244872] usb usb2: configuration #1 chosen from 1 choice [ 0.244908] hub 2-0:1.0: USB hub found [ 0.244924] hub 2-0:1.0: 2 ports detected [ 0.244995] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 0.245006] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.245059] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.245084] uhci_hcd 0000:00:10.1: irq 5, io base 0x00001c20 [ 0.245221] usb usb3: configuration #1 chosen from 1 choice [ 0.245263] hub 3-0:1.0: USB hub found [ 0.245277] hub 3-0:1.0: 2 ports detected [ 0.245713] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 [ 0.245717] PCI: setting IRQ 9 as level-triggered [ 0.245725] uhci_hcd 0000:00:10.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 [ 0.245734] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.245798] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.245825] uhci_hcd 0000:00:10.2: irq 9, io base 0x00001c40 [ 0.245982] usb usb4: configuration #1 chosen from 1 choice [ 0.246018] hub 4-0:1.0: USB hub found [ 0.246034] hub 4-0:1.0: 2 ports detected [ 0.246174] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.248153] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.252494] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.252806] mice: PS/2 mouse device common for all mice [ 0.253067] rtc_cmos 00:02: RTC can wake from S4 [ 0.253148] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.253180] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.253327] device-mapper: uevent: version 1.0.3 [ 0.253530] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.256313] device-mapper: multipath: version 1.1.0 loaded [ 0.256321] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.256602] EISA: Probing bus 0 at eisa.0 [ 0.256613] Cannot allocate resource for EISA slot 1 [ 0.256618] Cannot allocate resource for EISA slot 2 [ 0.256625] Cannot allocate resource for EISA slot 4 [ 0.256644] EISA: Detected 0 cards. [ 0.260593] cpuidle: using governor ladder [ 0.260667] cpuidle: using governor menu [ 0.261322] TCP cubic registered [ 0.261542] NET: Registered protocol family 10 [ 0.262164] lo: Disabled Privacy Extensions [ 0.262577] NET: Registered protocol family 17 [ 0.262655] powernow-k8: Processor cpuid 681 not supported [ 0.262750] powernow: PowerNOW! Technology present. Can scale: frequency and voltage. [ 0.266342] powernow: No PST tables match this cpuid (0x781) [ 0.266345] powernow: This is indicative of a broken BIOS. [ 0.266348] powernow: Trying ACPI perflib [ 0.270385] powernow: Minimum speed 796 MHz. Maximum speed 1658 MHz. [ 0.270493] Using IPI No-Shortcut mode [ 0.270680] PM: Resume from disk failed. [ 0.270704] registered taskstats version 1 [ 0.271020] Magic number: 14:534:476 [ 0.271193] rtc_cmos 00:02: setting system clock to 2010-10-07 10:28:40 UTC (1286447320) [ 0.271198] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.271201] EDD information not available. [ 0.289627] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.867840] isapnp: No Plug & Play device found [ 0.867884] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 1.018721] Freeing initrd memory: 12751k freed [ 1.045911] Freeing unused kernel memory: 656k freed [ 1.047424] Write protecting the kernel text: 4684k [ 1.047467] Write protecting the kernel read-only data: 1840k [ 1.068323] usb 3-2: configuration #1 chosen from 1 choice [ 1.091920] udev: starting version 151 [ 1.471738] Linux agpgart interface v0.103 [ 1.487337] pata_via 0000:00:11.1: version 0.3.4 [ 1.487472] pata_via 0000:00:11.1: power state changed by ACPI to D0 [ 1.487516] pata_via 0000:00:11.1: power state changed by ACPI to D0 [ 1.487532] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 4 (level, low) -> IRQ 4 [ 1.487937] scsi0 : pata_via [ 1.489310] scsi1 : pata_via [ 1.490594] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c60 irq 14 [ 1.490600] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1c68 irq 15 [ 1.508111] agpgart: Detected VIA KM400/KM400A chipset [ 1.533442] FDC 0 is a National Semiconductor PC87306 [ 1.533513] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.534769] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6 [ 1.534960] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.535872] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.535938] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 4 (level, low) -> IRQ 4 [ 1.541072] eth0: VIA Rhine II at 0xd0004c00, 00:c0:9f:2a:9f:a9, IRQ 4. [ 1.541789] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 1.541856] ohci1394 0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 1.596093] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[d0004000-d00047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.652643] ata1.00: ATA-6: IC25N030ATMR04-0, MOAOAD0A, max UDMA/100 [ 1.652648] ata1.00: 58605120 sectors, multi 16: LBA48 [ 1.652678] ata1.00: limited to UDMA/33 due to 40-wire cable [ 1.668488] ata1.00: configured for UDMA/33 [ 1.668699] scsi 0:0:0:0: Direct-Access ATA IC25N030ATMR04-0 MOAO PQ: 0 ANSI: 5 [ 1.668996] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.669608] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 1.669690] sd 0:0:0:0: [sda] Write Protect is off [ 1.669695] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.669736] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.669974] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 [ 1.735837] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.832413] ata2.00: ATAPI: SONY DVD RW DW-D56A, PFS3, max UDMA/33 [ 1.848298] ata2.00: configured for UDMA/33 [ 1.849349] scsi 1:0:0:0: CD-ROM SONY DVD RW DW-D56A PFS3 PQ: 0 ANSI: 5 [ 1.852794] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.852802] Uniform CD-ROM driver Revision: 3.20 [ 1.853036] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.853150] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.879662] usbcore: registered new interface driver hiddev [ 1.895528] input: Logitech USB-PS/2 Mouse M-BA47 as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input7 [ 1.895715] generic-usb 0003:046D:C002.0001: input,hidraw0: USB HID v1.00 Mouse [Logitech USB-PS/2 Mouse M-BA47] on usb-0000:00:10.1-2/input0 [ 1.895767] usbcore: registered new interface driver usbhid [ 1.895772] usbhid: v2.6:USB HID core driver [ 2.647106] vesafb: framebuffer at 0xf0000000, mapped to 0xf8180000, using 320k, total 320k [ 2.647114] vesafb: mode is 640x480x8, linelength=640, pages=0 [ 2.647117] vesafb: scrolling: redraw [ 2.647123] vesafb: Pseudocolor: size=0:8:8:8, shift=0:0:0:0 [ 2.647364] fb0: VESA VGA frame buffer device [ 2.664497] Console: switching to colour frame buffer device 80x30 [ 2.868306] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00000e38c0] [ 2.921184] xor: automatically using best checksumming function: pIII_sse [ 2.940027] pIII_sse : 4631.000 MB/sec [ 2.940031] xor: using function: pIII_sse (4631.000 MB/sec) [ 2.945140] device-mapper: dm-raid45: initialized v0.2594b [ 3.114418] kjournald starting. Commit interval 5 seconds [ 3.114439] EXT3-fs: mounted filesystem with ordered data mode. [ 6.361175] Adding 618460k swap on /dev/sda5. Priority:-1 extents:1 across:618460k [ 6.947805] udev: starting version 151 [ 8.499387] lp: driver loaded but no devices found [ 8.616602] irda_init() [ 8.616639] NET: Registered protocol family 23 [ 8.674784] nsc_ircc_pnp_probe() : From PnP, found firbase 0x3F8 ; irq 3 ; dma 4. [ 8.674938] nsc-ircc, chip->init [ 8.674949] nsc-ircc, Found chip at base=0x02e [ 8.674975] nsc-ircc, driver loaded (Dag Brattli) [ 8.676376] nsc_ircc_open(), can't get iobase of 0x3f8 [ 8.676413] nsc-ircc, Found chip at base=0x02e [ 8.676440] nsc-ircc, driver loaded (Dag Brattli) [ 8.676444] nsc_ircc_open(), can't get iobase of 0x3f8 [ 8.678153] nsc-ircc 00:0b: disabled [ 8.962394] parport_pc 00:09: reported by Plug and Play ACPI [ 8.962443] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 9.057482] lp0: using parport0 (interrupt-driven). [ 9.412591] ppdev: user-space parallel port driver [ 9.544470] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.886421] acer-wmi: Acer Laptop ACPI-WMI Extras [ 9.886445] acer-wmi: No or unsupported WMI interface, unable to load [ 10.032874] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 [ 10.069105] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 10.419997] type=1505 audit(1286440130.646:2): operation="profile_load" pid=469 name="/sbin/dhclient3" [ 10.420619] type=1505 audit(1286440130.648:3): operation="profile_load" pid=469 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.420858] type=1505 audit(1286440130.648:4): operation="profile_load" pid=469 name="/usr/lib/connman/scripts/dhclient-script" [ 10.980814] yenta_cardbus 0000:00:07.0: CardBus bridge found [1025:0033] [ 10.980839] yenta_cardbus 0000:00:07.0: Enabling burst memory read transactions [ 10.980845] yenta_cardbus 0000:00:07.0: Using CSCINT to route CSC interrupts to PCI [ 10.980849] yenta_cardbus 0000:00:07.0: Routing CardBus interrupts to PCI [ 10.980855] yenta_cardbus 0000:00:07.0: TI: mfunc 0x01201212, devctl 0x64 [ 11.212172] yenta_cardbus 0000:00:07.0: ISA IRQ mask 0x0008, PCI irq 5 [ 11.212180] yenta_cardbus 0000:00:07.0: Socket status: 30000006 [ 12.221389] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 12.223414] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 12.224384] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 12.225114] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 12.226070] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 12.663028] VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0 [ 12.663094] VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0 [ 12.663110] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 [ 12.664123] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 13.152503] EXT3 FS on sda3, internal journal [ 13.174547] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0 [ 13.174612] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0 [ 13.174628] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 [ 13.174781] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 13.739166] kjournald starting. Commit interval 5 seconds [ 13.764393] EXT3 FS on sda6, internal journal [ 13.764409] EXT3-fs: mounted filesystem with ordered data mode. [ 21.855135] kjournald starting. Commit interval 5 seconds [ 21.855153] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 21.855416] EXT3 FS on sda7, internal journal [ 21.855425] EXT3-fs: mounted filesystem with ordered data mode. [ 23.577827] type=1505 audit(1286440143.804:5): operation="profile_load" pid=779 name="/usr/share/gdm/guest-session/Xsession" [ 23.581718] type=1505 audit(1286440143.808:6): operation="profile_replace" pid=782 name="/sbin/dhclient3" [ 23.582170] type=1505 audit(1286440143.808:7): operation="profile_replace" pid=782 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 23.582425] type=1505 audit(1286440143.808:8): operation="profile_replace" pid=782 name="/usr/lib/connman/scripts/dhclient-script" [ 24.400727] type=1505 audit(1286440144.628:9): operation="profile_load" pid=783 name="/usr/bin/evince" [ 24.406790] type=1505 audit(1286440144.632:10): operation="profile_load" pid=783 name="/usr/bin/evince-previewer" [ 24.410568] type=1505 audit(1286440144.636:11): operation="profile_load" pid=783 name="/usr/bin/evince-thumbnailer" [ 24.847395] type=1505 audit(1286440145.075:12): operation="profile_load" pid=796 name="/usr/lib/cups/backend/cups-pdf" [ 24.847919] type=1505 audit(1286440145.075:13): operation="profile_load" pid=796 name="/usr/sbin/cupsd" [ 24.912483] type=1505 audit(1286440145.140:14): operation="profile_load" pid=797 name="/usr/sbin/tcpdump" [ 26.087114] eth0: link down [ 26.087946] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.995617] [drm] Initialized drm 1.1.0 20060810 [ 31.039605] pci 0000:01:00.0: power state changed by ACPI to D0 [ 31.039646] pci 0000:01:00.0: power state changed by ACPI to D0 [ 31.039662] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 4 (level, low) -> IRQ 4 [ 31.041984] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 [ 31.154085] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 31.154116] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x [ 31.154125] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode [ 31.154192] pci 0000:01:00.0: putting AGP V2 device into 0x mode [ 45.046025] ttyS0: LSR safety check engaged! [ 491.691969] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 491.692577] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 501.708064] eth0: no IPv6 routers present