[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:17:33 UTC 2010 (Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff75000 (usable) [ 0.000000] BIOS-e820: 000000003ff75000 - 000000003ff77000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff77000 - 000000003ff98000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff98000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3ff75 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-E3FFF write-protect [ 0.000000] E4000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ff75000 (usable) [ 0.000000] modified: 000000003ff75000 - 000000003ff77000 (ACPI NVS) [ 0.000000] modified: 000000003ff77000 - 000000003ff98000 (ACPI data) [ 0.000000] modified: 000000003ff98000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2f83d000 - 2ffd6c7f [ 0.000000] ACPI: RSDP 000feb90 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 000fd501 00038 (v01 DELL 4550 00000008 ASL 00000061) [ 0.000000] ACPI: FACP 000fd539 00074 (v01 DELL 4550 00000008 ASL 00000061) [ 0.000000] ACPI: DSDT fffceb2b 022D0 (v01 DELL dt_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 3ff75000 00040 [ 0.000000] ACPI: SSDT fffd0dfb 000A7 (v01 DELL st_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: APIC 000fd5ad 0006C (v01 DELL 4550 00000008 ASL 00000061) [ 0.000000] ACPI: BOOT 000fd619 00028 (v01 DELL 4550 00000008 ASL 00000061) [ 0.000000] ACPI: ASF! 000fd641 00067 (v16 DELL 4550 00000008 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8] [ 0.000000] #4 [002f83d000 - 002ffd6c7f] RAMDISK ==> [002f83d000 - 002ffd6c7f] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008de000 - 00008e1188] BRK ==> [00008de000 - 00008e1188] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ff75 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0003ff75 [ 0.000000] On node 0 totalpages: 261905 [ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3964 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 271 pages used for memmap [ 0.000000] HighMem zone: 34408 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u1048576 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259858 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=f462aa8b-aee5-4424-96fe-8aeb8e9e68bc ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5240100 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff75) [ 0.000000] Memory: 1016592k/1048020k available (4679k kernel code, 30244k reserved, 2124k data, 660k init, 138716k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB) [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2524.811 MHz processor. [ 0.008011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5049.62 BogoMIPS (lpj=10099244) [ 0.008044] Security Framework initialized [ 0.008095] AppArmor: AppArmor initialized [ 0.008109] Mount-cache hash table entries: 512 [ 0.008370] Initializing cgroup subsys ns [ 0.008380] Initializing cgroup subsys cpuacct [ 0.008388] Initializing cgroup subsys memory [ 0.008401] Initializing cgroup subsys devices [ 0.008407] Initializing cgroup subsys freezer [ 0.008412] Initializing cgroup subsys net_cls [ 0.008452] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.008459] CPU: L2 cache: 512K [ 0.008464] CPU: Hyper-Threading is disabled [ 0.008472] mce: CPU supports 4 MCE banks [ 0.008491] CPU0: Thermal monitoring enabled (TM1) [ 0.008511] Performance Events: no PMU driver, software events only. [ 0.008524] Checking 'hlt' instruction... OK. [ 0.025093] SMP alternatives: switching to UP code [ 0.037463] ACPI: Core revision 20090903 [ 0.073249] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.073260] ftrace: allocating 21780 entries in 43 pages [ 0.076145] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.076450] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.118426] CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07 [ 0.120001] Brought up 1 CPUs [ 0.120001] Total of 1 processors activated (5049.62 BogoMIPS). [ 0.120001] CPU0 attaching NULL sched-domain. [ 0.120001] devtmpfs: initialized [ 0.120001] regulator: core version 0.5 [ 0.120001] Time: 16:58:17 Date: 09/29/10 [ 0.120001] NET: Registered protocol family 16 [ 0.120001] EISA bus registered [ 0.120001] ACPI: bus type pci registered [ 0.137027] PCI: PCI BIOS revision 2.10 entry at 0xfbe62, last bus=2 [ 0.137031] PCI: Using configuration type 1 for base access [ 0.138319] bio: create slab at 0 [ 0.138828] ACPI: EC: Look up EC in DSDT [ 0.164103] ACPI: Interpreter enabled [ 0.164125] ACPI: (supports S0 S1 S3 S4 S5) [ 0.164155] ACPI: Using IOAPIC for interrupt routing [ 0.185206] ACPI: No dock devices found. [ 0.185237] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.185300] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.185462] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] [ 0.185521] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] [ 0.185580] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] [ 0.185647] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe300800-0xfe300bff] [ 0.185709] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.185715] pci 0000:00:1d.7: PME# disabled [ 0.185770] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.185772] * this clock source is slow. If you are sure your timer does not have [ 0.185774] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.185820] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.185825] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO [ 0.185852] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.185860] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.185868] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.185876] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.185884] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.185892] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.185949] pci 0000:00:1f.3: reg 20 io port: [0xdc80-0xdc9f] [ 0.185998] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff] [ 0.186005] pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f] [ 0.186013] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfe300400-0xfe3005ff] [ 0.186021] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfe300000-0xfe3000ff] [ 0.186053] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.186058] pci 0000:00:1f.5: PME# disabled [ 0.186102] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.186109] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.186116] pci 0000:01:00.0: reg 18 32bit mmio pref: [0xf3f80000-0xf3ffffff] [ 0.186133] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x80000000-0x8001ffff] [ 0.186191] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.186196] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.186235] pci 0000:02:01.0: reg 10 32bit mmio: [0xfe1ff000-0xfe1fffff] [ 0.186243] pci 0000:02:01.0: reg 14 io port: [0xecf0-0xecff] [ 0.186284] pci 0000:02:01.0: supports D1 D2 [ 0.186287] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.186292] pci 0000:02:01.0: PME# disabled [ 0.186337] pci 0000:02:08.0: reg 10 32bit mmio: [0xfe1fe000-0xfe1fefff] [ 0.186345] pci 0000:02:08.0: reg 14 io port: [0xec80-0xecbf] [ 0.186385] pci 0000:02:08.0: supports D1 D2 [ 0.186388] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.186393] pci 0000:02:08.0: PME# disabled [ 0.186427] pci 0000:00:1e.0: transparent bridge [ 0.186432] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.186438] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe100000-0xfe2fffff] [ 0.186454] pci_bus 0000:00: on NUMA node 0 [ 0.186460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.186788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.214771] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.215107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.215439] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.215771] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.216117] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.216447] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.216783] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.217114] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.217324] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.217329] vgaarb: loaded [ 0.217515] SCSI subsystem initialized [ 0.217628] libata version 3.00 loaded. [ 0.217737] usbcore: registered new interface driver usbfs [ 0.217754] usbcore: registered new interface driver hub [ 0.217788] usbcore: registered new device driver usb [ 0.217966] ACPI: WMI: Mapper loaded [ 0.217969] PCI: Using ACPI for IRQ routing [ 0.218159] NetLabel: Initializing [ 0.218162] NetLabel: domain hash size = 128 [ 0.218164] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.218182] NetLabel: unlabeled traffic allowed by default [ 0.218241] Switching to clocksource tsc [ 0.220001] AppArmor: AppArmor Filesystem Enabled [ 0.220001] pnp: PnP ACPI init [ 0.220001] ACPI: bus type pnp registered [ 0.238710] pnp 00:0a: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.238716] pnp 00:0a: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.239458] pnp: PnP ACPI: found 11 devices [ 0.239461] ACPI: ACPI bus type pnp unregistered [ 0.239467] PnPBIOS: Disabled by ACPI PNP [ 0.239485] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.239491] system 00:00: iomem range 0x100000-0xffffff could not be reserved [ 0.239496] system 00:00: iomem range 0x1000000-0x3ff74fff could not be reserved [ 0.239499] system 00:00: iomem range 0xc0000-0xfffff could not be reserved [ 0.239504] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.239508] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.239511] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.239515] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved [ 0.239529] system 00:0a: ioport range 0xc00-0xc7f has been reserved [ 0.274350] pci 0000:01:00.0: BAR 6: no parent found for of device [0x80000000-0x8001ffff] [ 0.274376] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.274378] pci 0000:00:01.0: IO window: disabled [ 0.274385] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff [ 0.274390] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff [ 0.274398] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.274402] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.274409] pci 0000:00:1e.0: MEM window: 0xfe100000-0xfe2fffff [ 0.274413] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.274434] pci 0000:00:1e.0: setting latency timer to 64 [ 0.274440] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.274443] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.274447] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff] [ 0.274450] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] [ 0.274454] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.274457] pci_bus 0000:02: resource 1 mem: [0xfe100000-0xfe2fffff] [ 0.274461] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.274464] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.274518] NET: Registered protocol family 2 [ 0.274665] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.275238] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.276586] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.277495] TCP: Hash tables configured (established 131072 bind 65536) [ 0.277500] TCP reno registered [ 0.277824] NET: Registered protocol family 1 [ 0.277957] pci 0000:01:00.0: Boot video device [ 0.277971] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.278143] Simple Boot Flag value 0x87 read from CMOS RAM was invalid [ 0.278146] Simple Boot Flag at 0x7a set to 0x1 [ 0.278283] cpufreq-nforce2: No nForce2 chipset. [ 0.278330] Scanning for low memory corruption every 60 seconds [ 0.278493] audit: initializing netlink socket (disabled) [ 0.278511] type=2000 audit(1285779497.277:1): initialized [ 0.288284] Trying to unpack rootfs image as initramfs... [ 0.301995] highmem bounce pool size: 64 pages [ 0.302005] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.303963] VFS: Disk quotas dquot_6.5.2 [ 0.304045] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.304900] fuse init (API version 7.13) [ 0.305021] msgmni has been set to 1716 [ 0.310009] alg: No test for stdrng (krng) [ 0.310146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.310151] io scheduler noop registered [ 0.310153] io scheduler anticipatory registered [ 0.310156] io scheduler deadline registered [ 0.310218] io scheduler cfq registered (default) [ 0.310377] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.310415] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.310551] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.310564] ACPI: Power Button [VBTN] [ 0.310633] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.310637] ACPI: Power Button [PWRF] [ 0.310897] processor LNXCPU:00: registered as cooling_device0 [ 0.339933] isapnp: Scanning for PnP cards... [ 0.345771] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.345888] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.346344] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.346465] alloc irq_desc for 22 on node -1 [ 0.346469] alloc kstat_irqs on node -1 [ 0.346482] serial 0000:02:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.347952] brd: module loaded [ 0.348611] loop: module loaded [ 0.348755] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.348921] ata_piix 0000:00:1f.1: version 2.13 [ 0.348936] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.348947] alloc irq_desc for 18 on node -1 [ 0.348950] alloc kstat_irqs on node -1 [ 0.348960] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.349040] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.397558] scsi0 : ata_piix [ 0.397807] scsi1 : ata_piix [ 0.397857] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.397862] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.398389] Fixed MDIO Bus: probed [ 0.398450] PPP generic driver version 2.4.2 [ 0.398573] tun: Universal TUN/TAP device driver, 1.6 [ 0.398576] tun: (C) 1999-2004 Max Krasnyansky [ 0.398702] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.398739] alloc irq_desc for 23 on node -1 [ 0.398743] alloc kstat_irqs on node -1 [ 0.398754] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.398777] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.398782] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.398830] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.398874] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.402765] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.405850] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe300800 [ 0.426222] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.426439] usb usb1: configuration #1 chosen from 1 choice [ 0.426491] hub 1-0:1.0: USB hub found [ 0.426510] hub 1-0:1.0: 6 ports detected [ 0.426604] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.426628] uhci_hcd: USB Universal Host Controller Interface driver [ 0.426708] alloc irq_desc for 16 on node -1 [ 0.426712] alloc kstat_irqs on node -1 [ 0.426724] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.426738] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.426742] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.426805] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.426847] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80 [ 0.426969] usb usb2: configuration #1 chosen from 1 choice [ 0.427006] hub 2-0:1.0: USB hub found [ 0.427020] hub 2-0:1.0: 2 ports detected [ 0.427076] alloc irq_desc for 19 on node -1 [ 0.427079] alloc kstat_irqs on node -1 [ 0.427085] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.427093] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.427097] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.427144] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.427176] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60 [ 0.427307] usb usb3: configuration #1 chosen from 1 choice [ 0.427343] hub 3-0:1.0: USB hub found [ 0.427355] hub 3-0:1.0: 2 ports detected [ 0.427409] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.427418] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.427422] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.427475] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.427507] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 0.427641] usb usb4: configuration #1 chosen from 1 choice [ 0.427678] hub 4-0:1.0: USB hub found [ 0.427689] hub 4-0:1.0: 2 ports detected [ 0.427809] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1 [ 0.427813] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.428659] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.428824] mice: PS/2 mouse device common for all mice [ 0.428988] rtc_cmos 00:05: RTC can wake from S4 [ 0.429047] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.429072] rtc0: alarms up to one day, 242 bytes nvram [ 0.429233] device-mapper: uevent: version 1.0.3 [ 0.432347] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.433515] device-mapper: multipath: version 1.1.0 loaded [ 0.433520] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.435338] EISA: Probing bus 0 at eisa.0 [ 0.435380] EISA: Detected 0 cards. [ 0.438054] cpuidle: using governor ladder [ 0.438059] cpuidle: using governor menu [ 0.438747] TCP cubic registered [ 0.438925] NET: Registered protocol family 10 [ 0.439619] lo: Disabled Privacy Extensions [ 0.440062] NET: Registered protocol family 17 [ 0.440157] Using IPI No-Shortcut mode [ 0.440320] PM: Resume from disk failed. [ 0.440338] registered taskstats version 1 [ 0.440607] Magic number: 10:338:996 [ 0.440705] rtc_cmos 00:05: setting system clock to 2010-09-29 16:58:17 UTC (1285779497) [ 0.440709] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.440712] EDD information not available. [ 0.449892] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.598233] ata2.00: ATAPI: SAMSUNG CDRW/DVD SM-332B, T410, max UDMA/33 [ 0.598285] ata2.01: ATAPI: PHILIPS DVD+/-RW DVD8631, 9D03, max UDMA/33 [ 0.614060] ata2.00: configured for UDMA/33 [ 0.630512] ata2.01: configured for UDMA/33 [ 0.849566] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 0.879042] Freeing initrd memory: 7783k freed [ 0.982274] isapnp: No Plug & Play device found [ 1.015024] usb 1-6: configuration #1 chosen from 1 choice [ 1.256016] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 1.438851] usb 2-1: configuration #1 chosen from 1 choice [ 2.748485] ata1.00: ATA-6: ST360015A, 3.33, max UDMA/100 [ 2.748489] ata1.00: 117231408 sectors, multi 0: LBA [ 2.748726] ata1.01: ATA-7: Maxtor 6Y160P0, YAR41BW0, max UDMA/133 [ 2.748730] ata1.01: 320173056 sectors, multi 0: LBA48 [ 2.764402] ata1.00: configured for UDMA/100 [ 2.780378] ata1.01: configured for UDMA/100 [ 2.780563] scsi 0:0:0:0: Direct-Access ATA ST360015A 3.33 PQ: 0 ANSI: 5 [ 2.780794] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.780992] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y160P0 YAR4 PQ: 0 ANSI: 5 [ 2.781158] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 2.781338] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 2.781402] sd 0:0:0:0: [sda] Write Protect is off [ 2.781406] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.781438] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.781633] sda: [ 2.782381] scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SM-332B T410 PQ: 0 ANSI: 5 [ 2.785454] sr0: scsi3-mmc drive: 0x/40x writer cd/rw xa/form2 cdda tray [ 2.785460] Uniform CD-ROM driver Revision: 3.20 [ 2.785602] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.785686] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 2.786906] sda1 sda2 [ 2.787273] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.787306] sd 0:0:1:0: [sdb] 320173056 512-byte logical blocks: (163 GB/152 GiB) [ 2.787363] sd 0:0:1:0: [sdb] Write Protect is off [ 2.787367] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.787397] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.787567] sdb: [ 2.788052] scsi 1:0:1:0: CD-ROM PHILIPS DVD+-RW DVD8631 9D03 PQ: 0 ANSI: 5 [ 2.795542] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.795673] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 2.795755] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 2.805425] sdb1 sdb2 < sdb5 sdb6 > [ 2.843627] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.843649] Freeing unused kernel memory: 660k freed [ 2.844745] Write protecting the kernel text: 4680k [ 2.844780] Write protecting the kernel read-only data: 1844k [ 2.878400] udev: starting version 151 [ 3.139954] Floppy drive(s): fd0 is 1.44M [ 3.158693] FDC 0 is a post-1991 82077 [ 3.189411] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 3.189419] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.189498] alloc irq_desc for 20 on node -1 [ 3.189501] alloc kstat_irqs on node -1 [ 3.189514] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.212238] e100 0000:02:08.0: PME# disabled [ 3.252920] usbcore: registered new interface driver hiddev [ 3.253832] Initializing USB Mass Storage driver... [ 3.253992] scsi2 : SCSI emulation for USB Mass Storage devices [ 3.254254] usbcore: registered new interface driver usb-storage [ 3.254259] USB Mass Storage support registered. [ 3.254824] usb-storage: device found at 3 [ 3.254828] usb-storage: waiting for device to settle before scanning [ 3.255761] e100: eth0: e100_probe: addr 0xfe1fe000, irq 20, MAC addr 00:07:e9:bc:b2:63 [ 3.267000] input: Gyration GyroPoint RF Technology Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4 [ 3.267143] generic-usb 0003:0C16:0001.0001: input,hidraw0: USB HID v1.00 Keyboard [Gyration GyroPoint RF Technology Receiver] on usb-0000:00:1d.0-1/input0 [ 3.295402] input: Gyration GyroPoint RF Technology Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input5 [ 3.296104] generic-usb 0003:0C16:0001.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [Gyration GyroPoint RF Technology Receiver] on usb-0000:00:1d.0-1/input1 [ 3.296151] usbcore: registered new interface driver usbhid [ 3.296283] usbhid: v2.6:USB HID core driver [ 3.680880] EXT4-fs (sdb5): mounted filesystem with ordered data mode [ 8.252251] usb-storage: device scan complete [ 8.252834] scsi 2:0:0:0: Direct-Access WD 2500BEV External 1.04 PQ: 0 ANSI: 4 [ 8.253457] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 8.254182] sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 8.255050] sd 2:0:0:0: [sdc] Write Protect is off [ 8.255055] sd 2:0:0:0: [sdc] Mode Sense: 21 00 00 00 [ 8.255058] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 8.256676] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 8.256683] sdc: sdc1 [ 8.569137] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 8.569143] sd 2:0:0:0: [sdc] Attached SCSI disk [ 18.964760] Adding 1618936k swap on /dev/sdb6. Priority:-1 extents:1 across:1618936k [ 19.033806] udev: starting version 151 [ 19.173913] lp: driver loaded but no devices found [ 19.192191] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.271233] intel_rng: Firmware space is locked read-only. If you can't or [ 19.271236] intel_rng: don't want to disable this in firmware setup, and if [ 19.271238] intel_rng: you are certain that your system has a functional [ 19.271240] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 19.271506] Linux agpgart interface v0.103 [ 19.456449] agpgart-intel 0000:00:00.0: Intel 830M Chipset [ 19.614018] vga16fb: initializing [ 19.614025] vga16fb: mapped to 0xc00a0000 [ 19.614138] fb0: VGA16 VGA frame buffer device [ 19.648378] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 19.671002] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.676585] parport_pc 00:09: reported by Plug and Play ACPI [ 19.676647] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 19.764371] lp0: using parport0 (interrupt-driven). [ 19.932135] nvidia: module license 'NVIDIA' taints kernel. [ 19.932141] Disabling lock debugging due to kernel taint [ 20.192185] type=1505 audit(1285775917.251:2): operation="profile_load" pid=501 name="/sbin/dhclient3" [ 20.192809] type=1505 audit(1285775917.251:3): operation="profile_load" pid=501 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 20.193144] type=1505 audit(1285775917.251:4): operation="profile_load" pid=501 name="/usr/lib/connman/scripts/dhclient-script" [ 20.330031] dell-wmi: No known WMI GUID found [ 20.351321] ppdev: user-space parallel port driver [ 20.764104] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.847963] nf_conntrack version 0.5.0 (16028 buckets, 64112 max) [ 20.850600] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 20.850606] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 20.850609] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 21.030742] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 21.068100] alloc irq_desc for 17 on node -1 [ 21.068104] alloc kstat_irqs on node -1 [ 21.068115] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 21.068168] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 21.086818] Console: switching to colour frame buffer device 80x30 [ 21.286046] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.286061] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 21.287797] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.17 Thu Apr 15 05:28:41 PDT 2010 [ 21.456080] intel8x0_measure_ac97_clock: measured 55165 usecs (2658 samples) [ 21.456086] intel8x0: clocking to 48000 [ 30.934185] type=1505 audit(1285775927.991:5): operation="profile_load" pid=795 name="/usr/share/gdm/guest-session/Xsession" [ 30.946730] type=1505 audit(1285775928.003:6): operation="profile_replace" pid=796 name="/sbin/dhclient3" [ 30.947388] type=1505 audit(1285775928.003:7): operation="profile_replace" pid=796 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 30.947740] type=1505 audit(1285775928.003:8): operation="profile_replace" pid=796 name="/usr/lib/connman/scripts/dhclient-script" [ 30.987353] type=1505 audit(1285775928.043:9): operation="profile_load" pid=799 name="/usr/bin/evince" [ 31.033166] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.036166] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 31.036451] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.062009] type=1505 audit(1285775928.119:10): operation="profile_load" pid=799 name="/usr/bin/evince-previewer" [ 31.096505] type=1505 audit(1285775928.155:11): operation="profile_load" pid=799 name="/usr/bin/evince-thumbnailer" [ 31.145872] type=1505 audit(1285775928.203:12): operation="profile_load" pid=873 name="/usr/bin/freshclam" [ 31.159901] type=1505 audit(1285775928.215:13): operation="profile_load" pid=874 name="/usr/sbin/clamd" [ 31.167528] type=1505 audit(1285775928.223:14): operation="profile_load" pid=876 name="/usr/lib/cups/backend/cups-pdf" [ 31.627019] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 31.627039] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 31.627077] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode [ 41.772034] eth0: no IPv6 routers present [ 2144.410766] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2144.410773] ata1.01: BMDMA stat 0x64 [ 2144.410778] ata1.01: failed command: READ DMA [ 2144.410786] ata1.01: cmd c8/00:b0:c0:c8:10/00:00:00:00:00/ff tag 0 dma 90112 in [ 2144.410788] res 51/40:00:13:c9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2144.410792] ata1.01: status: { DRDY ERR } [ 2144.410795] ata1.01: error: { UNC } [ 2144.432450] ata1.00: configured for UDMA/100 [ 2144.448449] ata1.01: configured for UDMA/100 [ 2144.448470] ata1: EH complete [ 2145.776051] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2145.776059] ata1.01: BMDMA stat 0x64 [ 2145.776065] ata1.01: failed command: READ DMA [ 2145.776073] ata1.01: cmd c8/00:b0:c0:c8:10/00:00:00:00:00/ff tag 0 dma 90112 in [ 2145.776075] res 51/40:00:13:c9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2145.776079] ata1.01: status: { DRDY ERR } [ 2145.776082] ata1.01: error: { UNC } [ 2145.800451] ata1.00: configured for UDMA/100 [ 2145.816534] ata1.01: configured for UDMA/100 [ 2145.816557] ata1: EH complete [ 2147.141463] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2147.141471] ata1.01: BMDMA stat 0x64 [ 2147.141477] ata1.01: failed command: READ DMA [ 2147.141485] ata1.01: cmd c8/00:b0:c0:c8:10/00:00:00:00:00/ff tag 0 dma 90112 in [ 2147.141487] res 51/40:00:13:c9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2147.141491] ata1.01: status: { DRDY ERR } [ 2147.141494] ata1.01: error: { UNC } [ 2147.164862] ata1.00: configured for UDMA/100 [ 2147.180440] ata1.01: configured for UDMA/100 [ 2147.180460] ata1: EH complete [ 2148.506900] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2148.506908] ata1.01: BMDMA stat 0x64 [ 2148.506914] ata1.01: failed command: READ DMA [ 2148.506922] ata1.01: cmd c8/00:b0:c0:c8:10/00:00:00:00:00/ff tag 0 dma 90112 in [ 2148.506924] res 51/40:00:13:c9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2148.506928] ata1.01: status: { DRDY ERR } [ 2148.506931] ata1.01: error: { UNC } [ 2148.528585] ata1.00: configured for UDMA/100 [ 2148.537371] ata1.01: configured for UDMA/100 [ 2148.537386] ata1: EH complete [ 2149.863990] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2149.863998] ata1.01: BMDMA stat 0x64 [ 2149.864023] ata1.01: failed command: READ DMA [ 2149.864032] ata1.01: cmd c8/00:b0:c0:c8:10/00:00:00:00:00/ff tag 0 dma 90112 in [ 2149.864034] res 51/40:00:13:c9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2149.864038] ata1.01: status: { DRDY ERR } [ 2149.864041] ata1.01: error: { UNC } [ 2149.888436] ata1.00: configured for UDMA/100 [ 2149.904590] ata1.01: configured for UDMA/100 [ 2149.904613] ata1: EH complete [ 2151.229384] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2151.229391] ata1.01: BMDMA stat 0x64 [ 2151.229397] ata1.01: failed command: READ DMA [ 2151.229405] ata1.01: cmd c8/00:b0:c0:c8:10/00:00:00:00:00/ff tag 0 dma 90112 in [ 2151.229407] res 51/40:00:13:c9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2151.229411] ata1.01: status: { DRDY ERR } [ 2151.229414] ata1.01: error: { UNC } [ 2151.252476] ata1.00: configured for UDMA/100 [ 2151.268444] ata1.01: configured for UDMA/100 [ 2151.268473] sd 0:0:1:0: [sdb] Unhandled sense code [ 2151.268476] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2151.268481] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor] [ 2151.268487] Descriptor sense data with sense descriptors (in hex): [ 2151.268490] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 2151.268501] 0f 10 c9 13 [ 2151.268506] sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed [ 2151.268513] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 0f 10 c8 c0 00 00 b0 00 [ 2151.268524] end_request: I/O error, dev sdb, sector 252758291 [ 2151.268555] ata1: EH complete [ 2154.385128] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2154.385135] ata1.01: BMDMA stat 0x64 [ 2154.385140] ata1.01: failed command: READ DMA [ 2154.385148] ata1.01: cmd c8/00:00:f0:b8:10/00:00:00:00:00/ff tag 0 dma 131072 in [ 2154.385150] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2154.385154] ata1.01: status: { DRDY ERR } [ 2154.385157] ata1.01: error: { UNC } [ 2154.408459] ata1.00: configured for UDMA/100 [ 2154.424499] ata1.01: configured for UDMA/100 [ 2154.424526] ata1: EH complete [ 2155.750497] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2155.750504] ata1.01: BMDMA stat 0x64 [ 2155.750510] ata1.01: failed command: READ DMA [ 2155.750518] ata1.01: cmd c8/00:00:f0:b8:10/00:00:00:00:00/ff tag 0 dma 131072 in [ 2155.750520] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2155.750524] ata1.01: status: { DRDY ERR } [ 2155.750527] ata1.01: error: { UNC } [ 2155.772479] ata1.00: configured for UDMA/100 [ 2155.789093] ata1.01: configured for UDMA/100 [ 2155.789120] ata1: EH complete [ 2157.115954] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2157.115961] ata1.01: BMDMA stat 0x64 [ 2157.115967] ata1.01: failed command: READ DMA [ 2157.115975] ata1.01: cmd c8/00:00:f0:b8:10/00:00:00:00:00/ff tag 0 dma 131072 in [ 2157.115977] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2157.115981] ata1.01: status: { DRDY ERR } [ 2157.115984] ata1.01: error: { UNC } [ 2157.140438] ata1.00: configured for UDMA/100 [ 2157.156432] ata1.01: configured for UDMA/100 [ 2157.156453] ata1: EH complete [ 2158.481358] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2158.481365] ata1.01: BMDMA stat 0x64 [ 2158.481371] ata1.01: failed command: READ DMA [ 2158.481379] ata1.01: cmd c8/00:00:f0:b8:10/00:00:00:00:00/ff tag 0 dma 131072 in [ 2158.481381] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2158.481385] ata1.01: status: { DRDY ERR } [ 2158.481388] ata1.01: error: { UNC } [ 2158.504481] ata1.00: configured for UDMA/100 [ 2158.512975] ata1.01: configured for UDMA/100 [ 2158.513000] ata1: EH complete [ 2159.838458] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2159.838466] ata1.01: BMDMA stat 0x64 [ 2159.838472] ata1.01: failed command: READ DMA [ 2159.838480] ata1.01: cmd c8/00:00:f0:b8:10/00:00:00:00:00/ff tag 0 dma 131072 in [ 2159.838482] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2159.838486] ata1.01: status: { DRDY ERR } [ 2159.838489] ata1.01: error: { UNC } [ 2159.860434] ata1.00: configured for UDMA/100 [ 2159.879006] ata1.01: configured for UDMA/100 [ 2159.879032] ata1: EH complete [ 2161.203893] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2161.203901] ata1.01: BMDMA stat 0x64 [ 2161.203906] ata1.01: failed command: READ DMA [ 2161.203914] ata1.01: cmd c8/00:00:f0:b8:10/00:00:00:00:00/ff tag 0 dma 131072 in [ 2161.203916] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2161.203920] ata1.01: status: { DRDY ERR } [ 2161.203923] ata1.01: error: { UNC } [ 2161.228472] ata1.00: configured for UDMA/100 [ 2161.244430] ata1.01: configured for UDMA/100 [ 2161.244461] sd 0:0:1:0: [sdb] Unhandled sense code [ 2161.244465] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2161.244470] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor] [ 2161.244476] Descriptor sense data with sense descriptors (in hex): [ 2161.244479] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 2161.244490] 0f 10 b9 6f [ 2161.244495] sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed [ 2161.244502] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 0f 10 b8 f0 00 01 00 00 [ 2161.244513] end_request: I/O error, dev sdb, sector 252754287 [ 2161.244549] ata1: EH complete [ 2194.148398] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2194.148405] ata1.01: BMDMA stat 0x64 [ 2194.148411] ata1.01: failed command: READ DMA [ 2194.148419] ata1.01: cmd c8/00:08:68:b9:10/00:00:00:00:00/ff tag 0 dma 4096 in [ 2194.148421] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2194.148425] ata1.01: status: { DRDY ERR } [ 2194.148428] ata1.01: error: { UNC } [ 2194.172425] ata1.00: configured for UDMA/100 [ 2194.188449] ata1.01: configured for UDMA/100 [ 2194.188470] ata1: EH complete [ 2195.513785] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2195.513792] ata1.01: BMDMA stat 0x64 [ 2195.513798] ata1.01: failed command: READ DMA [ 2195.513806] ata1.01: cmd c8/00:08:68:b9:10/00:00:00:00:00/ff tag 0 dma 4096 in [ 2195.513808] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2195.513813] ata1.01: status: { DRDY ERR } [ 2195.513816] ata1.01: error: { UNC } [ 2195.536422] ata1.00: configured for UDMA/100 [ 2195.552756] ata1.01: configured for UDMA/100 [ 2195.552780] ata1: EH complete [ 2196.879366] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2196.879374] ata1.01: BMDMA stat 0x64 [ 2196.879380] ata1.01: failed command: READ DMA [ 2196.879388] ata1.01: cmd c8/00:08:68:b9:10/00:00:00:00:00/ff tag 0 dma 4096 in [ 2196.879390] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2196.879394] ata1.01: status: { DRDY ERR } [ 2196.879397] ata1.01: error: { UNC } [ 2196.900437] ata1.00: configured for UDMA/100 [ 2196.916449] ata1.01: configured for UDMA/100 [ 2196.916472] ata1: EH complete [ 2198.244641] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2198.244649] ata1.01: BMDMA stat 0x64 [ 2198.244654] ata1.01: failed command: READ DMA [ 2198.244662] ata1.01: cmd c8/00:08:68:b9:10/00:00:00:00:00/ff tag 0 dma 4096 in [ 2198.244664] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2198.244668] ata1.01: status: { DRDY ERR } [ 2198.244671] ata1.01: error: { UNC } [ 2198.268547] ata1.00: configured for UDMA/100 [ 2198.284428] ata1.01: configured for UDMA/100 [ 2198.284450] ata1: EH complete [ 2199.626802] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2199.626810] ata1.01: BMDMA stat 0x64 [ 2199.626817] ata1.01: failed command: READ DMA [ 2199.626825] ata1.01: cmd c8/00:08:68:b9:10/00:00:00:00:00/ff tag 0 dma 4096 in [ 2199.626827] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2199.626831] ata1.01: status: { DRDY ERR } [ 2199.626834] ata1.01: error: { UNC } [ 2199.654001] ata1.00: configured for UDMA/100 [ 2199.668419] ata1.01: configured for UDMA/100 [ 2199.668440] ata1: EH complete [ 2200.992145] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2200.992151] ata1.01: BMDMA stat 0x64 [ 2200.992157] ata1.01: failed command: READ DMA [ 2200.992165] ata1.01: cmd c8/00:08:68:b9:10/00:00:00:00:00/ff tag 0 dma 4096 in [ 2200.992167] res 51/40:00:6f:b9:10/00:00:00:00:00/ff Emask 0x9 (media error) [ 2200.992171] ata1.01: status: { DRDY ERR } [ 2200.992174] ata1.01: error: { UNC } [ 2201.016421] ata1.00: configured for UDMA/100 [ 2201.032454] ata1.01: configured for UDMA/100 [ 2201.032482] sd 0:0:1:0: [sdb] Unhandled sense code [ 2201.032485] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2201.032490] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor] [ 2201.032497] Descriptor sense data with sense descriptors (in hex): [ 2201.032501] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 2201.032512] 0f 10 b9 6f [ 2201.032517] sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed [ 2201.032524] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 0f 10 b9 68 00 00 08 00 [ 2201.032535] end_request: I/O error, dev sdb, sector 252754287 [ 2201.032594] ata1: EH complete [ 2201.035172] __ratelimit: 6 callbacks suppressed [ 2201.035179] cpio[6708]: segfault at 9a63000 ip 00c56fc6 sp bfd74198 error 4 in libc-2.11.1.so[be2000+153000]