[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-19-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #28-Ubuntu SMP Wed Mar 31 17:46:20 UTC 2010 (Ubuntu 2.6.32-19.28-generic 2.6.32.10+drm33.1) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077e70000 (usable) [ 0.000000] BIOS-e820: 0000000077e70000 - 0000000077e80000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077e80000 - 0000000077f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077f00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x77e70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0078000000 mask FFF8000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000077e70000 (usable) [ 0.000000] modified: 0000000077e70000 - 0000000077e80000 (ACPI data) [ 0.000000] modified: 0000000077e80000 - 0000000077f00000 (ACPI NVS) [ 0.000000] modified: 0000000077f00000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 7758c000 - 77e5f7be [ 0.000000] Allocated new RAMDISK: 008dc000 - 011af7be [ 0.000000] Move RAMDISK from 000000007758c000 - 0000000077e5f7bd to 008dc000 - 011af7bd [ 0.000000] ACPI: RSDP 000f8500 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 77e79617 00040 (v01 DELL M08 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 77e7fc36 00074 (v01 ATI Bowfin 06040000 ATI 000F4240) [ 0.000000] ACPI: DSDT 77e79657 065DF (v01 ATI SB600 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 77e90fc0 00040 [ 0.000000] ACPI: TCPA 77e7fcaa 00032 (v02 AMD 06040000 PTEC 00000000) [ 0.000000] ACPI: SSDT 77e7fcdc 000F4 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 77e7fdd0 00046 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: MCFG 77e7fe16 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 77e7fe52 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 77e7fe8a 00176 (v01 DELL M08 06040000 LTP 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1030MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d7e98] TEXT DATA BSS ==> [0000100000 - 00008d7e98] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [00008d8000 - 00008db150] BRK ==> [00008d8000 - 00008db150] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008dc000 - 00011af7be] NEW RAMDISK ==> [00008dc000 - 00011af7be] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f8530] f8530 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x00077e70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00077e70 [ 0.000000] On node 0 totalpages: 491017 [ 0.000000] free_area_init_node: node 0, pgdat c0796720, node_mem_map c11b1000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3961 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2061 pages used for memmap [ 0.000000] HighMem zone: 261733 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538310 base: 0xfed00000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s35992 r0 d21352 u4194304 [ 0.000000] pcpu-alloc: s35992 r0 d21352 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487180 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 9822400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:00077e70) [ 0.000000] Memory: 1920100k/1964480k available (4671k kernel code, 42968k reserved, 2116k data, 656k init, 1055176k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a1000 - 0xc0845000 ( 656 kB) [ 0.000000] .data : 0xc058fd43 - 0xc07a0e48 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc058fd43 (4671 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1795.482 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.96 BogoMIPS (lpj=7181928) [ 0.004026] Security Framework initialized [ 0.004048] AppArmor: AppArmor initialized [ 0.004056] Mount-cache hash table entries: 512 [ 0.004186] Initializing cgroup subsys ns [ 0.004190] Initializing cgroup subsys cpuacct [ 0.004195] Initializing cgroup subsys memory [ 0.004204] Initializing cgroup subsys devices [ 0.004207] Initializing cgroup subsys freezer [ 0.004210] Initializing cgroup subsys net_cls [ 0.004229] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004233] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004237] mce: CPU supports 5 MCE banks [ 0.004248] using C1E aware idle routine [ 0.004256] Performance Events: AMD PMU driver. [ 0.004263] ... version: 0 [ 0.004265] ... bit width: 48 [ 0.004267] ... generic registers: 4 [ 0.004270] ... value mask: 0000ffffffffffff [ 0.004272] ... max period: 00007fffffffffff [ 0.004275] ... fixed-purpose events: 0 [ 0.004277] ... event mask: 000000000000000f [ 0.004283] Checking 'hlt' instruction... OK. [ 0.020723] SMP alternatives: switching to UP code [ 0.027447] Freeing SMP alternatives: 19k freed [ 0.027466] ACPI: Core revision 20090903 [ 0.036010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036014] ftrace: allocating 21765 entries in 43 pages [ 0.040424] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.044001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.044001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.044001] ..... (found apic 0 pin 0) ... [ 0.086157] ....... works. [ 0.086159] CPU0: Mobile AMD Sempron(tm) Processor 3500+ stepping 02 [ 0.088001] Brought up 1 CPUs [ 0.088001] Total of 1 processors activated (3590.96 BogoMIPS). [ 0.088001] CPU0 attaching NULL sched-domain. [ 0.088001] devtmpfs: initialized [ 0.088001] regulator: core version 0.5 [ 0.088001] Time: 14:49:44 Date: 04/13/10 [ 0.088001] NET: Registered protocol family 16 [ 0.088001] EISA bus registered [ 0.088001] ACPI: bus type pci registered [ 0.088001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9 [ 0.088001] PCI: MCFG area at e0000000 reserved in E820 [ 0.088001] PCI: Using MMCONFIG for extended config space [ 0.088001] PCI: Using configuration type 1 for base access [ 0.088001] bio: create slab at 0 [ 0.088001] ACPI: EC: Look up EC in DSDT [ 0.089756] ACPI: BIOS _OSI(Linux) query ignored [ 0.092078] ACPI: Interpreter enabled [ 0.092084] ACPI: (supports S0 S3 S4 S5) [ 0.092105] ACPI: Using IOAPIC for interrupt routing [ 0.098342] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.100209] ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62 [ 0.100441] ACPI: No dock devices found. [ 0.101603] ACPI Error: Needed type [Reference], found [Device] f7012f90 (20090903/exresop-104) [ 0.101610] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20090903/dswexec-445) [ 0.101618] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701adc8), AE_AML_OPERAND_TYPE [ 0.101648] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.101764] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.101767] pci 0000:00:05.0: PME# disabled [ 0.101804] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.101807] pci 0000:00:06.0: PME# disabled [ 0.101873] pci 0000:00:12.0: reg 10 io port: [0x8438-0x843f] [ 0.101882] pci 0000:00:12.0: reg 14 io port: [0x8454-0x8457] [ 0.101890] pci 0000:00:12.0: reg 18 io port: [0x8430-0x8437] [ 0.101899] pci 0000:00:12.0: reg 1c io port: [0x8450-0x8453] [ 0.101907] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f] [ 0.101916] pci 0000:00:12.0: reg 24 32bit mmio: [0xc0004000-0xc00043ff] [ 0.101938] pci 0000:00:12.0: set SATA to AHCI mode [ 0.101994] pci 0000:00:13.0: reg 10 32bit mmio: [0xc0005000-0xc0005fff] [ 0.102060] pci 0000:00:13.1: reg 10 32bit mmio: [0xc0006000-0xc0006fff] [ 0.102126] pci 0000:00:13.2: reg 10 32bit mmio: [0xc0007000-0xc0007fff] [ 0.102192] pci 0000:00:13.3: reg 10 32bit mmio: [0xc0008000-0xc0008fff] [ 0.102258] pci 0000:00:13.4: reg 10 32bit mmio: [0xc0009000-0xc0009fff] [ 0.102345] pci 0000:00:13.5: reg 10 32bit mmio: [0xc0004400-0xc00044ff] [ 0.102408] pci 0000:00:13.5: supports D1 D2 [ 0.102410] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.102415] pci 0000:00:13.5: PME# disabled [ 0.102468] pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f] [ 0.102476] pci 0000:00:14.0: reg 14 32bit mmio: [0xfed00000-0xfed003ff] [ 0.102565] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7] [ 0.102573] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7] [ 0.102582] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.102590] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.104005] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f] [ 0.104096] pci 0000:00:14.2: reg 10 64bit mmio: [0xc0000000-0xc0003fff] [ 0.104153] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.104158] pci 0000:00:14.2: PME# disabled [ 0.104369] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xc8000000-0xcfffffff] [ 0.104374] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff] [ 0.104378] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff] [ 0.104388] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.104397] pci 0000:01:05.0: supports D1 D2 [ 0.104413] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.104417] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff] [ 0.104421] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff] [ 0.104474] pci 0000:00:05.0: bridge io port: [0x00-0xfff] [ 0.104477] pci 0000:00:05.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.104525] pci 0000:05:00.0: reg 10 32bit mmio: [0xc0200000-0xc0203fff] [ 0.104591] pci 0000:05:00.0: supports D1 D2 [ 0.104658] pci 0000:00:06.0: bridge 32bit mmio: [0xc0200000-0xc02fffff] [ 0.104709] pci 0000:08:00.0: reg 10 32bit mmio: [0xc0300000-0xc0301fff] [ 0.104778] pci 0000:08:00.0: supports D1 D2 [ 0.104781] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.104787] pci 0000:08:00.0: PME# disabled [ 0.104837] pci 0000:08:01.0: reg 10 32bit mmio: [0xc0302800-0xc03028ff] [ 0.104906] pci 0000:08:01.0: supports D1 D2 [ 0.104909] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.104915] pci 0000:08:01.0: PME# disabled [ 0.104965] pci 0000:08:01.1: reg 10 32bit mmio: [0xc0302c00-0xc0302cff] [ 0.105034] pci 0000:08:01.1: supports D1 D2 [ 0.105036] pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.105042] pci 0000:08:01.1: PME# disabled [ 0.105117] pci 0000:00:14.4: transparent bridge [ 0.105127] pci 0000:00:14.4: bridge 32bit mmio: [0xc0300000-0xc03fffff] [ 0.105146] pci_bus 0000:00: on NUMA node 0 [ 0.105151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.105278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.105354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 0.105460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.105524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.105654] ACPI Error: Needed type [Reference], found [Device] f7012f90 (20090903/exresop-104) [ 0.105661] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20090903/dswexec-445) [ 0.105668] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701adc8), AE_AML_OPERAND_TYPE [ 0.110244] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 0.110356] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 0.110466] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.110575] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 0.110685] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 0.110794] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 0.110907] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.111016] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 0.111126] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 0.111236] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.111240] vgaarb: loaded [ 0.111369] SCSI subsystem initialized [ 0.111441] libata version 3.00 loaded. [ 0.111525] usbcore: registered new interface driver usbfs [ 0.111538] usbcore: registered new interface driver hub [ 0.111563] usbcore: registered new device driver usb [ 0.111705] ACPI: WMI: Mapper loaded [ 0.111708] PCI: Using ACPI for IRQ routing [ 0.111714] pci 0000:00:05.0: BAR 13: can't allocate resource [ 0.111716] pci 0000:00:05.0: BAR 14: can't allocate resource [ 0.111891] NetLabel: Initializing [ 0.111893] NetLabel: domain hash size = 128 [ 0.111895] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.111910] NetLabel: unlabeled traffic allowed by default [ 0.111948] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.111954] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.113010] Switching to clocksource tsc [ 0.115032] AppArmor: AppArmor Filesystem Enabled [ 0.115043] pnp: PnP ACPI init [ 0.115043] ACPI: bus type pnp registered [ 0.116576] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling [ 0.117271] pnp: PnP ACPI: found 11 devices [ 0.117274] ACPI: ACPI bus type pnp unregistered [ 0.117277] PnPBIOS: Disabled by ACPI PNP [ 0.117293] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.117297] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.117301] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.117310] system 00:08: ioport range 0x1080-0x1080 has been reserved [ 0.117313] system 00:08: ioport range 0x220-0x22f has been reserved [ 0.117317] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.117320] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.117324] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.117327] system 00:08: ioport range 0x530-0x537 has been reserved [ 0.117330] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.117334] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.117337] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 0.117341] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.117344] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.117348] system 00:08: ioport range 0xcd0-0xcd3 has been reserved [ 0.117351] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 0.117355] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.117358] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 0.117362] system 00:08: ioport range 0x8000-0x805f has been reserved [ 0.117365] system 00:08: ioport range 0xf40-0xf47 has been reserved [ 0.117369] system 00:08: ioport range 0x87f-0x87f has been reserved [ 0.117375] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.117379] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.117383] system 00:09: iomem range 0xc0004800-0xc0004bff has been reserved [ 0.117387] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.152203] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.152207] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.152211] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff [ 0.152214] pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff [ 0.152219] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 0.152223] pci 0000:00:05.0: IO window: 0x2000-0x2fff [ 0.152226] pci 0000:00:05.0: MEM window: 0x80000000-0x801fffff [ 0.152230] pci 0000:00:05.0: PREFETCH window: 0x00000080200000-0x000000803fffff [ 0.152235] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05 [ 0.152238] pci 0000:00:06.0: IO window: 0x3000-0x3fff [ 0.152242] pci 0000:00:06.0: MEM window: 0xc0200000-0xc02fffff [ 0.152245] pci 0000:00:06.0: PREFETCH window: 0x00000080400000-0x000000805fffff [ 0.152250] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08 [ 0.152252] pci 0000:00:14.4: IO window: disabled [ 0.152259] pci 0000:00:14.4: MEM window: 0xc0300000-0xc03fffff [ 0.152264] pci 0000:00:14.4: PREFETCH window: disabled [ 0.152301] pci 0000:00:05.0: enabling device (0000 -> 0003) [ 0.152305] pci 0000:00:05.0: setting latency timer to 64 [ 0.152311] pci 0000:00:06.0: setting latency timer to 64 [ 0.152320] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.152323] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.152327] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.152330] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff] [ 0.152333] pci_bus 0000:01: resource 2 pref mem [0xc8000000-0xcfffffff] [ 0.152336] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.152339] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff] [ 0.152342] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff] [ 0.152346] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff] [ 0.152349] pci_bus 0000:05: resource 1 mem: [0xc0200000-0xc02fffff] [ 0.152352] pci_bus 0000:05: resource 2 pref mem [0x80400000-0x805fffff] [ 0.152355] pci_bus 0000:08: resource 1 mem: [0xc0300000-0xc03fffff] [ 0.152358] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 0.152361] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] [ 0.152402] NET: Registered protocol family 2 [ 0.152500] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.152941] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.153742] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.154209] TCP: Hash tables configured (established 131072 bind 65536) [ 0.154212] TCP reno registered [ 0.154345] NET: Registered protocol family 1 [ 0.154361] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.154443] pci 0000:01:05.0: Boot video device [ 0.154668] cpufreq-nforce2: No nForce2 chipset. [ 0.154696] Scanning for low memory corruption every 60 seconds [ 0.154836] audit: initializing netlink socket (disabled) [ 0.154851] type=2000 audit(1271170182.153:1): initialized [ 0.166159] Trying to unpack rootfs image as initramfs... [ 2.607103] highmem bounce pool size: 64 pages [ 2.607111] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.608715] VFS: Disk quotas dquot_6.5.2 [ 2.608773] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.609387] fuse init (API version 7.13) [ 2.609476] msgmni has been set to 1691 [ 2.609679] alg: No test for stdrng (krng) [ 2.609741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.609745] io scheduler noop registered [ 2.609747] io scheduler anticipatory registered [ 2.609749] io scheduler deadline registered [ 2.609793] io scheduler cfq registered (default) [ 2.609971] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.609998] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.610606] ACPI: AC Adapter [ACAD] (off-line) [ 2.610679] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.610684] ACPI: Power Button [PWRB] [ 2.610745] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.610752] ACPI: Sleep Button [SLPB] [ 2.610800] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 2.611297] ACPI: Lid Switch [LID] [ 2.611374] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.611379] ACPI: Power Button [PWRF] [ 2.611603] Marking TSC unstable due to TSC halts in idle [ 2.611646] processor LNXCPU:00: registered as cooling_device0 [ 2.616243] Switching to clocksource hpet [ 2.617418] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.617432] ACPI: Thermal Zone [THRM] (37 C) [ 2.619163] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.624608] brd: module loaded [ 2.625097] loop: module loaded [ 2.625211] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 2.625374] alloc irq_desc for 16 on node -1 [ 2.625377] alloc kstat_irqs on node -1 [ 2.625386] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.625431] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 2.625765] Fixed MDIO Bus: probed [ 2.625804] PPP generic driver version 2.4.2 [ 2.625842] tun: Universal TUN/TAP device driver, 1.6 [ 2.625845] tun: (C) 1999-2004 Max Krasnyansky [ 2.625924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.625945] alloc irq_desc for 19 on node -1 [ 2.625947] alloc kstat_irqs on node -1 [ 2.625952] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.625973] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 2.626009] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 2.626037] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 2.626053] ehci_hcd 0000:00:13.5: debug port 1 [ 2.626081] ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400 [ 2.626242] isapnp: Scanning for PnP cards... [ 2.636112] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 2.636267] usb usb1: configuration #1 chosen from 1 choice [ 2.636301] hub 1-0:1.0: USB hub found [ 2.636313] hub 1-0:1.0: 10 ports detected [ 2.636410] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.636432] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.636454] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.636516] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 2.636549] ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000 [ 2.692201] usb usb2: configuration #1 chosen from 1 choice [ 2.692234] hub 2-0:1.0: USB hub found [ 2.692247] hub 2-0:1.0: 2 ports detected [ 2.692306] alloc irq_desc for 17 on node -1 [ 2.692308] alloc kstat_irqs on node -1 [ 2.692315] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.692338] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.692388] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 2.692419] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000 [ 2.772751] usb usb3: configuration #1 chosen from 1 choice [ 2.772784] hub 3-0:1.0: USB hub found [ 2.772799] hub 3-0:1.0: 2 ports detected [ 2.772859] alloc irq_desc for 18 on node -1 [ 2.772862] alloc kstat_irqs on node -1 [ 2.772869] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.772890] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 2.772937] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 2.772968] ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000 [ 2.773538] Freeing initrd memory: 9037k freed [ 2.866505] usb usb4: configuration #1 chosen from 1 choice [ 2.866538] hub 4-0:1.0: USB hub found [ 2.866553] hub 4-0:1.0: 2 ports detected [ 2.866616] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.866640] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 2.866686] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 2.866708] ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000 [ 2.953843] usb usb5: configuration #1 chosen from 1 choice [ 2.953871] hub 5-0:1.0: USB hub found [ 2.953882] hub 5-0:1.0: 2 ports detected [ 2.953930] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.953942] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 2.953979] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 2.953996] ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000 [ 3.041064] isapnp: No Plug & Play device found [ 3.041166] usb usb6: configuration #1 chosen from 1 choice [ 3.041193] hub 6-0:1.0: USB hub found [ 3.041205] hub 6-0:1.0: 2 ports detected [ 3.041264] uhci_hcd: USB Universal Host Controller Interface driver [ 3.041356] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 3.045550] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.045557] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.045701] mice: PS/2 mouse device common for all mice [ 3.045873] rtc_cmos 00:04: RTC can wake from S4 [ 3.045917] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 3.045950] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 3.046068] device-mapper: uevent: version 1.0.3 [ 3.046202] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 3.046257] device-mapper: multipath: version 1.1.0 loaded [ 3.046260] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.046387] EISA: Probing bus 0 at eisa.0 [ 3.046395] Cannot allocate resource for EISA slot 1 [ 3.046397] Cannot allocate resource for EISA slot 2 [ 3.046400] Cannot allocate resource for EISA slot 3 [ 3.046419] Cannot allocate resource for EISA slot 8 [ 3.046422] EISA: Detected 0 cards. [ 3.046518] cpuidle: using governor ladder [ 3.046589] cpuidle: using governor menu [ 3.047054] TCP cubic registered [ 3.047246] NET: Registered protocol family 10 [ 3.047749] lo: Disabled Privacy Extensions [ 3.048197] NET: Registered protocol family 17 [ 3.048230] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3500+ processors (1 cpu cores) (version 2.20.00) [ 3.048270] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xe [ 3.048272] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x10 [ 3.048275] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x18 [ 3.048318] Using IPI No-Shortcut mode [ 3.048412] PM: Resume from disk failed. [ 3.048426] registered taskstats version 1 [ 3.048810] Magic number: 6:236:839 [ 3.048913] rtc_cmos 00:04: setting system clock to 2010-04-13 14:49:47 UTC (1271170187) [ 3.048916] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.048918] EDD information not available. [ 3.077653] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 3.256208] ACPI: Battery Slot [BAT1] (battery present) [ 3.620341] Freeing unused kernel memory: 656k freed [ 3.620817] Write protecting the kernel text: 4672k [ 3.620851] Write protecting the kernel read-only data: 1836k [ 3.647690] udev: starting version 151 [ 3.832048] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 3.898387] scsi0 : pata_atiixp [ 3.898552] scsi1 : pata_atiixp [ 3.899341] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14 [ 3.899345] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15 [ 3.899397] ahci 0000:00:12.0: version 3.0 [ 3.899414] alloc irq_desc for 22 on node -1 [ 3.899417] alloc kstat_irqs on node -1 [ 3.899425] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3.899460] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 3.899562] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 3.899567] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc [ 3.906678] Linux agpgart interface v0.103 [ 3.906694] scsi2 : ahci [ 3.906877] scsi3 : ahci [ 3.911941] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.911954] b43-pci-bridge 0000:05:00.0: setting latency timer to 64 [ 3.911978] scsi4 : ahci [ 3.912144] scsi5 : ahci [ 3.912285] ata3: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004100 irq 22 [ 3.912290] ata4: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004180 irq 22 [ 3.912295] ata5: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004200 irq 22 [ 3.912299] ata6: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004280 irq 22 [ 3.968130] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 3.999017] usb 1-3: configuration #1 chosen from 1 choice [ 4.008446] Initializing USB Mass Storage driver... [ 4.008574] scsi6 : SCSI emulation for USB Mass Storage devices [ 4.008717] usbcore: registered new interface driver usb-storage [ 4.008720] USB Mass Storage support registered. [ 4.008810] usb-storage: device found at 2 [ 4.008812] usb-storage: waiting for device to settle before scanning [ 4.064603] ata1.00: ATAPI: Optiarc DVD+/-RW AD-5540A, 102C, max UDMA/33 [ 4.080539] ata1.00: configured for UDMA/33 [ 4.082013] scsi 0:0:0:0: CD-ROM Optiarc DVD+-RW AD-5540A 102C PQ: 0 ANSI: 5 [ 4.085194] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 4.085198] Uniform CD-ROM driver Revision: 3.20 [ 4.085440] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 4.085564] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 4.108050] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 4.232060] ata6: SATA link down (SStatus 0 SControl 300) [ 4.232097] ata4: SATA link down (SStatus 0 SControl 300) [ 4.232130] ata5: SATA link down (SStatus 0 SControl 300) [ 4.241528] usb 1-5: configuration #1 chosen from 1 choice [ 4.241879] hub 1-5:1.0: USB hub found [ 4.242199] hub 1-5:1.0: 4 ports detected [ 4.396041] ata3: softreset failed (device not ready) [ 4.396046] ata3: applying SB600 PMP SRST workaround and retrying [ 4.512378] usb 1-5.3: new low speed USB device using ehci_hcd and address 4 [ 4.560046] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.611846] usb 1-5.3: configuration #1 chosen from 1 choice [ 4.684264] usb 1-5.4: new high speed USB device using ehci_hcd and address 5 [ 4.777257] usb 1-5.4: configuration #1 chosen from 1 choice [ 4.779117] scsi7 : SCSI emulation for USB Mass Storage devices [ 4.779446] usb-storage: device found at 5 [ 4.779448] usb-storage: waiting for device to settle before scanning [ 4.907381] ata3.00: ATA-7: WDC WD800BEVS-75RST0, 04.01G04, max UDMA/133 [ 4.907385] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.907410] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 4.908344] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 4.908348] ata3.00: configured for UDMA/133 [ 4.908464] scsi 2:0:0:0: Direct-Access ATA WDC WD800BEVS-75 04.0 PQ: 0 ANSI: 5 [ 4.908632] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 4.908932] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 4.908980] sd 2:0:0:0: [sda] Write Protect is off [ 4.908984] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.909008] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.909148] sda: sda1 sda2 sda3 sda4 [ 4.938267] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.977806] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 4.985217] alloc irq_desc for 21 on node -1 [ 4.985221] alloc kstat_irqs on node -1 [ 4.985229] b44 0000:08:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.985678] [drm] Initialized drm 1.1.0 20060810 [ 5.033861] usbcore: registered new interface driver hiddev [ 5.048150] input: Acrox USB & PS/2 Mouse as /devices/pci0000:00/0000:00:13.5/usb1/1-5/1-5.3/1-5.3:1.0/input/input6 [ 5.048265] generic-usb 0003:0F62:1001.0001: input,hidraw0: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:13.5-5.3/input0 [ 5.048300] usbcore: registered new interface driver usbhid [ 5.048303] usbhid: v2.6:USB HID core driver [ 5.087004] acpi device:1c: registered as cooling_device1 [ 5.087263] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input7 [ 5.087362] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 5.088650] [drm] radeon kernel modesetting enabled. [ 5.088745] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 5.088755] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.095488] [drm] radeon: Initializing kernel modesetting. [ 5.095850] [drm] register mmio base: 0xC0100000 [ 5.095853] [drm] register mmio size: 65536 [ 5.096172] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 5.096250] ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0 [ 5.096276] b44.c:v2.0 [ 5.096462] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?) [ 5.096467] [drm] Generation 2 PCI interface, using max accessible memory [ 5.096470] [drm] radeon: VRAM 128M [ 5.096472] [drm] radeon: VRAM from 0x78000000 to 0x7FFFFFFF [ 5.096474] [drm] radeon: GTT 32M [ 5.096476] [drm] radeon: GTT from 0x80000000 to 0x81FFFFFF [ 5.096497] [drm] radeon: irq initialized. [ 5.096600] [drm] Detected VRAM RAM=128M, BAR=128M [ 5.096605] [drm] RAM width 128bits DDR [ 5.096702] [TTM] Zone kernel: Available graphics memory: 437818 kiB. [ 5.096704] [TTM] Zone highmem: Available graphics memory: 965406 kiB. [ 5.096723] [drm] radeon: 128M of VRAM memory ready [ 5.096725] [drm] radeon: 32M of GTT memory ready. [ 5.096744] [drm] GART: num cpu pages 8192, num gpu pages 8192 [ 5.097192] [drm] radeon: 3 quad pipes, 1 z pipes initialized. [ 5.097205] [drm] radeon: cp idle (0x10000C03) [ 5.097246] [drm] Loading R300 Microcode [ 5.097497] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 5.100875] [drm] radeon: ring at 0x0000000080000000 [ 5.100895] [drm] ring test succeeded in 1 usecs [ 5.101028] [drm] radeon: ib pool ready. [ 5.101093] [drm] ib test succeeded in 0 usecs [ 5.101207] [drm] Panel ID String: LPL [ 5.101210] [drm] Panel Size 1280x800 [ 5.101255] [drm] Radeon Display Connectors [ 5.101257] [drm] Connector 0: [ 5.101259] [drm] VGA [ 5.101262] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 5.101264] [drm] Encoders: [ 5.101265] [drm] CRT1: INTERNAL_DAC2 [ 5.101267] [drm] Connector 1: [ 5.101269] [drm] LVDS [ 5.101272] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [ 5.101274] [drm] Encoders: [ 5.101276] [drm] LCD1: INTERNAL_LVDS [ 5.118778] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:54:68:dd [ 5.235785] composite sync not supported [ 5.244130] [drm] fb mappable at 0xC8040000 [ 5.244133] [drm] vram apper at 0xC8000000 [ 5.244135] [drm] size 4096000 [ 5.244137] [drm] fb depth is 24 [ 5.244138] [drm] pitch is 5120 [ 5.244613] fb0: radeondrmfb frame buffer device [ 5.244615] registered panic notifier [ 5.244621] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 [ 5.247425] vga16fb: initializing [ 5.247431] vga16fb: mapped to 0xc00a0000 [ 5.247437] vga16fb: not registering due to another framebuffer present [ 5.289547] Console: switching to colour frame buffer device 160x50 [ 5.696473] composite sync not supported [ 5.828403] xor: automatically using best checksumming function: pIII_sse [ 5.848011] pIII_sse : 5449.000 MB/sec [ 5.848015] xor: using function: pIII_sse (5449.000 MB/sec) [ 5.851751] device-mapper: dm-raid45: initialized v0.2594b [ 5.959254] kjournald starting. Commit interval 5 seconds [ 5.959266] EXT3-fs: mounted filesystem with ordered data mode. [ 6.387082] kjournald starting. Commit interval 5 seconds [ 6.387094] EXT3-fs: mounted filesystem with ordered data mode. [ 9.009066] usb-storage: device scan complete [ 9.030607] scsi 6:0:0:0: Direct-Access 8.07 PQ: 0 ANSI: 2 [ 9.031554] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 9.032851] sd 6:0:0:0: [sdb] 2002944 512-byte logical blocks: (1.02 GB/978 MiB) [ 9.033343] sd 6:0:0:0: [sdb] Write Protect is off [ 9.033347] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9.033350] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 9.036354] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 9.036358] sdb: sdb1 [ 9.038849] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 9.038855] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 9.776225] usb-storage: device scan complete [ 9.776838] scsi 7:0:0:0: Direct-Access Maxtor Basics Desktop 0122 PQ: 0 ANSI: 4 [ 9.777915] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 9.778329] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 9.778947] sd 7:0:0:0: [sdc] Write Protect is off [ 9.778952] sd 7:0:0:0: [sdc] Mode Sense: 2d 08 00 00 [ 9.778955] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 9.780332] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 9.780338] sdc: sdc1 sdc2 [ 9.817957] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 9.817962] sd 7:0:0:0: [sdc] Attached SCSI disk [ 9.874874] aufs 2-standalone.tree-20091207 [ 10.143670] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 11.406724] kjournald starting. Commit interval 5 seconds [ 11.407712] EXT3 FS on loop1, internal journal [ 11.407717] EXT3-fs: mounted filesystem with ordered data mode. [ 11.423808] aufs test_add:243:exe[888]: uid/gid/perm //filesystem.squashfs 0/0/0755, 1000/1000/0755 [ 25.058441] Adding 1767140k swap on /dev/sda3. Priority:-1 extents:1 across:1767140k [ 25.303378] udev: starting version 151 [ 26.182769] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 26.188370] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 26.351915] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0 [ 26.357433] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.418512] ricoh-mmc: Ricoh MMC Controller disabling driver [ 26.418516] ricoh-mmc: Copyright(c) Philip Langdale [ 26.418546] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.1 [1180:0843] (rev 1) [ 26.418554] ricoh-mmc: Main Ricoh function not found. Cannot disable controller. [ 26.518498] sdhci: Secure Digital Host Controller Interface driver [ 26.518503] sdhci: Copyright(c) Pierre Ossman [ 26.557234] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 26.558722] sdhci-pci 0000:08:01.0: SDHCI controller found [1180:0822] (rev 19) [ 26.558746] alloc irq_desc for 20 on node -1 [ 26.558749] alloc kstat_irqs on node -1 [ 26.558758] sdhci-pci 0000:08:01.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 26.598582] Registered led device: mmc0:: [ 26.599685] mmc0: SDHCI controller on PCI [0000:08:01.0] using PIO [ 26.778880] cfg80211: Calling CRDA to update world regulatory domain [ 27.104437] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.132599] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 27.173829] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000 [ 27.211293] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 27.224730] cfg80211: World regulatory domain updated: [ 27.224736] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.224740] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.224743] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.224747] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.224750] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.224753] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.356375] phy0: Selected rate control algorithm 'minstrel' [ 27.357158] Registered led device: b43-phy0::tx [ 27.357178] Registered led device: b43-phy0::rx [ 27.357198] Registered led device: b43-phy0::radio [ 27.357284] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 27.492073] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 27.581415] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 27.597235] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 27.597241] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 27.597245] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 27.620169] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 27.643782] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 27.649570] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 27.649576] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 27.649580] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 27.689006] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 27.849040] input: HDA ATI SB Mic at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 27.849294] input: HDA ATI SB HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 29.234784] lp: driver loaded but no devices found [ 29.349310] composite sync not supported [ 29.352288] ppdev: user-space parallel port driver [ 29.540199] composite sync not supported [ 30.816211] b44: eth0: Link is up at 100 Mbps, full duplex. [ 30.816215] b44: eth0: Flow control is off for TX and off for RX. [ 30.816559] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 35.519097] composite sync not supported [ 35.576100] composite sync not supported [ 35.661317] composite sync not supported [ 41.420020] eth0: no IPv6 routers present [ 68.524358] composite sync not supported [ 111.640947] composite sync not supported [ 111.664876] composite sync not supported [ 116.678055] composite sync not supported [ 116.703830] composite sync not supported [ 116.729177] composite sync not supported [ 132.872089] composite sync not supported [ 133.225177] composite sync not supported [ 140.752445] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.