Normal Boot: [4294667.296000] Linux version 2.6.15-23-686 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 14:03:07 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [4294667.296000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) [4294667.296000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [4294667.296000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [4294667.296000] 127MB HIGHMEM available. [4294667.296000] 896MB LOWMEM available. [4294667.296000] found SMP MP-table at 000ff780 [4294667.296000] On node 0 totalpages: 262064 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 225280 pages, LIFO batch:31 [4294667.296000] HighMem zone: 32688 pages, LIFO batch:7 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fad80 [4294667.296000] ACPI: RSDT (v001 A M I OEMRSDT 0x02000425 MSFT 0x00000097) @ 0x3ffb0000 [4294667.296000] ACPI: FADT (v002 A M I OEMFACP 0x02000425 MSFT 0x00000097) @ 0x3ffb0200 [4294667.296000] ACPI: MADT (v001 A M I OEMAPIC 0x02000425 MSFT 0x00000097) @ 0x3ffb0390 [4294667.296000] ACPI: OEMB (v001 A M I OEMBIOS 0x02000425 MSFT 0x00000097) @ 0x3ffc0040 [4294667.296000] ACPI: DSDT (v001 A0030 A0030006 0x00000006 INTL 0x02002026) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x808 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [4294667.296000] Processor #0 15:2 APIC version 20 [4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [4294667.296000] Processor #1 15:2 APIC version 20 [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/sdb1 ro quiet splash [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) [4294667.296000] Detected 2798.598 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294669.909000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294669.910000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294669.940000] Memory: 1026964k/1048256k available (2101k kernel code, 20592k reserved, 592k data, 332k init, 130752k highmem) [4294669.940000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294670.000000] Calibrating delay using timer specific routine.. 5600.97 BogoMIPS (lpj=2800486) [4294670.000000] Security Framework v1.0.0 initialized [4294670.000000] SELinux: Disabled at boot. [4294670.000000] Mount-cache hash table entries: 512 [4294670.000000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [4294670.000000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [4294670.000000] CPU: Trace cache: 12K uops, L1 D cache: 8K [4294670.000000] CPU: L2 cache: 512K [4294670.000000] CPU: Hyper-Threading is disabled [4294670.000000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 [4294670.000000] mtrr: v2.0 (20020519) [4294670.000000] Enabling fast FPU save and restore... done. [4294670.000000] Enabling unmasked SIMD FPU exception support... done. [4294670.000000] Checking 'hlt' instruction... OK. [4294670.004000] SMP alternatives: switching to UP code [4294670.004000] checking if image is initramfs... it is [4294670.470000] Freeing initrd memory: 6798k freed [4294670.477000] ACPI: Looking for DSDT ... not found! [4294670.892000] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 [4294670.893000] SMP alternatives: switching to SMP code [4294670.893000] Booting processor 1/1 eip 3000 [4294670.903000] Initializing CPU#1 [4294670.964000] Calibrating delay using timer specific routine.. 5596.58 BogoMIPS (lpj=2798291) [4294670.964000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [4294670.964000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [4294670.964000] CPU: Trace cache: 12K uops, L1 D cache: 8K [4294670.964000] CPU: L2 cache: 512K [4294670.964000] CPU: Hyper-Threading is disabled [4294670.964000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 [4294670.964000] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 [4294670.964000] Total of 2 processors activated (11197.55 BogoMIPS). [4294670.964000] ENABLING IO-APIC IRQs [4294670.964000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294671.075000] checking TSC synchronization across 2 CPUs: passed. [4294671.076000] Brought up 2 CPUs [4294671.076000] NET: Registered protocol family 16 [4294671.076000] EISA bus registered [4294671.076000] ACPI: bus type pci registered [4294671.076000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [4294671.076000] PCI: Using configuration type 1 [4294671.077000] ACPI: Subsystem revision 20051216 [4294671.083000] ACPI: Interpreter enabled [4294671.083000] ACPI: Using IOAPIC for interrupt routing [4294671.084000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294671.084000] PCI: Probing PCI hardware (bus 00) [4294671.087000] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [4294671.087000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO [4294671.087000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [4294671.087000] Boot video device is 0000:01:00.0 [4294671.088000] PCI: Transparent bridge - 0000:00:1e.0 [4294671.088000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294671.096000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [4294671.103000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [4294671.103000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [4294671.103000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [4294671.103000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [4294671.104000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [4294671.104000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [4294671.104000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [4294671.104000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [4294671.104000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294671.104000] pnp: PnP ACPI init [4294671.109000] pnp: PnP ACPI: found 12 devices [4294671.109000] ASUS P4P800 detected. Disabling PnPBIOS [4294671.109000] PnPBIOS: Disabled [4294671.109000] PCI: Using ACPI for IRQ routing [4294671.109000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294671.115000] pnp: 00:08: ioport range 0x680-0x6ff has been reserved [4294671.115000] pnp: 00:08: ioport range 0x290-0x297 has been reserved [4294671.115000] PCI: Bridge: 0000:00:01.0 [4294671.115000] IO window: disabled. [4294671.115000] MEM window: f3d00000-f7dfffff [4294671.115000] PREFETCH window: d3b00000-f3afffff [4294671.115000] PCI: Bridge: 0000:00:1e.0 [4294671.115000] IO window: d000-dfff [4294671.115000] MEM window: f7e00000-f7efffff [4294671.115000] PREFETCH window: f3b00000-f3bfffff [4294671.115000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [4294671.116000] audit: initializing netlink socket (disabled) [4294671.116000] audit(1149190993.114:1): initialized [4294671.116000] highmem bounce pool size: 64 pages [4294671.116000] VFS: Disk quotas dquot_6.5.1 [4294671.116000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294671.116000] Initializing Cryptographic API [4294671.116000] io scheduler noop registered [4294671.116000] io scheduler anticipatory registered [4294671.116000] io scheduler deadline registered [4294671.116000] io scheduler cfq registered [4294671.117000] isapnp: Scanning for PnP cards... [4294671.474000] isapnp: No Plug & Play device found [4294671.494000] Real Time Clock Driver v1.12 [4294671.494000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [4294671.494000] PNP: PS/2 controller doesn't have AUX irq; using default 12 [4294671.496000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294671.496000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294671.496000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294671.496000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294671.497000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [4294671.499000] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294671.499000] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [4294671.500000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294671.500000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294671.500000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294671.500000] mice: PS/2 mouse device common for all mice [4294671.501000] EISA: Probing bus 0 at eisa.0 [4294671.501000] EISA: Detected 0 cards. [4294671.501000] NET: Registered protocol family 2 [4294671.514000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [4294671.514000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes) [4294671.516000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [4294671.517000] TCP: Hash tables configured (established 262144 bind 65536) [4294671.517000] TCP reno registered [4294671.517000] TCP bic registered [4294671.517000] NET: Registered protocol family 1 [4294671.517000] NET: Registered protocol family 8 [4294671.517000] NET: Registered protocol family 20 [4294671.517000] Starting balanced_irq [4294671.517000] Using IPI No-Shortcut mode [4294671.518000] ACPI wakeup devices: [4294671.518000] P0P4 MC97 USB1 USB2 USB3 USB4 EUSB PS2K ILAN [4294671.518000] ACPI: (supports S0 S1 S3 S4 S5) [4294671.518000] Freeing unused kernel memory: 332k freed [4294671.573000] vga16fb: initializing [4294671.573000] vga16fb: mapped to 0xc00a0000 [4294671.775000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294671.966000] Console: switching to colour frame buffer device 80x25 [4294671.966000] fb0: VGA16 VGA frame buffer device [4294673.001000] Capability LSM initialized [4294673.955000] SCSI subsystem initialized [4294673.958000] ACPI: bus type scsi registered [4294673.958000] libata version 1.20 loaded. [4294673.960000] sata_promise 0000:02:04.0: version 1.03 [4294673.960000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 23 (level, low) -> IRQ 169 [4294673.960000] sata_promise PATA port found [4294673.972000] ata1: SATA max UDMA/133 cmd 0xF8866200 ctl 0xF8866238 bmdma 0x0 irq 169 [4294673.972000] ata2: SATA max UDMA/133 cmd 0xF8866280 ctl 0xF88662B8 bmdma 0x0 irq 169 [4294673.972000] ata3: PATA max UDMA/133 cmd 0xF8866300 ctl 0xF8866338 bmdma 0x0 irq 169 [4294674.173000] ata1: no device found (phy stat 00000000) [4294674.174000] scsi0 : sata_promise [4294674.532000] ata2: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f 93:0000 [4294674.532000] ata2: dev 0 ATA-7, max UDMA/133, 240121728 sectors: LBA [4294674.532000] sata_get_dev_handle: SATA dev addr=0x40000, handle=0x00000000 [4294674.532000] ata2: dev 0 configured for UDMA/133 [4294674.532000] sata_get_dev_handle: SATA dev addr=0x40000, handle=0x00000000 [4294674.532000] scsi1 : sata_promise [4294675.834000] ata3: disabling port [4294675.834000] scsi2 : sata_promise [4294675.834000] Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 [4294675.834000] Type: Direct-Access ANSI SCSI revision: 05 [4294675.843000] Driver 'sd' needs updating - please use bus_type methods [4294675.844000] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) [4294675.844000] SCSI device sda: drive cache: write back [4294675.845000] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) [4294675.845000] SCSI device sda: drive cache: write back [4294675.845000] sda: sda1 sda2 [4294675.863000] sd 1:0:0:0: Attached scsi disk sda [4294678.436000] ICH5: IDE controller at PCI slot 0000:00:1f.1 [4294678.436000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [4294678.436000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177 [4294678.436000] ICH5: chipset revision 2 [4294678.436000] ICH5: not 100% native mode: will probe irqs later [4294678.436000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA [4294678.436000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio [4294678.437000] Probing IDE interface ide0... [4294679.365000] hdb: PIONEER DVD-RW DVR-109, ATAPI CD/DVD-ROM drive [4294679.417000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294679.419000] Probing IDE interface ide1... [4294679.948000] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33) [4294679.948000] Uniform CD-ROM driver Revision: 3.20 [4294680.020000] ata_piix 0000:00:1f.2: version 1.05 [4294680.020000] ata_pci_init_one: pci_dev class+intf: 0x1018f [4294680.020000] ata_pci_init_one: NO_LEGACY == 0 [4294680.020000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177 [4294680.020000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [4294680.020000] ata4: PATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 177 [4294680.020000] ata5: PATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF68 irq 177 [4294680.176000] ata4: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:207f 93:0000 [4294680.176000] ata4: dev 0 ATA-7, max UDMA/133, 240121728 sectors: LBA [4294680.176000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xc1a28d00 [4294680.181000] ata4: dev 0 configured for UDMA/133 [4294680.181000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xc1a28d00 [4294680.185000] scsi3 : ata_piix [4294680.341000] ata5: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:207f 93:0000 [4294680.341000] ata5: dev 0 ATA-7, max UDMA/133, 240121728 sectors: LBA [4294680.341000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xc1a28d00 [4294680.346000] ata5: dev 0 configured for UDMA/133 [4294680.346000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xc1a28d00 [4294680.350000] scsi4 : ata_piix [4294680.351000] Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 [4294680.351000] Type: Direct-Access ANSI SCSI revision: 05 [4294680.351000] SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB) [4294680.351000] SCSI device sdb: drive cache: write back [4294680.351000] SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB) [4294680.351000] SCSI device sdb: drive cache: write back [4294680.351000] sdb: sdb1 sdb2 sdb3 sdb4 [4294680.365000] sd 3:0:0:0: Attached scsi disk sdb [4294680.365000] Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 [4294680.365000] Type: Direct-Access ANSI SCSI revision: 05 [4294680.365000] SCSI device sdc: 240121728 512-byte hdwr sectors (122942 MB) [4294680.365000] SCSI device sdc: drive cache: write back [4294680.365000] SCSI device sdc: 240121728 512-byte hdwr sectors (122942 MB) [4294680.365000] SCSI device sdc: drive cache: write back [4294680.365000] sdc: sdc1 [4294680.386000] sd 4:0:0:0: Attached scsi disk sdc [4294680.874000] usbcore: registered new driver usbfs [4294680.874000] usbcore: registered new driver hub [4294680.876000] USB Universal Host Controller Interface driver v2.3 [4294680.876000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 185 [4294680.876000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4294680.876000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [4294680.876000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [4294680.876000] uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000ef00 [4294680.876000] hub 1-0:1.0: USB hub found [4294680.877000] hub 1-0:1.0: 2 ports detected [4294680.950000] ieee1394: Initialized config rom entry `ip1394' [4294680.979000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 193 [4294680.979000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4294680.979000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [4294680.979000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [4294680.979000] uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000ef20 [4294680.979000] hub 2-0:1.0: USB hub found [4294680.979000] hub 2-0:1.0: 2 ports detected [4294681.081000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177 [4294681.081000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [4294681.081000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [4294681.081000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [4294681.081000] uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000ef40 [4294681.081000] hub 3-0:1.0: USB hub found [4294681.081000] hub 3-0:1.0: 2 ports detected [4294681.183000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 185 [4294681.183000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [4294681.183000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [4294681.183000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [4294681.183000] uhci_hcd 0000:00:1d.3: irq 185, io base 0x0000ef80 [4294681.183000] hub 4-0:1.0: USB hub found [4294681.183000] hub 4-0:1.0: 2 ports detected [4294681.185000] usb 1-1: new full speed USB device using uhci_hcd and address 2 [4294681.285000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 169 [4294681.285000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [4294681.285000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [4294681.285000] ehci_hcd 0000:00:1d.7: debug port 1 [4294681.285000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [4294681.285000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [4294681.285000] ehci_hcd 0000:00:1d.7: irq 169, io mem 0xf7fffc00 [4294681.289000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294681.290000] hub 5-0:1.0: USB hub found [4294681.290000] hub 5-0:1.0: 8 ports detected [4294681.392000] ohci1394: $Rev: 1313 $ Ben Collins