[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-13-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu7) ) #44-Ubuntu SMP Sat Oct 10 15:27:55 UTC 2009 (Ubuntu 2.6.31-13.44-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000017fc0000 (usable) [ 0.000000] BIOS-e820: 0000000017fc0000 - 0000000017ff8000 (ACPI data) [ 0.000000] BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x17fc0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 010000000 mask FF8000000 write-back [ 0.000000] 2 base 018000000 mask FFFF00000 write-back [ 0.000000] 3 base 018000000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000017fc0000 (usable) [ 0.000000] modified: 0000000017fc0000 - 0000000017ff8000 (ACPI data) [ 0.000000] modified: 0000000017ff8000 - 0000000018000000 (ACPI NVS) [ 0.000000] modified: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000017fc0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0017c00000 page 2M [ 0.000000] 0017c00000 - 0017fc0000 page 4k [ 0.000000] kernel direct mapping tables up to 17fc0000 @ 7000-c000 [ 0.000000] RAMDISK: 118bc000 - 1200f063 [ 0.000000] ACPI: RSDP 000ff980 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 17ff0000 00028 (v01 D815EA D815EEA2 20021106 MSFT 00001011) [ 0.000000] ACPI: FACP 17ff1000 00074 (v01 D815EA EA81510A 20021106 MSFT 00001011) [ 0.000000] ACPI: DSDT 17fe0000 030E4 (v01 D815E2 EA81520A 00000023 MSFT 0100000B) [ 0.000000] ACPI: FACS 17ff8000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 383MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 17fc0000 [ 0.000000] low ram: 0 - 17fc0000 [ 0.000000] node 0 low ram: 00000000 - 17fc0000 [ 0.000000] node 0 bootmap 00008000 - 0000aff8 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0017fc0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000089f080] TEXT DATA BSS ==> [0000100000 - 000089f080] [ 0.000000] #4 [00118bc000 - 001200f063] RAMDISK ==> [00118bc000 - 001200f063] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008a0000 - 00008a3140] BRK ==> [00008a0000 - 00008a3140] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000b000] BOOTMAP ==> [0000008000 - 000000b000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00017fc0 [ 0.000000] HighMem 0x00017fc0 -> 0x00017fc0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00017fc0 [ 0.000000] On node 0 totalpages: 98139 [ 0.000000] free_area_init_node: node 0, pgdat c077b840, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 736 pages used for memmap [ 0.000000] Normal zone: 93408 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 18000000 (gap: 18000000:e7b80000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1302000, static data 35068 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97371 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-13-generic root=UUID=b253a7e5-baa3-4bec-85a2-7ed2a0e565a2 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1964800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 371384k/392960k available (4544k kernel code, 20812k reserved, 2127k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd87c0000 - 0xff7fe000 ( 624 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd7fc0000 ( 383 MB) [ 0.000000] .init : 0xc0785000 - 0xc080c000 ( 540 kB) [ 0.000000] .data : 0xc05701f4 - 0xc07841a8 (2127 kB) [ 0.000000] .text : 0xc0100000 - 0xc05701f4 (4544 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 996.706 MHz processor. [ 0.001569] Console: colour VGA+ 80x25 [ 0.001580] console [tty0] enabled [ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 1993.41 BogoMIPS (lpj=3986824) [ 0.004069] Security Framework initialized [ 0.004135] AppArmor: AppArmor initialized [ 0.004155] Mount-cache hash table entries: 512 [ 0.004485] Initializing cgroup subsys ns [ 0.004497] Initializing cgroup subsys cpuacct [ 0.004507] Initializing cgroup subsys memory [ 0.004530] Initializing cgroup subsys freezer [ 0.004536] Initializing cgroup subsys net_cls [ 0.004573] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.004581] CPU: L2 cache: 256K [ 0.004606] Performance Counters: p6 PMU driver. [ 0.004647] ... version: 0 [ 0.004652] ... bit width: 32 [ 0.004657] ... generic counters: 2 [ 0.004662] ... value mask: 00000000ffffffff [ 0.004668] ... max period: 000000007fffffff [ 0.004674] ... fixed-purpose counters: 0 [ 0.004679] ... counter mask: 0000000000000003 [ 0.004690] Checking 'hlt' instruction... OK. [ 0.021234] SMP alternatives: switching to UP code [ 0.032057] Freeing SMP alternatives: 19k freed [ 0.032117] ACPI: Core revision 20090521 [ 0.041566] ACPI: setting ELCR to 0200 (from 0e00) [ 0.042831] weird, boot CPU (#0) not listed by the BIOS. [ 0.042839] SMP motherboard not detected. [ 0.044001] SMP disabled [ 0.044001] Brought up 1 CPUs [ 0.044001] Total of 1 processors activated (1993.41 BogoMIPS). [ 0.044001] CPU0 attaching NULL sched-domain. [ 0.044001] Booting paravirtualized kernel on bare hardware [ 0.044001] regulator: core version 0.5 [ 0.044001] Time: 15:37:37 Date: 10/14/09 [ 0.044001] NET: Registered protocol family 16 [ 0.044001] EISA bus registered [ 0.044001] ACPI: bus type pci registered [ 0.044001] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 [ 0.044001] PCI: Using configuration type 1 for base access [ 0.046403] bio: create slab at 0 [ 0.047677] ACPI: EC: Look up EC in DSDT [ 0.059470] ACPI: Interpreter enabled [ 0.059488] ACPI: (supports S0 S1 S4 S5) [ 0.059542] ACPI: Using PIC for interrupt routing [ 0.068301] ACPI: Power Resource [FDDP] (off) [ 0.068378] ACPI: Power Resource [URP1] (off) [ 0.068451] ACPI: Power Resource [URP2] (off) [ 0.068525] ACPI: Power Resource [LPTP] (off) [ 0.068780] ACPI: No dock devices found. [ 0.069389] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.069502] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff] [ 0.069733] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 0.069743] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO [ 0.069799] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.069873] pci 0000:00:1f.2: reg 20 io port: [0xef40-0xef5f] [ 0.069950] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefaf] [ 0.070021] pci 0000:00:1f.4: reg 20 io port: [0xef80-0xef9f] [ 0.070072] pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe8ff] [ 0.070084] pci 0000:00:1f.5: reg 14 io port: [0xef00-0xef3f] [ 0.070171] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.070184] pci 0000:02:00.0: reg 14 io port: [0xd800-0xd8ff] [ 0.070195] pci 0000:02:00.0: reg 18 32bit mmio: [0xfeaff000-0xfeafffff] [ 0.070220] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff] [ 0.070287] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.070295] pci 0000:00:01.0: bridge 32bit mmio: [0xfca00000-0xfeafffff] [ 0.070305] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf4700000-0xf47fffff] [ 0.070365] pci 0000:01:08.0: reg 10 32bit mmio: [0xfc9fe000-0xfc9fefff] [ 0.070377] pci 0000:01:08.0: reg 14 io port: [0xcf00-0xcf3f] [ 0.070425] pci 0000:01:08.0: supports D1 D2 [ 0.070432] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070441] pci 0000:01:08.0: PME# disabled [ 0.070492] pci 0000:01:0d.0: reg 10 io port: [0xc800-0xc8ff] [ 0.070504] pci 0000:01:0d.0: reg 14 32bit mmio: [0xfc9ffc00-0xfc9fffff] [ 0.070535] pci 0000:01:0d.0: reg 30 32bit mmio: [0xfc9c0000-0xfc9dffff] [ 0.070560] pci 0000:01:0d.0: supports D1 D2 [ 0.070566] pci 0000:01:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070575] pci 0000:01:0d.0: PME# disabled [ 0.070609] pci 0000:00:1e.0: transparent bridge [ 0.070618] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.070627] pci 0000:00:1e.0: bridge 32bit mmio: [0xfc900000-0xfc9fffff] [ 0.070636] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf4600000-0xf46fffff] [ 0.070654] pci_bus 0000:00: on NUMA node 0 [ 0.070666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.070876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.073758] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.073983] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12) [ 0.074203] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [ 0.074425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.074645] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.074866] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.075086] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [ 0.075309] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12) [ 0.075865] SCSI subsystem initialized [ 0.076140] libata version 3.00 loaded. [ 0.076375] usbcore: registered new interface driver usbfs [ 0.076423] usbcore: registered new interface driver hub [ 0.076501] usbcore: registered new device driver usb [ 0.076867] ACPI: WMI: Mapper loaded [ 0.076874] PCI: Using ACPI for IRQ routing [ 0.077225] Bluetooth: Core ver 2.15 [ 0.077336] NET: Registered protocol family 31 [ 0.077341] Bluetooth: HCI device and connection manager initialized [ 0.077350] Bluetooth: HCI socket layer initialized [ 0.077356] NetLabel: Initializing [ 0.077360] NetLabel: domain hash size = 128 [ 0.077365] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.077404] NetLabel: unlabeled traffic allowed by default [ 0.083694] pnp: PnP ACPI init [ 0.083772] ACPI: bus type pnp registered [ 0.091210] pnp: PnP ACPI: found 13 devices [ 0.091222] ACPI: ACPI bus type pnp unregistered [ 0.091234] PnPBIOS: Disabled by ACPI PNP [ 0.091270] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.091280] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.091289] system 00:0c: iomem range 0x100000-0x17ffffff could not be reserved [ 0.126230] AppArmor: AppArmor Filesystem Enabled [ 0.126266] pci 0000:01:0d.0: BAR 6: address space collision on of device [0xfc9c0000-0xfc9dffff] [ 0.126296] pci 0000:00:01.0: PCI bridge, secondary bus 0000:02 [ 0.126304] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.126314] pci 0000:00:01.0: MEM window: 0xfca00000-0xfeafffff [ 0.126324] pci 0000:00:01.0: PREFETCH window: 0xf4700000-0xf47fffff [ 0.126343] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.126350] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.126360] pci 0000:00:1e.0: MEM window: 0xfc900000-0xfc9fffff [ 0.126370] pci 0000:00:1e.0: PREFETCH window: 0xf4600000-0xf46fffff [ 0.126399] pci 0000:00:1e.0: setting latency timer to 64 [ 0.126410] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.126417] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.126425] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.126432] pci_bus 0000:02: resource 1 mem: [0xfca00000-0xfeafffff] [ 0.126439] pci_bus 0000:02: resource 2 pref mem [0xf4700000-0xf47fffff] [ 0.126447] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.126454] pci_bus 0000:01: resource 1 mem: [0xfc900000-0xfc9fffff] [ 0.126461] pci_bus 0000:01: resource 2 pref mem [0xf4600000-0xf46fffff] [ 0.126468] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.126475] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.126587] NET: Registered protocol family 2 [ 0.126865] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.127663] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.128112] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.128573] TCP: Hash tables configured (established 16384 bind 16384) [ 0.128582] TCP reno registered [ 0.128973] NET: Registered protocol family 1 [ 0.129220] Trying to unpack rootfs image as initramfs... [ 0.628133] Switched to high resolution mode on CPU 0 [ 0.679249] Freeing initrd memory: 7500k freed [ 0.716554] cpufreq-nforce2: No nForce2 chipset. [ 0.716653] Scanning for low memory corruption every 60 seconds [ 0.717018] audit: initializing netlink socket (disabled) [ 0.717074] type=2000 audit(1255534657.716:1): initialized [ 0.739414] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.743843] VFS: Disk quotas dquot_6.5.2 [ 0.744076] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.745819] fuse init (API version 7.12) [ 0.746066] msgmni has been set to 740 [ 0.746771] alg: No test for stdrng (krng) [ 0.746815] io scheduler noop registered [ 0.746821] io scheduler anticipatory registered [ 0.746827] io scheduler deadline registered [ 0.747002] io scheduler cfq registered (default) [ 0.747102] pci 0000:02:00.0: Boot video device [ 0.747137] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling [ 0.747354] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.747416] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.747744] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.747755] ACPI: Power Button [PWRF] [ 0.747881] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.747894] ACPI: Power Button [PBTN] [ 0.748347] processor LNXCPU:00: registered as cooling_device0 [ 0.752507] isapnp: Scanning for PnP cards... [ 1.108479] isapnp: No Plug & Play device found [ 1.111577] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.111757] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.111886] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.112541] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.112740] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.115438] brd: module loaded [ 1.116781] loop: module loaded [ 1.117046] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.117385] ata_piix 0000:00:1f.1: version 2.13 [ 1.117560] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.117857] scsi0 : ata_piix [ 1.118209] scsi1 : ata_piix [ 1.121781] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.121790] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.124446] Fixed MDIO Bus: probed [ 1.124544] PPP generic driver version 2.4.2 [ 1.124863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.124919] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.124959] uhci_hcd: USB Universal Host Controller Interface driver [ 1.125505] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.125514] PCI: setting IRQ 11 as level-triggered [ 1.125524] uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.125545] uhci_hcd 0000:00:1f.2: setting latency timer to 64 [ 1.125554] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 1.125734] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 1.125785] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ef40 [ 1.126043] usb usb1: configuration #1 chosen from 1 choice [ 1.126131] hub 1-0:1.0: USB hub found [ 1.126158] hub 1-0:1.0: 2 ports detected [ 1.126627] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 1.126636] PCI: setting IRQ 10 as level-triggered [ 1.126646] uhci_hcd 0000:00:1f.4: PCI INT C -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 1.126664] uhci_hcd 0000:00:1f.4: setting latency timer to 64 [ 1.126672] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 1.126776] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 [ 1.126817] uhci_hcd 0000:00:1f.4: irq 10, io base 0x0000ef80 [ 1.127051] usb usb2: configuration #1 chosen from 1 choice [ 1.127132] hub 2-0:1.0: USB hub found [ 1.127156] hub 2-0:1.0: 2 ports detected [ 1.127404] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.130360] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.130379] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.130582] mice: PS/2 mouse device common for all mice [ 1.130818] rtc_cmos 00:02: RTC can wake from S4 [ 1.130912] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.130943] rtc0: alarms up to one month, 114 bytes nvram [ 1.131260] device-mapper: uevent: version 1.0.3 [ 1.131579] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.131813] device-mapper: multipath: version 1.1.0 loaded [ 1.131821] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.132265] EISA: Probing bus 0 at eisa.0 [ 1.132315] EISA: Detected 0 cards. [ 1.132476] cpuidle: using governor ladder [ 1.132483] cpuidle: using governor menu [ 1.133983] TCP cubic registered [ 1.134444] NET: Registered protocol family 10 [ 1.135642] lo: Disabled Privacy Extensions [ 1.136552] NET: Registered protocol family 17 [ 1.136624] Bluetooth: L2CAP ver 2.13 [ 1.136629] Bluetooth: L2CAP socket layer initialized [ 1.136636] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.136641] Bluetooth: SCO socket layer initialized [ 1.136805] Bluetooth: RFCOMM TTY layer initialized [ 1.136814] Bluetooth: RFCOMM socket layer initialized [ 1.136819] Bluetooth: RFCOMM ver 1.11 [ 1.136886] Using IPI No-Shortcut mode [ 1.137123] PM: Resume from disk failed. [ 1.137159] registered taskstats version 1 [ 1.137426] Magic number: 13:248:639 [ 1.137587] rtc_cmos 00:02: setting system clock to 2009-10-14 15:37:38 UTC (1255534658) [ 1.137596] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.137601] EDD information not available. [ 1.284573] ata2.00: ATAPI: SONY CD-ROM CDU5221, 1.02, max UDMA/33 [ 1.292556] ata2.00: configured for UDMA/33 [ 1.292669] ata1.00: ATA-5: ST310212A, 3.02, max UDMA/66 [ 1.292677] ata1.00: 20005650 sectors, multi 32: LBA [ 1.292977] ata1.01: ATA-6: Maxtor 52049H4, DAC10SC0, max UDMA/100 [ 1.292985] ata1.01: 40020624 sectors, multi 16: LBA [ 1.308522] ata1.00: configured for UDMA/66 [ 1.324447] ata1.01: configured for UDMA/100 [ 1.324803] scsi 0:0:0:0: Direct-Access ATA ST310212A 3.02 PQ: 0 ANSI: 5 [ 1.325150] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.325351] scsi 0:0:1:0: Direct-Access ATA Maxtor 52049H4 DAC1 PQ: 0 ANSI: 5 [ 1.325597] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.325713] sd 0:0:0:0: [sda] 20005650 512-byte logical blocks: (10.2 GB/9.53 GiB) [ 1.325857] sd 0:0:0:0: [sda] Write Protect is off [ 1.325866] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.325939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.326317] sda: [ 1.327285] scsi 1:0:0:0: CD-ROM SONY CD-ROM CDU5221 1.02 PQ: 0 ANSI: 5 [ 1.330063] sr0: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray [ 1.330074] Uniform CD-ROM driver Revision: 3.20 [ 1.330359] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.330536] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.343652] sda1 sda2 < sda5 > [ 1.366070] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.366103] sd 0:0:1:0: [sdb] 40020624 512-byte logical blocks: (20.4 GB/19.0 GiB) [ 1.366238] sd 0:0:1:0: [sdb] Write Protect is off [ 1.366246] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.366316] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.366672] sdb: sdb1 sdb2 < sdb5 > [ 1.409696] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.409754] Freeing unused kernel memory: 540k freed [ 1.412110] Write protecting the kernel text: 4548k [ 1.412213] Write protecting the kernel read-only data: 1828k [ 1.934582] Floppy drive(s): fd0 is 1.44M [ 1.956248] FDC 0 is a post-1991 82077 [ 2.027646] Linux agpgart interface v0.103 [ 2.238525] agpgart-intel 0000:00:00.0: Intel i815 Chipset [ 2.243471] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 2.304956] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.304967] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.305519] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 2.305532] e100 0000:01:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 2.328910] e100 0000:01:08.0: PME# disabled [ 2.344120] Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 2.346571] e100: eth0: e100_probe: addr 0xfc9fe000, irq 11, MAC addr 00:03:47:a4:cc:6a [ 2.348723] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 [ 2.348740] tulip 0000:01:0d.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 [ 2.349301] tulip0: MII transceiver #1 config 3100 status 7849 advertising 05e1. [ 2.357234] eth1: ADMtek Comet rev 17 at Port 0xc800, 00:0c:41:e9:7b:50, IRQ 11. [ 3.833480] PM: Starting manual resume from disk [ 3.833499] PM: Resume from partition 8:5 [ 3.833504] PM: Checking hibernation image. [ 3.834045] PM: Resume from disk failed. [ 3.875809] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.875826] EXT4-fs (sda1): write access will be enabled during recovery [ 3.889679] EXT4-fs (sda1): barriers enabled [ 6.282674] kjournald2 starting: pid 308, dev sda1:8, commit interval 5 seconds [ 6.282742] EXT4-fs (sda1): delayed allocation enabled [ 6.282751] EXT4-fs: file extents enabled [ 6.284595] EXT4-fs: mballoc enabled [ 6.284646] EXT4-fs (sda1): orphan cleanup on readonly fs [ 6.284680] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 131226 [ 6.284792] EXT4-fs (sda1): 1 orphan inode deleted [ 6.284802] EXT4-fs (sda1): recovery complete [ 6.492215] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 7.906147] type=1505 audit(1255534665.268:2): operation="profile_load" pid=331 name=/usr/share/gdm/guest-session/Xsession [ 7.977600] type=1505 audit(1255534665.338:3): operation="profile_load" pid=332 name=/sbin/dhclient3 [ 7.978753] type=1505 audit(1255534665.338:4): operation="profile_load" pid=332 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 7.979392] type=1505 audit(1255534665.338:5): operation="profile_load" pid=332 name=/usr/lib/connman/scripts/dhclient-script [ 8.083598] type=1505 audit(1255534665.442:6): operation="profile_load" pid=333 name=/usr/bin/evince [ 8.102664] type=1505 audit(1255534665.462:7): operation="profile_load" pid=333 name=/usr/bin/evince-previewer [ 8.114484] type=1505 audit(1255534665.474:8): operation="profile_load" pid=333 name=/usr/bin/evince-thumbnailer [ 8.255881] type=1505 audit(1255534665.616:9): operation="profile_load" pid=335 name=/usr/lib/cups/backend/cups-pdf [ 8.257439] type=1505 audit(1255534665.618:10): operation="profile_load" pid=335 name=/usr/sbin/cupsd [ 8.579584] type=1505 audit(1255534665.941:11): operation="profile_load" pid=336 name=/usr/sbin/tcpdump [ 14.789826] Adding 473876k swap on /dev/sda5. Priority:-1 extents:1 across:473876k [ 14.953025] EXT4-fs (sda1): internal journal on sda1:8 [ 17.973178] type=1505 audit(1255534675.334:12): operation="profile_replace" pid=445 name=/usr/share/gdm/guest-session/Xsession [ 17.979002] type=1505 audit(1255534675.338:13): operation="profile_replace" pid=446 name=/sbin/dhclient3 [ 17.982473] type=1505 audit(1255534675.342:14): operation="profile_replace" pid=446 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 17.983129] type=1505 audit(1255534675.342:15): operation="profile_replace" pid=446 name=/usr/lib/connman/scripts/dhclient-script [ 18.004667] type=1505 audit(1255534675.366:16): operation="profile_replace" pid=447 name=/usr/bin/evince [ 18.023971] type=1505 audit(1255534675.382:17): operation="profile_replace" pid=447 name=/usr/bin/evince-previewer [ 18.037658] type=1505 audit(1255534675.398:18): operation="profile_replace" pid=447 name=/usr/bin/evince-thumbnailer [ 18.058385] type=1505 audit(1255534675.418:19): operation="profile_replace" pid=449 name=/usr/lib/cups/backend/cups-pdf [ 18.061162] type=1505 audit(1255534675.422:20): operation="profile_replace" pid=449 name=/usr/sbin/cupsd [ 18.068256] type=1505 audit(1255534675.430:21): operation="profile_replace" pid=450 name=/usr/sbin/tcpdump [ 22.618509] udev: starting version 147 [ 23.293826] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.550090] intel_rng: Firmware space is locked read-only. If you can't or [ 23.550096] intel_rng: don't want to disable this in firmware setup, and if [ 23.550100] intel_rng: you are certain that your system has a functional [ 23.550103] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 23.754640] udev: renamed network interface eth0 to eth1 [ 23.776189] udev: renamed network interface eth1_rename to eth0 [ 25.320658] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 25.320670] PCI: setting IRQ 9 as level-triggered [ 25.320680] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 25.320723] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 25.943509] intel8x0_measure_ac97_clock: measured 59216 usecs (3314 samples) [ 25.943521] intel8x0: clocking to 41169 [ 26.294210] parport_pc 00:0a: reported by Plug and Play ACPI [ 26.294247] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 28.349790] lp0: using parport0 (interrupt-driven). [ 28.960283] ppdev: user-space parallel port driver [ 29.620915] ip_tables: (C) 2000-2006 Netfilter Core Team [ 31.054648] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 32.816225] e100: eth1 NIC Link is Up 100 Mbps Half Duplex [ 32.816615] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 40.072016] eth0: no IPv6 routers present [ 43.648019] eth1: no IPv6 routers present [19476.802605] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [19476.804265] SGI XFS Quota Management subsystem [19477.165063] JFS: nTxBlock = 2967, nTxLock = 23737 [19477.254978] NTFS driver 2.1.29 [Flags: R/O MODULE]. [19477.346445] QNX4 filesystem 0.2.3 registered. [19478.322279] kjournald starting. Commit interval 5 seconds [19478.322316] EXT3-fs: mounted filesystem with writeback data mode. [19479.554559] kjournald starting. Commit interval 5 seconds [19479.554595] EXT3-fs: mounted filesystem with writeback data mode.