[ 0.000000] Linux version 2.6.22-12-generic (buildd@palmer) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sat Sep 22 18:14:28 GMT 2007 (Ubuntu 2.6.22-12.38-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) [ 0.000000] BIOS-e820: 000000001ff70000 - 000000001ff7e000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff7e000 - 000000001ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130928) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130928 [ 0.000000] HighMem 130928 -> 130928 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130928 [ 0.000000] On node 0 totalpages: 130928 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125842 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7450, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 1FF73AF2, 0044 (r1 IBM TP-1A 1200 LTP 0) [ 0.000000] ACPI: FACP 1FF73C00, 0081 (r1 IBM TP-1A 1200 IBM 1) [ 0.000000] ACPI: DSDT 1FF73CE7, A1EA (r1 IBM TP-1A 1200 MSFT 100000D) [ 0.000000] ACPI: FACS 1FF7F000, 0040 [ 0.000000] ACPI: SSDT 1FF73CB4, 0033 (r1 IBM TP-1A 1200 MSFT 100000D) [ 0.000000] ACPI: ECDT 1FF7DED1, 0052 (r1 IBM TP-1A 1200 IBM 1) [ 0.000000] ACPI: BOOT 1FF7DFD8, 0028 (r1 IBM TP-1A 1200 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) [ 0.000000] Built 1 zonelists. Total pages: 129906 [ 0.000000] Kernel command line: root=UUID=27de56ae-5bd2-4f4f-ac29-4e1f1cb9b326 ro vga=791 quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (0140d000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1132.424 MHz processor. [ 5.958905] Console: colour dummy device 80x25 [ 5.959370] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 5.959939] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 5.989761] Memory: 507788k/523712k available (2017k kernel code, 15396k reserved, 918k data, 364k init, 0k highmem) [ 5.989780] virtual kernel memory layout: [ 5.989782] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 5.989785] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 5.989788] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 5.989790] lowmem : 0xc0000000 - 0xdff70000 ( 511 MB) [ 5.989793] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 5.989795] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 5.989798] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 5.989804] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 5.989876] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 6.069879] Calibrating delay using timer specific routine.. 2269.61 BogoMIPS (lpj=4539234) [ 6.069927] Security Framework v1.0.0 initialized [ 6.069942] SELinux: Disabled at boot. [ 6.069969] Mount-cache hash table entries: 512 [ 6.070188] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 6.070208] CPU: L1 I cache: 16K, L1 D cache: 16K [ 6.070212] CPU: L2 cache: 512K [ 6.070218] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 6.070234] Compat vDSO mapped to ffffe000. [ 6.070253] Checking 'hlt' instruction... OK. [ 6.085990] SMP alternatives: switching to UP code [ 6.086200] Freeing SMP alternatives: 11k freed [ 6.086606] Early unpacking initramfs... done [ 6.633126] ACPI: Core revision 20070126 [ 6.633392] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 6.640464] ACPI: setting ELCR to 0200 (from 0800) [ 6.665868] CPU0: Intel Mobile Intel(R) Pentium(R) III CPU - M 1133MHz stepping 04 [ 6.665881] SMP motherboard not detected. [ 6.665886] Local APIC not detected. Using dummy APIC emulation. [ 6.665965] Brought up 1 CPUs [ 6.666211] Booting paravirtualized kernel on bare hardware [ 6.666303] Time: 13:53:15 Date: 08/23/107 [ 6.666356] NET: Registered protocol family 16 [ 6.666552] EISA bus registered [ 6.666571] ACPI: bus type pci registered [ 6.666883] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8 [ 6.666888] PCI: Using configuration type 1 [ 6.666891] Setting up standard PCI resources [ 6.671718] ACPI: EC: Found ECDT [ 6.682903] ACPI: Interpreter enabled [ 6.682909] ACPI: (supports S0 S3 S4 S5) [ 6.682938] ACPI: Using PIC for interrupt routing [ 6.694488] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 6.694574] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 6.694585] PCI: Probing PCI hardware (bus 00) [ 6.694917] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 6.694924] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 6.695316] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 6.695374] PCI: Transparent bridge - 0000:00:1e.0 [ 6.695528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 6.695625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 6.695662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 6.701381] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 6.701760] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 6.702082] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 6.702403] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 6.702723] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 6.703016] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 6.703311] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 6.703606] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 6.704076] ACPI: Power Resource [PUBS] (on) [ 6.704097] Linux Plug and Play Support v0.97 (c) Adam Belay [ 6.704117] pnp: PnP ACPI init [ 6.704132] ACPI: bus type pnp registered [ 6.710088] pnp: PnP ACPI: found 13 devices [ 6.710093] ACPI: ACPI bus type pnp unregistered [ 6.710100] PnPBIOS: Disabled by ACPI PNP [ 6.710198] PCI: Using ACPI for IRQ routing [ 6.710204] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 6.717893] NET: Registered protocol family 8 [ 6.717898] NET: Registered protocol family 20 [ 6.718011] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 6.718018] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 6.718023] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 6.718029] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 6.721700] Time: tsc clocksource has been installed. [ 6.748560] PCI: Bridge: 0000:00:01.0 [ 6.748563] IO window: disabled. [ 6.748569] MEM window: c0100000-c01fffff [ 6.748574] PREFETCH window: e0000000-ebffffff [ 6.748586] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 6.748590] IO window: 00002000-000020ff [ 6.748596] IO window: 00002400-000024ff [ 6.748601] PREFETCH window: f0000000-f3ffffff [ 6.748607] MEM window: c4000000-c7ffffff [ 6.748613] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 6.748617] IO window: 00002800-000028ff [ 6.748622] IO window: 00002c00-00002cff [ 6.748628] PREFETCH window: f4000000-f7ffffff [ 6.748634] MEM window: c8000000-cbffffff [ 6.748639] PCI: Bridge: 0000:00:1e.0 [ 6.748643] IO window: 2000-6fff [ 6.748650] MEM window: c0200000-cfffffff [ 6.748656] PREFETCH window: f0000000-f7ffffff [ 6.748674] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 6.749294] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 6.749300] PCI: setting IRQ 11 as level-triggered [ 6.749306] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 6.749872] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 6.749877] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 6.749905] NET: Registered protocol family 2 [ 6.789750] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 6.789848] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 6.790266] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 6.790620] TCP: Hash tables configured (established 16384 bind 16384) [ 6.790626] TCP reno registered [ 6.801991] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 7.274870] it is [ 7.840615] Freeing initrd memory: 7016k freed [ 7.840908] Simple Boot Flag at 0x35 set to 0x1 [ 7.841390] audit: initializing netlink socket (disabled) [ 7.841418] audit(1190555595.712:1): initialized [ 7.845452] VFS: Disk quotas dquot_6.5.1 [ 7.845583] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 7.845783] io scheduler noop registered [ 7.845789] io scheduler anticipatory registered [ 7.845793] io scheduler deadline registered [ 7.845830] io scheduler cfq registered (default) [ 7.845903] Boot video device is 0000:01:00.0 [ 7.846221] vesafb: framebuffer at 0xe8000000, mapped to 0xe0880000, using 3072k, total 15168k [ 7.846228] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 7.846233] vesafb: protected mode interface info at c000:9868 [ 7.846238] vesafb: pmi: set display start = c00c98ca, set palette = c00c9913 [ 7.846243] vesafb: scrolling: redraw [ 7.846249] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 7.846352] fb0: VESA VGA frame buffer device [ 7.846428] isapnp: Scanning for PnP cards... [ 8.156299] isapnp: No Plug & Play device found [ 8.207128] Real Time Clock Driver v1.12ac [ 8.207301] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 8.207409] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 8.207688] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 8.208676] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 8.210083] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 8.210470] input: Macintosh mouse button emulation as /class/input/input0 [ 8.210622] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 8.217805] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.217816] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.218121] mice: PS/2 mouse device common for all mice [ 8.218313] EISA: Probing bus 0 at eisa.0 [ 8.218326] Cannot allocate resource for EISA slot 1 [ 8.218332] Cannot allocate resource for EISA slot 2 [ 8.218336] Cannot allocate resource for EISA slot 3 [ 8.218340] Cannot allocate resource for EISA slot 4 [ 8.218344] Cannot allocate resource for EISA slot 5 [ 8.218348] Cannot allocate resource for EISA slot 6 [ 8.218358] EISA: Detected 0 cards. [ 8.218542] TCP cubic registered [ 8.218577] NET: Registered protocol family 1 [ 8.218631] Using IPI No-Shortcut mode [ 8.218947] Magic number: 7:464:888 [ 8.219085] hash matches device ptyuf [ 8.219147] hash matches device 0000:00:1f.1 [ 8.219636] Freeing unused kernel memory: 364k freed [ 8.253297] input: AT Translated Set 2 keyboard as /class/input/input1 [ 9.571637] AppArmor: AppArmor initialized<5>audit(1190555597.212:2): type=1505 info="AppArmor initialized" pid=1194 [ 9.587689] fuse init (API version 7.8) [ 9.596240] Failure registering capabilities with primary security module. [ 9.619283] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 9.622419] ACPI: Thermal Zone [THM0] (62 C) [ 10.487116] usbcore: registered new interface driver usbfs [ 10.487164] usbcore: registered new interface driver hub [ 10.487207] usbcore: registered new device driver usb [ 10.489765] USB Universal Host Controller Interface driver v3.0 [ 10.489896] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 10.489916] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 10.489922] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 10.490203] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 10.490237] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 10.490462] usb usb1: configuration #1 chosen from 1 choice [ 10.490526] hub 1-0:1.0: USB hub found [ 10.490540] hub 1-0:1.0: 2 ports detected [ 10.593326] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 10.593335] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 10.593353] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 10.593359] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 10.593405] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 10.593436] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 10.593637] usb usb2: configuration #1 chosen from 1 choice [ 10.593686] hub 2-0:1.0: USB hub found [ 10.593699] hub 2-0:1.0: 2 ports detected [ 10.697311] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 10.697321] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 10.697340] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 10.697346] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 10.697393] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 10.697426] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 10.697623] usb usb3: configuration #1 chosen from 1 choice [ 10.697673] hub 3-0:1.0: USB hub found [ 10.697687] hub 3-0:1.0: 2 ports detected [ 10.787490] SCSI subsystem initialized [ 10.805500] libata version 2.21 loaded. [ 10.814098] ata_piix 0000:00:1f.1: version 2.11 [ 10.814124] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 10.814140] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 10.814199] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 10.814411] scsi0 : ata_piix [ 10.814487] scsi1 : ata_piix [ 10.815236] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 [ 10.815244] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 [ 10.821386] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 10.821391] e100: Copyright(c) 1999-2006 Intel Corporation [ 10.929795] Floppy drive(s): fd0 is 1.44M [ 10.974069] FDC 0 is a National Semiconductor PC87306 [ 10.976800] ata1.00: ATA-6: HTS424030M9AT00, MAAIA75A, max UDMA/100 [ 10.976810] ata1.00: 58605120 sectors, multi 16: LBA [ 10.992754] ata1.00: configured for UDMA/100 [ 5.100000] Marking TSC unstable due to: possible TSC halt in C2. [ 5.104000] Time: acpi_pm clocksource has been installed. [ 5.236000] Clocksource tsc unstable (delta = -225799211 ns) [ 5.476000] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8081N, 0012, max UDMA/33 [ 5.664000] ata2.00: configured for UDMA/33 [ 5.664000] scsi 0:0:0:0: Direct-Access ATA HTS424030M9AT00 MAAI PQ: 0 ANSI: 5 [ 5.668000] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8081N 0012 PQ: 0 ANSI: 5 [ 5.672000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 5.672000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 5.696000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:CF:FC:56 [ 5.724000] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB) [ 5.724000] sd 0:0:0:0: [sda] Write Protect is off [ 5.724000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.724000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.724000] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB) [ 5.724000] sd 0:0:0:0: [sda] Write Protect is off [ 5.724000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.724000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.724000] sda: sda1 sda2 sda3 < sda5 > [ 5.776000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.784000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.784000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.828000] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray [ 5.828000] Uniform CD-ROM driver Revision: 3.20 [ 5.828000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.268000] Attempting manual resume [ 6.268000] swsusp: Resume From Partition 8:5 [ 6.268000] PM: Checking swsusp image. [ 6.268000] PM: Resume from disk failed. [ 6.284000] JFS: nTxBlock = 4025, nTxLock = 32207 [ 29.068000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.112000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.492000] Linux agpgart interface v0.102 (c) Dave Jones [ 29.532000] agpgart: Detected an Intel 830M Chipset. [ 29.548000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 30.436000] iTCO_vendor_support: vendor-support=0 [ 30.704000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:023b] [ 30.704000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 30.704000] Yenta: Routing CardBus interrupts to PCI [ 30.704000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64 [ 30.728000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 30.728000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060) [ 30.728000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 30.888000] intel_rng: FWH not detected [ 30.900000] input: PC Speaker as /class/input/input2 [ 30.936000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 30.936000] Socket status: 30000006 [ 30.936000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff [ 30.936000] cs: IO port probe 0x2000-0x6fff: clean. [ 30.936000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 30.936000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff [ 30.936000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:023b] [ 30.936000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 30.936000] Yenta: Routing CardBus interrupts to PCI [ 30.936000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64 [ 31.168000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 31.168000] Socket status: 30000020 [ 31.168000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff [ 31.168000] cs: IO port probe 0x2000-0x6fff: clean. [ 31.168000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 31.168000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff [ 31.192000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 31.204000] input: TPPS/2 IBM TrackPoint as /class/input/input3 [ 31.760000] irda_init() [ 31.760000] NET: Registered protocol family 23 [ 31.828000] pccard: CardBus card inserted into slot 1 [ 31.892000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 31.892000] nsc-ircc, chip->init [ 31.892000] nsc-ircc, Found chip at base=0x02e [ 31.892000] nsc-ircc, driver loaded (Dag Brattli) [ 31.892000] nsc_ircc_open(), can't get iobase of 0x2f8 [ 31.892000] nsc-ircc, Found chip at base=0x02e [ 31.892000] nsc-ircc, driver loaded (Dag Brattli) [ 31.892000] nsc_ircc_open(), can't get iobase of 0x2f8 [ 31.892000] pnp: Device 00:0c disabled. [ 31.976000] parport_pc 00:0b: reported by Plug and Play ACPI [ 31.976000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 32.064000] ath_hal: module license 'Proprietary' taints kernel. [ 32.068000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 32.432000] wlan: 0.8.4.2 (0.9.3.2) [ 32.636000] cs: IO port probe 0x100-0x3af: clean. [ 32.640000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 32.640000] cs: IO port probe 0x820-0x8ff: clean. [ 32.640000] cs: IO port probe 0xc00-0xcf7: clean. [ 32.640000] cs: IO port probe 0xa00-0xaff: clean. [ 32.640000] cs: IO port probe 0x100-0x3af: clean. [ 32.640000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 32.644000] cs: IO port probe 0x820-0x8ff: clean. [ 32.644000] cs: IO port probe 0xc00-0xcf7: clean. [ 32.644000] cs: IO port probe 0xa00-0xaff: clean. [ 32.796000] ath_pci: 0.9.4.5 (0.9.3.2) [ 32.796000] PCI: Enabling device 0000:07:00.0 (0000 -> 0002) [ 32.796000] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 33.408000] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001) [ 33.408000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 33.408000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 33.440000] ath_rate_sample: 1.2 (0.9.3.2) [ 33.440000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 33.440000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 33.440000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 33.440000] wifi0: mac 7.8 phy 4.5 radio 5.6 [ 33.440000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 33.440000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 33.440000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 33.440000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 33.440000] wifi0: Use hw queue 8 for CAB traffic [ 33.440000] wifi0: Use hw queue 9 for beacons [ 33.480000] wifi0: Atheros 5212: mem=0xc8000000, irq=11 [ 34.120000] intel8x0_measure_ac97_clock: measured 55636 usecs [ 34.120000] intel8x0: clocking to 48000 [ 34.480000] loop: module loaded [ 34.528000] lp0: using parport0 (interrupt-driven). [ 34.704000] Adding 666656k swap on /dev/sda5. Priority:-1 extents:1 across:666656k [ 39.000000] ACPI: AC Adapter [AC] (on-line) [ 39.100000] ACPI: Battery Slot [BAT0] (battery present) [ 39.164000] ACPI: ACPI Dock Station Driver [ 39.172000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 39.172000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 39.172000] ACPI: Error installing bay notify handler [ 39.172000] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 39.280000] input: Power Button (FF) as /class/input/input4 [ 39.280000] ACPI: Power Button (FF) [PWRF] [ 39.316000] input: Lid Switch as /class/input/input5 [ 39.316000] ACPI: Lid Switch [LID] [ 39.332000] input: Sleep Button (CM) as /class/input/input6 [ 39.332000] ACPI: Sleep Button (CM) [SLPB] [ 39.704000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 44.000000] ttyS1: LSR safety check engaged! [ 44.456000] NET: Registered protocol family 10 [ 44.456000] lo: Disabled Privacy Extensions [ 44.456000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.900000] ppdev: user-space parallel port driver [ 45.804000] audit(1190548440.261:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4638 profile="/usr/sbin/cupsd" [ 46.008000] IBM machine detected. Enabling interrupts during APM calls. [ 46.008000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 46.008000] apm: overridden by ACPI. [ 46.316000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 46.316000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 46.316000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 46.324000] thinkpad_acpi: another device driver is already handling bay events [ 46.324000] thinkpad_acpi: disabling subdriver bay [ 46.488000] Non-volatile memory driver v1.2 [ 46.592000] input: /usr/sbin/thinkpad-keys as /class/input/input7 [ 46.912000] Failure registering capabilities with primary security module. [ 51.000000] [drm] Initialized drm 1.1.0 20060810 [ 51.040000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 51.044000] [drm] Initialized savage 2.4.1 20050313 on minor 0 [ 51.044000] mtrr: base(0xe4000000) is not aligned on a size(0x5000000) boundary [ 51.044000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 51.044000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [ 51.044000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [ 54.876000] ath0: no IPv6 routers present [ 153.268000] NET: Registered protocol family 17 [ 173.084000] ath0: no IPv6 routers present